Serome Electronics SRE06003 PC Camera User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	225493
Application ID	erFhdslunpy3j6MqifT4UQ==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	70.83kB (885364 bits)
Date Submitted	2002-02-08 00:00:00
Date Available	2002-02-07 00:00:00
Creation Date	2002-02-08 13:04:32
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2002-02-08 13:04:35
Document Title	users manual

FCC NOTICE
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC FULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED
OPERATION.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit difference from that to which
the receiver is connected.
- Consult the dealer of an experienced radio/TV technician for help.
NOTE : The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.
Open the ‘My Computer’ folder. Then click Zstar.exe in the
CD-ROM drive.
Click USB PC Camera Setup.
CONTENTS
Chapter 1. Installation
2. Click ‘Next’..
Chapter 2. SRE06003 Manual
Chapter 3. Q&A
1. Specifications
1/4” color CIF CMOS Image sensor
320k Pixels
Lens F2.0, f=5
Top-mounted Snap Shot
CIF 30Fps
QCIF 30Fps
2. System Requirements
Microsoft Windows 98, Windows ME, Windows 2000, XP
Pentium MMX 200MHz or higher
32MB RAM or higher (64MB recommended)
16bit colour display or higher
Connects to USB Port
3. The dialogue box for selecting which options you wish to install appears. Select
‘LnSCam’ and ‘Driver’, and then click ‘Next’.
Chapter 1. Installation
Install LnSCam
1. Close all programs currently running, including any virus protection programs
(some virus protection programs may interfere with installation). Insert the L&S
CD-ROM into your computer’s CD-ROM drive.
6. A dialogue box informing you that installation of the driver is complete will appear
as below. Please restart your system to complete installation (recommended).
4. A dialog box warning you to remove any PC Camera from the USB Port before
starting to install the driver will appear. If PC Camera is not connected to the USB
port, click ‘OK’.
If you are using the Windows 2000 Operating system, there is no need to restart your
system. Now please connect your PC Camera to the USB Port.
5. Setup starts automatically.
7. The [Setup has finished installing Look and Say USB Camera on your computer]
window appears. Click ‘Finish’.
If you are using the Windows 98 / ME Operating system, restart your computer and
connect your PC Camera to the USB Port. If you are using the Windows 2000
operating system, connect your PC Camera to the USB port. Then the ‘New
Hardware’ will be found and your USB PC Camera will be installed automatically.
8. Connect your PC Camera to USB Port.
Then the ‘New Hardware’ will be found and your USB PC Camera will be installed
automatically.
(1)
(2)
(3)
(4)
To check that your PC camera has been installed properly, go to the [Start] menu.
Point to [Settings] and click on [Control Panel].
Double click on [System].
Click the [System Properties] tab, then click the [Device Manager] tab.
A window containing a list of devices appears.
(5) Make sure that ’Samsung USB PC Camera(ZSMC) is now listed as an [Imaging
Device] in the [Device Manager].
Chapter 2 SRE06003 Manual
ΛνΣΧαµ ηασ τηε θυαλιτψ φυνχτιονσ το ηελπ ψ ου χρεατε ϕυστ αβουτ ϖαριουσ σιζεσ
οφ δισπλαψ ωινδοωσ ανδ ανψ τψ πε οφ ϖιδεο ωιτη ΑςΙ, ΑΣΦ φιλε φορµατ ανδ
πιχτυρεσ στιλλ ιµαγε ωιτη ΒΜΠ.
Ιφ ψ ου ηαϖε α θυεστιον ορ χοµµεντ αβουτ ΛνΣΧαµ 1.0, πλεασε εµαιλ ψουρ µεσσαγε
το ;µοον≅σεροµε.χο.κρ
Ωε ωιλλ κεεπ φινδινγ α ωαψ το χοννεχτ ωιτη οτηερ υσερσ το εξχηανγε ιδεασ, τιπσ,
θυεστιονσ, ανδ τεχηνιθυεσ φορ δεϖελοπινγ τηε υπγραδεδ προγραµ..
Ιν τηε δισπλαψ στοππεδ, χλιχκ τηε ΟΝ/ΟΦΦ
δισπλαψ ωινδοω ανδ τηε φυνχτιονσ ον.
βυττον ονχε µορε το τυρν τηε
View Size Control
Χλιχκ το χηανγε ωινδοω σιζε 160 Ξ 120, 176 Ξ 144, 320 Ξ 240, 352Ξ288
ανδ 640 ξ 480 πιξελ
On/Off
Χλιχκ τηε ΟΝ/ΟΦΦ βυττον το τυρν τηε δισπλαψ ωινδοω ον ορ οφφ.
Ωηεν χλιχκ τηε ΟΝ/ΟΦΦ βυττον ονχε, αλλ οφ φυνχτιονσ αρε στοππεδ ασ βελοω.
Χλιχκ Στιλλ Ιµαγε Χαπτυρε βυττον το χαπτυρε τηε στιλλ ιµαγε ωιτη ΒΜΠ φιλε.
Χλιχκ Οπεν φιλεσ το σεε τηε στιλλ ιµαγεσ ωηατ ψου χαπτυρεδ ανδ οπεν
Πιχτυρε φολδερ το σελεχτ στιλλ ιµαγε φιλε ωηατ ναµεδ ασ βελοω.
εξ)2001−06−15_20∋06∋56.βµπ (ψεαρ−µοντη−δαψ_ χλοχκ µινυτε σεχονδ.βµπ)
Video Format
Χλιχκ ςιδεο Φορµατ το χοντρολ τηε ϖιδεο φορµατ.
Σελεχτ Φραµε Ρατε, Χολορ σπαχε/Χοµπρεσσιον ανδ ∆ισπλαψ Σιζε ψου δεσιρεδ.
Τηεν χλιχκ Αππλψ .
Movie Capture
Χλιχκ τηε Μοϖιε Χαπτυρε βυττον το χαπτυρε ϖιδεο ωιτη ΑςΙ φιλε ορ
ΑΣΦ φιλε.
Το χαπτυρε τηε ϖιδεο ωιτη ΑςΙ φιλε, χλιχκ Νο .
Το χαπτυρε τηε ϖιδεο ωιτη ΑΣΦ φιλε το ρεδυχε δατα ϖολυµε, χλιχκ Ψεσ .
Ωηεν χαπτυρινγ ϖιδεο ωιτη ΑΣΦ φιλε, τηε θυαλιτψ οφ ϖιδεο χουλδ βε ινφεριορ.
Το σψνχηρονιζε ψουρ ϖοιχε ωιτη τηε ϖιδεο, υσε τηε µιχροπηονε.
Χλιχκ Οπεν φιλεσ το πλαψ τηε ϖιδεο ωηατ ψου χαπτυρεδ ανδ οπεν Μοϖιε
φολδερ το σελεχτ ϖιδεο φιλε ωηατ ναµεδ ασ βελοω.
εξ)2001−06−15_17∋49∋13.αϖι (ψεαρ−µοντη−δαψ_ ηουρ µινυτε σεχονδ.αϖι)
Video Source
Χλιχκ ςιδεο Σουρχε το χοντρολ τηε ϖιδεο σουρχε.
Τηισ οπτιον ισ αππλιεδ το τηεσε µοδελσ ; ΛΣ−Π32ΝΑ, ΛΣ−Π32ΝΒ
Still Image Capture
Ωιτη τηε ςιδεο Προχ Αµπ , σετ υπ τηε συιταβλε χονφιγυρατιον ωιτη τηε πλαχε
υσινγ τηε ΠΧ χαµερα. Ονχε ψου ηαϖε φινισηεδ σελεχτινγ ψουρ σεττινγσ, χλιχκ
Αππλψ .
<ςιδεο Προχ Αµπ>
Anti_Flicker - Φορ υσε ιν Κορεα, σελεχτ 60Ηζ φορ υσε ιν οτηερ χουντριεσ,
σελεχτ
τηε αππροπριατε φλυορεσχεντ λαµπ φρεθυενχψ φορ υσε ιν τηατ
χουντρψ. Το υσε τηε ΠΧ Χαµερα ουτσιδε, χλιχκ Ουτδοορ
Color Enable – Select the color screen or mono color screen.
Auto Exposure - Σελεχτ Αυτο Εξποσυρε
το χοντρολ τηε εξποσυρε
αυτοµατιχαλλψ. Ψου χαν χοντρολ τηε µινυτε εξποσυρε ρατε
ωιτη Λεϖελ χοντρολ βαρ.
FrameRate – Χοντρολ τηε ϖιδεο θυαλιτψ ανδ σπεεδ λεϖελ ωηατ ψουρ δεσιρεδ.
Flip – Μοϖε τηε σχρεεν υπ ορ δοων
Open Files
Χλιχκ τηε Οπεν Φιλεσ βυττον το σεε τηε πιχτυρεσ ανδ πλαψ τηε
ϖιδεο.
Τηε ϖιδεο φιλεσ αρε στορεδ ιν Μοϖιε φολδερ ανδ τηε στιλλ ιµαγε φιλεσ αρε στορεδ
ιν Πιχτυρε φολδερ.

A. When you run LnSCam for the first time, there may be some screen tremble
because the camera makes automatic environmental settings. This does not
affect the capture function.
Q. No video is displayed by the imaging devices
A. The camera drivers are not correctly installed.
To install the correct camera drivers:
1. Right-click on My Computer and go to the Device Manager tab.
2. Click on the Imaging Device.
3. Select and Remove "Look&Say USB Camera Ver-1.xx ".
4. Close the Device Manager.
5. Unplug your USB camera.
6. Install the Driver again.
7. Restart your computer.
8. Once the system is powered back up, plug the camera back in.
* Notice ; For Pentium II Processor Users, please set up the USB device to be
available.
1. Restart your computer.
2. Before start Windows, press ‘Del’ key to open CMOS SETUP
UTILITY.
3. Go to ‘Integrated Peripherals’ and find ‘On chip USB’.
4. If ‘On chip USB’ is disabled, move the curser on ‘Disabled’.
5. Press ‘+’ key to change ‘On chip USB’ Enabled.
6. Press ‘Esc’ key to quit.
7. To save it, press ‘Y’ key. Press ‘Esc’ again.
Exit
Q. When the PC shuts down unexpectedly
Χλιχκ τηε Εξιτ βυττον το χλοσε ΛνΣΧαµ .
A. First, check that your PC camera is correctly connected to the USB port. If
you unplug your PC camera and try to playback data with LnSCam, your
computer may shut down. Don’t disconnect the PC camera from the USB
Port when you are using LnSCam or the Internet Video chatting program.
Chapter 3 Q&A
Q. Why is the video playing at slower than real-time speed?
A. Even though the camera continues to transmit image signals, the PC cannot
handle lots of data continuously. Large amounts of data may temporarily interrupt
or stop display of video data.
Large qualities of data may cause your PC to shut down. In this case please
restart your computer.
Q. The screen is too unclear and foggy for viewing. What should I do?
A. This is because your camcorder is out of focus, or there may be a foreign
substance on the lens surface. Correct the focus with the focus dial or remove
the foreign substance with a soft cloth.
Q. When I run LnSCam for the first time, the colours on the screen change.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2002:02:08 13:04:32
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2002:02:08 13:04:35-05:00
Page Count                      : 8

EXIF Metadata provided by EXIF.tools