Sengled E13N11 Lyric D6 Pro Ductless Controller User Manual E13 N11 user manual

Sengled Co.,Ltd. Lyric D6 Pro Ductless Controller E13 N11 user manual

Contents

E13-N11_user_manual

E13-N11
Features • On/Off and dimming via mobile app, home hub display, as well as web portal. • Report the current power consumption • Compatible with most smart home hubs supporting Zigbee HA 1.2.1 to control lighting schedules rules, and more. • Sensors supported in local and smart mode. • Light bulb will turn on 90s when any motion is detected in night mode with12 meters. • Zigbee Alliance certified. Package Includes • One E13-N11 Bulb • One quick start guide • One welcome card and user manual on line Product Specifications • Input: 120 Vac, 60 Hz, 115mA • Power: 14.0 Watts • Brightness: 1050 lumens • Light Socket: E26 • Color Temperature: 3000K soft white • CRI: > 90 • Beam Angle: 40 degrees • Sensor Range: Up to 12m, 100° • Operating Temperature: -4℉ ~ +104 ℉ • Operating Humidity: 0% ~ 95% RH, non-condensing
• Sensor Smart control
. FCC ID: 2AGN8-E13N11 IC: 20888-E13N11
FCC RegulationsThis device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.Changes or modifications not expressly approved by the manufacturer could void theuser’s authority to operate the equipment.The antenna(s) used for this transmitter must not be co-located or operating in conjunctionwith any other antenna or transmitter.This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.Consult the dealer or an experienced radio/TV technician for help. Radio Frequency (RF) Energy . This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. . The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20cm from all persons.
Canada Regulations:This device complies with Industry Canada’s licence-exempt RSSs. Operation issubject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may causeundesired operation of the device.Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux appareilsradio exempts de licence. L’exploitationestautorisée aux deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage;(2) l’utilisateur de l’appareildoit accepter tout brouillageradioélectriquesubi, mêmesi lebrouillageest susceptible d’encompromettre le fonctionnement.Caution：A label with the following statements must be attached to the host end product: This devicecontains IC: 20888-E13N11.Une étiquette avec les instructions suivantes doit être attachée au produit final hôte:Cet appareil contient IC: 20888-E13N11.

Navigation menu