SenseGiz Technologies Pvt SENSEGIZFIND FIND User Manual
SenseGiz Technologies Pvt Ltd FIND
User Manual
FIND
Quick Installation Manual
v0.1
Box Contents
CR1632 Coin cell
Lid opener
1. Let’s setup your FIND
Installation requires
compatible Smartphone /
tablet. No installation from
computer / laptop.
Supported Device:
iOS devices (running version 6.1.3 or newer) with Bluetooth 4.0 built
in: iPhone 4s, iPhone 5, iPhone 5c, iPhone 5s, iPad 3rd, 4th generation,
iPod touch 5th generation, iPad mini or newer.
Android devices (running version 4.3 and above) with Bluetooth 4.0
built in.
2. Turn ON FIND
(i) Rotate lid using flat screw driver in clockwise direction to open the casing
lid.
(ii) After lid is opened, place the coin cell with positive terminal of battery
facing top as shown in picture below. Place the black O-Ring, then place the
lid & rotate screw driver in anti-clockwise direction to close the casing lid.
APP Installation in iOS
Install FIND app from APP store
APP Installation in iOS
Click on Settings to set Bluetooth ON
APP Installation in iOS
Turn Bluetooth ON
APP Installation in iOS
Open FIND app
APP Installation in iOS
FIND app splash screen.
APP Installation in iOS
User needs to Sign up first time when app is used.
APP Installation in iOS
Fill all details
APP Installation in iOS
Log into the app.
APP Installation in iOS
You can see FIND detected in the app.
APP Installation in Android
Install “FIND app” from Play store.
APP Installation in Android
Turn On Bluetooth.
APP Installation in Android
Open FIND app.
APP Installation in Android
User needs to Sign-up to use app for first time.
APP Installation in Android
Fill all details
APP Installation in Android
Log into the app.
APP Installation in Android
By default, FIND will be detected.
Compliance Information
North America
United States: Federal Communications Commission [FCC]
FCC ID: 2ABSMSENSEGIZFIND
INFORMATION TO USER:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired
operation
RF Exposure Warning
The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s)
used for this transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
WARNING:
The changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Canada: Industry Canada [IC]
IC : 11734A-SENSGIZFIND
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Industry Canada - Class B This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital
Compliance Information
Apparatus,” ICES-003 of Industry Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques
de Classe B prescrites dans la norme sur le matérial brouilleur: “Appareils Numériques,” NMB-003 édictée
par l’Industrie.
RF exposure warning:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
Avertissement d'exposition RF:
1. Cet émetteur ne doit pas n'être coïmplanté ou opération en même temps qu'aucune autre antenne ou
émetteur.
2. Cet équipement est conforme aux limites d'exposition de rayonnement de la FCC rf déterminées pour un
environnement non contrôlé.
European Union
European Union: CE directive
STATEMENT: Hereby, SenseGiz Technologies Pvt Ltd, declares that FIND is in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Australia + New Zealand:
ACMA
Visit us: www.sensegiz.com/find/
For suggestions / feedback: support@sensegiz.com ,
info@sensegiz.com
For business enquires: marketing@sensegiz.com
Follow us at:
SenseGiz Technologies Pvt Ltd | v 0.1 | Jan 28th, 2014
© 2014 SenseGiz. All right reserved.
iOS, iPad, iPhone and iPod touch are trademarks of Apple inc.
Android is a trademark of Google Inc.