Sepura STP9280 TETRA Portable Terminal User Manual Quick Reference Guide

Sepura plc TETRA Portable Terminal Quick Reference Guide

Contents

QS guide

Quick Reference Guide  STP9000/9100/9200 sepura         Missed Event Notification LED  Sepura plc Radio House, St Andrew’s Road, Cambridge, CB4 1GR England www.sepura.com SPR-DOC-03037 Issue 2 © Sepura plc 2013 Emergency Key Antenna Facility Connector Earpiece and top Microphone Missed Event Soft Key  Rugged Accessory Connector Red Cancel / Home key (Press and hold for Home)  Bottom Microphone   Speaker behind keypad STP9000 Navi-knob™ Status LED On/Off and Mode key Side Soft Key PTT 2 Context Keys 4 way Navigation Keys Green Select Key Keypad and press and hold Soft keys  STP9200 For the STP9200, the two keys labelled as context keys are programmable soft keys.          Keys I, II, III are  programmable soft keys   Please use the  Green and Red keys to select and cancel functions Variations  STP9100   For the STP9100, please refer to the STP9000 image, but note that the  0-9, * and # keys are not present
 Switching On Press and release the Mode Key.   Switching Off Press & Hold the Mode Key until instructed to release.   Volume Adjust Rotate the Navi-knob™.   Emergency Call Press and hold the Emergency Key.   Changing current  Talkgroup Press Mode Key once, rotate the Navi-knob™ to choose from list of talkgroups in current folder. Wait 3-4 seconds or press the PTT to select new talkgroup.   Changing current Folder Talk-groups are held in a folder. To Change the current folder press the Mode Key once, then use the Navigation Keys to select the required talkgroup folder. Change the talkgroup as explained above.   Initiate a Talkgroup Call Press the PTT (top mic and speaker active ).   Initiate an Individual radio call Key in radio number and select    (use Up/Down Navigation Keys), or select the radio number from Phonebook, and press PTT to start half duplex call (top mic and speaker active ) or Green Key to start full duplex call (bottom mic and earpiece active).   Initiate a Telephone Call Key in telephone number and select   (use Up/Down Navigation Keys), or select the number from Phonebook, and press appropriate Context Key or Green Key to start call (bottom mic and earpiece active). To end call, press the other Context Key or Red key.   Send Status Press Mode Key twice, then rotate the Navi Knob™ to select a status value. Press PTT twice to send to currently active talkgroup. Status messages can also be accessed from the menu structure. Menu Access  Press the Menu Context key or press the Down Navigation key Menu navigation  Use the Navigation keys  Menu selection Press the Select Context key or press Green key  Menu exit Press and hold the Red key to return to the top level screen ‘Home.’ Pressing the Up navigation key or Back context key will take you back up one menu level  Activating a Soft key function Press and hold a programmed soft key, this could be any of the 0-9, * and # keys. The side soft key and missed event soft key functions are activated by a simple press and release  SDS text entry modes  Press the * key to toggle text input modes from Auto-Capitalisation to lower case, upper case and number entry
     Hint  Press ‘Menu’ Context Key or the Down Navigation key to access the menu   Press and hold the Red key to return to the top level screen  (Home)

Navigation menu