Sharp HRO00095 Cellular Phone User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	1098429
Application ID	0aIjPwwHulAKnoQ/bTyiUQ==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	356.54kB (4456765 bits)
Date Submitted	2009-04-17 00:00:00
Date Available	2009-06-01 00:00:00
Creation Date	2009-03-23 09:49:52
Document Lastmod	2009-04-10 15:23:28
Document Title	Users Manual 2

e02_dv65_7e.fm
33 ページ
２００９年３月２０日
Icon
Message
xx New Message R
午後５時２８分
Page
P. 157
xx New Message F
P. 157
xx new ToruCa
P. 292
New auto send result
P. 137
Update complete
P. 496
Check update
P. 496
Update required
P. 494
Check for update
P. 494
USB mode setting
P. 346
Download successful (Music&Video
Channel)
P. 247
Download failed (Music&Video Channel)
P. 247
Charge limit exceeded
P. 383
Send loc - No resp
P. 306
Send loc - Resp
P. 306
Send loc - Failed
P. 306
New i-appli call
P. 280
Custom menu/Basic menu/Menu*2
P. 37
Select the stock icon/t.
: After the details are checked, the stock icon and message disappear.
Stock icons do not appear while the i-motion set as stand-by is played
or the i-appli stand-by is being activated.
Displaying and operating i-Widget
In the i-Widget screen, multiple i-Widget can be activated simultaneously
and viewed as a list.
For details on operation of i-Widget nP. 285
1 Area where Widget appli is pasted
2 Setting status icons for Widget appli
For details on the setting status icons
nP. 263
3 Operation guidance
Available menus appear.
Before Using the Handset
金曜日
i-Widget screen
*1 When the 2in1 mode is set to [Dual mode], the number of [A mode] and
[B mode] appears each.
*2 The message that appears differs depending on the menu screen or
position.
In stand-by, a stock icon appears/t.
: When both the stock icon and the popup message appear, switch the
selection between the stock icon and the popup message with u.
: Place the pointer over the stock icon in the stand-by display with
Optical TOUCH CRUISER to display the message. Press t to
check details.
: Touch stock icons in the viewer position to display the message.
Touch again to check details.
33
e02_dv65_7e.fm
[33/56]
e02_dv65_7e.fm
34 ページ
２００９年３月２０日
金曜日
午後５時２８分
Activating i-concier with popup message
Before Using the Handset
Display popup messages in the stand-by display
when information is received. Activate i-concier with
the popup messages to check information details.
Optical TOUCH CRUISER
Use the Optical TOUCH CRUISER to perform the same operations
as those for w of Multi-guide key (e.g. moving the cursor or
scrolling the screen) (Some operations may differ).
Move the pointer or cursor just as covering the whole operating range of
the Optical TOUCH CRUISER with finger while pressing a ball of the
finger.
The pointer or cursor moves in conjunction with sliding of the finger.
“ひつじのしつじくん®”
ŠNTT DOCOMO
In stand-by, a popup message appears/t.
: Alternatively, select the popup messages in the stand-by display with
Optical TOUCH CRUISER and press t to activate i-concier.
: In the viewer position, touch the popup message and point the
cursor. Then touch again to activate i-concier.
Select the popup message/t.
Operating range of
Optical TOUCH
CRUISER
: The popup message disappears after activating i-concier.
Calendar or Stand-by memo does not appear while a popup message
appears.
Depending on the screen, the Optical TOUCH CRUISER may not be
available.
34
e02_dv65_7e.fm
[34/56]
e02_dv65_7e.fm
35 ページ
２００９年３月２０日
金曜日
午後５時２８分
■ Moving pointer
Cautions when using the Optical TOUCH CRUISER
Do not operate the Optical TOUCH CRUISER using a pointed metallic
object such as a pen tip. May cause scratches or a failure of the
sensor.
Note that putting a sticker, etc. to the operating range may cause a
malfunction.
Setting whether to use Optical TOUCH CRUISER

In the Custom menu, select [Settings]/[General
settings]/[TOUCH CRUISER set]/[Usage settings].
Select the setting/t.
Setting pointer speed/scroll speed

In the Custom menu, select [Settings]/[General
settings]/[TOUCH CRUISER set]/[Pointer speed]/
[Scroll speed].
Select the speed/t.
■ Moving cursor
In the Basic menu or Submenu, move the cursor up/
down and left/right in the same way as w of
Multi-guide key.
When there are multiple pages, move the cursor to
switch the pages.
Before Using the Handset
In the stand-by display, in the Custom menu screen
or during i-mode or Full Browser, etc., move the
pointer ([L], [K], etc.) up/down, left/right or diagonally
to select an item.
In some Custom menus, the pointer shape varies
or the pointer is not supported.
Select icons displayed in the stand-by display and
press t to perform the following action.
 Stock icon: To check information details
 i-Channel ticker: To display the channel list
 Stand-by memo: To display the Stand-by memo
e.g.) Custom menu
input screen
screen
 Popup message: To activate i-concier
 Stand-by clock (when Clock display is set to [ON(Large)]): To activate
Schedule
Move the pointer to the edge of the screen during i-mode or Full Browser
to show [G], [R]/[\], [Z] and scroll the screen to the direction of the
arrow. If link is set, [M] appears, and press t to move to the linked page.
The pointer moving speed varies depending on the finger sliding speed.
e.g.) Basic menu
screen
35
e02_dv65_7e.fm
[35/56]
e02_dv65_7e.fm
36 ページ
２００９年３月２０日
金曜日
午後５時２８分
Setting and selecting menu
Set, change or save functions from the menu screens.
Switching set start menu temporarily
Switch the start menu temporarily. When the stand-by display reappears,
the start menu returns to the one set in Menu priority.
Before Using the Handset
Menus are classified by function (nP. 442).
For details on operations in the viewer position nP. 41
The explanations in this manual are based on how to retrieve a function
from the Custom menu.
Setting start menu 
Set the start menu that displayed when t is pressed in stand-by.
Start menu
Characteristics
Custom menu The preset Kisekae Tool (nP. 103) can be selected and
set. Each Kisekae Tool consists of different functions and
designs. Kisekae Tools can be downloaded from sites and
used.
Preset Kisekae Tools
※
Basic menu
White
 Black
 Red
拡大メニュー (Large)
 シンプル (Simple)
ダイレクトメニュー
Preset Kisekae Tools differ depending on the FOMA
terminal handset color.
Select the icon displayed on the menu to retrieve the
function. Also, input the function number, which is
assigned to each function, to quickly retrieve the function
to be used.
In stand-by, press t/[Settings]/[Disp/LED/Power
saver]/[Menu priority].
Select the start menu/t/[Yes].
36
e02_dv65_7e.fm
[36/56]
Stand-by display
Custom menu
Basic menu
■ Submenu operations for the Custom menu screen
[Assign function]
nP. 104
[Rst func asgnment]
nP. 104
[Reset menu screen]
nP. 105
[Reset menu history]
nP. 105
[Menu priority]
nP. 36
[Operation guide]/select an item/t
e02_dv65_7e.fm
37 ページ
２００９年３月２０日
金曜日
午後５時２８分
■ Submenu operations for the Basic menu screen
■ Retrieving from the Custom menu
[Icon settings]
/[Icon image]
nP. 106
[Set background]
nP. 106
[Reset menu screen]
nP. 107
[Menu priority]
nP. 36
[Operation guide]/select an item/t
Retrieving a function from each menu
For details on operating shortcut menu nP. 379
For details on the available functions nP. 442
Use w and the Optical TOUCH CRUISER in either menu.
Press the dial key corresponding to the menu item number (U, V, W,
etc.) to select a function. However, in the Custom menu, a function may
not be selected by using the menu item numbers.
The method for selecting functions may differ depending on the Kisekae
Tool set for the Custom menu.
Press c to re-select a function, and the previous screen reappears.
Press H to return to stand-by.
(;)
or
or
wt
ut
Custom menu
When [Camera]
appears
When the camera
(shooting still
pictures) is activated
■ Retrieving from the Basic menu
When a stock icon (nP. 32) appears in stand-by, select [G] to show
the each menu.
The way of activating camera (shooting still pictures) with Multi guide key
or Optical TOUCH CRUISER is explained as an example below.
For , (;), use the Optical TOUCH CRUISER to select an item.
The following shows the screen operated with the Optical TOUCH
CRUISER.
(;)
Before Using the Handset
/[Dsp icon name]
nP. 106
Basic menu
(; )
(; )
or
or
wt
ut
When [Camera func]
appears
When the camera
(shooting still
pictures) is activated
In the Basic menu, input the function number, which is assigned to
setting menu, to quickly retrieve the function to be used (nP. 442).
When the Custom menu screen is changed by Kisekae Tool, the
operation may differ from the description in this manual. In this case,
switch the menu screen to the Basic menu (nP. 36) or perform the
Reset menu screen (nP. 105).
37
e02_dv65_7e.fm
[37/56]
e02_dv65_7e.fm
38 ページ
２００９年３月２０日
金曜日
午後５時２８分
Retrieving a function from the Simple menu
Refer to the menu list for details on [シンプル(Simple)] (nP. 463).
Before Using the Handset
(;)
(; )
or
or
wt
wt
Selecting a function from Submenu
When [Submenu] appears in the operation guidance,
press C to display functions (Submenu) that can be
used in the screen. Select the displayed Submenu
with w or the Optical TOUCH CRUISER.
If there are multiple pages in the Submenu, change
pages with w or the Optical TOUCH CRUISER.
Alternatively, press the dial key corresponding to the
menu item number (U, V, W, etc.) to select a
function. However, some Submenus do not have item
numbers.
Submenu screen
Simple menu
When [Camera
func] appears
When the camera
(shooting still
pictures) is activated
Retrieving a function from Quick Settings
Select the Pict area in the stand-by display with Optical TOUCH CRUISER
and press t to display the Quick Settings. Select each key to activate the
corresponding function.
Press c to return to the stand-by display.
In the viewer position, touch the Pict area and touch each key. Touch
other than Quick Settings to return to the stand-by display.
For details on the available functions nP. 462
, (; )
Pict
area
Stand-by display
38
e02_dv65_7e.fm
[38/56]
Quick Settings
■ Target data when operating functions from Submenu
When operating functions from Submenu of data list screen, some
functions target at selected data only while other functions target at all
data in the list screen. When attempting to operate selected data only,
select the data to operate in advance.
 Function targeting at selected data only
Example: Edit title, Edit file name, Delete one, etc.
 Function targeting at all data in the list screen
Example: Delete all, Copy all in folder, Move all in folder, etc.
e02_dv65_7e.fm
39 ページ
２００９年３月２０日
金曜日
午後５時２８分
Touch panel
Operations in viewer position
This manual describes the key operation instead of touch panel
operation when both operations are available. The following explains
basic operations for touch panel.
The following range is available to operate with touch panel (Operating
range differs depending on the function).
Operation
Move the cursor and
select
For a list screen, touch
the object to point the
cursor and touch again.
w/t
Touch for a while
Keep the finger on the
touch panel.
Continuous operation
For adjustment volume,
fast forward/fast rewind,
etc., touch a key
displayed in the screen
for a while to operate
continuously.
o (for 1+
seconds)/p
(for 1+
seconds) or q
(for 1+
seconds)/r
(for 1+
seconds), etc.
Slide
Scroll the screen
While viewing sites, etc.,
slide up/down/left/right.
Put the finger on the
touch panel and put it
off.
When using the touch panel
The touch panel is designed to lightly touch with the finger. Do not
forcefully press with the finger, or press with a pointed object
(fingernail, ballpoint pen, pin, etc.).
In the following cases, the touch panel may not work even if it is
touched. May cause a malfunction.
 Operation with a gloved finger
 Operation with a fingernail
 Operation with foreign objects placed on the operation pad
 Operation on the touch panel on which a protective sheet or a
sticker is put
Example in the
normal
position
Select/OK
Touch the key displayed
in the screen.
Touch
Operating range of the touch panel
When the screen is off, press & to display the screen and perform the
touch operation.
The message stating that the operation is not available appears when
the touch panel cannot be used.
In other than the viewer position, the touch panel is available when using
Writing authentication (nP. 113) and AF tracking (nP. 215).
Purpose
Keep the finger on the
touch panel and slide it.
Cancel the selection
When the menu or item is
touched by mistake, slide
away from the menu or
item.
–
Continued on next page
e02_dv65_7e.fm
[39/56]
Before Using the Handset
In the viewer position, operate by putting the finger on the touch
panel (screen) instead of using the Multi-guide key and dial key in
the normal position.
Basic operation in viewer position
The following shows the operation and its main purpose in the viewer
position, and example key operation which fulfills the same function in the
normal position.
39
e02_dv65_7e.fm
40 ページ
Operation
Quick slide
Before Using the Handset
Quickly slide the finger
and put it off.
Put the distance
between two fingers
apart/closer
２００９年３月２０日
Purpose
金曜日
午後５時２８分
Example in the
normal
position
Switch pages
For a list screen, quickly
slide to the left/right.
Display previous/next data
While displaying images
or mails, etc., quickly
slide to the left/right.
Zoom in/Zoom out
While displaying an
image, put the distance
between two fingers
apart/closer.
■ Horizontal/Vertical view
The screen is displayed as follows in the viewer position.
Available screens or keys differ depending on the function.
When the FOMA terminal is switched from the normal position to the
viewer position, the screen may be displayed in full-screen depending on
the function.
Vertical view
Horizontal view
Example: Classic
schedule
Example: Classic schedule
3/1
3 2
Example: MUSIC Player
Put two fingers on the
touch panel and slide
them with putting the
distance between two
fingers apart/closer.
Touch “CLR”/Press &
Cancel/End
Touch “CLR” (when it is
displayed).
While using a function,
press &.
c/H
The operations differ depending on the function and screen in use.
When putting the finger on the touch panel, the tone sounds and the
vibrator is activated. However, the tone or vibrator may not be activated
while activating a camera, playing the music data, etc.
• The volume can be changed (nP. 94). The tone cannot be changed.
• The vibrator can be set to ON/OFF (nP. 95).
40
e02_dv65_7e.fm
[40/56]
3 2
2 1 3
1 MULTI key
Touch to use Multi Assistant.
Alternatively, touch [MULTI] of control key.
2 ++縦横切替 key
Touch to switch the screen between vertical and horizontal view. If the
key does not appear, the screen cannot be switched between vertical
and horizontal view.
Alternatively, touch [++切替] of control key.
e02_dv65_7e.fm
41 ページ
２００９年３月２０日
金曜日
午後５時２８分
■ Operation guidance
The operation guidance appears as well as in the normal position. Touch
the operation guidance key to select/execute a menu.
This manual describes operations with the operation guidance as key
operations in the normal position. For operating in the viewer position,
select same operation guidance menu as that displayed in the normal
position. Same operation as that in the normal position is available.
The operation guidance menu in the viewer position corresponds to the
operation guidance menu, operated with the following keys in the normal
position.
Vertical view
Horizontal view
Before Using the Handset
3 CLR key
Touch to return to the previous screen or delete numbers and texts.
Touch for a while to end the function being activated and return to the
stand-by display.
Alternatively, touch [CLR] of control key.
Same operation as that of c/H in the normal position is available.
4 Operation guidance (nP. 41)
5 Direction key
Touch to move the cursor.
Same operations as those of w in the normal position are available.
6 tenkeysw key
Touch to display/hide the dial/text input keys.
7 OK key
Touch to execute or set an item and menu.
Same operation as that of t in the normal position is available.
8 Dial/Text input key
Touch to enter numbers or texts.
Same operations as those of 1 to 9, 0, *, # in the normal
position are available.
The operation guidance menu, corresponding to the Multi guide keys in
the normal position may appear depending on the function.
For details on the operation guidance menu nP. 28
In the viewer position, the operation guidance menu displayed in the
normal position may appear as the control keys or Submenu.
Setting and selecting menu
In the viewer position, set, change, or register a function from the Stand-by
Display Touch Launcher/Touch menu.
Stand-by Display Touch Launcher
Quickly retrieve conveniently used functions in the viewer position.
The following functions can be retrieved from the Stand-by Display
Touch Launcher.
Mail menu
6 Phonebook
GPS compatible i-appli*2
i-mode menu
Quick search
+ Data box
i-concier
Shoot still picture
1Seg
Shoot moving picture
Card reader
0 i-mode (Google)
TOP menu*1
G-GUIDE program schedule
remote control
My picture of Data box
(picture tile display)
*1 Touch menu appears.
*2 For details on registering the GPS compatible i-appli nP. 302
Continued on next page
e02_dv65_7e.fm
[41/56]
41
e02_dv65_7e.fm
42 ページ
２００９年３月２０日
金曜日
午後５時２８分
Touch menu
Retrieve all functions available in the viewer position.
For details on functions available in the Touch menu nP. 442
Some functions are not available in the viewer position.
Before Using the Handset
The images and items in the Stand-by Display Touch Launcher or
Touch menu cannot be changed.
Operate the preset “Map Application” (nP. 303) while displaying a
map or using a navigation (including checking a route) in the viewer
position. In other cases, operate in the normal position.
Stand-by Display Touch Launcher
Touch [$] (TOP menu)
i-appli that does not support the touch panel is not available in the
viewer position. Operate in the normal position.
■ Setting whether to display Stand-by Display Touch
Launcher 
Display the Touch menu directly without displaying the Stand-by Display
Touch Launcher.
In the Custom menu, select [Settings]/[Disp/LED/
Power saver]/[Set screen]/[Stdby toch lnch disp].
Select the setting/t.
■ Displaying Stand-by Display Touch Launcher/Touch menu
Stand-by (horizontal)
Touch menu
* Touch the wall paper (excluding an area where the clock or i-Channel
ticker is displayed, and the Pict area) on the stand-by display
(horizontal).
For the Stand-by Display Touch Launcher, if no operations are
performed for approximately 5 seconds, & is pressed or the area other
than the Stand-by Display Touch Launcher is touched, the stand-by
display (horizontal) reappears.
If the FOMA terminal is set to the viewer position while displaying the
Custom menu/Basic menu in the normal position, the Touch menu
appears.
Stand-by (horizontal)
Touch*
42
e02_dv65_7e.fm
[42/56]
When the FOMA terminal is switched from the normal position to the viewer
position in the stand-by display while Screen rotation setting is set to
[Stand-by], the stand-by display (horizontal) appears.
The stand-by display (horizontal) can be changed (nP. 97).
e02_dv65_7e.fm
43 ページ
２００９年３月２０日
金曜日
午後５時２８分
Select the following items displayed in stand-by by touching.
 Stock icon
 i-Channel ticker
 Stand-by memo
 Stand-by clock
 Popup message
 Notification of 1Seg recording history, etc.
Retrieving the camera (shooting still pictures) from Touch menu
Touch a menu icon to select a menu item from the Stand-by Display
Touch Launcher or Touch menu. For menus in list format, such as 1Seg
setting, touch a menu item to point the cursor and touch again. When a
menu contains multiple pages, quickly slide to the left/right to switch
pages.
Press & to return to the previous screen.
Before Using the Handset
■ Retrieving a function from each menu
Touch menu
Touch [Camera]
Touch operation or the way of activating the camera (shooting still
pictures) with the touch panel is explained as an example below.
Retrieving the camera (shooting still pictures) from Stand-by
Display Touch Launcher
Camera menu
Touch [Shoot still pic]
Stand-by Display Touch Launcher
Touch [*]
When the camera (shooting still
pictures) is activated
When the camera (shooting still
pictures) is activated
43
e02_dv65_7e.fm
[43/56]

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2009:04:10 15:23:28+09:00
Create Date                     : 2009:03:23 09:49:52+09:00
Metadata Date                   : 2009:04:10 15:23:28+09:00
Format                          : application/pdf
Document ID                     : uuid:af727d8b-0d3d-43fa-9935-d4cd84ff2b7a
Instance ID                     : uuid:e3b78c6e-e094-4050-8c88-bcd7bea4c905
Has XFA                         : No
Page Count                      : 11

EXIF Metadata provided by EXIF.tools