Seoultek Valley ABT-C100 Bluetooth carkit User Manual
Seoultek Valley Co., Ltd Bluetooth carkit
User manual
![](/img.php?id=1006470&img=bg1.png)
SEOULTEK VALLEY
Bluetooth Handsfree
Carkit
(ABT-C100)
User Guide
![](/img.php?id=1006470&img=bg2.png)
Special Features
01
Contents
1. About your ABT-C100
2. Getting started
Special
Features
1. Easy connection for two drivers
Two keys for connection One for main
2.
Getting
started
(1) Charging ABT-C100
(2) Turning ABT-C100 on and off
(3) Pairing and Connecting ABT-C100 with
gateway devices (mobile phone)
Two
keys
for
connection
.
One
for
main
driver, the other for second driver.
2 Sound option
(4) Connecting to the registered device
(5) Connecting ABT-C100 to your
computer
3. Using your ABT-C100
()
2
.
Sound
option
Option to use car radio system for
telephone call and stereo music
listening.
(
1
)
Calling
(2) Audio Listening
(3) Speaker or FM transmitter
(5) Controlling ABT-C100
(6) State of ABT
-
C100
3. Wireless stereo music player
Sim
p
le wireless stereo s
p
eaker for
(6)
State
of
ABT
-
C100
4. Annex
(1) Troubleshooting & FAQ
(2) Description on some terminology
(3)
Safety
and
general
information
pp
computer and mobile phone to
listen to stereo music and phone
call.
(3) Safety and general information
(4) FCC Statement
(5) European Union Notice
(6) Safety
(7) WEEE symbol information
4. Acoustic echo cancellation and
noise reduction algorithm applied
(8) Warranty
![](/img.php?id=1006470&img=bg3.png)
03
02
1. About your ABT-C100
(1) Components (2) Illustration
Pl /
P
User2
User1 FM Talk
Pl
a
y/
Pause
P
ower
on/off
<ABT
C100> <Ch i C bl >
-+ RWD FWD
Integrated
Speaker_
Lft
Integrated
Speaker_
Ri ht
Red
LED
Blue
LED
<ABT
-
C100>
<Ch
arg
i
ng
C
a
bl
e
>
*Bluetooth gateway devices: Bluetooth devices playing a gateway role
such as mobile phone,MP2 player, and audio dongle, etc.
L
e
ft
Right
(3) How to use buttons
The buttons on your ABT-C100 perform the different functions
depending on how long you press them.
<User’s Guide> <Sun visor Clip> Instruction Duration of press
Long Press Approx. : 1 second
(Short) Press Approx. : 0.5 second
![](/img.php?id=1006470&img=bg4.png)
05
04
(4) Install
< Sun visor In a car> <On the table>
김치낸장고에
붙여 사용하는
모습
회의하면서
스피커폰으로
사용하는
모습
< Metal Frame of Computer> <In a kitchen>< In a conference room >
모습
사용하는
모습
![](/img.php?id=1006470&img=bg5.png)
07
06
2. Getting started
(1) Charging ABT-C100
Connect the USB side of the charging cable to the USB port of your
computer and the mini-USB side of the cable to your ABT-C100.
The Red LED will be turned on when charging and turned off when fully
charged. It takes approximately 3 hours to fully charge the unit.
<Battery Charging>
Charging time
Operating time
Talk time Standby time Play time
About 3 hours About 18 hours About 500 About 12 hours
ABT-C100 can be charged with any standard USB to Mini-USB cable
from +5V USB port of your computer. Furthermore, any user provided
hbdifthlttiidbt+45Vt
Checking the battery charge
Remaining charge approximation is provided in ABT-C100. To check the
remaining battery charge, press and hold the +(volume up) button
hours
c
h
ar
g
er ma
y
b
e use
d
if
th
e vo
lt
a
g
e ra
ti
n
g
res
id
es
b
e
t
ween
+4
.
5V
t
o
+5.5V.
If more than +7V is provided, the integrated over-voltage circuit
starts to operate and the circuit cuts out the power to prevent the
And -(volume down) button simultaneously until the LED flickers.
The meaning of the LED flickering is as follows
starts
to
operate
and
the
circuit
cuts
out
the
power
to
prevent
the
internal charging circuit from damaged. After return to rated voltage
ranges, the charge circuit starts to charge again.
The t
yp
e of the char
g
in
g
connector of ABT-C100 is mini-USB T
yp
e-B.
Remaining amount LED status
About 80 ~100% Red LED and Blue LED blink 3 times
simultaneously.
About 20 ~ 80% Blue LED blinks 3 times.
yp g g
yp
About 5 ~ 20% Red LED blinks 3 times.
![](/img.php?id=1006470&img=bg6.png)
09
08
(2) Turning ABT-C100 on and off
Turning on
(3) Pairing and Connecting ABT-C100 with
gateway devices (mobile phone)
1) To put ABT
-
C100 into pairing mode
Move the switch to the right to turn on your ABT-C100. Blue LED
blinks 2 times, one long and one short, with four increasing beep tones.
And then ABT-C100 automatically searches the last connected device
while RED LED blinking. If the last connected device is found, ABT-
C100 automatically tries to connect the device and high beep tone is
1)
To
put
ABT
-
C100
into
pairing
mode
.
Long press of or button puts the corresponding user
area into the pairing mode except when ABT-C100 is in searching for
connection for the last connected device or in pairing mode. In pairing
mode, Red and Blue LED blinks alternately. After 3 minutes without
Heard after connected. If ABT-C100 fails to find the last connected
device, it sounds low beep tone and goes into the idle state. The first
beep is for telephone device (HFP) and the second beep is for audio
device(A2DP).
30 minutes of unconnected states triggers automatic power-off feature.
Ithi t lidth
it h t ff iti d lid
mode,
Red
and
Blue
LED
blinks
alternately.
After
3
minutes
without
connection trial from other device, it returns to the idle state.
<Note>
If you want to connect a new device not connected before to your
ABT-C100, you need to pair the device with your ABT-C100 before
I
n
thi
s case,
y
ou mus
t
s
lid
e
th
e sw
it
c
h
t
o o
ff
p
os
iti
on an
d
s
lid
e
to on position again to power up.
Turning off
connection. Pairing creates a unique and encrypted link between two
Bluetooth devices and lets them communicate with each other.
<Note>
To provide easy and simple mean to connect for up to two users,
Move the switch to the left to turn off your ABT-C100. ABT-C100 applies two buttons, and . Two devices
can be registered (pair and connect), one device on each button, so
that the connection of one user can be easily switched to the other, by
hitting the appropriate user button. Each user button holds the ID for
the very last connected device.
켜고 끄는 그림(pwr버튼을 확대해서)
첫째와 셋째 손가락으로 양가를 잡고 둘째 손가락으로 버튼
을 옮기는 모습
<Note>
ABT-C100 returns to the standby mode after 3 minutes waiting for
connection. RED LED blinks once every 2 seconds in standby mode.
![](/img.php?id=1006470&img=bg7.png)
11
10
2) Discover ABT-C100 from your mobile phone or equivalent Bluetooth
gateway devices
<Note>
The Blue LED blinking once every 2 second and two high beep tones
reveals the connection is established. This re
p
eats twice, one for
Navigate the Bluetooth menu on your Bluetooth gateway such as mobile
phone, search and register the ABT-C100 to the gateway. Refer to
the user’s guide of the gateway.
<Note>
p
telephone connection (HFP) and the other for audio connection(A2DP).
After then, the Blue LED blinks every 3 seconds.
<Note>
Search need to be done for stereo headset to use both telephone call
and audio player.
3) Connect the ABT-C100 among the searched devices.
Yl h h bilhhhlif
The Bluetooth icon a
pp
ears on the dis
p
la
y
of the
g
atewa
y
, mobile
p
hone,
or other Bluetooth devices. If you carefully see the icon, it differs
when only a telephone device, audio device, or both are connected.
<Note>
Y
our B
l
uetoot
h
g
atewa
y
suc
h
as mo
bil
e
ph
one s
h
ows t
h
e
li
st o
f
available Bluetooth devices. Choose ABT-C100 and select “CONNECT”
menu. If your are asked to enter PIN code or pass code, press
“0000”(four zeros) and confirm key.
<Note>
<Note>
8 seconds of key pressing for or clears the registry.
Three blinks of Blue LED and one successive blink of Red LED shows
the clearing activity is succeed. Two low beep tones are also provided.
Disregard the blinking of Red and Blue LED alternately with two beep
<Note>
PIN code or pass code is 16 alphanumeric digits, but usually use only 4
decimal digits and ABT-C100 uses four zeros.
Disregard
the
blinking
of
Red
and
Blue
LED
alternately
with
two
beep
tones during the button press.
<Note>
When
y
ou turn ABT-C100 on, it automaticall
y
searches the last
y
y
connected device and automatically connects if available.
![](/img.php?id=1006470&img=bg8.png)
13
12
(4) Connecting to the registered device
When your ABT
C100 is registered but not connected you can connect
Multi Pairing
Each user, or may have two different kinds of
Bluetooth devices For example a mobile phone and MP3 player on
When
your
ABT
-
C100
is
registered
but
not
connected
,
you
can
connect
either from the gateway device or by pressing or .
<Note>
Bluetooth
devices
.
For
example
,
a
mobile
phone
and
MP3
player
on
each user.
멀티로 연결된 그림
If or has a registry for the last connected device, simple
hitting of the corresponding button connects the Bluetooth link.
<Note> Mp3
Mp3
Headset icon in your Bluetooth gateway device, such as mobile phone,
shows the Bluetooth connection state.
핸드폰 User1 핸드폰 User2
If you disconnected the Bluetooth link and want to connect to the same
device, wait till the icon shows link disconnected. Otherwise, the
connection may fail because both the gateway and ABT-C100 page
simultaneously. Sometimes in this situation, only part of the link may be
established, only telephone link (HFP) or audio link (A2DP), not both.
(5) Connecting ABT-C100 to your
computer
Temporarily break of the link and reestablishment put the device to the
same situation. Just press User1 or User2 button to correct the link.
If this doesn't work, you need to pair and connect again from the start.
computer
Being used with a Bluetooth USB audio dongle or a Bluetooth audio
dongle, ABT-C100 can be used as AV accessory on the PC, that is
wireless microphone and speaker on your computer. You can make a
VoIP call or listen to the music or movie. Make sure the proper Bluetooth
connection is established
![](/img.php?id=1006470&img=bg9.png)
15
14
3. Using your ABT-C100
(1) Calling
<Note>
All talking functions below need hands-free connection or stereo headset
with hands-free connection. Make sure the proper Bluetooth connection
is established.
<Note>
Call rejection works if the mobile phone supports call rejection feature.
Some mobile phone has the routing options for the call rejection, for
example, provision of error tone or routing to personal voice mail.
<Note>
An echo sound may take place when the voice feedback level is extremely
high and far above the level the integrated Acoustic Echo Canceller can
handle.
4) Making a call
- Dial new number
Enter phone number into your mobile phone and just press of
your ABT-C100. To stop the progressing call, press again.
- Standby status
Your ABT-C100 rings when a call is coming in. Press to
answer the call.
-Music play status
-Last number redial
Press of of ABT-C100 shows the list of several last dialed
phone numbers on the display of the mobile phone with the very last
number is selected. Scroll and choose the number you want to call, and
then, press again, which route the call. To stop the
Music is temporarily paused and your ABT-C100 rings when a call
is coming in. Press to answer a call. After you end a call,
music continues to play automatically.
)
p
ro
g
ressin
g
call,
p
ress a
g
ain.
<Note>
Depending on your phone setting, the first press of
immediately starts call routing with the very last dialed number without
displaying
2
)
Endin
g
a call
Press to end an active call during a call. The call ends up
with one high beep tone.
3) Rejecting a call
displaying
.
-Voice dialing
At standby state, long press of leads your phone move into
voice dialing mode if it features.
3)
Rejecting
a
call
When your ABT-C100 rings, long press of rejects the call.
The call ends up with one high beep tone.
<Note>
Some mobile phones support the voice dialing feature and some don’t.
Please make sure if your phone provides this feature before using.
![](/img.php?id=1006470&img=bga.png)
17
16
5) Adjusting a volume
Press the +button and -button to adjust the volume.
(2) Audio Listening (music listening)
All music listening functions below need stereo headset connection or
stereo headset with hands-free connection. Make sure the
p
ro
p
er
6) Muting the Microphone and release
Long press of -button mutes the microphone with two beep tone. The
remote party cannot hear what you are talking. To end the mute function,
Press long
-
button again It toggles
pp
Bluetooth connection is established.
If your ABT-C100 is connected with a gateway device, such as mobile
phone and MP3 player, you can listen the music and remote control the
Press
long
button
again
.
It
toggles
.
7) Transferring a call
During an active call, long press of button transfer the call
from
y
our ABT-C100 to the connected mobile
p
hone. Another lon
g
device by ABT-C100.
Function How to use button
Play/ Pause
Press
button
y
pg
press of button transfers reversely, from the connected
mobile phone to your ABT-C100. It toggles.
8) Call waiting
Play/
Pause
Press
button
Stop Long button
Rewind / Forward Press / button
Press to put an active call on hold and answer a waiting
or incoming call. Another press put an active call on hold
and answer a waiting or incoming call. All calls, active or waiting, are
disconnected after hooked off.
Fast rewind/ Fast forward Long / button
Volume Press +(volume up) / -(volume
down button
<Note>
Some mobile phones or mobile service providers support the call waiting
or three way call feature and some don’t. Please make sure if your
phone or mobile service provider support this feature before using.
For more detailed information please refer to your mobile phone manual
<Note>
To use remote control, the connected device must support Bluetooth
audio and video remote control profile (AVRCP).
For
more
detailed
information
,
please
refer
to
your
mobile
phone
manual
and contact to your mobile service provider .
![](/img.php?id=1006470&img=bgb.png)
19
18
<Note>
Strong radio power from radio broadcasting stations may interfere the
music listening and communication through internal FM transmitter.
Try to
(3) Speaker or FM transmitter
RX voice of a call and audio sound of stereo music play can be heard
either integrated stereo speakers or FM radio receiver The default is
music
listening
and
communication
through
internal
FM
transmitter.
Try
to
use another channel or make the set to face the antenna directly. Every
four channel suffers from same situation, use internal speaker.
<Note>
Power cycle always returns ABT-C100 audio path to the default,
either
integrated
stereo
speakers
or
FM
radio
receiver
.
The
default
is
using integrated stereo speakers.
If you press button once, the audio output is switched to the first
channel of FM transmitter, 88.3MHz, with one beep.
through the integrated stereo speakers .
<Note>
Please make sure the channel of car radio receiver also need to be
changed to be the same frequency of ABT-C100
channel
of
FM
transmitter,
88.3MHz,
with
one
beep.
If you press button again, the channel moves to 88.5MHz with two
beeps.
If you press button again, the channel moves to 88.7MHz with
three beeps.
If you press button again, the channel moves to 88.9MHz with four
<Note>
FM radio usually allows better communication performance and sound
quality.
<N t >
beeps.
If you press button again, it returns to the default, internal speakers,
with low beep tone. The sequence repeats on every press of button.
Long press of FM button at any state make return to the default, internal
speaker, with low beep tone .
<N
o
t
e
>
Change of FM channel during a call make beep tone distorted with
howling sound by audio feedback because both microphone and
speaker are operating..
<Note>
You have to allow 4 seconds between button press.
Channel
How to use button
Sound
Frequency
<Note>
You have to allow 4 seconds between button press.
Channel
How
to
use
button
Sound
Frequency
Ch1 Press button 1 high beep tone 88.3Mhz
Ch2 Press at ch1 2 high beep tones 88.5Mhz
Ch3 Press at ch2 3 high beep tones 88.7Mhz
Ch4 Press at ch3 4 high beep tones 88.9Mhz
Speakers Press at ch4 1 low beep tone Speakers
![](/img.php?id=1006470&img=bgc.png)
(5) Controlling ABT
-
C100
2120
(5)
Controlling
ABT
C100
Function Button Previous State Duration of press Tone LED
Connection
T
Pff
M t th i ht( )
4i i b t
LdhtBlLED
T
urn on
P
ower o
ff
M
ove
t
o
th
e r
i
g
ht(
→
)
4
i
ncreas
i
ng
b
eep
t
ones
L
ong an
d
s
h
or
t
Bl
ue
LED
Turn off Operating Move to the left(←) None None
Connecting
/Reconnecting
Disconnected None Two consecutive combination tones, one
for HFP, the other for A2DP
- Connected: high beep tone
Connection failed: low beep tone
Red LED
Disconnected
Connected
Press
-
Connection
failed:
low
beep
tone
Connected
Pairing
Any state except
pairing and
connecting
Long press 2 low beep tones Red LED and Blue LED
Initialize
Any state except
p
airin
g
and Press and hold 8
seconds
2 low bee
p
tones Three blue and one Red LED
(RED/BLUE f 1 d)
pg
connecting
seconds
p
(RED/BLUE
f
rom
1
sec passe
d)
Switch the
user
Any state except
pairing and
connecting Press
Two consecutive combination tones, one
for HFP, the other for A2DP
- Connected: high beep tone
- Connection failed: low beep tone
Red LED for connecting
Blue LED for connected
Audio (Music)
Play Stop/Pause Press None Blue LED
Pause Play Press None Blue LED
Stop Playing/Pause Long Press None Blue LED
-
30 minutes of unconnected state triggers automatic power
-
off
Rewind/
Forward Playing/Pause Press None Blue LED
Fast rewind /
Fast forward Playing Press and hold None Blue LED
30
minutes
of
unconnected
state
triggers
automatic
power
off
feature. Slide the power switch off and on to power up
![](/img.php?id=1006470&img=bgd.png)
(5) Controlling ABT
-
C100
2322
(5)
Controlling
ABT
C100
Function Button Previous State Duration of press Tone LED
Talk
Listing the last
numbers dialed
Standb
y
Press None Blue LED
numbers
dialed
y
Call No. entered
No. selected
Press None (Progressing tones from telephone
network) Blue LED
Receive Ringing Press None Blue LED
End a call
During a call
Press
1 high beep tone
Blue LED
End
a
call
During
a
call
Press
1
high
beep
tone
Blue
LED
Reject a call Ringing Long press 1 high Beep tone Blue LED
Mute / Unmute -During a call Long press 2 Beep tones Blue LED
Voice dial Standby Long press 1 high beep tone Blue LED
Clth
Vi dili
C
ance
l
th
e
Voice dial
V
o
i
ce
di
a
li
ng
state Press None Blue LED
Call waiting During a call Long press None Blue LED
Transfer device During a call Long press None Blue LED
FM transmitter
Audio RX-FM1 Internal Speaker Press 1 high beep tone Blue LED
Audio RX-FM2 FM1 channel Press 2 high beep tones Blue LED
Audio RX-FM3 FM2 channel Press 3 high beep tones Blue LED
Audio RX
-
FM4
FM3 channel
Press
4 high beep tones
Blue LED
Audio
RX
FM4
FM3
channel
Press
4
high
beep
tones
Blue
LED
Internal
speakers FM4 channel Press 1 low beep tone Blue LED
internal
speakers Any FM channel Long Press 1 low beep tone Blue LED
C
C
ommon
Volume Up /
Down +/-During a call
Playing Press None Blue LED
![](/img.php?id=1006470&img=bge.png)
(6) State of ABT
-
C100
2524
(6)
State
of
ABT
C100
Function Button Description Tone LED
Connection
Turn on Power up 4 increasing beep tones Long and short Blue LED
Tff
Pd
N
N
T
urn o
ff
P
ower
d
own
N
one
N
one
Power On Auto
Connecting None Automatic connection to the last
connected device None Fast Red LED
Connecting or Connecting to paired device Fast Red LED
Connected None Bluetooth link connected state Blue LED every 3 Sec.
Unconnected None Bluetooth link unconnected state Red LED every 2 Sec.
Connection succeeded None Succeeded to connect the device Two consecutive high beep tones
Connection Failed None Failed to connect the device Two consecutive low beep tones
Pairing or Two devices share their information 2 low beep tones Red LED and Blue LED
Initialize or
Clears the registered device
information
Needs only for production line
2 low beep tones Three blue and one Red LED
(RED/BLUE from 1 sec passed)
Switch the user
or
Change the user from User1 to
Two consecutive combination tones, one
for HFP, the other for A2DP Red LED for connecting
Switch
the
user
or
User2 or vice versa - Connected: high beep tone
- Connection failed: low beep tone
Blue LED for connected
Automatic Power Off None Unconnected for 30 minute triggers
power off.
Audio (Music)
Play / Pause None Blue LED
Stop None Blue LED
Rewind/ Forward / None Blue LED
Fast
rewind
/
Fast
/
N
Bl LED
Fast rewind / Fast
forward
/
N
one
Bl
ue
LED
Common
Volume Up / Down +/-None Blue LED
![](/img.php?id=1006470&img=bgf.png)
(6) State of ABT
-
C100
2725
(6)
State
of
ABT
C100
Function Button Description Tone LED
Talk
Listing the last
numbers dialed
None Blue LED
numbers
dialed
Call None (Progressing tones from telephone
network) Blue LED
Receive None Blue LED
End a call
Ends a call during connecting and
1 high beep tone
Blue LED
End
a
call
connected.
1
high
beep
tone
Blue
LED
Reject a call Rejects incoming call 1 high Beep tone Blue LED
Mute / Unmute -2 Beep tones (high +low) Blue LED
Voice dial
1 high beep tone (Sometimes hard to
hbbi idihi )
Blue LED
Voice
dial
h
ear
b
y
b
e
i
ng m
i
xe
d
w
i
t
h
vo
i
ce prompt
)
Blue
LED
Cancel the
Voice dial None Blue LED
Call waiting Puts on hold the current call and receives
the incoming call or the call held before
None Blue LED
the
incoming
call
or
the
call
held
before
Transfer device Trans the call from ABT-C100 to the
phone and vice verse on each press None Blue LED
FM transmitter
Audio RX-FM1 Set audio RX path to 88.3MHz of FM radio 1 high beep tone Blue LED
Audio RX-FM2 Set audio RX path to 88.5MHz of FM radio 2 high beep tones Blue LED
Audio RX-FM3 Set audio RX path to 88.7MHz of FM radio 3 high beep tones Blue LED
Audio RX-FM4 Set audio RX path to 88.9MHz of FM radio 4 high beep tones Blue LED
Internal
k
Set audio RX path to internal stereo
k
1 low beep tone
Blue LED
spea
k
ers spea
k
ers
1
low
beep
tone
Blue
LED
Internal
speakers
Long press of FM button returns the
Audio RX path to the internal stereo
speakers at any state
1 low beep tone Blue LED
![](/img.php?id=1006470&img=bg10.png)
4A
2928
5) ABT-C100 does not operate well with the Bluetooth gateway device
- Though ABT-C100 and your gateway device comply with Bluetooth
specification (1.2, 2.0,or 2.1) there can be compatibility problem
because of differences in realization. Please check to the sales
4
.
A
nnex
(1) Troubleshooting & FAQ
1) Cannot turn my ABT-C100 on
because
of
differences
in
realization.
Please
check
to
the
sales
representative.
6) Redial and voice dial
- These features operate when your paired device supports them.
Please check the phone’s manual for further details.
- ABT-C100 battery may be overdrawn. Try recharging the unit.
2) Crackling noise is heard
- Bluetooth devices are short range RF communication product and
th di t b t th i d d i t t d 10 t
7) ABT-C100 does not respond to any button press
- Needs power cycle.
8) Battery operating time is short compared to the ABT-C100 user guide
th
e
di
s
t
ance
b
e
t
ween
th
e
p
a
i
re
d
d
ev
i
ces mus
t
no
t
excee
d
10
me
t
ers.
-Bluetooth device is RF product and is so sensitive to an obstacle
between your ABT-C100 and the paired device.
- Some electrical devices such as microwave oven generate a radio
frequency noise to interfere your ABT-C100 to communicate with
the Bluetooth device
- Naturall
y
, the batter
y
ca
p
acit
y
decreases with time
p
assed.
- Locating the battery in the place outside the temperature range of 0 to
40 degree Celsius dramatically decreases the battery capacity.
- Warranty period of battery is six months.
- Please visit a service center to replace the battery.
the
Bluetooth
device
.
- For best audio quality, put the paired device in line of sight from
your ABT-C100.
3
)
Cannot hear an
y
thin
g
(2) Description on some terminology
1) Bluetooth is a radio technology that connects devices, such as mobile
phones and headsets, without wires or cords over a short distance
)
yg
- Make sure the Bluetooth gateway device is connected to your
ABT-C100.
- Increase the volume on the ABT-C100.
(approx.10meters).
- Because of electronic interference with other devices, abnormal
operations or noise may occur.
Electronic interference can occur because Bluetooth uses a
4) Difficult to pair and connect even though the Bluetooth gateway device
is working
- ABT-C100 registry might be deleted from your gateway device,
such as mobile phone. Follow the steps for pairing and connection.
- The connection process might be stuck. Do the connection process
fre
q
uenc
y
ran
g
e which is used b
y
Industrial, scientific, medical
devices, a microwave oven, or a wireless LAN. Bluetooth devices
must be apart from these devices.
after
p
ower c
y
cle.
![](/img.php?id=1006470&img=bg11.png)
3130
3) Advanced Audio Distribution Profile (A2DP) is Bluetooth profile which
can deliver stereo sound. To enjoy stereo music, both Bluetooth
devices connected together support A2DP.
- Depending on environments where Bluetooth devices are used,
abnormal operations or noise may occur.
If your body interfere signal transmission, abnormal operations or
noise may occur. If part of your body like hands contacts around radio
4) Audio/Video Remote Control Profile (AVRCP) is Bluetooth profile that a
device can remote control the connected device. To use AVRCP, both
Bluetooth devices connected together support AVRCP.
circuit area sending or receiving electronic waves, abnormal
operations or noise may occur.
Because radio wave strength is changed by an obstacle, such as
wall, partition, or others, noise may occur depending on your
position.
5) Pairing creates a unique and encrypted link between two Bluetooth
devices and lets them communicate with each other.
- During a call, a noise may take place if the unit and the gateway device,
such as mobile phone, are not located close enough to radio
communicate.
If this condition continues, the Bluetooth connection between
ABT
-
C100 and the gateway device may be disconnected
6) Pairin
g
mode is the state in which the Bluetooth
g
atewa
y
device can
pair. After paired, it can be connected.
7) Connected mode is the condition that a two Bluetooth devices are
li k d t th l i ll I thi t t th di b li t d d ll
ABT
C100
and
the
gateway
device
may
be
disconnected
.
- Functions of each Bluetooth device can be different according to
realization of their company.
To
g
et more information: www.bluetooth.com.
li
n
k
e
d
t
o
g
e
th
er
l
o
gi
ca
lly
.
I
n
thi
s s
t
a
t
e,
th
e au
di
o can
b
e
li
s
t
ene
d
an
d
ca
ll
can be made
8) Standby mode is when a Bluetooth device is idle waiting for a
call or audio play The Blue connection is made
g
2) Bluetooth profiles are predefined functions by Bluetooth SIG for many
kinds of device dependant protocols. Bluetooth gateway, such as
mobile phone, supports either the headset profile, the hands-free profile,
call
or
audio
play
.
The
Blue
connection
is
made
.
9) If you do not connect a Bluetooth device for 30 minutes after power
up, the unit goes powered off.
or both. To implement a profile, all mandatory features must be
supported.
- Headset profile: mono headset profile
- Hands-free profile : the profile proper to make a call through the
connected mobile
p
hone
- Advanced Audio Distribution Profile / Audio Video Remote Control
Profile(A2DP/AVRCP) : specification which can play stereo
![](/img.php?id=1006470&img=bg12.png)
3332
(4) FCC Statement
This device complies with part15 of the FCC Rules. Operation
is subject to the following conditions: (1) This device may not cause
()
(3) Safety and general information
1) Safety guidelines
- Do not use ABT-C100 in a danger of ignition of flammable gases.
-To avoid any damage or malfunction, do not drop the unit from high
places.
harmful interference, and
(
2
)
this device must acce
p
t an
y
interference
received, including interference that may cause undesired operation.
Changes or modification net expressly approved by the party
responsible for Compliance could void the user’s authority to operate
the equipment. Connecting of peripherals requires the use of grounded
shielded signal cables
places.
- Do not modify, repair and disassemble the unit at discretion.
- Keep away the unit from humidity, water, and any other liquid. If the
unit is exposed to water, moisture, and other liquid, power off
immediately and dry it. Contact to the sales representative.
- Do not use chemical products to clean the unit.
shielded
signal
cables
.
RF exposure statements
This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment This equipment should be
- Use only +5V supply to charge. Accompanied charging cable is
recommended, but any standard USB cable can be used. The
charging connector is mini-USB type B.
- Place the unit between 10 to 40 degree Celsius when not using for
a long period of time.
forth
for
an
uncontrolled
environment
.
This
equipment
should
be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body. This transmitter must not be co-
located or operated in conjunction with any other antenna or transmitter.
<Note>
- Avoid from using the unit around medical devices.
- Please check if the local laws restrict the use of mobile phones while
driving. It is the owner’s responsibility to use this product in
compliance with the local laws.
- Do not use the unit at high volume for very long. With continued use at
hi h
l
b
td
t
th
d
ll
The manufacturer is not responsible for any interference caused by
unauthorized modifications to this equipment. Such modifications could
void the user’s authority to operate the equipment.
high
vo
l
ume,
y
our ears ma
y
b
ecome accus
t
ome
d
t
o
th
esoun
d
l
eve
l
,
which may result in permanent damage to your hearing without any
noticeable discomfort.
- Replacement or service must be done at a qualified service center or
returned to the manufacturer.
-
This wireless device can not be used to services related to life safety
(5) European Union Notice
Products with CE marking comply with the R&TTE Directive(99/5/EC),
the EMC Directive (89/336/EEC) and the Low Voltage Directive
(73/23/EEC) issued by the Commission of the European Community.
This
wireless
device
can
not
be
used
to
services
related
to
life
safety
because it is vulnerable to radio interference.
2) Exemption Clause
- Manufacture company, sale company and commercial agent are not
res
p
onsible for accidental in
j
ur
y
and dama
g
ecausedb
y
consumer’s
(73/23/EEC)
issued
by
the
Commission
of
the
European
Community.
p
jy
g
y
fault.
- This user guide is made with present specifications.
-Specifications and direction for use change without advance notice to
improve ABT-C100.
![](/img.php?id=1006470&img=bg13.png)
3534
Household users should contact either the retailer where they purchased
this product or their local government office, for details of where and
how they can take this item for environmentally safe recycling.
(6) Safety
1)Caution
Danger of explosion if battery is incorrectly replaced.
Re
p
lace onl
y
with same or e
q
uivalent t
yp
e.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
(8) Warranty
py q yp
2)Batteries shall not be exposed to excessive head such as sunshine,
fire or the like.
Please note that this product uses radio frequency bands not
(8)
Warranty
The condition of the warranty and our accompanying responsibilities are
as follows. Supplier’s warranty is non-transferable and this warranty is
limited to the original purchaser only.
harmonized within EU. Within the EU this product is intended to be used
in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland,
Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United
Kingdom and within EFTA in iceland, Norway and Switzerland. Bluetooth
is a trade mark owned by the Bluetooth SIG, Inc
- You must be able to prove the date of purchase for the new product
with a dated receipts.
- The warranty is not applicable if the product has been subject to
physical abuse, improper installation , modification or repair by
unauthorized personnel.
(7) WEEE symbol information
Correct Disposal of This Product
- The responsibility of supplier’s products shall be limited to the repair
or replacement of the product at it’s sole discretion.
- Specifically, limited-life consumable components which are subject to
normal wear and tear, such as battery, are exempted from any
warranty.
Correct
Disposal
of
This
Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with
se
p
arate collection s
y
stems.)
- A supplier will not take any responsibility if the failure of the unit is
resulted from accident, abuse, misuse, or any unauthorized repair,
modification, or disassemble.
- Modification and repair of the unit should be done by authorized and
qualified service personnel, authorized service center, or manufacturer.
py
This marking shown on the product or its literature, indicates that it
should not be disposed with other household wastes at the end of its
working life.
Important note : To comply with RF exposure requirements, this device
may not be co-located with any other transmitter or antenna.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of
material resources.
![](/img.php?id=1006470&img=bg14.png)
3736