Sercomm DBC835 Wireless HD DoorBell Camera User Manual ADT DBC835 1026 QIG v2 to David

Download:
Mirror Download [FCC.gov]
Document ID	3682339
Application ID	fTaebgEOvoPErZ8Z+q8+mA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.74kB (759246 bits)
Date Submitted	2017-12-18 00:00:00
Date Available	2018-06-16 00:00:00
Creation Date	2017-12-18 11:06:06
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2017-12-18 11:06:06
Document Title	Microsoft Word - ADT_DBC835_1026_QIG v2_to David
Document Creator	PScript5.dll Version 5.2.2
Document Author:	admin

ADT
T Pulse
eÂŽ Interactivve Solu
utions
DBC835
Wirelesss HD Doorb
bell Ca
amera
Quick Insttallatio
on Guide
Property of ADT
T, LLC. Inforrmation accu
urate as of pu
ublished datte and is provided
warranty of any
a kind.
“as is” without w
017ADT LLC
C dba ADT Security
Serv
vices. All rig
ghts reserve
ed. ADT, the ADT
Š20
logo
o, 800 ADT.A
ASAP and th
he product/s
service nam
mes listed in this
t docume
ent are
marrks and/or re
egistered ma
arks. Unautthorized use
e is strictly prohibited.
DBC
C835
Ch
hapter 1
In
ntrodu
uction
Thiss Chapter p
provides details
of th
he Doorbelll Camera'ss features,
com
mponents a
and capabilities.
Pa
ackage C
Contentts
The
e following items are included in
n the packa
age.
1. Doorbell
Camera x 1
2. Two
Mountting Bracke
ets (Small & One gan
ng-box size
e)
3. Wood
Scre
ew/Anchor x 2
4. Gang
Box S
Screw x 2
DBC835
Wireless
Dooorbell Came
era Installation
Chapter 1: Introduction
Overview
DBC835 supports both analog and digital chime within AC 8-24 voltage.
The operation temperature is –4°F to 122°F. (–20°C to 50°C)
(The battery will not be charged when the temperature is < 0°C)
Figure 1: Front Panel
Figure 2: Rear Panel
DBC835 Wireless Doorbell Camera Installation
Chapter 1: Introduction
Physical Details
Doorbell/WPS
Button
LED Behavior
This button has two functions:
1. WPS Pin Code Mode. When pressed and held for
0-10 seconds, the doorbell camera will be in the
WPS Pin Code mode.
Note: When WiFi connection is established, the WPS
function is disabled.
2. Doorbell. Press the button to ring the bell.
Off - No power.
On (Blue) - Power On / Network connection is
available.
Blinking (Green). The WPS connection is active.
On (Red) - If the LED is on for 5 seconds and
then turns off, the WPS function has failed.
Blinking (Red) - Network connection is failed.
Spinning (Green). The firmware is being
upgraded.
Intermittent Blinking (Red) – If the LED is
blinking for 2 seconds, means AC power is
disconnected.
DBC835 Wireless Doorbell Camera Installation
Basic Setup
This section provides information on how to assemble and
configure the DBC835 Doorbell Camera for enrollment.
Installation
1. Power Up and check the LED
Turn on the switch on the rear side of the doorbell camera and wait for
20 seconds until the LED turns to flashing red.
Note 1: The internal battery usually could last 40 minutes of operation.
If you don’t see the camera powering up, please charge the doorbell
camera via Micro USB cable with USB charger for 2 hours before
installation.
Note 2: If the LED does not flash red, please hold the reset button for
15 seconds to factory default the camera then start the installation
process over.
Figure 3: Power LED
2. Enroll the Camera in ADT Pulse
This process is described in Chapter 3 ADT Pulse Enrollment.
3. Mount the Doorbell Camera
Mount the camera in its final permanent location. Please refer to
Chapter 4 Hardware Installation for more details.
DBC835 Wireless Doorbell Camera Installation
ADT Pulse Enrollment
This section provides instructions for wirelessly enrolling
the DBC835 Doorbell Camera into the ADT Pulse network.
This process uses the Wi-Fi Protected Setup (WPS) with PIN method
to wirelessly enroll the HD Camera to the gateway via the ADT Pulse
Portal or TS Installer App.
Using WPS with PIN to Enroll the Doorbell Camera
1. Power up the camera and wait for the LED turning flashing red, as
described in the previous chapter.
2. Launch an Internet browser and log in to the Pulse portal or TS
installer app.
3. Enter the Manage Devices screen using one of these methods:
For the Pulse portal, select the System tab and click Manage
Devices.
For the TS installer app, click the following Pulse Devices link:
https://portal-aries.icontrol.com/myhome/9.6.0-323/access/signin.jsp
4. In the Manage Devices screen, click Cameras.
Figure 4: Clicking "Cameras" Button
DBC835 Wireless Doorbell Camera Installation
Chapter 3: ADT Pulse Enrollment
5. Click the Add Using WPS button at the bottom of the screen.
Figure 5: Clicking "Add Using WPS" Button
6. Locate the camera’s PIN number on the label on the rear of the
camera. Enter the PIN number in the WPS PIN field.
Figure 6: Entering the PIN
DBC835 Wireless Doorbell Camera Installation
Pu
Chapter 3: ADT Pulse Enrollment
7. Press the Ring button, the LED would be turned to blinking green for
WPS process.
Note: This WPS process must be completed within 2 minutes or else
it will be time out. The remaining time is displayed in the upper left
portion of the screen.
8. Click the Continue button to initiate the WPS process.
Figure 7: Clicking "Continue" Button
Figure 8: Add Camera Using WPS Screen
DBC835 Wireless Doorbell Camera Installation
Chapter 3: ADT Pulse Enrollment
9. If the doorbell camera is enrolled, the Camera Details screen will be
displayed. Name the device and select the desired bandwidth & chimer
type. Click Save after entering all the data.
Figure 9: Saving Camera Details
10. The newly-added device will be shown in the Cameras list, then click
Go Back at the top left of the screen.
Figure 10: Clicking Go Back Button
DBC835 Wireless Doorbell Camera Installation
Chapter 3: ADT Pulse Enrollment
Pu
11. The Manage Devices screen is displayed. Click Close.
Figure 11: Manage Devices Screen
12. Click "System" page to check if the device is enrolled already.
Figure 12: System Screen
13. Move the camera to where the doorbell button is located and check
the LED to see if the camera still has WiFi connectivity.
Note: If the WiFi cannot reach the front doorbell camera, you will see
the power LED kept blinking red. Then a repeater is required or move
the CloudLink/TSS to the center of the house.
10
DBC835 Wireless Doorbell Camera Installation
Hardwa
are In
nstalla
ation
Thiss section prrovides dettails for wall mounting
g of the DB
BC835
Doo
orbell Cam
mera.
Ins
stallation
at the camera is conffigured and
d enrolled in ADT
Note: Ensure tha
Pulse before perrmanently mounting itt.
1. Turn off the breaker circuit.
Figure
13: Breaker C
Circuit
A wires. (The
2. Unscrew tthe legacy doorbell and you wil l find two AC
recommen
nded installlation heig
ght of the ccamera is about
120~
~150cm)
Fig
gure 14: Mounting
Lo
ocation
DBC835 Wire
eless Doorb
bell Camera
a Installatioon
11
Chapter 4: Hardware Installation
3. Choose the mounting bracket to be able to cover the hole of the
legacy doorbell button.
Figure 15: Choosing Mounting Bracket
4. Use the AC wires from the existing traditional doorbell and connect the
AC wires to screw terminals of the bracket.
Figure 16: Connecting the AC Wires
12
DBC835 Wireless Doorbell Camera Installation
Chapter 4:: Hardware
e Installatio
on
5. Secure the
e bracket with
w screws
s. Please ssee Figure
e 17.
Note: Inse
ert the anch
hors if necessary.
Figure 17: Ins
stalling the
e Screws
6. Attach
the d
doorbell ca
amera to th
he mountin g bracket. Make sure
e the
doorbell cam
mera is firm
mly fixed and
a working
g properly..
Caution: To avoid damaging the rubberr of the pogo pin, ple
ease
he camera to the mou
unting braccket horizo
ontally.
attach th
Figure 18: Attaching
the
t Camerra to the Brracket
7. Turn on the breaker circuit.
if the
e chime is working
no
ormally afte
er pushing the Ring button.
If
8. Check
AC wires arre not conn
nected prop
perly, the rred LED will
w blink eve
ery 5
se
econds.
Note 1: Plea
ase check if the soun
nd of chime
er works as
s usual. Th
he chime
ype could b
be manage
ed in ADT pulse
enro
ollment process.
ty
Note 2: Com
mpatibility Issue
of dig
gital chime
e models and
a if the chimer is
no
ot working properly, please cha
ange to An
nalog Chim
mer.
Note
3: Che
eck WiFi signal and if the powe
er LED blin
nks red, ple
ease add
a WiFi repe
eater or mo
ove the Clo
oudLink/TS
SS to the center
of the house.
DB
BC835 Wire
eless Doorbell Camera
a Installationn
13
Appendix
Chime Compatibility List
Chime Compatibility List
Utilitech
Model # UT-27103-02
Utilitech
Model # UT-2735-02
Utilitech
Model # UT-7574-02
IQ America
Model # DW-2403A
Hampton Bay
Model # HB-7621-02
Honeywell
Model# RCW102N
Honeywell
Model# RCW251N
NuTone
Model# LA100WH
NuTone
Model# LA126WH
Heath Zenith
Model# DC3360

7KLVGHYLFHFRPSOLHVZLWK3DUWRIWKH)&&5XOHV2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZR
FRQGLWLRQV 
 WKLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFHDQG  WKLVGHYLFHPXVWDFFHSWDQ\
LQWHUIHUHQFHUHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQ

$Q\FKDQJHVRUPRGLILFDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFH
FRXOGYRLGWKHDXWKRULW\WRRSHUDWHHTXLSPHQW
7KLVGHYLFHDQGLWVDQWHQQDPXVWQRWEHFRORFDWHGRURSHUDWLQJLQFRQMXQFWLRQZLWKDQ\RWKHU
DQWHQQDRUWUDQVPLWWHU
(QGXVHUVDQGLQVWDOOHUVPXVWEHSURYLGHGZLWKDQWHQQDLQVWDOODWLRQLQVWUXFWLRQVDQG
WUDQVPLWWHURSHUDWLQJFRQGLWLRQVIRUVDWLVI\LQJ5)H[SRVXUHFRPSOLDQFH
)RUSURGXFWDYDLODEOHLQWKH86$&DQDGDPDUNHWRQO\FKDQQHOaFDQEHRSHUDWHG6HOHFWLRQ
RIRWKHUFKDQQHOVLVQRWSRVVLEOH
14
DBC835 Wireless Doorbell Camera Installation
Appendix A: Chime Compatibility List
Regulatory Approvals
FCC Statement (US)
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
x Reorient or relocate the receiving antenna.
x Increase the separation between the equipment and receiver.
x Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
x Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user's
authority to operate this equipment. (Example - use only shielded interface
cables when connecting to computer or peripheral devices).
RF Exposure Part
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body.
DBC835 Wireless Doorbell Camera Installation
15
Appendix A: Chime Compatibility List
IC Statement (Canada)
This device complies with Industry Canada’s licence-exempt RSSs. Operation
is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage ;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your body.
Cet ĂŠmetteur ne doit pas ĂŞtre Co-placĂŠ ou ne fonctionnant en mĂŞme temps
qu'aucune autre antenne ou ĂŠmetteur. Cet ĂŠquipement devrait ĂŞtre installĂŠ et
actionnÊ avec une distance minimum de 20 centimètres entre le radiateur et
votre corps.
Exposure
This device meets the exemption from the routine evaluation limits in section
2.5 of RSS102 and users can obtain Canadian information on RF exposure and
compliance.
Le dispositif rencontre l'exemption des limites courantes d'ĂŠvaluation dans la
section 2.5 de RSS 102 et la conformitĂŠ Ă  l'exposition de RSS-102 rf,
utilisateurs peut obtenir l'information canadienne sur l'exposition et la
conformitĂŠ de rf.
16
DBC835 Wireless Doorbell Camera Installation

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : admin
Create Date                     : 2017:12:18 11:06:06+08:00
Modify Date                     : 2017:12:18 11:06:06+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:12:13 14:13:42+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - ADT_DBC835_1026_QIG v2_to David
Creator                         : admin
Document ID                     : uuid:8351ddc1-9306-471c-b465-9c070094a500
Instance ID                     : uuid:e5f433dd-f7d1-44c2-8796-724fb5aa4e92
Page Count                      : 16

EXIF Metadata provided by EXIF.tools