Sepura plc STP8040 TETRA Portable Terminal User Manual Quick Reference Guide
Sepura plc TETRA Portable Terminal Quick Reference Guide
Contents
User Manual 4
Quick Reference Guide STP8000 Navi-knob™ sepura STP8000/8100 STP8100 Emergency Key Tri-colour LED Antenna Duplex Earpiece and Half Duplex Microphone Mode key On/Off Blue LED Soft Key (Call Clear Key) Soft Key (Missed Event) PTT Rugged Accessory Connector Left Context Key Right Context Key Navigation Keys Red Telephone Key Green Telephone Key Duplex Microphone Alpha-Numeric Keypad (Half-Duplex speaker behind) Sepura plc Radio House, St Andrew‟s Road, Cambridge, CB4 1GR England www.sepura.com Half-Duplex Speaker Facility Connector SPR-DOC-01189 Issue 2 © Sepura plc 2009 Switch On Press the Mode Key. Switch Off Press & Hold the Mode Key. Volume Adjust Rotate the Navi Knob™. Emergency Call Press and hold the Emergency Key. Change Talkgroup Press the Mode Key once, and then rotate the Navi Knob™ to choose from the list of talkgroups in the current folder, or dial the number of the talkgroup using the keypad. Wait or press the PTT to activate the new talkgroup. Change Folder Press the Mode Key once, and then use the Up and Down Navigation Keys to select a talkgroup folder. Then change the talkgroup as explained above. Talkgroup Call Press the PTT. Call one Radio Dial the radio number and select (using Up/Down Navigation Keys), then press PTT to start the call. Telephone Call Dial the required number and select (using Up/Down Navigation Keys), and then press the appropriate Context Key to start the call. To end the call press the other Context key. Send Status Press the Mode Button twice and then rotate the Navi Knob™ to select a status value. Press PTT twice to send to the currently active talkgroup. These messages can also be accessed from the menu structure. Menu Access From the default screen: Press the Down Navigation Key once to see the menus available; Press the Left or Right Navigation Key to move across and select the menus; Press the Down Navigation Key to enter menu; Press the Left or Right Navigation Key to move across the cards within the menu. Press and hold the Up Navigation Key to exit the menus and return to the default screen. Alternatively, do nothing and the default screen will reappear after a timeout. Activating Menu Options Some menu cards allow you to alter settings within the radio by checking or unchecking a checkbox. Press the appropriate Context key to activate a function and „check‟ its checkbox or to deactivate a function and „uncheck‟ its checkbox. In the Network Selection Menu only one Network can be activated, so the previous network is deactivated automatically. Entering Text Within menu cards that allow text entry, e.g. to send message; Press and hold the Down Navigation Key to start editing; Enter or edit your text as required from the keypad; Press the appropriate Context key to action your changes or to exit. Activating Soft key Functions Press and hold the required soft key. (A list of soft key functions may be displayed on the Help key if programmed.) Some soft keys are a “toggle” function, requiring no further action. Some are navigation keys requiring a second action. Icons Description Icon Description Half duplex call DMO Gateway Broadcast call Signal strength Telephone type call dialling mode DMO Repeater found Transmit Inhibit Battery Emergency call Keypad Locked New message Volume level meter Icon Description Icon Description Missed Call Packet Data session Low battery Scanning Lone Worker Radio Settings Covert Operation WAP Calls not encrypted Calls are E2E encrypted Power from charger Telephone style call Paging Alert Status Messages Turn Navi-knob™ clockwise to move cursor Communication mismatch Turn Navi-knob™ anticlockwise to move cursor DMO Repeater Directory Privacy Mode Call History Group Focus Message Store GPS GPS disabled TETRA type dialling mode Device connected ® using Bluetooth Incoming Call Outgoing Call Folders Network Selection External Alerts Function is activated Messages Short Data Applications Function not activated ® Radio Information Bluetooth On DMO Outgoing Call DMO Incoming Call Man Down Motion and Tilt Sensors On Man Down Tilt Only Sensor Active Man Down Motion Only Sensor Active Icon
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 5 Language : en-GB Tagged PDF : Yes Title : Quick Reference Guide Author : Caroline Taylor Creator : Microsoft® Office Word 2007 Create Date : 2009:11:25 16:01:27 Modify Date : 2009:11:25 16:01:27 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools