Senao Networks ZF7731 Zone Flex 7731 802.11n Outdoor Point to Point Bridge User Manual

Senao Networks, Inc. Zone Flex 7731 802.11n Outdoor Point to Point Bridge Bali GSG

a href="https://usermanual.wiki/Senao-Networks" itemprop="url"> Senao Networks >

MANUAL 2

43 Physical InstallationDeploying the Wireless BridgeWARNING: Do not apply power to the Wireless Bridge at this point. You should connect the Wireless Bridge to a power source only after you finish connecting all other components in “Step 3: Connect the Wireless Bridge to the Network” on page 44.Figure 37. Install the white P-clip cable clamp P-clip Cable ClampSealing StripCAUTION: If you are not connecting the DC cable to the DC terminal block, make sure you cover the right cable groove with the supplied sealing plug.You have completed setting up the DC power connection.
Download:
Mirror Download [FCC.gov]
Document ID1414284
Application IDefPjuEca9bod/Nc32wGKfw==
Document DescriptionMANUAL 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize85.03kB (1062892 bits)
Date Submitted2011-02-08 00:00:00
Date Available2011-02-11 00:00:00
Creation Date2011-02-08 18:01:14
Producing SoftwareAcrobat Distiller 9.2.0 (Windows)
Document Lastmod2011-02-08 18:01:22
Document TitleBali GSG.book
Document CreatorFrameMaker 9.0
Document Author: Administrator
FCC ID Filing: U2M-ZF7731

Navigation menu