Seoultek Valley ABT-C100 Bluetooth carkit User Manual

Seoultek Valley Co., Ltd Bluetooth carkit

User manual

SEOULTEK VALLEYBluetooth HandsfreeCarkit(ABT-C100)User Guide
Special Features01Contents1. About your ABT-C100 2. Getting startedSpecial Features1. Easy connection for two drivers Two keys for connection One for main2. Getting started(1) Charging ABT-C100(2) Turning ABT-C100 on and off(3) Pairing and Connecting ABT-C100 with gateway devices (mobile phone)Two keys for connection. One for main driver, the other for second driver.2 Sound option(4) Connecting to the registered device(5) Connecting ABT-C100 to yourcomputer3. Using your ABT-C100()2. Sound optionOption to use car radio system for telephone call and stereo music listening.(1) Calling(2) Audio Listening(3) Speaker or FM transmitter(5) Controlling ABT-C100(6) State of ABT-C1003. Wireless stereo music playerSimple wireless stereo speaker for (6) State of ABT-C1004. Annex(1) Troubleshooting & FAQ(2) Description on some terminology(3) Safety and general informationppcomputer and mobile phone to listen to stereo music and phone call.(3) Safety and general information(4) FCC Statement(5) European Union Notice(6) Safety(7) WEEE symbol information4. Acoustic echo cancellation and noise reduction algorithm applied(8) Warranty
03021. About your ABT-C100 (1) Components (2) IllustrationPl /PUser2User1 FM TalkPlay/PausePower on/off<ABTC100> <Ch i C bl >-+ RWD FWDIntegrated Speaker_LftIntegrated Speaker_Ri htRed LEDBlue LED<ABT-C100> <Charging Cable>*Bluetooth gateway devices: Bluetooth devices playing a gateway role such as mobile phone,MP2 player, and audio dongle, etc.LeftRight(3) How to use buttonsThe buttons on your ABT-C100 perform the different functionsdepending on how long you press them.<User’s Guide> <Sun visor Clip> Instruction Duration of pressLong Press Approx. : 1 second(Short) Press Approx. : 0.5 second
0504(4) Install< Sun visor In a car> <On the table>김치낸장고에붙여 사용하는모습회의하면서스피커폰으로사용하는모습< Metal Frame of Computer> <In a kitchen>< In a conference room >모습사용하는모습
07062. Getting started(1) Charging ABT-C100Connect the USB side of the charging cable to the USB port of your computer and the mini-USB side of the cable to your ABT-C100.The Red LED will be turned on when charging and turned off when fullycharged. It takes approximately 3 hours to fully charge the unit.<Battery Charging>Charging timeOperating timeTalk time Standby time Play timeAbout 3 hours About 18 hours About 500 About 12 hoursABT-C100 can be charged with any standard USB to Mini-USB cable from +5V USB port of your computer. Furthermore, any user provided hbdifthlttiidbt+45VtChecking the battery chargeRemaining charge approximation is provided in ABT-C100. To check theremaining battery charge, press and hold the ＋(volume up) buttonhourscharger may be used if the voltage rating resides between +4.5V to+5.5V. If more than +7V is provided, the integrated over-voltage circuit starts to operate and the circuit cuts out the power to prevent theAnd －(volume down) button simultaneously until the LED flickers. The meaning of the LED flickering is as followsstarts to operate and the circuit cuts out the power to prevent theinternal charging circuit from damaged. After return to rated voltageranges, the charge circuit starts to charge again. The type of the charging connector of ABT-C100 is mini-USB Type-B.Remaining amount LED statusAbout 80 ~100% Red LED and Blue LED blink 3 times simultaneously.About 20 ~ 80% Blue LED blinks 3 times.yp g gypAbout 5 ~ 20% Red LED blinks 3 times.
0908(2) Turning ABT-C100 on and offTurning on(3) Pairing and Connecting ABT-C100 with gateway devices (mobile phone)1) To put ABT-C100 into pairing modeMove the switch to the right to turn on your ABT-C100. Blue LED blinks 2 times, one long and one short, with four increasing beep tones. And then ABT-C100 automatically searches the last connected device while RED LED blinking. If the last connected device is found, ABT-C100 automatically tries to connect the device and high beep tone is 1) To put ABT-C100 into pairing mode.Long press of or button puts the corresponding user area into the pairing mode except when ABT-C100 is in searching forconnection for the last connected device or in pairing mode. In pairingmode, Red and Blue LED blinks alternately. After 3 minutes withoutHeard after connected. If ABT-C100 fails to find the last connected device, it sounds low beep tone and goes into the idle state. The first beep is for telephone device (HFP) and the second beep is for audio device(A2DP).30 minutes of unconnected states triggers automatic power-off feature.Ithi t lidthit h t ff iti d lidmode, Red and Blue LED blinks alternately. After 3 minutes withoutconnection trial from other device, it returns to the idle state. <Note>If you want to connect a new device not connected before to your ABT-C100, you need to pair the device with your ABT-C100 beforeIn this case, you must slide the switch to off position and slide to on position again to power up. Turning offconnection. Pairing creates a unique and encrypted link between twoBluetooth devices and lets them communicate with each other.<Note>To provide easy and simple mean to connect for up to two users,Move the switch to the left to turn off your ABT-C100. ABT-C100 applies two buttons, and . Two devices can be registered (pair and connect), one device on each button, sothat the connection of one user can be easily switched to the other, byhitting the appropriate user button. Each user button holds the ID forthe very last connected device. 켜고 끄는 그림(pwr버튼을 확대해서)첫째와 셋째 손가락으로 양가를 잡고 둘째 손가락으로 버튼을 옮기는 모습<Note>ABT-C100 returns to the standby mode after 3 minutes waiting for connection. RED LED blinks once every 2 seconds in standby mode.
11102) Discover ABT-C100 from your mobile phone or equivalent Bluetooth gateway devices<Note>The Blue LED blinking once every 2 second and two high beep tonesreveals the connection is established. This repeats twice, one forNavigate the Bluetooth menu on your Bluetooth gateway such as mobilephone, search and register the ABT-C100 to the gateway. Refer to the user’s guide of the gateway.<Note>ptelephone connection (HFP) and the other for audio connection(A2DP).After then, the Blue LED blinks every 3 seconds. <Note> Search need to be done for stereo headset to use both telephone calland audio player. 3) Connect the ABT-C100 among the searched devices.Yl h h bilhhhlifThe Bluetooth icon appears on the display of the gateway, mobile phone,or other Bluetooth devices. If you carefully see the icon, it differs when only a telephone device, audio device, or both are connected. <Note>Your Bluetooth gateway such as mobile phone shows the list of available Bluetooth devices. Choose ABT-C100 and select “CONNECT”menu. If your are asked to enter PIN code or pass code, press“0000”(four zeros) and confirm key.<Note><Note>8 seconds of key pressing for or clears the registry.Three blinks of Blue LED and one successive blink of Red LED showsthe clearing activity is succeed. Two low beep tones are also provided. Disregard the blinking of Red and Blue LED alternately with two beep<Note> PIN code or pass code is 16 alphanumeric digits, but usually use only 4decimal digits and ABT-C100 uses four zeros. Disregard the blinking of Red and Blue LED alternately with two beeptones during the button press. <Note>When you turn ABT-C100 on, it automatically searches the lastyyconnected device and automatically connects if available.
1312(4) Connecting to the registered deviceWhen your ABTC100 is registered but not connected you can connectMulti PairingEach user, or may have two different kinds of Bluetooth devices For example a mobile phone and MP3 player onWhen your ABT-C100 is registered but not connected, you can connect either from the gateway device or by pressing or .<Note>Bluetooth devices. For example, a mobile phone and MP3 player oneach user.멀티로 연결된 그림If or has a registry for the last connected device, simple hitting of the corresponding button connects the Bluetooth link.<Note> Mp3Mp3Headset icon in your Bluetooth gateway device, such as mobile phone,shows the Bluetooth connection state.핸드폰 User1 핸드폰 User2If you disconnected the Bluetooth link and want to connect to the samedevice, wait till the icon shows link disconnected. Otherwise, the connection may fail because both the gateway and ABT-C100 pagesimultaneously. Sometimes in this situation, only part of the link may be established, only telephone link (HFP) or audio link (A2DP), not both. (5) Connecting ABT-C100 to your computerTemporarily break of the link and reestablishment put the device to the same situation. Just press User1 or User2 button to correct the link. If this doesn't work, you need to pair and connect again from the start.computerBeing used with a Bluetooth USB audio dongle or a Bluetooth audio dongle, ABT-C100 can be used as AV accessory on the PC, that is wireless microphone and speaker on your computer. You can make aVoIP call or listen to the music or movie. Make sure the proper Bluetoothconnection is established
15143. Using your ABT-C100(1) Calling<Note>All talking functions below need hands-free connection or stereo headsetwith hands-free connection. Make sure the proper Bluetooth connection is established.<Note>Call rejection works if the mobile phone supports call rejection feature.Some mobile phone has the routing options for the call rejection, forexample, provision of error tone or routing to personal voice mail.<Note>An echo sound may take place when the voice feedback level is extremely high and far above the level the integrated Acoustic Echo Canceller canhandle.4) Making a call - Dial new numberEnter phone number into your mobile phone and just press ofyour ABT-C100. To stop the progressing call, press again.- Standby statusYour ABT-C100 rings when a call is coming in. Press to answer the call.-Music play status-Last number redialPress of of ABT-C100 shows the list of several last dialed phone numbers on the display of the mobile phone with the very lastnumber is selected. Scroll and choose the number you want to call, andthen, press again, which route the call. To stop the Music is temporarily paused and your ABT-C100 rings when a call is coming in. Press to answer a call. After you end a call, music continues to play automatically.)progressing call, press again.<Note>Depending on your phone setting, the first press of immediately starts call routing with the very last dialed number without displaying2) Ending a callPress to end an active call during a call. The call ends up with one high beep tone.3) Rejecting a calldisplaying.-Voice dialingAt standby state, long press of leads your phone move intovoice dialing mode if it features.3) Rejecting a callWhen your ABT-C100 rings, long press of rejects the call. The call ends up with one high beep tone. <Note>Some mobile phones support the voice dialing feature and some don’t. Please make sure if your phone provides this feature before using.
17165) Adjusting a volumePress the ＋button and －button to adjust the volume.(2) Audio Listening (music listening)All music listening functions below need stereo headset connection orstereo headset with hands-free connection. Make sure the proper6) Muting the Microphone and releaseLong press of －button mutes the microphone with two beep tone. The remote party cannot hear what you are talking. To end the mute function,Press long－button again It togglesppBluetooth connection is established.If your ABT-C100 is connected with a gateway device, such as mobilephone and MP3 player, you can listen the music and remote control the Press long button again. It toggles.7) Transferring a callDuring an active call, long press of button transfer the callfrom your ABT-C100 to the connected mobile phone. Another longdevice by ABT-C100.Function How to use button Play/ PausePressbuttonypgpress of button transfers reversely, from the connected mobile phone to your ABT-C100. It toggles.8) Call waitingPlay/ Pause Press buttonStop Long buttonRewind / Forward Press / buttonPress to put an active call on hold and answer a waiting or incoming call. Another press put an active call on holdand answer a waiting or incoming call. All calls, active or waiting, aredisconnected after hooked off. Fast rewind/ Fast forward Long / buttonVolume Press ＋(volume up) / －(volume down button<Note>Some mobile phones or mobile service providers support the call waitingor three way call feature and some don’t. Please make sure if yourphone or mobile service provider support this feature before using.For more detailed information please refer to your mobile phone manual<Note>To use remote control, the connected device must support Bluetoothaudio and video remote control profile (AVRCP).For more detailed information, please refer to your mobile phone manualand contact to your mobile service provider .
1918<Note>Strong radio power from radio broadcasting stations may interfere the music listening and communication through internal FM transmitter.Try to(3) Speaker or FM transmitter RX voice of a call and audio sound of stereo music play can be heard either integrated stereo speakers or FM radio receiver The default ismusic listening and communication through internal FM transmitter.Try touse another channel or make the set to face the antenna directly. Everyfour channel suffers from same situation, use internal speaker.<Note>Power cycle always returns ABT-C100 audio path to the default,either integrated stereo speakers or FM radio receiver. The default isusing integrated stereo speakers. If you press button once, the audio output is switched to the firstchannel of FM transmitter, 88.3MHz, with one beep.through the integrated stereo speakers .<Note>Please make sure the channel of car radio receiver also need to bechanged to be the same frequency of ABT-C100 channel of FM transmitter, 88.3MHz, with one beep. If you press button again, the channel moves to 88.5MHz with twobeeps. If you press button again, the channel moves to 88.7MHz with three beeps.If you press button again, the channel moves to 88.9MHz with four<Note>FM radio usually allows better communication performance and soundquality.<N t >beeps.If you press button again, it returns to the default, internal speakers, with low beep tone. The sequence repeats on every press of button.Long press of FM button at any state make return to the default, internalspeaker, with low beep tone .<Note>Change of FM channel during a call make beep tone distorted with howling sound by audio feedback because both microphone andspeaker are operating..<Note>You have to allow 4 seconds between button press.ChannelHow to use buttonSoundFrequency<Note>You have to allow 4 seconds between button press.ChannelHow to use button Sound FrequencyCh1 Press button 1 high beep tone 88.3MhzCh2 Press at ch1 2 high beep tones 88.5MhzCh3 Press at ch2 3 high beep tones 88.7MhzCh4 Press at ch3 4 high beep tones 88.9MhzSpeakers Press at ch4 1 low beep tone Speakers
(5) Controlling ABT-C1002120(5) Controlling ABTC100 Function Button Previous State Duration of press Tone LEDConnectionTPffM t th i ht( )4i i b tLdhtBlLEDTurn onPower offMove to the right(→)4 increasing beep tonesLong and short Blue LED Turn off Operating Move to the left(←) None NoneConnecting/ReconnectingDisconnected None Two consecutive combination tones, one for HFP, the other for A2DP - Connected: high beep toneConnection failed: low beep toneRed LEDDisconnectedConnectedPress-Connection failed: low beep toneConnectedPairingAny state except pairing and connectingLong press 2 low beep tones Red LED and Blue LEDInitializeAny state except pairing and Press and hold 8 seconds2 low beep tones Three blue and one Red LED(RED/BLUE f 1 d)pgconnecting secondsp(RED/BLUE from 1 sec passed)Switch the user Any state except pairing and connecting PressTwo consecutive combination tones, one for HFP, the other for A2DP - Connected: high beep tone- Connection failed: low beep toneRed LED for connectingBlue LED for connectedAudio (Music)Play Stop/Pause Press None Blue LEDPause Play Press None Blue LEDStop Playing/Pause Long Press None Blue LED-30 minutes of unconnected state triggers automatic power-offRewind/ Forward Playing/Pause Press None Blue LEDFast rewind / Fast forward Playing Press and hold None Blue LED30 minutes of unconnected state triggers automatic powerofffeature. Slide the power switch off and on to power up
(5) Controlling ABT-C1002322(5) Controlling ABTC100 Function Button Previous State Duration of press Tone LEDTalkListing the last numbers dialedStandbyPress None Blue LEDnumbers dialedyCall No. enteredNo. selectedPress None (Progressing tones from telephone network) Blue LEDReceive Ringing Press None Blue LEDEnd a callDuring a callPress1 high beep toneBlue LEDEnd a callDuring a callPress1 high beep toneBlue LEDReject a call Ringing Long press 1 high Beep tone Blue LEDMute / Unmute －During a call Long press 2 Beep tones Blue LEDVoice dial Standby Long press 1 high beep tone Blue LEDClthVi diliCancel the Voice dialVoice dialing state Press None Blue LEDCall waiting During a call Long press None Blue LEDTransfer device During a call Long press None Blue LEDFM transmitterAudio RX-FM1 Internal Speaker Press 1 high beep tone Blue LEDAudio RX-FM2 FM1 channel Press 2 high beep tones Blue LEDAudio RX-FM3 FM2 channel Press 3 high beep tones Blue LEDAudio RX-FM4FM3 channelPress4 high beep tonesBlue LEDAudio RXFM4FM3 channelPress4 high beep tonesBlue LEDInternal speakers FM4 channel Press 1 low beep tone Blue LEDinternal speakers Any FM channel Long Press 1 low beep tone Blue LEDCCommonVolume Up / Down ＋/－During a callPlaying Press None Blue LED
(6) State of ABT-C1002524(6) State of ABTC100Function Button Description Tone LEDConnectionTurn on Power up 4 increasing beep tones Long and short Blue LED TffPdNNTurn offPower downNoneNonePower On Auto Connecting None Automatic connection to the last connected device None Fast Red LEDConnecting or Connecting to paired device Fast Red LEDConnected None Bluetooth link connected state Blue LED every 3 Sec.Unconnected None Bluetooth link unconnected state Red LED every 2 Sec.Connection succeeded None Succeeded to connect the device Two consecutive high beep tonesConnection Failed None Failed to connect the device Two consecutive low beep tonesPairing or Two devices share their information 2 low beep tones Red LED and Blue LEDInitialize or Clears the registered device informationNeeds only for production line2 low beep tones Three blue and one Red LED(RED/BLUE from 1 sec passed)Switch the userorChange the user from User1 to Two consecutive combination tones, one for HFP, the other for A2DP Red LED for connectingSwitch the user or User2 or vice versa - Connected: high beep tone- Connection failed: low beep toneBlue LED for connectedAutomatic Power Off None Unconnected for 30 minute triggers power off. Audio (Music)Play / Pause None Blue LEDStop None Blue LEDRewind/ Forward / None Blue LEDFast rewind / Fast /NBl LEDFast rewind / Fastforward/ NoneBlue LEDCommonVolume Up / Down ＋/－None Blue LED
(6) State of ABT-C1002725(6) State of ABTC100 Function Button Description Tone LEDTalkListing the last numbers dialedNone Blue LEDnumbers dialedCall None (Progressing tones from telephone network) Blue LEDReceive None Blue LEDEnd a callEnds a call during connecting and 1 high beep toneBlue LEDEnd a callconnected.1 high beep toneBlue LEDReject a call Rejects incoming call 1 high Beep tone Blue LEDMute / Unmute －2 Beep tones (high +low) Blue LEDVoice dial1 high beep tone (Sometimes hard to hbbi idihi )Blue LEDVoice dial hear by being mixed with voice prompt)Blue LEDCancel the Voice dial None Blue LEDCall waiting Puts on hold the current call and receives the incoming call or the call held beforeNone Blue LEDthe incoming call or the call held beforeTransfer device Trans the call from ABT-C100 to the phone and vice verse on each press None Blue LEDFM transmitterAudio RX-FM1 Set audio RX path to 88.3MHz of FM radio 1 high beep tone Blue LEDAudio RX-FM2 Set audio RX path to 88.5MHz of FM radio 2 high beep tones Blue LEDAudio RX-FM3 Set audio RX path to 88.7MHz of FM radio 3 high beep tones Blue LEDAudio RX-FM4 Set audio RX path to 88.9MHz of FM radio 4 high beep tones Blue LEDInternal kSet audio RX path to internal stereo k1 low beep toneBlue LEDspeakers speakers1 low beep toneBlue LEDInternal speakersLong press of FM button returns the Audio RX path to the internal stereo speakers at any state1 low beep tone Blue LED
4A29285) ABT-C100 does not operate well with the Bluetooth gateway device- Though ABT-C100 and your gateway device comply with Bluetoothspecification (1.2, 2.0,or 2.1) there can be compatibility problembecause of differences in realization. Please check to the sales4. Annex(1) Troubleshooting & FAQ1) Cannot turn my ABT-C100 onbecause of differences in realization. Please check to the salesrepresentative.6) Redial and voice dial- These features operate when your paired device supports them.Please check the phone’s manual for further details.- ABT-C100 battery may be overdrawn. Try recharging the unit.2) Crackling noise is heard- Bluetooth devices are short range RF communication product andth di t b t th i d d i t t d 10 t7) ABT-C100 does not respond to any button press- Needs power cycle.8) Battery operating time is short compared to the ABT-C100 user guidethe distance between the paired devices must not exceed 10 meters. -Bluetooth device is RF product and is so sensitive to an obstaclebetween your ABT-C100 and the paired device. - Some electrical devices such as microwave oven generate a radiofrequency noise to interfere your ABT-C100 to communicate withthe Bluetooth device- Naturally, the battery capacity decreases with time passed. - Locating the battery in the place outside the temperature range of 0 to 40 degree Celsius dramatically decreases the battery capacity.- Warranty period of battery is six months.- Please visit a service center to replace the battery.the Bluetooth device. - For best audio quality, put the paired device in line of sight fromyour ABT-C100. 3)Cannot hear anything(2) Description on some terminology1) Bluetooth is a radio technology that connects devices, such as mobile phones and headsets, without wires or cords over a short distance )yg- Make sure the Bluetooth gateway device is connected to yourABT-C100. - Increase the volume on the ABT-C100.(approx.10meters).- Because of electronic interference with other devices, abnormal operations or noise may occur.Electronic interference can occur because Bluetooth uses a 4) Difficult to pair and connect even though the Bluetooth gateway deviceis working - ABT-C100 registry might be deleted from your gateway device,such as mobile phone. Follow the steps for pairing and connection.- The connection process might be stuck. Do the connection processfrequency range which is used by Industrial, scientific, medicaldevices, a microwave oven, or a wireless LAN. Bluetooth devicesmust be apart from these devices. after power cycle.
31303) Advanced Audio Distribution Profile (A2DP) is Bluetooth profile which can deliver stereo sound. To enjoy stereo music, both Bluetoothdevices connected together support A2DP.- Depending on environments where Bluetooth devices are used, abnormal operations or noise may occur.If your body interfere signal transmission, abnormal operations or noise may occur. If part of your body like hands contacts around radio4) Audio/Video Remote Control Profile (AVRCP) is Bluetooth profile that a device can remote control the connected device. To use AVRCP, both Bluetooth devices connected together support AVRCP.circuit area sending or receiving electronic waves, abnormaloperations or noise may occur.Because radio wave strength is changed by an obstacle, such aswall, partition, or others, noise may occur depending on your position. 5) Pairing creates a unique and encrypted link between two Bluetooth devices and lets them communicate with each other. - During a call, a noise may take place if the unit and the gateway device,such as mobile phone, are not located close enough to radio communicate.If this condition continues, the Bluetooth connection between ABT-C100 and the gateway device may be disconnected6) Pairing mode is the state in which the Bluetooth gateway device canpair. After paired, it can be connected.7) Connected mode is the condition that a two Bluetooth devices areli k d t th l i ll I thi t t th di b li t d d llABTC100 and the gateway device may be disconnected.- Functions of each Bluetooth device can be different according to realization of their company.To get more information: www.bluetooth.com.linked together logically. In this state, the audio can be listened and callcan be made8) Standby mode is when a Bluetooth device is idle waiting for a call or audio play The Blue connection is madeg2) Bluetooth profiles are predefined functions by Bluetooth SIG for manykinds of device dependant protocols. Bluetooth gateway, such asmobile phone, supports either the headset profile, the hands-free profile,call or audio play. The Blue connection is made.9) If you do not connect a Bluetooth device for 30 minutes after power up, the unit goes powered off.or both. To implement a profile, all mandatory features must besupported.- Headset profile: mono headset profile- Hands-free profile : the profile proper to make a call through theconnected mobile phone- Advanced Audio Distribution Profile / Audio Video Remote Control Profile(A2DP/AVRCP) : specification which can play stereo
3332(4) FCC StatementThis device complies with part15 of the FCC Rules. Operationis subject to the following conditions: (1) This device may not cause()(3) Safety and general information1) Safety guidelines- Do not use ABT-C100 in a danger of ignition of flammable gases.-To avoid any damage or malfunction, do not drop the unit from highplaces.harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation. Changes or modification net expressly approved by the partyresponsible for Compliance could void the user’s authority to operatethe equipment. Connecting of peripherals requires the use of groundedshielded signal cablesplaces.- Do not modify, repair and disassemble the unit at discretion.- Keep away the unit from humidity, water, and any other liquid. If the unit is exposed to water, moisture, and other liquid, power off immediately and dry it. Contact to the sales representative. - Do not use chemical products to clean the unit.shielded signal cables.RF exposure statementsThis equipment complies with FCC RF radiation exposure limits setforth for an uncontrolled environment This equipment should be- Use only +5V supply to charge. Accompanied charging cable isrecommended, but any standard USB cable can be used. Thecharging connector is mini-USB type B.- Place the unit between 10 to 40 degree Celsius when not using fora long period of time. forth for an uncontrolled environment. This equipment should beinstalled and operated with a minimum distance of 20 centimetersbetween the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.<Note>- Avoid from using the unit around medical devices. - Please check if the local laws restrict the use of mobile phones while driving. It is the owner’s responsibility to use this product incompliance with the local laws. - Do not use the unit at high volume for very long. With continued use athi hlbtdtthdllThe manufacturer is not responsible for any interference caused byunauthorized modifications to this equipment. Such modifications couldvoid the user’s authority to operate the equipment. highvolume,your ears maybecome accustomedtothesoundlevel,which may result in permanent damage to your hearing without anynoticeable discomfort.- Replacement or service must be done at a qualified service center orreturned to the manufacturer. -This wireless device can not be used to services related to life safety(5) European Union NoticeProducts with CE marking comply with the R&TTE Directive(99/5/EC),the EMC Directive (89/336/EEC) and the Low Voltage Directive(73/23/EEC) issued by the Commission of the European Community.This wireless device can not be used to services related to life safety because it is vulnerable to radio interference.2) Exemption Clause- Manufacture company, sale company and commercial agent are notresponsible for accidental injuryand damagecausedbyconsumer’s(73/23/EEC) issued by the Commission of the European Community.pjygyfault. - This user guide is made with present specifications.-Specifications and direction for use change without advance notice to improve ABT-C100.
3534Household users should contact either the retailer where they purchased this product or their local government office, for details of where and how they can take this item for environmentally safe recycling. (6) Safety1)CautionDanger of explosion if battery is incorrectly replaced.Replace only with same or equivalent type.Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.(8) Warrantypy q yp2)Batteries shall not be exposed to excessive head such as sunshine,fire or the like.Please note that this product uses radio frequency bands not(8) WarrantyThe condition of the warranty and our accompanying responsibilities are as follows. Supplier’s warranty is non-transferable and this warranty islimited to the original purchaser only. harmonized within EU. Within the EU this product is intended to be usedin Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland,Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in iceland, Norway and Switzerland. Bluetoothis a trade mark owned by the Bluetooth SIG, Inc - You must be able to prove the date of purchase for the new productwith a dated receipts.- The warranty is not applicable if the product has been subject tophysical abuse, improper installation , modification or repair byunauthorized personnel. (7) WEEE symbol informationCorrect Disposal of This Product- The responsibility of supplier’s products shall be limited to the repairor replacement of the product at it’s sole discretion. - Specifically, limited-life consumable components which are subject tonormal wear and tear, such as battery, are exempted from anywarranty.Correct Disposal of This Product(Waste Electrical & Electronic Equipment)(Applicable in the European Union and other European countries with separate collection systems.)- A supplier will not take any responsibility if the failure of the unit isresulted from accident, abuse, misuse, or any unauthorized repair, modification, or disassemble.- Modification and repair of the unit should be done by authorized andqualified service personnel, authorized service center, or manufacturer.pyThis marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. Important note : To comply with RF exposure requirements, this device may not be co-located with any other transmitter or antenna.To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
3736

Navigation menu