Shantou City Hengdi Industry HD16A24G Drone DX 2inch Nano User Manual 2016 04 07 SI DroneDX2inchNano IM v9 OL

Download:
Mirror Download [FCC.gov]
Document ID	3010179
Application ID	syEH2NSQKtR0h/4baTbxZQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	190.12kB (2376494 bits)
Date Submitted	2016-05-31 00:00:00
Date Available	2016-05-31 00:00:00
Creation Date	2016-04-12 11:30:40
Producing Software	Adobe Photoshop for Windows -- Image Conversion Plug-in
Document Lastmod	2016-04-12 14:45:24
Document Title	2016-04-07_SI_DroneDX2inchNano_IM_v9_OL
Document Creator	Adobe Illustrator CS6 (Windows)

SIIIIIIPEII IMAGE“ 12+ SIIIIIII'EII IMIIEES SIIIIIIPEII IMIIIIE’
Rechargeable 2.1.GHz DX-1 MICRO DRONE Rechargeable 2.4GHz DX-1 MICRO DRONE Rechargeable 2.46Hz DX-1 MICRO DRONE
INTRODUCTION SPECIFICATIONS READ ALL WARNINGS AND PRECAUTIONS BEFORE USE
Congratulations on your purchase of Drone Emery, 100 mAI, LI_po
the Sharper Image Rechargeable 2.4 Remme CoanIIerBaflew: 2 X 1.5VAAA A SAFETY WARNINGS:
GHz DX—1 Micro Drone. Get ready to
soar to new heights. Master the art of
drone flying with remote control
maneuverability. This lightweight
micro drone will provide hours of fun_ - Before each use, an adult should review the product and battery to determine that no damage or
hazards exist
- DO NOT TOUCH SPINNING PROPELLERS
Charging Timez APP’0Xima‘e'Y 30 "mm” - Not recommended for children under 12 years of age. As with all electrical products, precaution
Maximum Recommended Altitude 65 ft. should be observed during handling and use to reduce the risk of electrical shock.
- Adult supervision is required at all times
- Do not allow anything to intentionally make contact in any way with spinning propellers
- Prevent contact with spinning blades by turning off remote prior to handling drone
TABLE OF CONTENTS - Use caution and pay attention to your surroundings while operating drone
- Do not fly drone into animals, people, or inanimate objects
- Keep drone away from power lines, buildings, trees, public areas, and any other potentially
General Warnings Page 1 hazardws areas-
- Do not operate in rain, heavy wind, and or any type of severe weather
Contents and Remote Battery Installation Page 2 . Do not Iand drone on wet sunaces
Charging LiPo and Drone Storage Page 3 - Never touch or allow others to touch drone while it is flying
- Always turn drone off when it is not in use
RemOte overVIew Page 4 - Always fly drone in large open areas
Operating Drone Page 5 - Never fly drones above or near people. sudden changes in wind or other conditions could lead to
unexpected crashes.
MOdeS and InStaIIIng Blade Gaurds Page 6 - Always use caution when flying drone vehicles, obey relevant laws, respect the privacy and
Troubleshooting and FCC Warning Page 7 pmpenyrights “ah”-
- The drone shall never be modified or used for anything except its intended purpose.
Sl‘lN orirorrum:
TRIM mrirrnnriii
PLEASE RECYCLE OR
DISPOSE OF ELECTRONICS
‘ PROPERLY RECYCLING
INFORMATION is AVAILABLE AT
MSCUSTOMERCARE.COM
HOKING HAZARD —
MALL PARTS nor FOR CHlLDREfI UNDER 3 YEARS
ADULT ASSEMBLY REQUIRED Page i Page 1
Rechargeable 2.llGHz DX-1 MICRO DRONE Rechargeable 2.liGHz DX-1 MICRO DRONE Rechargeable 2.IIGHz DX-1 MICRO DRONE
Light indicates
remote is on
CONTENTS CHARGING BATTERY
Note: The Battery Charger will light up when it
is charging the battery and turn off when the
battery is fully charged. Charge time is
approximately 30 minutes.
Connect the Battery
Charger to the Drone
Throttle Joystick
ON/OFF
Remote Switch
Insert the USB
connector into
a USB power
. I Increases or decreases drone elevation
Turn off the drone before charging.
Carefully connect the Drone to USB charging \ '
ii
If
s. , / source
, H Use L/R arrows for spin . . .
cord as the connector. Connector is delicate / ‘ Multi Direction
ii
Joystick
and must be handled with care fl)
Connect USB connector to power source.
REMOTE BATTERY INFORMATION
1. Slide open battery compartment
2. Install 2 “AAA" batteries as shown in diagram
shown above
3. Replace and close battery compartment
Please note the plug direction when plugging Carefully unplug the charging cord from
in the drone: the Drone:
This side up
LITHIUM-POLYMER BATTERY WARNING
There is a risk of fire and personal injury if Li-Po
battery is punctured, damaged or misused
- Never expose battery to extreme temperatures
or moisture
- Do not subject battery to strong impacts
Always keep battery away from flammable
Spin Adjustment: Slide
left to spin drone
counterclockwise and
slide right to spin
drone clockwise
Side to Side
Adjustment: Slide
left to adjust to the
left and slide right
to adjust to the
Drone Controller USB Connector materials right
Only use manufacturer specified batter(ies),
charger(s), and/or adapters, if applicable, Correct ncorrect
specified by the manufacturer
\ - Battery is not serviceable Auto Orientation ON
L91 battery 000' to room temperature before Drone can be charged and stored inside of controller:
charging . . Forward/
While charging, never leave battery unattended Auto Orientation OFF Backwards
- Recycle or dispose of battery according to federal, ‘ Adjustment: Slide
state and local laws up to adjust
KEEP THIS INSTRUCTION MANUAL FOR REFERENCE forward and slide
down to adjust
BATTERY WARNING backwards
- Do not mix old and new batteries
- Do not mix alkaline, standard (carbon-zinc). or rechargeable inickol-cadrniumi i
b rt '
BIade Guards Replacement - InasioIItngsatteries using the correct polarity Do not snort-circuit the supply Ieirniriai
- Only use manufacturer specified batterlies), chargerfs), and/or adapters. If
Propellors applicable, specdled by the manufacturer
- Always use, replace, and recharge (if applicable) batteries under aduit supervision
KEEP THE PACKAGE FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION
Page 2 Page 3 Page 4
Rechargeable 2.46Hz DX-1 MICRO DRONE Rechargeable 2.46Hz DX-1 MICRO DRONE Rechargeable 2.46Hz DX-1 MICRO DRONE
. TIPS
OPERATING DRONE Step 4 ' I-Ift Off MODES . Do not crash drone into sand or dirt. Drone gears may become clogged
. Auto Landing . . . . . .
. . 1. Slowl and carefull brin the throttle u . , , , , , - wn i tl t fl , t In ff d h
Step 1 — Pre Fllght Checklist Propdilers will begih to Sam and drone Va” begin - This mode Will activate when the remote loses Signal or when remote is turned off or when battery . Slailglsemfigl'l‘fiofn xafsrigidngfig: a" wemg
1. Read all warnings and instructions
IO elevate YOU can compensate for some Of the gets too low, - Always Press Throttle all the way down after crashing or when something gets stuck in propellers
2. Install remote batteries, page 2 '
. ' ' ' ‘ . Never fly drones above or near people, sudden changes in wind or other conditions could lead to unexpected crashes.
drones drifting by using the MUIII Directional The ldeaI aUto Iandlng helght IS 15". - Always use caution when flying drone vehicles. obey relevant laws. respect the privacy and property rights of others.
3' Make sure that drone and remote Button or by following step 5 You may need to
are powered off '
- This mode allows you to safely and slowly land your drone Without having to control the speed. It is . The drone shall never be modified or used for anything except its intended purpose,
done for you automatically.
4 Install Blade Guards page 6 praCIice this step several “mes before WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's
. SUCCESS U 9 In rone In 0 e air. authority to operate the eqmpment.
5- Charge batteries page 3 I f lly g tt g d t t th ' A t O ‘ t t‘
- i - LI 0 rlen a IOn
. . - Auto Orientation default setting is off. To enter this mode press Auto Orientation “+" button. Remote will TR°UBLESH°9TIN9= . , ,
Step 2 - Choosmg a location Step 5 _ Drone Begins to Drift beep twice When remote SWItch ls turned on, the remote light does not Illuminate:
. ' ‘ ' . . . . . ' I I I I I I I I 1) Check that batteries in the remote are installed correctly OR
Drlone '5 deSIgned to be flown Indoors F°”°W ““5 step If your drone begins ‘0 11"“ Whlle - After drone success paired, the 2 White LED lights toward orientation Will be the original forward 2) Replace with new batteries
(Always make sure you have take Off 0" during flight orientation, when drone is in auto orientation mode, whatever the drone spin, the fonivard orientation will Wh m I _ _I h d m I LED_ II h' d I _ b _
' . r ri k r : Ii th - . - . - en e remo e is swl c e on, e remo e is as ing an remo e is eeping:
enough space to fly drone D one d I15 baC wa d5 '8 de e be preVIOUIS original forward Orlentatlon' , , , . 1) Remote batteries are low: replace them with new batteries
. Forward/ Backwards Adjustment UP - Remote Will beep every OS to indicate the drone is in Auto Orientation mode.
' A'Ways f°”°‘” “mmgsr page 1 ' Drone drifts forwards Slide the - To exit mode, press the button. Remote will sound 1 long beep indicating that it has exited Auto Drone and remote properly pair, bunhe drone will not |ift~off2
. Forward/Backwards Adjustment down Orientation mode. 1) Drone Li-Po needs charging. Use charging cable to connect the drone to power source.
Step 3. _ Stanmg Drone . . ' Drone drifts left: Slide the Side 10 Side After trimming the drone, the drone flight is very unstable and cannot fly properly:
1- Mak'"9 59“? your remote '5 9ft slide Adjustment to the right. 1) One or more blades are most likely damaged;
drone SWItch to ON. Drone |l hts Will . . - . - - - 2) Turn off the drone and remote.
Drone drifts right. Slide the Side to Side
begin to flicker Adjustment to the left. 3) Replace with the proper number replacement blade and try flying again.
2- Choose a flat even surface and - Drone 3 ins clockwise viewin drone from After impact, the drone is unstable:
. p 9 Press down at base
follow the diagram top): Slide the Spin Adjustment to unrll Ir char; 1) Put the left remote control lever to the left bottom and put the right remote control lever
S-Tumremoteon- BringtheThromea" meter 2. lai::i.%i‘:::::.::2:333:22Tamarind:signalled:first.
. . ‘ I u , I .
the way up then bring 'i all the way - Drone spins counter-clockwise (viewing p 9
down. Remote Will beep and drone drone from top): Slide the Spin Remote Controller and Drone can not be paired:
lights will flicker rapidly then turn on Adjustment to the right. 1) Check Point: Remote Controller must be closed to Drone, not exceed 4 meters.
permanently once paired.
4. Drone is ready for flight.
Note: If there are 2 sets of Drones within 4 meters for Pairing, you must pair one successfully before pairing the second set.
Always turn Off remote prior to retrieving
or picking up drone. This will help you
avoid accidently activating propellers.
This drnne cumplies with Part 15 of the FCC Rules. Operation is subject tn the fnlluwing two conditions: [ll this device may not cause
harmful interference, and [2) this device must accept any interference received, including interference that may cause undesired nperation,
NOTE: This equipment has been tested and found to comply with the limits for a Class a digital device. pursuant in Perl 15 of the Foo Rules. These ilmits are designed to
prowde reasonable proiection against nannrul interference in a residential installation This eqmpnient generates, uses and can radiate radio frequency energy and. if not installed
_ _ _ 1 . Identify the number on the 2. Carefully align the propeller so it is 4, Carefully clamp the Blade Gaurd and used in accordance witntns instructions, may cause harmful interference to radio commUv nicatlens. However there is no gueranteethat Interference will not occur in a
Step 5 ' Operating Drone In Flight blade guard and match it to horizontal to the leg of the Drone. around the propeller post. Press Dan'°"'a""s‘a“a"°"
The drones range is approximately 1 00 feet the number on the Drone. down on the base until it Clicks. If this equipmentdues cause harmful interference to radio or television recepllon, which can bedeter‘rnlned by Iumirig the equipment off and on the user Is encouraged to try to
t Read and be aware of all warnings found 3- Coming from belOW. angle the Blade . _ med me."§:::;i'§f I’;$.°l$?éi§1lf§lil§fl§? mm;
on page 1 Gaurd to the propeller post. 5. Repeat on three remaining corners. . Imam II“, sepmum WWW, me “mpmsmm mew
M I t . - d . d I t. b . - Connect the equipment into an outlet on a Circuit different from Ihat to which the receiver is connected
' aln aln your eSIre e eva ion y usmg v Consult iris dealer or an experienced radio/TV technician for help.
the Throttle REPLACING PROPELLERS \ // c Sharper Image. All Rights Reserved.
, . - - . - SHARPER IMAGE® name and logo are registered trademarks manufactured and marketed by MerchSource, LLc under license. All other logos and
Use the Throttle onSt'CK "1 a Circle motion _ _ trademarks are proprietary to their respective owners. The artwork and design of this package are protected by us copyright law and may not be
to spin the drone 1 . Follow diagram to the right. JIL , reproduced. distributed, displaced, published or used for any purpose without prior written permission. Altering, removing or reproducing any of the
- Use the Multi Directional Joystick to move 2. Make sure you installed the correct blade Each ? "Edema” ”WM/"9*“ "mes °" ""5 ”acme '5 ”m ”mm“-
forwards. backwards, and side to side blade has a letter written on it I @2016 MerchSource, l_l_c. All rights reserved.
Distributed by MerchSource, LLc, Irvine, CA 92513.
- Review step 5 if your drone begins to drift
NOTE: Blade 1 turns counter clockwise and PATENT PENDING
Page 5 Blade 2 turns clockwise / \\ Page 6 Printed in China Page 7

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Create Date                     : 2016:04:12 11:30:40+08:00
Modify Date                     : 2016:04:12 14:45:24+08:00
Metadata Date                   : 2016:04:12 14:45:24+08:00
Thumbnail Format                : JPEG
Thumbnail Height                : 256
Thumbnail Width                 : 205
Thumbnail Image                 : (Binary data 14967 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : 2016-04-07_SI_DroneDX2inchNano_IM_v9_OL
Rendition Class                 : proof:pdf
Document ID                     : xmp.did:3FDBB1945E00E611B38EBFEEC6D50B9F
Instance ID                     : uuid:432e8971-308d-4335-8762-4d2d2d2748ec
Original Document ID            : uuid:14d05da2-c3c0-b644-a2e7-6a712f3c803a
Derived From Instance ID        : xmp.iid:E1B779D77900E611AAF59ED37656AAE2
Derived From Document ID        : xmp.did:3FDBB1945E00E611B38EBFEEC6D50B9F
Derived From Original Document ID: uuid:14d05da2-c3c0-b644-a2e7-6a712f3c803a
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, converted, derived, saved
History Instance ID             : xmp.iid:697db43e-26d7-4cd4-b231-1afa5bca5fa0, xmp.iid:E1B779D77900E611AAF59ED37656AAE2, xmp.iid:E2B779D77900E611AAF59ED37656AAE2
History When                    : 2015:06:23 08:54:41-07:00, 2016:04:12 14:43:18+08:00, 2016:04:12 14:43:20+08:00
History Software Agent          : Adobe Illustrator CC 2015 (Macintosh), Adobe Photoshop CS6 (Windows), Adobe Photoshop CS6 (Windows)
History Changed                 : /, /, /
History Parameters              : from image/jpeg to application/pdf, converted from image/jpeg to application/pdf
Ingredients File Path           : /Volumes/ArtMain/Art Library/2016/Instruction Manuals/Drone DX 2inch Nano/Asia Upload/2016-04-07_SI_DroneDX2inchNano_IM_v9/Links/DX1Nano_RCRemote_v3_BW.psd, /Volumes/ArtLibrary/2016/Instruction Manuals/Drone DX 2inch Nano/Work in Progress/2016-04-05_SI_DroneDX2inchNano_IM_v6/Links/DX1NanoTop_Reflection_RevisedLines_v3.psd, /private/var/folders/8l/bmkkpknj1g38v4jdbhxwbd_d2dfk__/T/TemporaryItems/(A Document Being Saved By Illustrator CC)/Zp4BE0.tif
Ingredients Document ID         : adobe:docid:photoshop:4c95a342-3cf8-1179-aebf-c8275926ff7e, adobe:docid:photoshop:61527fdf-31a5-1179-84a6-b32dfb68436a
Ingredients Instance ID         : xmp.iid:1051aed1-eceb-46a3-b8f6-7a6ba9ebade5, xmp.iid:af0a6a95-f645-4cb7-941b-9a3f52060b6b
Producer                        : Adobe Photoshop for Windows -- Image Conversion Plug-in
Color Mode                      : CMYK
Slug Family                     : Helvetica Neue
Slug Version                    : 001.000
Slug Outline File Size          : 29969
Slug Kerning Checksum           : 70959
Slug Foundry                    : Adobe Systems
Slug Font Kind                  : PostScript
Slug Checksum                   : 3260415621
Slug Post Script Name           : HelveticaNeue-BoldCond
Slug Font Sense 12 Checksum     : 3260415621
Page Count                      : 1
Creator                         : Adobe Illustrator CS6 (Windows)

EXIF Metadata provided by EXIF.tools