Sharp HRO00046 PCS Cellular Phone W/ Bluetooth User Manual e gx29
Sharp Corporation PCS Cellular Phone W/ Bluetooth e gx29
UserManual.wiki
>
Sharp
>
HRO00046 User Manual
Users Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![Getting Started 15To Copy Contacts List from the SIM CardWhen you insert the SIM card into your phone for the first time and start the Contacts List application, you are asked whether you wish to copy Contacts List entries on the SIM card. Follow the on-screen instructions, or you can do it later using the Contacts List menu as follows:“Contacts” → “Contacts List” → [Options] → “Advanced” → “Copy All Entries”1. Select “From SIM to Handset”.Display Indicators (Main Display)Status indicatorsRight soft keyLeft soft keyCentre key](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-16.png)
![16 Getting StartedStatus Indicators1. / : Strength of received signal/Service out of range//:GPRS within range and enabled/Roaming outside network/GPRS within range, enabled and roaming2. : Call incoming3. : Call in progress4. / : CSD/GPRS in progress5. : Fax communication in progress6. : “Diverts” (p. 102) set to “All Calls”7. / : Secure WAP page displayed8. / : Text message alerts [unread/mailbox full]9. / : Multimedia message alerts [unread/mailbox full]10. / : Email alerts [unread/mailbox full]11. : USB Data Cable connected12. / : Bluetooth wireless setting [enabled/communicating]13. / : Java™ application [executed (colour)/suspended (grey)]14. (No display)/////:Current profile [Normal/Meeting/Activity/Car/Headset/Silent]15. : T9 text input method enabled16. / / / :Current text input method [First letter upper case/Upper case/Lower case/Numeric]17. / / : “Ringer Volume” (p. 94) set to “Silent”/Vibration enabled (p. 95)/Vibration enabled and sound deactivated](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-17.png)
![Getting Started 1718. : Battery level19. : Daily alarm enabled20. / : Schedule entry enabled [with/without a reminder alarm]21. : Outbox contains unsent multimedia messages22. : WAP alert23. : Voicemail message alertDisplay Indicators (External Display)Status Indicators1. : Strength of received signal2. : Battery level3. : USB Data Cable connected4. / :Bluetooth wireless connection [enabled/communicating]](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-18.png)
![18 Navigating FunctionsNavigating FunctionsAll applications are accessed from the Main menu. To open the Main menu, press the centre key (e) during standby.To launch applications, you will need to highlight menu items, and make selections. To select a menu item (indicated in quotation marks), move the cursor using a, b, c and d, and press e to commit your selection.In certain procedures, you will need to press one of the soft keys (indicated in square brackets), which are displayed at the bottom left and right of the screen. Press the corresponding soft key (A or C).To return to the previous screen, press the right soft key if it displays “Back”. To close the Main menu, press the right soft key if it displays “Exit”.Each section in this User Guide starts with a list of items you will need to select in order (indicated in italics) before performing the procedures shown. Select each item to reveal the next set of items that you have to select. Open subsection items after opening those listed in the main section.Example:“Contacts” → “Contacts List” → [Options] → “Advanced”](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-19.png)
![Call Functions 19Call FunctionsMaking a Call1. Enter the area code and the phone number you wish to dial and press D to dial.If you enter the wrong number, press [Clear] to delete the number to the left of the cursor.Emergency Calls1. Enter 112 (international emergency number) using the keypad and press D to dial.Note• Emergency calls may not be available on all mobile phone networks when certain network services and/or phone features are in use. Contact your network operator for more information.• This Emergency number can normally be used to make an emergency call in any country, with or without a SIM card inserted, if a GSM network is within range.International Calls1. Press and hold Q until a “+” (international dialling prefix) sign is displayed.2. Enter the country code, followed by the area code (without the leading zero) and the phone number, and press D to dial.Speed DiallingUp to 8 phone numbers from the Contacts List memory (Handset and SIM) can be assigned to speed dials. You can call the numbers using the digit keys (H to O).For details on setting the Speed Dial List, see “Speed Dial List” on page 36.1. To dial a number using the speed dial, press and hold any of the digit keys (H to O).The phone number stored in the Speed Dial List is dialled.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-20.png)
![20 Call FunctionsRediallingYou can redial numbers in the call log. Select from specific categories or “All Calls”. Specific category contains up to 10 numbers and the “All Calls” list contains up to 30.1. Press D during standby.2. Press c or d to switch logs between “All Calls”, “Dialled Numbers”, “Missed Calls” and “Received Calls”.3. Highlight the phone number you wish to call.4. Press D to redial the call.Automatic RediallingThis setting allows you to automatically redial the number if the first attempt was unsuccessful because the called party was busy.If you wish to stop redialling, press F or [End].To Set the Auto Redial Function“Settings” → “Call Settings” → “Auto Redial”1. Select “On” or “Off”.Note• When you receive an incoming call, the Auto Redial function is interrupted.• Automatic redialling is not available for fax and data calls.Answering a CallWhen an incoming call is detected, the phone rings.1. Press D, e or [Answer] to answer the call.Or press any key except F and [Busy] when the “Any Key Answer” function is enabled. Set the Any Key Answer function in the profile of each mode. (p. 98)Tip• When the Personal Hands-free Kit (option) is connected to the phone, you can answer calls by pressing the Answer button.• If you have subscribed to the Calling Line Identification (CLI) service and the caller’s network sends the number, the caller’s number is displayed on the screen. If the caller’s name and number are stored in the Contacts List, the caller’s name and phone number are displayed on the screen.• If the number is a restricted number, the display shows “Withheld”.• When receiving a call from the person whose picture is registered in the Contacts List, receiving display and the picture are displayed alternately.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-21.png)
![Call Functions 21Rejecting an Incoming Call1. Press F or press and hold the side-up or side-down key whilst the phone is ringing to reject a call you do not wish to answer.Letting the Caller Know You are Unavailable1. Press [Busy] whilst the phone is ringing to send a busy tone to the caller of an incoming call letting them know that you cannot answer the call.Incall MenuYour phone has additional functions available whilst a call is in progress.Adjusting the Earpiece VolumeDuring a call, you can adjust the earpiece volume (and handsfree volume, if connected).1. During a call, press the side-up or side-down key to display the Earpiece Volume screen.2. Press the side-up key (or a/d) to increase the volume of the call or press the side-down key (or b/c) to decrease the volume.Five levels (level 1 to 5) are selectable.3. Press e when the volume is set to the desired level.The phone returns to the incall screen automatically if left unused.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-22.png)
![22 Call FunctionsPutting a Call on HoldThis function allows you to manage two calls at the same time. If you wish to make another call whilst you are talking to someone, you can put the current call on hold to call someone else.To Make Another Call during a Call1. During a call, press [Options].2. Select “Hold”.The current call is put on hold.To retrieve a call, press [Options] and select “Retrieve”.3. Enter the phone number you wish to make another call to, then press D.Tip• You can also make another call by entering the phone number during a call instead of steps 1 and 2. The current call is automatically put on hold.Call WaitingThis service notifies you of another incoming call whilst you have a call in progress.1. During a call, press [Options] and select “Hold & Answer” to answer the second call.The first call is put on hold and you can now talk to the second caller.2. Press [Options] and select “Swap Calls” to switch between the two calls.3. Press [Options] and select “Release Call” to end the current call and return to the held call.Note• You need to set “Call Waiting” to “On” if you use the Call Waiting service (p. 103).• Call Waiting service may not be available on all networks. Contact your network operator for more information.• If you do not wish to answer the second call, press [Busy], or press [Options] and select “Busy” or “Reject”, in step 1. If “Reject” is selected, the call log of the second call is saved as a missed call.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-23.png)
![Call Functions 23Accessing SMS Menu During a Call1. During a call, press [Options] and select “Text”.The following options are available: “Create Message” to create an SMS, or “Inbox”, “Sent” or “Drafts” to access these folders. For details on SMS, see “Text (SMS)” on page 53.Conference CallConference call is a call with more than 2 participants. You may include up to 5 participants in a conference call.To Make a Conference CallTo make a conference call, you must have one active call and one held call.1. During a call, press [Options] and select “Multiparty” to answer the second call.2. Select “Conference All” to join the conference call.3. Press F to end the conference call.Note• Conference call service may not be available on all networks. Contact your network operator for more information.• You have more options for the Conference call in step 2:• To put all participants on hold, select “Conference Hold All”.• To put all participants except the current call on hold, select “Private”.• To end the call with all participants, select “Release All”.• To disconnect from the conference call but still allow the other participants to continue talking together, select “Transfer”.• To put the current call on hold and continue to have a conference call with the remaining participants, select “Exclude”.• To reject adding more participants to the current party, select “Reject”, or you can send the busy tone by selecting “Busy”.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-24.png)
![24 Call FunctionsTo Add New Participants to the Conference Call1. Press [Options] and select “Dial”.2. Enter the number you wish to include in the conference call and press D to dial.3. Press [Options] and select “Multiparty”.4. Select “Conference All” to join the conference call.If you wish to add other participants, repeat steps 1 to 4.To End the Call with a Conference Call Participant1. During a conference call, highlight the person that you wish to disconnect from the conference call.2. Press [Options] and select “Release Call”.To Have a Private Conversation with One of the ParticipantsIf you wish to have a private conversation with one of the participants, you may select the participant from the conference list and put the other participants on hold.1. During a conference call, select the person that you wish to talk to.2. Press [Options] and select “Multiparty”.3. Select “Private”.4. Once you have finished the private conversation, press [Options] and select “Multiparty”.5. Select “Conference All” to return to the conference call.Muting the Microphone1. During a call, press [Mute] to mute the microphone.To unmute the microphone, press [Unmute].](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-25.png)
![Entering Characters 25Entering CharactersWhen entering characters to create Contacts List entries, text messages or multimedia messages, etc., press the corresponding keys.In multi-tap input method, press each key until the desired character is displayed. For example, press H once for the letter “A” or twice for the letter “B”.Table of CharactersPressing each key scrolls characters in the following order. The order varies depending on the language selected.English ModeKey Upper Case CharactersLower Case Characters NumericG. (full-stop) , (comma) - (hyphen) ? ! ’ (apostrophe) @ :1 1HABC2 abc2 2IDEF3 def3 3JGHI4 ghi4 4KJKL5 jkl5 5LMNO6 mno6 6MPQRS7 pqrs7 7NTUV8 tuv8 8OWXYZ9 wxyz9 9Q(space)+ = < > € £ $ ¥ % &0 0PSwitches character case among four modes: Abc, ABC, 123 and abc.R.,?!:;-+#*@' '' ( )_&€£$%/ ˜<>§= \ | ¥¿¡^[ ]{ }¤ÅÄÆåäæàÇÉèé ìÑñÖØöøòßÜüù∆ΦΓΛΩΠΨΣΘΞ (space) ↵G-O:QPress and hold to enter 0 - 9 numbers.P: Press and hold to shift between multi-tap and T9 mode.R: Press and hold to display the language options screen.Key Upper Case CharactersLower Case Characters Numeric](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-26.png)
![26 Entering CharactersChanging the Input LanguagesYou can change the input language on the text entry screen.1. On the text entry screen, press [Options].2. Select “Input Language”.If “Input Language” is not displayed, select “Text Options” and then select “Input Language”.3. Select the desired language.Tip• You can press and hold R instead of steps 1 and 2 to display the language options screen.Changing the Input MethodT9 Text InputT9 text input method is a shortcut to enter text easily and quickly.1. On the text entry screen, press and hold P to enter T9 mode.2. Press [Options].3. Select “Input Method”.If “Input Method” is not displayed, select “Text Options” and then select “Input Method”.4. Select the input mode (Abc, ABC, abc, 123).5. Press each key once for any letter you require on that key.To enter the word “How”, press J L O.6. If the word shown isn’t the one you want, press a or b until you highlight the correct one.7. Press e to select the word.Note• If the correct word is not shown in step 6, enter the correct word again after switching to the multi-tap input method.Tip• If you press Q instead of step 7, a space is inserted next to the selected word.Symbols and Punctuations1. On the text entry screen, press [Options].2. Select “Add Symbol”.If “Add Symbol” is not displayed, select “Text Options” and then select “Add Symbol”.3. Select the desired symbol.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-27.png)
![Entering Characters 27My DictionaryYou can create your own word list for T9 text input.1. On the text entry screen in T9 mode, press [Options].2. Select “My Dictionary”.If “My Dictionary” is not displayed, select “Text Options” and then select “My Dictionary”.3. Select “Add New Word” and enter a new word.To edit a word in the list1. On the text entry screen in T9 mode, press [Options].2. Select “My Dictionary”.If “My Dictionary” is not displayed, select “Text Options” and then select “My Dictionary”.3. Highlight the desired word.4. Press [Options] and select “Edit”.5. Modify the word.Tip• You can also carry out the following steps to register a new word in the list for T9 text input.1. Enter a (part of) word in T9 mode you wish to register.2. Press [Options].3. Select “My Dictionary”.If “My Dictionary” is not displayed, select “Text Options” and then select “My Dictionary”.4. Modify the word.Using Text TemplatesYou can use the sentences registered in Text Templates when entering characters.For details on creating the text template, see “Adding Phrases to Text Templates” on page 71.1. On the text entry screen, move the cursor to the point you wish to insert the template.2. Press [Options].3. Select “Add Text Template”.If “Add Text Template” is not displayed, select “Text Options” and then select “Add Text Template”.4. Select the desired text template.The selected text template is inserted.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-28.png)
![Contacts List 31Contacts ListYou can store the phone numbers and Email addresses of your friends, family and colleagues in the Contacts List.Depending on the size of the entry, your phone can store up to 640 entries. In a Contacts List, you can store the following items.Items stored in the handset memoryFirst NameLast NameTel MobileTel PrivateTel OfficeEmail PrivateEmail BusinessGroupAddress (Street & Number, Postal Code, City, State/Province, Country)NoteItems stored in the SIM memoryName: The number of characters that can be stored differs depending on the SIM card you use.Phone: Up to 40 digitsUsing the Bluetooth wireless function, you can send the Contacts List entry to a PC to share the same entries.Selecting the Storage Memory“Contacts” → “Contacts List” → [Options] → “Advanced” → “Save New Contacts”1. Select Contacts location from “To Handset”, “To SIM” or “Choose before Saving”.Tip• “Choose before Saving” prompts you to choose the memory every time you save a new entry.Changing the List Displayed“Contacts” → “Contacts List” → [Options] → “Advanced” → “Contacts Location”1. Select from “Handset Memory”, “SIM Memory” or “Both”. (M 8-1)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-32.png)
![32 Contacts ListChanging the Name Order“Contacts” → “Contacts List” → [Options] → “Advanced” → “Name Order”1. Select from “First - Last name” or “Last - First name”.Add New ContactYou can choose either the phone or SIM card memory locations to store the new entry. For switching locations, see “Selecting the Storage Memory” on page 31.The amount of phone numbers that you can store to the SIM card is dependent on its capacity. Contact your network operator for details.“Contacts” → “Contacts List” → “Add New Contact”If you select the “Choose before Saving” option for the memory to be used, the selection is between “To Handset” and “To SIM”.1. Select the field you wish to fill in, and enter the relevant information.2. Press [Save] when finished.Tip• To create an entry, at least one field must be filled. If you create a new entry on the SIM card, you need to enter a phone number.Adding a Thumbnail to Entries“Contacts” → “Contacts List”1. Highlight the desired handset entry.2. Press [Options] and select “Edit/Add Details”.3. Press [Options] and select “Picture”.4. Select the desired picture.5. Press [Save] when finished.Note• Thumbnails can be added only to the entries stored in the handset memory.• From the Contacts List entry that has a thumbnail added, you can change or delete it by selecting “Change” or “Remove” after step 3.• If you delete a picture in Saved Pictures, the corresponding thumbnail is also deleted.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-33.png)
![Contacts List 33Copying Contacts List Entries between SIM Card and Handset“Contacts” → “Contacts List” → [Options] → “Advanced” → “Copy All Entries”1. Select “From SIM to Handset” or “From Handset to SIM”.Note• When you insert the SIM card into your phone for the first time and start the Contacts List application, the confirmation screen appears automatically, asking you if you wish to copy or not. The number of Contacts List entries to be copied varies depending on the SIM capacity.Copying a Single Entry from Handset to SIM Card“Contacts” → “Contacts List”1. Select the desired entry.2. Highlight the desired phone number.3. Press [Options] and select “Copy to SIM”.Finding a Name and Number“Contacts” → “Contacts List”1. Enter the first few letters of the name.Search results are displayed in alphabetical order.Tip• You can select the Contacts location from “Handset Memory”, “SIM Memory” or “Both” before searching.• To view the details of the item such as address, highlight the desired item, press [Options]and select “View”.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-34.png)
![34 Contacts ListDialling from the Contacts List“Contacts” → “Contacts List”1. Highlight the desired entry and press D.Tip• If more than one phone number is registered for the entry, select the desired phone number after step 1 and press D. You can also dial the desired phone number by pressing the digit key corresponding to the position the entry is on the list.• You can also dial from the details screen of the Contacts List. On the details screen, select the desired phone number and press D.Editing Contacts List Entries“Contacts” → “Contacts List” → [Options] → “Edit/Add Details”1. Select the field you wish to edit, and modify the information.2. Press [Save] when finished.Deleting Contacts List EntriesDeleting All Contact Entries“Contacts” → “Contacts List” → [Options] → “Advanced” → “Delete All Entries”1. Enter your handset code.2. Select “Handset Entries” or “SIM Entries”.The default handset code is “0000”. For details on changing the handset code, see “To Change Handset Code” on page 112.Deleting a Contact Entry“Contacts” → “Contacts List”1. Highlight the desired entry.2. Press [Options] and select “Delete”.Viewing GroupsYou can set group icons when storing Contacts entries so that you can easily find and edit them.“Contacts” → “Contacts List” → [Options] → “Advanced” → “Group” → “View Groups”1. Select the desired group.“ ” appears next to the selected group. Select the group again to cancel, and the checkbox becomes unchecked.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-35.png)
![Contacts List 35Note• This menu is available when the Contacts location is set to “Handset Memory”.Tip• Press [Options] and select “Current Only” to view only the selected group or “Select All” to view all groups.Group CallDifferent ringtones can be set for each group. When you purchase this phone, groups are set to off. If you do not set a group ringtone, the ringtone assigned in the Settings menu is used.“Contacts” → “Contacts List” → [Options] → “Advanced” → “Group” → “Group Call”1. Select the desired group.2. Select “Switch On/Off”.3. Select “On” or “Off”.4. Select “Assign Ringtone”.5. Select “Preset Sounds” or “My Sounds”.6. Select the desired ringtone.For details on selecting a ringtone, see “Assigning Ringtone” on page 94.7. Select “Vibration” and select from “On”, “Off” or “On & Link to Sound”.For details on selecting a vibration, see “Vibration” on page 95.8. Press [OK].Note• This menu is available when the Contacts location is set to “Handset Memory”.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-36.png)
![36 Contacts ListAssigning a Ringtone to Each Contacts List EntryA specified ringtone or vibration setting can be associated to a pre-registered entry.“Contacts” → “Contacts List”1. Select the desired entry.2. Press [Options] and select “Edit/Add Details”.3. Press [Options] and select “Ringtone”.4. Select “Switch On/Off”.5. Select “On” or “Off”.6. Select “Assign Ringtone”.7. Select “Preset Sounds” or “My Sounds”.8. Select the desired ringtone.For details on selecting a ringtone, see “Assigning Ringtone” on page 94.9. Select “Vibration” and select from “On”, “Off” or “On & Link to Sound”.For details on selecting a vibration, see “Vibration” on page 95.10.Press [OK].11.Press [Save].Memory StatusThis function helps you to check the memory used in the Contacts List.“Contacts” → “Contacts List” → [Options] → “Advanced” → “Memory Status”Speed Dial ListYou can set a maximum of 8 phone numbers in the Speed Dial List (p. 88).Setting Contacts List Entries in the Speed Dial List“Contacts” → “Contacts List”1. Select the desired entry.2. Highlight the desired phone number.3. Press [Options] and select “Add to Speed Dial”.4. Select the desired list number.Tip• The nine digit keys correspond to list numbers.• To view the speed dial list, see page 88.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-37.png)
![Contacts List 37Sending a Contacts List Entry“Contacts” → “Contacts List”1. Highlight the desired entry.2. Press [Options] and select “Send Contact”.3. Select “Via Bluetooth”.For “Via Bluetooth”The phone starts searching for Bluetooth wireless technology enabled devices within 10 metres.When detected, a list of enabled devices is displayed allowing you to select the desired device. The connection can be established and the entry is sent.Note• When pairing, you need to enter your passcode when establishing contact with a Bluetooth wireless technology enabled device for the first time except when “Authentication” (p. 92) is set to “Off”.Tip• You can send your own Contacts List entry. Highlight “My Card” in step 1. For details on storing your information in My Card, see “Registering Your Information as a Contacts List Entry” on page 38.Receiving a Contacts List EntryWhen the phone receives a Contacts List entry, a confirmation message appears.1. Press [Yes].The received entry is registered in the Contacts List. Press [No] to reject.Tip• For details on making Bluetooth wireless settings, see “Connectivity” on page 90.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-38.png)
![38 Contacts ListRegistering Your Information as a Contacts List EntryYou can store your information in the Contacts List.“Contacts” → “Contacts List” → “My Card”1. Press [Options] and select “Edit/Add Details”.2. Select the field you wish to fill in, and enter the relevant information.3. Press [Save] when finished.Dialling a Service Phone NumberCertain SIM cards contain service phone numbers that can be dialled. Contact your SIM card vendor for more information. On the Contacts screen, “Service Dialling No.” is displayed at the bottom of the list.“Contacts”1. Select “Service Dialling No.”.2. Select the desired service phone number.Tip• If the SIM card contains only one service phone number, you can dial it in step 1 by pressing e.• If no service phone number is stored in the SIM card, this menu is not displayed.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-39.png)
![Camera 39CameraYour phone has an integrated digital camera.This allows you to take and send pictures or video clips wherever you are.Take PicturePut the phone into the digital camera mode to take a picture. Pictures are saved in Saved Pictures in JPEG format in the following three picture sizes.L: 480 × 640 dotsM: 240 × 320 dotsS: 120 × 160 dotsTaking Pictures“Camera” → “Take Picture”The preview is displayed through the screen.1. Press e or the side-down key to take the picture.The shutter sounds and the still image of the taken picture is displayed. Press [Cancel] to retake a picture.2. Press [Save].“Saving (file name) to My Items…” is displayed, then the picture is registered.3. Press F to return to standby.Remaining shots indicator123: Indicates the remaining number of pictures that can be taken.Tip• If you wish to send a picture by multimedia message after taking the picture, press e before step 2. Then select “Multimedia” or “Postcard”. (The Postcard service is not available with some service providers. Please contact your service provider for more information.) Large MMS messages may cause the size of attached pictures to be reduced.Using the Full ScreenThe preview can be displayed on the full screen without the soft key area and indicators.“Camera” → “Take Picture” → [Options] → “Full Viewfinder”1. Select “On” or “Off”.[Options] is not displayed if “On” is selected. Press A when you need the option menu.Note• When “Picture Size” is set to “S”, you cannot use the full screen.Tip• You can also turn on or off the full screen mode by pressing Q. (M 5) (M 5-1)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-40.png)
![40 CameraUsing the Zoom FunctionPress c or d to change the zooming ratio.Zooming ratio indicators : Magnification.Note• When “Picture Size” is set to “S”, the zoom function has 3 magnifications (×1, ×2, ×4).• When “Picture Size” is set to “M”, the zoom function has 2 magnifications (×1, ×2).Selecting the Picture Size“Camera” → “Take Picture” → [Options] → “Picture Size”1. Select the desired picture size.Selecting the Picture Quality“Camera” → “Take Picture” → [Options] → “Picture Quality”1. Select “Normal” or “Fine”.Picture quality indicators:Fine: NormalSelecting the Anti-flicker Mode“Camera” → “Take Picture” → [Options] → “Anti-flicker”1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”.Note• Vertical stripes may occur on the picture due to the light source. Change the anti-flicker mode to rectify.• The digital camera uses a C-MOS sensor. Although this camera has been manufactured to the highest specifications, some pictures may still appear too bright or too dark.• If the phone has been left in a hot place for a long time before taking or registering a picture, the picture quality may be poor.In the Case of No Available MemoryWhen the number of pictures that can be taken becomes 3 or less, the remaining shots indicator in the upper left of the screen turns red. (The number of pictures that can be taken is approximate.)When the number of pictures that can be taken becomes 0, and when you try to take a picture again, “Memory full. Please delete some data!” is displayed.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-41.png)
![Camera 41Adjusting the Brightness of the Picture According to Lighting ConditionsPress a or b to adjust the brightness of the picture.Picture brightness (exposure level) indicators : (Bright → Normal → Dark)Once the phone has returned to the standby screen, the brightness settings return to default.Viewing the Taken Pictures“Camera” → “Take Picture” → [Options] → “My Pictures”The list of pictures is displayed.1. Select the file you wish to view.The selected picture is displayed.Tip• Your pictures are given file names which are “pictureNNN.jpg” (NNN is a consecutive number).The file name (without an extension), date and size of your pictures are displayed in the list.Using the Timer (Delay Timer)“Camera” → “Take Picture” → [Options] → “Delay Timer”1. Select “On” or “Off”.When you select “On”, “ ” is displayed on the screen and the phone returns to digital camera mode. Note, however, that if “Continuous Shoot” on page 42 is activated, “ ” is displayed instead of “”.2.Press e or the side-down key to start the delay timer.10 seconds after the timer sounds, the shutter sounds, and the camera takes a picture.Note• The countdown sounds whilst the delay timer is operating.•If e or the side-down key is pressed whilst the delay timer is operating, the picture is taken instantly.• The zoom function with c or d, or brightness adjustment of the picture with a or b, is unavailable whilst the delay timer is operating.• If you wish to stop taking pictures with the timer, press [Cancel] whilst the delay timer is operating.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-42.png)
![42 CameraContinuous ShootFour pictures are taken in succession. Auto Shoot and Manual Shoot are available.Continuous Shoot indicators“Camera” → “Take Picture” → [Options]→ “Continuous Shoot”1. Select “Auto Shoot” or “Manual Shoot”.Select “Off” to cancel.2. Press e or the side-down key to start Continuous Shoot.Auto Shoot: Four pictures are taken in a row.Manual Shoot: Pictures are taken one by one by pressing e or the side-down key.The taken pictures are saved automatically.To stop Continuous Shoot, press [Cancel].Note• When “Picture Size” is set to “L”, you cannot use the Continuous Shoot function.• When you select a frame for taking pictures, you cannot use the Continuous Shoot function.• Delay timer cannot be used with the Manual Shoot function.Selecting a FrameYou can select the frame from preset patterns. You can also select a frame in Saved Pictures.“Camera” → “Take Picture” → [Options] → “Add Frame”1. Select “Preset Frames” or “My Pictures”.2. Select the desired frame.The selected frame is confirmed on the display.3. Press e.Note• When “Picture Size” is set to “L”, you cannot use the Frame function.• When you activate the Continuous Shoot, you cannot use the Frame function.•Only images in PNG format can be selected as the frame if you select “My Pictures” in step 1. However, images larger than the picture size which you select cannot be used.:When pictures are taken in Continuous Shoot mode, these indicators appear on the screen.* When delay timer and Continuous Shoot functions are simultaneously set, “ ” is displayed instead.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-43.png)
![Camera 43Selecting the Shutter SoundYou can select the shutter sound from 3 preset patterns.“Camera” → “Take Picture” → [Options] → “Shutter Sound”1. Select the desired shutter sound.To play back the shutter sound, press [Play].Note• Continuous Shoot uses the specialised shutter sound that cannot be changed for the above settings.Record VideoPut the phone into the video camera mode to record a video.Video clips are saved in “.3gp” format in the following two modes:Record size indicators: Message sending mode enabled: Extended video mode enabledRecording Video ClipsSound can be recorded with the video clip.“Camera” → “Record Video”The preview is displayed through the screen.1. Press e or the side-down key to start recording the video clip.The sound for recording the video clip occurs.If you press e or the side-down key again, or when the recording is completed, the sound for ending the video clip recording occurs and the display transits to step 2.2. Select “Save”.“Saving (file name) to My Items…” is displayed, then the video clip is registered.To preview a video clip before saving, select “Preview”.To send a video clip by multimedia message after recording the video clip, select “Save and Send”.To record a video clip again, press [Cancel].Remaining sets indicator123 : Indicates the remaining sets of video clips that can be recorded. (M 5-2)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-44.png)
![44 CameraUsing the Zoom FunctionPress c or d to change the zooming ratio.Zooming ratio indicators : Magnification.Selecting the Recording Size ModeYou can select the recording size mode.“Camera” → “Record Video” → [Options] → “Record Size”1. Select “Extended Video” or “For Message”.Note• If “For Message” is selected, the size of the video clip that can be recorded depends on the message size set in MMS settings (p. 51).• When the Message Size described on page 51 is set to “100 KB”, “Record Size” is not displayed.• “Save and Send” is not displayed after recording in extended video mode.Selecting Video Quality“Camera” → “Record Video” → [Options] → “Video Quality”1. Select “Normal” or “Fine”.Video quality indicators:Fine: NormalSelecting the Anti-flicker Mode“Camera” → “Record Video” → [Options] → “Anti-flicker”1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”.Note• Vertical stripes may occur on the preview screen due to the light source. Change the anti-flicker mode to rectify.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-45.png)
![Camera 45In the Case of No Available MemoryWhen the number of video clips that can be recorded becomes 3 or less, the remaining sets indicator in the upper left of the screen turns red. (The number of sets that can be recorded is approximate.)When the number of video clips that can be recorded becomes 0, and when you try to record a video clip again, “Memory full. Please delete some data!” is displayed.Adjusting the Brightness of the Video Clips According to Light ConditionsPress a or b to adjust the brightness of the video clip.Picture brightness (exposure level) indicators : (Bright → Normal → Dark)Once the phone has returned to the standby screen, the brightness settings return to default.Viewing Recorded Video Clips“Camera” → “Record Video” → [Options] → “My Videos”The list of video clips is displayed.1. Select the file you wish to view.2. Press e.The selected video clip is played back.To pause playback, press e.To resume playback, press e again.To stop playback, press [Back].To display the video clip in its original size, press [×1].Tip• Your video clips are given file names such as “videoNNN.3gp” (NNN is a consecutive number). The file name (without an extension), date and size of your video clips are displayed in the list.• If the video clip has been recorded with sound, the volume can be adjusted by pressing a (or d/the side-up key) or b (or c/the side-down key).• The volume varies depending on the Multimedia Volume settings (p. 97). The sound is deactivated when “Multimedia Volume” is set to “Silent”.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-46.png)
![46 CameraUsing the Timer (Delay Timer)To Record a Video Clip with the Timer“Camera” → “Record Video” → [Options] → “Delay Timer”1. Select “On” or “Off”.When you select “On”, “ ” is displayed on the screen and the phone returns to video camera mode.2. Press e or the side-down key to start the delay timer.10 seconds after the timer sounds, the camera starts recording the video clip.Note• The countdown sounds whilst the delay timer is operating.•If e or the side-down key is pressed whilst the delay timer is operating, the video clip is recorded instantly.• The zoom function with c or d, or brightness adjustment of the video with a or b, is unavailable whilst the delay timer is operating.• If you wish to stop recording video clips with the timer, press [Cancel] whilst the delay timer is operating.Recording Video Clips with Sound“Camera” → “Record Video” → [Options] → “Voice Record”1. Select “On” or “Off”.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-47.png)
![Messages 47MessagesYour phone allows you to send and receive text or multimedia and to receive WAP alerts.Multimedia (MMS)About Multimedia MessagingMultimedia Messaging Service (MMS) allows you to send and receive multimedia messages with graphical images, photographs, sound, animations or video clips attached.Note•Some MMS functions may not always be available depending on your network. Contact your network operator for more information.Creating a New MMSA → “Multimedia” → “Create Message”1. Enter the message.To use the text template, move the cursor to the point you wish to insert the template. Press [Options] and select “Text Options”. Select “Add Text Template” and then select the desired template.2. Select the desired recipient from the Contacts List entries.If the desired entry does not exist, select “Enter Number” or “Enter Email Address” and enter the phone number or Email address.3. Select “Send”.After the message is sent, the message is moved to the Sent box.Note• The current message size displayed whilst you are creating the message is an approximation.• If a message cannot be sent for some reason, the message stays in the Outbox and “ ” is displayed on the standby screen. (M 4) (M 4-2) (M 4-2-1)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-48.png)
![48 MessagesTip• To save the message without sending, select “Save to Drafts” instead in step 3.• To enter the subject, select “Subject” in step 3 and enter it. Up to 40 characters as the subject (and up to 20 recipients (for To and Cc)) can be entered. However, these may be limited depending on your network. In this case, you may not be able to send MMS. Contact your network operator for more information.• To add more recipients, select “Add Contact” in step 3. Select “To” or “Cc” and select the desired number of the recipient. Then enter the phone number or Email address.To Send a Message Template MMSYour phone provides message templates with an image and voice attachment that help you create MMS easily.A → “Multimedia” → “Create Message” → [Options] → “Message Template”A confirmation screen asking whether you wish to discard the current text is displayed.1. Confirm by selecting [Yes] or [No].2. Select the desired template.3. Enter the message.4. Select the desired recipient from the Contacts List entries.If the desired entry does not exist, select “Enter Number” or “Enter Email Address” and enter the phone number or Email address.5. Select “Send”.Note• Selecting “Message Template” deletes messages or images you have entered or attached. To prevent deletion, select “Message Template” first, then enter messages.Turning the Slide Show Setting On or OffA → “Multimedia” → “Settings” → “Slide Show”1. Select “On” or “Off”.If You Select “On”• You can create messages which have up to 10 slides. Each slide can contain one picture, one sound file and up to 1000 characters of text (up to the message total 30 KB or 100 KB limit).](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-49.png)
![Messages 49• If you wish to add a slide to a single slide, press [Options] and select “Add Slide”. If you wish to perform slide operations for multiple slides, press [Options] and select “Slide Control”.The slide control options available are:Add: To add a new slide.Remove: To remove the active slide.Previous: To navigate to the previous slide.Next: To navigate to the next slide.• Video clip data cannot be attached as slide data to the message.If You Select “Off”• You can attach a maximum of 20 pictures, sounds or video clips and up to 2000 characters of text (up to the message total 30 KB or 100 KB limit).Inserting Attached DataYou can send pictures, sounds and video clips saved in the handset memory attached to multimedia messages. When attaching video clips, “Slide Show” must be set to “Off”.A → “Multimedia” → “Create Message” → [Options]1. Select from “Picture”, “Sound” or “Video”.2. Select from “Saved Pictures”, “Saved Sounds” or “Saved Videos”.3. Select the desired file.The selected picture/sound/video clip is attached.When attaching is complete, press [Back] to return to the message creation screen.• To add more files, press [Options] and select from “Add Picture”, “Add Sound” or “Add Video”. Then select from “Saved Pictures”, “Saved Sounds” or “Saved Videos”, and select the desired file.• To remove the attached files, press [Options] and select “Remove”.Note• Pictures/Sounds/Video clips protected with a copyright cannot be sent attached to a message.• Instead of performing step 2, you can send data recorded with “Take Picture”, “Record Voice” or “Record Video” options.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-50.png)
![50 MessagesReading MMSMessages you receive are stored in the Inbox.Incoming MessagesThe MMS indicator ( ) will appear when you are receiving an incoming message.A → “Multimedia” → “Inbox”1. Select the message you wish to view.The message is displayed.2. Scroll the screen to read the message.Tip• The volume varies depending on the Multimedia Volume settings (p. 97). The sound is deactivated when “Multimedia Volume” is set to “Silent”.Storing the Phone Number or Email Address of a Sender in the Contacts ListA → “Multimedia” → “Inbox”1. Highlight the message from which you want to store the phone number or Email address.2. Press [Options] and select “Save Sender”.For details on entering a name, see “Add New Contact” on page 32.Retrieving MMSA → “Multimedia” → “Inbox”When “ ” is in the Inbox, the following can be done.1. Highlight the alert you wish to download.2. Press [Options] and select “Download”.Tip• You can press e instead of step 2 to start downloading.Confirming Arrival of Delivery ReportA → “Multimedia” → “Sent”1. Highlight the message of which you wish to confirm arrival of delivery report.2. Press [Options] and select “Delivery Report”.This menu is available only for sent messages that have the “Delivery Report” set to “On”. For details on selecting “Delivery Report”, see “Setting Up MMS” on page 51.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-51.png)
![52 MessagesSending a Picture File with PostcardYour phone allows you to send multimedia messages to a Vodafone specific Postcard service centre that prints the picture and mail it to the recipient’s home address specified in the MMS message. (Your phone is initially provided with the address of a Vodafone specific Postcard service centre, and its address cannot be changed.)Note• This service is not available with some service providers. Please contact your service provider for more information.To Create a New PostcardSee the note on page 30 for menu indications.A → “Multimedia” → “Postcard”1. Select “Saved Pictures”.2. Select a picture you wish to use for a postcard.3. Enter your message.4. Select the desired recipient from the Contacts List entries and enter the following information.If the desired entry does not exist, select “Enter Address” and enter the following information.See the note below for details.•Name •City• Additional Information• State/Province• Street & Number • Country• Postal Code5. Press [Options] and select “Send”.Note• Instead of performing step 1, you can use data taken with the “Take Picture” option.• The items Name, Street & Number and City are necessary to complete sending Postcards.• Information for a recipientName (mandatory):Name of the recipient for a postcard up to 50 charactersAdditional Information (optional):Additional information of the recipient up to 50 charactersStreet & Number (mandatory):Street and number up to 50 charactersPostal Code (optional):Postal code up to 20 charactersCity (mandatory):City up to 50 characters](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-53.png)
![54 MessagesCreating and Sending a New SMSA → “Text” → “Create Message”1. Enter your message.To use the text template, move the cursor to the point you wish to insert the template. Press [Options] and select “Add Text Template” and then select the desired template.2. Select the desired recipient from the Contacts List entries.If the desired entry does not exist, select “Enter Number” and enter the phone number.3. Select “Send”.The phone begins the sending process and the SMS is sent. After the message has been sent, the message is added to the Sent box.To save the message in the Drafts box without sending it, select “Save to Drafts”.Note• When you send a message of more than 160 characters, the confirmation message is displayed.Tip• To add more recipients, select “Add Contact” in step 3. Select an item number for adding the recipient’s phone number. Then enter the phone number.Reading SMSIncoming MessagesThe SMS indicator ( ) will appear when an incoming message arrives.1. When you receive a SMS, press e during standby.2. Select the message you wish to view.The sender’s phone number and a part of the message are displayed. When the sender’s phone number is stored in the Contacts List, the sender’s name is displayed instead of the phone number.Messages that are marked with “ ” denote unread messages. If the Inbox, Sent box or Drafts box is full, “ ” is displayed. Delete unnecessary messages.3. Scroll the screen to read the message.Extracting Phone Numbers from the Received Messages and Making a CallYou can make a call using the phone number embedded in the received SMS message.A → “Text” → “Inbox”1. Select the message from which you wish to extract phone numbers. (M 4-3-1)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-55.png)
![Messages 552. Press [Options] and select “Extract Numbers”.Telephone numbers embedded in the message are displayed.3. Highlight the phone number.4. Press [Options] and select “Make Call”.To save this phone number in the Contacts List, select “Save Number”.Setting Up SMSTo Set Up the Service Centre AddressA → “Text” → “Settings” → “Message Centre”1. Enter the centre phone number.If you wish to enter a country code for a message to an international number, press and hold Q until a “+” sign is displayed.Message LifetimeThis indicates the number of days and hours for which a message you send may remain undelivered to the message recipient.During this period, the message service centre will continually try to deliver the message to the recipient.A → “Text” → “Settings” → “Message Lifetime”1. Select the validity period.Message FormatA → “Text” → “Settings” → “Message Format”1. Select the message format.Connection TypeA → “Text” → “Settings” → “Connection Type”1. Select the connection type.OptimisationWhen set “On” (default), double-byte characters such as European characters with an accent are converted into single-byte characters and sent.When “Off”, double-byte characters are sent as displayed.Please note that you may be charged double for double-byte characters sent in an SMS when Optimisation is set “Off”.A → “Text” → “Settings” → “Optimisation”1. Select “On” or “Off”. (M 4-3-5)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-56.png)
![56 MessagesEmailAbout Email MessagingThe Email service allows you to send and receive Email messages. Email messages of up to 2000 characters can be sent. The size of the Email messages to be received depends on Email settings.Note• You cannot send Email messages with files attached. If you forward Email messages with files attached, the attached files are deleted.Creating a New Email MessageA → “Email” → “Create Message”1. Enter the message.2. Select the desired recipient from the Contacts List entries.If the desired entry does not exist, select “Enter Email Address” and enter the Email address.3. Select “Send”.After the message is sent, the message is moved to the Sent box.Note• If a message cannot be sent for some reason, the message stays in the Outbox. To re-send the massage, carry out the following:A → “Email” → “Outbox”1. Highlight the desired message.2. Press [Options] and select “Re-send”.Tip• You can use the text template to make it easier to complete the message, and you can add your signature at the end of the message. To use the text template, move the cursor to the point you wish to insert the template. Press [Options] and select “Add Text Template”. Select the desired template. To add the signature, press [Options] and select “Add Signature”. Select the desired signature.• Select “Save to Drafts” instead in step 3 to save the message without sending.• Select “Subject” in step 3 to enter the subject. Up to 40 characters as the subject can be entered.• Select “Add Contact” instead in step 3 to add more recipients (up to 30 recipients (for To, Cc and Bcc)). Select “To”, “Cc” or “Bcc” and select or enter the desired address of the recipients. (M 4-4)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-57.png)
![Messages 57Reading an Email MessageIncoming MessagesThe Email indicator ( ) will appear when there are unread messages.A → “Email” → “Inbox”1. Select the message you wish to view.2. Scroll the screen to read the message.Tip•If you wish to download Email messages, press A during standby and select “Email”. Then select “Check Email”.Storing the Email Address of a Sender in the Contacts ListA → “Email” → “Inbox”1. Highlight the message from which you want to store the Email address.2. Press [Options] and select “Save Sender”.For details on entering a name, see “Add New Contact” on page 32.Setting Up EmailA → “Email” → “Settings”1. Select the item you wish to set up.• Download Size (Whole Message, First 20KB):Controls the download size of the Email. The “Whole Message” option is limited to a maximum of 100 KB.• Edit Signature:Opens the text template screen to edit the signature.• Auto Delete (Off, Inbox, Sent, Both):Deletes the oldest message automatically when the Inbox, Sent or both (Inbox and Sent) is full.• Reply Message (Incl. Original Mail, Excl. Original Mail):Includes or excludes the original message when replying. (M 4-4-7)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-58.png)
![58 MessagesCell BroadcastsYou can receive Cell Broadcast messages or general messages such as weather forecasts and traffic reports. This information is broadcasted to subscribers in certain network areas.This function may not be available on all mobile phone networks. Contact your network operator for more information.Enabling/Disabling Cell BroadcastsA → “Cell Broadcasts” → “Switch On/Off”1. Select “On” or “Off”.Reading Cell Broadcast MessagesA → “Cell Broadcasts” → “Read Messages”1. Select the desired subject.2. Scroll the screen to read the message.3. Press [Back].Setting LanguagesYou can select your preferred language for the cell broadcast message display.A → “Cell Broadcasts” → “Settings” → “Language”The current language is displayed.1. Press e.The language list is displayed.2. Select the desired language.3. Press [Save].Subscribing to Cell BroadcastsSelect the page of the cell broadcast message that you want.A → “Cell Broadcasts” → “Settings” → “Set Info Subjects”1. Select “Add/Remove”.2. Select the desired page.3. Press [Save].Tip• If the desired page is not in the list that appears in step 2, select “Create Subject” in step 1, then enter the subject code to add a page. For details on the subject code, contact your service provider. (M 4-8) (M 4-8-1) (M 4-8-2)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-59.png)
![60 Vodafone live!Navigating a WAP Page•a b c d:Move the highlights around in the screen.•e: Executes the option displayed in the lower centre of the screen.•A: Launches browser option menu.•C: Selects an action displayed in the lower right corner of the screen.Used to access “Vodafone live!” by opening the browser.•Q (press and hold):Starts the “Go to URL”.•G to O (press and hold):Launches the Bookmark (WAP) after assigning “Hotkeys” with the “View bookmarks” option of the browser. For details on setting Hotkeys, see “Setting the Hotkeys to Web Page Bookmarks” on page 62.•F: Exits the browser (short press).Turns off the phone. (press and hold)Browser MenuWhen you are browsing, you can reach browsing options by pressing [Options].•Select:Selects the link you wish to see. (“Select” is displayed only when the link is highlighted.)•Home:Goes to the homepage you set in the WAP Settings.• Add bookmark:Adds the site you are currently browsing to your list of bookmarks.• View bookmarks:Displays a list of bookmarks.• Save items:Saves pictures, sounds or video clips in the appropriate My Items folder.• Go to URL:Inputs the URL of the site you wish to go to.• History:Displays a history list.• Forward:Moves to the next URL in the history list.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-61.png)
![Vodafone live! 61• Reload page:Refreshes the contents of the WAP page.• Advanced...:• Show URL:Displays the URL of the site you are currently browsing.• Save page:Saves the page you are currently browsing to your list of Snap Shots.• Snapshots:Displays a list of Snap Shots.• Alert inbox:Displays a list of WAP push messages. You can receive push messages via WAP Services. This means that a service provider sends WAP content to your phone, without any set up.• Settings:Includes “Downloads”, etc.• Security:Sets the security.• Clear...:Clears history, cache, etc.• Restart Browser:Restarts the browser.BookmarksWhen you are browsing, press [Options] and select the appropriate option.To Add a Bookmark1. Select “Add bookmark”.To Access Bookmarked Pages1. Select “View bookmarks”.2. Select the desired bookmark.To Edit Bookmarks1. Select “View bookmarks”.2. Select “More…”.3. Highlight a bookmark page you wish to edit.4. Press [Options] and select “Details”.5. Edit the title, then press b.6. Edit the URL, then press b.7. Select “Save”.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-62.png)
![62 Vodafone live!To Delete Bookmarks1. Select “View bookmarks”.2. Select “More…”.3. Highlight a bookmark page you wish to delete.4. Press [Options] and select “Delete”.5. Press [Options] and select “OK”.Setting the Hotkeys to Web Page BookmarksYou can access Web pages quickly by pressing the shortcut keys (hotkeys). Follow the following to assign shortcuts:1. Select “View bookmarks”.2. Select “More…”.3. Highlight a bookmark page you wish to edit.4. Press [Options] and select “Hotkeys”.The list of hotkeys is displayed.5. Select the number to which you wish to assign hotkeys.The list of registered bookmarks is displayed.6. Select the desired bookmark.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-63.png)
![My Items 63My ItemsMy Items contains several types of picture, sound and video clip data. Also included in My Items are frequently used text message phrases and accessed WAP pages (addresses) which you can use. You can also transmit picture, sound and video clip data via Bluetooth wireless technology to OBEX-enabled phones.Note• The phone can store approximately 2100 KB of data across Pictures, Games & More, Sounds and Videos.PicturesPictures that are taken by a digital camera or images that are downloaded from mobile Internet sites can be managed. You can register pictures in the following formats: JPEG, PNG, BMP, GIF, WBMP, and WPNG.Viewing Pictures“My Items” → “Pictures” → “Saved Pictures”1. Select the file you wish to view.The selected picture is displayed.Using Images as Wallpaper“My Items” → “Pictures” → “Saved Pictures”The list of pictures is displayed.1. Highlight the file you wish to use as wallpaper.2. Press [Options] and select “Set as Wallpaper”.3. Specify the area you wish to display using the navigation keys. (M 6) (M 6-1)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-64.png)
![64 My ItemsSaving to Contacts ListYou can use this option only for pictures saved in the handset memory.“My Items” → “Pictures” → “Saved Pictures”1. Highlight the file you wish to add to Contacts List.2. Press [Options] and select “Add to Contact”.To overwrite, select “Existing Contact” and select the data you wish to save to.If the picture size exceeds 240 dots in width or 320 dots in height, specify the area you wish to display.To save as a new entry, select “New Contact”.For details on entering a name, see “Add New Contact” on page 32.Editing Pictures“My Items” → “Pictures” → “Saved Pictures”1. Highlight the file you wish to edit.2. Press [Options] and select “Edit”.3. Select the desired option:“Rotate”: The picture is rotated 90º anticlockwise. Press [Rotate] again for another 90º.“Adjust Size”: Select the desired option.“Retouch”: Select the retouching option.“Add Frame”: Select the desired frame pattern.“Add Stamps”: Press [Stamps] and select the desired stamp pattern. Repeat this step to add more patterns.Note• The size of pictures that you can retouch is 52 dots [W] × 52 dots [H] minimum.• The size of pictures that you can add stamps to is 48 dots [W] × 48 dots [H] minimum.• Images exceeding 240 [W] or 320 [H] are saved as 240 [W] × 320 [H] regardless of the original size.• “Adjust Size” may not be available depending on the original picture and copyright issued.Sending a Picture File“My Items” → “Pictures” → “Saved Pictures”1. Highlight the file you wish to send.2. Press [Options] and select “Send”.3. Select “As Multimedia” or “As Postcard”.For details on creating a message, see “Creating a New MMS” on page 47.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-65.png)
![My Items 65Note• The Postcard service is not available with some service providers. Please contact your service provider for more information.• Pictures protected with a copyright cannot be sent attached to a message.Tip• For details on transmitting My Items data, see “Sending My Items Data” on page 70.Uploading Picture FilesYou can upload your pictures to the Media Album.Note• This service is not available with some service providers. Please contact your service provider for more information.“My Items” → “Pictures” → “Saved Pictures”1. Highlight the file you wish to upload.2. Press [Options] and select “Send”.3. Select “To Album”.4. Press [Yes].Note• Pictures protected with a copyright cannot be uploaded.Downloading Picture Files“My Items” → “Pictures” → “More Pictures”The picture file download site is displayed.Games & MoreAlong with the preloaded application, downloaded applications are stored in Applications.Note• Applications can store up to 50 applications.Using ApplicationsVarious kinds of Vodafone specific applications can be used in this phone.To use applications, download the applications via the mobile Internet.Some applications offer the ability to connect to a network either within a game or network based application.Note• Applications may be both local (no connectivity) and network based (using the mobile Internet to update information/play games). The network may charge you more for using network-based applications. Please contact your service provider for more information. (M 6-1-3) (M 6-2)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-66.png)
![My Items 67Playing Back Sound Files“My Items” → “Sounds” → “Saved Sounds”1. Select the file you wish to play back.To stop playback, press e.Note• The volume varies depending on the Multimedia Volume settings (p. 97). The sound is deactivated when “Multimedia Volume” is set to “Silent”. To adjust the volume, press a (or d/the side-up key) or b (or c/the side-down key).Using the Sound Files as Ringtone“My Items” → “Sounds” → “Saved Sounds”1. Highlight the file you wish to use as ringtone.2. Press [Options] and select “Set as Ringtone”.The selected sound is automatically used for the ringtone of the current Profiles.Note• Files in AMR or WAVE format cannot be used for the ringtone.Sending a Sound File with MMS“My Items” → “Sounds” → “Saved Sounds”1. Highlight the file you wish to send.2. Press [Options] and select “Send”.3. Select “As Multimedia”.For details on creating a message, see “Creating a New MMS” on page 47.If you select a sound file created with the Melody Editor, add the following step 4. 4. Select the file format “SMAF”, “MIDI” or “i Melody”.Note• Sounds protected with a copyright cannot be sent attached to a message.• Only the first part of the data is converted if you select “i Melody” in step 4.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-68.png)
![68 My ItemsUploading Sound FilesYou can upload your sounds to the Media Album.Note• This service is not available with some service providers. Please contact your service provider for more information.“My Items” → “Sounds” → “Saved Sounds”1. Highlight the file you wish to upload.2. Press [Options] and select “Send”.3. Select “To Album”.If you select your original ringtone in step 1, perform the following, otherwise go to step 5.4. Select the file format “SMAF”, “MIDI” or “i Melody”.5. Press [Yes].Note•Sounds protected with a copyright cannot be uploaded.Downloading Sound Files“My Items” → “Sounds” → “More Sounds”The sound file download site is displayed.VideosVideo clips that are recorded by a video camera or video clips that are downloaded from mobile Internet sites can be managed.Playing Back Video Clip Files“My Items” → “Videos” → “Saved Videos”1. Select the file you wish to play back.2. Press e.To resume, press e again.To stop playback, press [Back].To return to the original size, press [×1].Note• The volume varies depending on the Multimedia Volume settings (p. 97). The sound is deactivated when “Multimedia Volume” is set to “Silent”. To adjust the volume, press a (or d/the side-up key) or b (or c/the side-down key). (M 6-3-4) (M 6-4)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-69.png)
![My Items 69Sending a Video Clip File with MMS“My Items” → “Videos” → “Saved Videos”1. Highlight the file you wish to send.2. Press [Options] and select “Send”.3. Select “As Multimedia”.For details on creating a message, see “Creating a New MMS” on page 47.Note• Video clips protected with a copyright cannot be sent attached to a message.Uploading Video Clip FilesYou can upload your video clips to the Media Album.Note• This service is not available with some service providers. Please contact your service provider for more information.“My Items” → “Videos” → “Saved Videos”1. Highlight the file you wish to upload.2. Press [Options] and select “Send”.3. Select “To Album”.4. Press [Yes].Note• Video clips protected with a copyright cannot be uploaded.Downloading Video Clip Files“My Items” → “Videos” → “More Videos”The video clip file download site is displayed. (M 6-4-3)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-70.png)
![70 My ItemsSending My Items DataChoose the appropriate menu.“My Items” → “Pictures” → “Saved Pictures”“My Items” → “Sounds” → “Saved Sounds”“My Items” → “Videos” → “Saved Videos”1. Highlight the desired file.2. Press [Options] and select “Send”.3. Select “Via Bluetooth”.For “Via Bluetooth”The phone starts searching for Bluetooth wireless technology enabled devices within 10 metres.When detected, a list of enabled devices is displayed allowing you to select the desired device. The connection can be established and the file is sent.Note• Pictures/Sounds/Video clips protected with a copyright cannot be sent.• When pairing, you need to enter your passcode when establishing contact with a Bluetooth wireless technology enabled device for the first time except when “Authentication” (p. 92) is set to “Off”.Receiving the My Items DataWhen the phone receives the My Items data, a confirmation message appears.1. Press [Yes].The received data is registered in the corresponding My Items folder.Press [No] to reject.Tip• For details on Bluetooth wireless settings, see “Connectivity” on page 90.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-71.png)
![My Items 71Text TemplatesYou can register up to 20 text templates for use in text messages and multimedia messages.120 characters may be registered in any text template.Adding Phrases to Text Templates“My Items” → “Text Templates”1. Select the number you wish to register.2. Enter the text and press e.Editing Text Templates“My Items” → “Text Templates”1. Highlight the text template you wish to edit.2. Press [Options] and select “Edit”.3. Enter new text and press e.Viewing Text Templates“My Items” → “Text Templates”The list of Text Templates is displayed.1. Highlight the text template you wish to view.2. Press [Options] and select “View”.Deleting Text Templates“My Items” → “Text Templates”1. Highlight the text template you wish to delete.2. Press [Options] and select “Delete”.Memory StatusThis function helps you to check the memory status of My Item. Memory status covers Applications, Pictures, Sounds, and Videos.“My Items” → “Memory Status” (M 6-5) (M 6-7)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-72.png)
![72 Games & MoreGames & MoreApplicationsThe list of Java™ applications is displayed.Downloaded applications are displayed in order starting from the latest one.Executing ApplicationsFor details on executing applications, see “Executing Applications” on page 66.Showing Application Details“Games & More” → “Applications”1. Highlight the desired Java™ application.2. Press [Options] and select “Application Details”.The detailed information is displayed.Setting PermissionWhen using Java™ applications that access the network, online security for monetary transactions can be set with this option.To Select the Function and Confirmation Method“Games & More” → “Applications”1. Highlight the desired Java™ application.2. Press [Options] and select “Permission”.3. Select “Network Access” to set how the Java™ application accesses the network.4. Select the desired confirmation method.Always Connect: Allows the Java™ application access without confirmation.First Time: Informs you when the Java™ application accesses the network for the first time. If access is allowed, no more confirmations are made until you delete the application.Per Session: Informs you when the Java™ application accesses the network for the first time. If access is allowed, no more confirmations are made until the application finishes operation.Per Access: Informs you every time the Java™ application accesses the network regardless of whether or not access is allowed.Never Connect: Prevents the Java™ application from accessing the network and no confirmation is made. (M 1) (M 1-1)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-73.png)
![Games & More 73To Reset PermissionsYou can reset all permissions you made.“Games & More” → “Applications”1. Highlight the desired Java™ application.2. Press [Options] and select “Permission”.3. Select “Reset Permissions”.ScreensaversYou can download screensaver applications for the standby screen.“Games & More” → “Screensavers” → “Switch On/Off”1. Select “On” or “Off”.Note• If you select “On” and a screensaver application is not set, a list displaying available screensavers appears, asking you to make a selection.Set Application“Games & More” → “Screensavers” → “Set Application”The downloaded applications are displayed.1. Select the desired screensaver application.Resume TimeYou can set the time period for the screensaver application to activate.“Games & More” → “Screensavers” → “Resume Time”1. Enter the resume time in two digits using the digit key.More GamesYou can download applications.“Games & More” → “More Games”The application download site is displayed.1. Select the application you wish to download.The WAP browser is started and a confirmation message will appear asking to confirm download.2. Press e to start downloading.3. Press e when finished. (M 1-2) (M 1-2-2) (M 1-2-3) (M 1-3)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-74.png)
![76 ApplicationsApplicationsSIM ApplicationYou can refer to the information on the SIM. Contact your service provider for further details.AlarmsSetting the AlarmsThe alarm function allows you to be alerted at a specified time.Note that the alarm may not function correctly if the clock has not been set.Note• The alarm functions even if the phone is switched off.• The alarm will not ring when “Ringer Volume” (p. 94) is set to “Silent”.“Applications” → “Alarms”1. Select the blank setting.2. Enter the desired time.To Change the Type of Alarm Tone3. Select “Set Alarm Tone”.4. Select “Tone”.5. Select “Preset Sounds” or “My Sounds”.6. Select the desired tone.For details on selecting a tone, see “Assigning Ringtone” on page 94.To Change the Vibration of Alarm Tone7. Select “Vibration”.8. Select “On”, “Off” or “On & Link to Sound”.For details on selecting a vibration, see “Vibration” on page 95.To Change the Duration of Alarm Tone9. Select “Duration”.10.Enter the desired time (02-59).11.Press [Back].To Set the Repeating Option12.Select “Repeat Daily”.13.Select “On” or “Off”.14.Press [Save]. (M 3) (M 3-1) (M 3-2)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-77.png)
![Applications 77Editing the Alarm Setting“Applications” → “Alarms”1. Select the desired setting and edit it.Resetting an Alarm Setting“Applications” → “Alarms”1. Select the alarm you wish to reset.2. Select “Reset Alarm”.Resetting All Alarm Settings“Applications” → “Alarms” → “Clear All”Deactivating or Activating an Alarm“Applications” → “Alarms”1. Highlight the alarm you wish to deactivate or activate.2. Press [Options] and select “Switch Off” or “Switch On”.CalculatorThe calculator function performs the 4 arithmetic calculations using up to 12 digits.“Applications” → “Calculator”The calculator is displayed on the display.Key operations for calculation are as follows:To enter a decimal point, press R.To clear the entered number or operand, press [Clear].To do the calculations, press e.To start a new calculation, press [Clear]. (M 3-3)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-78.png)
![78 ApplicationsRate ConversionYou can also use the calculator as a currency calculator to convert from/to a home currency using a conversion rate that you enter.To Set a Currency Conversion Rate“Applications” → “Calculator” → [Options] → “Exchange Rate”1. Select “Foreign -> Domestic” or “Domestic -> Foreign”.2. Enter the currency conversion rate.To delete all digits, press [Clear].To Convert a Value“Applications” → “Calculator”1. Enter the value to be converted.2. Press [Options] and select “In Domestic” or “In Foreign”.The result is displayed.Note• You cannot perform step 2 when an arithmetic symbol (+, −, × or ÷) is displayed.Voice RecorderThis allows you to record a voice clip of up to 60 seconds, which can be used to remind you of schedule entries or be sent within a multimedia message. The recorded voice clip is registered in Saved Sounds. Voice clips are saved in “.amr” format.Recording a Voice Clip“Applications” → “Voice Recorder”1. Press e to start recording.To stop recording before the recording time is over, press e.2. Select “Save” to save the voice clip.To play back the recorded voice clip, select “Playback”.To record a voice clip again, press [Cancel].Note• To change recorded size before recording, press [Options] and select “Record Size”. Then select “Extended Voice” or “For Message”.• When the Message Size described on page 51 is set to “100 KB”, “Record Size” is not displayed. (M 3-4)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-79.png)
![80 Applications5. Press P or R to specify the types of musical notes or rest.For details on specifying the musical notes and rest, see also “To Specify the Types of Notes and Rests” on page 81.6. Press d after inputting one note.Input the next note after the cursor moves to the right.7. Repeat steps 4 to 6 to input notes.When entering notes, you can do the following:• Press e to play back all input notes.• Press [Options] and select:“Play before Cursor” to play back notes up to the cursor position.“Select Part” to select another chord.“Set Tone” to set or change the tone using different instruments. (p. 82)“Set Strength” sets the strength of the tone. (p. 82)8. When you finish inputting, press [Options] and select “Save”.9. Select “Save to My Items”.Note• The volume varies depending on the Multimedia Volume settings (p. 97). The sound is deactivated when “Multimedia Volume” is set to “Silent”.• If the capacity or memory in Saved Sounds becomes insufficient, the message, “Maximum capacity: 250 Not registered.” or “Not registered. Memory full.” is displayed. The screen returns to step 9. Try again after deleting unnecessary data.• Melodies consisting of too many short notes (semiquavers and triplets) cannot be played back in step 8 and the following message is displayed: “Can not play due to too many notes per sec.” The screen returns to step 5. The message “Can not save due to too many notes per sec.” may also be displayed, and the screen returns to step 5.Reduce the number of melodies, replace short notes, cancel triplets, etc. to remedy.To Specify the Musical Scale and RestUsing the keys shown below, specify the musical scale and rest.Do Re Mi Fa Sol La TiRestGHIJKLMQ](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-81.png)
![82 ApplicationsTo Set the ToneThe phone can play notes using different instruments.You can select from 128 basic tones (8 types of: Pianos, Chimes, Organs, Guitars, Basses, Strings 1, Strings 2, Brasses, Reeds, Flutes/Pipes, Synth Leads, Synth Pads, Synth Effects, Ethnics, Percussions, and Effects) and 61 extended tones (40 types of Drums (FM) and 21 types of Drums (WT)).1. Press [Options] and select “Set Tone” in step 7 on page 80.2. Press c or d to highlight a category of the tone.3. Press a or b to highlight a tone.4. Press e.Now you can create an original ringtone.Tip• You can play back the melody in the selected tone by pressing [Options] and select “Play Current Part” in step 4, or play back the syllable names in the selected tone by selecting “Confirm Tones” instead.To Set the Strength of the ToneThe strength of the tone can be set in 3 levels for each part.When you purchase this phone, the strength of the tone is set to “Loud”.1. Press [Options] and select “Set Strength” in step 7 on page 80.2. Select a strength of the tone.Now you can create an original ringtone.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-83.png)
![Applications 83Editing Original Ringtones“Applications” → “Melody Editor” → “My Sounds”1. Highlight an original ringtone you wish to edit.2. Press [Options] and select “Edit Melody”.3. Edit the title.4. Select a tempo and number of voices.5. Edit the data.6. When you finish editing, press [Options] and select “Save”.7. Select “Save to My Items”.8. Select “Overwrite” or “New”.Note• When the number of voices is modified in step 4, a confirmation message may be displayed. When you press [Yes], a section of the melody may be deleted.Tip• You can delete the melody after or before the cursor by pressing [Options] and selecting “Delete after Cursor” or “Delete before Cursor”.Copying and Pasting NotesYou can copy and move a part of the melody to another position.Only original ringtones or editable melodies can be copied or moved.1. In the Score input screen, press [Options] and select “Copy” or “Cut”.2. Move the cursor to the first note to be copied or to be cut, then press e.3. Move the cursor to the last note to highlight the area, then press e.4. Press [Options] and select “Paste”.5. Move the cursor to the point you wish to paste the notes, then press e.Phone HelpYou can view the help list and use it to guide you in the phone’s functions.“Applications” → “Phone Help”1. Press a or b. (M 3-5-2) (M 3-6)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-84.png)
![84 CalendarCalendarCalendar allows you to easily schedule appointments, which are associated with the date and time.These entries can also be sent via Bluetooth wireless technology to a PC to share the same schedules.Creating a New Entry“Calendar”1. Highlight the desired day to which you want to add an event.2. Press [Options] and select “Add New Entry”.3. Enter the subject.4. Enter the location.5. Select the desired category.6. Enter the start date.7. Enter the start time.8. Select the desired duration.9. Select the desired reminder option.Note• The reminder function sounds even if the phone is switched off.• The reminder will not sound when “Ringer Volume” (p. 94) is set to “Silent”.• When selecting “Other” in step 8, you can enter the desired end date and time.• When selecting “Other” in step 9, you can enter the desired date and time.• On the date entry screen when entering “Start Date” in step 6 or choosing “Other” in steps 8 and 9 and so on, press [Options] and select “Refer to Calendar” to make it easier to find the desired date from the monthly calendar that is displayed. (M 7)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-85.png)
![Calendar 85Editing the Reminder Tone“Calendar”1. Select the day including schedule entries the reminder tone of which you wish to edit.2. Highlight the desired entry.3. Press [Options] and select “Edit”.4. Select the reminder field and select the desired option.If you select “No Reminder”, the reminder is turned off.5. Select “Tone” and select “Preset Sounds” or “My Sounds”.6. Select the desired tone.For details on selecting a tone, see “Assigning Ringtone” on page 94.7. Select “Vibration” and select from “On”, “Off” or “On & Link to Sound”.For details on selecting a vibration, see “Vibration” on page 95.8. Select “Duration” and enter the desired time.9. Press [OK].10.Press [Save].Sending a Schedule Entry“Calendar”1. Select the day including schedule entries you wish to send.2. Highlight the desired entry you wish to send.3. Press [Options] and select “Send”.4. Select “Via Bluetooth”.For “Via Bluetooth”The phone starts searching for Bluetooth wireless technology enabled devices within 10 metres.When detected, a list of enabled devices is displayed allowing you to select the desired device. The connection can be established and the entry is sent.Note• When pairing, you need to enter your passcode when establishing contact with a Bluetooth wireless technology enabled device for the first time except when “Authentication” (p. 92) is set to “Off”.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-86.png)
![86 CalendarReceiving a Schedule EntryWhen the phone receives a schedule entry, a confirmation message appears.1. Press [Yes].The received entry is registered in the Calendar.Press [No] to reject.Tip• For details on making Bluetooth wireless settings, see “Connectivity” on page 90.Viewing an Entry“Calendar”1. Select the day including schedule entries you wish to view.The list of entries is displayed.2. Select the desired entry.Press d to switch entries, if available, in the selected day.To Search By Date1. In the monthly or daily view, press [Options].2. Select “Go to”.3. Select “Today” to display today or “Enter date” to enter the desired date.To Search By Subject1. In the monthly or daily view, press [Options].2. Select “Find”.3. Enter the desired text.To Change the Week Format1. In the monthly view, press [Options].2. Select “Week Format”.3. Select “Monday-Sunday” or “Sunday-Saturday”.Deleting Entries1. In the monthly or daily view, press [Options].2. Select “Delete”.3. Select the desired option.• “This Entry” (daily view only): Deletes the selected entry.• “All this Day”: Deletes all entries for the selected day.• “All this Month”: Deletes all entries for the selected month.• “Up to Last Month”:Deletes all entries before this month.• “All Entries”: Deletes all entries in this application.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-87.png)
![Contacts 87ContactsCall LogThe phone will record the last 10 missed calls, received calls and dialled numbers.Viewing Call Log“Contacts” → “Call Log”1. Press c or d to switch logs between “All Calls”, “Dialled Numbers”, “Missed Calls” and “Received Calls”.The selected call log list is displayed.2. Select the phone number you wish to view.If you wish to dial the number, press D.Tip• You can also confirm call logs by pressing D during standby mode.Sending Messages1. In call log list, highlight the call log you wish to send a message to.2. Press [Options] and select “Create Message”.3. Select “Multimedia”, “Text” or “Postcard”.For details on creating a message, see “Creating a New MMS” on page 47 or “Creating and Sending a New SMS” on page 54.Note• The Postcard service is not available with some service providers. Please contact your service provider for more information.Deleting a Call Log1. In call log list, highlight the call log you wish to delete.2. Press [Options] and select “Delete”. (M 8) (M 8-2)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-88.png)
![Settings 91Handsfree DevicesYou can activate, rename, and delete the paired handsfree device in the list.To Activate a Device“Settings” → “Connectivity” → “Bluetooth” → “Handsfree Devices”1. Select the device you wish to activate.Tip• You can save battery power by turning the Bluetooth wireless function off whilst it is not in use. Turn the Bluetooth wireless function off in “To Turn On or Off” on page 90 or in “To Turn Off Automatically” on page 92.• During a call, you can divert voice call to the paired device. Press [Options] and select “Enable Bluetooth”. If you wish to disconnect the paired device, select “Disable Bluetooth”.To Rename a Device“Settings” → “Connectivity” → “Bluetooth” → “Handsfree Devices”1. Highlight the device you wish to rename.2. Press [Options] and select “Change Name”.3. Rename the device.To Clear a Device Name“Settings” → “Connectivity” → “Bluetooth” → “Handsfree Devices”1. Highlight the device you wish to clear.2. Press [Options] and select “Delete”.Paired DevicesYou can rename and delete the paired device in the list.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-92.png)
![Settings 93ProfilesTone sound and vibration set can be customised for each profile according to your environment.There are 6 profiles including one user definable profile: Normal, Meeting, Activity, Car, Headset and Silent.Activating a Profile“Settings” → “Profiles”1. Select the desired profile.Note• When a profile is set, the corresponding icon described on page 16 is displayed on the standby screen.Tip• Press and hold R to switch Profiles settings between Normal and Silent mode during standby.Customising Profiles“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select the setting you wish to customise and change as desired.For details about settings, see pages 94 to 98.4. Press [Save] when finished.Resetting Profile Settings“Settings” → “Profiles”1. Highlight the profile you wish to reset.2. Press [Options] and select “Set to Default”.3. Enter your handset code.The default handset code is “0000”. For details on changing the handset code, see “To Change Handset Code” on page 112. (M 9-2)](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-94.png)
![94 SettingsRinger VolumeYou can adjust the ringer volume to one of 6 levels or a step tone.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Ringer Volume”.The current volume level is displayed.4. Press a (or d) to increase the ringer volume or press b (or c) to decrease the ringer volume and then press e.To select “Step Tone”, press a (or d) at level 5.To select “Silent”, press b (or c) at level 1.Assigning RingtoneYou can select the ringtone from 23 tones including 5 patterns, 3 alerts, 10 sound effects and 5 melodies. You can also select a sound in Saved Sounds as the default ringtone excluding the AMR or WAVE format.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Assign Ringtone”.4. Select “Preset Sounds” or “My Sounds”.5. Select the ringtone you wish to use.To hear the demo play, press e. To stop playing, press e again.6. Press [Options] and select “Assign”.Note• If you delete a ringtone that uses a sound in Saved Sounds, the default ringtone is set.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-95.png)
![Settings 95VibrationWhen the vibrator option is set on, the phone will vibrate for incoming calls regardless of the ringer volume and tone settings.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Vibration”.4. Select from “On”, “Off” or “On & Link to Sound”.Tip• When the “On & Link to Sound” option is selected in step 4, the vibrator synchronises with your selected melody to pulse in time with the melody. Please note that not all melodies support the “On & Link to Sound” option. Should you select such a melody, only the “On” option in step 4 will allow vibrator function.• When you select “On” or “On & Link to Sound” in step 4, “ ” is displayed on the standby screen.AlertsYou can personalise profiles for alerts including warning tone, message alert and low battery alert.Warning ToneYour phone emits the warning tone when an error occurs.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Alerts”.4. Select “Warning Tone”.5. Select “Switch On/Off”.6. Select “On” or “Off”.7. Select “Volume” and select from “High”, “Middle” or “Low”.8. Select “Tone” and select “Preset Sounds” or “My Sounds”.9. Select the desired tone.For details on selecting a tone, see “Assigning Ringtone” on page 94.10.Select “Duration” and select the desired time.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-96.png)
![96 SettingsMessage AlertWhen receiving messages, special ringtones can be set.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Alerts”.4. Select “Message Alert”.5. Select from “Multimedia”, “Text” or “WAP”.6. Select “Volume” and select the desired volume.7. Select “Sound” and select “Preset Sounds” or “My Sounds”.8. Select the desired ringtone.For details on selecting a ringtone, see “Assigning Ringtone” on page 94.9. Select “Vibration” and select from “On”, “Off” or “On & Link to Sound”.For details on selecting a vibration, see “Vibration” on page 95.10.Select “Duration” and enter the desired time.Low Battery AlertAdjust the volume of the alert when the battery becomes low.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Alerts”.4. Select “Low Battery Alert”.5. Select from “High”, “Low” or “Silent”.Keypad TonesWhen the keypad tone is set on, you will hear a confirmation tone each time you press any keys.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Keypad Tones”.4. Select “Switch On/Off”.5. Select “On” or “Off”.6. Select “Volume” and select from “High”, “Middle” or “Low”.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-97.png)
![Settings 977. Select “Tone” and select from “Preset Sounds”, “My Sounds” or “Default Tone”.When selecting “Default Tone”, go to step 9.8. Select the desired tone.For details on selecting the tone, see “Assigning Ringtone” on page 94.9. Select “Duration” and select the desired time.Multimedia VolumeYou can adjust volume for Video Camera, Voice Recorder, Melody Editor, My Items, browser and multimedia messages.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Multimedia Volume”.The current volume level is displayed.4. Press a (or d) to increase the volume or press b (or c) to decrease the volume and then press e.To select “Silent”, press b (or c) at level 1.Power On Sound/Power Off SoundThe phone can be set to emit a sound when it is switched on or off. You can define the volume, duration and the melody to be used for this task.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Power On Sound” or “Power Off Sound”.4. Select “Switch On/Off”.5. Select “On” or “Off”.6. Select “Volume” and select the desired volume.7. Select “Sound” and select “Preset Sounds” or “My Sounds”.8. Select the desired sound.For details on selecting a sound, see “Assigning Ringtone” on page 94.9. Select “Duration” and enter the desired time.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-98.png)
![98 SettingsEcho CancelThis function is for cancelling irritating echoes, especially when using the handsfree car kit.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Echo Cancel”.4. Select “On” or “Off”.Any Key AnswerYou can also answer a call by pressing any key except F or [Busy]. For details, see page 20.“Settings” → “Profiles”1. Highlight the profile you wish to customise.2. Press [Options] and select “Personalise”.3. Select “Any Key Answer”.4. Select “On” or “Off”.Auto Answer (for handsfree car kit only)Auto Answer function allows you to answer calls automatically by connecting the handsfree car kit for Bluetooth to your phone via Bluetooth wireless technology. You can select the desired time until your phone answers.“Settings” → “Profiles”1. Highlight “Car”.2. Press [Options] and select “Personalise”.3. Select “Auto Answer”.4. Select the desired time.Select “Off” to disable it.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-99.png)
![Settings 105Fixed Dialling No.When the Fixed Dialling No. is enabled, you can only call predefined numbers.Note• The Fixed Dialling No. is not available with some service providers or SIM cards. Please contact your service provider for more information.To Enable Fixed Dialling No.“Settings” → “Call Settings” → “Restrict Calls” → “Fixed Dialling No.”1. Enter your PIN2 code.2. Select “Switch On/Off”.3. Select “On” or “Off”.To Add a New Name“Settings” → “Call Settings” → “Restrict Calls” → “Fixed Dialling No.”1. Enter your PIN2 code.2. Select “Edit Dial List”.3. Select “Add New Contact”.4. Add a name and a phone number.For details on adding a name and a phone number, see “Add New Contact” on page 32.5. Press [Save].Changing the Network Password“Settings” → “Call Settings” → “Restrict Calls” → “Change Password”1. Enter the old network password.2. Enter a new network password.3. Enter a new network password again.If you enter the incorrect password, you are asked to enter the password again.4. Press e.Auto Redial (M 9-5-5)See “Automatic Redialling” on page 20.Minute Minder (M 9-5-6)Minute Minder function informs you of your talk time by sounding a tone after every minute.“Settings” → “Call Settings” → “Minute Minder”1. Select “On” or “Off”.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-106.png)
![110 Settings“Connection Type”:Bearer connection type (“GPRS Then CSD”, “GPRS” or “CSD”)“GPRS Settings”:“APN”*: Access point name“Username”: User name“Password”: Password“Linger Time”: Linger time (0-99999 sec.)“CSD Settings”:“Phone No.”*: Telephone Number“Line Type”: Line type (“ISDN” or “Analogue”)“Username”: User name“Password”: Password“Linger Time”: Linger time (0-99999 sec.)To Activate the WAP/MMS/Email Profile“Settings” → “Network”1. Select from “WAP Settings”, “MMS Settings” or “Email Settings”.2. Select the desired profile.To Edit the WAP/MMS/Email Profile“Settings” → “Network”1. Select from “WAP Settings”, “MMS Settings” or “Email Settings”.2. Highlight the desired profile.3. Press [Options] and select “Edit”.4. Edit the desired item.To Copy the WAP/MMS/Email Profile“Settings” → “Network”1. Select from “WAP Settings”, “MMS Settings” or “Email Settings”.2. Highlight the desired profile.3. Press [Options] and select “Copy”.4. Edit the new profile name.To Delete the WAP/MMS/Email Profile“Settings” → “Network”1. Select from “WAP Settings”, “MMS Settings” or “Email Settings”.2. Highlight the desired profile.3. Press [Options] and select “Delete”.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-111.png)
![114 Connecting GX29 to Your PCHandset ManagerYou can transmit the following items between your phone and your PC, and can use Contacts List entries on your PC.• My Items files (pictures/sounds/video clips)• Contacts List entries• Short messages• Schedule entriesTo use the Handset Manager function, see “PC Software” on page 92 and set your phone to Data Transfer mode.For details on software support, refer to the following site:http://www.sharp-mobile.comSoftware Installation1. Insert the supplied CD-ROM into your CD-ROM drive.The GX29 CD-ROM screen is displayed.If the GX29 CD-ROM screen is not displayed, double-click [Launcher.exe] in your CD-ROM.2. Press the desired button.The installation starts.3. Follow the on-screen instructions to complete installation.Note• The phone may not recognize the USB Data Cable if it is connected whilst an application (Camera, My Items, etc.) is running. Connect the USB Data Cable during standby.](https://usermanual.wiki/Sharp/HRO00046/User-Guide-628921-Page-115.png)
