Sharp HRO00095 Cellular Phone User Manual
Sharp Corporation Cellular Phone Users Manual 1
a href="https://usermanual.wiki/Sharp" itemprop="url">
Sharp >
Contents
- 1. Users Manual 1
- 2. Users Manual 2
- 3. Users Manual 3
- 4. Users Manual 4
Users Manual 4
![e02_dv65_7e.fm[55/56]55Continued on next pageBefore Using the Handset When items that have not been set remain, the setting screen appears every time the power is turned on. Alternatively, select [Settings]/[Initial setting] in the Custom menu to display the setting screen.1Set the date and time (nP. 55).2Register a terminal security code (nP. 113).3Set the Key/Touch sound (nP. 94).4Set GPS Location provision ON/OFF (nP. 304).5Set the font size collectively (nP. 109).:When the initial settings are complete, the software update function confirmation screen appears. Read the description and select [Agree] (When the initial settings are made from the menu or the software update is set to other than [auto-update], the confirmation screen does not appear).Set the date and time on the FOMA terminal.1In the Custom menu, select [Settings]/[General settings]/[Date settings].2Select the [Auto time correction] field/t/select the setting.;Select [ON]/i.;Select [OFF]/select the [Date] field/t/enter the date/t/select the [Time] field/t/enter the time (24-hour format)/t/i.• When entering month, day and time, add 0 before numbers one through nine (example: 01, 02, 03, etc.).• Set the date and time from 00:00 January 1, 2001 to 23:59 December 31, 2050.Date and time settings Change terminal security codeKey/Touch sound Location request menuSet all font size Press H to cancel the initial settings.Date settingsSetting date and time When Limit settings is set to [Enable], the terminal security code must be entered in the Date settings. The date and time that are set are saved even if the battery pack is removed, but if the battery pack remains removed for approximately 30 seconds or more, the settings are reset. Also, if the battery remains empty, the settings may be reset. When this happens, set again after charging the battery. If the date and time are not set correctly, the following functions cannot be used properly.Redial, Received calls Auto power ON/OFFAlarm ScheduleSSL/TLS (authentication) i-appli Auto startStarting i-appliDX Reception, RecordingMachi-chara Software updatePattern definitions updateRecord message (voice), Record message (Videophone calls)Camera image titles/shooting datePlayback of i-motion or music data with expiration date/period for replayView of e-books/e-dictionaries/e-comics with expiration date/period for browseWhen [Auto time correction] is set to [ON] When the power is turned on, the FOMA terminal adjusts the time by connecting to the network’s time information. If the FOMA terminal does not adjust the time even when the power is turned on, turn off the power and restart. Time may not be adjusted depending on the signal status. Time may be off by a few seconds.e02_dv65_7e.fm 55 ページ ２００９年３月２０日 金曜日 午後５時２８分](https://usermanual.wiki/Sharp/HRO00095.Users-Manual-4/User-Guide-1098431-Page-1.png)
![56e02_dv65_7e.fm[56/56]Before Using the Handset■Changing time zone manually <City>1In the Date settings screen, select the [Auto time correction] field/t/[OFF]/C.2Select a time zone/t.3Select a city/t/i.Display your number (caller ID) on the other party’s phone (display) when making a voice/Videophone call. Handset number (caller ID) is important personal information. Be very careful about your caller ID setting. The Notify caller ID function is available only on compatible phone devices.1In the Custom menu, select [Settings]/[NW Services]/[Notify caller ID].2Select [Activate/Deactivate].:To check the setting: Select [Check setting].3Select the setting.:To notify caller ID: Select [Yes].:To not notify caller ID: Select [No]. When checking your own phone number during a call nP. 601In the Custom menu, press 0.:Alternatively, select [Phone]/[Own number] (or [Settings]/[General settings]/[Check status]/[Own number]).:To switch between Number A and Number B (when 2in1 [Dual mode] is used): Press i. When time difference is adjusted overseas, the local time and date and [!] appear in Redial, Received calls, Received/Sent messages history (SMS only), received/sent mails list and location history list. The received/sent mails are not displayed in order of the displayed time and date but the mail reception/send. [!] does not appear in the Unsent messages for mail messages. If the date order display is set for the Unsent messages, unsent mails are displayed in the order of the displayed time and date. Time correction may not be performed depending on the overseas network. During overseas use, Japan time and local time (or time set in City) appear in the dual display except for the following cases.When Auto time correction is set to [ON] and time correction information is not being received from an overseas networkWhen Auto time correction is set to [OFF] and City is set to the city in the same time zone as JapanNotify caller IDNotifying the other party of your phone numberSetting Notify caller ID/No caller ID in advance Notify caller ID setting cannot be set from outside the service area.Own numberChecking your own phone number When changing the Number B of 2in1, use any of the following methods to obtain the correct Number B.Set 2in1 function OFF and then perform 2in1 setting again to set 2in1 function ONCheck the 2in1 subscription When a FOMA card exchange (2in1 subscriber b 2in1 nonsubscriber) is performed, set 2in1 function OFF. When a FOMA card exchange (2in1 subscriber b 2in1 subscriber) is performed, check the 2in1 subscription. For details on Owner information nP. 381e02_dv65_7e.fm 56 ページ ２００９年３月２０日 金曜日 午後５時２８分](https://usermanual.wiki/Sharp/HRO00095.Users-Manual-4/User-Guide-1098431-Page-2.png)