Sharp HRO00065 Cellular Transceiver User Manual
Sharp Corporation Cellular Transceiver Users Manual
Sharp >
Contents
- 1. Users Manual
- 2. Manual BT Logo
Users Manual
Introduction 1
Introduction
Congratulations on your new Sharp SX862 phone.
About This User Guide
This user guide is carefully designed to help you learn about
your phone’s features and operations quickly and effectively.
NOTICE
• We strongly recommend that you keep separate permanent
written records of all important data. Data may be lost or
altered in virtually any electronic memory product under
certain circumstances. Therefore, we assume no
responsibility for data lost or otherwise rendered unusable,
whether as a result of improper use, repairs, defects, battery
replacement, use after the specified battery life has expired
or any other cause.
• We assume no responsibility, directly or indirectly, for
financial losses or claims from third parties resulting from
the use of this product and any of its functions, such as
stolen credit card numbers, the loss or alteration of stored
data, etc.
• All company and/or product names are trademarks and/or
registered trademarks of their respective holders.
• Screen layout may differ from that illustrated in this user
guide.
The information described in this user guide is subject to
change without notice.
• All the functions described in this user guide may not be
supported by all networks.
• We assume no responsibility for downloaded contents,
information, etc. from the network.
Intellectual Property Rights
According to copyright laws, the reproduction, alteration and
use of material which is protected by copyright (music,
pictures, etc.) is only permitted for personal or private use. If
the user is not in possession of more extensive copyright or has
not received the explicit permission from the copyright owner
to reproduce, alter or use a copy which has been made or
modified in this way, this is considered to be a violation of the
copyright laws and gives the copyright owner the right to claim
for damages. For this reason, avoid the illegal use of material
which is protected by copyright.
Windows is a registered trademark of Microsoft Corporation in
the United States and/or other countries.
2 Introduction
Powered by JBlend™ Copyright 1997-2008 Aplix
Corporation. All rights reserved.
JBlend and all JBlend-based trademarks and logos
are trademarks or registered trademarks of Aplix
Corporation in Japan and other countries.
Powered by Mascot Capsule®/Micro3D Edition™
Mascot Capsule® is a registered trademark of HI Corporation
©2002-2008 HI Corporation. All Rights Reserved.
Licensed by Inter Digital Technology Corporation under one or more of the
following United States Patents and/or their domestic or foreign
counterparts and other patents pending, including U.S. Patents:
4,675,863: 4,779,262: 4,785,450: 4,811,420: 5,228,056: 5,420,896:
5,799,010: 5,166,951: 5,179,571 & 5,345,467
T9 Text Input is covered by the Hong Kong Standard Patent No.
HK0940329 and HK1010924.
T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554;
Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1; and additional patents are pending
worldwide.
CP8 PATENT
microSD Logo is a trademark.
Bluetooth is a trademark of the Bluetooth SIG, Inc.
The Bluetooth word mark and logos are registered trademarks owned by
the Bluetooth SIG, Inc. and any use of such marks by Sharp is under
license. Other trademarks and trade names are those of their respective
owners.
Licensed by QUALCOMM Incorporated under one or more of the following
United States Patents and/or their counterparts in other nations ;
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501
5,506,865 5,109,390 5,511,073 5,228,054 5,535,239
5,267,261 5,544,196 5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420 5,416,797 5,659,569
5,710,784 5,778,338
Introduction 3
This product is licensed under the MPEG-4 Visual Patent Portfolio License for
the personal and non-commercial use of a consumer to (i) encode video in
compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii)
decode MPEG-4 Video that was encoded by a consumer engaged in a
personal and non-commercial activity and/or was obtained from a licensed
video provider. No license is granted or implied for any other use. Additional
information may be obtained from MPEG LA.
See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent Portfolio License
for encoding in compliance with the MPEG-4 Systems Standard, except that
an additional license and payment of royalties are necessary for encoding in
connection with (i) data stored or replicated in physical media which is paid
for on a title by title basis and/or (ii) data which is paid for on a title by title
basis and is transmitted to an end user for permanent storage and/or use.
Such additional license may be obtained from MPEG LA, LLC.
See http://www.mpegla.com for additional details.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
This product contains NetFront Browser and NetFront Messaging Client of
ACCESS CO.,LTD.
ACCESS and NetFront are trademarks or registered trademarks of ACCESS CO.,
LTD. in Japan and other countries.
NetFront Browser © Copyright 1996-2007 ACCESS CO., LTD.
NetFront Messaging Client © Copyright 2000-2007 ACCESS CO., LTD.
This software is based in part on the work of the Independent JPEG Group.
Microsoft® Word is a product name of Microsoft Corporation in the United
States.
Microsoft, PowerPoint and Microsoft Excel are registered trademarks of
Microsoft Corporation in the United States and/or other countries.
Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated.
This product employs Adobe®
Flash® Lite™ technology
developed by Adobe Systems
Incorporated.
Adobe® Flash® Lite™
Copyright © 2003-2007 Adobe
Systems Incorporated. All rights
reserved.
Adobe and Flash are either trademarks or registered trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
“Document Viewer” is powered by Picsel
Technologies.
Picsel, Picsel Powered, Picsel Cube Logo,
Picsel File Viewer and Picsel Document
Viewer are Trademarks or Registered Trademarks of the Picsel Group of
Companies.
CYCLOID is a registration-pending trademark of SHARP Corporation in
Hong Kong.
IrSimple™, IrSS™ and IrSimpleShot™ are trademarks of the Infrared
Data Association®.
4 Introduction
Useful Functions and Services
Your phone offers you the following features:
• Video Calling. You can talk while viewing images of each
other on respective screens.
• 3D and colour Java™ games. You can also download
various games and applications from SmarTone-Vodafone
via the mobile Internet.
• Cycloid position. You can rotate the display 90° clockwise for
viewing images in a 3.2-inch full wide VGA LCD.
• Advanced Super View (ASV) colour LCD main display with
images that are clearer and easier to view.
• A built-in digital camera with an auto focus function for
taking pictures and video clips.
• A message function for reading and creating SMS
messages.
• MMS (Multimedia Messaging Services) for sending picture,
sound and video messages to brighten someone’s day.
• Email for sending up to 300 KB and receiving mail with
attachments.
• A colour WAP/Web browser for accessing information on the
mobile Internet.
• Your own ringtones and ring video clips. You can use sound
or video clip files as a ringtone or ring video clip.
• A music player that can play back MP3, MPEG-4 and 3GPP
format sound files (supported codec of MPEG-4 or 3GPP are
AMR, AAC, AAC+, and AAC+e).
• Playback of downloaded sound and video clip files.
• A voice recorder function for recording and playing back
voice clips.
•A
Bluetooth
® wireless technology interface for establishing
contact and transmitting data with certain devices. You can
transmit pictures, sounds, and video clips to OBEX-enabled
phones.
• An infrared interface for data communication. You can
transmit pictures, sounds, and video clips to OBEX-enabled
phones.
• A schedule alarm for creating and sending schedule entries
with alarm settings.
• A microSD™ memory card slot that expands connectivity
with a PC using the memory card.
Contents 5
Contents
Introduction .............................................................. 1
List of Menu Functions ............................................ 7
Getting Started ......................................................... 9
Inserting/Removing the SIM/USIM Card and the
Battery ............................................................ 13
Charging the Battery ........................................ 14
Inserting/Removing the Memory Card ............... 15
Connecting the Handsfree Kit ........................... 16
Turning Your Phone On and Off ........................ 17
Cycloid Position ............................................... 18
Display Indicators (Main Display) ....................... 20
Display Indicators (External Display) .................. 22
Navigating Functions ............................................. 23
Voice Call/Video Calling Functions ........................ 24
Entering Characters ............................................... 32
Changing the Input Language ........................... 33
Changing the Input Method .............................. 33
Chinese User Dictionary ................................... 38
Using Templates .............................................. 41
Copying, Cutting and Pasting Text ..................... 41
Insert Phonebook Entries .................................. 41
Using the Menu .......................................................42
Main Menu ......................................................42
Shortcut Keys ...................................................42
Shortcuts .........................................................43
Call Manager ...........................................................44
Sending a Message from the Phonebook ...........46
Multimedia ..............................................................52
Camera ....................................................................58
Taking Pictures ................................................58
Recording Video Clips .......................................59
Common Functions in the Photo and Video
Camera Modes ................................................59
Functions in Photo Camera Mode ......................62
Functions in Video Camera Mode ......................66
Messages ................................................................67
SMS ................................................................67
MMS ...............................................................67
Email ...............................................................67
Area Info ..........................................................75
Browser ...................................................................80
Navigating a WAP or Web Page .........................81
6 Contents
Gallery .................................................................... 84
Games & Applications ............................................ 92
Organiser ................................................................ 97
SIM Application .................................................... 113
Settings ................................................................ 114
Call Log ................................................................. 139
Connectivity ......................................................... 141
Bluetooth ...................................................... 141
Infrared ......................................................... 144
Mass Storage ................................................ 145
USB Charge .................................................. 145
Card Settings ................................................ 145
Connecting SX862 to Your PC .............................. 147
System Requirements .................................... 147
3G/GSM Modem ............................................ 147
Handset Manager .......................................... 149
Music Manager ............................................. 150
Sync Manager ............................................... 152
Troubleshooting ................................................... 153
Safety Precautions and Conditions of Use .......... 155
Conditions of Use ........................................... 155
Mobile Light LED Properties ........................... 156
Environment .................................................. 158
Precautions Concerning Vehicle Use ................158
SAR ...............................................................159
FCC NOTICE ..................................................159
Out of Warranty List .............................................161
Index .....................................................................162
List of Menu Functions 7
List of Menu Functions
SX862 functions are listed below.
See relevant page for details of each function. The menu’s corresponding number is used for shortcuts. For details, see page 42.
1Games & Applications
1GSX™ & Java™
2Java™ Settings
3Java™
Information
p. 92
p. 94
p. 96
2Browser
1Homepage
2Go to URL
3Bookmarks
4Alert Inbox
5My Saved Page
6Access History
7Browser Settings
8www
9PLUS
10 News
11 Music
12 Games
13 Sports
14 Email
p. 80
p. 80
p. 80
p. 80
p. 80
p. 80
p. 82
–
–
–
–
–
–
–
3Organiser
(Tab 1: Tools 1)
1Calendar
2Alarms
3Tasks
4Calculator
5Expenses Memo
(Tab 2: Tools 2)
1Stopwatch
2Countdown Timer
3World Clock
4Hour Minder
(Tab 3: Tools 3)
1Document Viewer
2Text Templates
3Voice Recorder
4Phone Help
p. 97
p. 101
p. 103
p. 106
p. 107
p. 108
p. 109
p. 109
p. 110
p. 110
p. 111
p. 112
p. 112
4Messages
1Create Message
2Message
3Email
4Alert Inbox
5Voice Mail
6Cell Broadcasts
7Area Info
8Messaging
Settings
9Memory Status
p. 67
p. 71
p. 71
–
–
p. 74
p. 75
p. 75
–
5Camera p. 58
6Gallery
1Pictures
2Videos
3SD Video
4Music and Sounds
5Themes
6GSX™ & Java™
7Flash®
8Other Documents
9Memory Status
p. 84
p. 85
p. 85
p. 86
p. 86
p. 92
p. 87
p. 88
p. 91
7Multimedia
1FoneTV
2www
3Videos
4Music
p. 52
p. 52
p. 52
p. 55
8 List of Menu Functions
8Call Manager
1Phonebook
2Add New
3Call Voicemail
4Manage Groups
5My Card
6Speed Dial List
7Message Groups
8Phonebook
Settings
9Service Dialling
No.*
10 Advanced
p. 44
p. 44
–
p. 50
p. 44
p. 51
p. 47
p. 44
p. 46
p. 49
9Settings
(Tab 1: Phone Settings)
1Profiles
2Display Settings
3Themes
4Sound Settings
5Date & Time
6Language
7Display Rotation
8Switch ringtone
output
9Earpiece Volume
10 Change Menu
11 Security Settings
12 Master Reset
(Tab 2: Call/Video Call)
1Voicemail &
Diverts
2Video Calling
Settings
3
Show Your Number
4Restrict Calls
5Minute Minder
6Auto Answer
7Call Waiting
8Display Call Timer
9Display Call Cost
10 Auto Redial
p. 114
p. 115
p. 119
p. 119
p. 123
p. 124
p. 124
p. 124
–
p. 125
p. 125
p. 127
p. 127
p. 129
p. 131
p. 131
p. 134
p. 134
p. 134
p. 134
p. 135
p. 135
(Tab 3: Network Settings)
1Network Settings
2Off Line Mode
3Internet Settings
p. 135
p. 136
p. 136
10 SIM Application*
p. 113
11 Call Log
1All Calls
2Dialled Numbers
3Missed Calls
4Received Calls
5Call Timers
6Call Costs*
7Data Counter
p. 139
p. 139
p. 139
p. 139
p. 139
p. 140
p. 140
12 Connectivity
1Bluetooth
2Infrared
3Mass Storage
4USB Charge
5Card Settings
p. 141
p. 144
p. 145
p. 145
p. 145
*Depends on SIM/USIM card
contents.
Getting Started 9
Getting Started
1
13
18
19
14
17
15
16
20
2
5
6
3
4
7
8
9
10
11
12
22
24
25
26
23
21
29
30
31
28
27
10 Getting Started
1. Earpiece
2. Light Sensor
3. Main Display
4. Speaker
5. Navigation Keys (Arrow Keys): abcd
Moves cursor to highlight a menu item, etc.
Up arrow key (a) displays the Bookmarks when pressed
in standby.
Down arrow key (b) displays the Phonebook entries when
pressed in standby.
Left arrow key (c) displays the list of GSX™ & Java™
when pressed in standby.
Right arrow key (d) displays Gallery when pressed in
standby.
6. Centre Key: B
Displays Main menu in standby, and executes functions.
Long press in standby to initiate video camera.
7. Left Soft Key: A
Executes the function in the lower left of the screen.
Displays Message menu in standby.
8. Send/Redial Key: D
Makes voice calls or accepts calls, and displays the call
logs in standby.
9. Shortcut Key: E
Displays Shortcut menu.
10.Voicemail Key: G
Long press to connect to the Voicemail centre. (Depending
on the SIM/USIM card.)
11.* /Shift Key: P
Switches character input method as follows on the text
entry screen.
In English mode: Abc, ABC, abc and 123. In T9 mode, T9
Abc, T9 ABC, T9 abc and 123.
In Traditional Chinese mode: Abc, ABC, abc, 123, and T9
Stroke
In Simplified Chinese mode: Abc, ABC, abc, 123, T9
PinYin, and T9 Stroke
Press to enter P, ? or * in standby.
Long press in standby to lock the keypad.
12.Multiple Functions Key: S
Press in standby to switch Profiles settings.
Long press in standby to switch Profiles settings between
the mode most recently activated and Silent mode.
Switches displays when multiple applications are
launched.
Getting Started 11
13.Right Soft Key: C
Executes the function in the lower right of the screen.
Accesses “SmarTone
iN!
” by opening the browser in
standby.
14.End/Power Key: F
Ends a call and turns power on/off.
15.Clear/Back Key: U
Clears the characters before the cursor, returns to the
previous screen, etc.
16.Multimedia Key: T
Displays Multimedia menu.
17.Keypad
18.#/Silent Key: R
Displays symbol screen on the text entry screen.
Long press to switch languages on the text entry screen.
Long press in standby to switch Profiles settings between
the mode most recently activated and Silent mode.
19.Microphone
20.External Connector:
Used to connect either the charger or a USB data cable.
21.Sub Display
22.Small Light:
Flashes when an incoming call or a new message is
received or missed, if Event Light (p. 114) or Status Light
(p. 115) is enabled.
23.Built-in Aerial:
Warning: Do not cover the top of the phone with your hand
when in use as this may interfere with the performance of
the built-in aerial.
24.microSD Card Slot
25.Side Keys: VW
Press in standby or during a call to increase or decrease
the earpiece volume.
Press while listening to music (or video) to increase or
decrease the earpiece volume.
26.Camera Key: X
Long press in standby to activate the camera.
Takes a picture or starts recording video when the camera
is active.
Press when the phone is closed to turn on the sub display.
Long press when the phone is closed to turn on the Small
Light.
27.Mobile Light:
Used as a flash in camera mode or as an auxiliary light.
12 Getting Started
28.Battery Cover
29.Camera
30.Handsfree Kit/Microphone Connector
31.Infrared Port:
Sends and receives data via infrared.
Getting Started 13
Inserting/Removing the SIM/USIM Card and
the Battery
1. Slide off the battery cover ( ).
2. Slide the SIM/USIM card into the SIM/USIM holder .
3. Hold the battery so that the metal contacts of the battery
are facing down, slide the guides on the top of the
battery into the battery slots , and then insert it .
4. Replace the battery cover.
Note
•Make sure that only 3V SIM/USIM cards are used.
•Make sure that the standard accessory battery is used.
Battery Disposal
The device is battery-powered. In order to protect the
environment, please read the following points concerning
battery disposal:
• Take the used battery to your local waste depot, dealer or
customer service centre for recycling.
• Do not expose the used battery to a naked flame, immerse
in water or dispose with the household waste.
1
2
3
SIM/USIM card
4
5
14 Getting Started
Charging the Battery
You must charge the battery for at least 150 minutes before
using your phone for the first time.
Using the Charger
1. Open the cover of the external connector, and connect
the charger horizontally to the external socket located at
the bottom of the phone until it clicks.
2. Connect the charger to an AC outlet.
When the phone is charging, the battery status icon ( )
displays the current status. The Small Light also lights up.
Standard charging time: Approx. 150 minutes
Note
•Charging time may vary depending on the state of the battery
and other conditions. (See “Battery” on page 156.)
To Disconnect the Charger
When charging is completed, the battery indicator icon displays
the full charge status. The Small Light also turns off when
completed.
1. Unplug the charger from the AC outlet.
2. Push and hold the side buttons of the charger , then
disconnect the charger from the external socket of the
phone .
3. Close the cover.
Note
•Do not use any non-approved chargers as they may damage
your phone and invalidate any warranties, see “Battery” on
page 156 for details.
•Forcibly disconnecting the charger may cause malfunction.
Getting Started 15
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power for
charging from the cigarette lighter socket of a car.
Battery Level Indicator
The current battery level is displayed in the upper right of the
main and external displays.
Low Battery during Use
When the battery is running low, an alarm will sound and “ ”
or “ ” is displayed on the main and external displays
respectively.
If you are using your phone and you hear the low battery alarm,
attach your charger as soon as possible. The phone may not be
able to continue normal operation if you continue to use it.
Inserting/Removing the Memory Card
Note
•Make sure that the phone is turned off before inserting/
removing the memory card.
•Be sure to insert the card in the correct direction and
orientation.
•Keep all memory cards out of the reach of small children.
1. Turn off the phone.
2. Open the microSD card slot cover.
Battery Indicators Charge Level
Sufficiently charged
Charging recommended
Charging required
Empty
16 Getting Started
3. Insert the memory card until it clicks. (To remove the
memory card, push the memory card until it clicks.)
4. Close the cover.
Tip
•You see the following indicators when the memory card is in
use:
: Appears when the card is inserted.
: Appears when the card is damaged or unusable. Make
sure the card is properly inserted.
: Appears when the card is being written to or read.
: Appears when the card is being formatted.
Connecting the Handsfree Kit
1. Open the connector cover.
2. Connect the handsfree kit.
Getting Started 17
Turning Your Phone On and Off
To turn the power on or off, long press F for approximately 2
seconds.
To Enter the PIN Code
If the PIN (Personal Identification Number) code is enabled you
are asked to enter the PIN code each time the phone is
switched on. For details on setting the PIN code, see “Enabling/
Disabling the PIN Code” on page 125.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press B.
Note
•If your PIN code is entered incorrectly three times in a row,
the SIM/USIM card is locked. See “Enabling/Disabling the
PIN Code” on page 125.
•If the clock settings have not been entered, the date and time
entry screen is displayed (p. 123).
To Copy All Phonebook Entries from the SIM/USIM Card
When you insert the SIM/USIM card into your phone for the first
time and start the Phonebook application, you are asked
whether you wish to copy Phonebook entries on the SIM/USIM
card. Follow the on-screen instructions, or you can do it later
using the Phonebook menu as follows:
“Call Manager”
→
“Advanced”
→
“Copy All Entries”
1. Select “From SIM to Handset”.
18 Getting Started
Cycloid Position
You can rotate the display 90° clockwise to view images in
landscape orientation.
Rotating the Display
1. Open the phone into portrait position as illustrated.
2. Turn the display 90° clockwise.
Note
•Do not turn the display anticlockwise as this may damage the
phone.
•Do not carry the phone in the cycloid position as this may
damage the display.
Getting Started 19
Assigning a Function
You can assign a function to activate automatically when the
display is rotated to the cycloid position in standby.
When the display is rotated for the first time, the “Rotate 90°
to” screen is displayed.
Select a function to assign from the following items:
• Show Multimedia Menu
• Open Received Msg
• Activate Camera/Video
• Show Main Menu
• Off (Standby)
Note
•You can change the assigned function by pressing [Rotate
90° to] on the screen, or from the Display Rotation menu
(p. 124).
•Some functions remain active even if the display is rotated
from the portrait position while a function is active.
20 Getting Started
Display Indicators (Main Display) 1. / : Strength of received signal/Service out of
range
: HSDPA
: EDGE
: 3G (UMTS)/GPRS
: GPRS enabled
: Roaming outside network
2. / : Connection to the server [established/
communicating]
3. / : Voice call [incoming/in progress]
4. / / : Video calling communication mode enabled
[voice/video/voice and video]
5. / : Alerts [text message and multimedia
message/Email]
6. / / /#:
Mailbox full [SIM/USIM card only/handset
only/both SIM/USIM card and handset/Email
only]
7. : “Voice Calls” diverts set to “Always”
Right soft keyCentre keyLeft soft key
Indicator area
Getting Started 21
8. ///////:
Connection status
[USB cable [standby/exchanging
information]/IrDA setting [standby/
exchanging information]/
Bluetooth
wireless
setting [standby/exchanging information/
talking with the
Bluetooth
headset/Hide my
phone]]
9. / / : Java™ application [executed (colour)/
suspended (grey)]/Music
10. : Secure WAP/Web page displayed
11. / / : Silent/vibration setting [silent/vibration
enabled/silent and vibration enabled]
12. / / : Speaker mode [speaker phone/speaker
activated/microphone muted]
13. : Memory card inserted
14. / : Battery level [normal position/cycloid
position]
15. : Daily alarm enabled
16. / : Schedule entry enabled [with/without
reminder alarm]
17. : Outbox contains unsent messages [text
message/multimedia/Email]
18. / / : WAP/OTA provisioning alerts [WAP alert/OTA
provisioning alert/WAP and OTA provisioning
alerts]
19. : Voicemail message alert
20. : “Show Secret Data” set to “On”
21. : Function Lock enabled
22. : Keypad Lock enabled
23.(No display)///:
Current profile [Normal/Car/Silent/Original]
24. : Hour minder enabled
25. : Auto answer enabled
22 Getting Started
Display Indicators (External Display)
Status Indicators
1. ///:
Battery level [sufficiently charged/charging
recommended/charging required/empty]
2. : Clock
3. / : Strength of received signal/Service out of
range
4. / : Missed events
5. : Voice call incoming
6. : Video call incoming
7. : Call in progress
8. / : Alerts [messages/Delivery Report]
9. / / :
Alarm enabled [Daily alarm/Schedule alarm/
Task alarm]
10. : Sound file being played
11. : Streaming
12. : Stopwatch/countdown timer
13. : OBEX data incoming
14. : Voice Recorder activated
Navigating Functions 23
Navigating Functions
All applications are accessed from the Main menu. To open the
Main menu, press the centre key B in standby.
To launch applications, you will need to highlight menu items,
and make selections. To select a menu item (indicated in
quotation marks), move the cursor using a, b, c and d,
and press B to select.
In certain procedures, you will need to press one of the soft
keys (indicated in square brackets), which are displayed in the
lower left and right of the screen. Press the corresponding soft
key (A or C).
To return to the previous screen, press the right soft key if it
displays
Back
. To close the Main menu, press the right soft key
if it displays
Back
.
Each section in this user guide starts with a list of items you will
need to select in order (indicated in italics) before performing
the procedures shown. Select each item to reveal the next set
of items that you have to choose from. Open subsection items
after opening those listed in the main section.
Example:
“Games & Applications”
→
“Java™ Settings”
The following menus have tabs - Organiser and Settings.
You can select the desired tab with the c/d key, and after
that you can select the item you wish to set in the selected tab
with the a/b key.
Example:
“Settings”
→
“Call/Video Call” tab
→
“Video Calling
Settings”
24 Voice Call/Video Calling Functions
Voice Call/Video Calling Functions
Making a Voice Call
1. Enter the area code and the phone number you wish to
dial, and then press D to dial.
If you enter the wrong number, press U to delete the
number to the left of the cursor.
Emergency Calls
1. Enter 999 or 911 (international emergency number)
using the keypad and press D to dial.
Note
•Emergency calls may not be able to be made on all mobile
phone networks when certain network services and/or
phone features are in use. Contact your service provider for
more information.
•This emergency number can normally be used to make an
emergency call in any country, with or without a SIM/USIM
card inserted, if a 3G (UMTS)/GSM network is within range.
International Calls
1. Long press Q until a + (international dialling prefix)
sign is displayed.
2. Enter the country code, followed by the area code
(without the leading zero) and the phone number, and
press D to dial.
Adding an Entered Phone Number to the Phonebook
1. After entering a phone number, press [Options] and
select “Save Number”.
For details on creating a new entry, see “Adding a New
Entry” on page 44.
Showing or Hiding My Phone Number on the Display of
the Called Party
1. After entering a phone number, press [Options], select
“Show My ID” or “Hide My ID” and press D to dial.
Voice Call/Video Calling Functions 25
Speed Dialling
Up to 8 phone numbers from the Phonebook memory (Handset
and SIM/USIM) can be assigned to speed dials. You can call the
numbers using the digit keys (G to O). The phone
number of the Voicemail centre is assigned to G.
For details on setting the speed dial list, see “Speed Dial List”
on page 51.
1. To dial a number using the speed dial, long press any of
the digit keys (G to O).
The phone number saved in the speed dial list is dialled.
Redialling
You can redial numbers in the call log. Select from specific
categories or “All Calls”. Specific categories contain up to 30
numbers and the “All Calls” list contains up to 90.
1. Press D in standby.
2. Select the category from “All Calls”, “Dialled Numbers”,
“Missed Calls” or “Received Calls”.
To switch logs, press c or d.
3. Highlight the phone number you wish to call.
4. Press D to redial a voice call or long press D to redial
a video calling.
Answering a Voice Call
When an incoming call is detected, the phone rings.
1. Press D or B to answer the call.
Or press any key except F, U, S, [Options] or [Busy]
when the “Any Key Answer” function is enabled. Set the
Any Key Answer function in the profile of each mode
(p. 115).
Tip
•If you have subscribed to the Calling Line Identification (CLI)
service and the caller’s network sends the number, the
caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Phonebook, the caller’s
name is displayed on the screen.
•If the number is a restricted number, the display shows
“Withheld”.
•When you receive a call from the person whose picture is
registered in the Phonebook, the picture and name are
displayed.
26 Voice Call/Video Calling Functions
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you do
not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy
tone to the caller.
In Call Menu (Voice Call)
Your phone has additional functions available while a call is in
progress.
Adjusting the Earpiece Volume
You can adjust the earpiece volume (and handsfree kit volume,
if connected) to five levels.
1. Press V or W to display the Earpiece Volume screen.
2. Press V (or a/d) to increase the volume of the call or
press W (or b/c) to decrease the volume.
3. Press B when the volume is set to the desired level.
Turning the Speaker On and Off
You can talk via the loudspeaker on the phone when it is on.
1. During a call, press B.
Putting a Call on Hold
This function allows you to manage two calls at the same time.
If you wish to make another call while you are talking to
someone, you can put the current call on hold to call someone
else.
To Make Another Call during a Call
1. During a call, press [Options] and select “Hold”.
The current call is put on hold.
2. Press [Options] and select “Dial New Number”.
3. Enter the phone number you wish to make another call
to, then press D.
Tip
•You can also make another call by entering the phone
number during a call instead of step 1. The current call is
automatically put on hold.
Voice Call/Video Calling Functions 27
Accessing SMS/MMS Menu during a Call
1. During a call, press [Options] and select “Messaging”.
The following options are available: “Create Message” to
make an SMS and MMS, or “Inbox”, “Sent” or “Drafts” to
access these folders. For details on SMS and MMS, see
“SMS” and “MMS” on page 67.
Call Waiting
This service notifies you of another incoming call while you
have a call in progress.
1. During a call, press [Options] and select “Hold &
Answer” to answer the second call.
The first call is put on hold and you can now talk to the
second caller.
You can also answer the second call by pressing D.
Note
•You need to set “Call Waiting” to “On” if you wish to use the
Call Waiting service (p. 134).
•Call Waiting service may not be available on all networks.
Contact your service provider for more information.
•If you do not wish to answer the second call, press [Options]
and select “Busy” in step 1. If “Reject” is selected, the log of
the second call is saved as a missed call.
Conference Call
Conference call is a call with more than 2 participants. You may
include up to 5 participants in a conference call.
To Make a Conference Call
You must have one active call and one held call.
1. During a call, press [Options] and select “Conference
All” to join the conference call.
2. Press F to end the conference call.
Note
•The conference call service may not be available on all
networks. Contact your service provider for more
information.
•To end the call with all participants, press [Options] and
select “End All Call(s)”.
•To reject adding more participants to the current party, press
[Options] and select “Reject”, or you can send the busy tone
by selecting “Busy”.
•You have more options for the Conference call after selecting
“Conference All” in step 1:
•To put all participants on hold, select “Hold All”.
•To put all participants except the current call on hold,
select “Private”.
28 Voice Call/Video Calling Functions
To Add New Participants to the Conference Call
1. Press [Options] and select “Dial New Number”.
2. Enter the number you wish to include in the conference
call and press D to dial.
3. Press [Options] and select “Conference All” to join the
conference call.
If you wish to add other participants, repeat steps 1 to 3.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that you
wish to disconnect from the conference call.
2. Press [Options] and select “End This Call”.
To Have a Private Conversation with One of the Participants
If you wish to have a private conversation with one of the
participants, you may select the participant from the
conference list and put the other participants on hold.
1. During a conference call, select the person that you wish
to talk to.
2. Press [Options] and select “Private”.
3. Once you have finished the private conversation, press
[Options] and select “Conference All” to return to the
conference call.
Muting the Microphone
1. During a call, press [Mute].
To use the microphone again, press [Unmute].
Voice Call/Video Calling Functions 29
Making a Video Calling
Note
•Video callings can only be made and received if both parties
have 3G capable phones and 3G coverage. See “Display
Indicators (Main Display)” on page 20.
•Make sure that the battery is fully charged and the signal is
strong before using this function.
•Turn the loudspeaker on or use a handsfree kit so that you
can talk while looking at the video calling screen on the
display.
•Use the camera to send live video images.
Making a Video Calling
To Make a Video Calling by Entering the Phone Number First
1. Enter the area code and the phone number you wish to
dial, and then long press D to dial.
If you enter the wrong number, press U to delete the
number to the left of the cursor.
When connected, the image of the called party is displayed
in the upper part of the screen and yours in the lower left.
Tip
•If the called party’s phone is not video calling enabled, you
can press F and enter the phone number again to make a
voice call.
Answering a Video Calling
When an incoming call is detected, the phone rings.
1. Press D to answer the call with video, or press B or
[Options] and select “Camera Off” to answer with voice
only.
Tip
•If you have subscribed to the Calling Line Identification (CLI)
service and the caller’s network sends the number, the
caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Phonebook, the caller’s
name is displayed on the screen.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you do
not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy
tone to the caller of an incoming call letting them know
that you cannot answer the call.
30 Voice Call/Video Calling Functions
In Call Menu (Video Calling)
Muting the Microphone
1. During a video calling, press [Mute].
To use the microphone again, press [Unmute].
Swapping Images
You can swap images between the main and sub screens.
1. During a video calling, press [Options] and select
“Switch Images”.
2. Select “Priority to Incoming”, “Priority to Outgoing”,
“Incoming” or “Outgoing”.
Changing the Outgoing Image
During a video calling, you can switch the image shown to the
caller between the camera image and an alternative image.
1. During a video calling, press [Options] and select
“Camera Picture”.
2. Select “External Camera” or “Alternative Image”.
“External Camera”: The image through the camera
is displayed and sent to the
receiver.
“Alternative Image”: The camera is turned off and the
image selected in “Alternative
Image” of “Video Calling
Settings” (p. 129) is used.
Turning the Speaker On and Off
You can talk via the loudspeaker on the phone when it is on.
1. During a video calling, press [Options] and select
“Loudspeaker On”.
Note
•In a high-noise environment, you may not be able to
continue a call or make a clear call. We recommend that you
use the handsfree kit.
•With this option, there may be interruption if you increase the
earpiece volume. We recommend that you decrease the
earpiece volume or use the handsfree kit.
Voice Call/Video Calling Functions 31
Video Calling Settings
To Adjust the Quality of the Incoming or Outgoing Image
You can adjust the quality of the called party’s or caller’s
image.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Incoming Picture Quality” or “Outgoing Picture
Quality”.
3. Select “Normal”, “Quality Priority” or “Frame Rate
Priority”.
“Normal”: The standard quality is used.
“Quality Priority”: The quality of the picture takes
precedence over the frame rate.
“
Frame Rate Priority
”: The frame rate takes
precedence over the quality.
To Turn the Backlight On or Off
You can turn on the backlight of your screen.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Backlight”.
3. Select “Always On”, “Always Off” or “As Normal
Setting”.
When “Always On” is selected, the backlight will always be
on during a video calling.
When “As Normal Setting” is selected, the backlight will
time out depending on the Backlight setting (p. 118).
To Adjust the Video Exposure
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Exposure”.
3. Press a (Light) or b (Dark).
32 Entering Characters
Entering Characters
When entering characters to create Phonebook entries, text
messages or multimedia messages, etc., press the
corresponding keys.
In multi-tap input method, press each key until the desired
character is displayed. For example, press H once for the
letter A or twice for the letter B.
Press the following keys to:
Long press the following keys to:
G:Enter:
. (full-stop) , (comma) ? ! : ; ' (apostrophe) " / 1
Q:Enter:
(space)+ = < > € £ $ ¥ % & 0
P: Switch character case among four modes:
Abc, ABC, abc and 123.
R: Enter other characters.
G-O: Enter 1-9 numbers.
Q: Enter space in Numeric mode or to enter 0 in
other modes.
P: Shift between multi-tap and T9 mode.
R: Display the language options screen.
Entering Characters 33
Changing the Input Language
1. On the text entry screen, press [Options] and select
“Input Language”.
2. Select the desired language.
Changing the Input Method
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the input method you wish to use.
Tip
•In T9 or multi-tap mode, you can switch input mode as
follows by pressing P.
English/T9 mode
English/Multi-tap mode
Traditional Chinese/T9 mode
Input Method Input Language
= English
Input Language
= Traditional
Chinese
Input Language
= Simplified
Chinese
T9 Mode
T9 Abc
T9 ABC
T9 abc
T9 Stroke T9 PinYin
T9 Stroke
Multi-tap mode
Abc
ABC
abc
Numeric
Abc
ABC
abc
Numeric
Abc
ABC
abc
Numeric
34 Entering Characters
Simplified Chinese/T9 mode
T9 English Mode
Using T9 English Mode
T9 text input method is a shortcut to enter text easily and
quickly.
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the T9 mode (T9 Abc, T9 ABC, T9 abc) you wish
to change. “ ” is displayed on the main display.
4. Press the keys to enter characters.
5. Press a or b to select the word you wish to input.
6. If you wish to clear the word, highlight it and long press
U.
7. Press ,
B or press [Options] and select “Done” to
complete the selection.
Tip
•If you press Q instead of step 6, a space is inserted next
to the selected word.
User Dictionary
You can create your own English words for T9 Alphabet text
input.
Note
•This function is only available when “Input Language” is set
to “English”.
1. On the text entry screen in T9 mode, press [Options] and
select “User Dictionary”.
2. Select “Add New Word” and enter a new word.
To Edit a Word in the List
1. On the text entry screen in T9 mode, press [Options] and
select “User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the word.
Entering Characters 35
T9 PinYin and T9 Stroke Mode
In T9 PinYin and T9 Stroke mode, keys are as follows.
T9 PinYin and T9 Stroke Mode keys
G-O: Long press to input corresponding Chinese
character displayed in the candidate field.
P: Long press to enter tones “ ” in
T9 PinYin mode.
R: Long press to display the Input Language
screen.
Changing the Input Method between Stroke and PinYin
See
“Changing the Input Method” on page 33
.
Key Stroke PinYin
G
Habc
Idef
Jghi
Kjkl
LWildcard mno
Mpqrs
Ntuv
Owxyz
PChange Input Method
QSpace
R
Go to the FullWidth Symbols screen.
36 Entering Characters
Using Stroke Mode (Traditional)
The following is an example of entering “ ”.
1. Change the input mode to T9
Stroke mode.
2. Press IGJ to display
the corresponding stroke for
“”.
3. Long press the corresponding key
to complete the selection (in this
case, M).
Note
•Each Traditional/Simplified Chinese mode has own T9
Stroke mode. The screen examples in steps 1 to 3 are
displayed when you select “Traditional Chinese” in the Input
Language option.
Using PinYin Mode
The following is an example of entering “ ”.
1. Press K for the first letter of the reading, then
highlight “l”.
Long press the
corresponding numeric key
to select the desired
character directly from the
Candidate field.
Candidate field
Input field
Entering Characters 37
2. Press J for the vowel of the first letter, then highlight
“li”.
Characters with the same reading are displayed in the
Candidate field.
3. Select the desired character.
4. Long press corresponding numeric key to enter the
desired character (in this case, H).
Tip
• When the cursor is placed after the first character, the
Candidate field displays characters most likely to follow.
• If you want to use tone options, long
press P instead of step 3 to
display the desired character.
The tone symbols are displayed in
the Candidate field.
Press the corresponding numeric
key (H).
38 Entering Characters
Chinese User Dictionary
You can create your own word list for T9 Chinese input.
You can enter Chinese characters, alphabet, symbols and
numbers. Only capital letters can be used for acronyms.
Note
•This function is only available when “Input Language” is set
to “Traditional Chinese” or “Simplified Chinese”.
Creating a New Entry
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Select “Add New Word”.
3. Enter new word.
4. Enter acronym.
Editing a Word in the List
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the entry word.
5. Modify the acronym.
Deleting a Word
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Delete”.
4. Press [Yes] or [No].
Entering Characters 39
To Call the Entry
Examples of entry words and acronyms:
The illustration below assumes that the example entry words
and acronyms are already stored.
1. Press M and highlight “S”.
If you long press G, “ ” will
be entered.
You can also select the other
words starting with the same
acronym by pressing b.
2. Press H and highlight “SB”.
If you long press G, “ ”
will be entered.
Note
•Acronyms are available for T9 PinYin mode only.
•You can also enjoy word completion or predictive input of the
words stored in the Chinese User Dictionary.
When the first three characters of a word are entered, the
whole word appears at once.
The following is an example of predictive input and word
completion. This example uses words stored in the last section.
1. Press H, K, I and long
press H to enter “ ”.
2. The character “ ” appears at
.
(Candidates and are taken
from the Chinese User
Dictionary.)
This example is using
T9 PinYin mode
Press b
This example is using
Stroke input method
for Simplified
40 Entering Characters
3. Long press N to enter “ ”.
4. Long press O to enter “ ”.
The sentence is completed
automatically.
Note
•Word completion does not take place if the entry word has
less than four Chinese characters.
•Predictive characters from the Chinese User Dictionary
appear at , so you only have to press O to enter the
characters.
If there are entry words which start with the same characters
such as “ ” and “ ”, candidates “ ” and “ ”
appear at or , depending on the sequence in which the
words are saved.
Symbols and Punctuations
1. On the text entry screen, press [Options].
2. Select “Add Symbol”.
The first symbol page is displayed.
In Chinese input mode, the FullWidth Symbols screen is
displayed.
3. Press a or b to switch pages (HalfWidth Symbol and
FullWidth Symbol pages), or use the numeric keys G
or H.
Tip
•R is a shortcut to launch Symbol Tables.
Entering Characters 41
Using Templates
You can use the phrases registered in Text Templates when
entering characters.
For details on creating the text template, see “Adding Phrases
to Text Templates” on page 111.
1. On the text entry screen, move the cursor to the point
you wish to insert the template.
2. Press [Options] and select “Advanced”.
3. Select “Insert Template”.
4. Select the desired text template.
Copying, Cutting and Pasting Text
1. On the text entry screen, press [Options] and select
“Advanced”.
2. Select “Copy” or “Cut”.
3. Move the cursor to the first letter to be copied or to be
cut, then press B.
4. Move the cursor to the last letter to highlight the area,
then press B.
5. Move the cursor to the point you wish to paste the
letters.
6. Press [Options] and select “Advanced”.
7. Select “Paste”.
Insert Phonebook Entries
You can insert the entries registered in Phonebook when
entering characters.
For details on creating the Phonebook entries, see “Call
Manager” on page 44.
1. On the text entry screen, move the cursor to the point
you wish to insert the Phonebook Entry.
2. Press [Options] and select “Advanced”.
3. Select “Insert Phonebook Entry”.
4. Select the desired Phonebook Entry.
The selected entry is inserted.
42 Using the Menu
Using the Menu
Main Menu
1. Press B in standby.
The Main menu is displayed.
2. Press a, b, c or d to highlight the desired menu,
then press B to access the function.
To select a menu item in the cycloid position, move the
cursor using c or d.
For details on the menu options, see “List of Menu
Functions” on page 7.
Shortcut Keys
You can access menus by pressing B and digit keys for the
corresponding number on the Main menu. For numbers 10 to
12, press B and P (10), Q (11) or R (12). For menus
with tabs, press d (or c when necessary) to select the
desired tab before pressing the digit keys. See “List of Menu
Functions” on page 7.
Shortcuts are listed in the headings of this user guide.
Example (p. 136): To Access “Off Line Mode” Sub Menu
Off Line Mode
“Settings”
→
“Network Settings” tab
→
“Off Line
Mode”
Press BO and d twice for the “Network Settings” tab,
then press H.
Example (p. 50): To Access “Manage Groups” Sub Menu
Manage Groups
Press BNJ.
Note
•The shortcut keys work for the first three menu levels only.
(M 9-d-d-2)
(M 8-4)
Using the Menu 43
Shortcuts
Your phone has a shortcut function (press E in standby)
which enables you to access the desired menu quickly. The
default shortcuts are as follows (shortcuts assigned to G-
O can be customised):
•Main Menu
• Enter Number
•G:Inbox
•H: Create Message
•I: Bookmarks
•J: Calendar
•K: Phonebook
•L:Gallery
•M:Calculator
•N:Alarms
•O:Bluetooth
To Use the Shortcut Key
1. Press E in standby.
2. Select the desired item or number.
To Customise the Assigned Shortcuts
1. Press E in standby.
2. Highlight the shortcut you wish to customise from
G-O.
3. Press [Options] and select “Assign”.
The list of the available items is displayed.
4. Select the desired item.
Note
•To move the item in the list that appears in step 1, highlight
the item, press [Options] and select “Move”. Then press a
or b to the desired location and press B.
•To reset the customised shortcut, press [Options] and select
“Set to Default” in step 2.
44 Call Manager
Call Manager
You can store the phone numbers and Email addresses of your
friends, family and colleagues in the Phonebook.
Your phone can store up to 750 entries. For each entry, you can
enter information including up to 5 phone numbers and 5 Email
addresses. There is a limit to the number of characters that can
be entered for each item. The character limit differs for the
handset memory and SIM/USIM card memory.
Adding a New Entry
The amount of phone numbers that you can store to the SIM/
USIM card is dependent on its capacity. Contact your service
provider for details.
Selecting the Storage Memory
You can choose either the phone or SIM/USIM card memory
locations to store the new entry.
“Call Manager”
→
“Phonebook Settings”
→
“Save to”
1. Select from “Handset”, “SIM” or “Choice”.
Tip
•“Choice” prompts you to choose the memory every time you
save a new entry.
Registering a New Entry
“Call Manager”
→
“Add New”
If you select the “Choice” option for the memory to be used, the
selection is between “To Handset” and “To SIM”.
1. Select the field you wish to fill in, and enter the relevant
information.
2. Press [Save] when finished.
Tip
•To create an entry, at least one field must be filled (“Last
Name”, “First Name”, “Add Phone Number” or “Add Email
Address” for the handset memory; “Name”, “Add Phone
Number” or “Add Email Address” for the USIM memory;
“Name” or “Add Phone Number” for the SIM memory).
Saving an Unregistered Number
After the call ends, you can have the confirmation screen
asking you if you wish to register the number to the Phonebook.
“Call Manager”
→
“Phonebook Settings”
→
“Save
Unregistered”
1. Select “Incoming Call” or “Outgoing Call”.
2. Select “On” or “Off”.
Registering My Card
You can register and edit your own contact as with other
Phonebook entries.
“Call Manager”
→
“My Card”
(M 8)
(M 8-8-3)
(M 8-2)
(M 8-8-5)
(M 8-5)
Call Manager 45
Searching for an Entry
You can search for the desired entry by entering the first few
letters of the name or by sorting the entries.
Changing the List Displayed
“Call Manager”
→
“Phonebook Settings”
→
“Source”
1. Select from “Handset”, “SIM” or “Both”.
Finding a Name
“Call Manager”
→
“Phonebook”
1. Enter the first few letters of the name.
The first name corresponding to the entered letters is
highlighted.
Tip
•You can select the Phonebook location from “Handset”,
“SIM” or “Both” before searching.
Sorting the Phonebook List Order
You can change the listing order of the Phonebook entries to
pinyin order or by different groups.
“Call Manager”
→
“Phonebook Settings”
→
“View
Phonebook”
1. Select “By PinYin” or “By Group”.
Selecting the Search Mode
“Call Manager”
→
“Phonebook Settings”
→
“Search
Mode”
1. Select “Character Search”, “PinYin Search” or “English
Search”.
(M 8-8-2)
(M 8-8-1)
(M 8-8-4)
46 Call Manager
Dialling from the Phonebook
“Call Manager”
→
“Phonebook”
1. Highlight the desired entry and press D (voice call) or
long press D (video calling).
Tip
•If more than one phone number is registered for the entry,
highlight the desired phone number after step 1 and press
D (voice call) or long press D (video calling).
•You can also dial from the details screen of the Phonebook.
On the details screen, select the desired phone number and
press D (voice call) or long press D (video calling).
Dialling a Service Phone Number
Certain SIM/USIM cards contain service phone numbers that
can be dialled. Contact your SIM/USIM card vendor for more
information. On the Phonebook screen, “Service Dialling No.”
is displayed at the bottom of the list.
“Call Manager”
→
“Service Dialling No.”
1. Select the desired service phone number.
Tip
•If the SIM/USIM card contains only one service phone
number, you can dial it in step 1 by pressing B.
•If no service phone number is stored in the SIM/USIM card,
this menu cannot be selected.
Sending a Message from the Phonebook
“Call Manager”
→
“Phonebook”
1. Select the desired entry including the phone number or
Email address you wish to use.
2. Select the desired phone number or Email address.
3. When a phone number is selected in step 2, select
“Create Message”.
For further procedures, see “Creating a New Message” on
page 67.
(M 8-9)
Call Manager 47
Using Mailing Lists
You can create a mailing list to send the same message to a
group of recipients at once. Up to 20 groups can be registered.
To Create a New Mailing List
“Call Manager”
→
“Message Groups”
→
“Add New
Group”
1. Enter the group name.
The new group name is displayed following the last group
on the Group List screen.
To Add Recipients to a Group
Up to 20 recipients can be registered in each list.
“Call Manager”
→
“Message Groups”
1. Select the desired group name.
2. Select “Assign New Entry”.
3. Select the desired entry.
The detailed screen is displayed.
4. Select the desired phone number or Email address.
Tip
•If you modify the entry assigned in the group, you need to
re-assign it to the group. Select the entry, press [Options],
then select “Re-assign Entry” in step 2.
•To remove an entry from the group, select the entry, press
[Options], then select “Remove Entry” in step 2.
•To remove a group, press [Options] and select “Delete” in
step 1.
To Send a Message Using a Mailing List
“Call Manager”
→
“Message Groups”
1. Highlight the desired group name.
2. Press [Options] and select “Create Message”.
For further procedures, see “Creating a New Message” on
page 67.
(M 8-7)
48 Call Manager
Editing Phonebook Entries
“Call Manager”
→
“Phonebook”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Edit”.
3. Modify the information.
4. Press [Save] when finished.
Adding a Thumbnail to Entries
Only Phonebook entries saved to the handset can have
Thumbnails attached to them.
“Call Manager”
→
“Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Picture”.
4. Select “Assign Picture”.
5. Select the desired picture.
6. Press [Save] when finished.
Note
•If you delete a picture in the handset memory, the
corresponding thumbnail is also deleted.
•To store a picture right after it was taken, select “Take
Picture” in step 4.
Assigning a Ringtone or a Ring Video Clip to Each Entry
“Call Manager”
→
“Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Tone/Video for Voice Call”, “Tone/Video for
Video Calling” or “Tone/Video for New Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “Sound Gallery”.
6. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video clip, see
“Assigning a Ringtone for an Incoming Call” or “Assigning
a Ring Video Clip for an Incoming Call” on page 120.
7. Press [Save] when finished.
Call Manager 49
Deleting Phonebook Entries
Deleting All Phonebook Entries
“Call Manager”
→
“Advanced”
→
“Delete All Entries”
1. Select from “Handset Entries”, “SIM Entries” or “Both
Entries”.
2. Enter your handset code.
For details on the handset code, see “Change Handset
Code” on page 126.
Deleting a Phonebook Entry
“Call Manager”
→
“Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Delete”.
Managing the Phonebook
Copying Phonebook Entries between SIM/USIM Card
and Handset
“Call Manager”
→
“Advanced”
→
“Copy All Entries”
1. Select “From SIM to Handset” or “From Handset to
SIM”.
Note
•When you insert the SIM/USIM card into your phone for the
first time and start the Phonebook application, the
confirmation screen is displayed automatically, asking you if
you wish to copy or not. The number of Phonebook entries to
be copied varies depending on the SIM/USIM capacity.
•If the memory space is not enough to save all entries, you
cannot complete copying.
(M 8-10-3)
(M 8-10-1)
50 Call Manager
Sending a Phonebook Entry
“Call Manager”
→
“Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Send Phonebook”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “As Message”
For details, see “MMS” on page 67.
For “Via Bluetooth”
For details, see “Bluetooth” on page 141.
For “Via Infrared”
For details, see “Infrared” on page 144.
Receiving a Phonebook Entry
When the phone receives a Phonebook entry, a confirmation
message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Phonebook. Press [No]
to reject.
Tip
•For details on entering Infrared or Bluetooth wireless
settings, see “Connectivity” on page 141.
Manage Groups
Different ringtones can be set for each category. If you do not
change a category ringtone, the ringtone assigned in the
Profiles menu is used.
“Call Manager”
→
“Manage Groups”
1. Highlight the desired category.
2. Press [Options] and select “Assign Tone/Video”.
3. Select “For Voice Call”, “For Video Calling” or “For New
Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “Sound Gallery”.
6. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video clip, see
“Assigning a Ringtone for an Incoming Call” or “Assigning
a Ring Video Clip for an Incoming Call” on page 120.
(M 8-4)
Call Manager 51
Editing the Category Name
You can edit category names to be assigned to the Phonebook
entries.
“Call Manager”
→
“Manage Groups”
1. Highlight the desired category name.
2. Press [Edit] and select “Edit Name”.
3. Modify the name.
Speed Dial List
You can set a maximum of 8 phone numbers in the Speed Dial
list (p. 25).
Setting Phonebook Entries in the Speed Dial List
“Call Manager”
→
“Speed Dial List”
1. Select the desired entry.
2. Highlight the desired phone number.
3. Press [Assign].
Tip
•The nine digit keys (G-O) correspond to Speed Dial
list numbers.
To Edit the Speed Dial List
“Call Manager”
→
“Speed Dial List”
1. Highlight the entry you wish to edit.
2. Press [Change].
Memory Status
This function helps you to check the memory used in the
Phonebook.
“Call Manager”
→
“Advanced”
→
“Memory Status”
(M 8-6)
(M 8-10-2)
52 Multimedia
Multimedia
FoneTV
You can connect to the FoneTV service by selecting this menu.
Note
•To use FoneTV on your phone, you need to be in an area of
3G coverage.
•To use FoneTV on your phone, you need to purchase a
subscription package from your operator.
www
You can access the internet by selecting this menu to connect
to the www service.
Note
•To use www service on your phone, you need to be in an
area of coverage.
Videos
Playing Back the Last File
“Multimedia”
→
“Videos”
→
“Last Played Video”
Playing Back Video Clip Files
“Multimedia”
→
“Videos”
→
“My Videos”
1. Select “All Videos” or the desired playlist.
2. Select the desired file.
To pause playback, press B.
To stop playback, press U.
Tip
•You can control the video player by using the following keys:
a/b
: Increases or decreases the volume.
b
(long press): Mutes.
d
: Jumps to the next file.
c
: Returns to the start of the current file.
cc
: Jumps to the previous file.
d
(long press): Fast-forwards.
c
(long press): Rewinds.
The side keys are always available to change the volume
level.
•Pressing H changes the size of the video display in the
following order: Normal, Enlarge, Full Screen, Wide Screen
and Cinema Screen. Note that this does not change the
Display Size setting.
•Pressing Q displays this help information.
(M 7)
(M 7-1)
(M 7-2)
(M 7-3)
(M 7-3-1)
(M 7-3-2)
Multimedia 53
Searching a File to Be Played Back
“Multimedia”
→
“Videos”
→
“My Videos”
1. Select “All Videos” or the desired playlist.
2. Press [Options] and select “Search”.
3. Enter a few letters of the title.
Search results are displayed in alphabetical order and the
matching file is highlighted. The search will match the
entered text with any part of the title.
Adding a File to the Playlist
You can add files to a playlist.
“Multimedia”
→
“Videos”
→
“My Videos”
1. Select “All Videos” or the desired playlist.
2. Highlight the file you wish to add to the playlist.
3. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on creating a
playlist, see “Adding a New Playlist”.
4. Select the desired playlist.
The file highlighted in step 2 is saved.
To delete files from the playlist, highlight the file in the
playlist and press [Options]. Then select “Delete from
Playlist”.
Adding a New Playlist
You can create a playlist and register desired files in it.
“Multimedia”
→
“Videos”
→
“My Videos”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
3. Press B.
Note
•To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
Settings
You can select a play mode for “Playback Pattern”, “Backlight”,
“Display size” and “Sound Effects” when playing back video
clip files.
“Multimedia”
→
“Videos”
→
“Settings”
1. Select from “Playback Pattern”, “Backlight”, “Display
size” or “Sound Effects”.
54 Multimedia
2. Select from the following:
• “Playback Pattern”
“Normal”:
Plays back all files in the selected
folder once and stops playback.
“Repeat”: Continues playback of selected
file in the selected folder.
“Repeat All”: Continues playback of all files in
the selected folder.
“Random”: Plays back files in the selected
folder at random.
• “Backlight”
“Always On”: Lit while the file is played back.
“Always Off”: Unlit while the file is played back
even if a key is pressed.
“Normal Settings”: Works with the main backlight
setting (p. 118).
• “Display size”
“Normal”: Displays the file in its original
size.
“Enlarge”: Displays the file in an enlarged
size.
“Full Screen”: Displays the file on the full
screen.
“Wide Screen”: Displays the file on the wide
screen.
“Cinema Screen”: Displays the file on the cinema
screen.
• “Sound Effects”
“Normal”: Plays back file without any
sound effects.
“Bass”: Plays back file with enhanced
bass sound.
“Surround”: Plays back file with surround
sound.
“Surround Bass”: Plays back file with surround
sound and enhanced bass
sound.
“Loud-Wide”: Plays back file with dynamic
sound.
“Karaoke”: Plays back file with the vocal
part softened.
“Rock”: Plays back file with enhanced
balance.
“Hall”: Plays back file with enhanced
reverberation.
“Hiphop”: Plays back file with bass sound
and enhanced resonance.
Downloading Video Clip Files
“Multimedia”
→
“Videos”
→
“Download Videos”
The video clip file download site is displayed.
(M 7-3-4)
Multimedia 55
Music
Music player supports MP3, MPEG-4 and 3GPP format sound
files. You can access other menus while listening to sound files.
Creating a New Playlist
You can create your own playlist, storing and managing your
favourite tracks and the order of tracks.
“Multimedia”
→
“Music”
→
“My Music”
→
“Playlists”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
Note
•To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
•You can create up to 99 playlists.
Playing Back Sound Files
“Multimedia”
→
“Music”
→
“My Music”
1. Select the item you wish to play back.
•“All Music”:
All sound files are displayed.
• “Artists”:
The names of all artists are displayed.
When an artist is selected, all of their albums are
displayed.
When an album is selected, all of the sound files in the
selected album are displayed.
•“Albums”:
The names of all albums are displayed.
When an album is selected, all of the sound files in the
selected album are displayed.
• “Playlists”:
All playlists are displayed.
When any playlist is selected, all of the sound files in the
selected playlist are displayed.
2. Select the desired sound file.
To pause playback, press B.
To stop playback, press F and go back to standby, then
press F again. Select “Yes” when the pop-up appears.
(M 7-4)
56 Multimedia
Note
•Select “Music” to update the list of available music tracks.
•You are asked whether or not to play sounds when the Silent
mode is activated.
•To play the last played file, select “Last Played Music”.
“Currently Playing” is displayed when a file is being played
back.
•When you receive a call, playback of the current file is
paused, and you can receive the call. After the call ends,
select “Currently Playing” to resume playback.
Tip
•You can return to the Main menu screen while playing back
the file in the background.
•You can create your playlist by listing only the desired files
(p. 55).
•Sound files in both the handset and the memory card are
displayed in a single view.
•To select the playback pattern, press [Options] and select
“Playback Pattern”.
“Normal”: Plays back all files in the selected folder once
and stops playback.
“Repeat”: Continues playback of selected file in the
selected folder.
“Repeat All”: Continues playback of all files in the selected
folder.
“Random”: Plays back files in the selected folder at
random.
•While in the music player, the player can be controlled by
using the following keys:
a/b
:
Increases or decreases the volume.
b (long press): Mutes.
d: Jumps to the next file.
c: Returns to the start of the current file.
cc: Jumps to the previous file.
d (long press): Fast-forwards.
c (long press): Rewinds.
F: Plays back the file in the background.
The side keys are always available to change the volume
level.
Multimedia 57
Sorting Files
“Multimedia”
→
“Music”
→
“My Music”
→
“All Music”
1. Press [Options] and select “Sort”.
2. Select “By Title”, “By Artist”, “By Album”, “By Genre” or
“By Rating”.
Sort results are displayed.
Adding a File to the Playlist
You can add files to a playlist.
“Multimedia”
→
“Music”
→
“My Music”
→
“All Music”
1. Highlight the file you wish to add to the playlist.
2. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on adding a playlist,
see “Creating a New Playlist” on page 55.
3. Select the desired playlist.
The file highlighted in step 1 is saved.
To delete files from the playlist, highlight the file in the
playlist and press [Options]. Then select “Delete from
Playlist”.
Note
•
You can store up to 99 files in one playlist. However, the total
number of files stored on your phone cannot exceed 350 files.
Downloading Music Files
“Multimedia”
→
“Music”
→
“Download Music”
The music file download site is displayed.
(M 7-4-3)
58 Camera
Camera
Your phone has a built-in digital camera that allows you to take
pictures and record video clips wherever you are. This section
starts with basic functions and operational procedures to take,
save and send pictures and video clips, followed by common
and unique functions to camera and video modes.
Taking Pictures
“Camera”
1. Press B to take the picture.
The shutter sounds and the still image of the taken picture
is displayed.
2. Press B to save the picture.
The taken picture is saved in Gallery.
To cancel, press [Cancel].
To send the taken picture, press C in step 2.
Note
•When the video camera is launched, press C.
•When you try to send a picture that has too large a file size,
the picture size is resized for the message. The original sized
picture is saved in Gallery.
Tip
•You can activate the camera by long pressing X in standby.
Simply press X to take pictures, and start and stop
recording.
•You can lock the focus by pressing D before taking a
picture or recording a video clip.
(M 5)
Camera 59
Recording Video Clips
You can record a video clip with your phone.
“Camera”
The preview is displayed on the screen.
When in photo camera mode, press C to switch to video
camera mode.
1. Press B.
2. To stop recording, press B.
3. Select “Save”.
The video clip is saved in Gallery.
To view the preview before saving, select “Preview”.
To send the video clip, select “Send”.
For further procedures, see “Creating a New Message” on
page 67.
Note
•You can only send video clips when “For Message” is
selected for the recording time. For details, see “Selecting
the Recording Time and Picture Size” on page 66.
Common Functions in the Photo and
Video Camera Modes
Using the Digital Zoom Function
To Adjust the Zooming Ratio
1. Press a or b.
Once the phone has returned to standby, the zoom settings
return to default.
Adjusting the Exposure
“Camera”
→
[Options]
→
“Shooting Settings”
→
“Exposure”
“Camera”
→
[Options]
→
“Record Settings”
→
“Exposure”
1. Press d (Bright) or c (Dark).
: (Dark → Normal → Bright)
Once the phone has returned to standby, the brightness
settings return to default.
60 Camera
Switching the Focus Mode
“Camera”
→
[Options]
→
“Shooting Settings”
→
“Focus”
“Camera”
→
[Options]
→
“Record Settings”
→
“Focus”
1. Select the desired option.
: Auto Focus
: Manual Focus
:Macro
Selecting the Picture or Video Quality
Select the appropriate option.
“Camera”
→
[Options]
→
“Picture Quality”
“Camera”
→
[Options]
→
“Video Quality”
1. Select the desired picture or video quality.
: Super Fine
:Fine
:Normal
Note
•The better quality you select, the larger the file size
becomes.
Using the Self-Timer
Select the appropriate option.
“Camera”
→
[Options]
→
“Self-timer”
1. Select “2sec”, “5sec” or “10sec”.
When you select one of these options, the corresponding
indicator (“ ”, “ ”, or “ ”) is displayed on the screen.
Select “Off” to cancel the self-timer.
Selecting the Storage Memory
Select the appropriate option.
“Camera”
→
[Options]
→
“Settings”
→
“Save New
Pictures”
“Camera”
→
[Options]
→
“Settings”
→
“Save New
Videos”
1. Select the desired location from “To Handset Memory”,
“To Memory Card” or “Choice”.
Note
•If you select “Choice”, select the desired location every time
you save.
Camera 61
Auto Save
You can set the phone to save pictures and video clips
automatically.
“Camera”
→
[Options]
→
“Settings”
→
“Auto Save”
1. Select “On” or “Off”.
Using the Help Function
“Camera”
→
[Options]
→
“Help”
Mobile Light
To Change the Mobile Light Mode
Set the mobile light according to your purpose.
“Camera”
→
[Options]
→
“Mobile Light”
1. Select the desired mode.
“On” ( ): The light is always on.
“Auto” ( ): The light turns on if the phone detects that
the conditions are dark.
“Low Light” ( ) (photo camera mode only):
Select this mode for macro shooting.
“Off”: The light is always off.
The corresponding indicator is displayed on the screen.
Select “Off” to turn it off.
Switching between the Photo and Video Camera Modes
You can switch between the photo and video camera modes by
pressing C.
62 Camera
Common Shortcut Keys
If multiple options exist, they switch each time you press each
of the following keys.
Note
•The “Switches the display modes” option is available in
“Preview” before you save a video clip. See “Recording Video
Clips” on page 59.
Functions in Photo Camera Mode
Selecting the Picture Size
You can select the size of pictures. All taken pictures are saved
in the JPEG format.
“Camera”
→
[Options]
→
“Picture Size”
1. Select the desired size.
1536 × 2048 dots/1080 × 1920 dots/
1200 × 1600 dots/960 × 1280 dots/
480 × 854 dots/480 × 640 dots/
240 × 320 dots/120 × 160 dots/
1536 × 864 dots/854 × 480 dots
Photo Camera Video Camera
DFocus Lock
GFocus
HSwitches Viewfinder
between with and without
indicators
Switches the display
modes in the Preview
screen
JSave New Pictures Save New Videos
KPicture Size
LScene Microphone
MPicture Quality Video Quality
NSelf-timer
OZoom Max/Min
QHelp
RMobile Light
Camera 63
Continuous Shoot
There are various modes for taking continuous shots.
“Camera”
→
[Options]
→
“Modes”
→
“Continuous
Shoot”
1. Select the desired mode.
The following continuous shoot modes are available:
“Off”: The continuous shoots are
cancelled.
“4 Pictures”/“9 Pictures” ( / ):
Takes 4 or 9 pictures
continuously.
After selecting this mode, select
from “Fast”, “Normal”, “Slow”
or “Manual”.
“Overlapped” ( ): Overlaps continuous pictures
into one picture and makes an
afterimage.
After selecting this mode, select
“Fast” or “Normal”.
Note
•When you select “Manual” to take continuous pictures,
press B manually at the desired speed.
•You cannot use the Continuous Shoot function for picture
sizes larger than 480
×
640 dots. “9 Pictures” and
“Overlapped” are not available for picture sizes larger than
240
×
320 dots.
Taking Panorama Pictures
“Camera”
→
[Options]
→
“Modes”
→
“Panorama/
Scanner”
→
“Panorama”
1. Select “On” and press B.
2. Move the phone slowly to keep the + mark aligned with
the assisting lines, and press B.
3. Select “Save”.
Note
•The image is captured automatically if the bar in the lower
right turns blue before B is pressed in step 2.
64 Camera
To Set the Assisting Lines
“Camera”
→
[Options]
→
“Settings”
→
“Panorama
Settings”
→
“Assisting Lines”
1. Select “On” or “Off”.
Note
•An error message is displayed if you move the phone fast
when taking panorama pictures with this setting on.
To Set the AE-Lock
When this setting is enabled, the exposure setting is fixed for
the same brightness level.
“Camera”
→
[Options]
→
“Settings”
→
“Panorama
Settings”
→
“AE-Lock”
1. Select “Enable” or “Disable”.
Scanning Images
“Camera”
→
[Options]
→
“Modes”
→
“Panorama/
Scanner”
→
“Scanner”
1. Select a picture size.
2. Press B.
3. Move the phone slowly to scan, and press B.
4. Select “Save”.
Selecting the White Balance
“Camera”
→
[Options]
→
“Shooting Settings”
→
“White Balance”
1. Select from “Auto”, “Daylight”, “Cloud/Shade”,
“Tungsten” or “Fluorescent”.
Camera Effects
You can select from various camera effects.
“Camera”
→
[Options]
→
“Modes”
→
“Camera
Effects”
1. Select from “Sepia”, “Monochrome” or “Negative”.
Note
•You cannot use the Camera Effects function for picture sizes
larger than 240
×
320 dots.
Camera 65
Selecting a Frame
You can select the frame from preset patterns or Pictures.
“Camera”
→
[Options]
→
“Modes”
→
“Add Frame”
1. Select “Preset Frames” or “Picture Gallery”.
2. Select the desired frame.
The selected frame is confirmed on the display.
3. Press B.
Note
•Images larger than 240 dots [W]
×
320 dots [H] cannot be
used.
Selecting the Scene
You can select the appropriate mode by scene when you take
a picture.
“Camera”
→
[Options]
→
“Scene”
1. Select from “Auto”, “Night”, “Sports”, “Text”, “Pet”,
“Against Sun” or “Portrait”.
Using the Full Screen
You can display the preview on the full screen without the soft
key area and indicator area.
“Camera”
→
[Options]
→
“Settings”
→
“Display
Indicators”
→
“Full Viewfinder”
1. Select “Full Viewfinder”.
To return to the normal viewfinder, select “Normal
Viewfinder”.
Selecting the Shutter Sound
“Camera”
→
[Options]
→
“Settings”
→
“Shutter
Sound”
1. Select the desired shutter sound from 3 preset patterns.
To play back the shutter sound, press [Play] in step 1.
Note
•Continuous Shoot uses the specialised shutter sound that
cannot be changed using the above settings.
•The shutter sound remains active even when “General
Volume” (p. 119) is set to “Silent” to prevent unauthorised
use.
66 Camera
Functions in Video Camera Mode
Selecting the Recording Time and Picture Size
“Camera”
→
[Options]
→
“Record Time”
1. Select “For Message”, “Extended Video” or “SD Video”.
For Message ( ): Limits the size to send a
message depending on service
providers.
Extended Video ( ): Less than 30 minutes
(depending on the memory).
SD Video ( ): Records in SD Video format.
2. Select the desired picture size.
If “For Message” is selected, select “QCIF(176×144)” or
“SubQCIF(128×96)”.
If “Extended Video” is selected, select “VGA(640×480)”,
“Wide(400×240)”, “QVGA(320×240)”,
“HQVGA(240×176)”, “QCIF(176×144)” or
“SubQCIF(128×96)”.
If “SD Video” is selected, select “VGA(640×480)” or
“QVGA(320×240)”.
Note
•If you select “For Message” for the recording time, the file
size is limited depending on the service provider. Therefore,
the quality is also limited for the setting.
•“Save and Send” is not displayed after recording in the
Extended Video mode.
Recording Video Clips with Sound
To record a video clip with sound, the microphone needs to be
activated.
“Camera”
→
[Options]
→
“Microphone”
1. Select “On” or “Off”.
Note
•The microphone is already turned on in the default setting.
Select “Off” to record a video clip without the sound.
•The file size of a video clip can be reduced if the sound is not
recorded.
Video Encoding
“Camera”
→
[Options]
→
“Settings”
→
“Video
Encode”
1. Select the appropriate format.
Messages 67
Messages
Your phone allows you to send and receive text, multimedia and
Email. It is compatible with most POP3 Email providers.
SMS
SMS allows you to send text messages up to 765 characters
long. If you send a message of more than 160 characters, it is
split into several segments.
MMS
With MMS, you can send images, sound or video to brighten
someone’s day. Messages of up to 300 KB with images,
sound, or video clips can be sent and received.
Email
Email allows you to send messages of up to 300 KB.
Note
•Some MMS functions may not always be available
depending on your network. Contact your service provider for
more information.
•Maximum message size varies depending on the restrictions
set by the service provider.
Creating a New Message
(SMS/MMS)
“Messages”
→
“Create Message”
→
“Message”
(Email)
“Messages”
→
“Create Message”
→
“Email”
1. Select the recipient field.
2. Select the desired method to enter the recipient’s
details.
3. For MMS, enter or select the Email address or phone
number from the Phonebook. For SMS, enter or select a
phone number. For Email, enter or select an Email
address.
• To add multiple Email addresses or phone numbers,
highlight the recipient field, press [Options], and select
“Edit Recipient” and then select “Add Recipient”. Enter
or select the Email address or phone number from the
existing Phonebook.
• To change the recipient types, press [Options], select
“Edit Recipient” and highlight the desired recipient.
Press [Options] and select “Change to To”, “Change to
Cc” or “Change to Bcc”.
• To add a subject, highlight the subject field and press
B. Then enter the subject in the subject entry screen
and press B.
(M 4) (M 4-1)
68 Messages
4. Place the cursor in the message field.
5. Press B to display the message entry screen.
Enter the message and press B.
6. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
After the message is sent, the message is moved to the
Sent box.
Note
•When you create an SMS message, the mode is
automatically switched to MMS in the following cases:
•When an Email address is entered in the recipient field.
•When a subject is entered.
•When the size of entered text has exceeded the SMS size
limit.
Tip
•To send the same message to a group of recipients, select
“Select Message Group” in step 2, then select the desired
group name. For details on creating a mailing list, see “To
Create a New Mailing List” on page 47.
To Add a Slide Show
1. Perform steps 1 to 5 in “Creating a New Message” on
page 67.
2. Press [Options] and select “Add Slide”.
3. Select “Add Slide After” or “Add Slide Before”.
4. Enter another message.
If you wish to set the duration of each slide, highlight your
message or other inserted item such as a picture or sound
file. Press [Options] and select “Slide Duration”, then select
the desired duration. Repeat steps 2 to 4 to add more
slides.
Tip
•You can create messages up to 300 KB. Each slide can
contain one picture and/or one sound file or video clip.
Messages 69
To Attach Data
1. In step 6 in “Creating a New Message” on page 67,
press [Options] and select “Insert Item”.
2. Select “Picture”, “Sound”, “Video”, “Attach Contact”,
“Attach Appointment” or “Others”.
When selecting “Attach Contact” or “Attach Appointment”,
go to step 4.
3. Select the desired option and then select the desired file.
If you wish to attach pictures, sounds or video clips that are
saved, select “Saved Picture”, “Saved Sound” or “Saved
Video”.
If you wish to take new pictures, record sounds or video
clips, select “Take Picture”, “Record Voice” or “Record
Video”.
4. Select the desired data.
If you wish to select your own Phonebook entry, select “My
Card”.
When attaching an appointment, select the desired day
including a schedule entry you wish to add and select the
desired schedule entry.
Note
•When attaching JPEG files, select the appropriate resize
option, as the maximum message size for sending varies
depending on the service provider.
To Remove Attachments
1. In step 6 in “Creating a New Message” on page 67,
highlight the desired item, press [Options] and then
select “Remove Item”.
70 Messages
Using the Sending Options
You can use the message sending options for each type of
message.
1. Press [Options] and select “Messaging Settings”.
• “Delivery Report” (“On”, “Off”) (SMS/MMS): Enables or
disables Delivery Report when the message is
successfully sent to the recipient.
• “Expiry Time” (“Maximum”, “1 hour”, “12 hours”, “1
day”, “1 week”) (SMS/MMS): Sets Expiry Time for a
message to be saved in the server.
• “Priority” (“High”, “Normal”, “Low”): Prioritises
composed messages.
• “Read Report” (“On”, “Off”) (SMS/MMS): Confirms
whether or not a report is sent notifying the sender that
the message has been read.
2. Press [Options] and select “Send”.
After the message is sent, the message is moved to the
Sent box.
Note
•The current message size displayed while you are creating
the message is an approximation.
•If a message cannot be sent for some reason, the message
stays in the Outbox and the “ ” is displayed in standby.
Tip
•To save the message without sending, press [Options] and
select “Save to Drafts” in step 6 in “Creating a New
Message” on page 67.
•You can send the following items attached to multimedia
messages. Details are given in the following sections.
•Gallery data
•Phonebook entry
•Schedule entry created by Calendar, etc.
•You can use the template option to help you compose
messages. For details on using this option, see “Using
Templates” on page 41.
Messages 71
Sending a Message in the Drafts Box
(SMS/MMS)
“Messages”
→
“Message”
→
“Drafts”
(Email)
“Messages”
→
“Email”
→
“Drafts”
1. Highlight the desired message.
2. Press [Options] and select “Edit & Send”.
3. Modify the message, if necessary.
4. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
Reading a Message
Messages you receive are saved in the Inbox.
(SMS/MMS)
“Messages”
→
“Message”
→
“Inbox”
(Email)
“Messages”
→
“Email”
→
“Inbox”
1. Select a folder.
2. Select the message you wish to view.
72 Messages
Storing the Phone Number of a Sender in the Phonebook
(SMS/MMS)
“Messages”
→
“Message”
→
“Inbox”
(Email)
“Messages”
→
“Email”
→
“Inbox”
1. Select a folder.
2. Highlight the message from which you wish to store the
phone number or Email address.
3. Press [Options] and select “Save Address”.
The new Phonebook entry screen including the phone
number is displayed. For details on creating a new
Phonebook entry, see “Adding a New Entry” on page 44.
Calling the Phone Number of a Sender Embedded in the
Message
(SMS/MMS)
“Messages”
→
“Message”
→
“Inbox”
(Email)
“Messages”
→
“Email”
→
“Inbox”
1. Select a folder.
2. Highlight the message containing the phone number you
wish to dial.
3. Press [Options] and select “Call Sender”.
Downloading a Single MMS
“Messages”
→
“Message”
→
“Inbox”
1. Highlight the message alert ( ) you wish to download.
2. Press [Options] and select “Download”.
Messages 73
Replying to a Message or to All Addresses
(SMS/MMS)
“Messages”
→
“Message”
→
“Inbox”
(Email)
“Messages”
→
“Email”
→
“Inbox”
1. Select a folder.
2. Highlight the message you wish to reply to.
3. Press [Options] and select “Reply” (to sender only) or
“Reply All” (to all other recipients listed in the original To
or Cc lists).
4. Select “Reply” or “Reply with History”.
5. Enter the message.
6. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
Forwarding a Message
(SMS/MMS)
“Messages”
→
“Message”
→
“Inbox”
(Email)
“Messages”
→
“Email”
→
“Inbox”
1. Select a folder.
2. Highlight the message you wish to forward.
3. Press [Options] and select “Forward”.
4. Perform steps 1 to 6 in “Creating a New Message” on
page 67.
Sorting the Messages in the List
(SMS/MMS)
“Messages”
→
“Message”
→
“Inbox”
(Email)
“Messages”
→
“Email”
→
“Inbox”
1. Select a folder.
2. Press [Options] and select “View Settings”.
3. Select “Sort”.
4. Select the desired sort option.
74 Messages
Cell Broadcasts
You can receive cell broadcast messages or general messages
such as weather forecasts and traffic reports. This information
is broadcast to subscribers in certain network areas.
This function may not be available on all mobile phone
networks. Contact your service provider for more information.
Enabling/Disabling Cell Broadcasts
“Messages”
→
“Cell Broadcasts”
→
“Switch On/Off”
1. Select “On” or “Off”.
Reading Cell Broadcast Messages
“Messages”
→
“Cell Broadcasts”
→
“Read Messages”
1. Select the desired subject.
2. Scroll the screen to read the message.
3. Press U.
Setting Languages for Cell Broadcast Messages
“Messages”
→
“Cell Broadcasts”
→
“Settings”
→
“Language”
The current language is displayed.
1. Press B.
2. Highlight the desired language and press B to check.
3. Press [Save].
Subscribing to Cell Broadcasts
Select the page of the cell broadcast message that you want.
“Messages”
→
“Cell Broadcasts”
→
“Settings”
→
“Set
Info Subjects”
1. Press B.
2. Highlight the desired subject and press B to check.
3. Press [Save].
Tip
•If the desired subject is not in the list that appears in step 2,
press [Options] and select “Create Subject” in step 1, then
enter the subject code to add a page. For details on the
subject code, contact your service provider.
(M 4-6)
Messages 75
Area Info
The Area Info is the message information that operators send
to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed in standby.
Enabling/Disabling Area Info
“Messages”
→
“Area Info”
1. Select “On” or “Off”.
Note
•This function may not be available on all mobile phone
networks. Contact your service provider for more
information.
•If Area Info is set to “On”, the standby time will decrease.
Messaging Settings
General Settings
“Messages”
→
“Messaging Settings”
→
“General Settings”
1. Select the item you wish to set up.
•“Signature”:
Enables or disables “Auto Insert”. Select “Edit” to edit
current signature.
• “Auto Delete”:
Deletes the oldest message automatically, when the
Inbox, Sent or Both (Inbox and Sent) is full.
• “Message List View”:
Switches the mailbox listing (“Two-line View”,
“Sender+Preview”, “Subjects+Preview”, “Sender”,
“Subjects”).
•“Scroll Unit”:
Scroll through messages by “Single Line”, “Half Page”
or “Whole Page”.
• “Message Type”:
Sets the type of message to send by default when a
message is composed. When set to “Free”, the
message is sent automatically either as an SMS or MMS
as appropriate.
(M 4-7) (M 4-8)
76 Messages
SMS Settings
“Messages”
→
“Messaging Settings”
→
“SMS Settings”
1. Select the item you wish to set up.
•“Delivery Report”:
Enables or disables Delivery Report request.
• “Automatic Resend”:
Tries to resend the failed SMS message up to two times
(“On” or “Off” selection).
• “Expiry Time”:
This indicates the number of days and hours for which
a message you send may remain undelivered to the
message recipient. During this period, the message
service centre will continually try to deliver the message
to the recipient.
• “Message Centre”:
Enter the message centre number. Up to 2 numbers can
be registered.
If you wish to enter a country code for a message to an
international number, long press Q until a + sign is
displayed.
•“Reply Path”:
Enables or disables adding a reply path to the message.
• “Connection Type”:
Sets the preferred connection type (“GPRS Preferred”,
“CSD Preferred”).
Messages 77
MMS Settings
“Messages”
→
“Messaging Settings”
→
“MMS Settings”
1. Select the item you wish to set up.
• “MMS Accounts”:
Select the desired account or select “Create New” to
enter the following settings.
“Profile Name”: MMS profile name (unique
name)
“Proxy”: Proxy setting for MMS
“Relay Server URL”: MMS relay server
• “Home Download”:
Controls the message download timing inside your
network area.
“Always Download”: Downloads messages
immediately from the server.
“Always Defer”: Defers message download.
• “Roaming Download”:
Controls the message download timing when roaming
outside of your network.
“Always Download”: Downloads messages
immediately from the server.
“Always Defer”: Defers message download.
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Automatic Resend”:
Tries to resend the failed MMS message up to two times
(“On” or “Off” selection).
• “Delivery Report Allow”:
Confirms whether or not a report is sent notifying the
sender when you receive a message.
• “Read Report”:
Enables or disables Read Report request.
• “Read Report Allow”:
Enables or disables Read Report Allow when the
recipient is required to inform the sender that the
message has been read.
• “Expiry Time”:
This indicates the number of days and hours for which
a message you send may remain undelivered to the
message recipient. During this period, the message
service centre will continually try to deliver the message
to the recipient.
• “Slide Duration”:
Sets the duration of the slide.
78 Messages
• “Slide Auto Play”:
Enables or disables Slide Auto Play.
• “Send File Settings”:
Sets whether or not to send and save the file settings.
• “Max Message Size”:
Sets the maximum message size for sending and
disables sending MMS messages exceeding that size.
•“Creation Mode”:
When set to “Free”, you can attach files of any format to
the mail. When set to “Restricted”, only certain formats
and message sizes can be attached. The “Restricted”
setting has priority over “Max Message Size”.
•“Hide Number”:
Sets whether to show or hide the sender’s address.
• “Delivery Time” (“Immediate”, “1 hour”, “12 hours”, “1
day”, “1 week”):
Sets the time the message is delivered after the Send
key is pressed.
• “Anonymous Rejection”:
Enables or disables the rejection of messages from
anonymous senders.
To Activate the MMS Account Profile
1. Select “MMS Accounts”.
2. Select the desired profile you wish to activate.
Messages 79
Email Settings
“Messages”
→
“Messaging Settings”
→
“Email Settings”
To Set an Email Account
1. Select “Email Accounts” and highlight the preset Email
account.
You can also create a new account.
2. Press [Options] and select “Edit”.
3. Select the item you wish to set up.
“Account Name”: Email account name (unique
name)
“Incoming Server”: Server name, user ID, password,
port number, APOP
authentication and encryption
for the incoming server
“Outgoing Server”: Server name, user ID, password,
port number, SMTP
authentication and encryption
for the outgoing server
“Access Point”: Access point for Email
“Email Address”: Email address
“Advanced Settings”: Your name, signature, download
interval, download
configuration, maximum
download limit, save sent
messages
To Activate the Email Account Profile
1. Select “Email Accounts”.
2. Select the desired profile you wish to activate.
80 Browser
Browser
Your phone is already configured to access SmarTone
iN!
and
the mobile Internet.
SmarTone
iN!
is a mobile Internet portal which is your gateway
to a new world of information, games, music and services.
Because your phone uses 3G (UMTS), it has a system that is
faster than previous ways of getting mobile information. Also,
the connection is ‘always on’ which means there is no need to
wait for dialling up. You only have to pay for the data you send
or receive, not how long you’re connected.
Your phone contains a WAP/Web browser used for surfing on
the mobile Internet, where you can get a lot of useful
information.
Normally, pages are designed for a mobile phone.
Your phone is already set up to SmarTone
iN!
site for Browser/
MMS Settings.
Main Menu
“Browser”
→
“Homepage”
The SmarTone
iN!
service page is displayed.
“Browser”
→
“Go to URL”
The URL entry screen is displayed. You can type in the URL of
a site directly.
“Browser”
→
“Bookmarks”
See page 81.
“Browser”
→
“Alert Inbox”
WAP Push alerts are displayed.
“Browser”
→
“My Saved Page”
You can view all the screenshots that have been saved onto the
handset memory.
“Browser”
→
“Access History”
The history of pages you have recently browsed is displayed.
“Browser”
→
“Browser Settings”
See page 82.
(M 2)
Browser 81
Navigating a WAP or Web Page
•a b c d: Moves the highlight around in the screen.
•A: Launches the option menu if it has not
been launched.
Used to select an option from the option
menu.
•B: Executes the highlighted item in the
screen.
•C: Visits “SmarTone
iN!
” by opening the
browser when in standby.
Moves to previous page when the
browser is active.
•F(short press): Exits the browser.
(long press): Turns off the phone.
Editing Bookmarks
“Browser”
→
“Bookmarks”
1. Select the desired URL, and press [Options].
You can edit the list of Bookmarks by the following options:
(When a bookmark is highlighted)
“Edit”: Edits URL address of the
bookmark.
“Add New Bookmark”: Creates new bookmarks.
“Create Folder”: Creates new folders.
“Open in New Tab”: Opens a bookmark in a new tab.
“Send”: Sends the URL address to
recipients.
“Move”: Moves bookmarks to another
location or into a folder.
“Details”: Displays detailed information of
the WAP/Web page.
“Delete”: Deletes a bookmark.
“Delete All”: Deletes all bookmarks.
(M 2-3)
82 Browser
(When a folder is highlighted)
“Add New Bookmark”: Creates new bookmarks.
“Create Folder”: Creates new folders.
“Move”: Moves folder and bookmarks in
the folder to another location.
“Rename Folder”: Renames the folder.
“Delete”: Deletes the folder and
bookmarks in the folder.
“Delete All”: Deletes all folders and
bookmarks.
(When there are no bookmarks)
“Add New Bookmark”: Creates new bookmarks.
“Create New Folder”: Creates new folders.
Browser Settings
“Browser”
→
“Browser Settings”
“Font Size”: Sets the font size for browsing.
“Scroll Settings”: Sets the speed of scrolling.
“Cursor Settings”: Sets whether or not to show the
cursor, and its speed.
“Downloads”: Sets whether or not to show
images when accessing the
WAP/Web page.
“Memory Operation”: Clears Cache, Cookies, or
Authentication information.
“Security Settings”: Adjusts the security prompt
level.
“Download to”: Sets the preferred download
location.
“Zoom Factor”: Sets the zoom ratio for viewing a
page.
“Zoom Area”: Sets the window size for
displaying enlarged specific
area.
“WAP Push”: Sets whether you need
confirmation for push message.
“Initialized Browser”: Initializes the browser settings
and memory.
“Reset Settings”: Resets all the browser settings
to the default settings.
(M 2-7)
Browser 83
Browser Options when Online
You can use the various options of the browser.
C
→
[Options]
“Home”: Goes to the homepage.
“Alert Inbox”: Displays WAP push alert.
“Forward”: Goes to the next page.
“Open This Frame”: Opens the selected frame.
(This option is available only
when a frame page is
displayed.)
“Bookmarks”: See page 81.
“My Saved Page”: Displays all the browser
screenshots saved in the
handset memory.
“Copy Text”: Copies the text on the WAP/Web
page.
“Reload Page”: Reloads the WAP/Web page to
get updated information.
“Go to URL”: Allows you to type in the URL of
a site directly. Handset browser
will go to the WAP/Web page
that you entered.
“Save Items”: Saves items from the browsing
pages.
“Complete Page Display”: Allows the browser to display in
complete page mode or Virtual
Screen mode.
“Convenient Functions”: Displays functions for page
operation.
“Access History”: Shows the history where you
have browsed.
“Flash®Menu”: Displays Flash® menu. (This
option is available only when a
Flash® file is displayed.)
“SVG Menu”: Displays SVG menu. (This option
is available only when a SVG file
is displayed.)
“Tab Menu”: Displays the tab menu. (This
option is available only when two
or more windows are opened.)
“Settings”: Displays the settings menu.
“Help”: Displays the Help screen.
“Exit”: Exits the browser.
84 Gallery
Gallery
Gallery contains all your pictures, music and videos. You can
also transmit pictures, sounds and video clips via infrared or
Bluetooth
wireless technology to other OBEX-enabled devices.
Pictures
Pictures that are taken by your cameraphone or images that
are downloaded from mobile Internet sites can be viewed,
edited and organised.
Viewing Pictures
“Gallery”
→
“Pictures”
1. Select the file you wish to view.
The selected picture is displayed.
Note
•To switch between viewing handset or memory card content,
select the first item in the options menu.
Tip
•You can scroll through your pictures with P and R.
•To change the default view of pictures (list, grid or preview),
press [Options], select “Manage Items” and then select
“Change List View”.
Using Images as Wallpaper
“Gallery”
→
“Pictures”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
Editing Pictures
“Gallery”
→
“Pictures”
1. Highlight the file you wish to edit.
2. Press [Options] and select “Edit”.
3. Select “Picture Editor” or “Composite”.
4. Select the desired option.
Note
•“Picture Editor” may not be available depending on the
original picture and copyright issued.
(M 6)
(M 6-1)
Gallery 85
Saving an Image to Phonebook Entries
This option can only be used for pictures saved in the handset
memory.
“Gallery”
→
“Pictures”
1. Highlight the file you wish to add to Phonebook.
2. Press [Options] and select “Add to Contacts”.
To overwrite, select the data you wish to save.
To save as a new entry, select “<As New Contact>”.
For details on entering a name, see “Adding a New Entry”
on page 44.
Downloading Picture Files
“Gallery”
→
“Pictures”
→
“Download Pictures”
The picture file download site, SmarTone
iN!
, is displayed.
Videos
Video clips that are recorded by your phone’s video camera or
video clips that are downloaded from mobile Internet sites can
be viewed and organised.
Playing Back Video Clip Files
“Gallery”
→
“Videos”
1. Select the file you wish to play back.
To pause playback, press B.
To resume, press B again.
To stop playback, press U.
Note
•To switch between viewing handset or memory card content,
select the first item in the options menu.
Using a Video Clip as a Ring Video Clip
You can set your video clip to play back when the phone rings.
“Gallery”
→
“Videos”
1. Highlight the desired video clip.
2. Press [Options] and select “Set as Ring Video”.
Tip
•For other option menus, see “Common Option Menus” on
page 88.
Downloading Video Clip Files
“Gallery”
→
“Videos”
→
“Download Videos”
The video clip file download site, SmarTone
iN!
, is displayed.
SD Video
Video clips with the “ASF” format that are recorded by a video
camera or downloaded from mobile Internet sites can also be
managed with SD Video.
“Gallery”
→
“SD Video”
1. Select the desired file.
To pause playback, press B.
To resume, press B again.
To delete a file, highlight the file, press [Options] and select
“Delete”.
(M 6-2)
(M 6-3)
86 Gallery
Note
•In order to manage video clips with SD Video, perform
recording as follows:
[Options]
→
“Record Time”
→
“Extended Video”
→
“QVGA(asf)”.
Music and Sounds
The downloaded sound files and the AMR data recorded by
Voice Recorder are managed in Music and Sounds. The default
ringtones are not contained within Music and Sounds. Only the
sound files that can be played back on the phone are stored in
Music and Sounds.
Playing Back Sound Files
“Gallery”
→
“Music and Sounds”
1. Select the file you wish to play back.
To stop playback, press U.
Note
•Playback may not be available for some sound files.
•To switch between viewing handset or memory card content,
select the first item in the options menu.
Using the Sound Files as a Ringtone
“Gallery”
→
“Music and Sounds”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as Ringtone”.
Tip
•For other option menus, see “Common Option Menus” on
page 88.
Downloading Sound Files
“Gallery”
→
“Music and Sounds”
→
“Download
Sounds”
The sound file download site, SmarTone
iN!
, is displayed.
Themes
You can easily customise the display by using the theme files.
Viewing Previews
“Gallery”
→
“Themes”
1. Highlight the theme file you wish to preview.
2. Press B.
The selected theme file is displayed.
Note
•To switch between viewing handset or memory card content,
select the first item in the options menu.
(M 6-4)
(M 6-5)
Gallery 87
Setting Theme
“Gallery”
→
“Themes”
1. Select the desired theme file.
The selected theme file is set as the default theme.
Tip
•Even after a theme is set, you can set a wallpaper regardless
of the set theme. In this case, the other items follow the set
theme.
•For other option menus, see “Common Option Menus” on
page 88.
Downloading Theme Files
“Gallery”
→
“Themes”
→
“Download Themes”
The theme file download site, SmarTone
iN!
, is displayed.
Flash®
Playing Back Flash® Files
“Gallery”
→
“Flash®”
1. Select the file you wish to play back.
To stop playback, press U.
Using Images as Wallpaper
“Gallery”
→
“Flash®”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
Using the Sound Files as a Ringtone
“Gallery”
→
“Flash®”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as Ringtone”.
(M 6-7)
88 Gallery
Other Documents
Some types of files are stored in the Other Documents folder of
the phone. You can edit and use these files as Gallery data.
Opening a Document File
“Gallery”
→
“Other Documents”
1. Select the desired file.
Note
•To switch between viewing handset or memory card content,
select the first item in the options menu.
Tip
•For other option menus, see “Common Option Menus”.
Common Option Menus
For using the desired file type, first select the appropriate folder
in the Gallery menu. Gallery contains the following folders.
“Gallery”
→
“Pictures”
“Gallery”
→
“Videos”
“Gallery”
→
“SD Video”
“Gallery”
→
“Music and Sounds”
“Gallery”
→
“Themes”
“Gallery”
→
“GSX™ & Java™”
“Gallery”
→
“Flash®”
“Gallery”
→
“Other Documents”
Activating Files with Copyright Protection (DRM)
Some pictures, sound files, video clips and theme files have a
digital copy protection program, which is called DRM (Digital
Rights Management). You need to activate the digital licence
permission to open the files. Files protected with DRM are
displayed with .
1. Select the appropriate folder for the desired file type.
2. Highlight the file you wish to activate.
3. Press [Options] and select “Get Contents Key”.
Note
•Some pictures with DRM may not be opened even when an
attempt is made to activate it.
(M 6-8)
Gallery 89
Sending Gallery Data
For details on Infrared and
Bluetooth
wireless technology, see
“Connectivity” on page 141.
1. Select the appropriate folder for the desired file type
(p. 88).
2. Highlight the desired file.
3. Press [Options] and select “Send”.
4. Select “As Message”, “As Email”, “Via Bluetooth”, “Via
Infrared” or “Send via IrSS”.
Tip
•For details on creating a message, see “Creating a New
Message” on page 67.
•For details on Bluetooth settings, see “Bluetooth” on
page 141.
•For details on Infrared settings, see “Infrared” on page 144.
Note
•Pictures/Sounds/Video clips protected by copyright cannot
be sent attached to a message, with the exception of
Separate Delivery files.
•When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Receiving Gallery Data
When the phone receives Gallery data, a confirmation message
is displayed in standby.
1. Press [Yes].
The received data is saved in the corresponding Gallery
folder.
Tip
•For details on Infrared or Bluetooth wireless settings, see
“Connectivity” on page 141.
90 Gallery
Using Gallery Data
You can copy, move, sort, rename, and delete the saved Gallery
data.
1. Select the appropriate folder for the desired file type
(p. 88).
2. Highlight the desired file.
3. Press [Options] and select “Manage Items”.
4. Select the desired option.
“Sort”: Sorts files according to a
specific sequence.
“Rename”: Renames the file or folder.
Select the desired file or folder
to rename.
“Create Folder”: Creates a new folder.
“Change List View”: Changes the list view.
“Check All”: Selects all files in the list.
“Delete all”: Deletes all files in the folder.
Note
•“Manage Items” is not available for “GSX™ & Java™”.
To Delete the File
1. Select the appropriate folder for the desired file type
(p. 88).
2. Highlight the desired file.
3. Press [Options] and select “Delete”.
To See the Gallery Details
1. Select the appropriate folder for the desired file type
(p. 88).
2. Highlight the file you wish to view the details of.
3. Press [Options] and select “Details”.
Gallery 91
Selecting Multiple Files
You can select more than one item from Gallery for moving,
copying, managing and deleting.
Note
•The following procedure applies except when the “Download
More” is highlighted.
1. Select the appropriate folder for the desired file type
(p. 88).
2. Highlight the file you wish to select.
3. Press [Options] and select “Check”.
4. Repeat steps 2 and 3 until you select all the desired files.
Tip
•To remove the check, highlight the file again and select
“Uncheck” in step 3.
•If you wish to unselect all, select “Manage Items” in step 3
and select “Uncheck All”.
•You can quickly check, uncheck, check all or uncheck all
items by using the H, J and L keys.
H: Check/uncheck currently highlighted item.
J: Checks all items in the current folder.
L: Unchecks all checked items in the current folder.
Memory Status
This function helps you to check the memory status of the
handset memory or memory card. Memory status covers the
following.
Handset Memory: Applications, Pictures, Videos,
Sounds, Themes, Flash®, Others,
Total and Free
Memory Card: Pictures, Videos, Sounds, Themes,
Flash®, Others, Total and Free
“Gallery”
→
“Memory Status”
1. Select “Handset Memory” or “Memory Card”.
(M 6-9)
92 Games & Applications
Games & Applications
GSX™ & Java™
The list of Java™ applications is displayed.
Downloaded applications are displayed in order starting from
the latest one.
Downloading Applications
“Games & Applications”
→
“GSX™ & Java™”
→
“Download More”
1. Select the desired application.
Before downloading the application you are asked to
confirm what you are about to receive. After checking the
information on the confirmation screen, the application can
be downloaded.
2. Press B to start downloading.
3. Press B when finished.
Note
•User authentication may be required before downloading the
application on some information screens.
Executing Applications
“Games & Applications”
→
“GSX™ & Java™”
1. Select the title of the application you wish to execute.
The selected application is executed. When using network
connection type applications, connection to the network
can be selected.
2. To end the application, press F and select “End”.
Setting as a Screensaver for the Display
“Games & Applications”
→
“GSX™ & Java™”
1. Highlight the file you wish to use as a screensaver.
2. Press [Options] and select “Set as Screensaver”.
(M 1)
(M 1-1)
Games & Applications 93
Setting Permission
You can set permission for selected Java™ applications.
“Games & Applications”
→
“GSX™ & Java™”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Permission”.
3. Select one of the following options:
“Phone Call”: Sets permission to make voice
calls.
“Network Access”: Sets permission to access the
network.
“Messaging”: Sets permission to perform SMS
messaging.
“Bluetooth Conn.”: Sets permission to connect via
Bluetooth
.
“Local Connection”: Sets permission to connect to local
devices.
“Read User Data”: Sets permission to read user data,
such as Phonebook entries,
mailbox (Inbox) and Gallery data.
“Write User Data”: Sets permission to write entries in
your phone, such as Phonebook
entries, mailbox (Inbox) and
Gallery data.
“Use Multimedia”: Sets permission to use the
multimedia recording.
“Location Access”: Sets permission to send location
information.
4. Select one of the following options:
“Ask Once”: The confirmation message is
displayed the first time network
access is executed.
“Always Ask”: The confirmation message is
displayed every time network
access is executed.
“Never Ask”: The confirmation message is not
displayed while execution of
network access is authorised.
“No”: Execution of network access is not
authorised.
Note
•To clear all the permission settings, select “Reset Settings”
in step 3.
•Some permissions are not available for some Java™
applications.
•“Bluetooth Conn.”, “Read User Data” and “Write User Data”
may not be available in step 3.
94 Games & Applications
Viewing Application Information
You can check the information of Java™ applications.
“Games & Applications”
→
“GSX™ & Java™”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Information”.
Deleting an Application
You can delete an application in the folder.
“Games & Applications”
→
“GSX™ & Java™”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Delete”.
Java™ Settings
Application Volume
You can set the volume of the application such as the sound
effect to one of the five levels or silent. When the profile is set
to “Silent”, the “General Volume” setting (p. 119) has priority.
“Games & Applications”
→
“Java™ Settings”
→
“Application Volume”
1. Press a (or d) to increase the volume or press b (or
c) to decrease the volume and then press B.
Backlight
“Games & Applications”
→
“Java™ Settings”
→
“Backlight”
→
“Switch On/Off”
1. Select from “Always On”, “Always Off” or “Normal
Settings”.
“Always On”: Lit while the application is
operated.
“Always Off”: Unlit while the application is
operated even if a key is pressed.
“Normal Settings”: Works with the main backlight
setting (p. 118).
(M 1-2)
Games & Applications 95
To Set the Blinking Operation
This setting enables the backlight to be controlled by the
application. If set to “Off”, the backlight cannot be turned on
from the application.
“Games & Applications”
→
“Java™ Settings”
→
“Backlight”
→
“Blink”
1. Select “On” or “Off”.
Vibration
When the vibrator is set in the application, you can choose
whether the operation is enabled or disabled.
“Games & Applications”
→
“Java™ Settings”
→
“Vibration”
1. Select “On” or “Off”.
Calls & Alarms
You can set the priority of incoming calls, alarms and
Bluetooth
connection while an application is operating.
“Games & Applications”
→
“Java™ Settings”
→
“Calls
& Alarms”
1. Select “Voice Call”, “Video Calling”, “Incoming
Messages”, “Alarm” or “Start Request.”.
2. Select the desired method.
• “Call Priority”, “Message Priority”, “Alarm Priority” or
“Incoming priority”:
The application is suspended automatically, and you
can receive a call or a message, the alarm will sound or
Bluetooth
connection will start.
After finishing the call or receiving the message, or
when the alarm or
Bluetooth
connection ends, the
suspend indicator ( ) is displayed letting you know
there is a suspended application.
• “Call Notice”, “Message Notice”, “Alarm Notice” or
“Notice of Incoming msg”:
The marquee (character scrolls) is displayed on the first
line of the screen while the application continues. If you
press D, the application is suspended, and you can
receive the call. After finishing the call or receiving the
message, the suspend indicator ( ) is displayed letting
you know there is a suspended application.
96 Games & Applications
Set Java™ Wallpaper
You can set Java™ Wallpaper for the standby screen.
To Switch the Java™ Wallpaper On or Off
“Games & Applications”
→
“Java™ Settings”
→
“Set
Java™ Wallpaper”
→
“Switch On/Off”
1. Select “On” or “Off”.
To Set the Activation Time
“Games & Applications”
→
“Java™ Settings”
→
“Set
Java™ Wallpaper”
→
“Activation Time”
1. Enter an activation time from 1 to 10 seconds (in 2 digits)
using the keypad.
To Set the Suspend Time
“Games & Applications”
→
“Java™ Settings”
→
“Set
Java™ Wallpaper”
→
“Suspend Time”
1. Set the desired time period from “after 15 min.” to “after
6 hours”.
Surround
You can set surround sound for Java™ applications.
“Games & Applications”
→
“Java™ Settings”
→
“Surround”
1. Select “On” or “Off”.
Default Settings
“Games & Applications”
→
“Java™ Settings”
→
“Set
to Default”
1. Enter your handset code.
For details on the handset code, see “Change Handset
Code” on page 126.
Clearing All Memory
“Games & Applications”
→
“Java™ Settings”
→
“Memory All Clear”
1. Enter your handset code.
For details on the handset code, see “Change Handset
Code” on page 126.
Java™ Information
“Games & Applications”
→
“Java™ Information”
The information about the licences belonging to Java™ is
displayed.
(M 1-3)
Organiser 97
Organiser
Calendar
The calendar allows you to easily schedule appointments.
These entries can also be sent via
Bluetooth
wireless
technology to a PC to share the same schedules. When you
exchange entries with other devices, the date and time
displayed may be different to that of the original data
depending on the data format of the receiving device.
Creating a New Entry
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. Select the desired day to which you want to add an
event.
2. Select “Add New Entry”.
3. Enter the subject.
4. Enter the start date and time.
5. Select the desired category.
6. Select the alarm time.
When selecting “Other”, enter the desired alarm date and
time.
7. Press [Save].
Note
•If the date and time settings have not been entered, the date
and time entry screen is displayed (p. 123).
•The alarm will not sound when “General Volume” (p. 119) is
set to “Silent”.
•You can display the Stamp screen by pressing H in the
monthly or 3-month calendar view. Select the desired
category and press [Select].
To Change the Settings
1. Select the item you wish to change in the New Entry
screen.
• “Alarm”: Sets options including “Alarm Time”,
“Assign Tone/Video” and “Duration”
for the reminder.
• “Repeat”: Sets the number of times the alarm
sounds.
• “Location”: Sets the location for the schedule
entry.
• “Description”: Enables entering a memo for the
schedule entry.
• “Secret”: Sets to show or hide the schedule
entry. Set to “On” to make the data
secret or select “Off” to leave it as it
is.
(M 3)
(M 3-1)
98 Organiser
Viewing a Schedule Entry
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. Select the day you wish to view.
2. Select the desired entry.
To Search by Date
1. In any view, press [Options] and select “Go to”.
2. Select “Today” to display today or “Enter Date” to enter
the desired date.
Tip
•You can control the view by using the following:
Monthly, 2-month, 3-month or 6-month view
P: Displays the previous month.
R: Displays the next month.
Q: Displays the Help screen.
H: Displays the Stamp screen (monthly and 3-
month view only).
J: Displays the Set Colour screen.
K: Moves the cursor to today.
L: Displays the Find (By Subject) screen.
N: Displays the Go to (Enter Date) screen.
O: Displays the Find (By Category) screen.
c/d: Moves the cursor to left (the previous day) or to
right (the next day).
a/b: Moves the cursor upward (last week) or
downward (next week).
Weekly view
P: Displays the previous week.
R: Displays the next week.
Q: Displays the Help screen.
J: Displays the Set Colour screen.
K: Moves the cursor to today.
L: Displays the Find (By Subject) screen.
N: Displays the Go to (Enter Date) screen.
O: Displays the Find (By Category) screen.
c/d: Moves the cursor to left (the previous day) or to
right (the next day).
a/b: Moves the weekly view up or down (the previous
hour or next hour).
Setting a Colour
You can highlight a date or days of the week with seven colour
options.
“Organiser”
→
“Tools 1” tab
→
“Calendar”
For Date Colour
1. Press [Options] and select “Calendar Settings”.
2. Select “Set Colour”.
3. Select “By Date” and then select the desired day.
4. Select the desired colour.
Organiser 99
For Days of the Week Colour
1. Press [Options] and select “Calendar Settings”.
2. Select “Set Colour”.
3. Select “By Week” and then select days of the week you
wish to colour.
4. Select the desired colour.
Tip
•The selected date/days are also highlighted on the calendar
on the standby screen.
Note
•If the same date is set with both a date colour and
a day of the week colour, the date is highlighted in the date
colour.
•Up to 100 days can be set for the highlights.
Setting a Holiday
You can set personal holidays in the calendar.
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. Press [Options] and select “Calendar Settings”.
2. Select “Set Holiday”.
3. Enter the name.
4. Enter the date.
5. Select the desired frequency.
6. Press [Save].
100 Organiser
Finding a Schedule Entry
You can search a schedule entry by subject or category.
To Search by a Subject
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. In any view, press [Options] and select “Find”.
2. Select “By Subject”.
3. Enter a few letters of the subject.
Search results are displayed in time order.
To Search by a Category
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. In any view, press [Options] and select “Find”.
2. Select “By Category”.
3. Select a desired category.
Search results are displayed in time order.
Editing a Schedule Entry
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. Select the day you wish to edit.
2. Highlight the entry you wish to edit, press [Options], then
select “Edit”.
3. Select the desired item and modify the entry.
4. Press [Save].
Deleting Schedule Entries
1. In any view, press [Options] and select “Delete”.
2. Select the desired option.
“This Appointment” (daily view):
Deletes the selected entry.
“All This Day”: Deletes all entries for the selected
day.
“All This Month” (monthly view and 3-month view):
Deletes all entries for the selected
month.
“All This 2Months” (2-month view):
Deletes all entries for the selected
two months.
“All This 6Months” (6-month view):
Deletes all entries for the selected six
months.
“All This Week” (weekly view):
Deletes all entries for the selected
week.
“Up to Last Month” (monthly view and 3-month view):
Deletes all entries before the selected
month.
Organiser 101
“Up to Last Week” (weekly view):
Delete all entries before the selected
week.
“All Appointments”: Deletes all entries in this application.
Sending a Schedule Entry
“Organiser”
→
“Tools 1” tab
→
“Calendar”
1. Select the day including schedule entries you wish to
send.
2. Highlight the entry you wish to send, press [Options],
then select “Send”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 141.
For “Via Infrared”
For details, see “Infrared” on page 144.
Note
•When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Receiving a Schedule Entry
When the phone receives a schedule entry, a confirmation
message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Calendar.
Press [No] to reject.
Tip
•For details on entering Infrared or Bluetooth wireless
settings, see “Connectivity” on page 141.
Viewing the Memory Status
1. In any view, press [Options] and select “Memory
Status”.
Alarms
Setting the Alarms
The alarm function allows you to be alerted at a specified time.
Note that you need to set the current date and time before
setting the alarm function if it has not been done already.
“Organiser”
→
“Tools 1” tab
→
“Alarms”
1.
Select the blank line (--:--) you wish to set an alarm to.
2. Enter the desired time.
3. Press [Save].
(M 3-2)
102 Organiser
To Change the Settings
1. Select the item you wish to change in the Set Alarm
screen.
•“Subject”:
Sets the subject for the alarm setting.
• “Repeat”:
Sets the number of times the alarm sounds.
• “Assign Tone/Video”:
Assigns a tone or video clip file to the alarm.
•“Snooze”:
Sets the snooze option.
•“Alarm Volume”:
Sets the desired volume.
The alarm will not sound when “Alarm Volume” is set to
“Silent”.
•“Vibration”:
Sets the vibration pattern of the alarm.
For details on selecting a vibration, see “Vibration” on
page 122.
•“Duration”:
Sets the duration of the alarm.
Resetting an Alarm
“Organiser”
→
“Tools 1” tab
→
“Alarms”
1. Highlight the alarm you wish to reset.
2. Press [Options] and select “Reset Alarm”.
Resetting All Alarms
“Organiser”
→
“Tools 1” tab
→
“Alarms”
1. Select “Clear All”.
Setting for Silent Mode
You can set whether to sound the alarm when the profile is set
to “Silent”.
“Organiser”
→
“Tools 1” tab
→
“Alarms”
→
“Settings”
1. Select “For Silent profile”.
2. Select “Ring” or “Do not Ring”.
Setting the Alarm to the World Clock Time
You can set the alarm to sound according to the time of the
World Clock.
“Organiser”
→
“Tools 1” tab
→
“Alarms”
→
“Settings”
1. Select “Link to World Clk”.
2. Select “On” or “Off”.
Organiser 103
Tasks
You can save your schedule as task entries for a given date or
time.
Creating a New Entry
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Select “Add New Entry”.
2. Enter the subject.
3. Enter the due date and time.
4. Press [Save].
Note
•If the date and time settings have not been entered, the date
and time entry screen is displayed (p. 123).
To Select the Reminder Time
1. On the New Entry screen, select “Reminder”.
2. Select “Reminder Time”.
3. Select the reminder time.
When selecting “Other”, enter the desired reminder date
and time.
To Change the Type of Alarm Tone or Video Clip File
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Preset Sounds”, “Sound Gallery”, “Video
Gallery” or “Flash®”.
4. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a Ringtone
for an Incoming Call” on page 120.
To Change the Duration of Alarm Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Duration”.
3. Select the desired duration.
To Set the Alarm Volume
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Press [Options] and select “Alarm Settings”.
2. Select “Alarm Volume”.
3. Press a to increase the volume or press b to decrease
the volume and then press B.
(M 3-3)
104 Organiser
To Set the Vibration
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Press [Options] and select “Alarm Settings”.
2. Select “Vibration”.
3. Select “On”, “Link to Sound” or “Off”.
To Set for the Silent Mode
You can set whether to sound the alarm when the profile is set
to “Silent”.
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Press [Options] and select “Alarm Settings”.
2. Select “For Silent Profile”.
3. Select “Ring” or “Do not Ring”.
To Set the Priority
1. On the New Entry screen, select “Priority”.
2. Select “Normal”, “High” or “Low”.
To Change the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the task entry.
To Mark the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to mark the data secret or select “Off” to
leave it as it is.
To Unlock the Secret Settings Temporarily
You can show the secret tasks temporarily.
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Highlight the desired entry.
2. Press [Options] and select “Unlock Temporarily”.
Note
•Once the phone has returned to standby, the temporarily
unlocked tasks are reset as secret data.
Marking the Entry as Completed or Uncompleted
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Highlight the desired entry.
2. Press [Options] and select “Done”.
To make the entry incomplete, select “Not Yet”.
Organiser 105
Finding a Task Entry
To Search by a Subject
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Press [Options] and select “Find”.
2. Select “By Subject”.
3. Enter a few letters of the subject and press B.
Search results are displayed in time order.
To Search by a Due Date
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Press [Options] and select “Find”.
2. Select “By Due Date”.
3. Select a desired due date and press B.
Search results are displayed in time order.
Sending a Task Entry
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Highlight the task entry you wish to send.
2. Press [Options] and select “Send”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 141.
For “Via Infrared”
For details, see “Infrared” on page 144.
Note
•When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
106 Organiser
Viewing the Memory Status
“Organiser”
→
“Tools 1” tab
→
“Tasks”
1. Press [Options] and select “Memory Status”.
Deleting Entries
“Organiser”
→
“Tools 1” tab
→
“Tasks”
→
[Options]
→
“Delete”
1. Select the desired option.
“This Task”: Deletes the selected entry.
“All Completed Tasks”: Deletes all entries marked as
“Completed”.
“All Tasks”: Deletes all entries.
Calculator
The calculator function performs the 4 arithmetic calculations
using up to 12 digits.
“Organiser”
→
“Tools 1” tab
→
“Calculator”
Key operations for calculation are as follows:
To enter a decimal point, press P.
To clear the entered number or function, press U.
To do the calculations, press B.
To start a new calculation, press U.
(M 3-4)
Organiser 107
Rate Conversion
You can also use the calculator as a currency calculator to
convert from/to a home currency using a conversion rate that
you enter.
To Set a Currency Conversion Rate
“Organiser”
→
“Tools 1” tab
→
“Calculator”
→
[Options]
→
“Currency Converter”
→
“Exchange Rate”
1. Select “Domestic” or “Foreign”.
2. Enter the currency conversion rate.
To Convert a Value
“Organiser”
→
“Tools 1” tab
→
“Calculator”
1. Enter the value to be converted.
2. Press [Options] and select “Currency Converter”.
3. Select “Convert to Domestic” or “Convert to Foreign”.
Expenses Memo
You can record an expenses memo with pre-defined or edited
categories.
Recording in the Expenses Memo
“Organiser”
→
“Tools 1” tab
→
“Expenses Memo”
→
“Add New Expense”
1. Enter the expenses using the digit keys.
2. Select the desired category.
Expenses memo is registered.
Viewing Totals
“Organiser”
→
“Tools 1” tab
→
“Expenses Memo”
→
“Totals”
Recorded expenses are displayed on the screen.
To Change Category
1. In the total view, highlight the desired item.
2. Press [Options] and select “Change Category”.
3. Select the desired category.
(M 3-5)
(M 3-5-1)
(M 3-5-2)
108 Organiser
To Change Amount
1. In the total view, highlight the desired item.
2. Press [Options] and select “Change Amount”.
3. Enter the desired amount using the digit keys.
To Delete a Recorded Item or All Items
1. In the total view, highlight the desired item.
2. Press [Options] and select “Delete Item” or “Delete All”.
Editing the Category Name
“Organiser”
→
“Tools 1” tab
→
“Expenses Memo”
→
“Edit Category”
1. Select the desired category name.
2. Modify the name.
Stopwatch
You can store 4 lap times when using the stopwatch function.
“Organiser”
→
“Tools 2” tab
→
“Stopwatch”
1. Press [Start].
Press [LAP] to view the lap time before the stopwatch
stops. Last 4 lap times are saved.
2. Press [Stop].
Tip
•You can save a record of lap times and the stop time by
pressing [Options] and selecting “Save to Templates”.
Resetting Time
1. After stopping the stopwatch, press [Options] and select
“Reset”.
(M 3-5-3)
(M 3-
d
-1)
Organiser 109
Countdown Timer
“Organiser”
→
“Tools 2” tab
→
“Countdown Timer”
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press [Start].
Press [Suspend] to pause the countdown.
Press [Resume] to continue counting.
3. When the countdown has finished, press [Stop] and then
press [Start] to start the countdown again.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and
select “Edit”.
2. Modify the desired time.
World Clock
Setting the Time Zone
“Organiser”
→
“Tools 2” tab
→
“World Clock”
1. Press [Edit] and select “Set Time Zone”.
The current time zone is indicated by red line on the world
map.
2. Press c or d to change the time zone.
3. Press B.
To Set the Custom Time Zone
“Organiser”
→
“Tools 2” tab
→
“World Clock”
1. Press [Edit] and select “Set Time Zone”.
2. Press [Original].
3. Enter the desired city name and time difference.
Setting Daylight Saving
“Organiser”
→
“Tools 2” tab
→
“World Clock”
1. Press [Edit] and select “Daylight Saving”.
2. Select “On” or “Off”.
(M 3-
d
-2) (M 3-
d
-3)
110 Organiser
Hour Minder
Hour Minder function informs you of the time by sounding a
tone.
“Organiser”
→
“Tools 2” tab
→
“Hour Minder”
1. Select “Switch On/Off”.
2. Select “On” or “Off”.
3. Select “Select Time”.
4. Select the desired time.
5. Select “Save”.
To Change the Settings
“Organiser”
→
“Tools 2” tab
→
“Hour Minder”
1. Select “Advanced”.
2. Select the item you wish to change.
“Assign Tone/Video”: Sets the tone or video.
“Volume”: Sets the volume of the tone.
“Vibration”: Sets the vibration.
“Duration”: Sets the duration.
“For Silent Profile”: Sets whether to sound the tone
when the profile is set to
“Silent”.
“Link to World Clk”: Sets to sound the tone
according to the time of the
World Clock.
Document Viewer
You can view PC documents.
“Organiser”
→
“Tools 3” tab
→
“Document Viewer”
1. Select the file you wish to view.
To cancel reading, press U or C.
Note
•You can view the following types of files with the document
viewer: PDF (.pdf), Microsoft® Excel® (.xls), Microsoft®
Word (.doc), Microsoft® PowerPoint® (.ppt).
•For the shortcut keys that can be used in the document
viewer, refer to the help by pressing [Options] and selecting
“Help”.
•A file of up to 10 MB can be opened.
•Some files may not be displayed correctly depending on the
type or size, such as a file of vertical text (not supported) or
when the memory runs out while viewing a large document.
•Document files that are saved in Gallery, linked in a WAP/
Web page or attached in a message can be viewed with the
document viewer.
(M 3-
d
-4) (M 3-
d
-
d
-1)
Organiser 111
Text Templates
You can register up to 50 text templates for use in text
messages and multimedia messages. The maximum capacity
of the text templates is 256 characters.
Adding Phrases to Text Templates
“Organiser”
→
“Tools 3” tab
→
“Text Templates”
→
“Add New Template”
1. Enter the text.
2. Select the desired category.
Editing Text Templates
“Organiser”
→
“Tools 3” tab
→
“Text Templates”
1. Highlight the text template you wish to edit.
2. Press [Options] and select “Edit”.
To view the text template, press B.
To delete the text template, press [Options] and select
“Delete”.
3. Modify the text and press B.
Changing the Category
“Organiser”
→
“Tools 3” tab
→
“Text Templates”
1. Highlight the desired text template.
2. Press [Options] and select “Change Category”.
3. Select the desired category.
Sending Text Templates
“Organiser”
→
“Tools 3” tab
→
“Text Templates”
1. Highlight the text template you wish to send.
2. Press [Options] and select “Send Template”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 141.
For “Via Infrared”
For details, see “Infrared” on page 144.
(M 3-
d
-
d
-2)
112 Organiser
Voice Recorder
This allows you to record a voice clip, which can be used to
remind you of schedule entries or be sent within a multimedia
message. The recorded voice clip is saved in Music and
Sounds. Voice clips are saved in .amr format.
Recording a Voice Clip
“Organiser”
→
“Tools 3” tab
→
“Voice Recorder”
1. Press B to start recording.
To stop recording before the recording time is over, press
B.
2. Select “Save” to save the voice clip.
Note
•Press a (or V) or b (or W) to adjust the sound volume
when playing back the recorded file.
Sending Voice Clips
“Organiser”
→
“Tools 3” tab
→
“Voice Recorder”
1. Press B to start recording.
To stop recording before the recording time is over, press
B.
2. Select “Save and Send”.
Selecting the Record Time
“Organiser”
→
“Tools 3” tab
→
“Voice Recorder”
→
[Options]
→
“Record Time”
1. Select “For Message” or “Extended Voice”.
When selecting “Extended Voice”, voice clips are
automatically saved in the memory card.
Selecting Storage Memory
“Organiser”
→
“Tools 3” tab
→
“Voice Recorder”
→
[Options]
→
“Save Recording to”
1. Select the desired location.
When selecting “Choice”, you can select the location when
saving a voice clip.
Phone Help
You can view the help list and use it to guide you in the phone’s
functions.
“Organiser”
→
“Tools 3” tab
→
“Phone Help”
1. Press a or b.
(M 3-
d
-
d
-3)
(M 3-
d
-
d
-4)
SIM Application 113
SIM Application
You can refer to the information on the SIM/USIM card. Contact
your service provider for further details.
(M 10)
114 Settings
Settings
Phone Settings
Setting a Profile
There are 4 profiles: “Normal”, “Car”, “Silent” and “Original”.
Activating a Profile
“Settings”
→
“Phone Settings” tab
→
“Profiles”
1. Select the desired profile.
Note
•When a profile is set, the corresponding indicator described
on page 21 is displayed in standby.
Tip
•In standby, long press R to switch Profiles between Silent
mode and the profile most recently activated.
Resetting Profile Settings
“Settings”
→
“Phone Settings” tab
→
“Profiles”
1. Highlight the profile you wish to reset.
2. Press [Options] and select “Reset”.
3. Enter your handset code.
For details on the handset code, see “Change Handset
Code” on page 126.
Event Light
You can set the Small Light to flash when receiving an incoming
call or a new message.
“Settings”
→
“Phone Settings” tab
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Edit”.
3. Select “Event Light”.
4. Select the desired option.
“For Voice Call”: Flashes when an incoming voice
call is received.
“For Video Calling”: Flashes when an incoming video
calling is received.
“For New Message”: Flashes when a new message is
received.
“Java Start”: Flashes when
Bluetooth
notification is received.
“Delivery Report”: Flashes when a delivery report is
received.
(M 9)
Settings 115
Status Light
You can set the Small Light to flash when you miss any
incoming calls or new messages.
“Settings”
→
“Phone Settings” tab
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Edit”.
3. Select “Status Light”.
4. Select the desired option.
“For Missed Call”: Flashes when an incoming voice
call is missed.
“For New Message”: Flashes when a new message is
missed.
“Java Start”: Flashes when
Bluetooth
notification is missed.
“Delivery Report”: Flashes when a delivery report is
missed.
Any Key Answer
You can answer a call by pressing any key except F, U,
S, [Options] or [Busy]. For details, see page 25.
“Settings”
→
“Phone Settings” tab
→
“Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Edit”.
3. Select “Any Key Answer”.
4. Select “On” or “Off”.
Setting the Display
You can change the display settings.
Setting the Wallpaper
Your phone includes preset pictures to be used as wallpaper in
standby. Pictures taken with the phone’s digital camera or
images downloaded from a WAP site can also be used as
wallpaper.
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“Wallpaper”
1. Select “Vertical” or “Horizontal”.
2. Select the folder in which the picture you wish to set is
contained.
Pictures can be selected from “Preset Pictures”, “Picture
Gallery”, “Flash®”, “Slide W paper” or “Other Documents”.
3. Select the desired picture.
4. After displaying the picture, press B.
Note
•Some pictures cannot be used because of their picture and
data types.
•Wallpaper can be linked to a theme. Select “Link to Theme”
in step 2.
(M 9-2-1)
116 Settings
Assigning Pictures
Pictures can be displayed when turning the power on or off,
when receiving an incoming call, or when operating the alarm.
Pictures taken with the phone’s digital camera or images
downloaded from a WAP site can be used.
To Set Built-in Pictures
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“Assign Pictures”
1. Select the desired function to set the picture to.
2. Select “Preset Animation” when you select “Power On”
or select “Power Off” in step 1.
Select “Pattern 1”, “Pattern 2” or “Pattern 3” when you
select “Incoming”, “Incoming Video Call” or “Alarm” in step
1.
To Set Saved Pictures
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“Assign Pictures”
1. Select the desired function to set the picture to.
2. Select “Picture Gallery”.
3. Select the desired picture.
4. After displaying the picture, press B.
5. Specify the area you wish to display using the navigation
keys, then press B.
Note
•Some pictures cannot be used because of their picture and
data types.
Setting the Font
To Set the Font Size
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“Font Settings”
1. Select “Font Size”.
2. Select the desired font size.
To Set the Font Weight
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“Font Settings”
1. Select “Font Weight”.
2. Select the desired font weight.
Setting the Standby Display
You can set the standby screen display.
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“Standby Display”
1. Select “Clock/Calendar”, “Standby Window”, “Display
icons” or “Show Operator Name”.
(M 9-2-2)
(M 9-2-3)
(M 9-2-4)
Settings 117
Setting the Vivid Mode
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“Vivid Mode”
1. Select the desired mode.
Setting the Greeting Message
You can set the message which is displayed when the phone is
turned on.
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“Greeting Message”
1. Select “Switch On/Off” and then select “On” or “Off”.
Tip
•If you wish to edit the message, select “Edit Message” in
step 1 and enter a message (up to 10 characters).
Setting the External Display
To Select the Backlight Time Out
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“External Display”
→
“Duration”
1. Select the desired time out.
Select “Off” to shut the backlight off.
To Set the Message
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“External Display”
→
“Messages”
1. Select “Display” or “Not Display”.
To Set the Date & Time
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“External Display”
→
“Display
Date&Time”
1. Select the desired display format for the date and time.
To Set the Clock Type
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“External Display”
→
“Clock Type”
1. Select the desired clock type.
To Set Incoming Indication
Caller number or registered caller name can be displayed on
the external display when receiving an incoming call.
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“External Display”
→
“Caller Display”
1. Select “On” or “Off”.
(M 9-2-5)
(M 9-2-6)
(M 9-2-7)
118 Settings
Backlight
The backlight will shut off if you do not press the keypad for a
certain length of time. You can specify a desired time to elapse
before the backlight shuts off, which will help conserve battery
life.
Tip
•When you purchase this phone, Backlight is set to 15
seconds.
To Select the Backlight Time Out
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“Backlight”
→
“Time Out”
1. Select the desired time.
Select “Off” to shut it off.
When selecting “Other”, enter the desired time.
To Adjust the Brightness of the Backlight
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“Backlight”
→
“Brightness”
1. Press a (Light) and b (Dark) to switch between 5
levels of clarity.
2. Press B.
Setting the Display Saving
The screen of this phone will automatically turn off after a given
amount of time. You can change the length of time before the
Display Saving goes into effect, which will help conserve
battery life.
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“Display Saving”
1. Select the desired time.
When you purchase this phone, Display Saving is set to 2
minutes.
Note
•Display Saving does not work while you are using WAP or an
application.
•To cancel the Display Saving: The display saving continues
until either a key is pressed or there is an incoming alert. The
first key press only cancels this function. You must press
another key in order to enter any numerical or text value.
(M 9-2-8) (M 9-2-9)
Settings 119
Setting the Dial Number
You can set the type of number which is displayed when
making a call.
“Settings”
→
“Phone Settings” tab
→
“Display
Settings”
→
“Dial Number”
1. Select the desired type of dial number.
Themes
You can easily customise the display by using the theme files.
The theme files downloaded from a WAP site can be used.
“Settings”
→
“Phone Settings” tab
→
“Themes”
1. Select “Preset Themes” or “My Themes”.
2. Select the desired theme file.
Tip
•Even after a theme is set, you can set a wallpaper regardless
of the set theme. In this case, the other items follow the set
theme.
Sound Settings
You can use this menu to check or edit the current profile
settings (except “Any Key Answer”).
“Settings”
→
“Phone Settings” tab
→
“Sound
Settings”
Volume
You can adjust the volume for incoming voice calls, SMS/MMS/
Email messages and other sounds to one of six levels.
“Settings”
→
“Phone Settings” tab
→
“Sound
Settings”
1. Select “Volume”.
2. Select “For Incoming Call”, “For New Message”, “Java
Start”, “Delivery Report” or “General Volume”.
3. Press a (or d) to increase the ringer volume or press
b (or c) to decrease the ringer volume and then press
B.
To select “Silent”, press b (or c) at level 1.
(M 9-2-10)
(M 9-3)
(M 9-4)
120 Settings
Assigning a Ringtone for an Incoming Call
You can set a ringtone for incoming voice calls and video
callings. You can select from different tones including patterns,
sound effects and melodies or set a sound in Saved Sounds as
the default ringtone.
“Settings”
→
“Phone Settings” tab
→
“Sound
Settings”
1. Select “Ringtone/Ringvideos”.
2. Select “For Voice Call” or “For Video Calling”.
3. Select “Preset Sounds”, “Sound Gallery” or “Flash®
Ringtones”.
4. Highlight the ringtone you wish to use.
To hear the demo play, press [Play].
5. Press B.
Note
•Even if you delete a sound that is being used as a ringtone,
the setting remains the same and the default ringtone
sounds.
•Melodies can be selected from “Sound Gallery”, “Preset
Sounds” or “Flash® Ringtones”.
Assigning a Ring Video Clip for an Incoming Call
You can set a ring video clip for incoming voice calls and video
callings. You can set a video clip in Saved Videos as the default
ring video clip.
“Settings”
→
“Phone Settings” tab
→
“Sound
Settings”
1. Select “Ringtone/Ringvideos”.
2. Select “For Voice Call” or “For Video Calling”.
3. Select “Video Gallery”.
4. Highlight the ring video clip file you wish to use.
To preview the file, press [Options] and select “Play”.
5. Press B.
Settings 121
Notification
When receiving messages,
Bluetooth
notification or delivery
reports, your phone will notify you of their arrival with the
ringtone or ring video clip you specify.
“Settings”
→
“Phone Settings” tab
→
“Sound
Settings”
1. Select “Ringtone/Ringvideos”.
2. Select “For New Message”, “Java Start” or “Delivery
Report”.
3. Select “Assign Tone”.
4. Select the desired folder.
5. Highlight the desired ringtone or ring video clip.
For details on selecting a ringtone or a ring video clip, see
“Assigning a Ringtone for an Incoming Call” or “Assigning
a Ring Video Clip for an Incoming Call” on page 120.
6. Press B.
7. Select “For New Message”, “Java Start” or “Delivery
Report”.
8. Select “Set Play Point”.
9. Select the desired play point.
10. Select “For New Message”, “Java Start” or “Delivery
Report”.
11. Select “Duration”.
12. Enter the desired duration of message notification in 2
digits using the digit keys.
Keypad Tones
When the keypad tone is set on, you will hear a confirmation
tone each time you press any key.
“Settings”
→
“Phone Settings” tab
→
“Sound
Settings”
→
“System Sounds”
→
“Keypad Tones”
1. Select the desired tone pattern.
Warning Tone
Your phone can be set to emit a warning tone when an error
occurs.
“Settings”
→
“Phone Settings” tab
→
“Sound
Settings”
→
“System Sounds”
→
“Warning Tone”
1. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Sound
Gallery”.
For “Duration”, select the desired time.
122 Settings
Power On/Off Sound
Your phone can be set to emit a sound when it is switched on
or off.
“Settings”
→
“Phone Settings” tab
→
“Sound
Settings”
→
“System Sounds”
1. Select “Power On Sound” or “Power Off Sound”.
2. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Sound
Gallery”.
For “Duration”, enter the desired duration of sound in 2
digits using the digit keys.
Handset Open/Close Sound
Your phone can be set to emit a sound when it is opened or
closed.
“Settings”
→
“Phone Settings” tab
→
“Sound
Settings”
→
“System Sounds”
1. Select “Handset Open” or “Handset Close”.
2. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Sound
Gallery”.
For “Duration”, select the desired time.
Charge Full
Your phone can be set to emit a sound when it is fully charged.
“Settings”
→
“Phone Settings” tab
→
“Sound
Settings”
→
“System Sounds”
→
“Charge Full”
1. Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “Sound
Gallery”.
For “Duration”, select the desired time.
Vibration
“Settings”
→
“Phone Settings” tab
→
“Sound
Settings”
→
“Vibration”
1. Select “For Incoming Call”, “For New Message”, “Java
Start” or “Delivery Report”.
2. Select “Switch On/Off” and then select “On” or “Link to
Sound” to activate.
3. Select “Vibration Pattern” and then select the desired
vibration pattern.
Tip
•When you select “On” for “For Incoming Call”, “ ” is
displayed in standby.
Settings 123
Surround Sound
You can set surround sound.
“Settings”
→
“Phone Settings” tab
→
“Sound
Settings”
1. Select “Surround”.
2. Select “On”, “Link to Sound” or “Off”.
Date & Time
You need to set the correct time and date in order for your
phone’s various time-based functions to work correctly.
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Set Date/Time”
1. Enter the day, month, year and time using the digit keys.
Tip
•When you enter the time in the 12-hour format, press a or
b to switch between am and pm. The order in which the
date and time is displayed is based on the format setting.
To Set Daylight Saving
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Daylight Saving”
1. Select “On” or “Off”.
To Set the Time Zone
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Set Time Zone”
1. Press c or d to select the home city to set.
2. Press B.
To Customise the Time Zone
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Set Time Zone”
1. Press [Original].
2. Enter the city name.
3. Enter the time-zone differences using the digit keys.
Press a or b to switch between − and +.
4. Press B.
World Clock
For details, see page 109.
To Select the Time Format
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Time Format”
1. Select “24 Hour” or “12 Hour”.
(M 9-5)
(M 9-5-2)
(M 9-5-4)
(M 9-5-5)
124 Settings
To Select the Date Format
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Date Format”
1. Select from “D-M-Y”, “M-D-Y” or “Y-M-D”.
To Select the Calendar Format
“Settings”
→
“Phone Settings” tab
→
“Date & Time”
→
“Calendar Format”
1. Select “Sunday-Saturday” or “Monday-Sunday”.
Language Setting
You can change the language displayed on the phone.
“Settings”
→
“Phone Settings” tab
→
“Language”
1. Select the desired language.
Tip
•You can also change the input language on the text entry
screen (p. 33).
Note
•If you select “Automatic” in step 1, the language preset on
the SIM/USIM card is selected.
•If the language preset on the SIM/USIM card is not
supported, then the default language of the phone is
selected.
Display Rotation
You can assign a function to activate automatically when the
display is rotated to the cycloid position in standby.
“Settings”
→
“Phone Settings” tab
→
“Display
Rotation”
1. Select “Rotation 90°to”.
2. Select the desired function.
To Set for Answering Incoming Calls
You can answer incoming calls by rotating the display to the
portrait position from the cycloid position.
“Settings”
→
“Phone Settings” tab
→
“Display
Rotation”
1. Select “Answer calls”.
2. Select “Portrait: Answer call.”.
Setting the Sound Output
“Settings”
→
“Phone Settings” tab
→
“Switch ringtone
output”
1. Select “Earphone only” or “Earphone + speaker”.
(M 9-5-6)
(M 9-5-7)
(M 9-6)
(M 9-7)
(M 9-8)
Settings 125
Change Menu
You can change the type of menu to display.
“Settings”
→
“Phone Settings” tab
→
“Change Menu”
1. Select “Standard Menu” or “Large Font Menu”.
Security Settings
You can set various locks on your phone such as PIN Entry and
Handset Lock.
“Settings”
→
“Phone Settings” tab
→
“Security
Settings”
Enabling/Disabling the PIN Code
If the PIN code is enabled, you are asked to enter the PIN code
each time the phone is switched on. Your PIN code is registered
on the SIM/USIM card and you should have been made aware
of the code when you purchased the SIM/USIM card. Contact
your service provider for further details.
Select “On” for “PIN Entry” and enter your PIN code if you wish
to activate the PIN lock.
Note
•If you enter the wrong PIN code three times, the SIM/USIM
card will lock. To remove the lock, contact your service
provider or SIM/USIM card vendor.
To Change the PIN Code
This allows you to change the PIN code registered on the SIM/
USIM card. Before you change the PIN code, select “On” for
“PIN Entry”.
Enter the existing PIN code for “Change PIN” after selecting
“PIN Entry”, and enter a new PIN code twice.
To Change the PIN2 Code
PIN2 is a second PIN code used to unlock certain features of a
SIM/USIM card, such as Fixed Dialling and Call Cost metering.
Not all SIM/USIM cards use the PIN2 code. This menu may not
be displayed depending on the type of your SIM/USIM card.
Enter the existing PIN2 code for “Change PIN2”, and enter a
new PIN2 code twice.
Handset Lock
The Handset Lock prevents unauthorised use of the phone or
certain features on the phone when the power is turned on. By
setting this option on, your phone or certain features on your
phone are locked until the correct handset code is entered.
Select “On” for “Handset Lock” if you wish to activate the
Handset Lock.
(M 9-10)
(M 9-11)
126 Settings
Function Lock
By setting this option on, all the functions of your phone will be
locked until the correct handset code is entered.
Enter your handset code after selecting “Auto”, “Once”, “At
Power on” or “Off”.
To Turn Off the Function Lock
Enter your handset code in standby to turn the Function Lock
off.
Phonebook Lock
The Phonebook Lock function prevents unauthorised use of
your Phonebook.
Select “On” to lock or “Off” to unlock for “Phonebook Lock” and
enter your handset code.
For details on the handset code, see “Change Handset Code”.
History Lock
The History Lock function prevents unauthorised access to Call
Log and sent/received mail records. By setting this option on,
Call Log and sent/received mail records cannot be viewed until
the correct handset code is entered.
Select “Call Log” or “Sent/Rcvd Msg.”, and then select “On” to
lock or “Off” to unlock.
Showing Secret Data
By setting this option on, the hidden data can be displayed.
Select “On” to display or “Off” to hide for “Show Secret Data”.
Enter your handset code when you select “On”.
For details on the handset code, see “Change Handset Code”.
Change Handset Code
The default handset code is “9999”.
Select “Change Handset Code” and enter the old handset code,
then enter a new handset code twice.
Settings 127
Master Reset
You can return the settings for M1 to M12 to the default
settings.
“Settings”
→
“Phone Settings” tab
→
“Master Reset”
→
“Reset Settings”
1. Enter your handset code.
For details on the handset code, see “Change Handset
Code” on page 126.
Note
•Some settings are not deleted by this function. Data stored
in Phonebook, etc. is not deleted.
To Reset All Settings for M1 to M12 and Delete All Created
Data
“Settings”
→
“Phone Settings” tab
→
“Master Reset”
→
“Reset All”
1. Enter your handset code.
For details on the handset code, see “Change Handset
Code” on page 126.
Call/Video Call
Voicemail & Diverts
This service can be used to divert incoming calls that you
cannot answer. Calls can be diverted to another phone number
or to your Voicemail system.
Note
•This service may not be available on all mobile phone
networks. Contact your service provider for more
information.
(M 9-12)
(M 9-12-2)
(M 9-
d
-1)
128 Settings
To Access the Voicemail Centre
1. Long press G in standby.
To Activate the Voicemail Service
“Settings”
→
“Call/Video Call” tab
→
“Voicemail &
Diverts”
→
“Voicemail”
→
“Activate”
1. Select one of the following options:
“Always”: Diverts all calls without ringing.
“When Busy”: Diverts incoming calls while you
are talking on the phone.
“No Answer”: Diverts incoming calls if you do not
answer a call within a certain
period of time.
“Not Reachable”: Diverts incoming calls when your
phone has no network service or is
switched off.
If you select “No Answer”, select the period of time from 6
levels (05 to 30 seconds).
2. Press B.
To Activate the Diverts Service
Select the appropriate option.
“Settings”
→
“Call/Video Call” tab
→
“Voicemail &
Diverts”
→
“Diverts”
1. Select “Activate” or “By Service”.
If you select “By Service”, you can select further divert
options.
2. Select from “Always”, “When Busy”, “No Answer” or
“Not Reachable”.
If you select “No Answer”, select the period of time from 6
levels (05 to 30 seconds).
3. Enter a phone number to which you wish to divert calls
or search for it in the Phonebook (p. 45).
4. Press B.
Note
•When “Voice Calls” diverts are set to “Always”, “ ” is
displayed in standby.
Settings 129
To Check the Diverts Status
“Settings”
→
“Call/Video Call” tab
→
“Voicemail &
Diverts”
→
“Status”
1. Select the diverts option you wish to check.
To Deactivate the Diverts Service
Select the appropriate option.
“Settings”
→
“Call/Video Call” tab
→
“Voicemail &
Diverts”
→
“Deactivate”
1. Select from “Always”, “When Busy”, “No Answer” or
“Not Reachable”.
2. Press B.
To Cancel the Diverts and Voicemail Service
Once you have changed the diverts settings, you can cancel
them all with this service.
“Settings”
→
“Call/Video Call” tab
→
“Voicemail &
Diverts”
→
“Cancel All”
Video Calling Settings
Set various types of functions and services for video callings.
To Select an Image for the Alternative Image
You can select an image shown to the other party between the
camera image and an alternative image from the saved picture
files.
“Settings”
→
“Call/Video Call” tab
→
“Video Calling
Settings”
→
“Camera Picture”
1. Select “Default Image” or “Alternative Image”.
For “Default Image”, select “Alternative Image” or “External
Camera”.
For “Alternative Image”, select “Preset Picture”, “Picture
Gallery” or “Theme”.
To Select the Picture Quality
Select the desired data format for your environment.
“Settings”
→
“Call/Video Call” tab
→
“Video Calling
Settings”
→
“Incoming Picture Quality”
“Settings”
→
“Call/Video Call” tab
→
“Video Calling
Settings”
→
“Outgoing Picture Quality”
1. Select “Normal”, “Quality Priority” or “Frame Rate
Priority”.
Select “Frame Rate Priority” to perform faster
communication.
(M 9-
d
-2)
130 Settings
To Assign Hold Guidance Picture
You can display an image saved in the phone on your display
while you are putting a call on hold.
“Settings”
→
“Call/Video Call” tab
→
“Video Calling
Settings”
→
“Hold Guidance Picture”
1. Select “Preset Picture”, “Picture Gallery” or “Theme”.
2. Select the desired picture.
To Set the Backlight
With this setting on, the phone’s backlight is on when making
a video calling.
“Settings”
→
“Call/Video Call” tab
→
“Video Calling
Settings”
→
“Backlight”
1. Select “Always On”, “Always Off” or “As Normal
Setting”.
The “As Normal Setting” option depends on the backlight
setting of the display (p. 118).
To Turn On or Off the Speaker
“Settings”
→
“Call/Video Call” tab
→
“Video Calling
Settings”
→
“Loudspeaker”
1. Select “On” to turn on the loudspeaker or select “Off” to
turn it off.
To Mute the Microphone
You can mute the microphone while making a video calling.
“Settings”
→
“Call/Video Call” tab
→
“Video Calling
Settings”
→
“Mute Microphone”
1. Select “On” to mute or “Off” to cancel mute.
To Set the Remote Monitor
You can set the phone to answer video calls automatically.
“Settings”
→
“Call/Video Call” tab
→
“Video Calling
Settings”
→
“Remote Monitor”
1. Enter your handset code.
2. Select “Switch On/Off”.
3. Select “On” or “Off”.
Settings 131
To Set the Auto Answer List
Register phone numbers to the Auto Answer list.
“Settings”
→
“Call/Video Call” tab
→
“Video Calling
Settings”
→
“Remote Monitor”
1. Enter your handset code.
2. Select “Auto Answer List”.
3. Select a blank field.
4. Enter the desired number.
To Set the Answer Time
“Settings”
→
“Call/Video Call” tab
→
“Video Calling
Settings”
→
“Remote Monitor”
1. Enter your handset code.
2. Select “Answer Time”.
3. Enter the time from 1 to 30 seconds.
Showing Your Number
This lets you control whether to show your phone number when
calling another party or not.
“Settings”
→
“Call/Video Call” tab
→
“Show Your
Number”
1. Select “On”, “Off” or “Status”.
Note
•Some networks do not support this service. Please check
with your service provider for availability.
Restrict Calls
This function lets you place restrictions on incoming and
outgoing calls. To activate this option you will need the
specified password, which is available from your service
provider.
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
“Outgoing Calls”: Restricts outgoing calls.
“Incoming Calls”: Restricts incoming calls.
(M 9-
d
-3)
(M 9-d-4)
132 Settings
2. Select one of the following options:
(For “Outgoing Calls”)
“Bar All Outgoing Calls”: Restricts all outgoing calls
except emergency calls.
“Bar International Calls”: Restricts all outgoing
international calls.
“Only Local & Home”: Restricts all outgoing
international calls except to your
home country.
(For “Incoming Calls”)
“Bar All Incoming Calls”: Restricts all incoming calls.
“Bar if Abroad”: Restricts all incoming calls when
you are outside of the coverage
from your registered service
provider.
3. Select one of the following options:
“All Services”: Restricts all services.
“Voice Calls”: Restricts all voice calls.
“Video Callings”: Restricts all video callings.
“Fax”: Restricts all fax calls.
“Messages”: Restricts all messages.
4. Select “On”, “Off” or “Status”.
5. Enter the network password.
To Cancel Settings
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
2. Select “Cancel All”.
3. Enter the network password.
Fixed Dialling Numbers
This option is available on most SIM/USIM cards for mobile
phones. It allows you to configure a SIM/USIM card so that it
can only be used to make calls to numbers on a predefined list.
Note
•This service depends on the SIM/USIM card.
To Enable Fixed Dialling Numbers
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
→
“FDN”
1. Enter your PIN2 code.
2. Select “Switch On/Off”.
3. Select “On” to enable this function.
Settings 133
To Add a New Name
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
→
“FDN”
1. Enter your PIN2 code.
2. Select “Edit Dial List”.
3. Select a blank field.
4. Add a name and a phone number.
For details on adding a name and phone number, see
“Adding a New Entry” on page 44.
5. Press [Save].
Rejecting an Incoming Call
You can register phone numbers you do not wish to answer.
To Reject the Registered Number
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
→
“Rejected Numbers”
→
“Switch On/Off”
1. Select “On” or “Off”.
To Register the Rejected Number
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
→
“Rejected Numbers”
→
“Set Rejecting Number”
1. Select a blank field.
2. Enter the desired number.
Rejecting a Call when the Caller’s Number is Withheld
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
→
“Withheld Call”
1. Select “On” or “Off”.
Changing the Network Password
“Settings”
→
“Call/Video Call” tab
→
“Restrict Calls”
→
“Change N/W Password”
1. Enter the old network password.
2. Enter a new network password.
3. Enter the new network password again.
If you enter the incorrect password, you are asked to enter
the password again.
4. Press B.
134 Settings
Minute Minder
Minute Minder function informs you of your talk time by
sounding a tone after every minute.
“Settings”
→
“Call/Video Call” tab
→
“Minute Minder”
1. Select “On” or “Off”.
Auto Answer
You can set the phone to answer voice calls automatically.
“Settings”
→
“Call/Video Call” tab
→
“Auto Answer”
1. Enter your handset code.
2. Select “Switch On/Off”.
3. Select “On” or “Off”.
To Set the Answer Time
“Settings”
→
“Call/Video Call” tab
→
“Auto Answer”
1. Enter your handset code.
2. Select “Answer Time”.
3. Enter the time from 1 to 30 seconds.
Call Waiting
Note
•This service may not be available on all mobile phone
networks. Contact your service provider for more
information.
If you wish to be able to receive another incoming call while you
have a call in progress, you must activate the Call Waiting
service.
“Settings”
→
“Call/Video Call” tab
→
“Call Waiting”
1. Select “On”, “Off” or “Status”.
Display Call Timer
“Settings”
→
“Call/Video Call” tab
→
“Display Call
Timer”
1. Select “On” or “Off”.
(M 9-
d
-5)
(M 9-d-6)
(M 9-
d
-7)
(M 9-d-8)
Settings 135
Display Call Cost
“Settings”
→
“Call/Video Call” tab
→
“Display Call
Cost”
1. Select “On” or “Off”.
Auto Redial
“Settings”
→
“Call/Video Call” tab
→
“Auto Redial”
1. Select “On” or “Off”.
Network Settings
To Select a Service Automatically
Each time the power is turned on, your phone selects a service
automatically.
“Settings”
→
“Network Settings” tab
→
“Network
Settings”
→
“Select Service”
1. Select “Auto”.
To Select a Network Automatically
Each time the power is turned on, your phone always tries to
connect to the preferred network.
If your phone is not connected to the network, you can perform
the following immediately to establish the preferred network
connection.
“Settings”
→
“Network Settings” tab
→
“Network
Settings”
→
“Select Network”
→
“Automatic”
To Select the Network Manually
“Settings”
→
“Network Settings” tab
→
“Network
Settings”
→
“Select Network”
→
“Manual”
1. Select the desired network.
To Add a New Network
“Settings”
→
“Network Settings” tab
→
“Network
Settings”
→
“Select Network”
→
“Add New Network”
If there are no entries, press B and go to step 2.
If there is an entry, press B and perform the following steps.
1. Select “Add”.
2. Enter the country code (up to 3 digits).
3. Enter the network code (up to 3 digits).
4. Enter a new network name (up to 25 characters).
5. Enter either 2G (GSM) or 3G for the network type.
To Edit the Preferred List
“Settings”
→
“Network Settings” tab
→
“Network
Settings”
→
“Select Network”
→
“Set Preferred”
1. Select the name of the network you wish to edit.
2. Select “Insert” to insert over the selected position, “Add
to end” to insert at the end or “Delete” to delete.
(M 9-
d
-9)
(M 9-d-10)
(M 9-d-d-1)
136 Settings
Showing the Network Information
“Settings”
→
“Network Settings” tab
→
“Network
Settings”
→
“Network Information”
Information about the operator is displayed.
Off Line Mode
When the Off Line Mode is set to “On”, the phone cuts off the
network connections and stops searching for available
networks to connect. With this mode, you can play games or
music even when you fly.
“Settings”
→
“Network Settings” tab
→
“Off Line
Mode”
1. Select “On” or “Off”.
Internet Settings
Note
•In normal operations, you do not need to change the
settings.
•Internet settings have already been entered in your phone
depending on your service provider. You may have
restrictions on viewing, deleting, copying or modifying the
settings. Contact your service provider for details.
Browser Settings
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Browser Settings”
→
“Create New”
“Profile Name”: Browser profile name (unique
name)
“Proxy”: Proxy setting for Browser (when
“Use Proxy” is On)
“Access Point”: Access point for Browser (when
“Use Proxy” is Off)
“Use Proxy”: Setting to connect by Proxy or
not
“Home”: Home page URL (when “Use
Proxy” is Off)
Java™ Settings
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Java™ Settings”
→
“Create New”
“Profile Name”: Profile name for Java™
application (unique name)
“Proxy”: Proxy setting for Java™
application (when “Use Proxy” is
On)
“Access Point”: Access point for Java™
application (when “Use Proxy” is
Off)
“Use Proxy”:
Setting to connect by Proxy or not
(M 9-
d
-
d
-2)
(M 9-d-d-3)
(M 9-
d
-
d
-3-1)
(M 9-d-d-3-2)
Settings 137
Streaming Settings
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Streaming Settings”
→
“Create New”
“Profile Name”: Profile name for streaming
(unique name)
“Proxy Address”: Proxy address
“Proxy Port Number”: Port number (1-65535)
“Access Point”: Access point
Proxy Settings
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Proxy Settings”
→
“Create New”
“Proxy Name”: Proxy name (unique name)
“Proxy Address”: IP address
“Access Point”: Access point
“Home”: Home page URL
“Port Number”: Port number (1-65535)
“
Authentication Type
”: Authentication type
(“HTTP-BASIC” or
“HTTP-DIGEST”)
“User Name”: User name for authentication
“Password”: Password for authentication
Access Point Settings
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Access Point Settings”
→
“Create New”
“Access Point Name”: Access point name (unique
name)
“APN”: APN setting
“
Authentication Type
”: Authentication type (“NONE”,
“PAP” or “CHAP”)
“User Name”: User name for access point
“Password”: Password for access point
“DNS”: DNS (Domain Name System)
“Linger Time”: Linger Time (1-99999 sec.)
Re-provisioning Settings
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Re-provisioning Settings”
→
“Execute
Pending”
(M 9-
d
-
d
-3-3)
(M 9-d-d-3-4)
(M 9-
d
-
d
-3-5)
(M 9-d-d-3-6)
138 Settings
Clearing DNS Cache
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
→
“Clear DNS Cache”
To Activate the Browser/Java™/Streaming Profile
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
1. Select “Browser Settings”, “Java™ Settings” or
“Streaming Settings”.
2. Select the desired profile you wish to activate.
To Edit/Copy/Delete the Browser/Java™/Streaming/Proxy/
Access Point Profile
“Settings”
→
“Network Settings” tab
→
“Internet
Settings”
1. Select “Browser Settings”, “Java™ Settings”,
“Streaming Settings”, “Proxy Settings” or “Access Point
Settings”.
2. Highlight the desired profile.
3. Press [Options] and select the desired option.
“Edit”: Modify the desired item.
“Copy”: Enter the new file name.
“Delete”: Press [Yes] to delete.
(M 9-
d
-
d
-3-7)
Call Log 139
Call Log
The phone will record the last 30 missed calls, received calls
and dialled numbers.
Viewing Call Log
“Call Log”
1. Select from “All Calls”, “Dialled Numbers”, “Missed
Calls” or “Received Calls”.
The selected call log list is displayed.
To switch logs, press c or d.
2. Select the phone number you wish to view.
If you wish to dial the number, press D to make a voice
call or long press D to make a video calling.
Tip
•You can also confirm call logs by pressing D in standby.
Sending Messages
1. In the call log list, highlight the phone number or name
you wish to send a message to.
2. Press [Options] and select “Create Message”.
For details on creating a message, see “Creating a New
Message” on page 67.
Deleting a Call Log
1. In the call log list, press [Options] and select “Delete” or
“Delete All”.
Call Timers
This function lets you check the duration of your calls.
Checking the Duration of the Last Call and All Calls
“Call Log”
→
“Call Timers”
1. Select “Received Calls” or “Dialled Calls”.
Resetting Call Timers
“Call Log”
→
“Call Timers”
→
“Clear Timers”
1. Enter your handset code.
For details on the handset code, see “Change Handset
Code” on page 126.
(M 11) (M 11-5)
(M 11-5-3)
140 Call Log
Call Costs
This function lets you check the charges for your calls.
Some
networks do not support Charging Advice. Please check with
your service provider for availability.
Checking the Cost of the Last Call
“Call Log”
→
“Call Costs”
→
“Last Call”
Checking the Total Call Cost
“Call Log”
→
“Call Costs”
→
“All Calls”
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
“Call Log”
→
“Call Costs”
→
“Cost Units”
→
“Set
Units”
1. Enter your PIN2 code.
2. Enter a currency unit (up to 3 characters).
3. Enter a cost per unit.
To enter a decimal point, press P.
Setting the Charge Limit
This function is useful if you wish to make sure you do not
exceed a certain charge limit.
“Call Log”
→
“Call Costs”
→
“Max Cost”
→
“Set Limit”
1. Enter your PIN2 code.
2. Enter a value.
Checking the Residual Credit
“Call Log”
→
“Call Costs”
→
“Residual Credit”
Resetting All Call Costs
“Call Log”
→
“Call Costs”
→
“Clear Costs”
1. Enter your PIN2 code.
Data Counter
You can confirm the number of bytes used in the 3G (UMTS)
and GSM transmission.
“Call Log”
→
“Data Counter”
1. Select from “Last Data” or “All Data”.
Resetting All Data Counter
“Call Log”
→
“Data Counter”
→
“Clear Counter”
(M 11-6)
(M 11-6-1)
(M 11-6-2)
(M 11-6-5)
(M 11-6-6)
(M 11-6-3)
(M 11-6-4)
(M 11-7)
(M 11-7-3)
Connectivity 141
Connectivity
By configuring the settings in this menu, you can connect to
Bluetooth
wireless technology or infrared enabled phones, as
well as PCs (USB connection is possible using Data Cable
accessory).
Bluetooth
For using the
Bluetooth
wireless function, you need to search
for other
Bluetooth
wireless technology enabled devices to
establish contact with your phone. Keep your phone within a
distance of 10 metres from the devices before searching.
Using the Bluetooth Wireless Function
To Turn On or Off the Bluetooth Wireless
Function
“Connectivity”
→
“Bluetooth”
→
“Switch On/Off”
1. Select “On” or “Off”.
When “On” is selected, the
Bluetooth
wireless setting is
activated, and “ ” is displayed.
To Search for Devices to be Paired
A maximum of 16 devices can be searched for.
“Connectivity”
→
“Bluetooth”
→
“Search for Devices”
1. Select the desired device for pairing.
2. Enter the device passcode.
Note
•You can search for devices even when the Bluetooth wireless
function is off. Once pairing is started, the phone turns the
Bluetooth wireless function on automatically.
•You can only select one device for pairing. To change the
paired device, see “To Activate the Paired Device” on
page 142.
•Pairing means authentication has been established between
the two devices.
•In order to pair two devices with Bluetooth wireless
technology, the users should agree on the same passcode
for both devices.
•The passcode is used only once, so there is no need to
remember it. The passcode can be different each time the
devices are connected.
•Devices that do not have a user interface (i.e., headsets and
car kits) have a factory-set passcode. See the user guide for
the device.
(M 12)
(M 12-1)
(M 12-1-1)
(M 12-1-2)
142 Connectivity
Tip
•You can save battery power by turning the Bluetooth wireless
function off while it is not in use. Turn the Bluetooth wireless
function off in “To Turn On or Off the Bluetooth Wireless
Function” on page 141 or in “To Turn Off Automatically” on
page 144.
•During a call, you can divert voice calls to the paired
handsfree device. Press [Options], select “Transfer Audio”
and then “To Handset” or “To Bluetooth”.
To Activate the Paired Device
Paired devices are listed by tabs for all devices for handsfree
devices and for Audio devices.
“Connectivity”
→
“Bluetooth”
→
“Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Select the desired device you wish to activate.
To Check the Paired Handsfree Devices
“Connectivity”
→
“Bluetooth”
→
“Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Highlight the desired handsfree device.
3. Press [Options] and select “Set prior Connect”.
To Check the Audio Device
“Connectivity”
→
“Bluetooth”
→
“Paired Devices”
1. Press d twice to switch to the list for Audio devices.
2. Highlight the desired Audio device.
3. Press [Options] and select “Set prior Connect”.
To Rename or Delete the Paired Devices
“Connectivity”
→
“Bluetooth”
→
“Paired Devices”
1. Press c or d to switch between all paired devices and
handsfree devices.
2. Highlight the desired device.
3. Press [Options].
4. Select “Change Name” or “Delete”.
You can rename or delete by pressing B after selecting
desired device.
Connectivity 143
To Send All Data to Other Devices
You can send all the data for applications such as Phonebook,
Calendar, Tasks to selected devices.
“Connectivity”
→
“Bluetooth”
→
“Send All”
1. Select the desired device.
If a device is not specified, searching starts automatically.
2. Enter your handset code.
For details on the handset code, see “Change Handset
Code” on page 126.
3. Select the desired data to send.
4. Enter the device passcode for unpaired devices.
Note
•If the handsfree device is connected, the confirmation
screen to deactivate the handsfree function is displayed.
Press [Yes] to deactivate.
Bluetooth Wireless Settings
With this setting you can rename your phone, prevent other
devices from recognising your phone and turn the
Bluetooth
wireless function off automatically to save battery power, etc.
To Rename Your Phone
You can rename your phone. The name is shown on other
devices when your phone is detected.
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Device Name”
1. Enter the new device name.
To Show or Hide Your Phone
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Visibility”
1. Select the desired visibility settings.
“Show My Phone”: Allows other devices to
recognise your phone.
“Hide My Phone”: Hides your phone from other
devices.
To Select the Sound Output
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Sound Output”
1. Select “Phone/Earphone” or “Bluetooth Device”.
(M 12-1-4) (M 12-1-5)
144 Connectivity
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two
modes; talking with the handsfree kit or talking with the phone.
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Handsfree Setting”
1. Select “Handsfree mode” or “Private mode”.
“Handsfree mode”: For talking with the handsfree kit
“Private mode”: For talking with the phone
To Set Java™ Application Request
You can set whether to accept Java™ application requests
from other devices.
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Java™ Application Request”
→
“Switch On/Off”
1. Select “On” or “Off”.
To View the Last Received Java™ Application Request
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Java™ Application Request”
→
“Latest
Information”
To Turn Off Automatically
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“Bluetooth Timeout”
1. Select the desired time.
Your phone turns the function off automatically after the
specified time.
To See Your Phone Details
“Connectivity”
→
“Bluetooth”
→
“Bluetooth Settings”
→
“My Phone Details”
Infrared
In order to use the Infrared function, you need to search for
other infrared enabled devices to establish contact with your
phone. Keep your phone within a distance of 20 centimetres
before searching. The infrared setting will return to off when no
data is transmitted/received via infrared communication.
Turning On or Off
“Connectivity”
→
“Infrared”
→
“Switch On/Off”
1. Select “On” or “Off”.
The infrared setting is activated, and “ ” is displayed.
Sending All Data
“Connectivity”
→
“Infrared”
→
“Send All”
1. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “Change Handset Code”
on page 126.
2. Select the desired data to send.
3. Enter the authorisation code.
(M 12-2)
Connectivity 145
Mass Storage
You can set the phone to connect to a PC via Mass Storage
mode.
“Connectivity”
→
“Mass Storage”
1. Press [Yes].
Note
•Activating Mass Storage mode also activates offline mode.
•Mass Storage is not available when the battery is low, a
Java™ application is paused, music player is active, or a
memory card is not inserted in your phone.
USB Charge
You can set the phone to charge via USB, connected to a PC.
“Connectivity”
→
“USB Charge”
1. Select “Enable” or “Disable”.
Card Settings
Formatting Memory Card
“Connectivity”
→
“Card Settings”
→
“Format Card”
1. Enter your handset code.
For details on the handset code, see “Change Handset
Code” on page 126.
2. Press [Yes] to start formatting.
Making a Backup File
With a memory card inserted in your phone, you can make
backup files of Bookmarks, Text, Phonebook entries, Calendar
and Tasks in the handset memory to the memory card. You can
also restore the backup data from the memory card.
“Connectivity”
→
“Card Settings”
→
“Backup/
Restore”
→
“Backup”
1. Enter your handset code.
For details on the handset code, see “Change Handset
Code” on page 126.
2. Select the desired item to back up or “Select All” to back
up all files.
(M 12-3)
(M 12-4)
(M 12-5)
(M 12-5-1)
146 Connectivity
Restoring a Backup File
“Connectivity”
→
“Card Settings”
→
“Backup/
Restore”
→
“Restore”
1. Enter your handset code.
For details on the handset code, see “Change Handset
Code” on page 126.
2. Select the desired item to restore or “Select All” to
restore all files.
3. Select the desired file to restore.
A confirmation message indicating deletion from the
handset memory is displayed.
4. Press [Yes] to start restoring.
Note
•To delete a backup file, highlight the desired item, press
[Options] and select “Delete” after performing steps 1 to 3.
Connecting SX862 to Your PC 147
Connecting SX862 to Your PC
(SX862 CD-ROM may be purchased separately.)
You can use the following functions by connecting the SX862
to your PC using a USB data cable or via
Bluetooth
wireless
technology:
• 3G/GSM modem
• Handset Manager for SX862
• Music Manager for SX862
• Sync Manager for SX862
System Requirements
Operating System:
Windows 2000*, Windows XP**, Windows Vista
*Service Pack 4 or later
** Service Pack 2 or later
Supported Software:
Microsoft Outlook/Outlook Express
Interface:
USB port or
Bluetooth
wireless port
CD-ROM drive
To use Music Manager, DirectX9 and Windows Media Player 9
or later are required.
3G/GSM Modem
You can use SX862 as a 3G/GSM modem to access the
Internet from your PC. Connect your phone to your PC via
Bluetooth
wireless technology or USB interface. Software
installation on your PC is required.
Modem via the USB Data Cable
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The SX862 CD-ROM screen is displayed.
If the SX862 CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Select the USB driver from the on-screen instructions of
your CD-ROM, and start installation of USB driver
software following the on-screen instructions of your
CD-ROM.
•
During installation, the on-screen instructions ask you to
connect your phone to your PC. Power on your phone
and atta
ch the phone to the USB port of your PC using
the USB data cable (optional accessory).
3. Follow the on-screen instructions to complete
installation.
148 Connecting SX862 to Your PC
4. Select the modem driver from the on-screen
instructions of your CD-ROM, and install modem driver
software following the on-screen instructions of your
CD-ROM.
5. Follow the on-screen instructions to use your phone as
a modem driver.
• When the on-screen instructions ask modem driver
type, select the cable as a modem driver.
Modem via Bluetooth Connection
1. Turn on the
Bluetooth
wireless function of your phone.
For details, see “To Turn On or Off the Bluetooth Wireless
Function” on page 141.
2. Pair your PC with your phone.
For details on pairing your PC with your phone, see “To
Search for Devices to be Paired” on page 141.
3. Insert the CD-ROM into your PC’s CD-ROM drive.
The SX862 CD-ROM screen is displayed.
If the SX862 CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
4. Select the modem driver from the on-screen
instructions of your CD-ROM, and install modem driver
software following the on-screen instructions of your
CD-ROM.
5. Follow the on-screen instructions to use your phone as
a modem driver.
• When the on-screen instructions ask modem driver
type, select
Bluetooth
as a modem driver.
Note
•Modem communication is not possible while communicating
with the Handset Manager via Bluetooth wireless technology
or USB interface.
•It is not recommended that you make or answer calls when
you are using SX862 as a GSM/GPRS modem. The operation
may be interrupted.
•Your phone exhausts the battery when connected to a PC,
even when not communicating.
•For a detailed explanation on how to use the Modem driver,
please click and refer to the help on the Modem Driver.
Connecting SX862 to Your PC 149
Handset Manager
You can transmit the following items between your phone and
your PC, and can use Phonebook entries on your PC:
• Gallery files (pictures/sounds/video clips/Other Documents
data)
• Phonebook entries
• Short messages
• Schedule entries
Via USB Data Cable
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The SX862 CD-ROM screen is displayed.
If the SX862 CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Select Handset Manager from the on-screen
instructions of your CD-ROM, and start installation of
Handset Manager software following the
on-screen instructions of your CD-ROM.
• If you have not installed the USB driver, follow steps 2
and 3 on page 147.
3. Follow the on-screen instructions to complete
installation.
• During installation, the on-screen instructions ask you to
select an interface. Select the USB data cable as an
interface.
4. Connect your phone to your PC. Power on your phone
and attach the phone to the USB port of your PC using
the USB data cable (optional accessory).
5. Select [Yes] for Mass Storage mode.
For details on activating this mode, see “Mass Storage” on
page 145.
6. Launch Handset Manager from the relevant folder.
7. Follow the on-screen instructions of Handset Manager.
150 Connecting SX862 to Your PC
Via Bluetooth
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The SX862 CD-ROM screen is displayed.
If the SX862 CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Select Handset Manager from the on-screen
instructions of your CD-ROM, and start installation of
Handset Manager software following the
on-screen instructions of your CD-ROM.
3. Follow the on-screen instructions to complete
installation.
• During installation, the on-screen instructions ask you to
select an interface. Select
Bluetooth
as an interface.
4. Select [Yes] for Mass Storage mode.
For details on activating this mode, see “Mass Storage” on
page 145.
5. Launch Handset Manager from the relevant folder.
6. Follow the on-screen instructions of Handset Manager.
Note
•Some large files may not be able to be transmitted from the
PC to the phone.
•Applications (Camera, Gallery, etc.) do not run when the
phone is connected to the PC via Bluetooth wireless
technology interface or USB data cable.
•If you have already installed Sharp Handset Manager, you
need to uninstall the previous one.
•If you have trouble with installation, uninstall Handset
Manager, restart your PC, reinstall Handset Manager and
restart.
Music Manager
You can manage the playlist and exchange sound files on your
PC. Available files are the sound files in the following formats:
MP3, AAC, 3GPP.
Connecting SX862 to Your PC 151
Main Control Panel
Control all the main actions from here.
Play: Plays back a file.
Previous: Returns to the top portion of the
current file.
Next: Jumps to the next file.
Search Media File: Searches a media file.
Browse: Browses all the media files sorted in
Genre/Artist/Album.
Input Window: Quickly finds the media files in Library
or the playlist with keyword entry.
Media Management in PC
Media files in PC can be easily explored in 2 main columns.
Add Playlist: Creates a new playlist.
Add Smart Playlist: Creates a smart playlist.
Remove Playlist: Removes a playlist.
Media Management in Handset
Media files in Handset can be easily explored in 2 main
columns.
Previous Browse
Search Media File
Input Window
Media Management
in PC
Media Management
in Handset
Play
Next
Add Playlist
Add Smart Playlist
Remove Playlist
Main Control Panel
152 Connecting SX862 to Your PC
• With the drag and drop operation, you can upload the sound
files and the playlists from your PC, and also download them
to your PC.
• With the drag and drop operation, you can change the order
of tracks in the playlist of your PC.
• You can create a new playlist and delete an existing playlist.
• With the drag and drop operation, you can add a sound file
to a playlist, and delete them from the playlist.
• You can edit the name of a playlist of your PC.
• You can edit the title, artist name, and album name of sound
files of your PC (only available in MP3 format).
Tip
•To add tracks from your PC into the Music Manager library,
go to “Advanced” then search music tracks.
•Once you have created your list, drag the list to the SX862
area on Music Manager, and the files will be uploaded to the
SX862. If one or more of the files is already stored on the
handset, Music Manager will not upload them again; the
playlist will play the track already uploaded.
•Music Manager also allows you to import existing playlists
(M3U file type) that you may have created using other media
programs.
•Use Smart Playlist to automatically add tracks to a playlist
based on criteria you can select.
Sync Manager
You can synchronise the following data with the data of
Microsoft Outlook or Outlook Express on your PC.
• Phonebook entries.
• Schedule entries.
Tip
•You can set up Sync Manager to start up and synchronise
automatically after you connect your phone to your PC via the
USB data cable.
Troubleshooting 153
Troubleshooting
Problem Solution
The phone does not turn
on.
•Make sure the battery is properly
inserted and charged.
PIN code or PIN2 code is
rejected.
•Make sure you have entered the
correct code (4 to 8 digits).
•Your SIM/USIM card/protected
functions will become locked after
three unsuccessful attempts.
•Contact your SIM/USIM provider if
you do not have the correct PIN
code.
The SIM/USIM card
becomes locked.
•Enter the PUK code (8 digits)
provided by your service provider (if
supported).
•If the attempt is successful, enter
the new PIN code and confirm your
phone is operational again.
Otherwise contact your dealer.
The display is difficult to
read.
•Adjust the backlight brightness for
the display.
Phone functions do not
work after the phone is
turned on.
•Check the radio signal strength
indicator as you may be outside the
service area.
•Check to see if any error message
is displayed when you turn your
phone on. If so, contact your dealer.
•Make sure the SIM/USIM card is
correctly inserted.
Call quality is poor.
•Your current location may not
provide good call quality (i.e., in a
car or train). Move to a location
where radio signal strength is
greater.
Cannot send or receive
text message.
•Make sure you are correctly
subscribed for the Short Message
Service, that the network supports
this service, and that the centre
number is set up correctly. If not,
contact your network service
provider.
Problem Solution
154 Troubleshooting
Calls cannot be made or
received.
•If the message “Insert SIM Card” is
displayed when the phone is
switched on, you cannot use your
SIM/USIM card or the SIM/USIM
card is damaged. Contact your
dealer or network service provider.
•Check your call barring, fixed
dialling setting, remaining battery
and call forwarding settings.
•Check if your phone is currently
performing data communication
using Infrared (IrDA),
Bluetooth
wireless technology interface or a
USB data cable.
•Check the remaining balance if you
are using a pre-paid SIM/USIM
card.
Cannot access network
service.
•Check where your account has
been registered and where the
service is available.
Limited memory
available.
•Delete any unnecessary data.
Problem Solution
Cannot connect to
Multimedia Messaging
Service provider.
•MMS settings and configuration
may be missing or incorrect or the
network does not support it. Check
your service provider’s access point
number.
Contact your service provider to
confirm the correct settings.
Call is terminated
unexpectedly.
•Magnetised objects such as health
necklaces placed near the phone
may terminate the call. Keep your
phone away from such objects.
No entries are displayed
in the Phonebook.
•Confirm that the Source setting
(Handset or SIM/USIM) is correct.
Cannot receive OBEX
data.
•The OBEX data can only be received
in standby.
Problem Solution
Safety Precautions and Conditions of Use 155
Safety Precautions and Conditions of
Use
Your phone conforms to international regulations insofar as it is
used under normal conditions and in accordance with the
following instructions.
Conditions of Use
Electromagnetic waves
• Do not switch on your phone aboard an aircraft (as your
phone may interfere with the aircraft’s electronic systems).
Current legislation forbids this use and legal action can be
taken against the user.
• Do not switch on your phone in a hospital, except in
designated areas.
• Use of your phone’s function may affect the performance of
medical electronic units (pacemakers, hearing aids, insulin
pumps, etc.). When the phone function is on, do not bring it
near medical equipment or into areas in which medical
equipment is being used. If you have a hearing aid or a
pacemaker, only use the phone on the opposite side of your
body from where it is located. The phone should be kept at
least 6 inches (15.24 cm) from a pacemaker ANYTIME the
phone is switched on.
• Do not switch on your phone near gas or flammable
substances.
• Observe the rules concerning the use of mobile phones at
gasoline stations, chemical plants and at all sites where a
risk of explosion exists.
Caring for your phone
• Do not allow children to use your phone without supervision.
• Do not open or attempt to repair your phone yourself. The
product can only be repaired by authorised service
personnel.
• Do not drop your phone or subject it to severe impacts.
Bending the body and pushing the display or keys with
extreme force could damage the phone.
• Do not use solvents to clean your phone. Use only a soft, dry
cloth.
• Do not carry your phone in your back pocket as it could break
when you sit down. The display is made of glass and is
particularly fragile.
• Avoid touching the external connector on the underside of
the phone, since the delicate components within can be
damaged by static electricity.
156 Safety Precautions and Conditions of Use
Mobile Light
Do not use Mobile Light near people’s faces.
Eyesight may be temporarily affected leading to accidents.
CAUTION
Use of controls, adjustments or
performance of procedure other than
those specified herein may result in
hazardous radiation exposure. As the
emission level from Mobile Light LED
used in this product is harmful to the eyes, do not attempt to
disassemble the cabinet. Servicing is limited to qualified
servicing station only.
Mobile Light LED Properties
a) Emission Duration: Continuous
b) Wavelength
White: 400-700 nm
c) Maximum Emission Output
White: 240 µW (1.2 mW inside handset)
Battery
• Use your phone only with batteries, chargers and
accessories recommended by the manufacturer. The
manufacturer disclaims any liability for damage caused by
the use of other chargers, batteries or accessories.
•Network configuration and phone usage will affect
talk-time and standby time.
Using the games or camera will hasten battery consumption.
•When the battery charging alert is displayed on the
screen, charge the battery as soon as possible. If you
continue using your phone ignoring the alert, the phone may
cease to function, and all data and settings you have stored
may be lost at any moment.
• Before removing the battery from the phone, make sure the
phone is switched off.
• Replace and charge the new battery as soon as possible
after removing the old one.
CLASS 1
LED Product
EN60825-1:1994 A1:2002 & A2:2001
CAUTION-CLASS 1M
LED RADIATION WHEN OPEN
DO NOT VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
Mobile Light
Safety Precautions and Conditions of Use 157
• Do not touch the battery terminals. Batteries can cause
damage, injury or burns if a conductive material touches
exposed terminals. When the battery is detached from the
phone, use a cover made of non-conductive material for
keeping and carrying the battery safely.
• Recommended temperature for using and storing batteries is
approximately 20°C.
• The batteries’ performance is limited in low temperatures,
particularly below 0°C and the phone may not work
temporarily regardless of the amount of remaining battery
power.
• Exposing the phone to extreme temperatures will shorten
battery life.
• The battery can be charged and discharged hundreds of
times but it will eventually wear out. When the operating time
(talk-time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE,
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
See “Battery Disposal” on page 13.
Aerial Care
• Do not cover the top of the phone (p. 11, No. 23) with your
hand when in use as this may interfere with the performance
of the built-in aerial. Call quality may deteriorate leading to
shortened talk-time and standby time because the mobile
phone has to operate on a higher power level than is
necessary.
• Use only the aerial supplied or one approved by Sharp for
your mobile phone. Using unauthorised or modified aerials
may damage the mobile phone. Moreover, since the mobile
phone may violate the appropriate regulations, it may lose
performance or exceed the limitation of SAR levels.
• To avoid impaired performance, do not damage the aerial of
the mobile phone.
• To avoid interfering with blasting operations, please turn off
the mobile phone in a blasting area or in a place where a
“turn off two-way radio” sign is posted.
158 Safety Precautions and Conditions of Use
Camera Operation
• Learn picture quality, file formats, etc. beforehand.
The taken pictures can be saved in JPEG format.
• Be careful not to move your hand while taking pictures.
If the phone moves while taking a picture, the picture can
become blurred. When taking a picture, hold the phone
firmly to prevent it from moving, or use the delay timer.
• Clean the lens cover before taking a picture.
Fingerprints, oils, etc. on the lens cover hinder clear
focusing. Wipe them off with a soft cloth before taking a
picture.
Others
• As with any electronic storage unit, data may be lost or
corrupted under various circumstances.
• Before connecting the phone with a PC or a peripheral unit,
read the operation manual for the other unit carefully.
• If the phone’s battery has been removed for some time, or
the phone has been reset, the unit’s clock and calendar may
be reinitialised. The date and time should be updated in this
case.
Environment
• Keep your phone away from extreme heat. Do not leave it on
the dashboard of a car or near a heater. Do not leave it in any
place that is extremely damp or dusty.
• Since this product is not waterproof, do not use it or store it
where fluids such as water can splash onto it. Raindrops,
water spray, juice, coffee, steam, perspiration, etc. will also
cause malfunctions.
Precautions Concerning Vehicle Use
• It is the user’s responsibility to check the local laws
governing the use of a mobile phone in vehicles. Pay full
attention to driving. Pull off to the side of the road, park the
car, and switch off the engine before making or answering a
call.
• Use of your phone’s function may interfere with the vehicle’s
electronic systems, such as the ABS anti-lock brakes or the
air-bag. To ensure no such problem occurs, please check
with your dealer or car manufacturer before connecting your
phone.
• Only allow qualified service maintenance personnel to install
the vehicle accessories.
Safety Precautions and Conditions of Use 159
The manufacturer disclaims any liability for damage which may
result as a consequence of improper use or use contrary to the
instructions contained herein.
SAR
Your Sharp mobile phone has been designed, manufactured
and tested so as not to exceed the limits for exposure to
electromagnetic fields recommended by the Council of the
European Union. These limits are part of comprehensive
guidelines developed by independent scientific organisations.
The guidelines include a substantial safety margin designed to
assure the safety of the phone user and others and to take into
account variations in age and health, individual sensitivities and
environmental conditions. European standards provide for the
amount of radio frequency electromagnetic energy absorbed by
the body when using a mobile phone to be measured by
reference to the Specific Absorption Rate (SAR). The SAR limit
for the general public is currently 2 watts per kilogram
averaged over 10 grams of body tissue. Your Sharp mobile
phone SAR value is 0.738 watts per kilogram. This has been
tested to ensure that this limit is not exceeded even when the
phone is operating at its highest certified power. In use
however your Sharp mobile phone may operate at less than full
power because it is designed to use only sufficient power to
communicate with the network.
FCC NOTICE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
Exposure to Radio Waves
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These
limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate, or
160 Safety Precautions and Conditions of Use
SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR
are conducted using standard operating positions specified by
the FCC with the phone transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR
level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to
a wireless base station aerial, the lower the power output.
Before a phone model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
limit established by the government-adopted requirement for
safe exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as required by
the FCC for each model. The highest SAR value for this model
phone when tested for use at the ear is 0.319 W/kg and when
worn on the body, as described in this user guide, is 0.362
W/kg. Body-worn Operation; This device was tested for typical
body-worn operations with the back of the phone kept 1.5 cm
from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a 1.5 cm
separation distance between the user’s body and the back of
the phone. The use of belt-clips, holsters and similar
accessories should not contain metallic components in its
assembly.
The use of accessories that do not satisfy these requirements
may not comply with FCC RF exposure requirements, and
should be avoided. While there may be differences between the
SAR levels of various phones and at various positions, they all
meet the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID APYHRO00065.
Additional information on Specific Absorption Rates (SAR) can
be found on the Cellular Telecommunications & Internet
Association (CTIA) web-site at http://www.phonefacts.net.
*In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard incorporates a
substantial margin of safety to give additional protection for
the public and to account for any variations in
measurements.
Out of Warranty List 161
Out of Warranty List
This limited warranty shall not apply in respect of the following:
(i) Any deterioration due to normal wear and tear including all
plastic surfaces and all other externally exposed parts that
are scratched or damaged due to normal customer use.
(ii) Defects caused by the Product being subjected to any of
the following: use in contradiction with the user guide,
rough handling, exposure to moisture, dampness or
extreme thermal or environmental conditions or rapid
changes in such conditions, corrosion, oxidation,
unauthorised modifications or connections, unauthorised
opening or repair, repair by use of unauthorised spare
parts, misuse, improper installation, accident, forces of
nature, spillage of food or liquid, influence from chemical
products or other acts beyond Sharp’s reasonable control
(including but not limited to lifetime, and breakage of or
damage to aerials) unless the defect was caused directly
by defects in materials or workmanship.
(iii) Products in respect of which the product serial number or
the IMEI number has been removed, erased, defaced,
altered or made illegible.
(iv) Defects caused by the fact that the Product was used with
or connected to a product or an accessory not
manufactured or supplied by Sharp or was used other
than for its intended use.
(v) Defects caused by a defective function of the cellular
network.
(vi) Defects caused by the fact that the battery was short-
circuited or seals of the battery enclosure or cells were
broken or show evidence of tampering or the battery was
used in equipment other than for which it has been
specified.
(vii) Defects caused by the need to upgrade Products software
due to changes in cellular network parameters.
(viii) Products operated outside published maximum ratings.
(ix) Products rented on a monthly basis.
Charger Plug:
Do not use the AC Charger if the plug does not fit the socket.
162 Index
Index
A
Alarms 101
Area Info 75
B
Battery 13, 156
Bluetooth 141
Browser 80
Browser Settings 82
Navigating a WAP or Web
Page 81
C
Calculator 106
Calendar 97
Call Functions 24, 139
Auto Redial 135
Call Costs 140
Call Restrictions 131
Call Timers 134, 139
Call Waiting 27, 134
Conference Call 27
Data Counter 140
Earpiece Volume 26
Emergency Calls 24
International Calls 24
Make Another Call 26
Minute Minder 134
Muting the
Microphone 28,
30, 130
My Phone Number 131
Redialling 25
Rejecting a Call 26, 29,
133
Sending a Busy Tone 26,
29
Speaker 26, 30, 130
Speed Dialling 25, 51
Video Calling 30, 129
Voice Call 24, 26
Voicemail & Diverts 127
Call Log 139
Camera 58
Continuous Shoot 63
Digital Zoom 59
Exposure 59
Focus Mode 60
Mobile Light 11, 61
Panorama 63
Picture Quality 60
Picture Size 62, 66
Recording Time 66
Recording Video Clips 59,
66
Scanner 64
Scene 65
Settings 59
Shortcut Keys 62
Switching Modes 61
Taking Pictures 58
Video Encoding 66
Video Quality 60
White Balance 64
Cell Broadcasts 74
Characters
Changing the Input
Method 33
Chinese User
Dictionary 38
Cutting, Copying, Pasting
Text 41
Entering Characters 32
Input Language 33
Text Templates 41, 111
Chinese User Dictionary 38
Creating 38
Deleting 38
Editing 38
Using 39
Conditions of Use 155
Connectivity 141
Countdown Timer 109
Cycloid Position 18
D
Display Indicators 20
Document Viewer 110
E
Expenses Memo 107
F
Flash®87
FoneTV 52
G
Gallery 84
Other Documents 88
Games & Applications 92
Java™ Settings 94
Index 163
H
Handset Code 126
Help 112
Hour Minder 110
I
Infrared 144
M
Main Menu 42
Mass Storage 145
Master Reset 127
Memory Card 15
Memory Status 51, 91, 101,
106
Messaging 67
Attaching/Removing
Data 69
Creating a Message 67
Drafts Box 71
Email 67, 79
Forwarding a Message 73
Mailing List 47
MMS 67, 72, 77
Reading a Message 71
Replying to a Message 73
Sending Options 70
Settings 75
SMS 67, 76
Multimedia 52
Music 55
Adding a File 57
Adding a New Playlist 55
Downloading Music 57
Playing Back Music 55
Sorting 57
Music and Sounds 86
N
Navigating Functions 23
O
Off Line Mode 136
Organiser 97
P
PC Connection 147
Phonebook
Adding New Entry 44
Category 50
Dialling from an Entry 46
Editing Entries 48
Group 47
Saving a Number 44
Saving an Address 72
Saving an Image 85
Searching the List 45
Sending a Message 47
Storage Memory 44
Thumbnail 48
Phonebook Lock 126
Pictures 84
PIN/PIN2 Code 125
Power On and Off 17
S
Safety Precautions 155
Set Java™ Wallpaper 96
Settings 114
Date & Time 123
Display 115
Font 116
Internet 136
Language 124
Network 135
Profiles 114
Security 125
Sound 119
Standby Display 116
Shortcuts 42
SIM Application 113
SIM/USIM Card 13
Stopwatch 108
T
T9 Text Input
Using PinYin mode 36
Using Stroke mode 36
Using T9 English Mode 34
Tasks 103
Themes 86
Troubleshooting 153
U
USB Charge 145
V
Videos 52, 85
Adding a File 53
Adding a New Playlist 53
Downloading Video 54
Playing Back Video 52
Searching a File 53
Settings 53
Voice Recorder 112
W
World Clock 109
www 52