Sercomm YFF00 Compact Wireless Network Camera User Manual RC8020 manual

Sercomm Corporation Compact Wireless Network Camera RC8020 manual

Manual

Download: Sercomm YFF00 Compact Wireless Network Camera User Manual RC8020 manual
Mirror Download [FCC.gov]Sercomm YFF00 Compact Wireless Network Camera User Manual RC8020 manual
Document ID811221
Application IDGLbXJ/E7fTK3eksg4918Sg==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize215.21kB (2690082 bits)
Date Submitted2007-07-03 00:00:00
Date Available2007-07-03 00:00:00
Creation Date2007-06-20 15:18:06
Producing SoftwareAcrobat PDFWriter 5.0Windows NT ª©
Document Lastmod2007-06-21 14:36:20
Document TitleRC8020_manual.doc
Document CreatorRC8020_manual.doc - Microsoft Word
Document Author: portia.chien

Wireless Network
Camera
RC8020, RC4020
User’s Guide
Table of Contents
CHAPTER 1 INTRODUCTION..........................................................................................................1
Overview ............................................................................................................................................1
Physical Details - Wireless Network Camera...........................................................................4
Package Contents.............................................................................................................................6
CHAPTER 2 BASIC SETUP ................................................................................................................7
System Requirements .....................................................................................................................7
Installation - Wireless Network Camera...................................................................................8
Setup using the Windows Wizard ...............................................................................................9
CHAPTER 3 VIEWING LIVE VIDEO .......................................................................................... 14
Overview ......................................................................................................................................... 14
Requirements ................................................................................................................................. 14
Connecting to a Camera on your LAN................................................................................... 14
Connecting to a Camera via the Internet............................................................................... 16
Viewing Live Video...................................................................................................................... 18
CHAPTER 4 ADVANCED VIEWING SETUP ........................................................................... 20
Introduction ................................................................................................................................... 20
Adjusting the Video Image......................................................................................................... 20
Controlling User Access to the Video Stream....................................................................... 23
Making Video available from the Internet ............................................................................ 24
Viewing Live Video via the Internet........................................................................................ 26
Motion Detection Alerts .............................................................................................................. 28
CHAPTER 5 WEB-BASED MANAGEMENT............................................................................. 30
Introduction ................................................................................................................................... 30
Connecting to Wireless Network Camera.............................................................................. 30
Welcome Screen ............................................................................................................................ 31
Administration Menu .................................................................................................................. 32
System Screen ................................................................................................................................ 33
Network Screen ............................................................................................................................. 35
Wireless Screen ............................................................................................................................. 37
DDNS Screen.................................................................................................................................. 39
Video Image Screen...................................................................................................................... 41
Video Access Screen..................................................................................................................... 44
User Database Screen .................................................................................................................. 46
Motion Detection Screen............................................................................................................. 47
E-Mail Screen ................................................................................................................................ 48
FTP Screen ..................................................................................................................................... 50
HTTP Screen.................................................................................................................................. 51
Event Trigger Screen................................................................................................................... 52
Maintenance Screen ..................................................................................................................... 54
Status Screen.................................................................................................................................. 56
Log Screen ...................................................................................................................................... 58
CHAPTER 6 WINDOWS VIEWING/RECORDING UTILITY............................................. 59
Overview ......................................................................................................................................... 59
Installation ...................................................................................................................................... 59
System Tray Icon.......................................................................................................................... 60
Main Screen.................................................................................................................................... 60
Camera Setup ................................................................................................................................ 61
Main Screen.................................................................................................................................... 65
Recording Video............................................................................................................................ 67
CHAPTER 7 TROUBLESHOOTING ............................................................................................ 72
Overview ......................................................................................................................................... 72
Problems .......................................................................................................................................... 72
APPENDIX A SPECIFICATIONS .................................................................................................. 74
Wireless Network Camera ......................................................................................................... 74
Regulatory Approvals.................................................................................................................. 74
Copyright Notice........................................................................................................................... 75
APPENDIX B STREAMING VIDEO/AUDIO SOLUTION .................................................... 90
Overview ......................................................................................................................................... 90
Streaming Video/Audio through Internet Camera............................................................. 90
P/N: 956YFF0001
Copyright  2007. All Rights Reserved.
Document Version: 1.0
All trademarks and trade names are the properties of their respective owners.
ii
Chapter 1
Introduction
This Chapter provides details of the Wireless Network Camera's features,
components and capabilities.
Overview
The Wireless Network Camera has an Integrated Microcomputer and a high quality CMOS
digital-Image-Sensor, enabling it to display high quality live streaming video over your wired
LAN, the Internet, and for the Wireless Network Camera, an 802.11g Wireless LAN.
Using enhanced MPEG-4 technologies, the Wireless Network Camera is able to stream high
quality video and audio directly to your PC. The high compression capabilities of MPEG-4
reduce network bandwidth requirements to amazingly low levels.
A convenient and user-friendly Windows program is provided for both viewing and recording
video. If necessary, you can even view video using your Web Browser, on a variety of software
platforms.
Figure 1: Wireless Network Camera
Features
•
Standalone Design. The Wireless Network Camera is a standalone system with built-in
•
CPU and Video encoder. It requires only a power source and a connection to your LAN or
Wireless LAN.
Stream Live Video to Multiple Users. The MPEG4 encoder and HTTP server built
into the camera generate a ready-to-view video stream. Just connect to the camera using
your Web browser or the provided Windows utility to view live video.
•
Suitable for Home, Business or Public Facilities . Whether for Home, Business or
•
Public Facility surveillance, or just for entertainment and fun, the Wireless Network
Camera has the features you need.
Multi-Protocol Support. Supporting TCP/IP networking, SMTP (E-mail), HTTP and
other Internet related protocols, the Wireless Network Ca mera can be easily integrated into
your existing network.
•
Easy Configuration. A Windows-based Wizard is provided for initial setup.
Subsequent administration and management can be performed using a standard web
browser. The administrator can configure and manage the Wireless Network Camera via
the LAN or Internet.
•
Viewing/Recording Utility. A user-friendly Windows utility is provided for viewing
live video. For periods when you are absent, or for scheduled recording, this application
also allows you to record video to an ASF file on your PC. The recorded files are in a
standard Windows Media format, and thus usable by a wide variety of programs if
required.
•
Motion Detection. This feature can detect motion in the field of view. The Wireless
Network Camera will compare consecutive frames to detect changes caused by the
movement of large objects. This function only works indoors due to the sensitivity of the
CMOS sensor. When motion is detection, an E-mail alert can be sent, or some other action
may be triggered.
•
•
•
Flexible Scheduling. You can limit access to the video stream to specified times using
a flexible scheduling system. The Motion Detection feature can also have its own schedule,
so it is active only when required.
Syslog Support. If you have a Syslog Server, the Wireless Internet Camera can send its
log data to your Syslog Server.
Audio Support. You can listen as well as look! Audio is encoded with the video if
desired. You can use either the built-in microphone or an external microphone.
Internet Features
•
•
•
User-definable HTTP port number. This allows Internet Gateways to use "port
mapping" so the Wireless Network Camera and a Web Server can share the same Internet
IP address.
DDNS Support. In order to view video over the Internet, users must know the Internet
IP address of the gateway used by the Wireless Network Camera. But if the Gateway has a
dynamic IP address, DDNS (Dynamic DNS) is required. Since many existing Gateways do
not support DDNS, this function is incorporated into the Wireless Network Camera.
NTP (Network-Time-Protocol) Support. NTP allows the Wireless Network Camera
to calibrate its internal clock from an Internet Time -Server. This ensures that the time
stamp on Video from the Wireless Network Camera will be correct.
Security Features
•
User Authentication. If desired, access to live video can be restricted to known users.
Users will have to enter their username and password before being able to view the video
stream. Up to 10 users can be entered.
•
Password-Protected Configuration. Configuration data can be password protected, so
that it only be changed by the Wireless Network Camera Administrator.
Wireless Features
•
Standards Compliant. The Wireless Network Camera complies with the IEEE802.11g
(DSSS) specifications for Wireless LANs.
•
Supports both 802.11b and 802.11g Standards. The Wireless Network Camera
•
supports both 802.11b and 802.11g standards.
Speeds to 54Mbps. All speeds up to the 802.11g maximum of 54Mbps are supported.
•
Wired and Wireless Network Support. The Wireless Network Camera supports either
•
wired and wireless transmission.
WEP Support. Full WEP support (64/128 Bit) on the Wireless interface is provided.
•
WPA/WPA2 Support. The WPA/WPA2 standard is also supported, allowing advanced
encryption of wireless data.
Physical Details - Wireless Network Camera
Front - Wireless Network Camera
Lens
No physical adjustment is required or possible for the lens, but you
should ensure that the lens cover remain clean. The image quality is
degraded if the lens cover is dirty or smudged.
Microphone
The built-in microphone is mounted on the front.
Power LED
(Green)
On - Power on.
Off - No power.
Blinking - The Power LED will blink during start up. This will take
15 to 20 seconds.
Active LED
(Green)
Off - No user is viewing the camera.
Network LED
(Green)
On - Wireless or LAN connection is detected.
Blinking - User(s) is viewing the camera.
Off - Wireless or LAN connection is not detected
Blinking - Data is being transmitted or received via the LAN or
Wireless connection.
Rear - Wireless Network Camera
Antenna
Attach the supplied antenna here. The antenna is adjustable; best
results are usually obtained with the antenna positioned vertically.
SPKR out
If required, an external speaker can be attached here.
Power Input
Connect the supplied 5V power adapter here. Do not use other
power adapters; doing so may damage the camera.
LAN port
Use a standard LAN cable to connect your Wireless Network
Camera to a 10/100BaseT hub or switch.
Note:
• Attaching the LAN cable will disable the Wireless interface.
Only 1 interface can be active at any time.
•
Reset Button
The LAN cable should only be connected or disconnected when
the camera is powered OFF. Attaching or detaching the LAN
cable while the camera is powered on does NOT switch the
interface between wired and wireless.
This button is recessed; you need a pin or paper clip can be used to
depress it. It can be activated at any time the camera is in the
"ready" mode.
•
•
Restore Default IP Address. When pressed and released, the
Wireless Network Camera will reset to DHCP Client.
Restore Default IP Address, Administrator ID, and
Administrator password. When pressed and held for 3
seconds, the IP address, Administrator ID, and Administrator
Password settings will be set to their default values.
• IP address: DHCP Client
•
Administrator ID: administrator
•
Administrator Password: null (no password)
Note:
After this procedure is completed, the Power LED will blink three
times to confirm that the reset was completed successfully.
Package Contents
The following items should be included: If any of these items are damaged or missing, please
contact your dealer immediately.
1.
2.
3.
Wireless Network Camera
Camera Mount
Antenna
4.
5.
6.
Power adapter
Installation CD-ROM
Quick Installation Guide
7.
Network Cable
Chapter 2
Basic Setup
This Chapter provides details of installing and configuring the Wireless
Network Camera.
System Requirements
•
To use the wired LAN interface, a standard 10/100BaseT hub or switch and network cable
is required.
•
To use the Wireless interface on the Wireless Network Camera, other Wireless devices
must be compliant with the IEEE802.11b or IEEE802.11g specifications. All Wireless
stations must use compatible settings.
The default Wireless settings are:
Mode: Infrastructure
ESSID: ANY
Wireless Security: Disabled
Domain: USA
Channel No.: Auto
Installation - Wireless Network Camera
1. Assemble the Camera
Screw the supplied antenna to the mounting point on the rear.
Attach the Camera Mount to the camera.
2. Connect the LAN Cable
Connect the Wireless Network Camera to a 10/100BaseT hub or switch, using a standard
LAN cable.
For the Wireless Network Camera, this disables the Wireless
Interface, because only one interface can be active.
The LAN cable should only be connected or disconnected
when the camera is powered OFF. Attaching or detaching the
LAN cable while the camera is powered on does NOT switch
the interface between wired and wireless.
3. Power Up
Connect the supplied 5Vpower adapter to the Wireless Network Camera and power up.
Use only the power adapter provided. Using a different one may cause hardware damage.
4. Check the LEDs
•
The Power LED will turn on briefly, then start blinking. It will blink during startup, which
takes 15 to 20 seconds. After startup is completed, the Power LED should remain ON.
•
The Network LED should be ON.
For more information, refer to Physical Details - Wireless Network Camera in Chapter 1.
Setup using the Windows Wizard
Initial setup should be performed using the supplied Windows-based setup Wizard. This
program can locate the Wireless Network Camera even if its IP address is invalid for your
network. You can then configure the Wireless Network Camera with appropriate TCP/IP
settings for your LAN.
Subsequent administration can be performed with your Web browser, as explained in Chapter
5 - Web-based Management.
Setup Procedure
1.
Insert the supplied CD-ROM into your drive. If the setup program does not start
automatically, run NeutralCamera.exe in the root folder.
•
You will see the Welcome screen shown below.
•
Click the Setup Camera button to start the setup Wizard
Figure 2: Welcome Screen
2.
The next screen, shown below, will list all the Wireless Network Cameras on your LAN.
Figure 3: Camera List Screen
•
3.
Select the desired Camera from the list on the left. The current settings for the selected
Camera will be displayed in the table on the right.
• Click Next to continue.
You will be prompted to enter the Administrator Name and Administrator Password, as
shown below.
•
If using the default values, enter administrator for the name, and leave the
password blank.
•
Otherwise, enter the Administrator Name and Administrator Password set on the
Maintenance screen.
Figure 4: Password Dialog
4.
On the following IP Address Settings screen, shown below, choose Fixed IP Address or
Dynamic IP Address.
Figure 5: Fixed or Dynamic IP Selection
•
Fixed IP Address is recommended, and can always be used.
•
Dynamic IP Address can only be used if your LAN has a DCHP Server.
Click Next to continue.
5.
If you chose Fixed IP Address, the following TCP/IP Settings screen will be displayed.
10
Figure 6: TCP/IP Settings
•
Enter an unused IP Address from within the address range used on your LAN.
•
The Subnet Mask and Default Gateway fields must match the values used by PCs on
your LAN.
•
The Primary DNS address is required in order to use the E-mail alert or Dynamic
DNS features. Enter the DNS (Doma in Name Server) address recommended by your
ISP.
•
The Secondary DNS is optional. If provided, it will be used if the Primary DNS is
unavailable.
Click Next to continue.
6.
This screen allows you to enter a suitable Description, and set the correct Time Zone,
Date, and Time. Make any desired changes, then click Next to continue.
Figure 7: Camera Settings
7.
The next screen, shown below, displays all details of the Wireless Network Camera.
•
Click Next if the settings are correct
•
Click Back to modify any incorrect values.
11
Figure 8: Save Settings
8.
Click OK to confirm that you want to save the new settings. If you want to cancel your
changes, click Cancel.
Figure 9: Confirm Screen
9.
After clicking OK , you will see the screen below.
12
Figure 10: Final Screen
Clicking the Install Utility button will install the Viewing/Recording utility described in
Chapter 6 - Windows Viewing/Recording Utility.
10. Click Exit to end the Wiza rd.
Setup is now complete.
13
Chapter 3
Viewing Live Video
This Chapter provides basic information about viewing live video.
Overview
After finishing setup via the Windows-based Wizard, all LAN users can view live video using
Internet Explorer on Windows.
This Chapter has details of viewing live video using Internet Explorer.
But many other powerful features and options are available:
•
To view multiple cameras simultaneously, or record video (either interactively or by
schedule), you should install the Windows Viewing/Recording utility. Refer to Chapter 6 Windows Viewing/Recording Utility for details on installing and using this program.
•
The camera administrator can also adjust the Video Stream, and restrict access to the video
stream to known users by requiring viewers to supply a username and password. See
Chapter 4 - Advanced Viewing Setup for details.
•
To make Live Video from the camera available via the Internet, your Internet Gateway or
Router must be configured correctly. See Making Video available from the Internet in
Chapter 4 - Advanced Viewing Setup for details.
Requirements
To view the live video stream generated by the Wireless Network Camera, you need to meet
the following requirements:
•
Windows 98/98SE, Windows 2000, Windows XP.
•
Internet Explorer 5.5 or later.
Connecting to a Camera on your LAN
To establish a connection from your PC to the Wireless Network Camera:
1. Use the Windows utility to get the IP address of the Wireless Network Camera.
2.
3.
4.
Start Internet Explorer.
In the Address box, enter "HTTP://" and the IP Address of the Wireless Network Camera.
When you connect, the following screen will be displayed.
14
Figure 11: Home Screen
5.
Click View Video.
6.
If the Administrator has restricted access to known users, you will then be prompted for a
username and password.
Enter the name and password assigned to you by the Wireless Network Camera
administrator.
The first time you connect to the camera, you will be prompted to install an ActiveX
component (OCX or CAB file), as in the example below.
You must install this ActiveX component (OCX or CAB file) in order to view the
Video stream in Internet Explorer.
Click the "Yes" button to install the ActiveX component.
7.
Figure 12: ActiveX OCX Prompt
8.
Video will start playing automatically. There may be a delay of a few seconds while the
video stream is buffered.
15
Connecting to a Camera via the Internet
You can NOT connect to a camera via the Internet unless the camera
Administrator has configured both the camera and the Internet Gateway/Router
used by the camera.
See Making Video available from the Internet in Chapter 4 - Advanced Viewing Setup for
details of the required configuration.
Also, you need a broadband Internet connection to view video effectively. Dial-up connections
are NOT supported.
To establish a connection from your PC to the Wireless Network Camera via the Internet:
1.
2.
3.
Obtain the following information from the Administrator of the camera you wish to
connect to:
•
Internet IP Address or Domain Name of the camera.
•
Port number for HTTP connections.
• Login (username, password) if required.
Start Internet Explorer.
In the Address box, enter the following:
HTTP://Internet_Address:port_number
Where Internet_Address is the Internet IP address or Domain Name of the camera,
and port_number is the port number used for HTTP (Web) connections to the camera.
Examples using an IP address:
HTTP://203.70.212.52:1024
Where the Internet IP address is 203.70.212.52 and the HTTP port number is 1024.
Example using a Domain Name:
HTTP://mycamera.dyndns.tv:1024
Where the Domain name (using DDNS in this example) is mycamera.dyndns.tv and
the HTTP port number is 1024.
16
4.
When you connect, the following screen will be displayed.
Figure 13: Home Screen
5.
6.
7.
Click View Video.
If the Administrator has restricted access to known users, you will then be prompted for a
username and password.
Enter the name and password assigned to you by the Wireless Network Camera
administrator.
The first time you connect to the camera, you will be prompted to install an ActiveX
component (OCX or CAB file), as in the example below.
You must install this ActiveX component (OCX or CAB file) in order to view the
Video stream in Internet Explorer.
Click the "Yes" button to install the ActiveX component.
Figure 14: ActiveX OCX Prompt
8.
Video will start playing automatically. There may be a delay of a few seconds while the
video stream is buffered.
17
Viewing Live Video
After installing the ActiveX component, you will be able to view the live video stream in its
own window, as shown below.
Figure 15: View Video Screen
There are a number of options available on this screen, accessed by select list, button or icon.
See the table below for details.
General Options
These options are always available, regardless of the type of camera you are connected to.
Resolution. Use this drop-down list to select the desired video size.
Zoom. A digital zoom feature is available. To zoom in on a section of the
window, click this icon. Then use your mouse to select the section you want
to magnify. Click the icon again to disable the zoom feature.
Snapshot. Click this to take a single JPEG "snapshot" image of the current
video.
Flip. Click this to have the image swapped top-to-bottom.
Mirror. Click this to have the image swapped left-to-right.
Audio On. This icon is displayed if audio is On. Click on the icon to turn
audio Off.
Volume. If audio is enabled, use this slider to adjust the volume.
18
Setup. Select the desired setup format from the drop-down list.
19
Chapter 4
Advanced Viewing Setup
This Chapter provides information about the optional settings and features for
viewing video via the Wireless Network Camera. This Chapter is for the
Camera Administrator only.
Introduction
This chapter describes some additional settings and options for viewing live Video:
•
Adjusting the video image
•
Controlling user access to the live video stream
•
Making video available from the Internet
•
Using the Motion Detection feature
Adjusting the Video Image
If necessary, the Wireless Network Camera Administrator can adjust the Video image.
To Adjust the Video Image:
1.
Connect to the Web-based interface of the Wireless Network Camera. (See Chapter 5 Web-based Management for details.)
2.
Select Administration, then Video Image. You will see a screen like the example below.
Figure 16: Video Image Screen
20
3.
Make the required adjustments, as explained below, and save your changes.
MPEG -4 Settings
Resolution
Video Quality
Control
Max. Frame Rate
Select the desired video resolution format. The default resolution is
set to 320*240.
•
Constant Bit Rate: Select the desired bit rate. The default is set
to 1.2 Mbps.
•
Fixed Quality: Select the desired option. The default fix quality
is set to Normal.
Select the desired Maximum bandwidth for the video stream. Note
that you can specify EITHER the Bandwidth OR the Frame Rate,
not both. If the Bandwidth is defined, the frame rate will be adjusted
as necessary to achieve the specified frame rate.
The default values for bandwidth is Unlimited, which allows you to
specify the desired frame rate.
MJPEG Settings
Resolution
Select the desired video resolution format. The default resolution is
set to 320*240.
Fixed Video
Quality
Select the desired fix quality. The default fix quality is set to
Normal.
Max. Frame Rate
Select the desired Maximum bandwidth for the video stream. Note
that you can specify EITHER the Bandwidth OR the Frame Rate,
not both. If the Bandwidth is defined, the frame rate will be adjusted
as necessary to achieve the specified frame rate.
The default value for bandwidth is Unlimited, which allows you to
specify the desired frame rate.
Mobil Settings
Enable Mobil
Streaming
Enable streaming video for the mobile device by checking this
checkbox.
Resolution
The default resolution is set to 160x120.
Video Quality
Control
•
Constant Bit Rate: Select the desired fix bit rate.
•
Fixed Quality: Select the desired option. The default fix quality
is set to Normal.
Max. Frame Rate
Select the desired Maximum bandwidth for the video stream.
Access Code
Enter the code for accessing the live video from camera through cell
phone connection.
Video Adjustment
Power Line
Frequency
Select the power line frequency (50Hz or 60Hz) used in your region,
to improve the picture quality under florescent lighting.
White Balance
Select the desired option to match the current environment and
lighting.
Brightness
If necessary, you can adjust the brightness to obtain a better image.
For example, if the camera is facing a bright light, the image may be
too dark. In this case, you can increase the brightness.
21
Sharpness
Select the desired option for the sharpness. You can select a
Sharpness value between -3 and 3.
Options
Microphone
Enable audio by checking this checkbox. Using Audio will increase
the bandwidth requirements slightly.
Time Stamp
If enabled, the current time will be displayed on the Video image.
Text Display
Enable this setting if you want text to be displayed on the Video
image, and enter the desired text - up to 20 characters. This feature
is often used to identify each camera when multiple cameras are
installed.
22
Controlling User Access to the Video Stream
By default, anyone can connect to the Wireless Network Camera and view live Video at any
time.
If desired, you can limit access to scheduled times, and also restrict access to known users.
To Control User Access to L ive Video:
1.
Connect to the Web-based interface of the Wireless Network Camera. (See Chapter 5 Web-based Management for details.)
2.
3.
Select Administration, then Video Access.
Set the desired options for Access.
Access
If the Video Access is disabled, users cannot connect using either their Web Browser or the
Windows utility. However, viewing video is still possible by logging in as the Administrator.
Figure 17: Controlling User Access
See Chapter 5 - Web-based Management for further details about using the Video Access and
User Database screens.
23
Making Video available from the Internet
If your LAN is connected to the Internet, typically by a Broadband Gateway/Router and
Broadband modem, you can make the Wireless Network Camera available via the Internet.
You will need to configure your Router or Gateway to allow connections from the Internet to
the camera.
Router/Gateway Setup
Your Router or Gateway must be configured to pass incoming TCP (HTTP) connections (from
Internet Viewers) to the Wireless Network Camera. The Router/Gateway uses the Port Number
to determine which incoming connections are intended for the Wireless Network Camera.
This feature is normally called Port Forwarding or Virtual Servers, and is illustrated below.
The Port Forwarding/Virtual Server entry tells the Router/Gateway that incoming TCP
connections on port 1024 should be passed to the Wireless Network Camera. If necessary,
check the user manual for your Router/Gateway for further details.
Figure 18: Connecting via the Internet
The "Port" for the Port Forwarding / Virtual Server entry
above is the " Secondary Port" number specified on the
Network screen of the Wireless Network Camera.
24
Wireless Network Camera Setup
The Wireless Network Camera configuration does NOT have be changed, unless:
•
You wish to change the port number from the default value (1024).
•
You wish to use the DDNS (Dynamic DNS) feature of the Wireless Network Camera.
HTTP Port Configuration
Normally, HTTP (Web) connections use port 80. Since the Wireless Network Camera uses
HTTP, but port 80 is likely to be used by a Web Server, you can use a different port for the
Wireless Network Camera. This port is called the Secondary Port.
The default Secondary Port is 1024. If you prefer to use a different port number, you can
specify the port number on the Wireless Network Camera's Network screen, as shown below.
Figure 19: Network Screen
See Chapter 5 - Web-based Management for further details on using the Network screen.
Viewers need to know this port number in order to connect
and view live Video, so you must inform viewers of the
correct port number.
DDNS (Dynamic DNS)
Many internet connections use a "Dynamic IP address", where the Internet IP address is
allocated whenever the Internet connection is established.
This means that other Internet users don't know the IP address, so can't establish a connection.
DDNS is designed to solve this problem, by allowing users to connect to your LAN using a
domain name, rather than an IP address.
To use DDNS:
1.
2.
Register for the DDNS service with a supported DDNS service provider. You can then
apply for, and be allocated, a Domain Name.
Enter and save the correct DDNS settings on the DDNS screen of the Wireless Network
Camera.
25
Figure 20: DDNS Screen
3.
Operation is then automatic:
•
The Wireless Network Camera will automatically contact the DDNS server whenever
it detects that the Internet IP address has changed, and inform the DDNS server of the
new IP address.
•
Internet users can then connect to the camera using the Domain Name allocated by the
DDNS service provider.
Viewing Live Video via the Internet
Clients (viewers) will also need a broadband connection; dial-up connections are NOT
recommended.
Viewing Live Video Using your Web Browser
If using your Web browser, you need to know the Internet IP address (or the Domain name) of
the camera's Router/Gateway, and the correct port number.
Enter the Internet address of the Router/Gateway, and its port number, in the Address (or
Location) field of your Browser.
Example - IP address:
HTTP://203.70.212.52:1024
Where the Router/Gateway's Internet IP address is 203.70.212.52 and the "Secondary
Port" number on the Wireless Network Camera is 1024.
Example - Domain Name:
HTTP://mycamera.dyndns.tv:1024
26
Where the Router/Gateway's Domain name is mycamera.dyndns.tv and the "Secondary
Port" number on the Wireless Network Camera is 1024.
Viewing Live Video with the Viewing/Recording Utility
If using the Windows Viewing/Recording Utility, the details of the Wireless Network Camera
must be entered on the Camera Setup screen.
Figure 21: Add Camera from Internet
See Chapter 6 - Window Viewing/Recording Utility for full details on using the Windows
Viewing/Recording utility.
27
Motion Detection Alerts
The Motion Detection feature can generate an Alert when motion is detected.
The Wireless Network Camera will compare consecutive frames to detect changes caused by
the movement of large objects.
But the motion detector can also be triggered by:
•
Sudden changes in the level of available light
•
Movement of the camera itself.
Try to avoid these situations. The motion detection feature works best in locations where there
is good steady illumination, and the camera is mounted securely. It cannot be used outdoors
due to the sensitivity of the CMOS sensor.
To Use Motion Detection Alerts
Using the Web-based interface on the Wireless Network Camera, select the Motion Detection
screen, then configure this screen as described below.
Figure 22: Motion Detection
1.
Enable the Motion Detection feature.
2.
3.
Set the area or areas of the video image to be examined for movement. You can define up
to 4 areas, and set the motion threshold individually for each area.
If using a schedule, define the desired schedule in Event Trigger screen.
4.
5.
Save your changes.
Select the E-Mail screen to have alerts sent by E-mail:
•
Enable and enter at least one (1) E-mail address
•
Select or enter the desired options for Video Attachment, Show "From" as and Subject
fields.
28
•
Enter details of the SMTP Server used to send the E-mail.
If the Motion Detection feature is enabled, but E-Mail is not
enabled, then the only action when motion is detected is to
log this event in the system log.
29
Chapter 5
Web-based Management
This Chapter provides Setup details of the Wireless Network Camera’s Webbased Interface. This Chapter is for the Camera Administrator only.
Introduction
The Wireless Network Camera can be configured using your Web Browser. The Wireless
Network Camera must have an IP address which is compatible with your PC.
The recommended method to ensure this is to use the supplied Windows-based Wizard, as
described in Chapter 2 - Basic Setup.
Connecting to Wireless Network Camera
•
If you have run the Windows-based setup Wizard, the final screen provided a button Web
UI. Clicking this button will immediately connect to the Wireless Network Camera, using
your Web Browser.
•
If using only your Web Browser, use the following procedure to establish a connection
from your PC to the Wireless Network Camera:
•
Once connected, you can add the Wireless Network Camera to your Browser's Favorites
or Bookmarks.
Connecting using your Web Browser
1.
Use the Windows utility to get the IP address of the Wireless Network Camera.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the Wireless Network Camera.
4. You will then be prompted for a username and password.
•
If using the default values, enter administrator for the name, and leave the
password blank.
•
Otherwise, enter the Administrator ID and Administrator Password set on the
Maintenance screen.
30
Welcome Screen
When you connect, the following screen will be displayed.
Figure 23: Welcome Screen
The menu options available from this screen are:
•
View Video - View live Video using your Web Browser. See Chapter 3 - Viewing Live
Video for details.
•
Administration - Access the Administration menu.
31
Administration Menu
Clicking on Administration on the menu provides access to all the settings for the Wireless
Network Camera.
The Administration menu contains the following options:
Setup
•
System
•
Network
•
Wireless
•
DDNS
Video Stream
•
Video Image
•
Video Access
•
User Database
Event
•
Motion Detection
•
E-Mail
•
FTP
•
HTTP
•
Event Trigger
Administration
•
Maintenance
•
Status
•
Log
32
System Screen
After clicking Administration on the main menu, or selecting System on the Administration
menu, you will see a screen like the example below.
Figure 24: System Screen
Data - System Screen
System Settings
Device ID
This displays the name for the Wireless Network Camera.
Description
This field is used for entering a description, such as the location of the
Wireless Network Camera.
Date & Time
Date For mat
Select the desired date format, it will also be used to display the date
and time as an overlay on the video image.
The abbreviations used to predefine the date formats are list as follows:
Current
Date & Time
•
YYYY-MM-DD = Year-Month-Day, e.g. 2006-01-31
•
MM/DD/YYYY = Month/Day/Year, e.g. 01/31/2006
•
DD/MM/YYYY = Day/Month/Year, e.g. 31/01/2006
This displays the current date and time on the camera.
If it's not correct, click the Change button to modify the date/time
settings. This button will open a sub-screen where you have 2 options:
•
Set the camera's date and time to match your PC.
•
Enter the correct date and time.
33
Time Zone
Choose the Time Zone for your location from the drop-down list.
If your location is currently using Daylight Saving, enable the Adjust
for daylight saving checkbox.
You must UNCHECK this checkbox when Daylight Saving
finishes.
Network Time
Protocol
Enable or disable the Time Server feature as required.
NTP Server
Address
Enter the address for the desired NTP server.
Update
The Schedule determines how often the Wireless Network Camera
contacts the NTP Server.
Select the desired options.
LED Operation
Enable this if you want to use this function.
If Enabled, the Wireless Network Camera will contact a Network Time
Server at regular intervals and update its internal timer.
34
Network Screen
This screen is displayed when the Network menu option is clicked.
Figure 25: Network Screen
Data - Network Screen
Network
Obtain an IP
Address
Automatically
If selected, the Wireless Network Camera will obtain its IP address
and related information from a DHCP Server. Only select this
option if your LAN has a DHCP Server.
Use the following IP
Address
If selected, you must assign the following data to the Wireless
Network Camera.
Obtain DNS server
address
automatically
•
IP Address - Enter an unused IP address from the address
range used on your LAN.
•
Subnet Mask - Use the same value as PCs on your LAN.
•
Default Gateway - Use the same value as PCs on your LAN.
If selected, the Wireless Network Camera will use the DNS address
or addresses provided by the DHPC server.
This option is only available if the IP address setting is Obtain an
IP address Automatically.
35
Use the following
DNS server address
Primary DNS server - Use the same value as PCs on your LAN.
Normally, your ISP will provide this address.
Secondary DNS server - This is optional. If entered, this DNS will
be used if the Primary DNS does not respond.
Secondary Port
This sets the port number for HTTP (Web) connections to the
Camera, whether for administration or viewing video.
If enabled, you can connect using either port 80 or the Secondary
port. You must enter the Secondary port number (between 1024 to
65535) in the field provided.
Note that when using a port number which is not 80, you must
specify the port number in the URL. For example, if the Camera's
IP address was 192.168.1.100 and the Secondary port was 1024,
you would specify the URL for the Camera as follows:
http://192.168.1.100:1024
RTP/RTSP
The RTSP (Real Time Streaming Protocol), a standard for
connected client(s) to control streaming data (MPEG-4) over the
World Wide Web. Enter the RTSP Port number (between 1024 and
65535) in the field provided. The default RTSP Port is 554.
The RTP (Real Time Transport Protocol), an Internet protocol for
transmitting real-time data such as audio and video.
Max RTP Data Packet field will let users limit the size of the file.
Enter the desired value between 400 and 1400.
Video Address
Enter the address of video.
Video Port
Enter the desired value (between 1024 to 65534) in the field
provided. The number you entered must be even values.
Audio Address
Enter the address of the audio.
Audio Port
Enter the desired value (between 1024 to 65534) in the field
provided. The number you entered must be even values.
Time to Live
Enter the desired length of time, if the packets fail to be delivered
to their destination within. The Time to Live you entered must be
in-between 1 to 255.
UPnP
Enable Discovery
If enabled, the Network Camera will broadcast its availability
through UPnP. UPnP compatible systems such as Windows XP will
then be able to detect the presence of the Network Camera.
Enable Traversal
If enabled, HTTP connections (from your Web Browser or the
Vie wer and Recorder utility) can use secondary port instead of port
80 (the standard HTTP port) to access the camera.
QoS
Enable QoS Mode
If enabled, the throughput level (for Video and Audio) is
guaranteed through QoS (Quality of Service).
36
Wireless Screen
This screen is displayed when the Wireless menu option is clicked.
Figure 26: Wireless Screen
Data - Wireless Screen
Wireless Network
Network Type
This determines the type of wireless communication used by the
Wireless Network Camera.
•
If you have an Access Point, select Infrastructure.
•
Otherwise, select Ad-hoc.
SSID
This must match the value used by other devices on your wireless
LAN.
Note! The SSID is case sensitive.
Domain
Select your region from the drop-down list.
Channel No.
•
In Infrastructure mode, this setting is ignored. The Wireless
Network Camera will use the Channel set on the Access Point.
•
For Ad-hoc mode, select the Channel you wish to use on your
Wireless Network Camera. Other Wireless stations should use
the same setting.
•
If you experience interference (shown by lost connections
and/or slow data transfers) you may need to experiment with
different channels to see which one is the best.
37
Security
Security System
Select the desired option, and then enter the settings for the selected
method:
•
Disabled - No security is used. Anyone using the correct SSID
can connect to your network.
•
WEP - The 802.11b standard. Data is encrypted before
transmission, but the encryption system is not very strong.
•
WPA/WPA2 Personal - Like WEP, data is encrypted before
transmission. WPA is more secure than WEP, and should be
used if possible. WPA Personal is the version of WPA which
does NOT require a Radius Server on your LAN.
WEP
Authentication Type
Normally this can be left at the default value of "Automatic." If that
fails, select the appropriate value - "Open System" or "Shared
Key." Check your wireless card's documentation to see what
method to use.
Note: In Infrastructure mode, either setting will normally work,
since most Access Points can use both methods.
WEP Encryption
Select the WEP Encryption level:
Passphrase
WEP Keys
•
64-bit (sometimes called 40-bit) encryption
•
128-bit encryption
Enter a word or group of printable characters in the Passphrase box
and click the "Generate Key" button to automatically configure the
WEP Key(s). If encryption strength is set to 64-bit, then each of the
four key fields will be populated with key values. If encryption
strength is set to 128-bit, then only the selected WEP key field will
be given a key value.
•
Use the radio buttons to select the default key.
•
Enter the key value you wish to use. Other stations must have
the same key values.
•
Keys must be entered in Hex. Hex characters are the digits (0 ~
9) and the letters A ~ F.
•
Click Clear Keys to set the Keys to be blank.
WPA/WPA2 Personal
Shared Key
Enter the key value. Data is encrypted using a key derived from the
network key. Other Wireless Stations must use the same network
key. The PSK must be from 8 to 63 characters in length.
38
DDNS Screen
Many internet connections use a "Dynamic IP address", where the Internet IP address is
allocated whenever the Internet connection is established.
This means that other Internet users don't know the IP address, so can't establish a connection.
DDNS is designed to solve this problem, as follows:
• You must register for the DDNS service with a DDNS service provider. The DDNS
Service provider will allocate a Domain Name to you upon request.
• The DDNS settings on the DDNS screen above must be correct.
•
The Wireless Network Camera will then contact the DDNS server whenever it detects that
the Internet IP address has changed, and inform the DDNS server of the new IP address.
(The Check WAN IP Address determines how often the Wireless Network Camera checks
if the Internet IP address has changed.)
This system allows other internet users to connect to you using the Domain Name allocated by
the DDNS service provider.
This screen is displayed when the DDNS menu option is clicked.
Figure 27: DDNS Screen
Data - DDNS Screen
DDNS
Enable DDNS
Enable or disable the DDNS function, as required.
Only enable this feature if you have registered for the DDNS
Service with a DDNS Server provider.
Service Provider
Choose a service provider from the list.
39
Web Site Button
Click this button to open a new window and connect to the Web
site for the selected DDNS service provider.
Domain (Host)
Name
Enter the Domain Name (Host Name) allocated to you by the
DDNS Server provider.
Account/E-Mail
Enter the login name for the DDNS account.
Password/Key
Enter the password for the DDNS account.
Check WAN IP
Address
Set the schedule for checking if the Internet IP address has
changed. If the IP address has changed, the DDNS Server will be
notified.
NOTE: If the DDNS Service provided some software to perform
this IP address update or notification, you should NOT use this
software. The update is performed by the camera.
40
Video Image Screen
This screen is displayed when the Video Image menu option is clicked.
Figure 28: Video Image Screen
Data - Video Image Screen
MPEG -4 Settings
Resolution
Video Quality
Control
Select the desired video resolution format. The default resolution is
set to 320*240.
•
Constant Bit Rate: Select the desired bit rate. The default is set
to 1.2 Mbps.
•
Fixed Quality: Select the desired option. The default fix quality
is set to Normal.
41
Max. Frame Rate
Select the desired Maximum bandwidth for the video stream. Note
that you can specify EITHER the Bandwidth OR the Frame Rate,
not both. If the Bandwidth is defined, the frame rate will be adjusted
as necessary to achieve the specified frame rate.
The default value for bandwidth is Unlimited, which allows you to
specify the desired frame rate.
MJPEG Settings
Resolution
Select the desired video resolution format. The default resolution is
set to 320*240.
Fixed Video
Quality
Select the desired fix quality. The default fix quality is set to
Normal.
Max. Frame Rate
Select the desired Maximum bandwidth for the video stream. Note
that you can specify EITHER the Bandwidth OR the Frame Rate,
not both. If the Bandwidth is defined, the frame rate will be adjusted
as necessary to achieve the specified frame rate.
The default values for bandwidth is Unlimited, which allows you to
specify the desired frame rate.
Mobil Settings
Enable Mobil
Streaming
Enable streaming video for the mobile device by checking this
checkbox.
Resolution
The default resolution is set to 160x120.
Video Quality
Control
•
Constant Bit Rate: Select the desired fix bit rate.
•
Fixed Quality: Select the desired option. The default fix quality
is set to Normal.
Max. Frame Rate
Select the desired Maximum bandwidth for the video stream.
Access Code
Enter the code for accessing the live video from camera through cell
phone connection.
Video Adjustment
Power Line
Frequency
Select the power line frequency (50Hz or 60Hz) used in your region,
to improve the picture quality under florescent lighting.
White Balance
Select the desired option to match the current environment and
lighting.
Brightness
If necessary, you can adjust the brightness to obtain a better image.
For example, if the camera is facing a bright light, the image may be
too dark. In this case, you can increase the brightness.
Sharpness
Select the desired option for the sharpness. You can select a
Sharpness value between -3 and 3.
Options
Microphone
Enable audio by checking this checkbox. Using Audio will increase
the bandwidth requirements slightly.
Time Stamp
If enabled, the current time will be displayed on the Video image.
42
Text Display
Enable this setting if you want text to be displayed on the Video
image, and enter the desired text - up to 20 characters. This feature
is often used to identify each camera when multiple cameras are
installed.
43
Video Access Screen
This screen is displayed when the Video Access option on the Administration menu is clicked.
Figure 29: Video Access Screen
Data - Video Access Screen
User Access
Enable Security
Checking
•
If disabled - No login required, users do not have to provide a
username and password when they connect to the camera to
view video.
•
If enabled - Require login, users will be prompted for a
username and password when they connect to the camera to
view video. The camera administrator must use the "User
Database" menu option to create the desired users.
•
If enabled - Camera is available during the scheduled periods,
and unavailable at other times. If this option is selected, you
need to define a schedule. If no schedule is defined, this option
is always disabled.
•
If disabled – The option will remain disabled until you enable it.
Video Access
Enable Scheduled
Video Access
Note that regardless of which setting is chosen, the Administrator
can ALWAYS access the camera and view live video.
Access Schedule
Scheduled Periods
This displays all periods you have entered into the database. If you
have not entered any periods, this list will be empty.
44
Delete
Use the Delete button to delete the selected item in the list.
Add Period
Day
Choose the desired option for the period.
Start Time
Enter the start time using a 24 hr clock.
End Time
Enter the end time using a 24 hr clock.
Add
Click this button to add a new period.
45
User Database Screen
This screen is displayed when the User Database option on the Administration menu is clicked.
Figure 30: User Database Screen
Data - User Database Screen
Existing Users
User List
This displays all users you have entered into the User database. If
you have not entered any users, this list will be empty.
Edit, Delete, Delete
All
Use these buttons to manage the user database.
User Properties
User Name
Enter the name for the user here.
•
Spaces, punctuation, and special characters must NOT be used
in the name.
•
The name is case insensitive (case is ignored), so you can not
have 2 names which differ only by case.
User Password
The password for this user.
Confirm Password
Re-enter the password for the user, to ensure it is correct.
Add Button
Click this button to add a new user, using the data shown on screen.
Clear Button
Use this button to clear the input fields, ready to add a new user.
46
Motion Detection Screen
This screen is displayed when the Motion Detection option on the Event menu is clicked.
Figure 31: Motion Detection Screen
Data - Motion Detection Screen
Motion Detection
Set Detection Areas
You can set the full screen or areas of the video image to be
examined.
Note: Motion detection can be triggered by rapid changes in
lighting condition, as well as by moving objects. For this reason, it
should only be used indoors.
Threshold
Adjust the threshold of detection for each area.
47
E-Mail Screen
This screen is displayed when the E-Mail option on the Event menu is clicked.
Figure 32: E-Mail Screen
Data - E-Mail Screen
Primary/Secondary SMTP Server
SMTP Server
Address
Enter the address of the SMTP (Simple Mail Transport Protocol)
Server to be used to send E-Mail.
Authentication
Select the desired Authentication type for the SMTP Server.
SMTP Login name
Enter your login name for the SMTP Server.
SMTP Password
Enter your password for the SMTP Server.
POP server name
Enter the name for the POP Server.
Secondary SMTP
Check the box to upload to the Secondary SMTP if the camera can
not connect to the primary SMTP.
E-Mail Setup
E-mail Address
Enter at least one (1) E-Mail address; the 2nd and 3rd addresses are
optional. The E-Mail alert will be sent to the E-Mail address or
addresses specified here.
48
Subject
Enter the desired text to be shown as the "Subject" for the E-Mail
when it is received. Subject can not exceed 48 alphanumeric
characters.
Show "From" as
Enter the E-Mail address to be shown in the "From" field when the
E-Mail is received.
49
FTP Screen
This screen is displayed when the FTP option on the Event menu is clicked.
Figure 33: FTP Screen
Data - FTP Screen
Primary/Secondary FTP
FTP Server
Enter the address of the FTP Server.
Port
Enter the Port of the FTP Server to be connected.
Login name
Enter your login name for the FTP Server.
Password
Enter your password for the FTP Server.
Enable Passive
Mode
Check the box to enable the Passive mode feature of the FTP.
File Path Name
Enter the file path/name of the FTP.
Secondary FTP
Check the box to upload to the Secondary FTP if the camera can not
connect to the primary FTP.
50
HTTP Screen
This screen is displayed when the HTTP option on the Event menu is clicked.
Figure 34: HTTP Screen
Data - HTTP Screen
HTTP Notification
Enable
Enable this checkbox to use the HTTP Notification.
URL
Enter the URL of your HTTP notification server.
Proxy Server
Name
Specify the proxy server name in the provided field if the camera
needs to pass through a Proxy Server to do the HTTP notification.
Port Number
Enter the port number for the proxy server.
Method
Select the desired method of form data encoding.
•
Get - It should be used if and only if the form processing is
independent, which typically means a pure query form.
Generally it is advisable to do so.
•
Post - If there are problems related to long URLs and non-ASCII
character repertoires, which can make it necessary to use
"POST" even for independent processing.
51
Event Trigger Screen
This screen is displayed when the Event Trigger option on the Event menu is clicked.
Figure 35: Event Trigger Screen
Data - Event Trigger Screen
Event Schedule
Schedule List
The Event Schedule shows all of the event types currently
configured in the Network Camera, along with various information
about their configuration, as listed below:
•
Name - the descriptive event name set by the user.
•
Effective Time Frame - shows when the event at a set time will
be triggered.
•
Trigger by - shows what kind trigger activate the event.
•
Action - shows what kind of the actions will be issued when the
event been triggered
New Schedule
Effective Time
Frame
Choose the desired option for the period.
Start Time
Choose the desired start time using a 24 hr clock.
End Time
Choose the desired end time using a 24 hr clock.
52
Trigger Event
Motion Detection
If enabled, movement in a motion detection window can be used to
trigger events.
Interval
Select the desired option for the events interval. (* "0" = No Delay)
Actions
•
E-Mail - If checked, an E-Mail (with "Attachment") will be
delivered to the SMTP server. (SMTP Server must be
configured on the E-Mail page.)
•
FTP - If checked, an FTP upload will be activated to the FTP
server. (FTP servers must be configured on the FTP page.)
•
HTTP - If checked, an Instant Messaging (IM) will be delivered
to the Jabber server. (Jabber server must be configured on the
Instant Messaging page.)
•
JPEG Image:
Frame Rate - Select the desired capture rate for the JPEG
image(s) here.
Pre/Post Capture - Select the desired length. The snapshot(s) of
the JPEG image depends on this setting, and also the file size
and degree of compression.
•
Video:
Video Format - Select the desired type for the video file.
Pre/Post Capture - Select the desired length. The size of the file
depends on this setting, and also the Video size and degree of
compression.
Attachment Type
53
Maintenance Screen
Figure 36: Maintenance Screen
Data - Maintenance Screen
Administrator Login
Administrator
ID
Enter the name for the Administrator here.
Administrator
Password
The password for the Administrator.
Verify Password
Re-enter the password for the Administrator, to ensure it is correct.
Spaces, punctuation, and special characters must NOT be used in the
name.
Firmware Upgrade
Upgrade File
Click the "Browse" button and browse to the location on your PC
where you stored the Firmware file. Select this file.
Start
Click this button to start the Firmware. When the upgrade is finished,
the Wireless Network Camera will restart, and this management
connection will be unavailable during the restart.
Clear File Name
This does NOT stop the Upgrade process if it has started. It only clears
the input for the "Upgrade File" field.
54
Backup & Restore
Backup
Configuration
File
Click Backup button to save the current configuration information to a
text file.
Restore
Configuration
File
Click Restore button to reinitialize the camera to load the new updated
software. Do this after loading the upgrade file.
Clear File Name
This does NOT stop the Restore process if it has started. It only clears
the input for the "Restore Configuration File" field.
Restore Factory
Defaults
Click Defaults button to reloads all default settings on the camera.
Restart Camera
Click Restart button to restarts the camera.
55
Status Screen
Figure 37: Status Screen
Data - Status Screen
System
Device Name
This shows the name of the Wireless Network Camera.
Description
This shows the description of the Wireless Network Camera, such as
location.
F/W version
The version of the current firmware installed.
Network
MAC Address
The current IP address of the Wireless Network Camera.
IP Address
The IP Address of the Wireless Network Camera.
Network Mask
The network mask associated with the IP address above.
Gateway
The IP Address of the remote Gateway associated with the IP Address
above.
Wireless
Network Type
This shows the Network Type currently in use (Ad-hoc or
Infrastructure).
56
SSID
This displays the wireless SSID.
Channel
This shows the wireless channel currently used.
Security
The current security setting for Wireless connections.
Signal Strength
This shows the strength of the signal.
MPEG -4/MJPEG
Resolution
The image size of the video stream.
Video Quality
This displays the image quality of the video stream.
Frame Rate
This displays the frame rate of the video stream.
Buttons
Refresh
Update the log and any other data on screen.
57
Log Screen
This screen displays a log of system activity.
Figure 38: Log Screen
Data - Log Screen
Log
System Log
This is a log of system activity.
Enable Syslog
Service
Check the box to enable the System Log Server feature.
Syslog Server
Address
Enter the address of the Syslog Server.
Refresh
Button
Click this to update the data shown on screen.
Clear Log
Click this button to restart the log.
58
6
Chapter 6
Windows
Viewing/Recording Utility
This Chapter describes how to view and record the live video stream
generated by the Wireless Network Camera, using the supplied Windows
utility.
Overview
The recommended method to view video is to use the supplied Windows Viewing/Recording
utility. This utility also allows you to record the video streams, either interactively or using a
schedule.
Installation
1.
Insert the supplied CD-ROM into your drive. If the setup program does not start
automatically, run NeutralCamera.exe in the root folder. You will see the Welcome
screen shown below.
Figure 39: Welcome Screen
2.
3.
Click the Install Utility button to start the installation of the Viewing/Recording Utility.
Follow the prompts to complete the installation.
59
System Tray Icon
When started, the program will create an icon in the Windows system tray on the taskbar, as
shown below.
Figure 40: System Tray Icon
You can right click the icon and it will provides a menu which allows you to view program
details, view the main screen, or terminate the program.
Main Screen
When started, a screen like the example below will be displayed.
Figure 41: Main Screen
If no cameras have been defined, no video will be displayed. See the following section for
information on defining a camera. Note that each Camera is given a number (Channel Number).
60
Camera Setup
To define a camera and associate it with a Channel Number.
1.
Click the Setup button on the main screen. You will see a screen like the example below.
Figure 42: Camera Setup Screen
2.
Select the desired Channel number in the left (No.) column.
3.
There are 2 radio buttons, for LAN or Internet. The default is LAN. See the following
section for details of the Internet option.
•
4.
The LAN panel, on the left, displays all Wireless Network Camera found on your
LAN. This list can be updated by clicking the Refresh button.
• The Camera Data panel, on the right, displays the data for the selected camera.
To associate a camera with the current Channel:
•
Select a camera in the list on the left.
•
Enter the value of Local ID.
•
Check that the Camera Data shown on the right is correct. See below for details.
•
Click the Add button. The camera will now appear in the Channel List.
Camera Data - LAN
Local ID
This is the name you gave to this camera. This field must be entered.
Camera Name
This is the default name for the Wireless Network Camera, and cannot
be changed.
IP Address
The current IP address of the Wireless Network Camera.
61
Port Number
This will normally display "80". Only change this if requested to do so
by the Wireless Network Camera Administrator.
Login
The camera Administrator can require that users provide a username and
password before being allowed to view the live video.
•
If the Administrator has not enabled this option, the Login fields can
be left blank.
•
Otherwise, you must enter the username and password allocated to
your by Administrator.
Stream Type
Select the desired type from the drop-down list.
Setup Camera
Pages
Click this button to connect the Web-based interface of the Camera
Enable Motion
Detection
Check this if you want the Camera to have the feature enabled.
You can add the same Camera twice, once for the LAN (using
the LAN IP address), and again for the Internet (using the
Internet IP address). This will allow viewing the camera whether
you are on the same LAN as the camera or in a remote location.
Adding Cameras on the Internet
If the Wireless Network Camera you wish to add is not on your LAN, but is available via the
Internet, click the Internet button. You will see a screen like the example below.
62
Figure 43: Add Camera from Internet
To associate a camera with the current Channel:
1. Enter the Camera Data on the panel on the right. See below for details.
2.
If desired, click the Test button to check that a connection and login can be performed
successfully. Note that if the remote LAN does not currently have an Internet connection,
or the remote camera is not on-line, the test will fail because no connection is possible.
3.
Click the Add button. The camera will now appear in the Channel List.
Camera Data - Internet
Local ID
This is the name you gave to this camera. This field must be entered.
Camera Name
This is the default name for the Wireless Network Camera, and cannot
be changed.
This field will be displayed automatically once a connection to the
Wireless Network Camera has been established.
IP Address
Enter the Domain Name or Internet IP address of the desired Wireless
Network Camera.
Port Number
Enter the port number used by the Wireless Network Camera for
connections via the Internet The Camera Administrator can advise you
of the port to use. The default value is 1024.
63
Login
The camera Administrator can require that users provide a username and
password before being allowed to view the live video.
•
If the Camera Administrator has not enabled this option, the Login
fields can be left blank.
•
Otherwise, you must enter the username and password allocated to
you by the Camera Administrator.
Stream Type
Select the desired type from the drop-down list.
Setup Camera
Pages
Click this button to connect the Web-based interface of the Camera
Enable Motion
Detection
Check this if you want the Camera to have the feature enabled.
You can add the same Camera twice, once for the LAN, and
again for the Internet. This will allow viewing the camera
whether you are on the same LAN as the camera or in a remote
location.
64
Main Screen
You can view live video in the main screen. The built-in software can let you view up to 16
cameras on a single computer screen at one central location.
The Icons allow you to control the cameras and video streams.
Channel (Camera) Selection.
Use this to select the desired Channel (Camera) by clicking on the top row. This
panel also indicates the status of the camera.
•
The first column indicates if the camera is available.
Green indicates the camera is available.
Gray indicates that the camera is currently unavailable.
•
The second column indicates if a recording is in progress.
Gray indicates no recording.
Red indicates recording is in progress.
•
The third column indicates if Motion Detection is in progress.
Gray indicates this feature is not enabled.
Yellow indicates Motion Detection is in progress.
•
The forth and fifth columns indicate if I/O port 1/2 is in On or Off mode.
Gray indicates this feature is not enabled.
Yellow indicates I/O port is in On mode.
Alert Log List.
It displays the list of alert logs, if any.
Hard Disk Quota. This displays the available and used space of the disk for
storing recordings.
Setup. Click this button to open the Setup Window.
Playback. Click this button to open the Playback, which allows you to browse
through the previously saved files.
Channel Indicator. This indicates the current channel (camera).
Screen Layout. Use this to select the number of Channels (Cameras) to be
displayed on screen.
Play. Use this to re-start viewing, after using the Stop or Pause button.
Pause. Use this to temporarily stop the connection to the camera
Stop. This will terminate the connection to the camera, halting both the viewing
and the recording (if in progress).
Record. Click this to start recording the current video stream.
While recording, this button will be blue. To stop recording, click the Stop
button.
Snapshot. Click this to take a single JPEG "snapshot" image of the current
video.
65
Zoom Camera. A digital zoom feature is available. To zoom in on a section of
the window, click this icon. Then use your mouse to select the section you want
to magnify. Click the icon again to disable the zoom feature.
Flip Video. Click this to have the image swapped top-to-bottom.
Mirror Video. Click this to have the image swapped left-to-right.
Direct Pan/Tilt. Use this to move the camera to the Pan/Tilt position directly.
Sound On/Off. One of these icons will be displayed.
This can be used to select the Audio stream which can be heard. (Only one audio
stream can be selected at any time.) If the camera does not support audio, or if
audio is disabled on the camera, this option is unavailable.
Microphone On/Off. - For Cameras that feature audio, click this to enable the
microphone.
Speaker Volume - For Cameras that feature audio, click this bar and move its
endpoint to raise or lower the volume.
Port 1. Click the buttons to set the I/O port 1 to ON or OFF mode.
Port 2. Click the buttons to set the I/O port 2 to ON or OFF mode.
66
Recording Video
You can record Video while watching, or schedule recordings to occur when you are absent.
Recordings are stored in a standard Microsoft ASF file format, and can be played using
Microsoft Media Player.
Before doing any recording, you should review the recording settings to ensure they are
suitable for your PC.
Recording Schedule
To set the Recording Preferences, click the Recording Schedule tab on the Setup screen. You
will see a screen like the example below.
Figure 44: Recording Schedule
If necessary, change these settings to suit your environment.
Local ID. This is the name you gave to this camera. This field must be entered.
Interval. Decide which days you want the Camera to record. Select the appropriate Interval
from the drop-down list.
Start Date. Select the date you want the recording begin.
Start Time. Select the time you want the recording begin.
Duration. Select how ling you want the recording to be.
After you have made your selections, click the Add button to save the new scheduled
recording, and you will see it appears in the recording list.
67
Preferences
This screen is displayed after clicking the Preferences tab on the Setup screen. If necessary,
change these settings to suit your environment.
Figure 45: Preferences Screen
Data - Preferences
Recording Paths
Recording
This is the Drive and Folder on your PC where recorded files
will be placed. You need a drive which has large amounts
(Gigabytes) of free space. Click the Browse button to select the
drive and folder.
Note that file names are automatically assigned, using the date
and time.
Instant Recording Time Limit
Maximum time limit
for Instant Recording
This sets the maximum size of a recording which is started by
clicking the Record button on the main screen.
If the recording is not stopped manually, it will be terminated
after the time period indicated here.
Motion Detection
Record before Motion
Detected
Set the time so the Utility will start recording the certain time
before the Utility detects motion in a Camera's field of view.
68
Record after Motion
Detected
Set the time so the Utility will stop recording the certain time
after the Utility detects motion in a Camera's field of view.
Disk Allocation for Each Camera Recording
Total Disk Space
This displays the total size of the disk selected for storing
recordings.
Available Disk Space
This displays the available space of the disk selected for storing
recordings.
Enable Disk space
limitation
Enable this if you wish to limit the disk space used by video
recordings.
Maximum Allowed
Space
Enter the maximum amount of disk space which can be used for
video recordings.
When allowed space
is full.
Select the desired option for the behavior when the disk space
limit is reached.
•
Overwrite earliest file. The utility will overwrite the old
files if the space is not enough for recording.
•
Stop Recording. If the disk space limit is reached, no
further recording is done.
Initial Settings
Launch this utility
when Windows started
Check this to have this utility start when Windows starts.
Proxy Server
Enable proxy
If enabled, click the Proxy Settings button to configure the
settings.
69
Using Playback
To access the saved files of the Camera, click Playback button in the Main screen, then you
will see the following screen.
Figure 46: Playback Screen
Searching Recorded Video Files
Load other Cameras. Click this button to load other cameras from the network.
Select Camera. Select the desired camera from the list.
Recording Methods. Select the type of the recorded file from the drop-down list that you wish
to view.
Start Date/Time. The date and time the recording will be made.
End Date/Time. The date and time the recording will be ended.
Submit. Click this button then it will display the list of files according to the search criteria.
Play. Use this to re-start viewing, after using the Stop or Pause button.
Pause. Use this to temporarily stop the connection to the camera
Frame by Frame. Playback the video in a frame -frame basis by clicking the mouse button.
Stop. This will terminate the connection to the camera, halting both the viewing and the
recording (if in progress).
Snapshot. Click this to take a single JPEG "snapshot" image of the current video.
Zoom In. To zoom in on a section of the window, click this icon.
Zoom Out. To zoom out on a section of the window, click this icon.
70
Print. Click this to print the current video stream.
Playback Speed. To play a recorded file, select the desired speed.
Audio Control. To play a recorded file, select the desired volume.
Hard Disk Quota. This displays the available and used space of the disk for storing recordings.
Convert to AVI. Select the file and click this button to convert the file to AVI format.
Delete Video. To delete a recorded file, select the file and click this button.
71
Chapter 7
Troubleshooting
This chapter covers the most likely problems and their solutions.
Overview
This chapter covers some common problems that may be encountered while using the Wireless
Network Camera and some possible solutions to them. If you follow the suggested steps and
the Wireless Network Camera still does not function properly, contact your dealer for further
advice.
Problems
Problem 1:
I can't connect to the Wireless Network Camera with my Web
Browser to configure it.
Solution 1:
It is possible that your PC's IP address is not compatible with the IP
address of the Wireless Network Camera.
Use the Windows utility to configure the Wireless Network Camera with a
valid IP address.
Problem 2:
The Windows utility doesn't list any Wireless Network Cameras.
Solution 2:
Check the following:
•
The Wireless Network Camera is installed, LAN connections are OK,
it is powered ON and startup is complete.
•
Ensure that your PC and the Wireless Network Camera are on the
same network segment. (If you don't have a router, this must be the
case.)
•
Ensure that your PC has the TCP/IP network protocol loaded. In
Windows, this is done by using Control Panel-Network .
•
If an entry for TCP/IP -> Network card is not listed, use Add Protocol - Microsoft - TCP/IP to add it.
•
You then need to select the new entry (TCP/IP -> Network card),
click Properties, and configure the IP Address tab.
•
If your LAN has a DHCP Server, you can select "Obtain an IP
Address automatically". Otherwise, you must select "Specify an
IP Address", and enter values for IP Address, Subnet Mask , and
Gateway. All devices on your LAN must use compatible values.
Remember that each device needs a unique IP Address, and the
same Subnet Mask.
Problem 3
When I try to connect to the Wireless Network Camera, I get
prompted for a user name and password.
Solution 3
You SHOULD be prompted for a user name and password if trying to
access the Administration menu.
Enter the Administrator ID and Password set on the Maintenance screen.
72
If you are just trying to view Video, the User Name/Password prompt
indicates that the Administrator has restricted access to specified users.
Ask the Administrator for your User Name and Password.
Problem 4
I can't connect to the Wireless Network Camera using a Wireless
connection.
Solution 4
1) If a LAN cable is connected to the LAN port, the Wireless interface is
disabled. Only one interface can be active.
2) Check that your PC and the Wireless Network Camera have compatible
Wireless settings.
•
Mode (Infrastructure or Ad-hoc) must be correct.
•
ESSID must match.
•
WEP settings must match.
•
In Ad-hoc mode, the Channel should match, although this is often not
required.
Problem 5
Video quality may suddenly deteriorate.
Solution 5
This can happen when an additional viewer connects to the Wireless
Network Camera, overloading the camera or the available bandwidth. The
image size and quality can be adjusted to cater for the required number of
viewers and the available bandwidth.
Problem 6
The motion detection feature doesn't send me any E-Mails.
Solution 6
It may be that the SMTP (Simple Mail Transport Protocol) server used by
the camera to send the E-Mail will not accept mail. (This is to prevent span
being sent from the server.). Try using a different SMTP server, or contact
your ISP to see if SMTP access is being blocked.
Problem 7
Using the motion detection feature, I receive E-Mails which don't show
any moving objects.
Solution 7
The motion detection feature doesn't actually detect motion. It compares
frames to see if they are different. Major differences between frames are
assumed to be caused by moving objects.
But the motion detector can also be triggered by:
•
Sudden changes in the level of available light
•
Movement of the camera itself.
Try to avoid these situations. The motion detection feature works best in
locations where there is good steady illumination, and the camera is
mounted securely. This feature can NOT be used if the camera is outdoors.
Problem 8
The image is blurry.
Solution 8
Try cleaning the lens, or adjusting the Video Quality Control setting on the
Video Image screen. Video created will the lower settings will contain less
detail; this is the trade-off for using less bandwidth.
73
Appendix A
Specifications
Wireless Network Camera
Model
Wireless Network Camera
Dimensions
90mm (W) * 35mm (H) * 90mm (D)
Operating Temperature
0° C to 40° C
Storage Temperature
-20° C to 70° C
Network Protocols:
TCP/IP, DHCP, SMTP, NTP, HTTP, FTP, NTP, RTP, RTSP,
UPnP (Discovery only)
Network Interface:
1 Ethernet 10/100BaseT (RJ45) LAN connection
Wireless interface
IEEE 802.11b/802.11g compatible, Infrastructure/Ad-hoc mo de,
WEP/WPA/WPA2 security support, roaming support
LEDs
Power Adapter
5V DC External
Regulatory Approvals
CE Approvals
The Wireless Network Camera and the Ethernet Network Camera meet the guidelines of the
European Union and comply with the 99/5/EEC and RTTE 99/5EG directives, including the
following standards:
•
EN60950
•
EN300 328-2
•
EN301 489-1
•
EN301 489-17
This is a Class B product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
74
Copyright Notice
Many software components are covered by the GNU GPL (General Public License). Some are
covered by other Licenses as listed in the table below.
Details of each applicable license are contained in the following section.
No Warranty
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
Network Camera copyright information
Package source codes
License
bootloader
GPL
arm-linux 2.6.5
GPL
arm-linux-gcc 3.4.1 library
LGPL
DM9000 lan driver
GPL
Busy-box
GPL
boa-0.94.13a
GPL
ez-ipupdate
GPL
dhcpd-1.3.22
GPL
boa-0.94-13e11
GPL
WPA_supplicant
GPL
cron
ntp-4.1.71
libupnp-1.2.1
Public domain (BSD & Lineo
http://www.lineo.com/)
Public domain
(http://www.ntp.org/)
Intel
(http://upnp.sourceforge.net/)
75
ntp-4.1.71 license
Copyright (c) David L. Mills 1992-2001
Permission to use, copy, modify, and distribute this software and its documentation for any
purpose and without fee is hereby granted, provided that the above copyright notice appears in
all copies and that both the copyright notice and this permission notice appear in supporting
documentation, and that the name University of Delaware not be used in advertising or
publicity pertaining to distribution of the software without specific, written prior permission.
The University of Delaware makes no representations about the suitability this software for any
purpose. It is provided "as is" without express or implied warranty.
Libupnp-1.2.1 License
Copyright (c) 2000 Intel Corporation. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials provided
with the distribution.
3. Neither name of Intel Corporation nor the names of its contributors may be used to endorse
or promo te products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL INTEL OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
76
cron license
Copyright (c) 1989 The Regents of the University of California. All rights reserved.
This code is derived from software contributed to Berkeley by Paul Vixie.
Redistribution and use in source and binary forms are permitted provided that the above
copyright notice and this paragraph are duplicated in all such forms and that any
documentation, advertising materials, and other materials related to such distribution and use
acknowledge that the software was developed by the University of California, Berkeley. The
name of the University may not be used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED ''AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
77
GNU General Public License
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but
changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it.
By contrast, the GNU General Public License is intended to guarantee your freedom to share
and change free software--to make sure the software is free for all its users. This General
Public License applies to most of the Free Software Foundation's software and to any other
program whose authors commit to using it. (Some other Free Software Foundation software is
covered by the GNU Library General Public License instead.) You can apply it to your
programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public
Licenses are designed to make sure that you have the freedom to distribute copies of free
software (and charge for this service if you wish), that you receive source code or can get itif
you want it, that you can change the software or use pieces of it in new free programs; and that
you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights
or to ask you to surrender the rights. These restrictions translate to certain responsibilities for
you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must
give the recipients all the rights that you have. You must make sure that they, too, receive or
can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license
which gives you legal permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands
that there is no warranty for this free software. If the software is modified by someone else and
passed on, we want its recipients to know that what they have is not the original, so that any
problems introduced by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the
danger that redistributors of a free program will individually obtain patent licenses, in effect
making the program proprietary. To prevent this, we have made it clear that any patent must
be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
Terms And Conditions For Copying, Distribution And Modification
0. This License applies to any program or other work which contains a notice placed by the
copyright holder saying it may be distributed under the terms of this General Public License.
The "Program", below, refers to any such program or work, and a "work based on the
Program" means either the Program or any derivative work under copyright law: that is to say,
a work containing the Program or a portion of it, either verbatim or with modifications and/or
78
translated into another language. (Hereinafter, translation is included without limitation in the
term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered by this License;
they are outside its scope. The act of running the Program is not restricted, and the output from
the Program is covered only if its contents constitute a work based on the Program
(independent of having been made by running the Program). Whether that is true depends on
what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it,
in any medium, provided that you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to
this License and to the absence of any warranty; and give any other recipients of the Program a
copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a
work based on the Program, and copy and distribute such modifications or work under the
terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the
files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or
is derived from the Program or any part thereof, to be licensed as a whole at no charge to all
third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause
it, when started running for such interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a notice that there is no warranty
(or else, saying that you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License. (Exception: if the
Program itself is interactive but does not normally print such an announcement, your work
based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that
work are not derived from the Program, and can be reasonably considered independent and
separate works in themselves, then this License, and its terms, do not apply to those sections
when you distribute them as separate works. But when you distribute the same sections as part
of a whole which is a work based on the Program, the distribution of the whole must be on the
terms of this License, whose permissions for other licensees extend to the entire whole, and
thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written
entirely by you; rather, the intent is to exercise the right to control the distribution of derivative
or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or
with a work based on the Program) on a volume of a storage or distribution medium does not
bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object
code or executable form under the terms of Sections 1 and 2 above provided that you also do
one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must
be distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange; or,
79
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a
charge no more than your cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding
source code. (This alternative is allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such an offer, in accord with
Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to
it. For an executable work, complete source code means all the source code for all modules it
contains, plus any associated interface definition files, plus the scripts used to control
compilation and installation of the executable. However, as a special exception, the source
code distributed need not include anything that is normally distributed (in either source or
binary form) with the major components (compiler, kernel, and so on) of the operating system
on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a
designated place, then offering equivalent access to copy the source code from the same place
counts as distribution of the source code, even though third parties are not compelled to copy
the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly
provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute
the Program is void, and will automatically terminate your rights under this License. However,
parties who have received copies, or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing
else grants you permission to modify or distribute the Program or its derivative works. These
actions are prohibited by law if you do not accept this License. Therefore, by modifying or
distributing the Program (or any work based on the Program), you indicate your acceptance of
this License to do so, and all its terms and conditions for copying, distributing or modifying the
Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the
Program subject to these terms and conditions. You may not impose any further restrictions on
the recipients' exercise of the rights granted herein.You are not responsible for enforcing
compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other
reason (not limited to patent issues), conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this License, they do not excuse you
from the conditions of this License. If you cannot distribute so as to satisfy simultaneously
your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would not permit
royalty-free redistribution of the Program by all those who receive copies directly or indirectly
through you, then the only way you could satisfy both it and this License would be to refrain
entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance,
the balance of the section is intended to apply and the section as a whole is intended to apply in
other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right
claims or to contest validity of any such claims; this section has the sole purpose of protecting
the integrity of the free software distribution system, which is implemented by public license
80
practices. Many people have made generous contributions to the wide range of software
distributed through that system in reliance on consistent application of that system; it is up to
the author/donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the
rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by
patents or by copyrighted interfaces, the original copyright holder who places the Program
under this License may add an explicit geographical distribution limitation excluding those
countries, so that distribution is permitted only in or among countries not thus excluded. In
such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General
Public License from time to time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version
number of this License which applies to it and "any later version", you have the option of
following the terms and conditions either of that version or of any later version published by
the Free Software Foundation. If the Program does not specify a version number of this
License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution
conditions are different, write to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the Free Software Foundation; we
sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH
ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
81
END OF TERMS AND CONDITIONS
82
Lesser GNU General Public License
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but
changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the
GNU Library Public License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it.
By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share
and change free software--to make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software
packages--typically libraries--of the Free Software Foundation and other authors who decide to
use it. You can use it too, but we suggest you first think carefully about whether this license or
the ordinary General Public License is the better strategy to use in any particular case, based on
the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General
Public Licenses are designed to make sure that you have the freedom to distribute copies of
free software (and charge for this service if you wish); that you receive source code or can get
it if you want it; that you can change the software and use pieces of it in new free programs;
and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these
rights or to ask you to surrender these rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give
the recipients all the rights that we gave you. You must make sure that they, too, receive or
can get the source code. If you link other code with the library, you must provide complete
object files to the recipients, so that they can relink them with the library after making changes
to the library and recompiling it. And you must show them these terms so they know their
rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer
you this license, which gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free
library. Also, if the library is modified by someone else and passed on, the recipients should
know that what they have is not the original version, so that the original author's reputation will
not be affected by problems that might be introduced by others.
83
Finally, software patents pose a constant threat to the existence of any free program. We wish
to make sure that a company cannot effectively restrict the users of a free program by obtaining
a restrictive license from a patent holder. Therefore, we insist that any patent license obtained
for a version of the library must be consistent with the full freedom of use specified in this
license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public
License. This license, the GNU Lesser General Public License, applies to certain designated
libraries, and is quite different from the ordinary General Public License. We use this license
for certain libraries in order to permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the
combination of the two is legally speaking a combined work, a derivative of the original library.
The ordinary General Public License therefore permits such linking only if the entire
combination fits its criteria of freedom. The Lesser General Public License permits more lax
criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the
user's freedom than the ordinary General Public License. It also provides other free software
developers Less of an advantage over competing non-free programs. These disadvantages are
the reason we use the ordinary General Public License for many libraries. However, the Lesser
license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible
use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free
programs must be allowed to use the library. A more frequent case is that a free library does
the same job as widely used non-free libraries. In this case, there is little to gain by limiting the
free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater
number of people to use a large body of free software. For example, permission to use the
GNU C Library in non-free programs enables many more people to use the whole GNU
operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it does
ensure that the user of a program that is linked with the Library has the freedom and the
wherewithal to run that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close
attention to the difference between a "work based on the library" and a "work that uses the
library". The former contains code derived from the library, whereas the latter must be
combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License Agreement applies to any software library or other program which contains a
notice placed by the copyright holder or other authorized party saying it may be dis tributed
under the terms of this Lesser General Public License (also called "this License"). Each
licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be
conveniently linked with application programs (which use some of those functions and data) to
form executables.
84
The "Library", below, refers to any such software library or work which has been distributed
under these terms. A "work based on the Library" means either the Library or any derivative
work under copyright law: that is to say, a work containing the Library or a portion of it, either
verbatim or with modifications and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it.
For a library, complete source code means all the source code for all modules it contains, plus
any associated interface definition files, plus the scripts used to control compilation and
installation of the library.
Activities other than copying, distribution and modification are not covered by this License;
they are outside its scope. The act of running a program using the Library is not restricted, and
output from such a program is covered only if its contents constitute a work based on the
Library (independent of the use of the Library in a tool for writing it). Whether that is true
depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you
receive it, in any medium, provided that you conspicuously and appropriately publish on each
copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that
refer to this License and to the absence of any warranty; and distribute a copy of this License
along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work
based on the Library, and copy and distribute such modifications or work under the terms of
Section 1 above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the
files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under
the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an
application program that uses the facility, other than as an argument passed when the facility is
invoked, then you must make a good faith effort to ensure that, in the event an application does
not supply such function or table, the facility still operates, and performs whatever part of its
purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely
well-defined independent of the application. Therefore, Subsection 2d requires that any
application-supplied function or table used by this function must be optional: if the application
does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that
work are not derived from the Library, and can be reasonably considered independent and
separate works in themselves, then this License, and its terms, do not apply to those sections
when you distribute them as separate works. But when you distribute the same sections as part
of a whole which is a work based on the Library, the distribution of the whole must be on the
terms of this License, whose permissions for other licensees extend to the entire whole, and
thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written
entirely by you; rather, the intent is to exercise the right to control the distribution of derivative
or collective works based on the Library.
85
In addition, mere aggregation of another work not based on the Library with the Library (or
with a work based on the Library) on a volume of a storage or distribution medium does not
bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this
License to a given copy of the Library. To do this, you must alter all the notices that refer to
this License, so that they refer to the ordinary GNU General Public License, version 2, instead
of to this License. (If a newe r version than version 2 of the ordinary GNU General Public
License has appeared, then you can specify that version instead if you wish.) Do not make any
other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU
General Public License applies to all subsequent copies and derivative works made from that
copy.
This option is useful when you wish to copy part of the code of the Library into a program that
is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in
object code or executable form under the terms of Sections 1 and 2 above provided that you
accompany it with the complete corresponding machine-readable source code, which must be
distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange.
If distribution of object code is made by offering access to copy from a designated place, then
offering equivalent access to copy the source code from the same place satisfies the
requirement to distribute the source code, even though third parties are not compelled to copy
the source along with the object code.
5. A program that contains no derivative of any portion of the Library, but is designed to work
with the Library by being compiled or linked with it, is called a "work that uses the Library".
Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the
scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a
derivative of the Library (because it contains portions of the Library), rather than a "work that
uses the library". The executable is therefore covered by this License.
Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library,
the object code for the work may be a derivative work of the Library even though the source
code is not. Whether this is true is especially significant if the work can be linked without the
Library, or if the work is itself a library. The threshold for this to be true is not precisely
defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and
small macros and small inline functions (ten lines or less in length), then the use of the object
file is unrestricted, regardless of whether it is legally a derivative work. (Executables
containing this object code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the
work under the terms of Section 6. Any executables containing that work also fall under
Section 6, whether or not they are linked directly with the Library itself.
86
6. As an exception to the Sections above, you may also combine or link a "work that uses the
Library" with the Library to produce a work containing portions of the Library, and distribute
that work under terms of your choice, provided that the terms permit modification of the work
for the customer's own use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and
that the Library and its use are covered by this License. You must supply a copy of this
License. If the work during execution displays copyright notices, you must include the
copyright notice for the Library among them, as well as a reference directing the user to the
copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the
Library including whatever changes were used in the work (which must be distributed under
Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the
complete machine-readable "work that uses the Library", as object code and/or source code, so
that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of
definitions files in the Library will not necessarily be able to recompile the application to use
the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism
is one that (1) uses at run time a copy of the library already present on the user's computer
system, rather than copying library functions into the executable, and (2) will operate properly
with a modified version of the library, if the user installs one, as long as the modified version is
interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user
the materials specified in Subsection 6a, above, for a charge no more than the cost of
performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer
equivalent access to copy the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already
sent this user a copy.
For an executable, the required form of the "work that uses the Library" must include any data
and utility programs needed for reproducing the executable from it. However, as a special
exception, the materials to be distributed need not include anything that is normally distributed
(in either source or binary form) with the major components (compiler, kernel, and so on) of
the operating system on which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary
libraries that do not normally accompany the operating system. Such a contradiction means
you cannot use both them and the Library together in an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single
library together with other library facilities not covered by this License, and distribute such a
combined library, provided that the separate distribution of the work based on the Library and
of the other library facilities is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library,
uncombined with any other library facilities. This must be distributed under the terms of the
Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on
the Library, and explaining where to find the accompanying uncombined form of the same
work.
87
8. You may not copy, modify, sublicense, link with, or distribute the Library except as
expressly provided under this License. Any attempt otherwise to copy, modify, sublicense,
link with, or distribute the Library is void, and will automatically terminate your rights under
this License. However, parties who have received copies, or rights, from you under this
License will not have their licenses terminated so long as such parties remain in full
compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing
else grants you permission to modify or distribute the Library or its derivative works. These
actions are prohibited by law if you do not accept this License. Therefore, by modifying or
distributing the Library (or any work based on the Library), you indicate your acceptance of
this License to do so, and all its terms and conditions for copying, distributing or modifying the
Library or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient
automatically receives a license from the original licensor to copy, distribute, link with or
modify the Library subject to these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein. You are not responsible for
enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any
other reason (not limited to patent issues), conditions are imposed on you (whether by court
order, agreement or otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot distribute so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then as
a consequence you may not distribute the Library at all. For example, if a patent license would
not permit royalty-free redistribution of the Library by all those who receive copies directly or
indirectly through you, then the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance,
the balance of the section is intended to apply, and the section as a whole is intended to apply
in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right
claims or to contest validity of any such claims; this section has the sole purpose of protecting
the integrity of the free software distribution system which is implemented by public license
practices. Many people have made generous contributions to the wide range of software
distributed through that system in reliance on consistent application of that system; it is up to
the author/donor to decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the
rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by
patents or by copyrighted interfaces, the original copyright holder who places the Library under
this License may add an explicit geographical distribution limitation excluding those countries,
so that distribution is permitted only in or among countries not thus excluded. In such case,
this License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser
General Public License from time to time. Such new versions will be similar in spirit to the
present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version
number of this License which applies to it and "any later version", you have the option of
following the terms and conditions either of that version or of any later version publis hed by
the Free Software Foundation. If the Library does not specify a license version number, you
may choose any version ever published by the Free Software Foundation.
88
14. If you wish to incorporate parts of the Library into other free programs whose distribution
conditions are incompatible with these, write to the author to ask for permission. For software
which is copyrighted by the Free Software Foundation, write to the Free Software Foundation;
we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH
ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
89
Appendix B
Streaming Video/Audio
Solution
Overview
Streaming video is a sequence of "moving images" that are sent in compressed form over the
Internet and displayed by the viewer as they arrive. With streaming, a Web user does not have
to wait to download a large file before seeing the video or hearing the sound. Instead, the
media is sent in a continuous stream and is played as it arrives.
Streaming Video/Audio through Internet Camera
To snapshot a JPEG image from the Internet Camera with specified resolution and quality:
http:///img/snapshot.cgi?[size=][&quality=]
Size = 1(160*128)
2(320*240)
3(640*480)
Quality = 1(Very low)
2(Low)
3(Normal)
4(High)
5(Very high)
To stream M-JPEG video from the Internet Camera (M-JPEG mode only)
http:///img/mjpeg.cgi or http:///img/main_mjpeg.htm
To stream video through the RTP/RTSP protocol from Internet Camera (MPEG-4 mode only)
rtsp:///img/media.sav
Note: Users need to specify the desired protocol in the players.
To snapshot a JPEG image (160*128, very low quality) through a mobile phone:
http:///img/mobile.cgi
90
FCC Warning statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the ollowing measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
FCC RF Radiation Exposure Statement:
1.
This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2007:06:20 15:18:06Z
Modify Date                     : 2007:06:21 14:36:20+08:00
Page Count                      : 95
Creation Date                   : 2007:06:20 15:18:06Z
Author                          : portia.chien
Producer                        : Acrobat PDFWriter 5.0Windows NT ª©
Mod Date                        : 2007:06:21 14:36:20+08:00
Metadata Date                   : 2007:06:21 14:36:20+08:00
Title                           : RC8020_manual.doc
Creator                         : portia.chien
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: P27YFF00

Navigation menu