Senao Networks OAP8250AG Outdoor Wireless Access Point User Manual OAP8250AG installation guide v041

Download:
Mirror Download [FCC.gov]
Document ID	3113634
Application ID	9Ev7jYVIMGoF+GYDUZiNpw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.54kB (969302 bits)
Date Submitted	2016-08-26 00:00:00
Date Available	2016-08-31 00:00:00
Creation Date	2016-08-25 03:41:18
Producing Software	Mac OS X 10.9 Quartz PDFContext
Document Lastmod	2016-08-25 03:41:18
Document Title	OAP8250AG installation guide_v041
Document Creator	Word
Document Author:	Terri

OAP8250AG/OAP8251AG
Installation Guide
Outdoor Enterprise AP
V. 0.4
P RO DU CT D ESCRIPTIO N
OAP8250AG is Senao new generation of outdoor Enterprise AP with 4x4
MU-MIMO technology implement.
It is using Qualcomm total solution to provide
the maximum throughput on the WIFI.
OAP8250AG is internal antenna model.
OAP8251AG is external antenna model.
Any installation to OAP8250AG applies to both models.
▌PACKAGE CONTENT
Ø
OAP8250AG or OAP8251AG Access Point
Ø
OAP8250AG/OAP8251AG Quick Start Guidet
Ø
Mounting Bracket
Ø
PoE injector
Ø
Mounting Kit Package (includes hex cap screws, washers, wall anchors and bolts,
ring clamp)
Ø
Ground Cables
Ø
Packaged Ground Screw
Ø
Pole Mounting Bracket
Ø
5GHz Omni-directional antennas
Ø
2.4GHz Omni-directional antennas
▌CONNECT TO THE OAP8250AG/OAP8251AG ACCESS POINT
1. Attach and gently tighten the provided antennas to the appropriate port on the
OAP8251AG
2. Use the M4 ground screw assembly with the wave washer, to attach the ground wire’s
ring terminal to the AP. The wire should be as close to the AP bottom as possible.
3. Power is provided through Power over Ethernet based on 802.3at (PoE+) compliant switch
or PoE+ injector.
▌MOUNTING OF THE OAP8250AG/OAP8251AG ACCESS POINT
WALL MOUNT BRACKET
1. Attach the AP to the ‘H’ Shape bracket.
2. Secure the anchor to the wall then screw in the ‘H’ Shape bracket into the anchors in 4 corners.
Pole mounting
Mounting	
  the	
  AP	
  with	
  4	
  drill	
  holes	
  into	
  flat	
  wall	
  or	
  solid	
  ceiling	
  mounting.	
  
  
1. Attach	
  the	
  square	
  bracket	
  onto	
  H	
  shape	
  bracket	
  for	
  pole	
  mounting.	
  
  
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   	
   After	
  
BEFORE	
   	
  
FCC Statement:
Federal Communication Commission Interference Statement
This	
   equipment	
   has	
   been	
   tested	
   and	
   found	
   to	
   comply	
   with	
   the	
   limits	
   for	
   a	
   Class	
   A	
  
digital	
   device,	
   pursuant	
   to	
   part	
   15	
   of	
   the	
   FCC	
   Rules.	
   These	
   limits	
   are	
   designed	
   to	
  
provide	
   reasonable	
   protection	
   against	
   harmful	
   interference	
   when	
   the	
   equipment	
   is	
  
operated	
   in	
   a	
   commercial	
   environment.	
   This	
   equipment	
   generates,	
   uses,	
   and	
   can	
  
radiate	
  radio	
  frequency	
  energy	
  and,	
  if	
  not	
  installed	
  and	
  used	
  in	
  accordance	
  with	
  the	
  
instruction	
   manual,	
   may	
   cause	
   harmful	
   interference	
   to	
   radio	
   communications.	
  
Operation	
   of	
   this	
   equipment	
   in	
   a	
   residential	
   area	
   is	
   likely	
   to	
   cause	
   harmful	
  
interference	
  in	
  which	
  case	
  the	
  user	
  will	
  be	
  required	
  to	
  correct	
  the	
  interference	
  at	
  his	
  
own	
  expense.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11
can be operated. Selection of other channels is not possible.
This device and it's antennas(s) must not be co-located or operating in conjunction with any
other antenna or transmitter except in accordance with FCC multi-transmitter product
procedures.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 25 cm between the radiator & your body.
Professional installation is required.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 5
PDF Version                     : 1.4
Title                           : OAP8250AG installation guide_v041
Author                          : Terri
Subject                         : 
Producer                        : Mac OS X 10.9 Quartz PDFContext
Creator                         : Word
Create Date                     : 2016:08:25 03:41:18Z
Modify Date                     : 2016:08:25 03:41:18Z
Apple Keywords                  : 

EXIF Metadata provided by EXIF.tools