Sharp HRO00047 PCS Cellular Phone W/ Bluetooth User Manual

Sharp Corporation PCS Cellular Phone W/ Bluetooth Users Manual

Users Manual

Declaration of Conformity
Hereby, Sharp Telecommunications of Europe Limited,
declares that this 550SH is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC.
A copy of the original declaration of conformity can be
found at the following Internet address:
http://www.sharp-mobile.com
Introduction 1
Introduction
Congratulations on your new 3G/UMTS 550SH phone.
About This User Guide
This user guide is carefully designed to help you learn
about your phone’s features and operations quickly and
effectively.
NOTICE
We strongly recommend that you keep separate
permanent written records of all important data. Data
may be lost or altered in virtually any electronic
memory product under certain circumstances.
Therefore, we assume no responsibility for data lost
or otherwise rendered unusable, whether as a result of
improper use, repairs, defects, battery replacement,
use after the specified battery life has expired or any
other cause.
We assume no responsibility, directly or indirectly,
for financial losses or claims from third parties
resulting from the use of this product and any of its
functions, such as stolen credit card numbers, the loss
or alteration of stored data, etc.
All company and/or product names are trademarks
and/or registered trademarks of their respective
holders.
Screen layout may differ from that illustrated in this
user guide.
The information described in this user guide is
subject to change without notice.
All the functions described in this user guide may not
be supported by all networks.
We assume no responsibility for downloaded
contents, information, etc. from the network.
Occasionally, a few black or bright pixels may appear
on the screen. Please note that this will not have any
impact on any of the features or on performance.
Copyright
According to copyright laws, the reproduction,
alteration and use of material which is protected by
copyright (music, pictures, etc.) is only permitted for
personal or private use. If the user is not in possession
of more extensive copyright or has not received the
explicit permission from the copyright owner to
reproduce, alter or use a copy which has been made or
modified in this way, this is considered to be a violation
of the copyright laws and gives the copyright owner the
right to claim for damages. For this reason, avoid the
illegal use of material which is protected by copyright.
Windows is a registered trademark of Microsoft
Corporation in the United States and/or other countries.
2Introduction
Powered by JBlend™ Copyright
1997-2005 Aplix Corporation. All rights
reserved.
JBlend and all JBlend-based trademarks
and logos are trademarks or registered
trademarks of Aplix Corporation in Japan
and other countries.
Powered by Mascot Capsule®/Micro3D Edition™
Mascot Capsule® is a registered trademark of HI
Corporation
©2002-2006 HI Corporation. All Rights Reserved.
Licensed by Inter Digital Technology Corporation under one
or more of the following United States Patents and/or their
domestic or foreign counterparts and other patents
pending, including U.S. Patents: 4,675,863: 4,779,262:
4,785,450: 4,811,420: 5,228,056: 5,420,896: 5,799,010:
5,166,951: 5,179,571 & 5,345,467
T9 Text Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,
5,945,928, and 6,011,554; Australian Pat. No. 727539;
Canadian Pat. No. 1,331,057; United Kingdom Pat. No.
2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842
463 (96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB;
Republic of Korea Pat. Nos. KR201211B1 and
KR226206B1; and additional patents are pending
worldwide.
CP8 PATENT
microSD™ is a trademark of the SD Card Association.
Bluetooth is a trademark of the Bluetooth SIG, Inc.
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Sharp is
under license. Other trademarks and trade names are
those of their respective owners.
Licensed by QUALCOMM Incorporated under one or more
of the following United States Patents and/or their
counterparts in other nations ;
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501
5,506,865 5,109,390 5,511,073 5,228,054 5,535,239
5,267,261 5,544,196 5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420 5,416,797 5,659,569
5,710,784 5,778,338
Introduction 3
This product is licensed under the MPEG-4 Visual Patent
Portfolio License for the personal and non-commercial use of
a consumer to (i) encode video in compliance with the
MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii) decode
MPEG-4 Video that was encoded by a consumer engaged in
a personal and non-commercial activity and/or was obtained
from a licensed video provider. No license is granted or
implied for any other use. Additional information may be
obtained from MPEG LA.
See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent
Portfolio License for encoding in compliance with the
MPEG-4 Systems Standard, except that an additional license
and payment of royalties are necessary for encoding in
connection with (i) data stored or replicated in physical media
which is paid for on a title by title basis and/or (ii) data which
is paid for on a title by title basis and is transmitted to an end
user for permanent storage and/or use. Such additional
license may be obtained from MPEG LA, LLC.
See http://www.mpegla.com for additional details.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
Useful Functions and Services
Your phone offers you the following features:
Video calls. You can talk while viewing each other on respective
screens.
3D and colour Java™ games. You can also download various games
and applications from Vodafone live! portal.
Thin Film Transistor (TFT) colour LCD display with images that are
clearer and easier to view.
A built-in digital camera for taking pictures and video clips.
A message function for reading and creating SMS messages.
MMS (Multimedia Messaging Services) for personalising your phone
in various ways.
Email for sending up to 300 KB and receiving mail with attachments.
A colour WAP browser for accessing information on Vodafone live!
portal.
Your own ringtones and ringvideos. You can use sound or video clip
files as a ringtone or ring video clip.
A music player that can play back MP3, MPEG-4 and 3GPP format
sound files (supported codec of MPEG-4 or 3GPP are AMR, AAC and
AAC+).
Playback of the downloaded sound and video clip files.
A voice recorder function for recording and playing back voice clips.
•A Bluetooth® wireless technology interface for establishing contact
and transmitting data with certain devices. You can transmit pictures,
sounds, and video clips to OBEX-enabled phones.
A data synchronisation function for updating Contacts List entries on
the Internet.
A schedule alarm for creating and sending schedule entries with alarm
settings.
A microSD™ memory card slot that expands connectivity with a PC
using the memory card.
4 Contents
Contents
Introduction ................................................. 1
Your Phone .................................................. 7
Optional Accessories ................................... 7
Getting Started ............................................ 8
Inserting the SIM Card and the Battery .... 11
Removing the SIM Card and the
Battery ....................................................... 12
Charging the Battery ................................. 13
Inserting/Removing the Memory Card ..... 14
Connecting the Stereo Handsfree .............. 16
Turning Your Phone On and Off ............... 16
Keypad Lock ............................................. 17
Display Indicators ..................................... 18
Navigating Functions ................................ 20
Voice Call/Video Call Functions ............... 21
Making a Voice Call ................................. 21
Speed Dialling ........................................... 22
Redialling .................................................. 22
Answering a Voice Call ............................ 22
In Call Menu (Voice Call) ......................... 23
Making a Video Call ................................. 26
Answering a Video Call ............................ 27
In Call Menu (Video Call) ......................... 27
Entering Characters ..................................30
Changing the Input Language .................... 31
Changing the Input Mode .......................... 31
My Dictionary ............................................ 32
Using Templates ........................................32
Using the Menu ..........................................33
Main Menu ................................................ 33
Shortcut Keys ............................................ 33
Contacts List ..............................................34
Changing the Name Order ......................... 34
Changing the List Displayed .....................34
Selecting the Storage Memory .................. 35
Sorting the Contacts List Entries ............... 35
Saving an Unregistered Number ................ 35
Add New Contact ......................................35
Viewing My Contact Details .....................36
Copying Contacts List Entries between
SIM Card and Handset .............................. 36
Finding a Name ......................................... 36
Contents 5
Dialling from the Contacts List .................36
Editing Contacts List Entries .....................37
Assigning a Ringtone or a Ring Video Clip
to Each Entry .............................................37
Registering Birthday Item to Calendar ...... 38
Deleting Contacts List Entries ...................38
Manage Category .......................................38
Contact Groups ..........................................39
Memory Status ...........................................40
Speed Dial List .......................................... 40
Sending a Contacts List Entry ...................41
Receiving a Contacts List Entry ................41
Sending a Voice Clip Message or Video
Clip Message Using an Address from the
Contacts List ..............................................41
Synchronising Contacts List Entries with
those on the Internet ................................... 42
Dialling a Service Phone Number ............. 43
Camera ....................................................... 44
Taking Pictures .......................................... 44
Recording Video Clips .............................. 45
Common Functions in the Photo and
Video Camera Modes ................................ 45
Functions in the Photo Camera Mode .......48
Functions in the Video Camera Mode .......50
Messaging ..................................................51
SMS ............................................................51
MMS ..........................................................51
Email ..........................................................51
Creating a New Message ............................52
Vodafone Messenger ..................................59
Messaging Settings ....................................64
Vodafone live! ............................................68
Navigating a WAP Page ............................69
Music .......................................................... 72
Music Player ..............................................72
My Items .....................................................75
Pictures .......................................................75
Music & Ringtones ....................................76
Videos ........................................................77
Themes .......................................................78
Other Documents .......................................78
Common Option Menus .............................79
Games & Applications ...............................83
Text Templates ...........................................83
Memory Status ...........................................83
Entertainment ............................................ 84
Games & Applications ...............................84
6 Contents
Settings ...................................................... 87
Mobile TV ................................................. 89
Streaming .................................................. 89
Videos ........................................................ 90
Calendar ..................................................... 93
Organiser & Tools ..................................... 98
Alarms ....................................................... 98
Calculator ................................................ 100
Voice Recorder ........................................ 101
Stopwatch ................................................ 102
Tasks ........................................................ 102
World Clock ............................................ 104
Countdown Timer ................................... 105
E-Book .................................................... 105
Expenses Memo ...................................... 106
Phone Help .............................................. 107
SIM Application ....................................... 108
Settings .................................................... 109
Phone Settings ......................................... 109
Connectivity ............................................ 122
Call Settings ............................................ 127
Network Settings ..................................... 133
Call Log .................................................... 139
Call Timers .............................................. 140
Data Counter ............................................ 140
Call Costs ................................................. 140
Connecting 550SH to Your PC ...............142
System Requirements .............................. 142
3G/GSM Modem ..................................... 142
Handset Manager ..................................... 143
Sync Manager .......................................... 143
Software Installation ................................ 144
Software Support ..................................... 144
Troubleshooting ......................................145
Safety Precautions and
Conditions of Use ....................................147
CONDITIONS OF USE .......................... 147
ENVIRONMENT .................................... 151
PRECAUTIONS CONCERNING
VEHICLE USE ........................................ 151
SAR ......................................................... 152
INFORMATION ON PROPER
DISPOSAL .............................................. 153
PRECAUTIONS FOR USE IN USA ...... 154
Index .........................................................156
List of Menu Functions ...........................159
Your Phone 7
Your Phone
Please check the following carefully. Your phone
should come complete with:
3G (UMTS)/GSM 900/1800/1900 GPRS phone
Rechargeable Li-ion Battery
AC Charger
Stereo Hands-free Kit
•CD-ROM
microSD™ Memory Card*
•User Guide
Quick Start Guide
* This item is not provided in some areas.
Optional Accessories
Li-ion Spare Battery (XN-1BT30)
Cigarette Lighter Charger (XN-1CL30)
USB Data Cable (XN-1DC30)
AC Charger (XN-1QC30, XN-1QC31)
Handsfree Microphone Unit (XN-1HU90)
Stereo Headset (XN-1HS90)
The above accessories may not be available in all
regions.
For details, please contact your dealer.
8 Getting Started
Getting Started
1
2
3
4
5
6
7
8
10
9
11
14
12
13
15
16
17
18
22
19
20
21
23
1. Earpiece
2. Navigation Keys (Arrow Keys):
Moves cursor to highlight a
menu item, etc.*
Up/Down arrow keys:
a b
Displays Contacts List
entries in standby.
a and b indicate in this
manual these keys.
Left arrow key:
c
Displays the “Create
Message” screen in
standby.
c indicates in this manual
this key.
Right arrow key:
d
Displays the monthly or
weekly calendar in standby.
d indicates in this manual
this key.
Getting Started 9
3. Centre Key:
B
Displays Main menu in
standby, and executes
functions.
4. Left Soft Key:
A
Executes the function in the
lower left of the screen.
Displays Main menu in
standby.*
5. Send/Redial Key:
D
Makes voice calls or
accepts calls, and displays
the call logs in standby.
6. Video Telephone Key:
SMakes video calls or
accepts calls, and displays
the call logs in standby.
7. Voicemail Key:
G
Press and hold to connect to
the Voicemail centre.
(Depending on the SIM
card.)
8. * /Shift Key:
P
Switches character case
between four modes: Abc,
ABC, 123 and abc on the
text entry screen.
Press to enter P, ?, – or * in
standby.
Press and hold in standby to
initiate keypad lock.
9. Sub Camera (Internal Camera)
10.Display
11.Right Soft Key:
C
Executes the function in the
lower right of the screen.
Accesses “Vodafone live!”
by opening the browser in
standby.*
12.End/Power Key:
F
Ends a call and turns power
on/off.
13.Shortcut Key:
U
Opens the Shortcuts menu
in standby.*
The Shortcuts menu
(p. 119) allows you to
change the default standby
assignment of the
Navigation, Left and Right
Soft and Shortcuts Keys (2,
4, 11 and 13).
10 Getting Started
14.Keypad
15.#/Silent Key:
R
Displays symbol screen on
the text entry screen.
Press and hold to switch
languages on the text entry
screen. Press and hold in
standby to switch Profiles
settings between the mode
most recently activated and
Silent mode.
16.Side Keys (V/W): Moves the highlight up or
down.
Press in standby or during a
call to increase or decrease
the earpiece volume.
Press during incoming call
to mute the ringer or
disable vibration mode
(when active).
17.External Connector:
Used to connect either the
charger or a USB data
cable.
18.Microphone
19.Built-in Aerial: Warning: Do not cover the
top of the phone with your
hand when in use as this
may interfere with the
performance of the built-in
aerial.
20.RF Connector
21.Camera (External Camera)
22.Battery Cover
23.Handsfree/Microphone Connector
* Default standby assignment can be changed via the
Shortcuts menu. See “Shortcuts” on page 119.
Getting Started 11
Inserting the SIM Card and the
Battery
1. Slide off the battery cover ( ).
2. Slide the SIM card into the SIM holder.
3. Hold the battery so that the metal contacts of the
battery are facing down, slide the guides on the top
of the battery into the battery slots , and then
insert it .
4. Replace the battery cover.
Note
Make sure that only 3V SIM cards are used.
Make sure that the standard accessory battery is
used.
2
1
SIM card
12 Getting Started
Removing the SIM Card and the
Battery
1. Ensure that the phone is turned off and that the
charger and other accessories are disconnected.
Slide off the battery cover.
2. Lift the battery using the protruding edge and
remove the battery from the phone.
3. Hold down gently while sliding the SIM card
out of the SIM holder .
Battery Disposal
The device is battery-powered. In order to protect the
environment, please read the following points
concerning battery disposal:
Take the used battery to your local waste depot,
dealer or customer service centre for recycling.
Do not expose the used battery to a naked flame,
immerse in water or dispose with the household
waste.
2
1
Getting Started 13
Charging the Battery
You must charge the battery for at least 160 minutes
before using your phone for the first time.
Using the Charger
1. Open the cover of the external connector, connect
the charger to the external socket located at the
bottom of the phone by pressing both sides
indicated with arrows, and connect to an AC outlet.
When the phone is charging, the battery status icon
( ) in the upper right of the screen displays the
current status.
Standard charging time: Approx. 160 minutes
Note
Charging time may vary depending on the state of the
battery and other conditions. (See “Battery” on
page 148.)
To Disconnect the Charger
When charging is complete, the battery indicator icon
displays the full charge status.
1. Unplug the charger from the AC outlet, then unplug
the charger connector from the phone.
2. Close the cover.
Note
Do not use any non-approved chargers as they may
damage your phone and invalidate any warranties,
see “Battery” on page 148 for details.
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power
for charging from the cigarette lighter socket of a car.
14 Getting Started
Battery Level Indicator
The current battery level is displayed in the upper right
of the display.
Low Battery during Use
When the battery is running low, an alarm will sound
and “ ” is displayed on the display.
If you are using your phone and you hear the low
battery alarm, attach your charger as soon as possible.
The phone may not be able to continue normal
operation if you continue to use it.
Inserting/Removing the Memory Card
Note
Do not push or pull on the card holder excessively as
it could break. The holder is thin and particularly
fragile.
Do not touch the metal terminals with your hands or
metal objects.
Make sure that the phone is turned off before
inserting/removing the memory card.
Be sure to insert the card in the correct direction and
orientation.
Keep all memory cards out of the reach of small
children.
To Insert the Memory Card
1. Turn off the phone.
2. Slide off the battery cover. Lift the battery using the
protruding edge and remove the battery from the
phone.
Battery Indicators Charge Level
Sufficiently charged
Charging recommended
Charging required
Empty
Getting Started 15
3. Slide the card holder as shown below in
(OPEN ) and insert the memory card as shown in
to .
4. Hold the battery so that the metal contacts are facing
down and slide them into the slots. Close the cover.
Tip
You see the following indicators when the memory
card is in use:
: Appears when the card is inserted.
: Appears when the card is damaged or unusable.
: Appears when the card is being written or read.
: Appears when the card is being formatted.
To Remove the Memory Card
1. Turn off the phone.
2. Slide off the battery cover. Lift the battery using the
protruding edge and remove the battery from the
phone.
3. While pressing down lightly on the cover, slide the
card holder as shown below in (OPEN ) and
remove the memory card as shown in to .
4. Hold the battery so that the metal contacts are facing
down and slide them into the slots. Close the cover.
16 Getting Started
Connecting the Stereo Handsfree
1. Open and rotate the handsfree connector cover
halfway around.
2. Connect the Stereo Handsfree.
Turning Your Phone On and Off
To turn the power on or off, press and hold F for
approximately 2 seconds.
To Enter the PIN Code
If the PIN (Personal Identification Number) code is
enabled you are asked to enter the PIN code each time
the phone is switched on. For details on setting the PIN
code, see “Enabling/Disabling the PIN Code” on
page 120.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press B.
Note
If your PIN code is entered incorrectly three times in
a row, the SIM card is locked. See “Enabling/
Disabling the PIN Code” on page 120.
If the clock settings have not been entered, the date
and time entry screen is displayed (p. 117).
Getting Started 17
To Copy All Contacts List Entries from the SIM
Card
When you insert the SIM card into your phone for the
first time and start the Contacts List application, you are
asked whether you wish to copy Contacts List entries
on the SIM card. Follow the on-screen instructions, or
you can do it later using the Contacts List menu as
follows:
“Contacts”
“Manage Contacts”
“Copy All
Entries
1. Select “From SIM to Handset”.
Keypad Lock
You can lock the keypad to prevent it from being
pressed accidentally.
Locking the Keypad
1. Press and hold P in standby.
Unlocking the Keypad
1. Press and hold P in standby.
Tip
Emergency numbers (112, etc.) can be entered and
dialled regardless of the keypad lock.
To lock the keypad automatically, see “Auto Keypad
Lock” on page 119.
18 Getting Started
Display Indicators
1. / : Strength of received signal/Service out
of range
: 3G (UMTS)/GPRS
/ : GPRS enabled/GPRS
disabled
: Roaming outside network
2. : Flight mode
3. : Data exchange with external device
4. / : Connection to the server [established/
communicating]
5. / : Voice call [incoming/in progress]
6. / / : Video call communication mode
enabled [voice and video/voice/video]
7. / / : Alerts [text message and multimedia
message/Email/Instant messenger]
8. / / : Mailbox full (SIM card only/handset
only/both SIM card and handset)
9. : Logging in the Vodafone Instant
messenger
10. : “Voice Calls” diverts set to “Always”
11.////:
Connection status
[USB cable/Bluetooth wireless setting
[enabled (in standby or except in
standby)/exchanging information/
talking with the Bluetooth headset/Hide
my phone]]
12. / / : Java™ application [executed (colour)/
suspended (grey)]/Music player
Right soft keyCentre keyLeft soft key
Indicator area
Getting Started 19
13. : Secure WAP page displayed
14.///:
Silent/vibration setting [silent/
increasing volume/vibration enabled/
silent and vibration enabled]
15. / / : Speaker mode [speaker phone/speaker
activated/microphone muted]
16. : Memory card inserted
17. : Battery level
18. : Daily alarm enabled
19. / : Schedule entry enabled [with/without
reminder alarm]
20. : Outbox contains unsent messages [text
message/multimedia/Email]
21. / / : WAP/OTA provisioning alerts [WAP
alert/OTA provisioning alert/WAP and
OTA provisioning alerts]
22. : Voicemail message alert
23. : Secret mode set to “On”
24. : Function Lock enabled
25. : Keypad Lock enabled
26.(No display)/////:
Current profile [Normal/Meeting/
Activity/Car/Headset/Silent]
20 Navigating Functions
Navigating Functions
All applications are accessed from the Main menu. To
open the Main menu, press the centre key B in
standby.
To launch applications, you will need to highlight menu
items, and make selections. To select a menu item
(indicated in quotation marks), move the cursor using
a, b, c and d, and press B to select.
In certain procedures, you will need to press one of the
soft keys (indicated in square brackets), which are
displayed in the lower left and right of the screen. Press
the corresponding soft key (A or C).
To return to the previous screen, press the right soft key
if it displays Back. To close the Main menu, press the
right soft key if it displays Exit.
Each section in this user guide starts with a list of items
you will need to select in order (indicated in italics)
before performing the procedures shown. Select each
item to reveal the next set of items that you have to
choose from. Open subsection items after opening
those listed in the main section.
Example:
“Contacts”
“Contacts List”
“Add New Contact”
Voice Call/Video Call Functions 21
Voice Call/Video Call
Functions
Making a Voice Call
1. Enter the area code and the phone number you wish
to dial and press D to dial.
If you enter the wrong number, press [Clear] to
delete the number to the left of the cursor.
Emergency Calls
1. Enter 112 (international emergency number) using
the keypad and press D to dial.
Note
Emergency calls may not be able to be made on all
mobile phone networks when certain network
services and/or phone features are in use. Contact
your service provider for more information.
This emergency number can normally be used to
make an emergency call in any country, with or
without a SIM card inserted, if a 3G (UMTS)/GSM
network is within range.
International Calls
1. Press and hold Q until a + (international dialling
prefix) sign is displayed.
2. Enter the country code, followed by the area code
(without the leading zero) and the phone number,
and press D to dial.
Adding an Entered Phone Number to the
Contacts List
1. After entering a phone number, press [Options] and
select “Save Number”.
For details on creating a new entry, see “Add New
Contact” on page 35.
Showing or Hiding My Phone Number on the
Display of the Called Party
1. After entering a phone number, press [Options],
select “Show My ID” or “Hide My ID” and press
D to dial.
22 Voice Call/Video Call Functions
Speed Dialling
Up to 8 phone numbers from the Contacts List memory
(Handset and SIM) can be assigned to speed dials. You
can call the numbers using the digit keys (G to O).
The phone number of the Voicemail centre is assigned
to G.
For details on setting the speed dial list, see “Speed Dial
List” on page 40.
1. To dial a number using the speed dial, press and
hold any of the digit keys (G to O).
The phone number saved in the speed dial list is
dialled.
Redialling
You can redial numbers in the call log. Select from
specific categories or “All Calls”. Specific categories
contain up to 30 numbers and the “All Calls” list
contains up to 90.
1. Press D in standby.
2. Select the category from “All Calls”, “Dialled
Numbers”, “Missed Calls” or “Received Calls”.
To switch logs, press c or d.
3. Highlight the phone number you wish to call.
4. Press D to redial a voice call or S to redial a
video call.
Answering a Voice Call
When an incoming call is detected, the phone rings.
1. Press D, B or press [Options] and select
“Answer” to answer the call.
Or press any key except F, [Options] or [Busy]
when the “Any Key Answer” function is enabled.
Set the Any Key Answer function in the profile of
each mode (p. 113).
Tip
If you have subscribed to the Calling Line
Identification (CLI) service and the caller’s network
sends the number, the caller’s number is displayed on
the screen. If the caller’s name and number are saved
in the Contacts List, the caller’s name is displayed on
the screen.
If the number is a restricted number, the display
shows “Withheld”.
When you receive a call from the person whose
picture is registered in the Contacts List, the picture
and name are displayed.
Voice Call/Video Call Functions 23
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call
you do not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a
busy tone to the caller.
In Call Menu (Voice Call)
Your phone has additional functions available while a
call is in progress.
Adjusting the Earpiece Volume
You can adjust the earpiece volume (and handsfree
volume, if connected) to five levels.
1. Press V or W to display the Earpiece Volume screen.
2. Press V (or a/d) to increase the volume of the call
or press W (or b/c) to decrease the volume.
3. Press B when the volume is set to the desired level.
Turning the Speaker On and Off
You can talk via the loudspeaker on the phone when it
is on.
1. During a call, press [Options] and select
“Loudspeaker On”.
Putting a Call on Hold
This function allows you to manage two calls at the
same time. If you wish to make another call while you
are talking to someone, you can put the current call on
hold to call someone else.
To Make Another Call during a Call
1. During a call, press [Options] and select “Hold”.
The current call is put on hold.
2. Press [Options] and select “Dial New Number”.
3. Enter the phone number you wish to make another
call to, then press D.
Tip
You can also make another call by entering the phone
number during a call instead of step 1. The current
call is automatically put on hold.
24 Voice Call/Video Call Functions
Accessing SMS/MMS Menu during a Call
1. During a call, press [Options] and select
“Messaging”.
The following options are available: “Create
Message” to make an SMS and MMS, or “Inbox”,
“Sent” or “Drafts” to access these folders. For
details on SMS and MMS, see “SMS” and “MMS”
on page 51.
Call Waiting
This service notifies you of another incoming call while
you have a call in progress.
1. During a call, press [Options] and select “Hold &
Answer” to answer the second call.
The first call is put on hold and you can now talk to
the second caller.
Note
You need to set “Call Waiting” to “On” if you wish
to use the Call Waiting service (p. 133).
Call Waiting service may not be available on all
networks. Contact your service provider for more
information.
If you do not wish to answer the second call, press
[Options] and select “Busy” in step 1. If “Reject” is
selected, the log of the second call is saved as a
missed call.
Conference Call
Conference call is a call with more than 2 participants.
You may include up to 5 participants in a conference
call.
To Make a Conference Call
You must have one active call and one held call.
1. During a call, press [Options] and select “Multi
Party”.
2. Select “Join All Calls” to join the conference call.
3. Press F to end the conference call.
Note
The conference call service may not be available on
all networks. Contact your service provider for more
information.
To end the call with all participants, press [Options]
and select “End All Calls”.
To reject adding more participants to the current
party, press [Options] and select “Reject”, or you
can send the busy tone by selecting “Busy”.
Voice Call/Video Call Functions 25
You have more options for the Conference call in step
2:
To put all participants on hold, select “Hold All”.
To put all participants except the current call on
hold, select “Private Conversation”.
To Add New Participants to the Conference Call
1. Press [Options] and select “Dial New Number”.
2. Enter the number you wish to include in the
conference call and press D to dial.
3. Press [Options] and select “Multi Party”.
4. Press [Options] and select “Join All Calls” to join
the conference call.
If you wish to add other participants, repeat steps 1
to 4.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that
you wish to disconnect from the conference call.
2. Press [Options] and select “End This Call”.
To Have a Private Conversation with One of the
Participants
If you wish to have a private conversation with one of
the participants, you may select the participant from the
conference list and put the other participants on hold.
1. During a conference call, select the person that you
wish to talk to.
2. Press [Options] and select “Multi Party”.
3. Press [Options] and select “Private Conversation”.
4. Once you have finished the private conversation,
press [Options] and select “Multi Party”.
5. Select “Join All Calls” to return to the conference
call.
Muting the Microphone
1. During a call, press [Mute].
To use the microphone again, press [Unmute].
26 Voice Call/Video Call Functions
Making a Video Call
Note
Use this function with only the video call enabled
phones.
Make sure that the battery is fully charged and the
signal is strong before using this function.
Turn the loudspeaker on or use a switch-equipped
Stereo Handsfree or handsfree kit so that you can talk
while looking at the video call screen on the display.
Video calls can only be made and received if you
have 3G coverage. See “Display Indicators” on
page 18.
During a video call the keypad, battery cover and
camera areas may heat up. This is not a malfunction.
Status Indicators
1. Sub screen for your image
2. Elapsed time
3. Main screen for the calling party’s screen
4. Calling party’s name or phone number
Making a Video Call
1. Enter the area code and the phone number you wish
to dial.
2. Press [Options] and select “Video Call” or press and
hold D or press S to dial.
If you enter the wrong number, press [Clear] to
delete the number to the left of the cursor.
When the line is connected, the image of the called
party is displayed upper on the screen, and yours
lower left.
Tip
If the called party’s phone is not video call enabled,
you can press F and enter the phone number again
to make a voice call.
When the call ends, the last call cost is displayed.
1
3
2
4
Voice Call/Video Call Functions 27
Answering a Video Call
When an incoming call is detected, the phone rings.
1. Press D to answer the call with video or press
[Options] and select “Hide Picture” to answer with
voice only.
Tip
When the call ends, the call cost is displayed.
If you have subscribed to the Calling Line
Identification (CLI) service and the caller’s network
sends the number, the caller’s number is displayed on
the screen. If the caller’s name and number are saved
in the Contacts List, the caller’s name is displayed on
the screen.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call
you do not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a
busy tone to the caller of an incoming call letting
them know that you cannot answer the call.
In Call Menu (Video Call)
Muting the Microphone
1. During a video call, press [Mute].
To use the microphone again, press [Unmute].
Swapping Images
You can swap images between the main and sub
screens.
1. During a video call, press [Options] and select
“Switch Images”.
Changing the Image of Yourself
1. During a video call, press [Options] and select
“Camera Picture”.
2. Select “Internal Camera”, “External Camera” or
“Alternative Image”.
“Internal Camera”: The image through the sub
camera is displayed and sent
to the party.
“External Camera”: The image through the
camera is displayed and sent
to the party.
28 Voice Call/Video Call Functions
“Alternative Image”: The camera is turned off and
the image selected in
“Alternative Image” of
“Video Call Settings” is
used.
Turning the Speaker On and Off
You can talk via the loudspeaker on the phone when it
is on.
1. During a video call, press [Options] and select
“Loudspeaker On”.
Note
In a high-noise environment, you may not be able to
continue a call, or make a clear call. We recommend
that you use the Stereo Handsfree.
With this option, there may be interruption if you
increase the earpiece volume. We recommend that
you decrease the earpiece volume or use the Stereo
Handsfree.
Video Call Settings
To Adjust the Quality of the Incoming or Outgoing
Image
You can adjust the quality of the called party’s or
caller’s image.
1. During a video call, press [Options] and select
“Video Call Settings”.
2. Select “Incoming Picture Quality” or “Outgoing
Picture Quality”.
3. Select “Normal”, “Quality Priority” or “Frame Rate
Priority”.
“Normal”: The standard quality is used.
“Quality Priority”: The quality of the picture
takes precedence over the
frame rate.
Frame Rate Priority
”: The frame rate takes
precedence over the quality.
Voice Call/Video Call Functions 29
To Turn the Backlight On or Off
You can turn on the backlight of your screen.
1. During a video call, press [Options] and select
“Video Call Settings”.
2. Select “Backlight”.
3. Select “Always On”, “Always Off” or “As Normal
Setting”.
When “Always On” is selected, the backlight will
always be on during a video call.
When “As Normal Setting” is selected, the
backlight will time out depending on the Backlight
setting (p. 116).
To Adjust the Video Exposure
1. During a video call, press [Options] and select
“Video Call Settings”.
2. Select “Exposure”.
3. Press a (Light) or b (Dark).
Mirror Image
During a video call, you can reverse your image on the
sub screen.
1. During a video call, press [Options] and select
“Video Call Settings”.
2. Select “Mirror Image”.
3. Select “On” or “Off”.
To Change the Sub Camera Image to the
Alternative Image
During a video call, you can switch the image shown to
the caller between the sub camera image and an
alternative image or display an image while putting a
call on hold from the saved picture files.
1. During a video call, press [Options] and select
“Video Call Settings”.
2. Select “Alternative Image” or “Hold Guidance
Picture”.
3. Select “Preset Picture” or “My Pictures”.
30 Entering Characters
Entering Characters
When entering characters to create Contacts List
entries, text messages or multimedia messages, etc.,
press the corresponding keys.
In multi-tap input method, press each key until the
desired character is displayed. For example, press H
once for the letter A or twice for the letter B.
Table of Characters
Pressing each key scrolls characters in the following
order. The order varies depending on the language
selected.
English Mode
Key Upper Case
Characters
Lower Case
Characters Numeric
G. (full-stop), (comma) - (hyphen) ? !
’ (apostrophe) @:1 1
HABC2 abc2 2
IDEF3 def3 3
JGHI4 ghi4 4
KJKL5 jkl5 5
LMNO6 mno6 6
MPQRS7 pqrs7 7
NTUV8 tuv8 8
OWXYZ9 wxyz9 9
Q(space) + = < > € £ $ ¥ % & 0 0
PSwitches character case between four modes:
Abc, ABC, 123 and abc.
R
.,?!:;-+#
@' "( )_&€£$
%/ ˜ <>§= \ | ¥
¿¡^[ ]{ }¤ÅÄ
Æå äæàÇÉèé ì
ÑñÖØöøòßÜü
ù∆ΦΓΛΩΠΨΣΘ
Ξ (space)
G- O:
Q
Press and hold to enter 0 - 9 numbers.
P: Press and hold to shift between
multi-tap and T9 mode.
R: Press and hold to display the Input
Language screen.
Key Upper Case
Characters
Lower Case
Characters Numeric
Entering Characters 31
Changing the Input Language
1. On the text entry screen, press [Options] and select
“Input Language”.
2. Select the desired language.
Changing the Input Mode
T9 Text Input
T9 text input method is a shortcut to enter text easily
and quickly.
1. On the text entry screen, press and hold P to enter
T9 mode.
2. Press [Options] and select “Input Mode”.
3. Select the input mode (Abc, ABC, 123, abc).
4. Press each key once for any letter you require on
that key.
To enter the word “How”, press JLO.
5. If the word shown isn’t the one you want, press a
or b until you highlight the correct one.
6. Press B to select the word.
Note
If the correct word is not shown in step 5, enter the
correct word again after switching to the multi-tap
input method.
Tip
If you press Q instead of step 6, a space is inserted
next to the selected word.
Symbols and Punctuation
1. On the text entry screen, press [Options] and select
“Add Symbol”.
2. Select the desired symbol.
32 Entering Characters
My Dictionary
You can create your own word list for T9 text input.
1. On the text entry screen in T9 mode, press [Options]
and select “My Dictionary”.
2. Select “Add New Word” and enter a new word.
Editing a Word in the List
1. On the text entry screen in T9 mode, press [Options]
and select “My Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the word.
Using Templates
You can use the phrases registered in Text Templates
when entering characters.
For details on creating the text template, see “Adding
Phrases to Text Templates” on page 83.
1. On the text entry screen, move the cursor to the
point you wish to insert the template.
2. Press [Options] and select “Advanced”.
3. Select “Insert Template”.
4. Select the desired text template.
Copying, Cutting and Pasting Text
1. On the text entry screen, press [Options] and select
“Advanced”.
2. Select “Copy” or “Cut”.
3. Move the cursor to the first letter to be copied or to
be cut, then press B.
4. Move the cursor to the last letter to highlight the
area, then press B.
5. Move the cursor to the point you wish to paste the
letters.
6. Press [Options] and select “Advanced”.
7. Select “Paste”.
Using the Menu 33
Using the Menu
Main Menu
1. Press B in standby.
The Main menu is displayed.
2. Press a, b, c or d to highlight the desired menu,
then press B to access the function.
For details on the menu options, see “List of Menu
Functions” on page 159.
Shortcut Keys
You can access menus by pressing B and digit keys for
the corresponding number on the Main menu. For
numbers 10 to 12, press B and P (10), Q (11) or
R (12). See “List of Menu Functions” on page 159.
Shortcuts are listed in the headings of this user guide.
Examples: To Access “Voice Message” Sub
Menu (M 5-1-2) Using Shortcut Keys
Press B KGH.
To Access “Phone Help” Sub Menu
(M 7-10) Using Shortcut Keys
Press B MP.
Note
The shortcut keys work for the first three menu levels
only.
34 Contacts List
Contacts List
You can store the phone numbers and Email addresses
of your friends, family and colleagues in the Contacts
List.
Your phone can store up to 500 entries. In a Contacts
List, you can save the following items:
Items Saved in the Handset Memory
Items Saved in the SIM Memory (depending on
the SIM card)
Changing the Name Order
“Contacts”
“Settings”
“Name Order”
1. Select “First-Last Name” or “Last-First Name”.
Changing the List Displayed
“Contacts”
“Settings”
“Contacts Location”
1. Select from “Handset”, “SIM” or “Both”.
If the selected location is different from the contact
storage memory, a confirmation message is
displayed.
First Name up to 32 characters
Last Name up to 32 characters
Phone Number up to 3 phone numbers (up to 32
digits each)
Email Address up to 3 Email addresses (up to
128 characters each)
Category 16 categories
Street & Number up to 64 characters
City up to 64 characters
State/Province up to 64 characters
Postal Code up to 20 characters
Country up to 32 characters
Note up to 256 characters
Birthday (date)
Picture (file name)
(M 8-1) Tone/Video for
Voice Call
(file name)
Tone/Video for
Video Call
(file name)
Tone/Video for
New Message
(file name)
Secret (On or Off)
Name up to 32 characters
Phone Number up to 32 digits
(M 8-8-1)
(M 8-8-2)
Contacts List 35
Selecting the Storage Memory
“Contacts”
“Settings”
“Save New Contact to”
1. Select from “Handset”, “SIM” or “Choose before
Saving”.
If the selected location is different from the list
displayed, a confirmation message is displayed.
Tip
“Choose before Saving” prompts you to choose the
memory every time you save a new entry.
Sorting the Contacts List Entries
You can change the listing order of the Contacts List
entries between by alphabetical order or by different
categories.
“Contacts”
“Settings”
“Sort Contacts”
1. Select “By Alphabet” or “By Category”.
Saving an Unregistered Number
After the call ends, you can have the confirmation
screen asking you if you wish to register the number to
Contact List.
“Contacts”
“Settings”
“Save Unregistered”
1. Select “Incoming Call” or “Outgoing Call”.
2. Select “On” or “Off”.
Add New Contact
You can choose either the phone or SIM card memory
locations to store the new entry. For switching
locations, see “Selecting the Storage Memory”.
The amount of phone numbers that you can store to the
SIM card is dependent on its capacity. Contact your
service provider for details.
“Contacts”
“Contacts List”
“Add New Contact”
If you select the “Choose before Saving” option for the
memory to be used, the selection is between “To
Handset” and “To SIM”.
1. Select the field you wish to fill in, and enter the
relevant information.
2. Press [Save], when finished.
Tip
To create an entry, at least one field must be filled
(“First Name”, “Last Name”, “Phone Number” or
“Email Address” for the handset memory; “Name”
or “Phone Number” for the SIM memory).
(M 8-8-3)
(M 8-8-4)
(M 8-8-5)
36 Contacts List
Viewing My Contact Details
You can register and edit your own contact as with
other Contacts List entries.
“Contacts”
“My Contact Details”
Copying Contacts List Entries
between SIM Card and
Handset
“Contacts”
“Manage Contacts”
“Copy All
Entries”
1. Select “From SIM to Handset” or “From Handset to
SIM”.
Note
When you insert the SIM card into your phone for the
first time and start the Contacts List application, the
confirmation screen is displayed automatically,
asking you if you wish to copy or not. The number of
Contacts List entries to be copied varies depending
on the SIM capacity.
If the memory space is not enough to save all entries,
you cannot complete copying.
Finding a Name
“Contacts”
“Contacts List”
1. Enter the first few letters of the name.
Search results are displayed in alphabetical order.
Tip
You can select the Contacts location from
“Handset”, “SIM” or “Both” before searching.
Dialling from the Contacts List
“Contacts”
“Contacts List”
1. Highlight the desired entry and press D (voice
call) or S (video call).
Tip
If more than one phone number is registered for the
entry, highlight the desired phone number after step
1 and press D (voice call) or S (video call).
You can also dial from the details screen of the
Contacts List. On the details screen, select the
desired phone number and press D (voice call) or
S (video call).
(M 8-5)
(M 8-9-1)
Contacts List 37
Editing Contacts List Entries
“Contacts”
“Contacts List”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Edit”.
3. Modify the information.
4. Press [Save] when finished.
Adding a Thumbnail to Entries
“Contacts”
“Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Picture”.
4. Select “Assign Picture”.
5. Select the desired picture.
6. Press [Save] when finished.
Note
If you delete a picture in the handset memory, the
corresponding thumbnail is also deleted.
To store a picture right after it was taken, select
“Take Picture” in step 4.
Assigning a Ringtone or a Ring Video
Clip to Each Entry
“Contacts”
“Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Assign Tone/Video”.
4. Select “For Voice Call”, “For Video Call” or “For
New Message”.
5. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 7.
6. Select “Preset Sounds” or “My Sounds”.
7. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video
clip, see “Assigning a Ringtone for an Incoming
Call” on page 110 or “Assigning a Ring Video Clip
for an Incoming Call” on page 111.
8. Press [Save] when finished.
38 Contacts List
Registering Birthday Item to
Calendar
A birthday entered in a contacts list entry can be
registered to the calendar.
“Contacts”
“Contacts List
1. Highlight the desired entry.
2. Press [Options] and select “View”.
3. Press d to display the second tab.
4. Press b to highlight the birthday entry.
5. Press [Options] and select “Set Reminder”.
6. Press “OK”.
Tip
After registration, the data in Calendar can be
customised. For details on customising a schedule
entry, see “To Change the Type of the Reminder Tone
or Video” and etc. on page 94.
If the Calendar memory is full, “Set Reminder” is not
displayed in step 4.
Deleting Contacts List Entries
Deleting All Contact Entries
“Contacts”
“Manage Contacts”
“Delete All
Entries”
1. Select from “Handset Entries”, “SIM Entries” or
“Both Entries”.
2. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 121.
Deleting a Contact Entry
“Contacts”
“Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Delete”.
Manage Category
Different ringtones can be set for each category. If you
do not change a category ringtone, the ringtone
assigned in the Profiles menu is used.
“Contacts”
“Manage Category”
1. Highlight the desired category.
2. Press [Options] and select “Assign Tone/Video”.
3. Select “For Voice Call”, “For Video Call” or “For
New Message”.
(M 8-9-3)
(M 8-3)
Contacts List 39
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “My Sounds”.
6. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video
clip, see “Assigning a Ringtone for an Incoming
Call” on page 110 or “Assigning a Ring Video Clip
for an Incoming Call” on page 111.
Editing the Category Name
You can edit category names to be assigned to the
Contacts List entries.
“Contacts”
“Manage Category”
1. Highlight the desired category name.
2. Press [Options] and select “Edit Name”.
3. Modify the name.
Contact Groups
You can create a mailing list to send the same message
to a group of recipients at once. Up to 5 groups can be
registered.
Creating a New Mailing List
“Contacts”
“Contact Groups”
“Add New
Group”
1. Enter the group name.
The new group name is displayed following the last
group on the Group List screen.
Adding Recipients to a Group
Up to 20 recipients can be registered in each list.
“Contacts”
“Contact Groups”
1. Select the desired group name.
2. Select “Assign New Entry”.
3. Select the desired entry.
The detailed screen is displayed.
4. Select the desired phone number or Email address.
(M 8-6)
40 Contacts List
Tip
If you modify the entry assigned in the group, you
need to re-assign it to the group. Highlight the entry,
press [Options], then select “Re-assign Entry” in
step 2.
To remove an entry from the group, highlight the
entry, press [Options], then select “Remove Entry”
in step 2.
To remove a group, highlight a group name and
press [Options] and then select “Delete” in step 1.
Sending a Message Using a Mailing List
“Contacts”
“Contact Groups”
1. Highlight the desired group name.
2. Press [Options] and select “Create Message”.
3. Select the desired type of messaging.
For further procedures, see “Creating a New
Message” on page 52.
Memory Status
This function helps you to check the memory used in
the Contacts List.
“Contacts”
“Manage Contacts”
“Memory
Status”
Speed Dial List
You can set a maximum of 8 phone numbers in the
Speed Dial list (p. 22).
Setting Contacts List Entries in the Speed Dial
List
“Contacts”
“Contacts List”
1. Select the desired entry.
2. Highlight the desired phone number.
3. Press [Options] and select “Add to Speed Dial”.
4. Select the desired location.
Tip
The nine digit keys (G - O) correspond to list
numbers.
To Edit the Speed Dial List
“Contacts”
“Speed Dial List”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Re-Assign” (or
“Assign”).
(M 8-9-2)
(M 8-4)
Contacts List 41
Sending a Contacts List Entry
“Contacts”
“Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Send Contact”.
3. Select “As Message” or “Via Bluetooth”.
For “As Message”
For details, see “MMS” on page 51.
For “Via Bluetooth”
For details, see “Bluetooth” on page 122.
Receiving a Contacts List Entry
When the phone receives a Contacts List entry, a
confirmation message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Contacts List.
Press [No] to reject.
Tip
For details on entering Bluetooth wireless settings,
see “Connectivity” on page 122.
Sending a Voice Clip Message or
Video Clip Message Using an
Address from the Contacts List
“Contacts”
“Contacts List”
1. Select the desired entry including the phone number
or Email address you wish to use.
2. Highlight the desired phone number or Email
address.
3. Press [Options] and select “Create Message”.
4. Select “Voice Message” or “Video Message”.
For further procedures, see “Creating a New
Message” on page 52.
42 Contacts List
Synchronising Contacts List Entries
with those on the Internet
The data synchronisation functions are a network
service which allow you to manage your Contacts List
from the phone and also via the Internet. The data in the
SIM card will not be synchronised. Subscribe to a
synchronisation service by contacting your network
service centre.
“Contacts”
“Synchronise”
There are three available synchronisation modes.
Note
If there are no active synchronisation settings
(M 8-7-5), these modes will not be available.
Synchronising the Contacts List
1. Select “Sync Now!” to synchronise the Contacts
List on the phone with those on the Internet server.
Full details of the rules for this method of
synchronisation can be obtained from your network
service centre or via the Internet server web page.
Backing up the Contacts List
1. Select “Backup” to save your Contacts List to the
Internet server.
This will overwrite any contacts data stored on the
server.
Restoring the Contacts List
1. Select “Restore” to retrieve the Contacts List on the
Internet server.
This will overwrite all contacts data currently stored
in the phone (SIM contacts are not affected). You
will be asked to verify the handset code before the
Restore action is performed. If an incorrect code is
entered, Restore will be terminated.
Viewing the Log
1. Select “View Log” to see the details of the last
synchronisation session.
(M 8-7)
(M 8-7-1)
(M 8-7-2)
(M 8-7-3)
(M 8-7-4)
Contacts List 43
Synchronisation Settings
“Contacts”
“Synchronise”
“Sync Settings”
1. Select the desired account or “Create New” to enter
the following settings.
“Profile Name”: Synchronisation profile
name (Unique name)
“Server Name”: Server address
“User ID”: User ID for authentication
“Password”: Password for authentication
“Proxy”: Selects Proxy setting for
synchronisation.
“Contacts DB Name”: Contacts List database name
on the server
Note
Synchronisation settings may have already been
entered in your phone depending on your service
provider. You may have restrictions on viewing,
deleting, copying or modifying the settings. Contact
your service provider for details.
Dialling a Service Phone Number
Certain SIM cards contain service phone numbers that
can be dialled. Contact your SIM card vendor for more
information. On the Contacts screen, “Service Dialling
No.” is displayed at the bottom of the list.
“Contacts”
“Service Dialling No.”
1. Select the desired service phone number.
Tip
If the SIM card contains only one service phone
number, you can dial it in step 1 by pressing B.
If no service phone number is stored in the SIM card,
this menu is not displayed.
(M 8-7-5)
(M 8-10)
44 Camera
Camera
Your phone has a built-in digital camera that allows you
to take pictures and record video clips wherever you
are. This section starts with basic functions and
operational procedures to take, save and send pictures
and video clips, followed by common and unique
functions to camera and video modes.
Taking Pictures
“Camera”
1. Press B to take the picture.
The shutter sounds and the still image of the taken
picture is displayed.
2. Press [Save].
The taken picture is saved in My Items.
To cancel, press [Cancel].
To send the taken picture, press B in step 2 and
select “As Message”, “As Postcard” or “To Media
Album” from the send option. (The Postcard and
Media Album service is not available with some
service providers. Contact your service provider for
more information.)
Note
When the video camera is launched, press [Options]
and select “Go to Photo Camera”, or press c.
When you try to send the picture that has too large a
file size, the picture size is resized for the message.
The original sized picture is saved in My Items.
(M 4)
Camera 45
Recording Video Clips
You can record a video clip with your phone.
“Camera”
The preview is displayed on the screen.
1. Press B.
2. To stop recording, press B.
3. Select “Save”.
The video clip is saved in My Items.
To view the preview before saving, select
“Preview”.
To send the video clip, select “Save and Send”.
Then select “As Message” or “To Media Album”.
(The Media Album service is not available with
some service providers. Contact your service
provider for more information.)
For further procedures, see “Creating a New
Message” on page 52.
Note
You can only send video clips when “For Message”
is selected for the recording time. For details, see
“Selecting the Recording Time” on page 50.
Common Functions in the Photo and
Video Camera Modes
Using the Digital Zoom Function
To Adjust the Zooming Ratio
1. Press a or b.
Once the phone has returned to standby, the zoom
settings return to default.
Adjusting the Exposure
“Camera”
[Options]
“Exposure”
1. Press a (Bright) or b (Dark).
: (Bright Normal Dark)
Once the phone has returned to standby, the brightness
settings return to default.
46 Camera
Using the Self-Timer
Select the appropriate option.
“Camera”
[Options]
“Modes”
“Self-timer”
(Photo Camera Mode)
“Camera”
[Options]
“Self-timer” (Video
Camera Mode)
1. Select “On” or “Off”.
” is displayed on the screen when you select
“On”.
Switching between the Photo and Video
Camera Modes
You can switch between the photo and video camera
modes by pressing c or d.
Select the appropriate option.
“Camera”
[Options]
“Go to Video Camera”
“Camera”
[Options]
“Go to Photo Camera”
Selecting the Picture or Video Quality
Select the appropriate option.
“Camera”
[Options]
“Picture Quality”
“Camera”
[Options]
“Video Quality”
1. Select the desired picture or video quality.
: Super Fine
:Fine
: Normal
Note
The better quality you select, the larger file size is
needed.
Selecting the Storage Memory
Select the appropriate option.
“Camera”
[Options]
“Settings”
“Save New
Pictures”
“Camera”
[Options]
“Settings”
“Save New
Videos”
1. Select the desired location from “To Handset
Memory”, “To Memory Card” or “Choose bef.
Saving”.
Note
If you select “Choose bef. Saving”, select the desired
location every time you save.
Camera 47
Auto Save
You can set the phone to save pictures and video clips
automatically.
“Camera”
[Options]
“Settings
“Auto Save”
1. Select “On” or “Off”.
Selecting the Anti-flicker Mode
“Camera”
[Options]
“Settings”
“Anti-
flicker”
1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”.
Note
Vertical stripes may occur on the picture due to the
light source. Change the anti-flicker mode to rectify.
Using the Help Function
“Camera”
[Options]
“Help”
Common Shortcut Keys
If multiple options exist, they switch each time you
press each following key.
Note
The “Switches the display modes” option is available
in “Preview” before you save a video clip. See
“Recording Video Clips” on page 45.
Photo Camera Video Camera
GZoom Max/Min
HExposure
I
JSave New Pictures Save New Videos
KPicture Size Picture Size
LMicrophone On/Off
MPicture Quality Video Quality
NSelf-timer On/Off
O
QSwitches Viewfinder
between with and
without indicators
Switches the display
modes in the Preview
screen
PSwitches between internal and external cameras
48 Camera
Functions in the Photo Camera Mode
Selecting the Picture Size
You can select the size of pictures. All taken pictures
are saved in the JPEG format.
“Camera”
[Options]
“Picture Size”
1. Select the desired size.
(External Camera) 960 × 1280 dots/
768 × 1024 dots/480 × 640 dots/
240 × 320 dots/120 × 160 dots
(Internal Camera) 120 × 160 dots
Continuous Shoot
There are various modes for taking continuous shots.
“Camera”
[Options]
“Modes”
“Continuous
Shoot”
1. Select the desired mode.
The following continuous shoot modes are
available:
“Off”: The continuous shoots are
cancelled.
“4 Pictures”/“9 Pictures” ( / ):
Takes 4 or 9 pictures
continuously.
After selecting this mode,
select from “Fast”,
“Normal” or “Manual”.
“Overlapped” ( ): Overlaps continuous
pictures into one picture and
makes an afterimage.
After selecting this mode,
select “Fast” or “Normal”.
Note
When you select “Manual” to take continuous
pictures, press B manually at the desired speed.
When the Timer and Continuous Shoot functions are
simultaneously set, ” (for “4 Pictures”, for
example) is displayed instead.
You cannot use the Continuous Shoot function for
picture sizes larger than 480
×
640 dots. “9
Pictures” and “Overlapped” are not available for
picture sizes larger than 240
×
320 dots.
Camera 49
Selecting a Frame
You can select the frame from preset patterns or My
Pictures.
“Camera”
[Options]
“Modes”
“Add Frame”
1. Select “Preset Frames” or “My Pictures”.
2. Select the desired frame.
The selected frame is confirmed on the display.
3. Press B.
Note
Images larger than 240 dots [W]
×
320 dots [H]
cannot be used.
Using the Full Screen
You can display the preview on the full screen without
the soft key area and indicator area.
“Camera”
[Options]
“Settings”
1. Select “Full Viewfinder”.
To return to the normal viewfinder, select “Normal
Viewfinder”.
Selecting the Shutter Sound
“Camera”
[Options]
“Settings
“Shutter
Sound”
1. Select the desired shutter sound from 3 preset
patterns.
To playback the shutter sound, press [Play] in step
1.
Note
Continuous Shoot uses the specialised shutter sound
that cannot be changed using the above settings.
The shutter sound remains active even when
“General Volume” (p. 110) is set to “Silent” to
prevent unauthorised use.
50 Camera
Functions in the Video Camera Mode
Selecting the Recording Time
“Camera”
[Options]
“Record Time”
1. Select “For Message” or “Extended Video”.
For Message ( ): Limits the size to send a
message depending on
service providers.
Extended Video ( ):Less than 30 minutes
(depending on the
memory).
Note
If you select “For Message” for the recording time,
the file size is limited depending on the service
provider. Therefore, the quality is also limited for the
setting.
“Save and Send” is not displayed after recording in
the Extended Video mode.
Selecting the Picture Size
You can select the size of pictures.
“Camera”
[Options]
“Picture Size”
1. Select “Large(QCIF)” or “Small(SubQCIF)”.
Recording Video Clips with the Sound
To record a video clip with the sound, the microphone
needs to be activated.
“Camera”
[Options]
“Settings”
“Microphone”
1. Select “On” or “Off”.
Note
The microphone is already turned on in the default
setting. Select “Off” to record a video clip without
the sound.
The file size of a video clip can be reduced if the
sound is not recorded.
Video Encoding
“Camera”
[Options]
“Settings”
“Video
Encode”
1. Select the appropriate format.
Messaging 51
Messaging
Your phone allows you to send and receive text,
multimedia and Email. It is compatible with most POP3
Email providers.
SMS
SMS allows you to send text messages up to
765 characters long. If you send a message of more than
160 characters, it is split into several segments.
MMS
MMS allows you to send and receive multimedia
messages of up to 300 KB with images, sound, or video
clips attached.
Email
Email allows you to send messages of up to 300 KB.
Note
Some MMS functions may not always be available
depending on your network. Contact your service
provider for more information.
Maximum message size varies depending on the
restrictions set by the service provider.
1. Recipient field
2. Message field
3. Send
4. Picture, Sound, Video, Others
(M 5)
3
1
4
2
52 Messaging
Creating a New Message
(SMS/MMS)
A
“Create Message”
“Message”
(Email)
A
“Create Message”
“Email”
1. Select the address field.
2. Select the desired method to enter the address.
3. For MMS, enter or select the Email address or
phone number from the Contacts List. For SMS,
enter or select a phone number. For Email, enter or
select an Email address.
To add multiple Email addresses or phone
numbers, highlight the recipient field, press
[Options], select “Edit Recipients”, then select
“Add Contact”. Enter or select the Email address
or phone number from the existing Contacts List.
To change the recipient types, press [Options],
select “Edit Recipients” and highlight the desired
recipient. Press [Options] and select “Change to
To”, “Change to Cc” or “Change to Bcc”.
To add a subject, press [Options] and select “Add
Subject”.
4. Place the cursor in the message field.
5. Enter the message.
6. Highlight “Send” in the lower left of the screen.
Press B and select “Send Message”.
After the message is sent, the message is moved to
the Sent box.
Tip
To send the same message to a group of recipients,
select “Select Group” in step 2, then select the
desired group name. For details on creating a
mailing list, see “Creating a New Mailing List” on
page 39.
(M 5-1)
Messaging 53
To Add a Slide Show
1. In step 4 in “Creating a New Message” on page 52,
press [Options] and select “Add Slide”.
If you wish to add more slides, select “Add Slide
After” or “Add Slide Before”.
2. Enter the message.
If you wish to set the duration of each slide,
highlight the space between the slides. Press
[Options] and select “Slide Duration”, then select
the desired duration.
Tip
You can create messages up to 300 KB. Each slide
can contain one picture and/or one sound file or
video clip.
To Attach My Items Data
1. In step 6 in “Creating a New Message” on page 52,
highlight the “Picture”, “Sound” or “Video
indicator in the lower centre of the screen, and then
press B.
2. Select “Saved Pictures”, “Saved Sounds” or “Saved
Videos”.
3. Select the desired file.
If you wish to take new pictures, record sounds or
video clips, select “Take Picture”, “Record Voice”
or “Record Video”.
When attaching JPEG files, select the appropriate
resize option, as the maximum message size for
sending varies depending on the service provider.
To Remove or Replace Attachments
1. In step 6 in “Creating a New Message” on page 52,
press [Options] and select the corresponding
remove option for each attachment.
54 Messaging
To Attach a Contacts List Entry
1. In step 6 in “Creating a New Message” on page 52,
highlight the “Others” indicator in the lower right of
the screen. Press B and select “Attach Contact”.
2. Select the desired entry.
If you wish to select your own Contacts List entry,
select “My Contact Details”.
To Attach a Schedule Entry
1. In step 6 in “Creating a New Message” on page 52,
highlight the “Others” indicator in the lower right of
the screen. Press B and select “Attach
Appointment”.
2. Select the desired day including a schedule entry
you wish to add.
3. Select the desired schedule entry.
Using the Sending Options
You can use the message sending options for each type
of message.
1. Highlight “Send” in the lower left of the screen,
then press B and select “Messaging Settings”.
“Read Report” (“On”, “Off”) (MMS): Confirms
whether or not a report is sent notifying the
sender that the message has been read.
“Delivery Report” (“On”, “Off”) (SMS/MMS):
Enables or disables Delivery Report when the
message is successfully sent to the recipient.
“Expiry Time” (“Maximum”, “30 minutes”, “1
hour”, “6 hours”, “1 day”, “1 week”) (SMS/
MMS): Sets Expiry Time for a message to be
saved in the server.
“Priority” (“High”, “Normal”, “Low”):
Prioritises composed messages.
“Delivery Time” (“No delay”, “30 minutes”, “1
hour”, “6 hours”, “1 day”, “1 week”) (SMS/
MMS): Sets the time the message is delivered
after the Send key is pressed.
Messaging 55
2. Highlight “Send” in the lower left of the screen.
Press B and select “Send Message”.
After the message is sent, the message is moved to
the Sent box.
Note
The current message size displayed while you are
creating the message is an approximation.
If a message cannot be sent for some reason, the
message stays in the Outbox and the “ is
displayed in standby.
Tip
To save the message without sending, press
[Options] and select “Save to Drafts” in step 4 in
“Creating a New Message” on page 52.
You can send the following items attached to
multimedia messages. Details are given in the
following sections.
My Items data
Contacts List entry
Schedule entry created by Calendar, etc.
You can use the template option to help you compose
messages. For details on using this option, see
“Using Templates” on page 32.
Sending a Message in the Drafts Box
A
“Drafts”
1. Select the desired tab, SMS/MMS or Email.
2. Press [Options] and select “Edit & Send”.
3. Modify the message, if necessary.
4. Highlight “Send” in the lower left of the screen.
Press B and select “Send Message”.
Sending a Voice Clip Message or Video Clip
Message
You can record a new voice or video clip when creating
a new message.
Select the appropriate option.
A
“Create Message”
“Voice Message”
A
“Create Message”
“Video Message”
1. Press B to start recording.
2. Press B to stop recording.
3. Select “Accept” to attach to the new message.
The file is saved in the corresponding folder in My
Items.
For further procedures, see “Creating a New
Message” on page 52.
(M 5-3)
(M 5-1-2) (M 5-1-3)
56 Messaging
Reading a Message
Messages you receive are saved in the Inbox.
A
“Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Select the message you wish to view.
Storing the Phone Number of a Sender in the
Contacts List
A
“Inbox”
1. Highlight the message from which you wish to store
the phone number or Email address.
2. Press [Options] and select “Save Address”.
The new Contacts List entry screen including the
phone number is displayed. For details on creating
a new Contacts List entry, see “Add New Contact”
on page 35.
Calling the Phone Number of a Sender
Embedded in the Message
A
“Inbox”
1. Highlight the message containing the phone number
you wish to dial.
2. Press [Options] and select “Call”.
Downloading a Single MMS
A
“Inbox”
1. Highlight the message alert ( ) you wish to
download.
2. Press [Options] and select “Download”.
Tip
You can download multiple messages at the same
time. See “Downloading Multiple MMS”.
Downloading Multiple MMS
A
“Inbox”
1. Press [Options] and select “Advanced”.
2. Select “Multiple Select”.
3. Select the desired message alerts, press [Options]
and select “Select” or “Select All”.
4. Press [Options] and select “Download”.
The selected messages are downloaded at the same
time.
Messaging 57
Replying to a Message or to All Addresses
A
“Inbox”
1. Highlight the message the sender of which you wish
to reply to.
2. Press [Options] and select “Reply” or “Reply All”.
3. Select “Reply” or “Reply with History”.
4. Enter the message.
5. Highlight “Send” in the lower left of the screen.
Press B and select “Send Message”.
Forwarding a Message
A
“Inbox”
1. Highlight the message you wish to forward.
2. Press [Options] and select “Forward”.
3. Perform steps 1 to 5 in “Creating a New Message
on page 52.
Sorting the Messages in the List
A
“Inbox”
1. Press [Options] and select “Advanced”.
2. Select “Sort”.
3. Select the desired sort option.
Locking or Unlocking the Messages
A
“Inbox”
1. Highlight the message you wish to lock or unlock.
2. Press [Options] and select “Advanced”.
3. Select “Lock” or “Unlock”.
58 Messaging
Sending a Picture File with Postcard
Your phone allows you to send multimedia messages to
a Vodafone specific Postcard service centre that prints
the picture and mails it to the recipient’s home address
specified in the MMS message. (Your phone is
provided with the address of a Vodafone specific
Postcard service centre, and its address cannot be
changed.)
Note
This service is not available with some service
providers. Please contact your service provider for
more information.
To Create a New Postcard
See the note on page 161 for menu indications.
A
“Create Message”
“Postcard”
“Saved Pictures
1. Select a picture you wish to send.
If you wish to take new pictures, select “Take
Picture”.
If the file size of selected JPEG format pictures or
taken pictures is too large to send, select the
appropriate resize option.
2. Enter your message.
You can enter messages of up to 200 bytes.
3. Enter or select the recipient.
See the note below for details.
“Name” (mandatory):
Name of the recipient for a postcard up to 50
bytes
“Additional Information” (optional):
Additional information of the recipient up to 50
bytes
“Street & Number” (mandatory):
Street and number up to 50 bytes
“City” (mandatory):
City up to 50 bytes
“Postal Code” (optional):
Postal code up to 20 bytes
“State/Province” (optional):
State, province, and region up to 50 bytes
“Country” (optional):
Country up to 20 bytes
4. Press [Options] and select “Send Postcard”.
(M 5-1-4)
Messaging 59
Note
The items “Name”, “Street & Number” and “City”
are necessary to complete sending Postcards.
The items displayed differ according to the service.
Please contact your service provider for more
information. The item “Country” may not be
displayed, so you cannot send Postcards overseas
from your phone.
Asterisks entered in the message or the address
become invalid when the message is sent, and spaces
cannot be entered in the Postal Code.
Files in Animation GIF format cannot be used for the
Postcard service.
The picture quality of Postcards varies depending on
the picture size.
Vodafone Messenger
With Vodafone Messenger you can stay in touch and
have fun with friends through instant text messaging.
You will know when your friends are available to chat
and that they immediately receive your instant
messages. When you first start using Vodafone
Messenger, all you need to know is your friend’s
mobile number or messenger ID to build your
Vodafone Messenger contact list.
Note
This service is split into two types, an Instant
messenger version and a Web version. The Instant
messenger version is described here. If your phone
does not access the Instant messenger version as
described here, you will connect to the Web version.
To find out which service you are using, please
contact your service provider.
(M 5-6)
60 Messaging
1st Sign in
A
“Vodafone Messenger”
1. Enter your screen name and press B.
Your phone is connected to Instant messenger
server.
2. Select one of the following methods to add
members to your contact list.
“Enter Phone Number”:
Enters the contact’s phone numbers.
“Enter Messenger ID”:
Enters the contact’s messenger ID.
Enter from your Contacts List:
Selects members from your Contacts List.
3. Enter the display name and press B.
Tip
You can change the screen name and display name at
any time.
If necessary items for Messenger Settings are not set,
the settings screen for the settings is displayed
(p. 67).
Starting a Conversation
A
“Vodafone Messenger”
1. Display the Online Contacts tab or the Group
Conversations tab by c/d.
2. Select the display name or the group name you wish
to send the message to.
The conversation dialogue opens.
3. Enter the message in the lower window and press B.
When the message is sent, the message moves to the
upper window.
4. When you receive a message, it is displayed in the
upper window.
5. To continue the conversation, repeat steps 3 and 4.
Note
You can enter up to 160 characters in each message
that is sent.
You can send messages even if the recipient is not
connected.
Messaging 61
Tip
You can move the cursor by a/b.
When the cursor is at the top of the lower window, a
moves control to the upper window then a/ b scrolls
the text in the upper window. To return to the lower
window, press [Back].
The number of lines in the upper and lower windows
changes to suit the circumstances.
Adding a New Contact
A
“Vodafone Messenger”
1. Display the Registered Contacts tab or the Online
Contacts tab by c/d.
2. Press [Options] and select “Add New Contact”.
3. Enter the new Contact List member by steps 2 and
3 in “1st Sign in” on page 60.
Adding a Group of Contacts
A
“Vodafone Messenger”
1. Display the Group Conversations tab by c/d.
2. Press [Options] and select “Add New Group”.
3. Enter the group name and press B.
The Online Contacts list opens.
4. Highlight each member you wish to add to the
group and press B to check.
To uncheck, press B once.
5. Press [Save].
Adding Members to a Group of Contacts
A
“Vodafone Messenger”
1. Display the Group Conversations tab by c/d.
2. Highlight the group you wish to add the members
to.
3. Press [Options] and select “Invite Contacts”.
The Online Contacts list opens.
4. Select the members by steps 4 and 5 in “Adding a
Group of Contacts”.
62 Messaging
Reading a Message
A
“Vodafone Messenger”
1. Display the Conversations tab by c/d.
2. Select the desired message you wish to read.
Tip
You can continue a conversation after you have
received a message by entering a message in the
lower window.
Saving a Conversation
1. Display the Conversations tab by c/d.
2. Highlight the conversation you wish to save.
3. Press [Options] and select “Save Conversation”.
Note
You can save up to 3900 bytes in a single
conservation. When this limit is exceeded, messages
are automatically deleted starting from the oldest
message.
You can save up to ten conversations. When this limit
is exceeded, you will be asked to delete old
conversations starting from the oldest message.
You can view saved conversations as follows:
Reading a Saved Conversation
A
“Vodafone Messenger”
1. Display the Conversations tab by c/d.
2. Press [Options] and select “Saved Conversations”.
3. Select the conversation you wish to read.
Watchers List
The watchers list allows you to see who is viewing your
status.
Messaging 63
Adding Contacts from the Watchers List
A
“Vodafone Messenger”
1. Press [Options] and select “Settings”.
2. Select “Watchers List”.
The Watchers List opens.
3. Press [Options] and select “Add to Contacts”.
Tip
To block a member from viewing your status,
highlight the member you wish to block, press
[Options] and select “Block User”.
Client Settings
A
“Vodafone Messenger”
1. Press [Options] and select “Settings”.
2. Select one of the following items.
“My Status”: Changes your connection
status to “Online” or
“Busy”.
“Screen Name”: Changes your screen
name.
“Automatic Sign In”: Sets whether or not to sign
in when you turn your
phone on.
“Block List”: Views and removes
contacts from the Block
List.
Sign Out
You can log out using any tab.
1. Press [Options] and select “Sign Out”.
64 Messaging
Messaging Settings
General Settings
A
“Messaging Settings”
“General Settings”
1. Select the item you wish to set up.
“Home Download”:
Controls the message download timing inside
your network area.
“Always Download”: Downloads messages
immediately from the
server.
“Always Defer”: Defers message download.
“Roaming Download”:
Controls the message download timing when
roaming outside of your network.
“Always Download”: Downloads messages
immediately from the
server.
“Always Defer”: Defers message download.
“Delivery Report”:
Enables or disables Delivery Report request.
“Read Report”:
Enables or disables Read Report request.
“Expiry Time”:
This indicates the number of days and hours for
which a message you send may remain
undelivered to the message recipient. During this
period, the message service centre will
continually try to deliver the message to the
recipient.
“Edit Signature”:
Opens the screen to enter the signature.
“Auto Delete”:
Deletes the oldest message automatically, when
the Inbox, Sent or Both (Inbox and Sent) is full.
“Automatic Resend”:
Tries to resend the failed SMS/MMS message up
to two times (“On” or “Off” selection).
“Message List View”:
Switches the mailbox listing between “One-line
View” and “Two-line View”.
(M 5-9)
(M 5-9-1)
Messaging 65
SMS Settings
A
“Messaging Settings”
“SMS Settings”
1. Select the item you wish to set up.
“Message Centre”:
Enter the message centre number.
If you wish to enter a country code for a message
to an international number, press and hold Q
until a + sign is displayed.
“Message Format”:
Select the message format to be used when
creating a new message.
•“Reply Path:
Accepts or rejects the same reply path with the
send path when receiving the reply message for
your message.
• “Optimisation”:
When set “On” (default), double-byte characters
such as European characters with an accent are
converted into single-byte characters and sent.
When “Off”, double-byte characters are sent as
displayed.
Please note that you may be charged double for
double-byte characters sent in an SMS when
Optimisation is set “Off”.
(M 5-9-2)
66 Messaging
MMS Settings
A
“Messaging Settings”
“MMS Settings”
1. Select the item you wish to set up.
“MMS Accounts”:
Select the desired account or select “Create New”
to enter the following settings.
“Profile Name”: MMS profile name
(Unique name)
“Proxy”: Proxy setting for MMS
“Relay Server URL”: MMS relay server
“Delivery Report Allow”:
Confirms whether or not a report is sent notifying
the sender when you receive a message.
“Read Report Allow”:
Enables or disables Read Report Allow when the
recipient is required to inform the sender that the
message has been read.
“Slide Duration”:
Sets the duration of the slide.
“Max Message Size”:
Sets the maximum message size for sending and
disables sending MMS messages exceeding that
size.
“Creation Mode”:
When set to “Free”, you can attach files of any
format to the mail. When set to “Restricted”, only
certain formats and message sizes can be
attached. The “Restricted” setting has priority
over “Max Message Size”.
(M 5-9-3)
Messaging 67
Email Settings
A
“Messaging Settings”
“Email Settings”
1. Select the item you wish to set up.
“Email Accounts”:
Select the desired account or select “Create New”
to enter the following settings.
“Account Name”: Email account name
(Unique name)
“POP3 Server”: Server name, user ID,
password and port number
for POP3 server
“SMTP Server”: Server name, user ID,
password, port number for
SMTP server and SMTP
Authentication
“Access Point”: Access point for Email
“Email Address”: Email address
“Download Interval”:
Sets the download interval.
“Max Message Size”:
Sets the maximum message size for sending and
disables sending Email messages exceeding that
size.
Messenger Settings
With service providers not offering the Instant
Messenger function, the Messenger Settings menu is
not displayed.
A
“Messaging Settings”
“Messenger Settings”
1. Select “Create New” to enter the following setting.
“Profile Name”: Messenger profile name
(Unique name)
“Proxy”: Proxy setting for Messenger
“URL”: Messenger relay server
“Messenger ID”: Your ID for Messenger
“Password”: Password for Messenger
Note
In normal operations, you do not need to change the
settings.
Messenger settings have already been entered in
your phone depending on your service provider. You
may have restrictions on viewing, deleting, copying
or modifying the settings. Contact your service
provider for details.
(M 5-9-4) (M 5-9-5)
68 Vodafone live!
Vodafone live!
Your phone is already configured to access Vodafone
live! and the mobile internet*.
Vodafone live! is a new mobile internet portal which is
your gateway to a new world of information, games,
music and services.
Because your phone uses 3G (UMTS), it has a system
that is much faster than previous ways of getting mobile
information. Also, the connection is ‘always on’ which
means there is no need to wait for dialling up. You only
have to pay for the data you send or receive, not how
long you’re connected.
* If you have problems getting connected, please
phone Vodafone Customer Support.
Your phone contains a WAP browser used for surfing
on the Mobile Internet, where you can get a lot of useful
information. Normally, pages are designed for a mobile
phone.
Main Menu
“Vodafone live!”
“Vodafone live!”
The Vodafone live! service page is displayed.
“Vodafone live!”
“Enter URL”
The URL entry screen is displayed, allowing you to
jump to a site.
“Vodafone live!”
“Bookmarks”
See page 69.
“Vodafone live!”
“Alert Inbox”
WAP Push alerts are displayed.
“Vodafone live!”
“Saved Page”
The saved screenshots are displayed.
“Vodafone live!”
“Access History”
The history of pages you have recently browsed is
displayed.
“Vodafone live!”
“Browser Settings”
See page 70.
(M 2)
Vodafone live! 69
Navigating a WAP Page
a b c d:
Move the highlights around in the screen.
B: Executes the option displayed in the lower
centre of the screen.
A: Launches the browser option menu.
C: Selects an action displayed in the lower
right of the screen.
Used to access “Vodafone live!” by
opening the browser.
F(short press):
Exits the browser.
(press and hold):
Turns off the phone.
Editing Bookmarks
“Vodafone live!”
“Bookmarks”
1. Select the desired URL, and press [Options].
You can edit the list of Bookmarks by the following
options:
“Open”: Selects a bookmark.
“Details”: Displays detailed
information of the WAP
page.
“Send Page”: Sends the URL address to
recipients.
“New”: Creates new folders or
bookmarks.
“Rename”: Renames bookmarks.
“Edit URL”: Edits URL address of the
bookmark.
“Move”: Moves bookmarks to
another location.
“Delete”: Deletes bookmarks.
“Delete All”: Deletes all bookmarks.
(M 2-3)
70 Vodafone live!
Browser Settings
“Vodafone live!”
“Browser Settings”
“Font Size”: Sets the size of the browsing
font.
“Scroll Step”: Sets the speed of scrolling.
“Send Referrer”: Enables or disables the
notification of the referrer.
“Cookies”: Adjusts the setting of
cookies.
“Downloads”: Categorises downloading
data from the images/
sounds/objects.
“Security”: Adjusts the security prompt
level.
“WAP Push”: Sets whether you need
confirmation for push
message.
“Download to”: Sets the download location.
The Browser Options
You can use various options of the WAP browser.
C
[Options]
“Select”: Selects a WAP page.
“Home”: Goes to the homepage.
“Bookmarks”: See page 69.
“Mark Page”: Marks the selected WAP
page.
“Save This Link”: Downloads the linked WAP
page data.
“Save Items”: Saves items from WAP
pages.
“Enter URL”: Goes to the WAP page that
you enter the URL address
of.
“Access History”: Shows the history where
you have browsed.
“Forward”: Goes to the next page of the
pages displayed.
“Reload Page”: Reloads the WAP page
again to get new
information.
“Advanced”: Displays the advanced
menus.
“Exit”: Exits the browser.
(M 2-7)
Vodafone live! 71
The Advanced Options
C
[Options]
“Advanced”
“Saved Page”: The saved screenshots are
displayed.
“Save This Page”: Saves the WAP page as a
local file.
“Send Page”: Sends the WAP page data.
“Details”: Shows detailed information
of the WAP page.
“Browser Data”: Edits the browser data. You
can clear the cache/cookies/
history.
“Search This Page”: Searches for specific words
in the WAP page.
“Copy Text”: Copies the text on the WAP
page.
“Browser Settings”: Displays the Settings
menus.
“Restart Browser”: Restarts the browser.
“About”: Displays the browser
information.
72 Music
Music
Music Player
Music Player supports MP3, MPEG-4 and 3GPP
format sound files. While playing back sound files in
the background, you can use other menus.
Adding a New Playlist
You can create your own playlist, storing and managing
your favourite tracks and the order of tracks.
“Music”
“My Music”
“Playlists”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
Note
To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
You can create up to 99 playlists.
Playing Back Sound Files
“Music”
“My Music”
1. Select the item you wish to play back.
“All Music”:
All sound files are displayed.
“Artists”:
The names of all artists are displayed.
When an artist is selected, all of his or her albums
are displayed.
When an album is selected, all of the sound files
in the selected album are displayed.
“Albums”:
The names of all albums are displayed.
When an album is selected, all of the sound files
in the selected album are displayed.
“Playlists”:
All playlists are displayed.
When any playlist is selected, all of the sound
files in the selected playlist are displayed.
2. Select the desired sound file.
To pause playback, press B.
Note
Select “My Music” to update the list of available
music tracks.
(M 3)
(M 3-2)
Music 73
You are asked whether or not to play sounds when the
Silent mode is activated.
To play the last played file, select “Last Played
Music”. “Currently Playing” is displayed when a file
is being played back.
When you receive a call, playback of the current file
is paused, and you can receive the call. After the call
ends, the paused playback resumes automatically in
the background.
Tip
You can return to the Main menu screen while
playing back the file in the background.
You can create your playlist by listing only the
desired files (p. 72).
Sound files in both the handset and the memory card
are displayed in a single view.
You can select the playback pattern in step 2. Press
[Options] and select “Playback Pattern”.
“Normal”: Plays back all files in the selected
folder once and stops playback.
“Repeat”: Continues playback of selected file
in the selected folder.
“Repeat All”: Plays back all files in the selected
folder.
“Random”: Plays back files in the selected folder
at random.
You can control the Music Player by using the
following keys:
a/b: Increases or decreases the volume.
b (press and hold): Mutes.
d: Jumps to the next file.
c: Returns to the start of the current file.
d (press and hold): Fast-forwards.
c (press and hold): Rewinds.
F: Plays back the file in the background.
74 Music
Sorting Files
“Music”
“My Music”
“All Music”
1. Press [Options] and select “Sort”.
2. Select “By Title”, “By Artist”, “By Album” or
“By Genre”.
Sort results are displayed.
Adding a File to the Playlist
You can add files to a playlist by doing the following.
“Music”
“My Music”
“All Music”
1. Highlight the file you wish to add to the playlist.
2. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on adding a
playlist, see “Adding a New Playlist” on page 72.
3. Select the desired folder.
The file highlighted in step 1 is saved.
To delete files from the playlist, highlight the file in
the playlist and press [Options]. Then select “Delete
from Playlist”.
Note
You can store up to 99 files in one playlist. However
the total number of files stored on your phone cannot
exceed 350 files.
Downloading Music Files
“Music”
“Browse Music Store”
The music file download site is displayed.
Note
This service is not available with some service
providers. Please contact your service provider for
more information.
Music Finder
You can connect to the Music Finder service.
“Music”
“Music Finder”
Note
This service is not available with some service
providers. Please contact your service provider for
more information.
(M 3-3)
(M 3-4)
My Items 75
My Items
My Items contains several types of picture, sound and
video clip data. Also included in My Items are
frequently used text message phrases and WAP sites
which you can use for downloading. You can also
transmit picture, sound and video clip data via
Bluetooth wireless technology to OBEX-enabled
phones.
Pictures
Pictures that are taken by a digital camera or images
that are downloaded from mobile Internet sites can be
managed. You can register pictures in the following
formats: JPEG, PNG, WBMP and GIF.
Viewing Pictures
“My Items”
“Pictures
1. Press d to display the list from the memory card
and c to return to the handset memory.
2. Select the file you wish to view.
The selected picture is displayed.
Using Images as Wallpaper
“My Items”
“Pictures”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
Saving an Image to Contacts List Entries
You can use this option only for pictures saved in the
handset memory.
“My Items”
“Pictures”
1. Highlight the file you wish to add to Contacts List.
2. Press [Options] and select “Add to Contact”.
To overwrite, select the data you wish to save.
To save as a new entry, select “As New Contact”.
For details on entering a name, see “Add New
Contact” on page 35.
(M 6)
(M 6-1)
76 My Items
Editing Pictures
“My Items”
“Pictures”
1. Highlight the file you wish to edit.
2. Press [Options] and select “Picture Editor”.
3. Select the desired option.
Note
“Picture Editor” may not be available depending on
the original picture and copyright issued.
Adjusting the Size
You can adjust the picture to an appropriate size
depending on the scene.
“My Items”
“Pictures”
1. Highlight the file you wish to adjust the size of.
2. Press [Options] and select “Resize”.
3. Select the desired option.
Note
“Resize” may not be available depending on the
original picture and copyright issued.
Tip
For other option menus, see “Common Option
Menus” on page 79.
Downloading Picture Files
“My Items”
“Pictures”
“More Pictures
The picture file download site is displayed.
Music & Ringtones
The downloaded sound files and the AMR data
recorded by Voice Recorder are managed in Music &
Ringtones. The default ringtones are not contained
within Music & Ringtones. Only the sound files that
can be played back on the phone are stored in Music &
Ringtones.
Playing Back Sound Files
“My Items”
“Music & Ringtones”
1. Press d to display the list from the memory card
and c to return to the handset memory.
2. Select the file you wish to play back.
To pause playback, press B.
To stop playback, press [Back].
Note
Playback may not be available for some sound files.
(M 6-2)
My Items 77
Using the Sound Files as a Ringtone
“My Items”
“Music & Ringtones”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as Ringtone”.
Tip
For other option menus, see “Common Option
Menus” on page 79.
Downloading Sound Files
“My Items”
“Music & Ringtones”
“More
Sounds”
The sound file download site is displayed.
Videos
Video clips that are recorded by a video camera or
downloaded from mobile Internet sites can be
managed.
Playing Back Video Clip Files
“My Items”
“Videos”
1. Press d to display the list from the memory card
and c to return to the handset memory.
2. Select the file you wish to play back.
To pause playback, press B.
To resume, press B again.
To stop playback, press [Back].
Using a Video Clip as a Ring Video
You can set your video clip to play back when the
phone rings.
“My Items”
“Videos”
1. Highlight the desired video clip.
2. Press [Options] and select “Set as Ring Video”.
Tip
For other option menus, see “Common Option
Menus” on page 79.
Downloading Video Clip Files
“My Items”
“Videos”
“More Videos”
The video clip file download site is displayed.
(M 6-4)
78 My Items
Themes
You can easily customise the display of 550SH, by
using the theme files.
The theme files that are downloaded from mobile
Internet sites can be managed.
Viewing Previews
“My Items”
“Themes”
1. Press d to display the list from the memory card
and c to return to the handset memory.
2. Highlight the theme file you wish to preview.
3. Press [Options] and select “Preview”.
The selected theme file is displayed.
Setting Theme
“My Items”
“Themes”
1. Select the desired theme file.
The selected theme file is set as the default theme.
Tip
Even after a theme is set, you can set a wallpaper
regardless of the set theme. In this case, the other
items follow the set theme.
For other option menus, see “Common Option
Menus” on page 79.
Note
If you set your original image as a wallpaper, the
screen asking you to choose “Use Current
Wallpaper” or “Use Theme Wallpaper” is displayed
after step 1.
Downloading Theme Files
“My Items”
“Themes”
“More Themes”
The theme file download site is displayed.
Other Documents
Some types of files are stored in the Other Documents
folder of the phone. You can edit and use these files as
My Items data.
Opening the Document File
“My Items”
“Other Documents”
1. Press d to display the list from the memory card
and c to return to the handset memory.
2. Select the desired file.
Tip
For other option menus, see “Common Option
Menus” on page 79.
(M 6-6)
(M 6-8)
My Items 79
Common Option Menus
Activating Files with Copyright Protection
(DRM)
Some pictures, sound files, video clips and theme files
have a digital copy protection program, which is called
DRM (Digital Rights Management). You need to
activate the digital licence permission to open the files.
Files protected with DRM are displayed with .
Select the appropriate option.
“My Items”
“Pictures
“My Items”
“Music & Ringtones”
“My Items”
“Videos”
“My Items”
“Themes”
“My Items”
“Other Documents”
1. Highlight the file you wish to activate.
2. Press [Options] and select “Activate”.
Note
Some pictures with DRM may not open even when an
attempt is made to activate it.
Sending My Items Data
Select the appropriate option.
For Files except Theme Files
“My Items”
“Pictures”
“My Items”
“Music & Ringtones”
“My Items”
“Videos”
“My Items”
“Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Send”.
3. Select “As Message” or “Via Bluetooth”.
80 My Items
For Theme Files
When sending the theme files, you can do it via
Bluetooth only.
“My Items”
“Themes”
1. Highlight the desired file.
2. Press [Options] and select “Send via Bluetooth”.
Tip
For details on creating a message, see “Creating a
New Message” on page 52.
For details on Bluetooth settings, see “Bluetooth” on
page 122.
Note
Pictures/Sounds/Video clips protected by copyright
cannot be sent attached to a message, with the
exception of Separate Delivery files.
When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
When you send a picture file, select “As Postcard” in
step 3. The Postcard service is not available with
some providers. Contact your service provider for
more information.
Receiving My Items Data
When the phone receives My Items data, a confirmation
message is displayed in standby.
1. Press [Yes].
The received data is saved in the corresponding My
Items folder.
Tip
For details on Bluetooth wireless settings, see
“Connectivity” on page 122.
Using My Items Data
You can copy, move, sort, rename, and delete the saved
My Items data.
Select the appropriate option.
“My Items”
“Pictures”
“My Items”
“Music & Ringtones”
“My Items”
“Videos”
“My Items”
“Themes”
“My Items”
“Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Advanced”.
My Items 81
3. Select the desired option.
“Move”: Moves files to another folder.
Select the desired folder to move
to.
“Copy”: Copies files. Select the desired
folder to copy to.
“Create Folder”: Creates a new folder.
“Multiple Select”: Selects multiple files.
“Sort”: Sorts the file. Select the desired
files to sort.
Note
When you select “Themes”, you can select “Move”,
“Copy” and “Sort” only in step 3.
To Rename the File
Select the appropriate option.
“My Items”
“Pictures
“My Items”
“Music & Ringtones”
“My Items”
“Videos”
“My Items”
“Themes”
“My Items”
“Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Rename”.
To Delete the File
“My Items”
“Pictures”
“My Items”
“Music & Ringtones”
“My Items”
“Videos”
“My Items”
“Themes”
“My Items”
“Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Delete”.
To See the My Items Details
Select the appropriate option.
“My Items”
“Pictures”
“My Items”
“Music & Ringtones”
“My Items”
“Videos”
“My Items”
“Themes”
“My Items”
“Other Documents”
1. Highlight the file you wish to view the details of.
2. Press [Options] and select “Details”.
82 My Items
Uploading My Items Data
You can upload your picture, sound or video clip files
to the Media Album.
“My Items”
“Pictures”
“My Items”
“Music & Ringtones”
“My Items”
“Videos”
1. Highlight the file you wish to upload.
2. Press [Options] and select “Send”.
3. Select “To Media Album”.
Note
This service is not available with some service
providers. Please contact your service provider for
more information.
Picture, sound and video clip files protected with a
copyright cannot be uploaded.
Selecting Multiple Files
You can select more than one item from My Items for
moving, copying and deleting.
Note
The following procedure applies when the entries
other than any theme file or “More Pictures”/
“More Sounds”/“More Videos” are highlighted.
Select the appropriate option.
“My Items”
“Pictures”
[Options]
“My Items”
“Music & Ringtones”
[Options]
“My Items”
“Videos”
[Options]
“My Items”
“Other Documents”
[Options]
1. Select “Advanced”.
2. Select “Multiple Select”.
3. Press B to check the desired file names.
4. Press [Options] and select the desired option.
Tip
To remove the check, select the file again or select
“Unselect” in step 4.
If you wish to select all files, select “Select All” in
step 4. To unselect all, select “Unselect All”.
My Items 83
Games & Applications
For details on Vodafone specific applications, see
“Games & Applications” on page 84.
Text Templates
You can register up to 50 text templates for use in text
messages and multimedia messages. A maximum of
256 characters can be used for a single text template.
Adding Phrases to Text Templates
“My Items”
“Text Templates”
“Add New
Template”
1. Enter the text and press B.
Editing Text Templates
“My Items”
“Text Templates”
1. Highlight the text template you wish to edit.
2. Press [Options] and select “Edit”.
To view the text template, press [Options] and
select “View”.
To delete the text template, press [Options] and
select “Delete”.
3. Modify the text and press B.
Sending Text Templates
“My Items”
“Text Templates”
1. Highlight the text template you wish to send.
2. Press [Options] and select “Send Template”.
Memory Status
This function helps you to check the memory status of
the handset memory or memory card. Memory status
covers the following.
Handset Memory: Applications, Pictures, Videos,
Sounds, Themes, Others, Total
and Free
Memory Card: Pictures, Videos, Sounds,
Themes, Others, Total and Free
“My Items”
“Memory Status”
1. Select “Handset Memory” or “Memory Card”.
(M 6-3)
(M 6-5)
(M 6-7) (M 6-9)
84 Entertainment
Entertainment
Games & Applications
Using Applications
Various kinds of Vodafone specific applications can be
used on this phone. To use applications, download the
applications via the mobile Internet. Some applications
offer the ability to connect to a network either within a
game or a network-based application.
Note
Applications may be both localised (no connectivity)
and network-based (using the mobile Internet to
update information/play games). The network may
charge you more for using network-based
applications. Please contact your service provider
for more information.
Downloading Applications
“Entertainment”
“Games & Applications”
“Games
“More Games”
“Entertainment”
“Games & Applications”
“Applications”
“More Applications”
1. Select the desired application.
Before downloading the application you are asked
to confirm what you are about to receive. After
checking the information on the confirmation
screen, the application can be downloaded.
2. Press B to start downloading.
3. Press B when finished.
Note
User authentication may be required before
downloading the application on some information
screens.
(M 1)
(M 1-1)
Entertainment 85
Executing Applications
“Entertainment”
“Games & Applications
“Games” or “Applications”
1. Select the title of the application you wish to
execute.
The selected application is executed. When using
network connection type applications, connection
to the network can be selected.
2. To end the application, press F and select “End”.
Setting as a Screensaver for the Display
“Entertainment”
“Games & Applications
“Games” or “Applications”
1. Highlight the file you wish to use as a screensaver.
2. Press [Options] and select “Set as Screensaver”.
Setting Permission
You can set permission for selected Java™
applications.
“Entertainment”
“Games & Applications
“Games” or “Applications”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Permission”.
3. Select one of the following options:
“Phone Call”: Sets permission to make voice
calls.
“Network Access”: Sets permission to access the
network.
“Messaging”: Sets permission to perform
MMS and SMS messaging.
“Autorun”: Sets permission to perform the
Autorun function.
“Local Connection”: Sets permission to connect to
local devices.
“Read User Data”: Sets permission to read user
data, such as Contacts List
entries, mailbox (Inbox) and
My Items data.
“Write User Data”: Sets permission to write
entries in your phone, such as
Contacts List entries, mailbox
(Inbox) and My Items data.
“Use Multimedia”: Sets permission to use the
multimedia recording.
86 Entertainment
4. Select one of the following options:
“Session”: The confirmation message is
not displayed until you exit
the application, while
execution of the API of the
specified function group is
authorised.
“Ask Once”: The confirmation message is
displayed every time the API
of the specified function
group is executed.
“Blanket”: The confirmation message is
not displayed until the
application is deleted or you
change the settings, while
execution of the API of the
specified function group is
authorised.
“No”: Execution of the API of the
specified function group is not
authorised.
Note
To clear all the permission settings, select “Reset” in
step 3.
All permissions are not available for all Java
applications.
Viewing Application Information
You can check the information of Java™ applications.
“Entertainment”
“Games & Applications”
“Games” or “Applications”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Information”.
Moving or Deleting an Application
You can move an application between Games folders
and Application folders, and also delete applications in
folders.
“Entertainment”
“Games & Applications”
“Games” or “Applications”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Move” or “Delete”.
Entertainment 87
Settings
Application Volume
You can set the volume of the application such as the
sound effect to one of the five levels or silent. When the
profile is set to “Silent”, the “General Volume” setting
(p. 110) has priority.
“Entertainment”
“Games & Applications
“Settings”
“Application Volume”
1. Press a (or d) to increase the volume or press b
(or c) to decrease the volume and then press B.
Backlight
“Entertainment”
“Games & Applications
“Settings”
“Backlight
“Switch On/Off”
1. Select from “Always On”, “Always Off” or
“Normal Settings”.
“Always On”: Lit while the application is
operated.
“Always Off”: Unlit while the application is
operated even if a key is
pressed.
“Normal Settings”: Works with the main
backlight setting (p. 116).
To Set the Blinking Operation
This setting enables the backlight to be controlled by
the application. If set to “Off”, the backlight cannot be
turned on from the application.
“Entertainment”
“Games & Applications”
“Settings”
“Backlight”
“Blink”
1. Select “On” or “Off”.
Vibration
When the vibrator is set in the application, you can
choose whether the operation is enabled or disabled.
“Entertainment”
“Games & Applications”
“Settings”
“Vibration”
1. Select “On” or “Off”.
(M 1-1-3)
88 Entertainment
Calls & Alarms
You can set the priority of incoming calls and alarms
while an application is operating.
“Entertainment”
“Games & Applications”
“Settings”
“Calls & Alarms”
1. Select “Voice Call”, “Video Call”, “Incoming
Message” or “Alarm”.
2. Select the desired method.
“Call Priority”, “Message Priority” or “Alarm
Priority”:
The application is suspended automatically, and you
can receive a call or a message, or the alarm will
sound. After finishing the call or sending the
message, or when the alarm ends, the suspend
indicator ( ) is displayed letting you know there is
a suspended application.
“Call Notice”, “Message Notice” or “Alarm Notice”:
The marquee (character scrolls) is displayed on the
first line of the screen while the application
continues. If you press D, the application is
suspended, and you can receive a call. After finishing
the call or sending the message, the suspend indicator
( ) is displayed letting you know there is a
suspended application.
Screensavers
You can download screensaver applications for the
standby screen and set the time period for the
screensaver to activate.
“Entertainment”
“Games & Applications”
“Settings
“Screensavers”
“Switch On/Off
1. Select “On” or “Off”.
To Set the Activation Time
“Entertainment”
“Games & Applications”
“Settings
“Screensavers”
“Activation Time”
1. Enter the activation time in two digits using the
keypad.
To Set the Suspend Time
“Entertainment”
“Games & Applications”
“Settings
“Screensavers”
“Suspend Time”
1. Set the desired time period from “after 15 min.” to
“after 6 hours”.
Entertainment 89
Default Settings
“Entertainment”
“Games & Applications
“Settings”
“Set to Default”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 121.
Clearing All Memory
“Entertainment”
“Games & Applications
“Settings”
“Memory All Clear”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 121.
Java™ Information
“Entertainment”
“Games & Applications
“Java™ Information”
The information about the licences belonging to Java™
is displayed.
Mobile TV
You can connect to the Mobile TV service.
Note
This service is not available with some service
providers. Please contact your service provider for
more information.
Streaming
You can play back video clip files while downloading
them from the mobile network.
You can also register the address of the Web site as a
bookmark.
“Entertainment”
“Streaming”
1. Select “Last Played Streaming”, “Enter URL”,
“Favourites” or “Access Log”.
“Last Played Streaming”:
Shows the last streaming file.
“Enter URL”: Enter the desired address of the
Web site. The browser opens,
starts downloading and plays back.
“Favourites”: The address of the Web site is
registered.
“Access Log”: Shows the logs of the Web sites
you have accessed.
“Settings”: The backlight and display size
settings.
(M 1-1-4)
(M 1-2)
(M 1-3)
90 Entertainment
Videos
Playing Back Video Clip Files
“Entertainment”
“Videos”
“My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Select the desired file.
To pause playback, press B.
To stop playback, press [Back].
Tip
You can control the Video Player by using the
following keys:
a/b: Increases or decreases the volume.
b (press and hold): Mutes.
d: Jumps to the next file.
c: Returns to the top portion of the current file.
d (press and hold): Fast-forwards.
c (press and hold): Rewinds.
Searching a File to Be Played Back
“Entertainment”
“Videos”
“My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Press [Options] and select “Search”.
4. Enter the first few letters of the title.
Search results are displayed in alphabetical order
and the matching file is highlighted.
Adding a File to the Playlist
You can add files to a playlist like the following.
“Entertainment”
“Videos”
“My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Highlight the file you wish to add to the playlist.
4. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on creating a
playlist, see “Adding a New Playlist” on page 91.
5. Select the desired playlist.
The file highlighted in step 3 is saved.
To delete files from the playlist, highlight the file in
the playlist and press [Options]. Then select “Delete
from Playlist”.
(M 1-4)
(M 1-4-3)
Entertainment 91
Adding a New Playlist
You can create a playlist and register desired files in it.
“Entertainment”
“Videos”
“My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Press [Options] and select “Add New Playlist”.
3. Enter the desired playlist name.
4. Press B.
Note
To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
Settings
You can select a play mode for “Playback Pattern”,
“Backlight” and “Display Size” when playing back
video clip files.
“Entertainment”
“Videos”
“My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Select the file for which you wish to adjust the play
mode.
4. Press [Options] and select “Settings”.
5. Select from “Playback Pattern”, “Backlight” or
“Display Size”.
6. Select from the following:
“Playback Pattern
“Normal”: Plays back all files in the
selected folder once and
stops playback.
“Repeat”: Continues playback in the
selected folder.
“Repeat All”: Plays back all files in the
selected folder.
“Random”: Plays back files in the
selected folder at random.
• “Backlight”
“Always On”: Lit while the file is played
back.
“Always Off”: Unlit while the file is played
back even if a key is pressed.
“Normal Settings”: Works with the main
backlight setting (p. 116).
“Display Size”
“Original Size”: Displays the file in its
original size.
“Enlarge”: Displays the file in an
enlarged size.
“Full Screen”: Displays the file on the full
screen.
92 Entertainment
Downloading Video Clip Files
“Entertainment”
“Videos”
“Get New Videos”
The video clip file download site is displayed.
Playing Back the Video Clip Files
To Play Back the Last File
“Entertainment”
“Videos”
“Last Played Video”
(M 1-4-2)
(M 1-4-1)
Calendar 93
Calendar
Calendar allows you to easily schedule appointments or
events at any given date or time.
These entries can also be sent via Bluetooth wireless
technology to a PC to share the same schedules. When
you exchange entries with other devices, the date and
time displayed may be different to that of the original
data depending on the data format of the receiving
device.
Creating a New Entry
“Calendar”
1. Select the desired day to which you want to add an
event.
2. Select “Add New Entry”.
3. Enter the subject.
4. Select the desired category.
5. Enter the start date and time.
6. Select the duration.
When selecting “Other”, enter the desired end date
and time.
7. Select the reminder time.
When selecting “Other”, enter the desired reminder
date and time.
8. Press [Save].
Note
If the date and time settings have not been entered,
the date and time entry screen is displayed (p. 117).
The reminder will not sound when “General
Volume” (p. 110) is set to “Silent”.
(M 11)
94 Calendar
To Change the Type of the Reminder Tone or
Video
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Assign Tone” and then select “Preset
Sounds” or “My Sounds”, or select “Assign Video”.
4. Select the desired sound or video clip file.
For details on selecting a tone, see “Assigning a
Ringtone for an Incoming Call” on page 110.
To Change the Duration of the Reminder Tone or
Video
1. On the New Entry screen, select “Reminder”.
2. Select “Duration”.
3. Select the time period.
When you select “Other”, you can enter the desired
time in two digits using the keypad.
To Change the Repeat Option of the Reminder
1. On the New Entry screen, select “Repeat”.
2. Select the desired repeat option.
To Enter the Location
1. On the New Entry screen, select “Location”.
2. Enter the location for the schedule entry.
To Enter the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the schedule entry.
To Make the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to make the data secret or select “Off”
to leave it as it is.
Calendar 95
Viewing a Schedule Entry
“Calendar”
1. Select the day you wish to view.
2. Select the desired entry.
To Search by Date
1. In any view, press [Options] and select “Go to”.
2. Select “Today” to display today or “Enter Date” to
enter the desired date.
Tip
In the monthly or weekly view, you can control the
view by using the following:
Monthly view
P: Displays the previous month.
R: Displays the next month.
Q: Displays the weekly view.
K: Moves the cursor to today.
c/d: Moves the cursor to left (the previous day)
or to right (the next day).
a/b: Moves the cursor upward (last week) or
downward (next week).
Weekly view
P: Displays the previous week.
R: Displays the next week.
Q: Displays the monthly view.
K: Moves the cursor to today.
c/d: Moves the cursor to left (the previous day)
or to right (the next day).
a/b: Moves the weekly view up or down (the
previous hour or next hour).
Setting a Holiday
In the weekly or monthly view, you can highlight a date
or days of the week with seven colour options.
“Calendar”
For Date Colour
1. Highlight the day you wish to set.
2. Press [Options] and select “Set Holiday”.
3. Select “By Date” and then select the desired colour.
96 Calendar
For Days of the Week Colour
1. Press [Options] and select “Set Holiday”.
2. Select “By Week” and then select days of the week
you wish to colour.
3. Select the desired colour.
Tip
The selected date/days are also highlighted on the
calendar on the standby screen.
Note
If the same date is set with both a date colour and
a day of the week colour, the date is highlighted in the
date colour.
Up to 100 days can be set for the highlights.
Finding a Schedule Entry
“Calendar”
1. In any view, press [Options] and select “Find”.
2. Enter a few letters of the subject.
Search results are displayed in time order.
Editing a Schedule Entry
“Calendar”
1. Select the day you wish to edit.
2. Highlight the entry you wish to edit, press
[Options], then select “Edit”.
3. Select the desired item and modify the entry.
4. Press [Save].
Deleting Schedule Entries
1. In any view, press [Options] and select “Delete”.
2. Select the desired option.
“This Appointment” (daily view):
Deletes the selected entry.
“All This Day”: Deletes all entries for the
selected day.
“All This Week” (weekly view):
Deletes all entries for the
selected week.
“Up to Last Week” (weekly view):
Deletes all entries before the
selected week.
Calendar 97
“All This Month” (monthly view):
Deletes all entries for the
selected month.
“Up to Last Month” (monthly view):
Deletes all entries before the
selected month.
“All Appointments” (weekly and monthly view):
Deletes all entries in this
application.
Sending a Schedule Entry
“Calendar”
1. Select the day including schedule entries you wish
to send.
2. Highlight the entry you wish to send, press
[Options], then select “Send”.
3. Select “As Message” or “Via Bluetooth”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 122.
Note
When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
Receiving a Schedule Entry
When the phone receives a schedule entry,
a confirmation message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Calendar.
Press [No] to reject.
Tip
For details on entering Bluetooth wireless settings,
see “Connectivity” on page 122.
Viewing the Memory Status
1. In any view, press [Options] and select “Memory
Status”.
98 Organiser & Tools
Organiser & Tools
Alarms
Setting the Alarms
The alarm function allows you to be alerted at a
specified time.
Note that you need to set the current date and time
before setting the alarm function if it has not been done
already.
“Organiser & Tools”
“Alarms”
1.
Select the blank line (--:--) you wish to set an alarm to.
2. Enter the desired time.
3. Press [Save].
To Change the Type of Repeat Options
1. On the Set Alarm screen, select “Repeat”.
2. Select from “Once Only”, “Every Day” or “Selected
Days”.
“Once Only”: The alarm sounds once only.
“Every Day”: The alarm sounds every day at
the specified time.
“Selected Days”: The alarm sounds on the selected
day/days of the week at the
specified time.
To Change the Type of Alarm Tone or Video Clip
File
1. On the Set Alarm screen, select “Assign Tone/
Video”.
2. Select “Assign Tone” and then select “Preset
Sounds” or “My Sounds”, or select “Assign Video”.
3. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a
Ringtone for an Incoming Call” on page 110.
To Change the Snooze of the Alarm Tone
1. On the Set Alarm screen, select “Snooze”.
2. Select the desired snooze option.
(M 7)
(M 7-1)
Organiser & Tools 99
To Change the Alarm Volume
1. On the Set Alarm screen, select “Alarm Volume”.
2. Press a (or d) to increase the volume or press b
(or c) to decrease the volume.
Note
The alarm will not sound when “Alarm Volume” is
set to “Silent”. When the profile is set to “Silent”, the
“General Volume” setting (p. 110) has priority.
To Change the Vibration of Alarm Tone
1. On the Set Alarm screen, select “Vibration”.
2. Select “On”, “Link to Sound” or “Off”.
For details on selecting a vibration, see “Vibration”
on page 113.
To Change the Duration of the Alarm Tone
1. On the Set Alarm screen, select “Duration”.
2. Select the desired duration.
Resetting an Alarm
“Organiser & Tools”
“Alarms”
1. Highlight the alarm you wish to reset.
2. Press [Options] and select “Reset Alarm”.
Resetting All Alarms
“Organiser & Tools”
“Alarms”
1. Select “Clear All”.
100 Organiser & Tools
Calculator
The calculator function performs the 4 arithmetic
calculations using up to 12 digits.
“Organiser & Tools”
“Calculator
Key operations for calculation are as follows:
To enter a decimal point, press P.
To clear the entered number or function, press
[Clear].
To do the calculations, press B.
To start a new calculation, press [Clear].
Rate Conversion
You can also use the calculator as a currency calculator
to convert from/to a home currency using a conversion
rate that you enter.
To Set a Currency Conversion Rate
“Organiser & Tools”
“Calculator”
[Options]
“Currency Converter”
“Exchange Rate”
1. Select “Domestic” or “Foreign”.
2. Enter the currency conversion rate.
To Convert a Value
“Organiser & Tools”
“Calculator”
1. Enter the value to be converted.
2. Press [Options] and select “Currency Converter”.
3. Select “Convert to Domestic” or “Convert to
Foreign”.
(M 7-2)
Organiser & Tools 101
Voice Recorder
This allows you to record a voice clip, which can be
used to remind you of schedule entries or be sent within
a multimedia message. The recorded voice clip is saved
in My Items (Music & Ringtones). Voice clips are
saved in .amr format.
Recording a Voice Clip
“Organiser & Tools”
“Voice Recorder”
1. Press B to start recording.
To stop recording before the recording time is over,
press B.
2. Select “Save” to save the voice clip.
Note
Press a (or V) or b (or W) to adjust the sound
volume when playing back the recorded file.
Sending Voice Clips
“Organiser & Tools”
“Voice Recorder”
1. Press B to start recording.
To stop recording before the recording time is over,
press B.
2. Select “Save and Send”.
3. Select “As Message” or “To Media Album”.
For details on creating a message, see “Creating a
New Message” on page 52.
(The Media Album service is not available with
some service providers. Please contact your service
provider for more information.)
Selecting the Record Time
“Organiser & Tools”
“Voice Recorder
[Options]
“Record Time”
1. Select “For Message” or “Extended Voice”.
When selecting “Extended Voice”, voice clips are
automatically saved to a memory card.
Selecting Storage Memory
“Organiser & Tools”
“Voice Recorder
[Options]
“Save New Sounds”
1. Select the desired location.
When selecting “Choose bef. Saving”, you can
select the location when saving a voice clip.
(M 7-3)
102 Organiser & Tools
Stopwatch
You can store 4 lap times when using the stopwatch
function.
“Organiser & Tools”
“Stopwatch”
1. Press B to start.
Press [LAP] to view the lap time before the
stopwatch stops. Last 4 lap times are saved.
2. Press B to stop.
Tip
You can save a record of lap times and the stop time
by pressing [Options] and selecting “Save to
Templates”.
Resetting Time
1. After stopping the stopwatch, press [Options] and
select “Reset”.
Tasks
You can register your schedule as task entries for a
given date or time.
Creating a New Entry
“Organiser & Tools”
“Tasks”
1. Select “Add New Entry”.
2. Enter the subject.
3. Enter the due date and time.
4. Press [Save].
Note
If the date and time settings have not been entered,
the date and time entry screen is displayed (p. 117).
To Select the Reminder Time
1. On the New Entry screen, select “Reminder”.
2. Select “Reminder Time”.
3. Select the reminder time.
When selecting “Other”, enter the desired reminder
date and time.
(M 7-4) (M 7-5)
Organiser & Tools 103
To Change the Type of Alarm Tone or Video Clip
File
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Assign Tone” and then select “Preset
Sounds” or “My Sounds”, or select “Assign Video”.
4. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a
Ringtone for an Incoming Call” on page 110.
To Change the Duration of Alarm Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Duration”.
3. Select the desired duration.
To Change the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the task entry.
To Make the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to make the data secret or select “Off
to leave it as it is.
Making the Entry Completed or Incomplete
“Organiser & Tools”
“Tasks”
1. Highlight the desired entry.
2. Press B.
3. On the view screen, press [Options] and select
“Check”.
To make the entry incomplete, select “Uncheck”.
Finding a Task Entry
“Organiser & Tools”
“Tasks”
1. Press [Options] and select “Find”.
2. Enter a few letters of the subject.
Search results are displayed in time order.
104 Organiser & Tools
Sending a Task Entry
“Organiser & Tools”
“Tasks”
1. Highlight the task entry you wish to send.
2. Press [Options] and select “Send”.
3. Select “As Message” or “Via Bluetooth”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 122.
Note
When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
Viewing the Memory Status
“Organiser & Tools”
“Tasks”
1. Press [Options] and select “Memory Status”.
Deleting Entries
“Organiser & Tools”
“Tasks”
[Options]
“Delete”
1. Select the desired option.
“This Task”: Deletes the selected entry.
“All Completed Tasks”: Deletes all checked
entries.
“All Tasks”: Deletes all entries.
World Clock
Setting the Time Zone
“Organiser & Tools”
“World Clock”
1. Press [Edit] and select “Set Time Zone”.
The current time zone is indicated by red line on the
world map.
2. Press c or d to change the time zone.
3. Press B.
To Set the Custom Time Zone
“Organiser & Tools”
“World Clock”
1. Press [Edit] and select “Set Time Zone”.
2. Press [Options] and select “Set Custom Zone”.
3. Enter the desired city name and time.
Setting the Daylight Saving
“Organiser & Tools”
“World Clock”
1. Press [Edit] and select “Daylight Saving”.
2. Select “On” or “Off”.
(M 7-6)
Organiser & Tools 105
Countdown Timer
“Organiser & Tools”
“Countdown Timer”
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press B to start counting.
3. Press B to pause.
Press B again to continue counting.
4. If the countdown has finished, press [Cancel] and
then press B to start the countdown again.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and
select “Edit”.
2. Modify the desired time.
E-Book
This function allows you to view E-Book files (XMDF
or Text files) stored on a memory card or in the Other
Documents folder.
“Organiser & Tools”
“E-Book
1. Select the desired file.
To scroll the screen up and down (to previous or
new line), press a or b. To jump to the previous or
the following pages, press c or d.
2. Press F when finished.
Tip
When a call arrives while the viewer is on or when
you exit an E-Book, “Auto Bookmark1” is
automatically added on the last page you have
viewed. The page with the bookmark automatically
opens when you select the file the next time. The new
bookmark is now “Auto Bookmark1”, turning the
previous bookmark to “Auto Bookmark2”.
(M 7-7) (M 7-8)
106 Organiser & Tools
Adding a Bookmark
You can add up to two bookmarks to each E-Book file.
“Organiser & Tools”
“E-Book
1. Select the desired file.
2. Press [Options] and select “Bookmark”.
3. Select “Bookmark1” or “Bookmark2”.
Note
E-Book files cannot be viewed while “Music”,
“Games” or “Applications” is in use.
If you remove the memory card while the E-Book in
the memory card is in use, a confirmation message
appears and your phone returns to standby.
Expenses Memo
You can record an expenses memo with predefined or
edited categories.
Recording in the Expenses Memo
“Organiser & Tools”
“Expenses Memo”
“Add
New Expense”
1. Enter the expenses using the digit keys.
2. Select the desired category.
Expenses memo is registered.
Viewing Totals
“Organiser & Tools”
“Expenses Memo”
“Totals”
Recorded expenses are displayed on the screen.
To Change Category
1. In the total view, select the desired item.
2. Press [Options] and select “Change Category”.
3. Select the desired category.
(M 7-9)
(M 7-9-1)
(M 7-9-2)
Organiser & Tools 107
To Change Amount
1. In the total view, select the desired item.
2. Press [Options] and select “Change Amount”.
3. Enter the desired amount using the digit keys.
To Delete a Recorded Item or All Items
1. In the total view, select the desired item.
2. Press [Options] and select “Delete Item” or “Delete
All”.
Editing the Category Name
“Organiser & Tools”
“Expenses Memo”
“Edit
Category”
1. Select the desired category name.
2. Modify the name.
Phone Help
You can view the help list and use it to guide you in the
phone’s functions.
“Organiser & Tools”
“Phone Help”
1. Press a or b.
(M 7-9-3)
(M 7-10)
108 SIM Application
SIM Application
You can refer to the information on the SIM. Contact
your service provider for further details.
(M 10)
Settings 109
Settings
The settings contain the following four tabs.
You can select the desired tab with the c/d key, and
after that select the item you wish to customise in the
selected tab with the a/b key.
Tab 1: “Phone Settings”
Tab 2: “Connectivity”
Tab 3: “Call Settings
Tab 4: “Network Settings
Phone Settings
Profiles
The ringtone, sound, vibration and light settings can be
customised for each profile according to your
environment.
There are 6 profiles: “Normal”, “Meeting”, “Activity”,
“Car”, “Headset” and “Silent”.
Activating a Profile
“Settings”
“Phone Settings”
“Profiles”
1. Select the desired profile.
Note
When a profile is set, the corresponding indicator
described on page 19 is displayed in standby.
Tip
In standby, press and hold R to switch Profiles
between Silent mode and the profile most recently
activated.
(M 12) (Tab 1)
(M 12-1)
110 Settings
Resetting Profile Settings
“Settings”
“Phone Settings”
“Profiles”
1. Highlight the profile you wish to reset.
2. Press [Options] and select “Set to Default”.
3. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 121.
Volume
You can adjust the volume for incoming voice calls,
SMS/MMS/Email messages and other sounds
(“General Volume”) to one of six levels, or set an
increasing volume for all of these except “General
Volume”.
“Settings”
“Phone Settings”
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Volume”.
4. Select “For Incoming Call”, “For New Message” or
“General Volume”.
5. Press a (or d) to increase the ringer volume or
press b (or c) to decrease the ringer volume and
then press B.
To select “Increasing Volume”, press a (or d) at
level 5.
To select “Silent”, press b (or c) at level 1.
Tip
You can select from two levels or an increasing
volume, when selecting the “Silent” profile.
Assigning a Ringtone for an Incoming Call
You can set a ringtone for incoming voice and video
calls. You can select from different tones including
patterns, sound effects and melodies or set a sound in
Saved Sounds as the default ringtone.
“Settings
“Phone Settings”
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
Settings 111
4. Select “For Voice Call” or “For Video Call”.
5. Select “Assign Tone”.
6. Select “Preset Sounds” or “My Sounds”.
7. Highlight the ringtone you wish to use.
To hear the demo play, press [Options] and select
“Play”.
8. Press [Options] and select “Assign” for “Preset
Sounds” or “Select” for “My Sounds”.
Note
Even if you delete a sound that is being used as a
ringtone, the setting remains the same and the default
ringtone sounds.
Melodies can be selected from “My Sounds” and
“Preset Sounds”.
Assigning a Ring Video Clip for an Incoming
Call
You can set a ring video clip for incoming voice and
video calls. You can set a video clip in Saved Videos as
the default ring video clip.
“Settings”
“Phone Settings”
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
4. Select “For Voice Call” or “For Video Call”.
5. Select “Assign Video”.
6. Highlight the ring video clip file you wish to use.
To preview the file, press [Options] and select
“Play”.
7. Press [Options] and select “Select”.
112 Settings
Message Notification
When receiving messages, your phone will notify you
of their arrival with the ringtone or ring video you
specify.
“Settings”
“Phone Settings”
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
4. Select “For New Message”.
5. Select “Assign Tone” or “Assign Video”.
If “Assign Tone” is selected, select “Preset Sounds”
or “My Sounds”.
6. Highlight the desired ringtone or ring video clip.
For details on selecting a ringtone or a ring video,
see “Assigning a Ringtone for an Incoming Call” on
page 110 or “Assigning a Ring Video Clip for an
Incoming Call” on page 111.
7. Press [Options] and select “Assign” for “Preset
Sounds” or “Select”.
8. Select “For New Message” and select “Duration”.
9. Enter the desired duration of message notification in
2 digits using the digit keys.
Keypad Tones
When the keypad tone is set on, you will hear a
confirmation tone each time you press any keys.
“Settings
“Phone Settings”
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Keypad Tones”.
5. Highlight the desired tone pattern.
6. Press [Options] and select “Assign”.
Warning Tone
Your phone can be set to emit a warning tone when an
error occurs.
“Settings
“Phone Settings”
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Warning Tone”.
5. Select “Tone” or “Duration”.
For “Tone”, select “Off”, “Preset Sounds” or “My
Sounds”.
For “Duration”, select the desired time between 0.5
and 2 seconds.
Settings 113
Power On/Off Sound
Your phone can be set to emit a sound when it is
switched on or off.
“Settings”
“Phone Settings”
“Profiles
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Power On Sound” or “Power Off Sound”.
5. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “My
Sounds”.
For “Duration”, enter the desired duration of sound
in 2 digits using the digit keys.
Vibration
“Settings”
“Phone Settings”
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Vibration”.
4. Select “On”, “Link to Sound” or “Off”.
Tip
When the “Link to Sound” option is selected in step
4, the vibrator synchronises with your selected
melody to pulse in time with the melody. Please note
that not all melodies support the “Link to Sound”
option.
When you select “On” or “Link to Sound” in step 4,
is displayed in standby.
Any Key Answer
You can answer a call by pressing any key except F
or [Busy]. For details, see page 22.
“Settings”
“Phone Settings”
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Any Key Answer”.
4. Select “On” or “Off”.
114 Settings
Setting the Display
You can change the settings of the display.
Setting the Wallpaper
For the standby screen, 9 pictures are provided.
Pictures taken with the digital camera or images
downloaded from a WAP site can be used for
wallpapers.
To Set My Pictures
“Settings”
“Phone Settings”
“Display”
“Wallpaper”
1. Select “My Pictures”.
2. Select the desired picture.
3. After displaying the picture, press B.
Note
Some pictures cannot be used because of their
picture and data types.
If the picture in My Pictures is already set, it is
displayed in step 1. Press [Change] and select the
desired picture.
Eight pictures can be selected from “My Pictures”
and one from “Preset Pictures”.
System Graphics
Pictures can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Pictures taken with the digital camera or images
downloaded from a WAP site can be used.
To Use Preset Animation/Pattern
“Settings
“Phone Settings”
“Display
“System Graphics”
1. Select the desired scene to set the picture to.
2. Select “Preset Animation” when you select “Power
On” or “Power Off” in step 1.
Select “Pattern 1”, “Pattern 2” or “Pattern 3” when
you select “Incoming Voice Call”, “Incoming
Video Call” or “Alarm” in step 1.
(M 12-2)
(M 12-2-1)
(M 12-2-2)
Settings 115
To Set My Pictures
“Settings”
“Phone Settings”
“Display”
“System Graphics”
1. Select the desired scene to set the picture to.
2. Select “My Pictures”.
3. Select the desired picture.
4. After displaying the picture, press B.
5. Specify the area you wish to display using the
navigation keys, then press B.
Note
Some pictures cannot be used because of their
picture and data types.
If the picture in My Pictures is already set, it is
displayed in step 2. Press [Change] and select the
desired picture.
Themes
You can easily customise the display by using the
theme files.
The theme files downloaded from WAP site can be
used.
“Settings”
“Phone Settings”
“Display”
“Themes”
1. Select “Preset Themes” or “My Themes”.
2. Select the desired theme file.
Tip
Even after a theme is set, you can set a wallpaper
regardless of the set theme. In this case, the other
items follow the set theme.
Note
If you set your original image as a wallpaper, the
screen asking you to choose “Use Current
Wallpaper” or “Use Theme Wallpaper” is displayed
after step 2.
(M 12-2-3)
116 Settings
Setting the Font Weight
“Settings”
“Phone Settings”
“Display”
“Font Settings”
1. Select “Thin”, “Normal”, “Bold” or “Bolder”.
The preview image is displayed in the selected
weight.
Setting the Greeting Message
You can set the message which is displayed when the
phone is turned on.
“Settings”
“Phone Settings”
“Display”
“Greeting Message”
“Switch On/Off”
1. Select “On” or “Off”.
2. Select “Edit Message” and enter the message (up to
10 characters).
Backlight
The backlight will shut off if you do not press the
keypad for a certain length of time. You can specify a
desired time to elapse before the backlight shuts off,
which will help conserve battery life.
Tip
When you purchase this phone, Backlight is set to 15
seconds.
To Select the Backlight Time Out
“Settings
“Phone Settings”
“Display
“Backlight”
“Time Out”
1. Select the desired time.
Select “Off” to shut it off.
To Adjust the Brightness of the Backlight
“Settings
“Phone Settings”
“Display
“Backlight”
“Brightness”
1. Press a (Light) and b (Dark) to switch between 4
levels of clarity.
2. Press B.
(M 12-2-4)
(M 12-2-5)
(M 12-2-6)
Settings 117
Setting the Display Saving
The screen of this phone will automatically turn off
after a given amount of time. You can change the length
of time before the Display Saving goes into effect,
which will help conserve battery life.
“Settings”
“Phone Settings”
“Display”
“Display Saving”
1. Select the desired time.
When you purchase this phone, Display Saving is
set to 2 minutes.
Note
Display Saving does not work while you are making
a call, using WAP, or using an application.
To cancel the Display Saving: The display saving
continues until either a key is pressed or there is an
incoming alert. The first key press only cancels this
function. You must press another key in order to enter
any numerical or text value.
Sounds & Alerts
You can use this menu to check or edit the current
Profiles settings (except “Any Key Answer”).
Date & Time
You need to set the correct time and date in order for
your phone’s various time-based functions to work
correctly.
“Settings”
“Phone Settings”
“Date & Time
“Set Date/Time”
1. Enter the day, month, year and time using the digit
keys.
Tip
When you enter the time in the 12-hour format, press
a or b to switch between am and pm. The order in
which the date and time is displayed is based on the
format setting.
Setting the Daylight Saving
“Settings”
“Phone Settings”
“Date & Time
“Daylight Saving”
1. Select “On” or “Off”.
(M 12-2-7) (M 12-3)
(M 12-4)
(M 12-4-2)
118 Settings
Setting the Time Zone
“Settings”
“Phone Settings”
“Date & Time
“Set Time Zone”
1. Press c or d to select the home city to set.
2. Press B.
Customising the Time Zone
“Settings”
“Phone Settings”
“Date & Time
“Set Time Zone”
[Options]
“Set Custom Zone”
1. Enter the city name.
2. Enter the time-zone differences using the digit keys.
Press a or b to switch between and +.
3. Press B.
Display Date & Time
You can display the calendar or the current date and/or
time in standby.
To Display the Clock on the Display
“Settings”
“Phone Settings”
“Date & Time
“Display Date & Time”
“Show Clock”
1. Select the desired clock type or “Off” to set clock
display off.
To Set the Calendar Display
“Settings
“Phone Settings”
“Date & Time”
“Display Date & Time”
“Show Calendar”
1. Select the desired calendar type or “Off” to set
calendar display off.
World Clock
For details, see page 104.
Selecting the Time Format
“Settings
“Phone Settings”
“Date & Time”
“Time Format
1. Select “24 Hour” or “12 Hour”.
Selecting the Date Format
“Settings
“Phone Settings”
“Date & Time”
“Date Format”
1. Select from “D.M.Y”, “M-D-Y” or “Y/M/D”.
Setting the Calendar Format
“Settings
“Phone Settings”
“Date & Time”
“Calendar Format”
1. Select “Sunday-Saturday” or “Monday-Sunday”.
(M 12-4-3)
(M 12-4-4)
(M 12-4-5)
(M 12-4-6)
(M 12-4-7)
(M 12-4-8)
Settings 119
Language Setting
You can change the language displayed on the phone.
“Settings”
“Phone Settings”
“Language”
1. Select the desired language.
Tip
You can also change the input language on the text
entry screen (p. 31).
Note
If you select “Automatic” in step 1, the language
preset on the SIM card is selected.
If the language preset on the SIM card is not
supported, then the default language of the phone is
selected.
Shortcuts
You can change the default shortcut action/assignment
of the a, b, c, d, A and C soft keys and the U
key itself with the Shortcuts menu.
The menu shows the current assignment of each of the
above keys.
“Settings”
“Phone Settings”
“Shortcuts”
1. Highlight the key you wish to change.
2. Press [Assign].
3. Press a and b to scroll by item.
Press c and d to scroll by group.
4. Press [Select] to update the key for the highlighted
item.
Note
If you are outside of your network area, the network-
related items are not available.
Tip
You can clear the settings by selecting “Set to
default” in step 1.
Locks
Auto Keypad Lock
When the Auto Keypad Lock is set, the keypad is
automatically locked after 15 seconds in standby if no
operation is performed.
“Settings”
“Phone Settings”
“Locks
“Auto
Keypad Lock
1. Select “On” or “Off”.
(M 12-5)
(M 12-6)
(M 12-7)
(M 12-7-1)
120 Settings
Enabling/Disabling the PIN Code
If the PIN code is enabled you are asked to enter the
PIN code each time the phone is switched on. Your PIN
code is registered on the SIM card and you should have
been made aware of the code when you purchased the
SIM card. Contact your service provider for further
details.
“Settings”
“Phone Settings”
“Locks”
“PIN
Entry
“Switch On/Off”
1. Select “On” to enable the PIN code or “Off” to
disable.
2. Enter your PIN code.
Note
If you enter the wrong PIN code three times in step 2,
the SIM card will lock. To remove the lock, contact
your service provider/SIM card vendor.
To Change the PIN Code
This allows you to change the PIN code registered on
the SIM card. Before you change the PIN code, select
“On” in step 1 in “Enabling/Disabling the PIN Code”.
“Settings”
“Phone Settings”
“Locks”
“PIN
Entry
“Change PIN”
1. Enter the existing PIN code.
2. Enter a new PIN code.
3. Enter the new PIN code again.
Changing the PIN2 Code
The PIN2 code is used to protect certain functions in the
phone such as Fixed Dialling Number and call cost
limits. The following shows you how to change the
PIN2 code. This menu may not be displayed depending
on the type of your SIM card.
“Settings
“Phone Settings”
“Locks”
“Change PIN2”
1. Enter the existing PIN2 code.
2. Enter a new PIN2 code.
3. Enter the new PIN2 code again.
Handset Lock
The Handset Lock prevents unauthorised use of the
phone or certain features on the phone when the power
is turned on. By setting this option on, your phone or
certain features on your phone are locked until the
correct handset code is entered.
“Settings
“Phone Settings”
“Locks”
“Handset Lock”
1. Select “On” or “Off”.
2. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 121.
(M 12-7-2)
(M 12-7-3)
(M 12-7-4)
Settings 121
Function Lock
By setting this option on, all the functions of your
phone will be locked until the correct handset code is
entered.
“Settings”
“Phone Settings”
“Locks”
“Function Lock”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code”.
To Turn Off the Function Lock
Enter your handset code in standby to turn the Function
Lock off.
Contacts Lock
The Contacts Lock function prevents unauthorised use
of your Contacts List.
“Settings”
“Phone Settings”
“Locks”
“Contacts Lock”
1. Select “On” to lock or “Off” to unlock.
2. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code”.
Showing Secret Data
By setting this option on, the hidden data can be
displayed.
“Settings”
“Phone Settings”
“Locks”
“Show
Secret Data”
1. Select “On” to display or “Off” to hide.
2. Enter your handset code when you select “On”.
For details on the handset code, see “Changing the
Handset Code”.
Changing the Handset Code
The default handset code is “9999”.
“Settings”
“Phone Settings”
“Locks”
“Change Handset Code”
1. Enter the old handset code.
2. Enter a new handset code.
3. Enter the new handset code again.
(M 12-7-5)
(M 12-7-6)
(M 12-7-7)
(M 12-7-8)
122 Settings
Master Reset
Resetting Settings from M1 to M12
“Settings”
“Phone Settings”
“Master Reset
“Reset Settings
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 121.
Note
Some settings are not deleted by this function. Data
stored in Contacts List, etc. is not deleted.
Resetting All Settings from M1 to M12 and All
Created Data
“Settings”
“Phone Settings”
“Master Reset
“Reset All”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 121.
Connectivity
Bluetooth
By configuring the settings in this menu, you can
connect to Bluetooth wireless technology enabled
phones via this connection, as well as a PC via
Bluetooth wireless technology.
For using the Bluetooth wireless function, you need to
search for other Bluetooth wireless technology enabled
devices to establish contact with your phone. Keep your
phone within a distance of 10 metres from the devices
before searching.
Using the Bluetooth Wireless Function
To Turn On or Off
“Settings
“Connectivity”
“Bluetooth”
“Switch On/Off”
1. Select “On” or “Off”.
When “On” is selected, the Bluetooth wireless
setting is activated, and ” is displayed.
(M 12-8)
(M 12-8-1)
(M 12-8-2)
(Tab 2)
(M 12-1)
(M 12-1-1)
Settings 123
To Show or Hide Your Phone
“Settings”
“Connectivity”
“Bluetooth
“Visibility”
1. Select the desired visibility settings.
“Show My Phone”: Allows other devices to
recognise your phone.
“Hide My Phone”: Hides your phone from
other devices.
To Search for Devices to be Paired
A maximum of 16 devices can be searched for.
“Settings”
“Connectivity”
“Bluetooth
“Search for Devices”
1. Select the desired device for pairing.
2. Enter the device passcode.
Note
You can search for devices even when the Bluetooth
wireless function is off. Once pairing is started, the
phone turns the Bluetooth wireless function on
automatically.
You can only select one device for pairing. To change
the paired device, see “To Activate the Paired
Device”.
Tip
You can save battery power by turning the Bluetooth
wireless function off while it is not in use. Turn the
Bluetooth wireless function off in “To Turn On or
Off” on page 122 or in “To Turn Off Automatically”
on page 125.
During a call, you can divert voice calls to the paired
handsfree device. Press [Options], select “Transfer
Audio” and then “To Handset” or “To Bluetooth”.
To Activate the Paired Device
Paired devices are listed by tabs for all devices and for
handsfree devices.
“Settings”
“Connectivity”
“Bluetooth”
“Paired Devices
1. Press d to switch to the list for handsfree devices.
2. Select the desired device you wish to activate.
(M 12-1-2)
(M 12-1-3) (M 12-1-4)
124 Settings
To Check and Uncheck the Paired Handsfree
Devices
“Settings”
“Connectivity”
“Bluetooth”
“Paired Devices
1. Press d to switch to the list for handsfree devices.
2. Highlight the desired handsfree device.
3. Press [Options] and select “Check” or “Uncheck”.
To Rename or Delete the Paired Devices
“Settings”
“Connectivity”
“Bluetooth”
“Paired Devices
1. Press c or d to switch between all paired devices
and handsfree devices.
2. Highlight the desired device.
3. Press [Options].
4. Select “Change Name” or “Delete”.
You can rename or delete by pressing B after
selecting desired device.
To Send All Data to Other Devices
You can send all the data for applications such as
Contacts List, Calendar, Tasks, etc. to selected devices.
“Settings
“Connectivity”
“Bluetooth”
“Send All”
1. Select the desired device.
If a device is not specified, searching starts
automatically.
2. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 121.
3. Select the desired data to send.
4. Enter the device passcode for unpaired devices.
Note
If the handsfree device is connected, the confirmation
screen to deactivate the handsfree function is
displayed. Press [Yes] to deactivate.
(M 12-1-5)
Settings 125
Bluetooth Wireless Settings
With this setting you can rename your phone, prevent
other phones from recognising your phone, turn the
Bluetooth wireless function off automatically to save
battery power, etc.
To Rename Your Phone
You can rename your phone. The name is shown in
other devices when your phone is detected.
“Settings”
“Connectivity”
“Bluetooth
“Bluetooth Settings”
“Device Name”
1. Enter the new device name.
To Turn Off Automatically
“Settings”
“Connectivity”
“Bluetooth
“Bluetooth Settings”
“Bluetooth Timeout
1. Select the desired time.
Your phone turns the function off automatically
after the specified time.
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two
modes; talking with the handsfree kit or talking with the
phone.
“Settings”
“Connectivity”
“Bluetooth”
“Bluetooth Settings”
“Handsfree Setting”
1. Select “Private mode” or “Handsfree mode”.
“Private mode”: For talking with the phone
“Handsfree mode”: For talking with the handsfree
kit
To Turn the Authentication Request On or Off
You can request the sender or receiver of the OBEX
data to authenticate the passcode (exchanging the
passcode) before pairing devices.
“Settings”
“Connectivity”
“Bluetooth”
“Bluetooth Settings”
“Authentication”
1. Select “On” or “Off”.
Note
No authentication is required for the paired devices.
Even if you select “Off”, you may authenticate the
passcode when the sender requests it.
(M 12-1-6)
126 Settings
To See Your Phone Details
“Settings”
“Connectivity”
“Bluetooth”
“Bluetooth Settings
“My Phone Details”
Memory Card
Making and Restoring a Backup File
With a memory card inserted in your phone, you can
make backup files of Bookmarks, Text, Contacts,
Calendar and Tasks in the handset memory card to the
memory card. You can also restore the backup data
from the memory card.
To Make a Backup File
“Settings”
“Connectivity”
“Memory Card”
“Backup/Restore”
“Backup”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 121.
2. Select the desired item to backup or “Select All” to
backup all files.
To Restore a Backup File
“Settings
“Connectivity”
“Memory Card”
“Backup/Restore”
“Restore”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 121.
2. Select the desired item to restore or “Select All” to
restore all files.
3. Select the desired file to restore.
A confirmation message indicating deletion from
the handset memory is displayed.
4. Press [Yes] to start restoring.
Note
To delete a backup file, highlight the desired item,
press [Options] and select “Delete” after performing
steps 1 to 3.
Formatting Memory Card
“Settings
“Connectivity”
“Memory Card”
“Format Card
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 121.
2. Press [Yes] to start formatting.
(M 12-2)
(M 12-2-1)
(M 12-2-3)
Settings 127
Call Settings
Video Call Settings
Set various types of functions and services for video
calls.
Selecting an Image for the Alternative
Image
You can select an image shown to the other party
between the sub camera image and an alternative image
from the saved picture files.
“Settings”
“Call Settings”
“Video Call Settings”
“Camera Picture”
1. Select “Default Image” or “Alternative Image”.
For “Default Image”, select “Internal Camera”,
“External Camera” or “Alternative Image”.
For “Alternative Image”, select “Preset Picture” or
“My Pictures”.
Turning On or Off the Speaker
“Settings”
“Call Settings”
“Video Call Settings”
“Loudspeaker”
1. Select “On” to turn on the loudspeaker or select
“Off” to turn it off.
Selecting the Picture Quality
Select the desired data format for your environment.
“Settings”
“Call Settings”
“Video Call Settings”
“Incoming Picture Quality”
“Settings”
“Call Settings”
“Video Call Settings”
“Outgoing Picture Quality”
1. Select “Normal”, “Quality Priority” or “Frame Rate
Priority”.
Select “Frame Rate Priority” to perform faster
communication.
Backlight
With this setting On, the phone’s backlight is on when
making a video call.
“Settings”
“Call Settings”
“Video Call Settings”
“Backlight
1. Select “Always On”, “Always Off” or “As Normal
Setting”.
The “As Normal Setting” option depends on the
backlight setting of the display (p. 116).
(Tab 3)
(M 12-1)
(M 12-1-1)
(M 12-1-2)
(M 12-1-3) (M 12-1-4)
(M 12-1-5)
128 Settings
Mute
You can mute the microphone while making a video
call.
“Settings”
“Call Settings”
“Video Call Settings”
“Mute Microphone”
1. Select “On” to mute or “Off” to cancel mute.
Assigning Hold Guidance Picture
You can display an image saved in the phone on your
display while you are putting a call on hold.
“Settings”
“Call Settings”
“Video Call Settings”
“Hold Guidance Picture”
1. Select “Preset Picture” or “My Pictures”.
2. Select the desired picture.
Voicemail & Diverts
This service can be used to divert incoming calls that
you cannot answer. Calls can be diverted to another
phone number or to your Voicemail system.
Note
This service may not be available on all mobile phone
networks. Contact your service provider for more
information.
To Set the Voicemail Numbers
You can divert calls to the network Voicemail service
centre. Depending on whether you are inside or outside
your network area, you can set two Voicemail numbers,
a number for your home network area or for a roaming
network area.
Note
This service depends on the SIM card. Contact your
SIM card vendor for more information.
“Settings
“Call Settings”
“Voicemail &
Diverts”
“Voicemail
“Settings
“Voicemail
Numbers”
1. Select “Home Mailbox No.” or “Roam Mailbox
No.”.
2. Enter the desired phone number.
(M 12-1-6)
(M 12-1-7)
(M 12-2)
Settings 129
To Access the Voicemail Centre
1. Press and hold G in standby.
To Activate the Voicemail Service
“Settings”
“Call Settings”
“Voicemail &
Diverts”
“Voicemail”
“Activate
1. Select one of the following options:
“Always”: Diverts all calls without
ringing.
“When Busy”: Diverts incoming calls while
you are talking on the phone.
“No Answer”: Diverts incoming calls if you
do not answer a call within a
certain period of time.
“Not Reachable”: Diverts incoming calls when
your phone has no network
service or is switched off.
If you select “No Answer”, select the period of time
from 6 levels (05 to 30 seconds).
2. Press B.
To Activate the Diverts Service
Select the appropriate option.
“Settings”
“Call Settings”
“Voicemail &
Diverts”
“Diverts”
1. Select “Activate” or “By Service”.
If you select “By Service”, you can select further
divert options.
2. Select from “Always”, “When Busy”, “No Answer”
or “Not Reachable”.
If you select “No Answer”, select the period of time
from 6 levels (05 to 30 seconds).
3. Enter a phone number to which you wish to divert
calls or search for it in the Contacts List (p. 36).
4. Press B.
Note
When “Voice Calls” diverts are set to “Always”,
is displayed in standby.
130 Settings
To Check the Diverts Status
“Settings”
“Call Settings”
“Voicemail &
Diverts”
“Status”
1. Select the diverts option you wish to check.
To Deactivate the Diverts/Voicemail Service
“Settings”
“Call Settings”
“Voicemail &
Diverts”
“Deactivate”
1. Select the desired option.
To Cancel the Diverts and Voicemail Service
Once you have changed the diverts settings, you can
cancel them all with this service.
“Settings”
“Call Settings”
“Voicemail &
Diverts”
“Cancel All”
Showing My Phone Number
This lets you control whether to show your phone
number when calling another party or not.
“Settings”
“Call Settings”
“Show My Number”
1. Select “On”, “Off” or “Status”.
Note
Some networks do not support this service. Please
check with your service provider for availability.
Time & Cost
Displaying Call Costs
“Settings
“Call Settings”
“Time & Cost”
“Display Call Cost”
1. Select “On” or “Off”.
Displaying Call Time Counter
“Settings
“Call Settings”
“Time & Cost”
“Call Time Counter”
1. Select “On” or “Off”.
Restrict Calls
This function lets you place restrictions on incoming
and outgoing calls. To activate this option you will need
the specified password, which is available from your
service provider.
“Settings
“Call Settings”
“Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
“Outgoing Calls”: Restricts outgoing calls.
“Incoming Calls”: Restricts incoming calls.
2. Select one of the following options:
(M 12-3)
(M 12-4)
(M 12-4-1)
(M 12-4-2)
(M 12-5)
Settings 131
(For “Outgoing Calls”)
“Bar All Outgoing Calls”:
Restricts all outgoing calls
except emergency calls.
“Bar International Calls”:
Restricts all outgoing
international calls.
“Only Local & Home”:
Restricts all outgoing
international calls except to
your home country.
(For “Incoming Calls”)
“Bar All Incoming Calls”:
Restricts all incoming calls.
“Bar if Abroad”: Restricts all incoming calls
when you are outside of the
coverage from your
registered service provider.
3. Select one of the following options:
“All Services”: Restricts all services.
“Voice Calls”: Restricts all voice calls.
“Video Calls”: Restricts all video calls.
“Data”: Restricts all data calls.
“Fax”: Restricts all fax calls.
“Messages”: Restricts all messages.
4. Select “On”, “Off” or “Status”.
5. Enter the network password.
To Cancel Settings
“Settings”
“Call Settings”
“Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
2. Select “Cancel All”.
3. Enter the network password.
Rejecting an Incoming Call
You can register phone numbers you do not wish to
answer.
To Reject the Registered Number
“Settings”
“Call Settings
“Restrict Calls”
“Rejected Numbers”
“Switch On/Off
1. Select “On” or “Off”.
To Register the Rejected Number
“Settings”
“Call Settings
“Restrict Calls”
“Rejected Numbers”
“Set Rejecting Number”
1. Select a blank field.
2. Enter the desired number.
132 Settings
Rejecting Withheld Calls
“Settings”
“Call Settings
“Restrict Calls”
“Withheld Call”
1. Select “On” or “Off”.
Changing the Network Password
“Settings”
“Call Settings”
“Restrict Calls”
“Change N/W Password”
1. Enter the old network password.
2. Enter a new network password.
3. Enter the new network password again.
If you enter the incorrect password, you are asked to
enter the password again.
4. Press B.
Fixed Dialling Number
When the Fixed Dialling Number is enabled, you can
only call pre-registered numbers.
To Enable Fixed Dialling Number
“Settings
“Call Settings”
“Restrict Calls”
“Fixed Dialling Number”
1. Enter your PIN2 code.
2. Select “Switch On/Off”.
3. Select “On” to enable this function.
To Add a New Name
“Settings
“Call Settings”
“Restrict Calls”
“Fixed Dialling Number”
1. Enter your PIN2 code.
2. Select “Edit Dial List”.
3. Highlight the blank entry, press [Options], then
select “Add New Dial”.
4. Add a name and a phone number.
For details on adding a name and phone number, see
“Add New Contact” on page 35.
5. Press [Save].
Settings 133
Minute Minder
Minute Minder function informs you of your talk time
by sounding a tone after every minute.
“Settings”
“Call Settings”
“Minute Minder”
1. Select “On” or “Off”.
Call Waiting
Note
This service may not be available on all mobile phone
networks. Contact your service provider for more
information.
If you wish to be able to receive another incoming call
while you have a call in progress, you must activate the
Call Waiting service.
“Settings”
“Call Settings”
“Call Waiting”
1. Select “On”, “Off” or “Status”.
Auto Redial
“Settings”
“Call Settings”
“Auto Redial
1. Select “On” or “Off”.
Network Settings
Selecting a Service Automatically
Each time the power is turned on, your phone selects a
service automatically.
“Settings”
“Network Settings”
“Select Service”
1. Select “Auto”.
Selecting a Service Manually
“Settings”
“Network Settings”
“Select Service”
1. Select “GSM”.
Selecting a Network
Selecting a Network Automatically
Each time the power is turned on, your phone always
tries to connect to the preferred network.
If your phone is not connected to the network, you can
perform the following immediately to establish the
preferred network connection.
“Settings”
“Network Settings”
“Select
Network”
“Automatic”
(M 12-6)
(M 12-7)
(M 12-8)
(Tab 4)
(M 12-1)
(M 12-2)
134 Settings
Setting the Network Manually
“Settings”
“Network Settings”
“Select
Network”
“Manual”
1. Select the desired network.
Adding a New Network
“Settings”
“Network Settings”
“Select
Network”
“Add New Network”
If there are no entries, press B and go to step 2.
If there is an entry, press B and perform the following
steps.
1. Select “Add”.
2. Enter the country code (up to 3 digits).
3. Enter the network code (up to 3 digits).
4. Enter a new network name (up to 25 characters).
5. Enter either 2G (GSM) or 3G for the network type.
Editing the Preferred List
“Settings”
“Network Settings”
“Select
Network”
“Set Preferred”
1. Select the name of the network you wish to edit.
2. Select “Insert” to insert over the selected position,
“Add to end” to insert at the end or “Delete” to
delete.
Flight Mode
When the Flight Mode is set to “On”, the phone cuts off
the network connections and stops searching for
available networks to connect. With this mode, you can
play games or music even when you fly.
“Settings
“Network Settings”
“Flight Mode”
1. Select “On” or “Off”.
Internet Settings
Note
In normal operations, you do not need to change the
settings.
Internet settings have already been entered in your
phone depending on your service provider. You may
have restrictions on viewing, deleting, copying or
modifying the settings. Contact your service provider
for details.
(M 12-3)
(M 12-4)
Settings 135
WAP Settings
“Settings”
“Network Settings”
“Internet
Settings”
“WAP Settings”
“Create New”
“Profile Name”: WAP profile name (Unique
name)
“Proxy”: Proxy setting for WAP
(When “Use Proxy” is On)
“Access Point”: Access point for WAP
(When “Use Proxy” is Off)
“Use Proxy”: Setting to connect by Proxy
or not
“Home”: Home page URL (When
“Use Proxy” is Off)
Streaming Settings
“Settings”
“Network Setting
“Internet
Settings”
“Streaming Settings”
“Create New”
“Profile Name”: Profile name for streaming
(Unique name)
“Proxy Address”: Proxy address
“Proxy Port Number”: Port number (1-65535)
“Access Point”: Access point
Proxy Settings
“Settings”
“Network Settings”
“Internet
Settings
“Proxy Settings”
“Create New”
“Proxy Name”: Proxy name (Unique name)
“Proxy Address”: IP address
“Access Point”: Access point
“Home”: Home page URL
“Port Number”: Port number (1-65535)
Authentication Type
”: Authentication Type
(“HTTP-BASIC” or
“HTTP-DIGEST”)
“User Name”: User name for
authentication
“Password”: Password for authentication
Access Point Settings
“Settings”
“Network Settings”
“Internet
Settings
“Access Point Settings”
“Create New”
“Access Point Name”: Access point name (Unique
name)
“APN”: APN setting
(M 12-4-1)
(M 12-4-2)
(M 12-4-3)
(M 12-4-4)
136 Settings
Authentication Type
”: Authentication type
(“NONE”, “PAP” or
“CHAP”)
“User Name”: User name for access point
“Password”: Password for access point
“DNS”: DNS (Domain Name
System)
“Linger Time”: Linger Time (1-99999 sec.)
Re-provisioning Settings
“Settings”
“Network Settings”
“Internet
Settings
“Re-provisioning Settings”
“Execute
Pending”
Clearing DNS Cache
“Settings”
“Network Settings”
“Internet
Settings
“Clear DNS Cache”
White List
“Settings
“Network Settings”
“Internet
Settings”
“White List”
“Create New”
“SMSC Address”: SMSC address
“SM Orig. Address”: SM originating address
To Activate the WAP/Streaming Profile
“Settings
“Network Settings”
“Internet
Settings”
1. Select “WAP Settings” or “Streaming Settings”.
2. Select the desired profile you wish to activate.
To Edit/Copy/Delete the WAP/Proxy/Streaming/
Access Point Profile
“Settings
“Network Settings”
“Internet
Settings”
1. Select “WAP Settings”, “Streaming Settings”,
“Proxy Settings” or “Access Point Settings”.
2. Highlight the desired profile.
3. Press [Options] and select the desired option.
“Edit”: Modify the desired item
“Copy”: Enter the new file name
“Delete”: Press [Yes] to delete
(M 12-4-5)
(M 12-4-6)
(M 12-4-7)
Settings 137
Cell Broadcasts
You can receive cell broadcast messages or general
messages such as weather forecasts and traffic reports.
This information is broadcast to subscribers in certain
network areas.
This function may not be available on all mobile phone
networks. Contact your service provider for more
information.
To Enable/Disable Cell Broadcasts
“Settings”
“Network Settings”
“Cell
Broadcasts”
“Switch On/Off”
1. Select “On” or “Off”.
To Read Cell Broadcast Messages
“Settings”
“Network Settings”
“Cell
Broadcasts”
“Read Messages”
1. Select the desired subject.
2. Scroll the screen to read the message.
3. Press [Back].
To Set Languages for Cell Broadcast Messages
“Settings”
“Network Settings”
“Cell
Broadcasts”
“Settings”
“Language”
The current language is displayed.
1. Press B to check.
2. Press [Save].
To Subscribe to Cell Broadcasts
Select the page of the cell broadcast message that you
want.
“Settings”
“Network Settings”
“Cell
Broadcasts”
“Settings”
“Set Info Subjects”
[Options]
1. Select “Add/Remove”.
2. Select the desired page.
3. Press [Save].
Tip
If the desired page is not in the list that appears in
step 2, select “Create Subject” in step 1, then enter
the subject code to add a page. For details on the
subject code, contact your service provider.
(M 12-5)
138 Settings
Area Info
The Area Info is the message information that operators
send to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed in standby.
To Enable/Disable Area Info
“Settings”
“Network Settings”
“Area Info”
1. Select “On” or “Off”.
Note
This function may not be available on all mobile
phone networks. Contact your service provider for
more information.
If Area Info is set to “On”, the standby time will
decrease.
Showing the Network Information
“Settings”
“Network Settings”
“Network
Information”
Information about the operator name, package and
services are displayed.
(M 12-6)
(M 12-7)
Call Log 139
Call Log
The phone will record the last 30 missed calls, received
calls and dialled numbers.
Viewing Call Log
“Call Log”
1. Select from “All Calls”, “Dialled Numbers”,
“Missed Calls” or “Received Calls”.
The selected call log list is displayed.
To switch logs, press c or d.
2. Select the phone number you wish to view.
If you wish to dial the number, press D.
Tip
You can also confirm call logs by pressing D in
standby.
Sending Messages
1. In the call log list, highlight the phone number or
name you wish to send a message to.
2. Press [Options] and select “Create Message”.
For details on creating a message, see “Creating a
New Message” on page 52.
Deleting a Call Log
1. In the call log list, press [Options] and select
“Delete” or “Delete All”.
(M 9)
140 Call Log
Call Timers
This function lets you check the duration of your calls.
Checking the Duration of the Last Call and All
Calls
“Call Log”
“Call Timers”
1. Select “Received Calls” or “Dialled Calls”.
Resetting Call Timers
“Call Log”
“Call Timers”
“Clear Timers”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 121.
Data Counter
You can confirm the number of bytes used in the 3G
(UMTS) and GSM transmission.
“Call Log”
“Data Counter
1. Select from “Last Data” or “All Data”.
Resetting All Data Counter
“Call Log”
“Data Counter
“Clear Counter
Call Costs
This function lets you check the charges for your calls.
Some networks do not support Charging Advice. Please
check with your service provider for availability.
Checking the Cost of the Last Call
“Call Log”
“Call Costs”
“Last Call”
Checking the Total Call Cost
“Call Log”
“Call Costs”
“All Calls
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
“Call Log”
“Call Costs”
“Cost Units”
“Set
Units”
1. Enter your PIN2 code.
2. Enter a currency unit (up to 3 characters).
3. Enter a cost per unit.
To enter a decimal point, press P.
(M 9-5)
(M 9-5-3)
(M 9-6)
(M 9-6-3)
(M 9-7)
(M 9-7-1)
(M 9-7-2)
(M 9-7-5)
Call Log 141
Setting the Charge Limit
This function is useful if you wish to make sure you do
not exceed a certain charge limit.
“Call Log”
“Call Costs”
“Max Cost”
“Set
Limit”
1. Enter your PIN2 code.
2. Enter a value.
Checking the Residual Credit
“Call Log”
“Call Costs”
“Residual Credit”
Resetting All Call Costs
“Call Log”
“Call Costs”
“Clear Costs”
1. Enter your PIN2 code.
(M 9-7-6)
(M 9-7-3)
(M 9-7-4)
142 Connecting 550SH to Your PC
Connecting 550SH to Your PC
You can use the following functions by connecting the
550SH to your PC using a USB port or Bluetooth
wireless technology port:
•3G/GSM modem
Handset Manager for 550SH
Sync Manager for 550SH
System Requirements
Operating System:
Windows 2000*, Windows XP**
* Service Pack 4 or later
** Service Pack 2 or later
Supported Software:
Microsoft Outlook/Outlook Express
Interface:
USB port or Bluetooth wireless port
CD-ROM drive
3G/GSM Modem
You can use 550SH as a 3G/GSM modem to access the
Internet from your PC. Connect your phone to your PC
via Bluetooth wireless technology or USB interface.
Software installation on your PC is required. For
details, see “Software Installation” on page 144.
Modem via the USB Cable
To use the modem function using a USB cable, use the
cable mentioned above and see the instructions
accompanying the cable.
Connecting 550SH to Your PC 143
Modem via Bluetooth connection
To use the modem function via Bluetooth wireless
technology interface, see “Using the Bluetooth
Wireless Function” on page 122 and turn the modem
function on.
Note
Modem communication is not possible while
communicating with the Handset Manager via
Bluetooth wireless technology or USB interface.
Your phone exhausts the battery when connected to a
PC, even when not communicating.
Handset Manager
You can transmit the following items between your
phone and your PC, and can use Contacts List entries on
your PC:
My Items files (Pictures/Music & Ringtones/Videos/
Other Documents data)
Contacts List entries
To use the Handset Manager function, see “Connecting
550SH to Your PC” on page 142 and set your phone to
standby.
Sync Manager
You can synchronise the following data with the data of
Microsoft Outlook or Outlook Express on your PC.
Contacts List entries.
Schedule entries.
Tip
You can set up Sync Manager to start up and
synchronise automatically after you connect your
phone to your PC via the USB data cable.
144 Connecting 550SH to Your PC
Software Installation
1. Insert the supplied CD-ROM into your CD-ROM
drive.
The 550SH CD-ROM screen is displayed.
If the 550SH CD-ROM screen is not displayed,
double-click [Launcher.exe] in your CD-ROM.
2. Press the desired button.
3. Follow the on-screen instructions to complete
installation.
Note
The phone may not recognise the USB data cable if it
is connected while an application (Camera, My
Items, etc.) is running. Connect the USB data cable in
standby.
3G/GSM modem
It is not recommended that you make or answer calls
when you are using 550SH as a 3G/GSM modem. The
operation may be interrupted.
Handset Manager, Sync Manager
It is not recommended that you answer calls when
you are using 550SH with Handset Manager/Sync
Manager.
Some large files may not be able to be transmitted
from the PC to the phone.
Applications (Camera, My Items, etc.) do not run
when the phone is connected to the PC via Bluetooth
wireless technology interface or USB data cable.
Data under copyright protection may not be sent
successfully.
Software Support
For details on software support, refer to the following
site:
http://www.sharp-mobile.com
Troubleshooting 145
Troubleshooting
Problem Solution
The phone does not
turn on.
Make sure the battery is
properly inserted and
charged.
PIN code or PIN2
code is rejected.
Make sure you have entered
the correct code (4 to 8
digits).
Your SIM card/protected
functions will become locked
after three unsuccessful
attempts.
Contact your SIM provider if
you do not have the correct
PIN code.
The SIM card
becomes locked.
Enter the PUK code (8 digits)
provided by your service
provider (if supported).
If the attempt is successful,
enter the new PIN code and
confirm your phone is
operational again. Otherwise
contact your dealer.
The display is
difficult to read.
Adjust the backlight
brightness for the display.
Phone functions do
not work after the
phone is turned on.
Check the radio signal
strength indicator as you may
be outside the service area.
Check to see if any error
message is displayed when
you turn your phone on. If so,
contact your dealer.
Make sure the SIM card is
correctly inserted.
Call quality is poor.
Your current location may not
provide good call quality (i.e.,
in a car or train). Move to a
location where radio signal
strength is greater.
Cannot send or
receive text
message.
Make sure you are correctly
subscribed for the Short
Message Service, that the
network supports this service,
and that the centre number is
set up correctly. If not, contact
your network service
provider.
Problem Solution
146 Troubleshooting
Calls cannot be
made or received.
If the message “Insert SIM
card” is displayed when the
phone is switched on, you
cannot use your SIM card or
the SIM card is damaged.
Contact your dealer or
network service provider.
Check your call barring, fixed
dialling setting, remaining
battery and call forwarding
settings.
Check if your phone is
currently performing data
communication using
Bluetooth wireless
technology interface or a USB
data cable.
Check the remaining balance
if you are using a pre-paid
SIM card.
Cannot access
network service.
Check where your account
has been registered and
where the service is
available.
Limited memory
available.
Delete any unnecessary data.
Problem Solution
Cannot connect to
Multimedia
Messaging Service
provider.
MMS settings and
configuration may be missing
or incorrect or the network
does not support it. Check
your service provider’s
access point number.
Contact your service provider
to confirm the correct
settings.
Call is terminated
unexpectedly.
Magnetised objects such as
health necklaces placed near
the phone may terminate the
call. Keep your phone away
from such objects.
No entries are
displayed in the
Contacts List.
Confirm that the Contacts
Location setting (Handset or
SIM) is correct.
Cannot receive
OBEX data.
The OBEX data can only be
received only in standby.
Problem Solution
Safety Precautions and Conditions of Use 147
Safety Precautions and
Conditions of Use
Your phone conforms to international regulations
insofar as it is used under normal conditions and in
accordance with the following instructions.
CONDITIONS OF USE
Electromagnetic waves
Do not switch on your phone aboard an aircraft (as
your phone may interfere with the aircraft’s
electronic systems). Current legislation forbids this
use and legal action can be taken against the user.
Do not switch on your phone in a hospital, except in
designated areas.
For body worn operation, this phone has been tested
and meets RF exposure guidelines when used with an
accessory that contains no metal and that positions
the handset a minimum of 15mm from the body. Use
of other accessories may not ensure compliance with
RF exposure guidelines.
Use of your phone’s function may affect the
performance of medical electronic units
(pacemakers, hearing aids, insulin pumps, etc.).
When the phone function is on, do not bring it near
medical equipment or into areas in which medical
equipment is being used. If you have a hearing aid or
a pacemaker, only use the phone on the opposite side
of your body from where it is located. The phone
should be kept at least 6 inches (15.24 cm) from a
pacemaker ANYTIME the phone is switched on.
Do not switch on your phone near gas or flammable
substances.
Observe the rules concerning the use of mobile
phones at gasoline stations, chemical plants and at all
sites where a risk of explosion exists.
148 Safety Precautions and Conditions of Use
Caring for your phone
Do not allow children to use your phone without
supervision.
Do not open or attempt to repair your phone yourself.
The product can only be repaired by authorised
service personnel.
Do not drop your phone or subject it to severe
impacts. Bending the body and pushing the display or
keys with extreme force could damage the phone.
Do not use solvents to clean your phone. Use only a
soft, dry cloth.
Do not carry your phone in your back pocket as it
could break when you sit down. The display is made
of glass and is particularly fragile.
Avoid touching the external connector on the
underside of the phone, since the delicate
components within can be damaged by static
electricity.
Battery
Use your phone only with batteries, chargers and
accessories recommended by the manufacturer. The
manufacturer disclaims any liability for damage
caused by the use of other chargers, batteries or
accessories.
Network configuration and phone usage will
affect talk-time and standby time.
Using the games or camera will hasten battery
consumption.
When the battery charging alert is displayed on
the screen, charge the battery as soon as possible.
If you continue using your phone ignoring the alert,
the phone may cease to function, and all data and
settings you have stored may be lost at any moment.
Before removing the battery from the phone, make
sure the phone is switched off.
Replace and charge the new battery as soon as
possible after removing the old one.
Safety Precautions and Conditions of Use 149
Do not touch the battery terminals. Batteries can
cause damage, injury or burns if a conductive
material touches exposed terminals. When the battery
is detached from the phone, use a cover made of
non-conductive material for keeping and carrying the
battery safely.
Do not open the memory card cover or remove the
memory card while formatting or writing to the
memory card. The card may be damaged beyond use.
Recommended temperature for using and storing
batteries is approximately 20°C.
The batteries’ performance is limited in low
temperatures, particularly below 0°C and the phone
may not work temporarily regardless of the amount
of remaining battery power.
Exposing the phone to extreme temperatures will
shorten battery life.
The battery can be charged and discharged hundreds
of times but it will eventually wear out. When the
operating time (talk-time and standby time) is
noticeably shorter than normal, it is time to buy a new
battery. CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE,
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
See “Battery Disposal” on page 12.
Memory Card
Do not remove or insert a memory card while data on
the card is being edited. Do not turn off the phone or
device containing the memory card while data on the
card is being edited as this may damage the data or
cause the card to stop functioning correctly.
Data may be lost under the following circumstances.
- If the phone is dropped, or shook, or force is applied
while the memory card is inserted.
- When the phone is used in areas that are exposed to
static electricity or electric noise.
Backup your important data in case data on the
memory cards are lost due to malfunctions.
Do not touch the metal terminals with your hands or
metal objects.
Do not bend the memory card or subject it to violent
impact. Keep it away from water and high
temperatures.
SHARP holds no responsibility for the loss or
damage of data contained on a memory card.
Keep all memory cards out of the reach of small
children.
150 Safety Precautions and Conditions of Use
Aerial Care
Do not cover the top of the phone (p. 10, No. 19) with
your hand when in use as this may interfere with the
performance of the built-in aerial. Call quality may
deteriorate leading to shortened talk-time and
standby time because the mobile phone has to operate
on a higher power level than is necessary.
Use only the aerial supplied or one approved by
Sharp for your mobile phone. Using unauthorised or
modified aerials may damage the mobile phone.
Moreover, since the mobile phone may violate the
appropriate regulations, it may lose performance or
exceed the limitation of SAR levels.
To avoid impaired performance, do not damage the
aerial of the mobile phone.
While talking directly to the microphone, please hold
the mobile phone so that the aerial is upwards over
your shoulder.
To avoid interfering with blasting operations, please
turn off the mobile phone in a blasting area or in a
place where a “turn off two-way radio” sign is
posted.
Camera Operation
Learn picture quality, file formats, etc. beforehand.
The taken pictures can be saved in JPEG format.
Be careful not to move your hand while taking
pictures.
If the phone moves while taking a picture, the picture
can become blurred. When taking a picture, hold the
phone firmly to prevent it from moving, or use the
delay timer.
Clean the lens cover before taking a picture.
Fingerprints, oils, etc. on the lens cover hinder clear
focusing. Wipe them off with a soft cloth before
taking a picture.
Safety Precautions and Conditions of Use 151
Others
As with any electronic storage unit, data may be lost
or corrupted under various circumstances.
Before connecting the phone with a PC or a
peripheral unit, read the operation manual for the
other unit carefully.
If the phone’s battery has been removed for some
time, or the phone has been reset, the unit’s clock and
calendar may be reinitialised. The date and time
should be updated in this case.
ENVIRONMENT
Keep your phone away from extreme heat. Do not
leave it on the dashboard of a car or near a heater. Do
not leave it in any place that is extremely damp or
dusty.
Since this product is not waterproof, do not use it or
store it where fluids such as water can splash onto it.
Raindrops, water spray, juice, coffee, steam,
perspiration, etc. will also cause malfunctions.
PRECAUTIONS CONCERNING
VEHICLE USE
It is the user’s responsibility to check the local laws
governing the use of a mobile phone in vehicles. Pay
full attention to driving. Pull off to the side of the
road, park the car, and switch off the engine before
making or answering a call.
Use of your phone’s function may interfere with the
vehicle’s electronic systems, such as the ABS
anti-lock brakes or the air-bag. To ensure no such
problem occurs, please check with your dealer or car
manufacturer before connecting your phone.
Only allow qualified service maintenance personnel
to install the vehicle accessories.
The manufacturer disclaims any liability for damage
which may result as a consequence of improper use or
use contrary to the instructions contained herein.
152 Safety Precautions and Conditions of Use
SAR
Your mobile device is a radio transmitter and receiver.
It is designed not to exceed the limits for exposure to
radio waves recommended by international guidelines.
These guidelines were developed by the independent
scientific organization ICNIRP and include safety
margins designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit for
mobile devices is 2 W/kg and the highest SAR value for
this device when tested at the ear was x.xxx W/kg*. As
mobile devices offer a range of functions, they can be
used in other positions, such as on the body as described
in this user guide**. In this case, the highest tested SAR
value is x.xxx W/kg.
As SAR is measured utilizing the devices highest
transmitting power the actual SAR of this device while
operating is typically below that indicated above. This
is due to automatic changes to the power level of the
device to ensure it only uses the minimum level
required to reach the network.
The World Health Organization has stated that present
scientific information does not indicate the need for any
special precautions for the use of mobile devices. They
note that if you want to reduce your exposure then you
can do so by limiting the length of calls or using a
‘hands-free’ device to keep the mobile phone away
from the head and body.
* The tests are carried out in accordance with
international guidelines for testing.
** Please see the CONDITIONS OF USE section on
page 147 about body worn operation.
Safety Precautions and Conditions of Use 153
INFORMATION ON PROPER
DISPOSAL
A. Information on Disposal for Users (private
households)
1. In the European Union
Attention: If you want to dispose of this equipment,
please do not use the ordinary dust bin!
Used electrical and electronic equipment must be
treated separately and in accordance with legislation
that requires proper treatment, recovery and recycling
of used electrical and electronic equipment.
Following the implementation by member states,
private households within the EU states may return
their used electrical and electronic equipment to
designated collection facilities free of charge*. In some
countries* your local retailer may also take back your
old product free of charge if you purchase a similar new
one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has
batteries or accumulators, please dispose of these
separately beforehand according to local requirements.
By disposing of this product correctly you will help
ensure that the waste undergoes the necessary
treatment, recovery and recycling and thus prevent
potential negative effects on the environment and
human health which could otherwise arise due to
inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your
local authorities and ask for the correct method of
disposal.
For Switzerland: Used electrical or electronic
equipment can be returned free of
charge to the dealer, even if you don’t
purchase a new product. Further
collection facilities are listed on the
homepage of www.swico.ch or
www.sens.ch.
Attention: Your product is marked with this symbol.
It means that used electrical and
electronic products should not be mixed
with general household waste. There is a
separate collection system for these
products.
154 Safety Precautions and Conditions of Use
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you
want to discard it:
Please contact your SHARP dealer who will inform you
about the take-back of the product. You might be
charged for the costs arising from take-back and
recycling. Small products (and small amounts) might
be taken back by your local collection facilities.
For Spain: Please contact the established collection
system or your local authority for take-
back of your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact
your local authorities and ask for the correct method of
disposal.
PRECAUTIONS FOR USE IN USA
Changes or modifications not expressly approved by
the manufacturer responsible for compliance could
void the user’s authority to operate the equipment.
Exposure to Radio Waves
THIS MODEL PHONE MEETS THE
GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications
Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on standards that
were developed by independent scientific organizations
through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety
margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/kg.* Tests for SAR are conducted using
standard operating positions specified by the FCC with
Safety Precautions and Conditions of Use 155
the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels so
as to use only the power required to reach the network.
In general, the closer you are to a wireless base station
antenna, the lower the power output.
Before a phone model is available for sale to the public,
it must be tested and certified to the FCC that it does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on
the body) as required by the FCC for each model. The
highest SAR value for this model phone when tested for
use at the ear is 0.996 W/kg and when worn on the
body, as described in this user guide, is 0.800 W/kg.
Body-worn Operation; This device was tested for
typical body-worn operations with the back of the
phone kept 1.5 cm from the body. To maintain
compliance with FCC RF exposure requirements, use
accessories that maintain a 1.5 cm separation distance
between the user’s body and the back of the phone. The
use of belt-clips, holsters and similar accessories should
not contain metallic components in its assembly.
The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure
requirements, and should be avoided. While there may
be differences between the SAR levels of various
phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID APYHRO00047.
Additional information on Specific Absorption Rates
(SAR) can be found on the Cellular
Telecommunications & Internet Association (CTIA)
web-site at http://www.phonefacts.net.
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/
kg) averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for
any variations in measurements.
156 Index
Index
A
Alarms 98
B
Battery 11
Battery Level Indicator 14
C
Calculator 100
Calendar 93
Call Costs 140
Call Log 139
Call Settings 127
Auto Redial 133
Call Waiting 133
Minute Minder 133
My Phone Number 130
Restrict Calls 130
Time & Cost 130
Voicemail & Diverts 128
Call Timers 140
Camera 44
Adjusting the Exposure 45
Common Shortcut Keys 47
Continuous Shoot 48
Recording Video Clips 45
Selecting the Picture or Video
Quality 46
Selecting the Picture Size 48
Selecting the Recording
Time 50
Selecting the Shutter Sound 49
Switching between the Photo
and Video Camera
Modes 46
Taking Pictures 44
Characters 30
Changing the Input Mode 31
Using Templates 32
Connectivity 122
Bluetooth 122
Memory Card 126
Contacts List 34
Contact Groups 39
Manage Category 38
Memory Status 40
Selecting the Storage
Memory 35
Speed Dial List 40
Synchronising Contacts List
Entries with those on the
Internet 42
Viewing My Contact Details 36
Contacts Lock 121
Countdown Timer 105
D
Data Counter 140
E
E-Book 105
Emergency Calls 21
Expenses Memo 106
F
Function Lock 121
G
Games & Applications 84
Java™ Information 89
Setting Permission 85
Viewing Application
Information 86
H
Handset Code 121
Handset Lock 120
Index 157
I
In Call Menu (Video Call) 27
Changing the Image of
Yourself 27
Muting the Microphone 27
Swapping Images 27
Turning the Speaker On and
Off 28
Video Call Settings 28
In Call Menu (Voice Call) 23
Accessing SMS/MMS Menu
during a Call 24
Adjusting the Earpiece
Volume 23
Conference Call 24
Muting the Microphone 25
Putting a Call on Hold 23
Turning the Speaker On and
Off 23
International Calls 21
K
Keypad Lock 17
M
Master Reset 122
Messaging 51
Calling the Phone Number 56
Downloading 56
Email Settings 67
Forwarding 57
General Settings 64
Locking or Unlocking 57
MMS Settings 66
Sending a Message in the Drafts
Box 55
Sending a Voice Clip Message
or Video Clip Message 55
Sending with Postcard 58
SMS Settings 65
Storing the Phone Number 56
Using the Sending Options 54
Music & Ringtones 76
Music Player 72
Adding a File to the Playlist 74
Adding a New Playlist 72
Playing Back Sound Files 72
Sorting Files 74
My Items 75
N
Navigating Functions 20
Network Settings 133
Area Info 138
Cell Broadcasts 137
Flight Mode 134
Internet Settings 134
Selecting a Network 133
O
Organiser & Tools 98
Other Documents 78
P
PC Connection 142
Phone Help 107
Phone Settings 109
Date & Time 117
Language Setting 119
Locks 119
Profiles 109
Setting the Display 114
Sounds & Alerts 117
Pictures 75
PIN Code 120
PIN2 Code 120
Power On and Off 16
R
Redialling 22
S
Safety Precautions 147
Screensavers 88
Secret Data 121
158 Index
Settings 109
SIM Application 108
SIM Card 11
Speed Dialling 22
Stopwatch 102
T
Tasks 102
Text Templates 83
Themes 78
Troubleshooting 145
V
Videos 77, 90
Vodafone live! 68
Navigating a WAP Page 69
Vodafone Messenger 59
Adding a New Contact 61
Messenger Settings 67
Settings for Client 63
Starting a Conversation 60
Voice Recorder 101
W
World Clock 104
List of Menu Functions 159
List of Menu Functions
Menu No./Main Menu Menu No./Sub Menu1
1Entertainment
1Games & Applications
2Mobile TV
3Streaming
4Videos
2Vodafone live!
1Vodafone live!
2Enter URL
3Bookmarks
4Alert Inbox
5Saved Page
6Access History
7Browser Settings
8What’s New?
9Music
10 Games
11 Ringtones
12 Pictures
13 News
14 Sport
3Music
1Last Played Music/
Currently Playing
2My Music
3Browse Music Store
4Music Finder
4Camera
5Messaging
1Create Message
2Inbox
3Drafts
4Sent
5Outbox
6Vodafone Messenger
7Templ a tes
8Media Album
9Messaging Settings
10 Memory Status
6My Items
1Pictures
2Music & Ringtones
3Games
4Videos
5Applications
6Themes
7Text Te m pla t e s
8Other Documents
9Memory Status
Menu No./Main Menu Menu No./Sub Menu1
160 List of Menu Functions
7Organiser & Tools
1Alarms
2Calculator
3Voice Recorder
4Stopwatch
5Tasks
6World Clock
7Countdown Timer
8E-Book
9Expenses Memo
10 Phone Help
8Contacts
1Contacts List
2Call Voicemail
3Manage Category
4Speed Dial List
5My Contact Details
6Contact Groups
7Synchronise
8Settings
9Manage Contacts
10 Service Dialling No.*
9Call Log
1All Calls
2Dialled Numbers
3Missed Calls
4Received Calls
5Call Timers
6Data Counter
7Call Costs*
Menu No./Main Menu Menu No./Sub Menu1 Menu No./Main Menu Menu No./Sub Menu1
10 SIM Application
11 Calendar
12 Settings
(Tab 1: Phone Settings)
1Profiles
2Display
3Sounds & Alerts
4Date & Time
5Language
6Shortcuts
7Locks
8Master Reset
(Tab 2: Connectivity)
1Bluetooth
2Memory Card
(Tab 3: Call Settings)
1Video Call Settings
2Voicemail & Diverts
3Show My Number
4Time & Cost
5Restrict Calls
6Minute Minder
7Call Waiting
8Auto Redial
* Depends on SIM card contents
List of Menu Functions 161
Note for the menu indications for the Postcard, Media Album and other services
The menu indications for the Postcard, Media Album and other services vary in the United Kingdom and Ireland
and South Africa as follows:
12 Settings
(Tab 4: Network Settings)
1Select Service
2Select Network
3Flight Mode
4Internet Settings
5Cell Broadcasts
6Area Info
7Network Information
Menu No./Main Menu Menu No./Sub Menu1
Current indications in the user
guide Indications in United Kingdom Indications in Ireland South Africa
“Postcard” “live! Postcard” (Not available) (Not available)
“Additional Information” “Additional information” (Not available) (Not available)
“Street & Number” “Address” “Street & Number” “Street & Number”
“State/Province” “County” “State/Province” “State/Province”
“Postal Code” “Post Code” “Postal Code” “Postal Code”
“Media Album” “live! Studio” “Picture Album” “live! Studio”
“To Media Album” “To live! Studio” “To Picture Album” “To live! Studio”
“What’s New?” “New” “New” “What’s New?”

Navigation menu