Senao Networks PCE4550AH 802.11 a/n/ac Module User Manual WUG2650 MNL
Senao Networks, Inc. 802.11 a/n/ac Module WUG2650 MNL
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1975134 |
| Application ID | sm4ClC/0UCLc4Bl88qo4Yg== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 8.03kB (100403 bits) |
| Date Submitted | 2013-05-27 00:00:00 |
| Date Available | 2013-05-27 00:00:00 |
| Creation Date | 2017-10-27 07:25:39 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-27 07:25:39 |
| Document Title | WUG2650 MNL |
| Document Creator | Acrobat PDFMaker 11 Word 版 |
| Document Author: | Annie |
802.11 a/n/ac Module PCE4550AH User’s Manual PRODUCT DESCRIPTION The PCE4550AH is a 5G dual band concurrent 3T3R PCIe module base on QCA9880 commercial grade solution. PRODUCT SPECIFICATION RF Specification Radio 1 Frequency Band Support 5GHz 802.11a/n/ac 5.190~5.795GHz Data rate 1300Mbps Receive Sensitivity (Typical) 802.11a 802.11a/ n_HT20 802.11n_HT40 802.11ac_HT80 ≤ -94dBm@6Mbps ≤ -76dBm@54Mbps ≤ -93dBm @ MCS0/8/16 ≤ -74dBm @ MCS7/15/23 ≤ -92dBm @ MCS0/8/16 ≤ -72dBm @ MCS7/15/23 ≤ -89dBm@MCS0 ≤ -64dBm@MCS9 Type Connector 5150~5250MHz 5250~5350MHz 5470~5725MHz 5725~5850MHz Dipole UFL 3dBi 3dBi 3dBi 3dBi Dipole PIFA UFL UFL 5.5 dBi 6 dBi 5.5 dBi 6 dBi 5.5 dBi 6 dBi 5.5 dBi 6 dBi Note: The EUT has three antennas. (3TX/3RX) Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. IC statement is required to be available in the users manual: This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. -2- Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. occur in a particular installation. However, there is no guarantee that interference will not If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. -3- This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. -4- End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: U2M-PCE4550AH”. -5- Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. -6- Professional installation instruction 1. Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. 2. Installation location The product shall be installed at a location where the radiating antenna can be kept 20 cm from nearby person in normal operation condition to meet regulatory RF exposure requirement. 3. External antenna Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC limit and is prohibited. 4. Installation procedure Please refer to user’s manual for the detail. 5. Warning Please carefully select the installation position and make sure that the final output power does not exceed the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty. Professional installation instructions include power setting for collocation antennas and are provided to qualified installation person for module setting up. -7-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Author : Annie Create Date : 2013:05:24 13:33:31+08:00 Modify Date : 2013:05:24 13:33:32+08:00 Subject : Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2013:05:24 13:33:32+08:00 Creator Tool : Acrobat PDFMaker 11 Word 版 Document ID : uuid:a38cae58-0ae0-4880-9187-997b9a75a66b Instance ID : uuid:0fc2c26d-8206-4816-8002-e6796f024722 Format : application/pdf Title : WUG2650 MNL Description : Creator : Annie Producer : Adobe PDF Library 11.0 Keywords : Source Modified : D:20130524041605 Company : Sporton International Inc. Page Layout : OneColumn Page Count : 7EXIF Metadata provided by EXIF.tools