Sercomm SZDWS04 Micro Door Window Sensor User Manual

Sercomm Corporation Micro Door Window Sensor SZ DWS04 QIG V1 0

a href="https://usermanual.wiki/Sercomm" itemprop="url"> Sercomm >

User Manual

1 SZ-DWS04 ZigBee Door/Window Sensor Installation Guide Specification Frequency 2.4GHz Batter Type CR2032 Battery Sensitivity > 3 cm ( 1.18 inch ) Operating Temperature 0° C to 40° C (32° - 104°F) Storage Temperature -20° C to 60° C (-4° - 140°F) Battery Life 3 years RF Range 40M Dimension Main Unit: 51 mm x 26 mm x 7.4 mm (2" x 1.02" x 0.29") Magnet Unit: 28.3 mm x 15.5 mm x 7.4 mm (1.11" x 0.61" x 0.29") Package Contents
2 Intallation NOTE: Please make sure that the sensor and magnet is located less then 1.27cm (0.5 inch) from each other. Intallation 1. Hold the sensor near the top of the door, close to the opening edge of the door. This is the mounting location for the sensor. 2. Pull the exposed plastic pull tab from the sensor 3. Use either one of the following methods to install the sensor: • Remove the back plate of the sensor; use this as the mounting bracket. Use the screwdriver to secure the back plate to the wall with the screws provided. Then place the hooks into the two holes of the cover and attach the cover to the plate.
Download:
Mirror Download [FCC.gov]
Document ID2399007
Application IDieSJFMbnJOY0JA0m41EM1A==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize20.03kB (250417 bits)
Date Submitted2014-09-23 00:00:00
Date Available2014-09-23 00:00:00
Creation Date2017-10-21 03:17:46
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-21 03:17:46
Document TitleSZ-DWS04_QIG_V1.0.doc
Document CreatorpdfFactory Pro www.pdffactory.com
Document Author: 01697
FCC ID Filing: P27SZDWS04

Navigation menu