Senao Co OC86706001 IEEE802.11a/g/b NWH3054A WLAN mini-PCI User Manual NWH3054A miini PCI SPEC ADT

Download:
Mirror Download [FCC.gov]
Document ID	755540
Application ID	yDC8QLEUG+6j3FZrC09g/Q==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.18kB (202277 bits)
Date Submitted	2007-02-06 00:00:00
Date Available	2007-02-06 00:00:00
Creation Date	2007-02-06 14:16:15
Producing Software	AFPL Ghostscript 8.54
Document Lastmod	2007-02-06 14:20:21
Document Title	NWH3054A-miini-PCI-SPEC-ADT
Document Creator	PDFCreator Version 0.9.2
Document Author:	Cathy

National Datacomm Corporation (NDC)
ISO 9000 Certified
IEEE802.11a/g/b
NWH3054A WLAN mini-PCI
Product Specification
DOC. ID: PD-NWH3054-mini-PCI-SPEC-0.01
FILENAME:
PRODUCT:
REVISION NO: 1.0
NUMBER OF PAGES: 5
STATUS: Released
CREATED ON: 14-September-2006
LAST REVISED: 14-September-2006
CREATEDED BY:
NAME:
APPROVED BY:
NAME: Jerome Wu
Director of Product Development
SIGNATURE:
DATE:
SIGNATURE:
DATE:
Revision 1.0
NWH3054A WLAN PC Card
NDC
Change History
Date
Location
Description
All information disclosed herein is the property of National DataComm Corporation and is STRICTLY CONFIDENTIAL AND
PROPRIETARY. Any reproduction or distribution of this information, in whole or part, or the divulgence of any portion of the
contents of same, to other than internal company recipients without prior written permission of National DataComm Corporation . is
prohibited.
Sept.14th 2006
Page 2
Revision 1.0
NWH3054A WLAN PC Card
NDC
Table of Contents
1.
PRODUCT DESCRIPTION .................................................................................................................4
1.1
WIRELESS LAN RADIO MODULE ......................................................................................................4
1.1.1
General ....................................................................................................................................4
1.1.2
Specification for Radio characteristic .....................................................................................4
1.1.3
Digital hardware specification ................................................................................................4
1.1.4
Radio Power consumption.......................................................................................................4
1.2
MECHANICAL SPECIFICATION............................................................................................................5
1.3
OPERATION TEMPERATURE ...............................................................................................................5
1.4
REGULATION COMPLIANCE ...............................................................................................................5
All information disclosed herein is the property of National DataComm Corporation and is STRICTLY CONFIDENTIAL AND
PROPRIETARY. Any reproduction or distribution of this information, in whole or part, or the divulgence of any portion of the
contents of same, to other than internal company recipients without prior written permission of National DataComm Corporation . is
prohibited.
Sept.14th 2006
Page 3
Revision 1.0
NWH3054A WLAN PC Card
NDC
NWH3054 WLAN mini-PCI Bus Adapter Product Specification
1. Product Description
NWH3054A is an IEEE802.11a/g/b compliant WLAN mini-PCI module. The radio system is based on Zydas
ZD1212B MAC/Base band processor together with Alhora’s AL7230 radio transceiver. An additional PA is
used to enhance the transmitter’s power to extend the radio communication.
1.1 Wireless LAN Radio module
1.1.1 General
Standards:
Data Rate:
IEEE802.11a/g/b Compliance
11a : 54M/48M/36M/24M/18M/12M/9M/6M
11g : 54M/48M/36M/24M18M/12M/9M/6M
11b: 11Mbps /5.5 Mbps/2 Mbps/1Mbps
CSMA/CA
WEP 256bits/128 bits/64 bits
IPEX connector x 2
45 mm x 60 mm
Communication method:
Security:
Antenna connector
Dimension:
1.1.2 Specification for Radio characteristic
FCC part 15 compliant
Item
Operating frequency
Specification
802.11a/g/b:
USA: 2.400 – 2.483GHz, 5.725 ~ 5.825Ghz
Europe: 2.400 – 2.483GHz, 5.725 ~ 5.825Ghz
China: 2.400 – 2.483GHz, 5.725 ~5.85Ghz
Transmitting Power
17.5 dbm for 11a at 5.8Ghz at 54M OFDM modulation
14 dbm for 11g at 54M bps OFDM mode
15 dbm for 11b at 11MM bps CCK mode
-72 dBm for 54 Mbps(11a Typical)
-72 dBm for 54 Mbps(11g Typical)
-82dBm for 11 Mbps(11b Typical)
Receiving Sensitivity
1.1.3 Digital hardware specification
Mini-PCI Bus:
Combo MAC/Base band:
Radio transceiver
Data width:
Mini-PCI Interface
ZD1212B
Alroha AL7230
32 bits
1.1.4 Radio Power consumption
Power Supply:
3.3 Volt ± 5 % provided by Host computer
All information disclosed herein is the property of National DataComm Corporation and is STRICTLY CONFIDENTIAL AND
PROPRIETARY. Any reproduction or distribution of this information, in whole or part, or the divulgence of any portion of the
contents of same, to other than internal company recipients without prior written permission of National DataComm Corporation . is
prohibited.
Sept.14th 2006
Page 4
Revision 1.0
NWH3054A WLAN PC Card
NDC
Power consumption:
450 mA (Radio Transmission) maximum
3000 mA (Radio Receiving)
1.2 Mechanical specification
Dimension:
Weight:
Connector part type:
60 mm length x 45 mm width
12 grams
mini-PCI Bus connector
1.3 Operation temperature
Operational
from -10 C゜to +70 C(Radio performance degrade is excluded)
1.4 Regulation compliance
FCC part 15 class B compliant
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
All information disclosed herein is the property of National DataComm Corporation and is STRICTLY CONFIDENTIAL AND
PROPRIETARY. Any reproduction or distribution of this information, in whole or part, or the divulgence of any portion of the
contents of same, to other than internal company recipients without prior written permission of National DataComm Corporation . is
prohibited.
Sept.14th 2006
Page 5
-
Revision 1.0
NWH3054A WLAN PC Card
NDC
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only IEEE 802.11b or 802.11g
operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and
users, and
2) The transmitter module may not be co-located with any other transmitter or antenna,
3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11
for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or
info to the end-user regarding to Regulatory Domain change.
As long as 3 conditions above are met, further transmitter test will not be required. However, the
OEM integrator is still responsible for testing their end-product for any additional compliance
requirements required with this module installed (for example, digital device emissions, PC
peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID can not be used on the final product. In these circumstances, the
OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
2. End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed
such that 20 cm may be maintained between the antenna and users. The final end product must be
labeled in a visible area with the following: “Contains FCC ID: NI3-OC86706001”.
3. Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module. The end
user manual shall include all required regulatory information/warning as show in this manual.
All information disclosed herein is the property of National DataComm Corporation and is STRICTLY CONFIDENTIAL AND
PROPRIETARY. Any reproduction or distribution of this information, in whole or part, or the divulgence of any portion of the
contents of same, to other than internal company recipients without prior written permission of National DataComm Corporation . is
prohibited.
Sept.14th 2006
Page 6

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print
XMP Toolkit                     : 3.1-701
About                           : 386ca122-b805-11db-0000-31f57e6254b2
Producer                        : AFPL Ghostscript 8.54
Modify Date                     : 2007:02:06 14:20:21+08:00
Create Date                     : 2007:02:06 14:16:15+08:00
Creator Tool                    : PDFCreator Version 0.9.2
Metadata Date                   : 2007:02:06 14:20:21+08:00
Document ID                     : 386ca122-b805-11db-0000-31f57e6254b2
Instance ID                     : uuid:009d842c-ea67-425a-9655-0241795f57bf
Format                          : application/pdf
Title                           : NWH3054A-miini-PCI-SPEC-ADT
Creator                         : Cathy
Page Count                      : 6
Author                          : Cathy

EXIF Metadata provided by EXIF.tools