Sequel GVS02GC VOICE COMMAND WATCH User Manual GUESS Connect Fall15 Insert FINAL indd

Download:
Mirror Download [FCC.gov]
Document ID	2769072
Application ID	EIehyA7p9jAebVTirIHVtQ==
Document Description	Confidential_GUESS_Connect_Fall15_Insert_FINAL_Recycle
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	78.23kB (977814 bits)
Date Submitted	2015-09-30 00:00:00
Date Available	2015-10-01 00:00:00
Creation Date	2015-09-01 12:57:55
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-09-24 21:10:45
Document Title	GUESS_Connect_Fall15_Insert_FINAL.indd
Document Creator	Adobe InDesign CS6 (Macintosh)

PAIRING YOUR GUESS CONNECT WATCH
WITH AN ANDROID™ DEVICE
1. On your Android Device,
a. Download the free Guess Connect
App from the Play Store
b. Turn on Bluetooth® – Go to
Settings > Bluetooth on your
device. Turn on Bluetooth.
2. On your Guess Connect Watch:
a. Turn on your watch – Hold the
bottom button for 2 seconds.
Before pairing, your watch battery
should be charged to at least 50%.
Visit
www.guessconnect.com/support/
to register your product, download the app, access the user manual,
F.A.Q.’s and to watch video tutorials, receive firmware update notifications
and contact information.
GUESS_Connect_Fall15_Insert_FINAL.indd 1
b. Enter pairing mode on the watch
– Press and hold the top button
until the blue light begins flashing
steadily, then release.
“Pair Ready” will appear on the
display of your watch. If the light
goes out before completing the
next step, simply repeat this step.
3. Back to your Android Device,
a. Accept Pairing – “Guess Connect
Watch” will appear in the device
menu. Tap “Guess Connect Watch”,
and “OK” for Bluetooth pairing.
b. Grant Permissions – Two to three
pop-up windows will appear
asking permission to connect to
contacts and MAP profile. Select
“OK” to each.
c. Receive SMS and other
notifications – Go to the Guess
Connect App on your device
for notification setup. Turn on
Accessibility Services > Guess
Connect > Turn “ON”. The return
button takes you back to the
Guess Connect Alerts screen.
You may now customize the alerts
you would like to receive.
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Sequel AG
is under license. Other trademarks and trade
names are those of their respective owners.
“Made for iPod Touch,” “Made for iPhone,”
and “Made for iPad” mean that an electronic
accessory has been designed to connect
specifically to iPod Touch, iPhone or iPad,
respectively and has been certified by the
developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance
with safety and regulatory standards. Please
note that the use of this accessory with iPod
Touch, iPhone or iPad may affect wireless
performance. iPod Touch, iPad and iPhone are
trademarks of Apple Inc., registered in the U.S.
and other countries.
IOS is a trademark or registered trademark
of Cisco in the U.S. and other countries and is
used under license.
Portions of this page are reproduced from
work created and shared by the Android
Open Source Project and used according to
terms described in the Creative Commons 2.5
Attribution License. Android is a trademark
of Google Inc.
MARTIAN is a trademark of SilverPlus, Inc.
This guide is published by Sequel AG, without
any warranty. Improvements and changes
to this guide necessitated by typographical
errors, inaccuracies of current information, or
improvements to programs and/or equipment
may be made by Sequel AG at any time
without notice. Such changes will, however, be
incorporated into new editions of this guide.
All rights reserved.
PRODUCT INFORMATION GUIDE
9/1/15 12:57 PM
PRODUCT OVERVIEW
LED Light
Notifies users of events
Green: Incoming Call
Red: Smart Movement
Battery Low or Charging
Blue: Incoming text or app
notification (Facebook, Twitter,
Email, Weather and Calendar)
OLED Display
Shows incoming caller ID, texts,
notifications. Scrolls text
messages and notifications,
displays smart movements
battery life and other information
Charging Port
Micro USB Charging Port
Answer / End / Initiates
Top Button answers incoming
calls, disconnects calls when
finished, and initiates voice
commands.
Set / Change Analog Time
Pull out crown and twist to set the
quartz analog movements time
Rejects / Toggles Volume / Menu
Bottom button rejects incoming
calls, toggles through volume,
and accesses the menu.
GUESS_Connect_Fall15_Insert_FINAL.indd 2
KEY FEATURES
GETTING STARTED
• Place and Answer phone calls
• Be notified of incoming calls, texts,
emails, calendar and social media
events with a vibration and LED light
• See who is calling or texting and view
event information on the OLED
• Read text messages on scrolling
OLED display or listen to messages
with “text-to-speech” via voice
command functionality
• Dictate and send text messages with
“’speech-to-text” via voice command
• Initiate voice commands to set
calendar events, create reminders,
and search for information
• Use as a remote shutter for
your camera
• Quartz Watch movement to tell
the time
Turning Your Watch On
• Charging is done via the enclosed
micro USB cable. Attach the USB
cable to a computer USB port
or to a USB wall outlet adaptor
(not included). If the LED light on
your watch is RED, your watch
is charging. When the LED light
turns GREEN your watch has a
full charge.
• Press and hold the bottom
button for 2 seconds. When the
watch comes on, you will see
the OLED display turn on. If the
watch does not turn on, it will
need to be charged.
Set Analog Time
• Gently remove the battery stopper
from the crown. Turn the crown
clockwise to set the time. Push the
crown in towards the case.
PAIRING YOUR GUESS CONNECT WATCH
WITH AN iOS DEVICE - iPhone, iPad and iPod Touch
1. On your iOS Device:
a. Download the Guess Connect App
– Go to the App Store; Search for
“Guess Connect” and download
the app.
3. Back to your iOS Device:
a. Enter Pairing – “Guess Connect
Watch” will appear on your iOS
device’s Bluetooth menu. Tap
“Guess Connect Watch”.
b. Turn on Bluetooth® – Go to
Settings > Bluetooth on your
device. Turn on Bluetooth.
b. Accept “Bluetooth Pairing
Request” – A pop-up window will
appear on your device, telling you
that Guess Connect Watch would
like to pair with your device and
give you a 6 digit code. The same
6 digit code will appear on your
Guess Connect OLED Display.
2. On your Guess Connect Watch:
a. Turn on your watch – Hold the
bottom button for 2 seconds.
Before pairing, your watch battery
should be charged to at least 50%.
b. Enter pairing mode on the watch
– Press and hold the top button
until the blue light begins flashing
steadily, then release.
“Pair Ready” will appear on the
display of your watch. If the light
goes out before completing the
next step, simply repeat this step.
Next, tap “Pair” to complete the
pairing process. The menu should
now read “Guess Connect Watch
(6 digit code) Connected”. The
watch should vibrate and read
“Paired to (device name)”. If the
codes do not match, tap “cancel”
and try again.
c. Connect to the Guess Connect
App – A pop-up menu will
appear on the Guess Connect
App requesting to communicate
with the Guess Connect Watch.
Tap “Allow”. Your iOS device will
then display the Home page of
the Guess Connect App. Tap the
Connect setting to “ON”. The
menu heading will read “Watch
is connected”.
e. Modify Guess Connect App
Alert Settings - From the Guess
Connect App on your device,
navigate between four primary
screens to set up other features
and alerts. (These steps, which
set up other features and alerts,
may be done now or later.)
d. Receive SMS and other
notifications – Press the Home
button on your device and go
to Settings > Bluetooth. Tap the
button to the right of “Guess
Connect Watch”. Turn “Show
Notifications” to “On”.
IMPORTANT: Before moving on,
tap the Bluetooth “off” and then
back “on”. Now tap the Guess
Connect button below on the
device menu to reconnect. You are
now paired and ready to receive
your notifications.
9/1/15 12:57 PM
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或
變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善
至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫
療用電波輻射性電機設備之干擾。
Canada, Industry Canada (IC) Notices
“This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this devicemust accept any
interference, including interference that may cause undesired operation of the device."
Canada, avis d'Industry Canada (IC)
“Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement."
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may cause undesired operation of the device.
RF Expouse
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the
specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 3
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2015:09:01 12:57:55-04:00
Metadata Date                   : 2015:09:01 12:57:56-04:00
Modify Date                     : 2015:09:24 21:10:45+08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:43ee8727-65d0-a24a-9b41-ffed13293510
Original Document ID            : xmp.did:B271B6C1162068118C14F8947482F412
Document ID                     : xmp.id:47AA5E16192068118083E973BC537B1C
Rendition Class                 : proof:pdf
Version ID                      : 1
Derived From Instance ID        : xmp.iid:44AA5E16192068118083E973BC537B1C
Derived From Document ID        : xmp.did:A3A7C3A51E2068118083D2797C1BF70B
Derived From Original Document ID: xmp.did:B271B6C1162068118C14F8947482F412
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2015:09:01 12:57:55-04:00
Format                          : application/pdf
Title                           : GUESS_Connect_Fall15_Insert_FINAL.indd
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Creator                         : Adobe InDesign CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools