Sharp HRO00036 Cellular Phone User Manual
Sharp Corporation Cellular Phone
UserManual.wiki
>
Sharp
>
HRO00036 User Manual
User Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![Getting Started 15To Copy Contacts List from the SIM CardWhen you insert the SIM card into your phone for the first time and start the Contacts List application, you are asked whether you wish to copy Contacts List entries on the SIM card. Follow the on-screen instructions, or you can do it later using the Contacts List menu as follows:“Contacts” → “Contacts List” → [Options] → “Advanced” → “Copy All Entries”1. Select “From SIM to Handset”.Display Indicators (Main Display)Status indicatorsRight soft keyLeft soft keyCentre key](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-16.png)
![16 Getting StartedStatus Indicators1. / /#/#/#:Strength of received signal/Service out of range/GPRS enabled and within range/roaming outside network/GPRS enabled, within range and roaming2. : Call incoming3. : Call in progress4. / : Current WAP or MMS communication mode [CSD/GPRS]5. / : Data communication mode enabled/fax communication mode enabled6. : “Diverts” (p. 102) set to “All Calls”7. / : Secure WAP page displayed8. / : Text message alerts [unread/mailbox full]9. / : Multimedia message alerts [unread/mailbox full]10. /: E-mail alerts [unread/mailbox full]11. : USB data cable connected12. / : “Infrared” connection [enabled (grey)/ communicating (red)]13. / : Bluetooth wireless setting [enabled/ communicating]14. / : Java™ application [executed (colour)/ suspended (grey)]15. (No display) / / / / :Current profile [Normal/Meeting/Activity/Car/Headset/Silent]16. : T9 text input method enabled17. ///:Current text input method [First letter upper case/Upper case/Lower case/Numeric]18. / / : “Ringer Volume” (p. 93) set to “Silent”/Vibration alert (p. 94) [enabled/enabled and silent]19. : Battery level20. : WAP alert 21. / : Schedule entry enabled [with/without a reminder alarm]](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-17.png)
![18 Getting Started4. / : “Infrared” connection [enabled/communicating]5. / :Bluetooth wireless connection [enabled/communicating]](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-19.png)
![Navigating Functions 19Navigating FunctionsAll applications are accessed from the Main menu. To open the Main menu, press the centre key ( ) during standby.To launch applications, you will need to highlight menu items, and make selections. To select a menu item (indicated in quotation marks), move the cursor using a, b, c and d, and press to commit your selection.In certain procedures, you will need to press one of the soft keys (indicated in square brackets), which are displayed at the bottom left and right of the screen. Press the corresponding soft key (A or C).To return to the previous screen, press the right soft key if it displays “Back”. To close the Main menu, press the right soft key if it displays “Exit”.Each section in this user guide starts with a list of items you will need to select in order (indicated in italics) before performing the procedures shown. Select each item to reveal the next set of items that you have to select. Open subsection items after opening those listed in the main section.Example:“Contacts” → “Contacts List” → [Options] → “Advanced”](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-20.png)
![20 Call FunctionsCall FunctionsMaking a Call1. Enter the area code and the phone number you wish to dial and press D to dial.If you enter the wrong number, press [Clear] to delete the number to the left of the cursor.Emergency Calls1. Enter 112 or 911 (international emergency number) using the keypad and press D to dial.Note• Emergency calls may not be available on all mobile phone networks when certain network services and/or phone features are in use. Contact your network operator for more information.• This Emergency number can normally be used to make an emergency call in any country, with or without a SIM card inserted, if a GSM network is within range.International Calls1. Press and hold Q until a “+” (international dialling prefix) sign is displayed.2. Enter the country code, followed by the area code (without the leading zero) and the phone number, and press D to dial.Speed DiallingUp to 8 phone numbers from the Contacts List memory (Handset and SIM) can be assigned to speed dials. You can call the numbers using the digit keys (H to O).For details on setting the Speed Dial List, see “Speed Dial List” on page 37.1. To dial a number using the speed dial, press and hold any of the digit keys (H to O).The phone number stored in the Speed Dial List is dialled.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-21.png)
![Call Functions 21RediallingYou can redial numbers in the call log. Select from specific categories or “All Calls”. Specific category contains up to 10 numbers and the “All Calls” list contains up to 30.1. Press D during standby.2. Select the category from “All Calls”, “Dialled Numbers”, “Missed Calls” or “Received Calls”.To switch logs, press c or d.3. Select the phone number you wish to call.4. Press D to redial the call.Automatic RediallingThis setting allows you to automatically redial the number if the first attempt was unsuccessful because the called party was busy.If you wish to stop redialling, press F or [End].To Set the Auto Redial Function“Settings” → “Call Settings” → “Auto Redial”1. Select “On” or “Off”.Note• When you receive an incoming call, the Auto Redial function is interrupted.• Automatic redialling is not available for fax and data calls.Answering a CallWhen an incoming call is detected, the phone rings and the mobile light flashes.1. Press D, or [Answer] to answer the call.Or press any key except F and [Busy] when the “Any Key Answer” function is enabled. Set the Any Key Answer function in the profile of each mode. (p. 98)Tip• When the Personal handsfree kit (option) is connected to the phone, you can answer calls by pressing the Answer button.• If you have subscribed to the Calling Line Identification (CLI) service and the caller’s network sends the number, the caller’s number is displayed on the screen. If the caller’s name and number are stored in the Contacts List, the caller’s name and phone number are displayed on the screen.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-22.png)
![22 Call Functions• If the number is a restricted number, the display shows “Withheld”.• When receiving a call from the person whose picture is registered in the Contacts List, receiving display and the picture are displayed alternately.Rejecting an Incoming Call1. Press F or press and hold the side-up or side-down key whilst the phone is ringing to reject a call you do not wish to answer.Letting the Caller Know You are Unavailable1. Press [Busy] whilst the phone is ringing to send a busy tone to the caller of an incoming call letting them know that you cannot answer the call.Incall MenuYour phone has additional functions available whilst a call is in progress.Adjusting the Earpiece VolumeDuring a call, you can adjust the earpiece volume (and handsfree volume, if connected).1. During a call, press the side-up or side-down key to display the Earpiece Volume screen.2. Press the side-up key (or a/d) to increase the volume of the call or press the side-down key (or b/c) to decrease the volume.Five levels (level 1 to 5) are selectable.3. Press when the volume is set to the desired level.The phone returns to the in-call screen automatically if left unoperated.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-23.png)
![Call Functions 23Putting a Call on HoldThis function allows you to manage two calls at the same time. If you wish to make another call whilst you are talking to someone, you can put the current call on hold to call someone else.To Make Another Call during a Call1. During a call, press [Options].2. Select “Hold”.The current call is put on hold.To retrieve a call, press [Options] and select “Retrieve”.3. Enter the phone number you wish to make another call to, then press D.Tip• You can also make another call by entering the phone number during a call instead of steps 1 and 2. The current call is automatically put on hold.Call WaitingThis service notifies you of another incoming call whilst you have a call in progress.1. During a call, press [Options] and select “Hold & Answer” to answer the second call.The first call is put on hold and you can now talk to the second caller.2. Press [Options] and select “Swap Calls” to switch between the two calls.3. Press [Options] and select “Release Call” to end the current call and return to the held call.Note• You need to set “Call Waiting” to “On” if you use the Call Waiting service (p. 103).• Call Waiting service may not be available on all networks. Contact your network operator for more information.• If you do not wish to answer the second call, press [Busy], or press [Options] and select “Busy” or “Reject”, in step 1. If “Reject” is selected, the call log of the second call is saved as a missed call.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-24.png)
![24 Call FunctionsAccessing SMS Menu During a Call1. During a call, press [Options] and select “Text”.The following options are available: “Create Message” to create an SMS, or “Inbox”, “Sent” or “Drafts” to access these folders. For details on SMS, see “Text (SMS)” on page 53.Conference CallConference call is a call with more than 2 participants. You may include up to 5 participants in a conference call.To Make a Conference CallTo make a conference call, you must have one active call and one held call.1. During a call, press [Options] and select “Multiparty” to answer the second call.2. Select “Conference All” to join the conference call.3. Press F to end the conference call.Note• Conference call service may not be available on all networks. Contact your network operator for more information.• You have more options for the Conference call in step 2:• To put all participants on hold, select “Conference Hold All”.• To put all participants except the current call on hold, select “Private”.• To end the call with all participants, select “Release All”.• To disconnect from the conference call but still allow the other participants to continue talking together, select “Transfer”.• To put the current call on hold and continue to have a conference call with the remaining participants, select “Exclude”.• To reject adding more participants to the current party, select “Reject”, or you can send the busy tone by selecting “Busy”.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-25.png)
![Call Functions 25To Add New Participants to the Conference Call1. Press [Options] and select “Dial”.2. Enter the number you wish to include in the conference call and press D to dial.3. Press [Options] and select “Multiparty”.4. Select “Conference All” to join the conference call.If you wish to add other participants, repeat steps 1 to 4.To End the Call with a Conference Call Participant1. During a conference call, highlight the person that you wish to disconnect from the conference call.2. Press [Options] and select “Release Call”.To Have a Private Conversation with One of the ParticipantsIf you wish to have a private conversation with one of the participants, you may select the participant from the conference list and put the other participants on hold.1. During a conference call, select the person that you wish to talk to.2. Press [Options] and select “Multiparty”.3. Select “Private”.4. Once you have finished the private conversation, press [Options] and select “Multiparty”.5. Select “Conference All” to return to the conference call.Muting the Microphone1. During a call, press [Mute] to mute the microphone.To unmute the microphone, press [Unmute].](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-26.png)
![26 Entering CharactersEntering CharactersWhen entering characters to create Contacts List entries, text messages or multimedia messages, etc., press the corresponding keys.In multi-tap input method, press each key until the desired character is displayed. For example, press H once for the letter “A” or twice for the letter “B”.Table of CharactersPressing each key scrolls characters in the following order. The order varies depending on the language selected.English ModeKey Upper Case Characters Lower Case Characters NumericG. (full-stop) , (comma) - (hyphen) ? !’ (apostrophe) @ :1 1HABC2 abc2 2IDEF3 def3 3JGHI4 ghi4 4KJKL5 jkl5 5LMNO6 mno6 6MPQRS7 pqrs7 7NTUV8 tuv8 8OWXYZ9 wxyz9 9Q(space)+ = < > € £ $ ¥ % &0 0PSwitches character case among four modes: Abc, ABC, 123 and abc.R.,?!:;-+#*@' '' ( )_&€£$%/ ˜ <>§= \ | ¥¿¡^[ ]{ }¤ÅÄÆå äæàÇÉèé ìÑñÖØöøòßÜüù∆ΦΓΛΩΠΨΣΘΞ (space) ↵G-O:QPress and hold to enter 0 - 9 numbers.P: Press and hold to shift between multi-tap and T9 mode.R: Press and hold to display the language options screen.Key Upper Case Characters Lower Case Characters Numeric](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-27.png)
![Entering Characters 27Changing the Input LanguagesYou can change the input language on the text entry screen.1. On the text entry screen, press [Options].2. Select “Input Language”.If “Input Language” is not displayed, select “Text Options” and then select “Input Language”.3. Select the desired language.Tip• You can press and hold R instead of steps 1 and 2 to display the language options screen.Changing the Input MethodT9 Text InputT9 text input method is a shortcut to enter text easily and quickly.1. On the text entry screen, press and hold P to enter T9 mode.2. Press [Options].3. Select “Input Method”.If “Input Method” is not displayed, select “Text Options” and then select “Input Method”.4. Select the input mode (Abc, ABC, abc, 123).5. Press each key once for any letter you require on that key.To enter the word “How”, press J L O.6. If the word shown isn’t the one you want, press a or b until you highlight the correct one.7. Press to select the word.Note• If the correct word is not shown in step 6, enter the correct word again after switching to the multi-tap input method.Tip• If you press Q instead of step 7, a space is inserted next to the selected word.Symbols and Punctuations1. On the text entry screen, press [Options].2. Select “Add Symbol”.If “Add Symbol” is not displayed, select “Text Options” and then select “Add Symbol”.3. Select the desired symbol.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-28.png)
![28 Entering CharactersMy DictionaryYou can create your own word list for T9 text input.1. On the text entry screen in T9 mode, press [Options].2. Select “My Dictionary”.If “My Dictionary” is not displayed, select “Text Options” and then select “My Dictionary”.3. Select “Add New Word” and enter a new word.To edit a word in the list1. On the text entry screen in T9 mode, press [Options].2. Select “My Dictionary”.If “My Dictionary” is not displayed, select “Text Options” and then select “My Dictionary”.3. Highlight the desired word.4. Press [Options] and select “Edit”.5. Modify the word.Tip• You can also carry out the following steps to register a new word in the list for T9 text input.1. Enter a (part of) word in T9 mode you wish to register.2. Press [Options].3. Select “My Dictionary”.If “My Dictionary” is not displayed, select “Text Options” and then select “My Dictionary”.4. Modify the word.Using Text TemplatesYou can use the sentences registered in Text Templates when entering characters.For details on creating the text template, see “Adding Phrases to Text Templates” on page 70.1. On the text entry screen, move the cursor to the point you wish to insert the template.2. Press [Options].3. Select “Text Template”.If “Text Template” is not displayed, select “Text Options” and then select “Text Template”.4. Select the desired text template.The selected text template is inserted.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-29.png)
![32 Contacts ListContacts ListYou can store the phone numbers and E-mail addresses of your friends, family and colleagues in the Contacts List.Depending on the size of the entry, your phone can store up to 640 entries. In a Contacts List, you can store the following items.Items stored in the handset memoryFirst NameLast NameTel MobileTel PrivateTel OfficeE-mail PrivateE-mail BusinessGroupAddress (Street & Number, Postal Code, City, State/Province, Country)NoteTip• There is no character limit for entering text into the above fields when using the internal memory.Items stored in the SIM memoryName: The number of characters that can be stored differs depending on the SIM card you use.Phone number: Up to 40 digitsUsing the infrared or Bluetooth wireless function, you can send the Contacts List entry to a PC to share the same entries.Selecting the Storage Memory“Contacts” → “Contacts List” → [Options] → “Advanced” → “Save New Contacts”1. Select Contacts location from “Handset Memory”, “SIM Memory” or “Choose before Saving”.Tip• “Choose before Saving” prompts you to choose the memory every time you save a new entry.Changing the List Displayed“Contacts” → “Contacts List” → [Options] → “Advanced” → “Contacts Location”1. Select from “Handset Memory”, “SIM Memory” or “Both”. (M 8-1)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-33.png)
![Contacts List 33Changing the Name Order“Contacts” → “Contacts List” → [Options] → “Advanced” → “Name Order”1. Select from “First - Last name” or “Last - First name”.Add New ContactYou can choose either the phone or SIM card memory locations to store the new entry. For switching locations, see “Selecting the Storage Memory” on page 32.The amount of phone numbers that you can store to the SIM card is dependent on its capacity. Contact your network operator for details.“Contacts” → “Add New Contact”If you select the “Choose before Saving” option for the memory to be used, the selection is between “To Handset” and “To SIM”.1. Select the field you wish to fill in, and enter the relevant information.2. Press [Save] when finished.Tip• To create an entry, at least one field must be filled. If you create a new entry on the SIM card, you need to enter a phone number.Adding a Thumbnail to Entries“Contacts” → “Contacts List”1. Highlight the desired entry.2. Press [Options] and select “Edit/Add Details”.3. Press [Options] and select “Picture”.4. Select the desired picture.5. Press [Save] when finished.Note• From the Contacts List entry that has a thumbnail added, you can change or delete it by selecting “Change” or “Remove” after step 3.• If you delete a picture in Saved Pictures, the corresponding thumbnail is also deleted.• If the picture size exceeds 120 dots [W] or 160 dots [H], specify the area you wish to display. (M 8-2)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-34.png)
![34 Contacts ListCopying Contacts List Entries between SIM Card and Handset“Contacts” → “Contacts List” → [Options] → “Advanced” → “Copy All Entries”1. Select “From SIM to Handset” or “From Handset to SIM”.Note• When you insert the SIM card into your phone for the first time and start the Contacts List application, the confirmation screen appears automatically, asking you if you wish to copy or not. The number of Contacts List entries to be copied varies depending on the SIM capacity.Copying a Single Entry from Handset to SIM Card“Contacts” → “Contacts List”1. Select the desired entry.2. Highlight the desired phone number.3. Press [Options] and select “Copy to SIM”.Finding a Name and Number“Contacts” → “Contacts List”1. Enter the first few letters of the name.Search results are displayed in alphabetical order.Tip• You can select the Contacts location from “Handset Memory”, “SIM Memory” or “Both” before searching.• To view the details of the item such as address, highlight the desired item, press [Options]and select “View”.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-35.png)
![Contacts List 35Dialling from the Contacts List“Contacts” → “Contacts List”1. Highlight the desired entry and press D.Tip• If more than one phone number is registered for the entry, select the desired phone number after step 1 and press D. You can also dial the desired phone number by pressing the digit key corresponding to the position the entry is on the list.• You can also dial from the details screen of the Contacts List. On the details screen, select the desired phone number and press D.• If you select “SIM Memory” for the “Contacts Location” option in Contacts List menu (p. 32), only one phone number entry is displayed.Editing Contacts List Entries“Contacts” → “Contacts List” → [Options] → “Edit/Add Details”1. Select the field you wish to edit, and modify the information.2. Press [Save] when finished.Deleting Contacts List EntriesDeleting All Contact Entries“Contacts” → “Contacts List” → [Options] → “Advanced” → “Delete All Entries”1. Enter your handset code.2. Select “Handset Entries” or “SIM Entries”.The default handset code is “0000”. For details on changing the handset code, see “To Change Handset Code” on page 112.Deleting a Contact Entry“Contacts” → “Contacts List”1. Highlight the desired entry.2. Press [Options] and select “Delete”.Viewing GroupsYou can set group icons when storing Contacts entries so that you can easily find and edit them.“Contacts” → “Contacts List” → [Options] → “Advanced” → “Group” → “View Groups”1. Select the desired group.“ ” appears next to the selected group. Select the group again to cancel, and the checkbox becomes unchecked.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-36.png)
![36 Contacts ListTip• Press [Options] and select “Current Only” to view only the selected group or “Select All” to view all groups.Group CallDifferent ringtones can be set for each group. When you purchase this phone, groups are set to off. If you do not set a group ringtone, the ringtone assigned in the Settings menu is used.“Contacts” → “Contacts List” → [Options] → “Advanced” → “Group” → “Group Call”1. Select the desired group.2. Select “Switch On/Off”.3. Select “On” or “Off”.4. Select “Assign Ringtone”.5. Select “Preset Sounds” or “My Sounds”.6. Select the desired ringtone.For details on selecting a ringtone, see “Assigning Ringtone” on page 94.7. Select “Vibration” and select from “On”, “Off” or “On & Link to Sound”.For details on selecting a vibration, see “Vibration” on page 94.8. Select “Light” and select “On”, “Off” or “On & Link to Sound”.For details on selecting a light, see “Light” on page 95.9. Press [OK].Assigning a Ringtone to Each Contacts List EntryA specified ringtone or vibration setting can be associated to a pre-registered entry.“Contacts” → “Contacts List”1. Select the desired entry.2. Press [Options] and select “Edit/Add Details”.3. Press [Options] and select “Ringtone”.4. Select “Switch On/Off”.5. Select “On” or “Off”.6. Select “Assign Ringtone”.7. Select “Preset Sounds” or “My Sounds”.8. Select the desired ringtone.For details on selecting a ringtone, see “Assigning Ringtone” on page 94.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-37.png)
![Contacts List 379. Select “Vibration” and select from “On”, “Off” or “On & Link to Sound”.For details on selecting a vibration, see “Vibration” on page 94.10. Select “Light” and select “On”, “Off” or “On & Link to Sound”.For details on selecting a light, see “Light” on page 95.11. Press [OK].12. Press [Save].Memory StatusThis function helps you to check the memory used in the Contacts List.“Contacts” → “Contacts List” → [Options] → “Advanced” → “Memory Status”Speed Dial ListYou can set a maximum of 9 phone numbers in the Speed Dial List (p. 88).Setting Contacts List Entries in the Speed Dial List“Contacts” → “Contacts List”1. Select the desired entry.2. Highlight the desired phone number.3. Press [Options] and select “Add to Speed Dial”.4. Select the desired list number.Tip• The nine digit keys correspond to list numbers.• To view the speed dial list, see page 88.Sending a Contacts List Entry“Contacts” → “Contacts List”1. Highlight the desired entry.2. Press [Options] and select “Send Contact”.3. Select “Via Bluetooth” or “Via Infrared”.For “Via Bluetooth”The phone starts searching for Bluetooth wireless technology enabled devices within 10 metres.When detected, a list of enabled devices is displayed allowing you to select the desired device. The connection can be established and the entry is sent.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-38.png)
![38 Contacts ListFor “Via Infrared”The phone starts searching for an infrared-enabled device within 20 centimetres.When detected, the infrared connection is established and the entry is sent.Note• When pairing, you need to enter your passcode when establishing contact with a Bluetooth wireless technology enabled device for the first time.Tip• You can send your own Contacts List entry. Select “My Card” in step 1. For details on storing your information in My Card, see “Registering Your Information as a Contacts List Entry”.Receiving a Contacts List EntryWhen the phone receives a Contacts List entry, a confirmation message appears.1. Press [Yes].The received entry is registered in the Contacts List. Press [No] to reject.Tip• For details on making Infrared or Bluetooth wireless settings, see “Connectivity” on page 90.Registering Your Information as a Contacts List EntryYou can store your information in the Contacts List.“Contacts” → “Contacts List” → “My Card”1. Press [Options] and select “Edit/Add Details”.2. Select the field you wish to fill in, and enter the relevant information.3. Press [Save] when finished.Tip• You can send your Contacts List entry via Bluetooth or Infrared. Highlight “My Card” in the Contacts List and press [Options]. Select “Send Contact” and then select “Via Bluetooth” or “Via Infrared”.Dialling a Service Phone NumberCertain SIM cards contain service phone numbers that can be dialled. Contact your SIM card vendor for more information. On the Contacts screen, “Service Dialling No.” is displayed at the bottom of the list.“Contacts”1. Select “Service Dialling No.”.2. Select the desired service phone number.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-39.png)
![40 CameraCameraYour phone has an integrated digital camera.This allows you to take and send pictures or video clips wherever you are.Take PicturePut the phone into the digital camera mode to take a picture. Pictures are saved in Saved Pictures in JPEG format in the following three picture sizes.L: 480 × 640 dotsM: 240 × 320 dotsS: 120 × 160 dotsTaking Pictures“Camera” → “Take Picture”The preview is displayed through the screen.1. Press or the side-down key to take the picture.The shutter sounds and the still image of the taken picture is displayed. Press [Cancel] to retake a picture.2. Press [Save].“Saving (file name) to My Items…” is displayed, then the picture is registered.3. Press F to return to standby.Remaining shots indicator123: Indicates the remaining number of pictures that can be taken.Tip• Pressing E during standby also activates digital camera mode.• If you wish to use an auxiliary ligtht, press R or the side-up key before step 1. Press it again to turn the light off. appears or disappears on the upper part of the screen.• If you wish to send a picture by multimedia message after taking the picture, press before step 2. Then select “Multimedia” or “Postcard”. (The Postcard service is not available with some service providers. Please contact your service provider for more information.) Large MMS messages may cause the size of attached pictures to be reduced.Using the Full ScreenThe preview can be displayed on the full screen without the soft key area and indicators. “Camera” → “Take Picture” → [Options] →“Full Viewfinder”1. Select “On” or “Off”.Note• When “Picture Size” is set to “S”, you cannot use the full screen. (M 5) (M 5-1)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-41.png)
![Camera 41Tip• You can also turn on or off the full screen mode by pressing Q.Taking a Self-PortraitTo take a self-portrait, hold the phone with the mirror facing you whilst holding the phone at least 40 cm away. Press or the side-down key to take the picture.Using the Zoom FunctionPress c or d to change the zooming ratio.Zooming ratio indicators: Magnification.Note• When “Picture Size” is set to “S”, the zoom function has 3 magnifications (×1, ×2, ×4).• When “Picture Size” is set to “M”, the zoom function has 2 magnifications (×1, ×2).Selecting the Picture Size“Camera” → “Take Picture” → [Options] → “Picture Size”1. Select the desired picture size.Selecting the Picture Quality“Camera” → “Take Picture” → [Options] → “Picture Quality”1. Select “Normal” or “Fine”.Picture quality indicators:Fine:NormalSelecting the Anti-flicker Mode“Camera” → “Take Picture” → [Options] → “Anti-flicker”1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”.Note• Vertical stripes may occur on the picture due to the light source. Change the anti-flicker mode to rectify.• The digital camera uses a C-MOS sensor. Although this camera has been manufactured to the highest specifications, some pictures may still appear too bright or too dark.• If the phone has been left in a hot place for a long time before taking or registering a picture, the picture quality may be poor.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-42.png)
![42 CameraIn the Case of No Available MemoryWhen the number of pictures that can be taken becomes 3 or less, the remaining shots indicator in the upper left of the screen turns red. (The number of pictures that can be taken is approximate.)When the number of pictures that can be taken becomes 0, and when you try to take a picture again, “Memory full. Please delete some data!” is displayed.Adjusting the Brightness of the Picture According to Lighting ConditionsPress a or b to adjust the brightness of the picture.Picture brightness (exposure level) indicators : (Bright → Normal → Dark)Once the phone has returned to the standby screen, the brightness settings return to default.Viewing the Taken Pictures“Camera” → “Take Picture” → [Options] → “My Pictures”The list of pictures is displayed.1. Select the file you wish to view.The selected picture is displayed.Tip• Your pictures are given file names which are “pictureNNN.jpg” (NNN is a consecutive number).The file name (without an extension), date and size of your pictures are displayed in the list.Using the Timer (Delay Timer)“Camera” → “Take Picture” → [Options] → “Delay Timer”1. Select “On” or “Off”.“ ” or “ ” is displayed on the screen and the phone returns to digital camera mode.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-43.png)
![Camera 432.Press or the side-down key to start the delay timer.10 seconds after the timer sounds, the shutter sounds, and the camera takes a picture.Note• The countdown sounds whilst the delay timer is operating.• The flash light and the indicator flash whilst the delay timer is operating.• If or the side-down key is pressed whilst the delay timer is operating, the picture is taken instantly.• The zoom function with c or d, or brightness adjustment of the picture with a or b, is unavailable whilst the delay timer is operating.• If you wish to stop taking pictures with the timer, press [Cancel] whilst the delay timer is operating.Continuous ShootFour pictures are taken in succession. Auto Shoot and Manual Shoot are available.Continuous Shoot indicators“Camera” → “Take Picture” → [Options]→ “Continuous Shoot”1. Select “Auto Shoot” or “Manual Shoot”.Select “Off” to cancel.2. Press or the side-down key to start Continuous Shoot.Auto Shoot: Four pictures are taken in a row.Manual Shoot: Pictures are taken one by one by pressing or the side-down key.The taken pictures are saved automatically.To stop Continuous Shoot, press [Cancel].Note• When “Picture Size” is set to “L”, you cannot use the Continuous Shoot.• When you select a frame for taking pictures, you cannot use the Continuous Shoot function.• Delay timer cannot be used with the Manual Shoot.:When pictures are taken in Continuous Shoot mode, these indicators appear on the screen.* When delay timer and Continuous Shoot functions are simultaneously set, “ ” is displayed instead.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-44.png)
![44 CameraSelecting a FrameYou can select the frame from preset patterns. You can also select a frame in Saved Pictures.“Camera” → “Take Picture” → [Options] → “Add Frame”1. Select “Preset Frame” or “My Pictures”.2. Select the desired frame.The selected frame is confirmed on the display.3. Press .Note• When “Picture Size” is set to “L”, you cannot use the Frame function.• When you activate the Continuous Shoot, you cannot use the Frame function.•Only images in PNG format can be selected as the frame if you select “My Pictures” in step 1. However, images larger than the picture size which you select cannot be used.Selecting the Shutter SoundYou can select the shutter sound from 3 preset patterns.“Camera” → “Take Picture” → [Options] → “Shutter Sound”1. Select the desired shutter sound.To play back the shutter sound, press [Play].Note• Continuous Shoot uses the specialised shutter sound that cannot be changed for the above settings.Record VideoPut the phone into the video camera mode to record a video.Video clips are saved in “.3gp” format in the following two modes:Record size indicators: Message sending mode enabled: Extended video mode enabledRecording Video ClipsSound can be recorded with the video clip.“Camera” → “Record Video”The preview is displayed through the screen.1. Press or the side-down key to start recording the video clip.The sound for recording the video clip occurs.If you press or the side-down key again, or when the recording is completed, the sound for ending the video clip recording occurs and the display transits to step 2. (M 5-2)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-45.png)
![Camera 452. Select “Save”.“Saving (file name) to My Items…” is displayed, then the video clip is registered.To preview a video clip before saving, select “Preview”.To send a video clip by multimedia message after recording the video clip, select “Save and Send”.To record a video clip again, press [Cancel].Remaining sets indicator123 : Indicates the remaining sets of video clips that can be recorded.Tip• If you wish to use the auxiliary light, press R or the side-up key before step 1. Press it again to turn the light off. appears or disappears on the upper part of on the screen.Using the Zoom FunctionPress c or d to change the zooming ratio.Zooming ratio indicators: Magnification.Selecting the Recording Size ModeYou can select the recording size mode.“Camera” → “Record Video” → [Options] → “Record Size”1. Select “Extended Video” or “For Message”.Note• If “For Message” is selected, the size of the video clip that can be recorded depends on the message size set in MMS settings (p. 52).• When the Message Size described on page 52 is set to “100 KB”, “Record Size” is not displayed.• “Save and Send” is not displayed after recording in extended video mode.Selecting Video Quality“Camera” → “Record Video” → [Options] → “Video Quality”1. Select “Normal” or “Fine”.Video quality indicators:Fine:Normal](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-46.png)
![46 CameraSelecting the Anti-flicker Mode“Camera” → “Record Video” → [Options] → “Anti-flicker”1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”.Note• Vertical stripes may occur on the preview screen due to the light source. Change the anti-flicker mode to rectify.In the Case of No Available MemoryWhen the number of video clips that can be recorded becomes 3 or less, the remaining sets indicator in the upper left of the screen turns red. (The number of sets that can be recorded is approximate.)When the number of video clips that can be recorded becomes 0, and when you try to record a video clip again, “Memory full. Please delete some data!” is displayed.Adjusting the Brightness of the Video Clips According to Light ConditionsPress a or b to adjust the brightness of the video clip.Picture brightness (exposure level) indicators : (Bright → Normal → Dark)Once the phone has returned to the standby screen, the brightness settings return to default.Viewing Recorded Video Clips“Camera” → “Record Video” → [Options] → “My Videos”The list of video clips is displayed.1. Select the file you wish to view.2. Press .The selected video clip is played back.To pause playback, press .To resume playback, press again.To stop playback, press [Back].To display the video clip in its original size, press [×1].Tip• Your video clips are given file names such as “videoNNN.3gp” (NNN is a consecutive number). The file name (without an extension), date and size of your video clips are displayed in the list.• If the video clip has been recorded with sound, the volume can be adjusted by pressing a (or d/the side-up key) or b (or c/the side-down key).• The volume varies depending on the Multimedia Volume settings (p. 97). The sound is deactivated when “Multimedia Volume” is set to “Silent”.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-47.png)
![Camera 47Using the Timer (Delay Timer)To Record a Video Clip with the Timer“Camera” → “Record Video” → [Options] → “Delay Timer”1. Select “On” or “Off”.“ ” is displayed on the screen and the phone returns to video camera mode.2. Press or the side-down key to start the delay timer.10 seconds after the timer sounds, the camera starts recording the video clip.Note• The countdown sounds whilst the delay timer is operating.• If or the side-down key is pressed whilst the delay timer is operating, the video clip is recorded instantly.• The zoom function with c or d, or brightness adjustment of the video with a or b, is unavailable whilst the delay timer is operating.• If you wish to stop recording video clips with the timer, press [Cancel] whilst the delay timer is operating.Recording Video Clips with Sound“Camera” → “Record Video” → [Options] → “Voice Record”1. Select “On” or “Off”.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-48.png)
![48 MessagesMessagesYour phone allows you to send and receive text or multimedia and to receive WAP alerts.Multimedia (MMS)About Multimedia MessagingMultimedia Messaging Service (MMS) allows you to send and receive multimedia messages with graphical images, photographs, sound, animations or video clips attached.Note•Some MMS functions may not always be available depending on your network. Contact your network operator for more information.Creating a New MMSA → “Multimedia” → “Create Message”1. Enter the message.To use the text template, move the cursor to the point you wish to insert the template. Press [Options] and select “Text Options”. Select “Text Template” and then select the desired template.2. Select the desired recipient from the Contacts List entries.If the desired entry does not exist, select “Enter Number” or “Enter E-mail Address” and enter the phone number or E-mail address.3. Select “Send”.After the message is sent, the message is moved to the Sent box.Note• The current message size displayed whilst you are creating the message is an approximation.• If a message cannot be sent for some reason, the message stays in the Outbox and “ ” is displayed on the standby screen.Tip• To save the message without sending, select “Save to Drafts” instead in step 3.• To enter the subject, select “Subject” in step 3 and enter it. Up to 40 characters as the subject (and up to 20 recipients (for To and Cc)) can be entered. However, these may be limited depending on your network. In this case, you may not be able to send MMS. Contact your network operator for more information. (M 4) (M 4-2) (M 4-2-1)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-49.png)
![Messages 49• To add more recipients, select “Add Contact” in step 3. Select “To” or “Cc” and select the desired number of the recipient. Then enter the phone number or E-mail address.To Send a Message Template MMSYour phone provides message templates with an image and voice attachment that help you create MMS easily.A → “Multimedia” → “Create Message” → [Options] → “Message Template”A confirmation screen asking whether you wish to discard the current text is displayed.1. Confirm by selecting [Yes] or [No].2. Select the desired template.3. Enter the message.4. Select the desired recipient from the Contacts List entries.If the desired entry does not exist, select “Enter Number” or “Enter E-mail Address” and enter the phone number or E-mail address.5. Select “Send”.Note• Selecting “Message Template” deletes messages or images you have entered or attached. To prevent deletion, select “Message Template” first, then enter messages.Turning the Slide Show Setting On or OffA → “Multimedia” → “Settings” → “Slide Show”1. Select “On” or “Off”.If You Select “On”• You can create messages which have up to 10 slides. Each slide can contain one picture, one sound file and up to 1000 characters of text (up to the message total 30 KB or 100 KB limit).• If you wish to add a slide to a single slide, press [Options] and select “Add Slide”. If you wish to perform slide operations for multiple slides, press [Options] and select “Slide Control”.The slide control options available are:Add: To add a new slide.Remove: To remove the active slide.Previous: To navigate to the previous slide.Next: To navigate to the next slide.• Video clip data cannot be attached as slide data to the message.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-50.png)
![50 MessagesIf You Select “Off”• You can attach a maximum of 20 pictures, sounds or video clips and up to 2000 characters of text (up to the message total 30 KB or 100 KB limit).Inserting Attached DataYou can send pictures, sounds and video clips saved in the handset memory attached to multimedia messages. When attaching video clips, “Slide Show” must be set to “Off”.A → “Multimedia” → “Create Message” → [Options]1. Select from “Picture”, “Sound” or “Video”.2. Select from “Saved Pictures”, “Saved Sounds” or “Saved Videos”.3. Select the desired file.The selected picture/sound/video clip is attached.When attaching is complete, press [Back] to return to the message creation screen.• To add more files, press [Options] and select from “Add Picture”, “Add Sound” or “Add Video”. Then select from “Saved Pictures”, “Saved Sounds” or “Saved Videos”, and select the desired file.• To remove the attached files, press [Options] and select “Remove”.Note• Pictures/Sounds/Video clips protected with a copyright cannot be sent attached to a message.• Instead of performing step 2, you can send data recorded with “Take Picture”, “Record Voice” or “Record Video” options.Reading MMSMessages you receive are stored in the Inbox.Incoming MessagesThe MMS indicator ( ) will appear when you are receiving an incoming message.A → “Multimedia” → “Inbox”1. Select the message you wish to view.The message is displayed.2. Scroll the screen to read the message.3. Press when finished.Tip• The volume varies depending on the Multimedia Volume settings (p. 97). The sound is deactivated when “Multimedia Volume” is set to “Silent”.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-51.png)
![Messages 51Storing the Phone Number or E-mail Address of a Sender in the Contacts ListA → “Multimedia” → “Inbox”1. Highlight the message from which you want to store the phone number or E-mail address.2. Press [Options] and select “Save Sender”.For details on entering a name, see “Add New Contact” on page 33.Retrieving MMSA → “Multimedia” → “Inbox”When “ ” is in the Inbox, the following can be done.1. Highlight the alert you wish to download.2. Press [Options] and select “Download”.Tip• You can press instead of step 2 to start downloading.Confirming Arrival of Delivery ReportA → “Multimedia” → “Sent”1. Highlight the message of which you wish to confirm arrival of delivery report.2. Press [Options] and select “Delivery Report”.This menu is available only for sent messages that have the “Delivery Report” set to “On”. For details on selecting “Delivery Report”, see “Setting Up MMS”.Setting Up MMSA → “Multimedia” → “Settings”1. Select the item you wish to set up.• Roam. Download (Immediate, Deferred):Controls MMS download timing when roaming outside of your network.Immediate: Downloads MMS immediately from the server.Deferred: Asks if you would like to download from the server.• Delivery Rep. Allow (On, Off):Enables or disables Delivery Report when receiving a message which applies to the Delivery Report function.• Anonymous Reject (On, Off):Rejects a messages from an unknown or empty address name or not.• Auto Delete (Off, Inbox, Sent, Both):Deletes the oldest message automatically, when the Inbox, Sent or both (Inbox and Sent) is full.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-52.png)
![Messages 53See the note below for details.•Name •City• Additional Information• State/Province• Street & Number • Country• Postal Code5. Press [Options] and select “Send”.Note• Instead of performing step 1, you can use data taken with the “Take Picture” option.• The items Name, Street & Number and City are necessary to complete sending Postcards.• Information for a recipientName (mandatory):Name of the recipient for a postcard up to 50 charactersAdditional Information (optional):Additional information of the recipient up to 50 charactersStreet & Number (mandatory):Street and number up to 50 charactersPostal Code (optional):Postal code up to 20 charactersCity (mandatory):City up to 50 charactersState/Province:State, province, and region up to 50 charactersCountry (optional):Country up to 20 characters•The items displayed differ according to the service. Please contact your service provider for more information. When the item, “Country” is not displayed, you cannot send Postcards overseas.• Files in Animation GIF format cannot be used for the Postcards service.• The picture quality of Postcards varies depending on the picture size.Text (SMS)About Text MessagingThe Short Message Service (SMS) allows you to send text messages of up to 1024 characters to other GSM users.To Use SMS with Your PhoneMessages longer than 160 characters may be composed. During sending, the messages are split. If the receiver has a suitable phone the messages recombines during reception, if not your message appears as a number of separate 152 characters messages. (M 4-3)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-54.png)
![54 MessagesYou can send or receive SMS even if you are talking on the phone.You can also use Text Templates to help you compose SMS.Creating and Sending a New SMSA → “Text” → “Create Message”1. Enter your message.To use the text template, move the cursor to the point you wish to insert the template. Press [Options] and select “Text Template” and then select the desired template.2. Select the desired recipient from the Contacts List entries.If the desired entry does not exist, select “Enter Number” and enter the phone number.3. Select “Send”.The phone begins the sending process and the SMS is sent. After the message has been sent, the message is added to the Sent box.To save the message in the Drafts box without sending it, select “Save to Drafts”.Note• When you send a message of more than 160 characters, the confirmation message is displayed.Tip• To add more recipients, select “Add Contact” in step 3. Select an item number for adding the recipient’s phone number. Then enter the phone number.Reading SMSIncoming MessagesThe SMS indicator ( ) will appear when an incoming message arrives.1. When you receive a SMS, press during standby.2. Select the message you wish to view.The sender’s phone number and a part of the message are displayed. When the sender’s phone number is stored in the Contacts List, the sender’s name is displayed instead of the phone number.Messages that are marked with “ ” denote unread messages. If the Inbox, Sent box or Drafts box is full, “ ” is displayed. Delete unnecessary messages.3. Scroll the screen to read the message.4. Press F when finished. (M 4-3-1)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-55.png)
![Messages 55Extracting Phone Numbers from the Received Messages and Making a CallYou can make a call using the phone number embedded in the received SMS message.A → “Text” → “Inbox”1. Select the message from which you wish to extract phone numbers.2. Press [Options] and select “Extract Numbers”.Telephone numbers embedded in the message are displayed.3. Highlight the phone number.4. Press [Options] and select “Make Call”.To save this phone number in the Contacts List, select “Save Number”.Setting Up SMSTo Set Up the Service Centre AddressA → “Text” → “Settings” → “Message Centre”1. Enter the centre phone number.If you wish to enter a country code for a message to an international number, press and hold Q until a “+” sign is displayed.Message LifetimeThis indicates the number of days and hours for which a message you send may remain undelivered to the message recipient.During this period, the message service centre will continually try to deliver the message to the recipient.A → “Text” → “Settings” → “Message Lifetime”1. Select the validity period.Message FormatA → “Text” → “Settings” → “Message Format”1. Select the message format.Connection TypeA → “Text” → “Settings” → “Connection Type”1. Select the connection type. (M 4-3-5)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-56.png)
![56 MessagesOptimisationWhen set “On” (default), double-byte characters such as European characters with an accent are converted into single-byte characters and sent.When “Off”, double-byte characters are sent as displayed.Please note that you may be charged double for double-byte characters sent in an SMS when Optimisation is set “Off”.A → “Text” → “Settings” → “Optimisation”1. Select “On” or “Off”.E-mailAbout E-mail MessagingThe E-mail service allows you to send and receive E-mail messages. E-mail messages of up to 2000 characters can be sent. The size of the E-mail messages to be received depends on E-mail settings.Note• You cannot send E-mail messages with files attached. If you forward E-mail messages with files attached, the attached files are deleted.Creating a New E-mail MessageA → “E-mail” → “Create Message”1. Enter the message.2. Select the desired recipient from the Contacts List entries.If the desired entry does not exist, select “Enter E-mail Address” and enter the E-mail address.3. Select “Send”.After the message is sent, the message is moved to the Sent box.Note• If a message cannot be sent for some reason, the message stays in the Outbox.Tip• You can use the text template to make it easier to complete the message, and you can add your signature at the end of the message. To use the text template, move the cursor to the point you wish to insert the template. Press [Options] and select “Text Template”. Select the desired template. To add the signature, press [Options] and select “Add Signature”. Select the desired signature. (M 4-4)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-57.png)
![Messages 57• Select “Save to Drafts” instead in step 3 to save the message without sending.• Select “Subject” in step 3 to enter the subject. Up to 40 characters as the subject (and up to 30 recipients (for To, Cc and Bcc)) can be entered.• Select “Add Contact” instead in step 3 to add more recipients. Select “To”, “Cc” or “Bcc” and select or enter the desired address of the recipients.• If you wish to set the priority, select “Priority” instead in step 3 and select “Urgent” or “Normal”.Reading an E-mail MessageIncoming MessagesThe E-mail indicator ( ) will appear when you are receiving an incoming message.A → “E-mail” → “Inbox”1. Select the message you wish to view.2. Scroll the screen to read the message.Tip•If you wish to download E-mail messages, press A during standby and then select “Check E-mail”.Storing the E-mail Address of a Sender in the Contacts ListA → “Multimedia” → “Inbox”1. Highlight the message from which you want to store the E-mail address.2. Press [Options] and select “Save Sender”.For details on entering a name, see “Add New Contact” on page 33.Setting Up E-mailA → “E-mail” → “Settings”1. Select the item you wish to set up.• Download Size (Whole Message, First 20KB):Controls the download size of the E-mail. The “Whole Message” option is limited to a maximum of 100 KB.•Edit Signature:Opens the text template screen to edit the signature.• Auto Delete (Off, Inbox, Sent, Both):Deletes the oldest message automatically when the Inbox, Sent or both (Inbox and Sent) is full.• Reply Message (Incl. Original Mail, Excl. Original Mail):Includes or excludes the original message when replying. (M 4-4-7)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-58.png)
![58 MessagesCell BroadcastsYou can receive Cell Broadcast messages or general messages such as weather forecasts and traffic reports. This information is broadcasted to subscribers in certain network areas.This function may not be available on all mobile phone networks. Contact your network operator for more information.Enabling/Disabling Cell BroadcastsA → “Cell Broadcasts” → “Switch On/Off”1. Select “On” or “Off”.Reading Cell Broadcast MessagesA → “Cell Broadcasts” → “Read Messages”1. Select the desired subject.2. Scroll the screen to read the message.3. Press [Back].Setting LanguagesYou can select your preferred language for the cell broadcast message display.A → “Cell Broadcasts” → “Settings” → “Language”The current language is displayed.1. Press .The language list is displayed.2. Select the desired language.3. Press [Save].Subscribing to Cell BroadcastsSelect the page of the cell broadcast message that you want.A → “Cell Broadcasts” → “Settings” → “Set Info Subjects”1. Select “Add/Remove”.2. Select the desired page.3. Press [Save].Tip• If the desired page is not in the list that appears in step 2, select “Create Subject” in step 1, then enter the subject code to add a page. For details on the subject code, contact your service provider. (M 4-8) (M 4-8-1) (M 4-8-2)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-59.png)
![60 Vodafone live!Navigating a WAP Page•a b c d:Move the highlights around in the screen.• : Executes the option displayed in the lower centre of the screen.•A: Launches browser option menu.•C: Selects an action displayed in the lower right corner of the screen.Used to access “Vodafone live!” by opening the browser.•Q (press and hold):Starts the “Go to URL”.•G to O (press and hold):Starts the Bookmark (WAP).•F: Exits the browser (short press).Turns off the phone. (press and hold)Browser MenuWhen you are browsing, you can reach browsing options by pressing [Options].• Select:Selects the link you wish to see. (“Select” is displayed only when the link is highlighted.)•Home:Goes to the homepage you set in the WAP Settings.• Add bookmark:Adds the site you are currently browsing to your list of bookmarks.• View bookmarks:Displays a list of bookmarks.• Save items:Saves pictures, sounds or video clips in the appropriate My Items folder.•Go to URL:Inputs the URL of the site you wish to go to.•History:Displays a history list.• Forward:Moves to the next URL in the history list.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-61.png)
![Vodafone live! 61• Reload page:Refreshes the contents of the WAP page.• Advanced...:• Show URL:Displays the URL of the site you are currently browsing.• Save page:Saves the page you are currently browsing to your list of Snap Shots.• Snapshots:Displays a list of Snap Shots.• Alert inbox:Displays a list of WAP push messages. You can receive push messages via WAP Services. This means that a service provider sends WAP content to your phone, without any set up.•Settings:Includes “Downloads”, etc.• Security:Sets the security.• Clear...:Clears history, cache, etc.• Restart Browser:Restarts the browser.BookmarksWhen you are browsing, press [Options] and select the appropriate option.To Add a Bookmark1. Select “Add bookmark”.To Access Bookmarked Pages1. Select “View bookmarks”.2. Select the desired bookmark.To Edit Bookmarks1. Select “View bookmarks”.2. Select “More…”.3. Highlight a bookmark page you wish to edit.4. Press [Options] and select “Details”.5. Edit the title, then press b.6. Edit the URL, then press b.7. Select “Save”.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-62.png)
![62 Vodafone live!To Delete Bookmarks1. Select “View bookmarks”.2. Select “More…”.3. Highlight a bookmark page you wish to delete.4. Press [Options] and select “Delete”.5. Press [Options] and select “OK”.Setting the Hotkeys to Web Page BookmarksYou can access Web pages quickly by pressing the shortcut keys (hotkeys). Follow the following to assign shortcuts.1. Select “View bookmarks”.2. Select “More…”.3. Highlight a bookmark page you wish to edit.4. Press [Options] and select “Hotkeys”.The list of hotkeys is displayed.5. Select the number to which you wish to assign hotkeys.The list of registered bookmarks is displayed.6. Select the desired bookmark.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-63.png)
![My Items 63My ItemsMy Items contains several types of picture, sound and video clip data. Also included in My Items are frequently used text message phrases and accessed WAP pages (addresses) which you can use. You can also transmit picture, sound and video clip data via infrared or Bluetooth wireless technology to OBEX-enabled phones.Note• The phone can store approximately 2100 KB of data across Pictures, Games & More, Sounds and Videos.PicturesPictures that are taken by a digital camera or images that are downloaded from mobile Internet sites can be managed. You can register pictures in the following formats: JPEG, PNG, BMP, GIF, WBMP, and WPNG.Viewing Pictures“My Items” → “Pictures” → “Saved Pictures”1. Select the file you wish to view.The selected picture is displayed.Using Images as Wallpaper“My Items” → “Pictures” → “Saved Pictures”The list of pictures is displayed.1. Highlight the file you wish to use as wallpaper.2. Press [Options] and select “Set as Wallpaper”.3. Specify the area you wish to display using the navigation keys. (M 6) (M 6-1)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-64.png)
![64 My ItemsSaving to Contacts ListYou can use this option only for pictures saved in the handset memory.“My Items” → “Pictures” → “Saved Pictures”1. Highlight the file you wish to add to Contacts List.2. Press [Options] and select “Add to Contact”.To overwrite, select “Existing Contact” and select the data you wish to save to.If the picture size exceeds 120 dots in width or 160 dots in height, specify the area you wish to display.To save as a new entry, select “New Contact”.For details on entering a name, see “Add New Contact” on page 33.Editing Pictures“My Items” → “Pictures” → “Saved Pictures”1. Highlight the file you wish to edit.2. Press [Options] and select “Edit”.3. Select the desired option:“Rotate”: The picture is rotated 90º anticlockwise. Press [Rotate] again for another 90º.“Adjust Size”: Select the desired option.“Retouch”: Select the retouching option.“Add Frame”: Select the desired frame pattern.“Add Stamps”: Press [Stamps] and select the desired stamp pattern. Repeat this step to add more patterns.Note• The size of pictures that you can retouch is 52 dots [W] × 52 dots [H] minimum.• The size of pictures that you can add stamps to is 48 dots [W] × 48 dots [H] minimum.• Images exceeding 240 [W] or 320 [H] are saved as 240 [W] × 320 [H] regardless of the original size.• “Adjust Size” may not be available depending on the original picture and copyright issued.Sending a Picture File“My Items” → “Pictures” → “Saved Pictures”1. Highlight the file you wish to send.2. Press [Options] and select “Send”.3. Select “As Multimedia” or “As Postcard”.For details on creating a message, see “Creating a New MMS” on page 48.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-65.png)
![My Items 65Note• The Postcard service is not available with some service providers. Please contact your service provider for more information.• Pictures protected with a copyright cannot be sent attached to a message.Tip• For details on transmitting My Items data, see “Sending My Items Data” on page 69.Uploading Picture FilesYou can upload your pictures to the Media Album.Note• This service is not available with some service providers. Please contact your service provider for more information.“My Items” → “Pictures” → “Saved Pictures”1. Highlight the file you wish to upload.2. Press [Options] and select “Send”.3. Select “To Album”.4. Press [Yes].Note• Pictures protected with a copyright cannot be uploaded.Downloading Picture Files“My Items” → “Pictures” → “More Pictures”The picture file download site is displayed.Games & MoreAlong with the preloaded application, downloaded applications are stored in Applications.Note• Applications can store up to 50 applications.Using ApplicationsVarious kinds of Vodafone specific applications can be used in this phone.To use applications, download the applications via the mobile Internet.Some applications offer the ability to connect to a network either within a game or network based application.Note• Applications may be both local (no connectivity) and network based (using the mobile Internet to update information/play games). The network may charge you more for using network-based applications. Please contact your service provider for more information. (M 6-1-3) (M 6-2)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-66.png)
![My Items 67Tip• SMAF (Synthetic music Mobile Application Format) is a format of music data for mobile phones.Playing Back Sound Files“My Items” → “Sounds” → “Saved Sounds”1. Select the file you wish to play back.To stop playback, press .Note• The volume varies depending on the Multimedia Volume settings (p. 97). The sound is deactivated when “Multimedia Volume” is set to “Silent”. To adjust the volume, press a (or d/the side-up key) or b (or c/the side-down key).Using the Sound Files as Ringtone“My Items” → “Sounds” → “Saved Sounds”1. Highlight the file you wish to use as ringtone.2. Press [Options] and select “Set as Ringtone”.The selected sound is automatically used for the ringtone of the current Profiles.Note• Files in AMR or WAVE format cannot be used for the ringtone.Sending a Sound File with MMS“My Items” → “Sounds” → “Saved Sounds”1. Highlight the file you wish to send.2. Press [Options] and select “Send”.3. Select “As Multimedia”.For details on creating a message, see “Creating a New MMS” on page 48.If you select a sound file created with the Melody Editor, add the following step 4. 4. Select the file format “SMAF”, “MIDI” or “i Melody”.Note• Sounds protected with a copyright cannot be sent attached to a message.• Only the first part of the data is converted if you select “i Melody” in step 4.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-68.png)
![68 My ItemsUploading Sound FilesYou can upload your sounds to the Media Album.Note• This service is not available with some service providers. Please contact your service provider for more information.“My Items” → “Sounds” → “Saved Sounds”1. Highlight the file you wish to upload.2. Press [Options] and select “Send”.3. Select “To Album”.If you select your original ringtone in step 1, perform the following, otherwise go to step 5.4. Select the file format “SMAF”, “MIDI” or “i Melody”.5. Press [Yes].Note•Sounds protected with a copyright cannot be uploaded.Downloading Sound Files“My Items” → “Sounds” → “More Sounds”The sound file download site is displayed.VideosVideo clips that are recorded by a video camera or video clips that are downloaded from mobile Internet sites can be managed.Playing Back Video Clip Files“My Items” → “Videos” → “Saved Videos”1. Select the file you wish to play back.2. Press .To resume, press again.To stop playback, press [Back].To return to the original size, press [×1].Note• The volume varies depending on the Multimedia Volume settings (p. 97). The sound is deactivated when “Multimedia Volume” is set to “Silent”. To adjust the volume, press a (or d/the side-up key) or b (or c/the side-down key). (M 6-3-4) (M 6-4)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-69.png)
![My Items 69Sending a Video Clip File with MMS“My Items” → “Videos” → “Saved Videos”1. Highlight the file you wish to send.2. Press [Options] and select “Send”.3. Select “As Multimedia”.For details on creating a message, see “Creating a New MMS” on page 48.Note• Video clips protected with a copyright cannot be sent attached to a message.Uploading Video Clip FilesYou can upload your video clips to the Media Album.Note• This service is not available with some service providers. Please contact your service provider for more information.“My Items” → “Videos” → “Saved Videos”1. Highlight the file you wish to upload.2. Press [Options] and select “Send”.3. Select “To Album”.4. Press [Yes].Note• Video clips protected with a copyright cannot be uploaded.Downloading Video Clip Files“My Items” → “Videos” → “More Videos”The video clip file download site is displayed.Sending My Items DataChoose the appropriate menu.“My Items” → “Pictures” → “Saved Pictures”“My Items” → “Sounds” → “Saved Sounds”“My Items” → “Videos” → “Saved Videos”1. Highlight the desired file.2. Press [Options] and select “Send”.3. Select “Via Bluetooth” or “Via Infrared”.For “Via Bluetooth”The phone starts searching for Bluetooth wireless technology enabled devices within 10 metres.When detected, a list of enabled devices is displayed allowing you to select the desired device. The connection can be established and the file is sent. (M 6-4-3)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-70.png)
![70 My ItemsFor “Via Infrared”The phone starts searching for an infrared-enabled device within 20 centimetres.When detected, the infrared connection is established and the file is sent.Note• Pictures/Sounds/Video clips protected with a copyright cannot be sent.• When pairing, you need to enter your passcode when establishing contact with a Bluetooth wireless technology enabled device for the first time.Receiving the My Items DataWhen the phone receives the My Items data, a confirmation message appears.1. Press [Yes].The received data is registered in the corresponding My Items folder.Press [No] to reject.Tip• For details on Infrared or Bluetooth wireless settings, see “Connectivity” on page 90.Text TemplatesYou can register up to 20 text templates for use in text messages and multimedia messages.120 characters may be registered in any text template.Adding Phrases to Text Templates“My Items” → “Text Templates”1. Select the number you wish to register.2. Enter the text and press .Editing Text Templates“My Items” → “Text Templates”1. Highlight the text template you wish to edit.2. Press [Options] and select “Edit”.3. Enter new text and press .Viewing Text Templates“My Items” → “Text Templates”The list of Text Templates is displayed.1. Highlight the text template you wish to view.2. Press [Options] and select “View”. (M 6-5)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-71.png)
![My Items 71Deleting Text Templates“My Items” → “Text Templates”1. Highlight the text template you wish to delete.2. Press [Options] and select “Delete”.Memory StatusThis function helps you to check the memory status of My Item. Memory status covers Applications, Pictures, Sounds, and Videos.“My Items” → “Memory Status” (M 6-7)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-72.png)
![72 Games & MoreGames & MoreApplicationsThe list of Java™ applications is displayed.Downloaded applications are displayed in order starting from the latest one.Executing ApplicationsFor details on executing applications, see “Executing Applications” on page 66.Showing Application Details“Games & More” → “Applications”1. Highlight the desired Java™ application.2. Press [Options] and select “Application Details”.The detailed information is displayed.Setting PermissionWhen using Java™ applications that access the network, online security for monetary transactions can be set with this option.To Select the Function and Confirmation Method“Games & More” → “Applications”1. Highlight the desired Java™ application.2. Press [Options] and select “Permission”.3. Select “Network Access” to set how the Java™ application accesses the network.4. Select the desired confirmation method.Always Connect:Allows the Java™ application access without confirmation.First Time: Informs you when the Java™ application accesses the network for the first time. If access is allowed, no more confirmations are made until you delete the application.Per Session: Informs you when the Java™ application accesses the network for the first time. If access is allowed, no more confirmations are made until the application finishes operation.Per Access: Informs you every time the Java™ application accesses the network regardless of whether or not access is allowed.Never Connect: Prevents the Java™ application from accessing the network and no confirmation is made. (M 1) (M 1-1)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-73.png)
![Games & More 73To Reset PermissionsYou can reset all permissions you made“Games & More” → “Applications”1. Highlight the desired Java™ applications.2. Press [Options] and select “Permission”.3. Select “Reset Permissions”.ScreensaversYou can download screensaver applications for the standby screen.“Games & More” → “Screensavers” → “Switch On/Off”1. Select “On” or “Off”.Note• If you select “On” and a screensaver application is not set, a list displaying available screensavers appears, asking you to make a selection.Set Application“Games & More” → “Screensavers” → “Set Application”The downloaded applications are displayed.1. Select the desired screensaver application.Resume TimeYou can set the time period for the screensaver application to activate.“Games & More” → “Screensavers” → “Resume Time”1. Enter the resume time in two digits using the digit key.More GamesYou can download applications.“Games & More” → “More Games”The application download site is displayed.1. Select the application you wish to download.The WAP browser is started and a confirmation message will appear asking to confirm download.2. Press to start downloading.3. Press when finished. (M 1-2) (M 1-2-2) (M 1-2-3) (M 1-3)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-74.png)
![76 ApplicationsApplicationsSIM ApplicationYou can refer to the information on the SIM. Contact your service provider for further details.AlarmsSetting the AlarmsThe alarm function allows you to be alerted at a specified time.Note that the alarm may not function correctly if the clock has not been set.Note• The alarm functions even if the phone is switched off.• The alarm will not ring when “Ringer Volume” (p. 93) is set to “Silent”.“Applications” → “Alarms”1. Select the blank setting.2. Enter the desired time.To Change the Type of Alarm Tone3. Select “Set Alarm Tone”.4. Select “Tone”.5. Select “Preset Sounds” or “My Sounds”.6. Select the desired tone.For details on selecting a tone, see “Assigning Ringtone” on page 94.To Change the Vibration of Alarm Tone7. Select “Vibration”.8. Select “On”, “Off” or “On & Link to Sound”.For details on selecting a vibration, see “Vibration” on page 94.To Change the Duration of Alarm Tone9. Select “Duration”.10.Enter the desired time (02-59).11.Press [Back].To Set the Repeating Option12.Select “Repeat Daily”.13.Select “On” or “Off”.14.Press [Save]. (M 3) (M 3-1) (M 3-2)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-77.png)
![Applications 77Editing the Alarm Setting“Applications” → “Alarms”1. Select the desired setting and edit it.Resetting an Alarm Setting“Applications” → “Alarms”1. Select the alarm you wish to reset.2. Select “Reset Alarm”.Resetting All Alarm Settings“Applications” → “Alarms” → “Clear All”Deactivating or Activating an Alarm“Applications” → “Alarms”1. Highlight the alarm you wish to deactivate or activate.2. Press [Options] and select “Switch Off” or “Switch On”.CalculatorThe calculator function performs the 4 arithmetic calculations using up to 12 digits.“Applications” → “Calculator” → “Calculator”The calculator is displayed on the display.Key operations for calculation are as follows.To enter a decimal point, press R.To clear the entered number or operand, press [Clear].To do the calculations, press .To start a new calculation, press [Clear]. (M 3-3)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-78.png)
![78 ApplicationsRate ConversionYou can also use the calculator as a currency calculator to convert from/to a home currency using a conversion rate that you enter.To Set a Currency Conversion Rate“Applications” → “Calculator” → “Exchange Rate”1. Select “Foreign -> Domestic” or “Domestic -> Foreign”.2. Enter the currency conversion rate.To delete all digits, press [Clear].To Convert a Value“Applications” → “Calculator” → “Calculator”1. Enter the value to be converted.2. Press [Options] and select “In Domestic” or “In Foreign”.The result is displayed.If you select “Exchange Rate” in step 2, you can set a currency conversion rate.Note• You cannot perform step 2 when an arithmetic symbol (+, −, × or ÷ ) is displayed.Voice RecorderThis allows you to record a voice clip of up to 60 seconds, which can be used to remind you of schedule entries or be sent within a multimedia message. The recorded voice clip is registered in Saved Sounds. Voice clips are saved in “.amr” format.Recording a Voice Clip“Applications” → “Voice Recorder”1. Press to start recording.To stop recording before the recording time is over, press .2. Select “Save” to save the voice clip.To play back the recorded voice clip, select “Playback”.To record a voice clip again, press [Cancel].Note• To change recorded size before recording, press [Options] and select “Record Size”. Then select “Extended Voice” or “For Message”.• When the Message Size described on page 52 is set to “100 KB”, “Record Size” is not displayed. (M 3-3-2) (M 3-4)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-79.png)
![80 Applications4. Press the digit keys to specify the musical scale and rest.For details on specifying the sound level and rest, see “To Specify the Musical Scale and Rest” on page 81.5. Press P or R to specify the types of musical notes or rest.For details on specifying the musical notes and rest, see also “To Specify the Types of Notes and Rests” on page 81.6. Press d after inputting one note.Input the next note after the cursor moves to the right.7. Repeat steps 4 to 6 to input notes.When entering notes, you can do the following:• Press to play back all input notes.• Press [Options] and select:“Play before Cursor” to play back notes up to the cursor position.“Select Part” to select another chord.“Set Tone” to set or change the tone using different instruments. (p. 82)“Set Strength” sets the strength of the tone. (p. 82)8. When you finish inputting, press [Options] and select “Save”.9. Select “Save to My Items”.Note• The volume varies depending on the Multimedia Volume settings (p. 97). The sound is deactivated when “Multimedia Volume” is set to “Silent”.• If the capacity or memory in Saved Sounds becomes insufficient, the message, “Maximum capacity : 250 Not registered.” or “Memory full. Please delete some data!” is displayed. The screen returns to step 9. Try again after deleting unnecessary data.• Melodies consisting of too many short notes (semiquavers and triplets) cannot be played back in step 8 and the following message is displayed: “Can not play due to too many notes per sec.” The screen returns to step 5. The message “Can not save due to too many notes per sec.” may also be displayed, and the screen returns to step 5.Reduce the number of melodies, replace short notes, cancel triplets, etc. to remedy.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-81.png)
![82 ApplicationsIf the cursor is positioned next to a note, you can repeat the note immediately left of the cursor when a or b is pressed.To Set the ToneThe phone can play notes using different instruments.You can select from 128 basic tones (8 types of: Pianos, Chimes, Organs, Guitars, Basses, Strings 1, Strings 2, Brasses, Reeds, Flutes/Pipes, Synth Leads, Synth Pads, Synth Effects, Ethnics, Percussions, and Effects) and 61 extended tones (40 types of Drums (FM) and 21 types of Drums (WT)).1. Press [Options] and select “Set Tone” in step 7 on page 80.2. Press c or d to highlight a category of the tone.3. Press a or b to highlight a tone.4. Press .Now you can create an original ringtone.Tip• You can play back the melody in the selected tone by pressing [Options] and select “Play Current Part” in step 4, or play back the syllable names in the selected tone by selecting “Confirm Tones” instead.To Set the Strength of the ToneThe strength of the tone can be set in 3 levels for each part.When you purchase this phone, the strength of the tone is set to “Loud”.1. Press [Options] and select “Set Strength” in step 7 on page 80.2. Select a strength of the tone.Now you can create an original ringtone.Editing Original Ringtones“Applications” → “Melody Editor” → “My Sounds”1. Highlight an original ringtone you wish to edit.2. Press [Options] and select “Edit Melody”.3. Edit the title.4. Select a tempo and number of voices.5. Edit the data.6. When you finish editing, press [Options] and select “Save”.7. Select “Save to My Items”.8. Select “Overwrite” or “New”. (M 3-5-2)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-83.png)
![Applications 83Note• When the number of voices is modified in step 4, a confirmation message may be displayed. When you press [Yes], a section of the melody may be deleted.Tip• You can delete the melody after or before the cursor by pressing [Options] and selecting “Delete after Cursor” or “Delete before Cursor”.Copying and Pasting NotesYou can copy and move a part of the melody to another position.Only original ringtones or editable melodies can be copied or moved.1. In the Score input screen, press [Options] and select “Copy” or “Cut”.2. Move the cursor to the first note to be copied or to be cut.3. Move the cursor to the last note to highlight the area.4. Press [Options] and select “Paste”.5. Move the cursor to the point you wish to paste the notes.Phone HelpYou can view the help list and use it to guide you in the phone’s functions.“Applications” → “Phone Help”1. Press a or b. (M 3-6)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-84.png)
![84 CalendarCalendarCalendar allows you to easily schedule appointments, which are associated with the date and time.These entries can also be sent via infrared or Bluetooth wireless technology to a PC to share the same schedules.Creating a New Entry“Calendar”1. Highlight the desired day to which you want to add an event.2. Press [Options] and select “Add New Entry”.3. Enter the subject.4. Enter the location.5. Select the desired category.6. Enter the start date.7. Enter the start time.8. Select the desired duration.9. Select the desired reminder option.Note• The reminder functions even if the phone is switched off.• The reminder will not sound when “Ringer Volume” (p. 93) is set to “Silent”.• When selecting “Other” in step 9, you can enter the desired date and time. (M 7)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-85.png)
![Calendar 85Editing the Reminder Tone“Calendar”1. Select the day including schedule entries the reminder tone of which you wish to edit.2. Highlight the desired entry.3. Press [Options] and select “Edit”.4.Select the reminder field and select the desired option.If you select “No Reminder”, the reminder is turned off.5.Select “Tone” and select “Preset Sounds” or “My Sounds”.6. Select the desired tone.For details on selecting a tone, see “Assigning Ringtone” on page 94.7. Select “Vibration” and select from “On”, “Off” or “On & Link to Sound”.For details on selecting a vibration, see “Vibration” on page 94.8. Select “Duration” and enter the desired time.9. Press [OK].10. Press [Save].Sending a Schedule Entry“Calendar”1. Select the day including schedule entries you wish to send.2. Highlight the desired entry you wish to send.3. Press [Options] and select “Send”.4. Select “Via Bluetooth” or “Via Infrared”.For “Via Bluetooth”The phone starts searching for Bluetooth wireless technology enabled devices within 10 metres.When detected, a list of enabled devices is displayed allowing you to select the desired device. The connection can be established and the entry is sent.For “Via Infrared”The phone starts searching for an infrared-enabled device within 20 centimetres.When detected, the infrared connection is established and the entry is sent.Note• When pairing, you need to enter your passcode when establishing contact with a Bluetooth wireless technology enabled device for the first time.Receiving a Schedule EntryWhen the phone receives a schedule entry, a confirmation message appears.1. Press [Yes].The received entry is registered in the Calendar.Press [No] to reject.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-86.png)
![86 CalendarTip• For details on making Infrared or Bluetooth wireless settings, see “Connectivity” on page 90.Viewing an Entry“Calendar”1. Select the day including schedule entries you wish to view.The list of entries is displayed.2. Select the desired entry.Press d to switch entries, if available, in the selected day.To Search By Date1. In the monthly or daily view, press [Options].2. Select “Go to”.3. Select “Today” to display today or “Enter date” to enter the desired date.To Search By Subject1. In the monthly or daily view, press [Options].2. Select “Find”.3. Enter the desired text.To Change the Week Format1. In the monthly view, press [Options].2. Select “Week Format”.3. Select “Monday-Sunday” or “Sunday-Saturday”.Deleting Entries1. In the monthly or daily view, press [Options].2. Select “Delete”.3. Select the desired option.• “This Entry” (daily view only): Deletes the selected entry.• “All this Day”: Deletes all entries for the selected day.• “All this Month”: Deletes all entries for the selected month.• “Up to Last Month”:Deletes all entries before this month.• “All Entries”: Deletes all entries in this application.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-87.png)
![Contacts 87ContactsCall LogThe phone will record the last 10 missed calls, received calls and dialled numbers.Viewing Call Log“Contacts” → “Call Log”1. Select the category from “All Calls”, “Dialled Numbers”, “Missed Calls” or “Received Calls”.The selected call log list is displayed.To switch logs, press c or d.2. Select the phone number you wish to view.If you wish to dial the number, press D.Tip• You can also confirm call logs by pressing D during standby mode.Sending Messages1. In call log list, highlight the call log you wish to send a message to.2. Press [Options] and select “Create Message”.3. Select “Multimedia”, “Text” or “Postcard”.For details on creating a message, see “Creating a New MMS” on page 48 or “Creating and Sending a New SMS” on page 54.Note• The Postcard service is not available with some service providers. Please contact your service provider for more information.Deleting a Call Log1. In call log list, highlight the call log you wish to delete.2. Press [Options] and select “Delete”. (M 8) (M 8-3)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-88.png)
![90 SettingsSettingsConnectivityBy configuring the settings in this menu, you can connect to Bluetooth wireless technology or infrared enabled phones via these connections, as well as a PC via Bluetooth wireless technology, infrared or USB connections.Using the Bluetooth Wireless FunctionTo Turn On or Off“Settings” → “Connectivity” → “Bluetooth” → “Switch On/Off”1. Select “On” or “Off”.If the infrared setting has been activated, you will be asked whether you wish to deactivate it or not. Press [Yes].The Bluetooth wireless setting is activated, and “ ” is displayed.Tip• You can turn the Bluetooth wireless function on or off by pressing , then R during standby.To Search for Devices to be PairedFor using the Bluetooth wireless function, you need to search for other Bluetooth wireless technology enabled devices to establish contact with your phone. Keep your phone within a distance of 10 metres before searching.“Settings” → “Connectivity” → “Bluetooth” → “Search for Devices”The phone starts searching for devices within 10 metres.1. Select the desired device for pairing.2. Enter the device passcode.Note• If the Bluetooth wireless function is off before searching, the phone turns the Bluetooth wireless function on automatically and starts searching.• If the infrared function is active, the confirmation screen to deactivate the infrared function is displayed. Press [Yes] to deactivate.• You can only select one device for pairing. To change the paired device, see “Handsfree Devices” on page 91. (M 9) (M 9-1) (M 9-1-1)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-91.png)
![Settings 91Handsfree DevicesYou can activate, rename, and delete the paired handsfree device in the list.To Activate a Device“Settings” → “Connectivity” → “Bluetooth” → “Handsfree Devices”1. Select the device you wish to activate.Tip• You can save battery power by turning the Bluetooth wireless function off whilst it is not in use. Turn the Bluetooth wireless function off in “To Turn On or Off” on page 90 or in “To Turn Off Automatically” on page 92.• During a call, you can divert voice call to the paired device. Press [Options] and select “Enable Bluetooth”. If you wish to disconnect the paired device, select “Disable Bluetooth”.To Rename a Device“Settings” → “Connectivity” → “Bluetooth” → “Handsfree Devices”1. Highlight the device you wish to rename.2. Press [Options] and select “Change Name”.3. Rename the device.To Clear a Device Name“Settings” → “Connectivity” → “Bluetooth” → “Handsfree Devices”1. Highlight the device you wish to clear.2. Press [Options] and select “Delete”.Paired DevicesYou can rename and delete the paired device in the list.Bluetooth Wireless SettingsWith this setting you can rename your phone, prevent other GX25 phones from recognising your phone, turn the Bluetooth wireless function off automatically to save battery power, etc.To Rename Your PhoneYou can rename your phone. The name is shown in other devices when your phone is detected.“Settings” → “Connectivity” → “Bluetooth” → “Bluetooth Settings” → “Device Name”1. Enter the new device name.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-92.png)
![92 SettingsTo Show or Hide Your Phone“Settings” → “Connectivity” → “Bluetooth” → “Bluetooth Settings” → “Visibility”1. Select the desired visibility settings.“Show My Phone”: Allows other devices to recognize your phone.“Hide My Phone”: Hides your phone from other devices.To Turn Off Automatically “Settings” → “Connectivity” → “Bluetooth” → “Bluetooth Settings” → “Bluetooth Time Out”1. Select the desired time.Your phone turns the function off automatically in the specified time.Using the Infrared Function“Settings” → “Connectivity” → “Infrared”1. Select “On” or “Off”.If the Bluetooth wireless function has been activated, you will be asked whether you wish to deactivate it or not. Press [Yes].“ ” will appear on the screen.The infrared setting will return to off when no data is transmitted/received via infrared communication.PC SoftwareBy connecting your phone to a PC, you can transmit pictures, sounds, video clips, and Contacts List entries. Follow the procedure to select the connection method (Bluetooth wireless, USB or Infrared connection). For details on getting the link software, see page 114. “Settings” → “Connectivity” → “PC Software”1. Select the desired connection type from “Data Cable”, “Infrared” or “Bluetooth”. (M 9-1-2) (M 9-1-3)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-93.png)
![Settings 93ProfilesTone sound and vibration set can be customised for each profile according to your environment.There are 6 profiles including one user definable profile: Normal, Meeting, Activity, Car, Headset and Silent.Activating a Profile“Settings” → “Profiles”1. Select the desired profile.Note• When a profile is set, the corresponding icon described on page 16 is displayed on the standby screen.Tip• Press and hold R to switch Profiles settings between Normal and Silent mode during standby.Customising Profiles“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select the setting you wish to customise and change as desired.For details about settings, pages 93 to 98.4. Press [Save] when finished.Resetting Profile Settings“Settings” → “Profiles”1. Highlight the profile you wish to reset.2. Press [Options] and select “Set to Default”.3. Enter your handset code.The default handset code is “0000”. For details on changing the handset code, see “To Change Handset Code” on page 112.Ringer VolumeYou can adjust the ringer volume to one of 6 levels or a step tone.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”. (M 9-2)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-94.png)
![94 Settings3. Select “Ringer Volume”.The current volume level is displayed.4. Press a (or d) to increase the ringer volume or press b (or c) to decrease the ringer volume and then press .To select “Step Tone”, press a (or d) at level 5.To select “Silent”, press b (or c) at level 1.Assigning RingtoneYou can select the ringtone from 28 tones including 5 patterns, 3 alerts, 10 sound effects and 10 melodies. You can also select a sound in Saved Sounds as the default ringtone excluding the AMR or WAVE format.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Assign Ringtone”.4. Select “Preset Sounds” or “My Sounds”.5. Select the ringtone you wish to use.To hear the demo play, press . To stop playing, press again.6. Press [Options] and select “Assign”.Note• If you delete a ringtone that uses a sound in Saved Sounds, the default ringtone is set.VibrationWhen the vibrator option is set on, the phone will vibrate for incoming calls regardless of the ringer volume and tone settings.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Vibration”.4. Select from “On”, “Off” or “On & Link to Sound”.Tip• When the “On & Link to Sound” option is selected in step 4, the vibrator synchronises with your selected melody to pulse in time with the melody. Please note that not all melodies support the “On & Link to Sound” option. Should you select such a melody, only the “On” option in step 4 will allow vibrator function.• When you select “On” or “On & Link to Sound” in step 4, “ ” is displayed on the standby screen.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-95.png)
![Settings 95LightWhen the light option is on, the mobile light turns on whilst the phone receives a call.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Light”.4. Select from “On”, “Off” or “On & Link to Sound”.Tip• When the “On & Link to Sound” option is selected in step 4, the lighting synchronises with your selected melody and pulses in time with the melody. Please note that not all melodies support the “On & Link to Sound” option. Should you select such a melody, only the “On” option in step 4 will allow the light function.AlertsYou can personalise profiles for alerts including warning tone, message alert and low battery alert.Warning ToneYour phone emits the warning tone when an error occurs.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Alerts”.4. Select “Warning Tone”.5. Select “Switch On/Off”.6. Select “On” or “Off”.7. Select “Volume” and select from “High”, “Middle” or “Low”.8. Select “Tone” and select “Preset Sounds” or “My Sounds”.9. Select the desired tone.For details on selecting a tone, see “Assigning Ringtone” on page 94.10. Select “Duration” and select the desired time.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-96.png)
![96 SettingsMessage AlertWhen receiving messages, special ringtones can be set.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Alerts”.4. Select “Message Alert”.5. Select from “Multimedia”, “Text” or “WAP”.6. Select “Volume” and select the desired volume.7. Select “Sound” and select “Preset Sounds” or “My Sounds”.8. Select the desired ringtone.For details on selecting a ringtone, see “Assigning Ringtone” on page 94.9. Select “Vibration” and select from “On”, “Off” or “On & Link to Sound”.For details on selecting a vibration, see “Vibration” on page 94.10. Select “Light” and select from “On”, “Off” or “On & Link to Sound”.For details on selecting “Light”, see “Light” on page 95.11. Select “Duration” and enter the desired time.Low Battery AlertAdjust the volume of the alert when the battery becomes low.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Alerts”.4. Select “Low Battery Alert”.5. Select from “High”, “Low” or “Silent”.Keypad TonesWhen the keypad tone is set on, you will hear a confirmation tone each time you press any keys. “Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Keypad Tones”.4. Select “Switch On/Off”.5. Select “On” or “Off”.6. Select “Volume” and select from “High”, “Middle” or “Low”.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-97.png)
![Settings 977. Select “Tone” and select from “Preset Sounds”, “My Sounds” or “Default Tone”.When selecting “Default Tone”, go to step 9.8. Select the desired tone.For details on selecting the tone, see “Assigning Ringtone” on page 94.9. Select “Duration” and select the desired time.Multimedia VolumeYou can adjust volume for Video Camera, Voice Recorder, Melody Editor, My Items, browser and multimedia messages.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Multimedia Volume”.The current volume level is displayed.4. Press a (or d) to increase the volume or press b (or c) to decrease the volume and then press .To select “Silent”, press b (or c) at level 1.Power On Sound/Power Off SoundThe phone can be set to emit a sound when it is switched on or off. You can define the volume, duration and the melody to be used for this task.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Power On Sound” or “Power Off Sound”.4. Select “Switch On/Off”.5. Select “On” or “Off”.6. Select “Volume” and select the desired volume.7. Select “Sound” and select “Preset Sounds” or “My Sounds”.8. Select the desired sound.For details on selecting a sound, see “Assigning Ringtone” on page 94.9. Select “Duration” and enter the desired time.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-98.png)
![98 SettingsEcho ReductionThis function is for reducing irritating echoes, especially when using the handsfree car kit.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Echo Reduction”.4. Select “On” or “Off”.Any Key AnswerYou can also answer a call by pressing any key except F or [Busy]. For details, see page 21.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Any Key Answer”.4. Select “On” or “Off”.Auto Answer (for handsfree car kit only)Auto Answer function allows you to answer calls automatically by connecting the handsfree car kit for Bluetooth to your phone via Bluetooth wireless technology. You can select the desired time until your phone answers.“Settings” → “Profiles”1. Highlight “Car”.2. Press [Options] and select “Personalise”.3. Select “Auto Answer”.4. Select the desired time.Select “Off” to disable it.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-99.png)
![Settings 1033. Enter a phone number to which you wish to divert calls or search for it in the Contacts List. (p. 34)To use a phone number in the Contacts List, press [Contacts].4. Press .If you select “No Answer” in step 1:5. Select the period of time from 6 levels (05 to 30 seconds).Note• When a divert is set to “All Calls”, “ ” is displayed on the standby screen.Tip• If you select “By Service” in step 2, you can select further divert options.To Check the Divert Status“Settings” → “Call Settings” → “Diverts”1. Select the divert option you wish to check.2. Select “Status”.You can check the status of the selected divert option.Call WaitingIf you wish to be able to receive another incoming call whilst you have a call in progress, you must activate the Call Waiting service.“Settings” → “Call Settings” → “Call Waiting”1. Select “On” or “Off”.Note• The Call Waiting service may not be available on all mobile phone networks. Contact your network operator for more information.Showing Your Phone NumberThis lets you control whether to show your phone number when calling another party or not.“Settings” → “Call Settings” → “Show Your Number”1. Select “On” or “Off”.Note• Some networks do not support this service. Please check with your service provider for availability. (M 9-5-2) (M 9-5-3)](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-104.png)
![Settings 105Fixed Dialling No.When the Fixed Dialling No. is enabled, you can only call predefined numbers.To Enable Fixed Dialling No.“Settings” → “Call Settings” → “Restrict Calls” → “Fixed Dialling No.”1. Enter your PIN2 code.2. Select “Switch On/Off”.3. Select “On” or “Off”.To Add a New Name“Settings” → “Call Settings” → “Restrict Calls” → “Fixed Dialling No.”1. Enter your PIN2 code.2. Select “Edit Dial List”.3. Press [Options] and select “Add New Contact”.4. Add a name and a phone number.For details on adding a name and a phone number, see “Add New Contact” on page 33.5. Press [Save].Changing the Network Password“Settings” → “Call Settings” → “Restrict Calls” → “Change Password”1. Enter the old network password.2. Enter a new network password.3. Enter a new network password again.If you enter the incorrect password, you are asked to enter the password again.4. Press .Auto Redial (M 9-5-5)See “Automatic Redialling” on page 21.Minute Minder (M 9-5-6)Minute Minder function informs you of your talk time by sounding a tone after every minute.“Settings” → “Call Settings” → “Minute Minder”1. Select “On” or “Off”.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-106.png)
![110 Settings“Connection Type”:Bearer connection type (“GPRS Then CSD”, “GPRS” or “CSD”)“GPRS Settings”:“APN”: Access point name“Username”: User name“Password”: Password“Linger Time”: Linger time (0-99999 sec.)“CSD Settings”:“Phone No.”: Telephone Number“Line Type”: Line type (“ISDN” or “Analogue”)“Username”: User name“Password”: Password“Linger Time”: Linger time (0-99999 sec.)To Activate the WAP/MMS/E-mail Profile“Settings” → “Network”1. Select from “WAP Settings”, “MMS Settings” or “E-mail Settings”.2. Select the desired profile.To Edit the WAP/MMS/E-mail Profile“Settings” → “Network”1. Select from “WAP Settings”, “MMS Settings” or “E-mail Settings”.2. Highlight the desired profile.3. Press [Options] and select “Edit”.4. Edit the desired item.To Copy the WAP/MMS/E-mail Profile“Settings” → “Network”1. Select from “WAP Settings”, “MMS Settings” or “E-mail Settings”.2. Highlight the desired profile.3. Press [Options] and select “Copy”.4. Edit the new profile name.To Delete the WAP/MMS/E-mail Profile“Settings” → “Network”1. Select from “WAP Settings”, “MMS Settings” or “E-mail Settings”.2. Highlight the desired profile.3. Press [Options] and select “Delete”.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-111.png)
![114 Connecting GX25 to Your PCNote• Modem communication is not possible whilst communicating with the Handset Manager via Bluetooth wireless technology, infrared or USB interface.Handset ManagerYou can transmit the following items between your phone and your PC, and can use Contacts List entries on your PC.• My Items files (pictures/sounds/video clips)• Contacts List entries• Short messages• Schedule entries(You can send Microsoft Outlook schedule entries to your phone.)To use the Handset Manager function, see “PC Software” on page 92 and set your phone to Data Transfer mode.For details on software support, refer to the following site:http://www.sharp-mobile.comSoftware Installation1. Insert the supplied CD-ROM into your CD-ROM drive.The GX25 CD-ROM screen is displayed.If the GX25 CD-ROM screen is not displayed, double-click [Launcher.exe] in your CD-ROM.2. Press the desired button.The installation starts.3. Follow the on-screen instructions to complete installation.Note• The phone may not recognize the USB data cable if it is connected whilst an application (Camera, My Items, etc.) is running. Connect the USB data cable during standby.](https://usermanual.wiki/Sharp/HRO00036/User-Guide-468788-Page-115.png)
