Sharp HRO00101 Cellular Phone User Manual 1
Sharp Corporation Cellular Phone Users Manual 1
UserManual.wiki
>
Sharp
>
HRO00101 User Manual
>
Users Manual 1
Contents
1.
Users Manual 1
2.
Users Manual 2
3.
Users Manual 3
4.
Part 24 Setup Photos
Users Manual 1
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![e01_dv67_7e.fm[0/22] ~~~~~ ~~~~~ ~~~~~ ~~~~DOCOMO W-CDMA and GSM/GPRS SystemThank you for purchasing the docomo PRO series SH-07A.Make sure thoroughly read this manual and the manuals included with optional accessories before and during use to ensure proper operation. If any of the contents in this manual are unclear, please contact number listed in “General Inquiries” on the back of this manual.The SH-07A is designed to make your everyday life more convenient. Careful use will ensure a long service life. Because it relies on radio signals, the FOMA terminal cannot be used in places with no signal (such as tunnels, underground, or in buildings), in places with a weak signal or outside the FOMA service area. There may be times when the terminal cannot be used in the upper floors of a building even with no obstructions in sight. There may also be times when the signal is strong and you are not moving but the call is interrupted. Make sure not to disturb others when using in public places, places with many people or quiet places. Because the FOMA terminal uses electrical signals, it is possible for a third party to listen in on a conversation. However, since the W-CDMA and GSM/GPRS system automatically applies privacy to every call, a third party that tries to listen in only hears static. The FOMA terminal converts conversations into a digital signal and sends it to the other party over the radio. If the signal cannot be reconverted properly by such as moving to an area with a weak signal, the voice may not be heard correctly. Keep a separate memo and note information (e.g. phonebook, schedule, Text memo, Record message, Voice memo) stored in the FOMA terminal. DOCOMO shall not be liable for any loss of content due to a failure, repair, upgrade or other handling of the FOMA terminal. Save the important data to the microSD Card. Or, forward and store the information such as a phonebook, mail and schedule to a PC using DOCOMO keitai datalink. The user hereby agrees that the user shall be solely responsible for the result of the use of SSL/TLS. Neither DOCOMO nor the certifier as listed herein makes any representation and warranty as for the security in the use of SSL/TLS. In the event that the user shall sustain damage or loss due to the use of SSL/TLS, neither DOCOMO nor the certifier shall be liable for any such damage or loss. Certifier: VeriSign Japan K.K., Cybertrust Japan Co.,Ltd., GlobalSign K.K., RSA Security Japan Ltd., SECOM Trust Systems Co., Ltd., Comodo CA Ltd This FOMA terminal supports the FOMA Plus-Area and the FOMA HIGH-SPEED area. This FOMA terminal can be used only via the FOMA network provided by DOCOMO and DOCOMO’s roaming area.This FOMA terminal supports Kisekae Tool (nP. 99). When the Custom menu image is changed by Kisekae Tool, some items in the Custom menu may be changed according to the menu history. In addition, some items cannot be selected even if the function numbers are entered.In this case, operations may not run as explained in this manual. Switch the menu screen to the Basic menu (nP. 36) or perform the Reset menu screen (nP. 101).Using the FOMA terminalUsing this manualDownload the latest information on this manual from the DOCOMO website. “User’s Manual (in PDF format)” Downloadhttp://www.nttdocomo.co.jp/english/support/manual/index.html※The URL and contents of this manual are subject to change without prior notice.dv67_E.book 0 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-2.png)
![10e01_dv67_7e.fm[10/22]Easy Search/Contents/Precautions Before use, read these “Precautions” carefully and use your FOMA properly. Keep this manual in a safe place for future reference. These precautions contain information intended to prevent bodily injury to the user and to surrounding people, as well as damage to property, and must be observed at all times.The following symbols indicate the different degrees of injury or damage that may occur if information provided is not observed and the FOMA terminal is used improperly.The following symbols indicate specific directions.“Precautions” is explained in the following six sections. Handling the FOMA terminal, battery pack, adapters, desktop holder, and FOMA card (general) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 11 Handling the FOMA terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 12 Handling battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 15 Handling adapters and desktop holder . . . . . . . . . . . . . . . . . . . . . . P. 16 Handling FOMA card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 17 Handling mobile phones near electronic medical equipment . . . . . P. 17Precautions (ALWAYS FOLLOW THESE DIRECTIONS)Danger This symbol indicates that “death or serious bodily injury may directly and immediately result from improper use”.Warning This symbol indicates that “death or serious bodily injury may result from improper use”.Caution This symbol indicates that “bodily injury and/or property damage may result from improper use”.Indicates a prohibited action.Indicates not to disassemble the device.Indicates not to handle the device with wet hands.Indicates not to use the device near water or get it wet.Indicates that instructions specified are compulsory (must be followed).Indicates that the power cord must be unplugged from the outlet.dv67_E.book 10 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-3.png)
![11e01_dv67_7e.fm[11/22]Continued on next pageEasy Search/Contents/PrecautionsDo not use, store, or leave the FOMA terminal, battery pack, adapters or FOMA card in locations subject to high temperatures, such as near a fire, in direct sunlight, or inside a car on a hot day.The FOMA terminal may become deformed or malfunction. In addition, the battery pack may leak, overheat, explode, catch fire or suffer performance loss and a reduced service life. Part of the casing may also become hot and cause burns.Do not attempt to disassemble or modify. In addition, do not attempt to solder.May cause accidents such as fire, bodily injury, electric shock or malfunction. In addition, the battery pack may leak, overheat, explode or catch fire.Do not get the FOMA terminal, battery pack, adapters or FOMA card wet.Contact with water, pet urine, and other liquids may cause overheating, electric shock, fire, malfunction or bodily injury. Be attentive to where and how you use the handset.Use only the battery packs and adapters specified by NTT DOCOMO for use with the FOMA terminal.The use of devices other than those specified may cause the FOMA terminal, battery pack or other devices to leak, overheat, explode, catch fire or malfunction.Do not place the battery pack, FOMA terminal, adapters, or FOMA card inside cooking appliances such as microwave ovens or pressure cookers.The battery pack may leak, overheat, explode or catch fire, and the FOMA terminal and adapters may overheat, emit smoke or catch fire. The internal circuitry may also be damaged.Do not subject the FOMA terminal to strong impacts or throw it.The battery pack may leak, overheat, explode or catch fire. Other devices may also be damaged or cause a fire.Do not allow conductive materials (such as metal objects and pencil lead) to come into contact with the charger terminal or external device terminal. In addition, do not insert such objects.The battery pack may short-circuit and cause a fire or malfunction.Make sure to turn off the mobile phone in locations such as gas stations where flammable gas is generated.In addition, do not charge the battery. It may cause a gas explosion or fire.To use Osaifu-Keitai in locations such as gas stations, make sure to turn off the power in advance (If the IC card lock is set, disable the lock before turning off the power).If you notice anything unusual, such as an unusual odor, overheating, discoloration or deformation during use, charging or storage, immediately follow the instructions below.1. Unplug the power cord from the outlet or cigarette lighter socket.2.Turn off the FOMA terminal.3. Remove the battery pack from the FOMA terminal.Continued use (charging) may cause overheating, explosion, or fire. In addition, the battery pack may leak.Handling the FOMA terminal, battery pack, adapters, desktop holder, and FOMA card (general)DangerWarningdv67_E.book 11 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-4.png)
![12e01_dv67_7e.fm[12/22]Easy Search/Contents/PrecautionsDo not leave the FOMA terminal on unstable surfaces, such as on a wobbling table or sloped surface.The FOMA terminal may fall and cause injury or be damaged.Do not store the FOMA terminal in locations that are subject to humidity, dust or high temperatures.May cause a malfunction.If being used by a child, have a guardian teach him/her the proper handling procedures. In addition, check that the child is using the FOMA terminal as directed.May result in bodily injury.Keep the FOMA terminal out of the reach of young children.A young child may swallow components or suffer other bodily injury.Be very careful when using the FOMA terminal connected to adapters repeatedly or for long periods of time.The FOMA terminal, battery pack or adapters may become warm if i-appli, Videophone, or 1Seg is used for a long time while charging.Touch high temperature areas for a prolonged period of time may cause skin irritations, itchiness, or low-temperature burn in some people.Do not aim the Infrared port towards the eyes.May cause eye injury. In addition, do not aim or direct the Infrared port towards another Ir device as this may cause the device to malfunction.Do not point the illuminated light directly at someone’s eyes.Do not use Picture Light near people’s faces. Eyesight may be temporarily affected leading to accidents.Precautions:The picture light source used for this product may emit the light over the safety level for eyes when operations such as undirected adjustments are intentionally made. Therefore, do not disassemble the terminal.CAUTION:Use of controls, adjustments or performance of procedure other than those specified herein may result in hazardous radiation exposure.As the emission level from Picture Light LED used in this product is harmful to the eyes, do not attempt to disassemble the cabinet.Servicing is limited to qualified servicing station only.CautionHandling the FOMA terminalWarningEN60825-1:1994 A1:2002 & A2:2001CLASS1 LED ProductPicture Lightdv67_E.book 12 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-5.png)
![13e01_dv67_7e.fm[13/22]Continued on next pageEasy Search/Contents/PrecautionsDo not put the FOMA terminal in the place where it could be affected by an expanded airbag, e.g., on the dashboard.If the air bag inflates, the FOMA terminal may hit you or others around you, resulting in bodily injury or damage to the FOMA terminal or other property.If you are using electronic medical equipment, do not put the FOMA terminal in your breast pocket or in the inside pocket of your jacket.Using the FOMA terminal in close proximity to electronic medical equipment may cause the equipment to malfunction.Do not allow water or other liquids, metal, flammable material, or other foreign objects to enter the FOMA card or microSD Card port on the FOMA terminal.May cause a fire, electric shock or other malfunctions.Do not shine the light at anyone driving a car or other vehicles.This may prevent a driver from driving safely and cause a traffic accident.Turn off the FOMA terminal in areas where the use of mobile phones is prohibited, such as in aircraft or hospitals.The FOMA terminal may interfere with the operation of electronic devices and electronic medical equipment. In addition, if Auto power ON function is set to ON, disable this function before turning off your mobile phone. Follow the instructions given by the respective medical facilities regarding the use of mobile phones on their premises. In addition, actions such as using on a mobile phone aboard aircraft are prohibited and may be punishable by law.During a call in which hands-free is set, keep the FOMA terminal away from the ears.When you attach the earphone/microphone to the FOMA terminal to play games or music, do not make the volume too loud.Excessive high volume may damage your hearing. Also it may prevent you from hearing the ambient sounds and cause an accident.If you have a weak heart, take extra precautions when setting functions such as the Vibrator and Ring tone volume for incoming calls.Various settings may have effects on your heart.If you hear thunder while using the FOMA terminal outdoors, immediately turn it off and move to a safe location.There is a risk of being struck by lightning and suffering electric shock.Turn the FOMA terminal off near high-precision electronic devices or devices that use weak electronic signals.The FOMA terminal may interfere with the operation of electronic devices.Take particular care with the following devices:Hearing aids, implanted cardiac pacemakers, implanted cardioverter-defibrillators, or other electronic medical equipment. Fire alarms, automatic doors, and other equipment controlled by electronic signals. If you use an implanted cardiac pacemaker, implanted cardioverter-defibrillator or other electronic medical equipment, contact the respective manufacturer or vendor to check whether the operation of the equipment is affected by signals.dv67_E.book 13 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-6.png)
![14e01_dv67_7e.fm[14/22]Easy Search/Contents/PrecautionsIn case that the display part or camera lens is damaged, make sure to pay attention to a broken glass and the exposed inside of the FOMA terminal.The surface of the display is covered by a protective film or the surface of camera lens are covered by a plastic panel so as to minimize the possibility of glass scattering. However, touching the broken or exposed parts may cause injury.Do not swing the FOMA terminal by its strap, etc.The FOMA terminal may hit you or others around you, resulting in bodily injury or damage to the FOMA terminal or other property.When using Motion tracking, confirm the safety of surroundings, hold the FOMA terminal securely and do not swing it around more than necessary.Use Motion tracking to operate by tilting and shaking (or swinging) the FOMA terminal. The FOMA terminal may hit people or objects, if shaken (or swung) too much, and cause a serious accident or damage, etc.If using Motion tracking with the FOMA terminal to which metallic straps or others are attached, be careful not to hit people or objects with the straps.May result in bodily injury or damage to the FOMA terminal or other property.If the display is broken and the liquid crystal then leaks, do not lick or inhale the liquid or get the liquid on your skin.If the liquid comes into contact with your eyes or mouth, immediately rinse your eyes or mouth with clean water and see a doctor.If the liquid comes into contact with your skin or clothes, immediately wipe it off with alcohol, and wash with water and soap.May result in loss of eyesight and harm to your skin.While the ring tone is ringing or a melody is played on the FOMA terminal, do not put the ears closer to the speaker.This may cause hearing loss.On the surface of the display, there is a protective film for securing the safety (for preventing the reinforced glass panel from shattering) in case of the damage caused by a drop, impact, etc. Do not forcibly peel off or scratch this film.Using the FOMA terminal with the film removed may cause a bodily injury when the display is damaged.Using the FOMA terminal in an automobile may sometimes affect the electronic equipment in some vehicle models.In such cases, stop using the FOMA terminal, as this could impede safe driving.Cautiondv67_E.book 14 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-7.png)
![15e01_dv67_7e.fm[15/22]Continued on next pageEasy Search/Contents/PrecautionsUse of the FOMA terminal may cause skin irritations such as itchiness, rashes or eczema in some people. If this occurs, immediately stop using the FOMA terminal and seek medical treatment.The following parts contain metals.Do not close the FOMA terminal on your fingers or objects such as the strap.May result in bodily injury or cause a malfunction.Watch 1Seg in a well-lit place, keeping a certain distance from the screen.Otherwise, eyesight may be decreased.Check the type of battery using the information printed on the battery pack label.Do not touch terminals with metallic objects such as wires. In addition, do not carry or store the battery pack with metallic necklaces, etc.The battery pack may leak, overheat, explode or catch fire.If you are having difficulty fitting the battery pack to the FOMA terminal, do not use excessive pressure to force the battery into place. Check that the battery pack is facing the correct direction before you attach it.The battery pack may leak, overheat, explode or catch fire.Do not throw the battery pack into a fire.The battery pack may leak, overheat, explode or catch fire.Do not puncture, hit with a hammer or step on the battery pack.The battery pack may leak, overheat, explode or catch fire.If the battery fluid comes into contact with your eyes, do not rub your eyes but immediately rinse your eyes with clean water. Then seek prompt medical treatment.May result in loss of eyesight.If any trouble is found on the battery pack due to an external impact such as a deformation or scratches caused by a drop, immediately stop using it.The battery pack may leak, overheat, explode or catch fire. Other equipment may also be damaged or catch fire.If the battery pack is not fully charged after the specified time has elapsed, stop charging.The battery pack may leak, overheat, explode or catch fire.If the battery pack leaks or emits an unusual odor, immediately stop use and move it away from any flame or fire.The battery fluid is flammable and could ignite, causing a fire or explosion.Part Material Surface treatmentSurface of FOMA terminal (display) Magnesium CoatingExternal connector terminalSUSNickel platingInside microSD Memory Card slotCharger terminal Gold platingHandling battery packLabel Battery typeLi-ion00 Lithium-ionDangerWarningdv67_E.book 15 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-8.png)
![16e01_dv67_7e.fm[16/22]Easy Search/Contents/PrecautionsPrevent your pet from biting the battery pack.The battery pack may leak, overheat, explode or catch fire. Other equipment may also be damaged or catch fire.Do not dispose of used battery packs in ordinary garbage.May cause fires or damage to the environment. Place tape over the terminals to insulate unnecessary battery packs, and take them to a docomo Shop, retailer or institution that handles used batteries in your area.Do not charge a wet battery pack.The battery pack may overheat, catch fire or explode.If the battery fluid comes into contact with your skin or clothing, stop using the FOMA terminal immediately and rinse it off thoroughly with clean water.May cause injuries to your skin.Do not use if the adapter’s cord or power cord is damaged.May cause electric shock, overheating or fire.Never use the AC adapter or desktop holder in humid locations such as a bathroom.May result in electric shock.The DC adapter should only be used in negative grounded vehicles. Never use this adapter in positive grounded vehicles.May cause a fire.Do not touch the FOMA terminal or adapters if you hear thunder.There is a risk of being struck by lightning and suffering electric shock.Take care not to short-circuit the charging terminal when connected to an outlet or cigarette lighter socket. Also, take care not to allow any part of your body (hands, fingers, etc.) to come into contact with the charging terminal.May result in a fire, equipment malfunction, electric shock or bodily injury.Place the adapter and desktop holder on stable surfaces when charging. In addition, do not cover or wrap the adapter or desktop holder with clothing or bedding.The FOMA terminal may detach, overheat, or cause a fire or malfunction.Do not place heavy objects on the adapter’s cord or power cord.May cause an electric shock or fire.Do not handle the cord of the adapters, the desktop holder, and plug with wet hands.May result in electric shock.CautionHandling adapters and desktop holderWarningdv67_E.book 16 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-9.png)
![17e01_dv67_7e.fm[17/22]Continued on next pageEasy Search/Contents/PrecautionsAlways use the specified power supply and voltage.Using the incorrect voltage may cause a fire or malfunction. When using overseas, use the AC adapter that is available overseas.AC adapter: 100V ACDC adapter: 12/24V DC (for negative grounded vehicles only)AC adapter available overseas: 100 to 240V AC (Connect only with household AC outlet)If the fuse in the DC adapter blows, always replace it with a fuse of the specified type.Using the fuse other than the specified one may cause a fire or malfunction. Refer to the respective manuals for information on the correct fuse specifications.Wipe off any dust on the power plug.May cause a fire.When plugging the AC adapter into the outlet, make sure that no metallic straps or other metallic objects are caught between the plug and the socket.May cause electric shock, short-circuiting or fire.Always grasp the power plug when unplugging the adapters from the outlet or cigarette lighter socket. Do not forcibly pull by the adapter’s cord or power cord.Pulling on the cord may damage the cord and cause an electric shock or fire.Unplug the power cord from the outlet when not using for a long time.May cause an electric shock, fire, or malfunction.Should water or other liquids enter the adapters, remove the power plug from the outlet or cigarette lighter socket immediately.May cause an electric shock, smoke emission or fire.Always unplug the power plug from the outlet or cigarette lighter socket before cleaning the adapters.May result in electric shock.Be careful with the cutting surface when detaching the FOMA card (IC).May cause injuries to your hand or fingers.The precautions detailed here conform to the guidelines drawn up by the Electromagnetic Compatibility Conference Japan, regarding the protection of electronic medical equipment from signals emitted by mobile phones.Observe the following in hospitals or other medical facilities. Do not take your FOMA terminal into operating rooms, ICUs (Intensive Care Units) or CCUs (Coronary Care Units). Turn off your FOMA terminal inside hospital wards. Turn off your FOMA terminal even when you are in an area outside hospital wards, such as a hospital lobby, since electronic medical equipment may be in use nearby. Where a medical facility has specific instructions prohibiting the carrying and use of mobile phones, observe those instructions strictly. If Auto power ON function is set to ON, disable this function before turning off your mobile phone.Handling FOMA cardCautionHandling mobile phones near electronic medical equipmentWarningdv67_E.book 17 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-10.png)
![18e01_dv67_7e.fm[18/22]Easy Search/Contents/PrecautionsTurn off your FOMA terminal in crowded places such as rush-hour trains in case somebody nearby is using an implanted cardiac pacemaker or implanted cardioverter-defibrillator.Electromagnetic signals may affect the operation of implanted cardiac pacemakers and implanted cardioverter-defibrillators.If you have an implanted cardiac pacemaker or an implanted cardioverter-defibrillator, always carry or use your FOMA terminal at least 22 cm away from your implant.Electromagnetic signals may affect the operation of implanted cardiac pacemakers and implanted cardioverter-defibrillators.Patients receiving medical treatment away from a hospital or medical facility (e.g. home treatment) who are using electronic medical equipment other than implanted cardiac pacemakers or implanted cardioverter-defibrillators should consult the respective manufacturers for information regarding the effects of signals on the equipment.Electromagnetic signals may affect the operation of electronic medical equipment. Do not expose to water. FOMA terminal, battery pack, adapters and FOMA card are not waterproof. Do not use in humid or steamy areas such as bathrooms and avoid exposing to rain and other forms of moisture. If FOMA terminal is carried close to skin, perspiration may cause internal components to corrode and result in malfunction. Note that if problem is found to be due to moisture, handset and parts are not covered by warranty and in some cases may be irreparable. Even where repairs are possible, repair charges will be incurred since damage is not covered by warranty. Clean only with a soft and dry cloth (such as the type used for eyeglasses). The surface of the handset’s LCD has a special coating to improve the visibility of the color display. Forceful rubbing of LCD with a dry cloth may scratch LCD surface. Handle the handset carefully and clean using a soft and dry cloth (such as the type used for eyeglasses). Note also that LCD coating may peel off or stain if moisture or soiling is left on the surface for a long period. Never use chemicals such as alcohol, thinners, benzene or detergents, as these agents may erase the printing on the handset or cause discoloration. Occasionally clean terminals with a dry cotton swab, etc. Unclean terminals may result in poor connections and loss of power. Keep terminal clean with a dry cotton swab, etc.Take care of the terminal while cleaning it. Do not place the handset near an air conditioning vent. Condensation formed due to rapid changes in temperature may cause internal corrosion and lead to malfunction. Do not apply excessive force to the FOMA terminal and battery pack when using them. Carrying the handset in a tightly packed bag, or sitting on the handset in your pocket may cause a damage to display, other internal components or battery pack, or result in malfunction. Keeping an external connector device plugged into the external connector terminal (earphone/microphone terminal) may cause a damage to the connector or result in malfunction. Read the manuals supplied with the FOMA terminal, adapters, and desktop holder carefully. Do not rub or scratch the display with metal, etc. May scratch the handset and cause malfunction or damage.Handling precautionsGeneral notesdv67_E.book 18 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-11.png)
![19e01_dv67_7e.fm[19/22]Easy Search/Contents/Precautions Avoid using the handset in extremely high or low temperatures. Use the FOMA terminal within the range of a temperature between 5℃ and 35℃ and a humidity between 45% and 85%. Using the handset close to landline phones, TVs or radios may affect the operation of such equipment. Move as far away as possible from such items before use. Keep a separate memo and note information stored in the FOMA terminal.DOCOMO shall not be liable for any loss of content. Do not drop or otherwise subject the FOMA terminal to severe impact.May damage the handset and cause malfunction. When connecting an external connector device to the external connector terminal (earphone/microphone terminal), do not put it in obliquely or do not pull it while it is plugged in.May damage the handset and cause malfunction. Do not close the FOMA terminal on strap, etc.May damage the handset and cause malfunction. FOMA terminal may become warm during using or charging but this is not a malfunction. Do not leave the camera in direct sunlight. May cause discoloration or burn-in. Use the FOMA terminal with the external connector terminal cover and microSD Card slot cover on. Dust, water and others enter inside and cause a malfunction. Do not use the FOMA terminal without the back cover. May detach the battery pack or cause malfunction or damage. Do not cover the surface of the display, keys, or buttons with an extremely thick sticker. May cause malfunction. Do not paste a label or sticker on the back of the FOMA terminal display.The FOMA terminal is caught by the label or sticker when opened or closed, and it may cause malfunction or damage. While using a microSD Card, do not remove the card or turn off the FOMA terminal. May cause data loss or malfunction. Never place a magnetic card near or in the FOMA terminal.The stored magnetic data in cash cards, credit cards, telephone cards, floppy disks, etc. may be erased. Never place magnetized items near the FOMA terminal.Putting highly magnetized items closer may cause a malfunction. Battery pack is a consumable product. Though usage time varies with use, change battery if battery level is extremely low even after fully charged. Purchase a specified new battery pack. Charge battery in areas where ambient temperature is between 5°C and 35°C. Always charge the battery before the first use or after not using battery for a long time. The usage time for a battery pack depends on the usage and deterioration of battery pack. Depending on usage, the battery pack may swell as it approaches the end of its service life but this will not cause problems. Note the followings when the battery pack is stored for a long term. The storage with the battery pack fully charged (immediately after charging is completed)The storage with no battery level (cannot turn the FOMA terminal on)May lower the performance or shorten the life of the battery pack. The second or third level of the battery pack icon is recommended as the battery level for long-term storage.Notes about the FOMA terminalNotes about battery packdv67_E.book 19 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-12.png)
![20e01_dv67_7e.fm[20/22]Easy Search/Contents/Precautions Charge battery in areas where ambient temperature is between 5°C and 35°C. Do not charge battery pack in the following locations:Areas with high humidity or dust, or in areas exposed to strong vibrationsClose to landline phones, TVs, radios, etc. Adapters may become warm during charging but this is not a malfunction. Do not use DC adapter to charge battery when the car engine is not running. May cause car battery to run down. When using an outlet with a feature to prevent the plug from being removed accidentally, follow instructions in the outlet user’s guide. Do not subject to strong force or impacts. Also, do not disfigure the charger terminals. May cause a malfunction. Do not apply unnecessary force when inserting/removing the FOMA card. FOMA card may become warm during using but this is not a malfunction. Customer is responsible for malfunctions arising from inserting FOMA card into a different IC card reader/writer. Always keep IC area clean. Clean only with a soft and dry cloth (such as the type used for eyeglasses). Keep a separate memo and note information stored in the FOMA card. DOCOMO shall not be liable for any loss of content. To protect the environment, please take any unnecessary FOMA cards to a docomo Shop or retailer. Avoid using in extremely high or low temperatures. Do not damage, touch haphazardly or short-circuit the IC. May cause data loss or malfunction. Do not drop or otherwise subject the FOMA card to severe impact. May cause a malfunction. Never bend or place heavy objects on the FOMA card. May cause a malfunction. Do not insert the FOMA card to the FOMA terminal with a label or sticker attached on the card. May cause a malfunction. The FOMA terminal supports the security function that meets the Bluetooth specification for the security during communication using Bluetooth function. However, the security may not be sufficient depending on the configuration. Take care of the security while making communication using Bluetooth function. Even if any leak of data or information occurs while making communication using Bluetooth function, DOCOMO shall not be liable for any loss of content. With the FOMA terminal, use headset, hands-free, audio, keyboard, dial-up communication, object push and serial port. Also, the audio/video remote-control may be available depending on the audio (only with compatible Bluetooth devices). Radio frequenciesThe radio frequencies the Bluetooth function of the FOMA terminal uses are as follows:Notes about adapters Notes about FOMA card Notes on using Bluetooth functiondv67_E.book 20 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-13.png)
![21e01_dv67_7e.fm[21/22]Easy Search/Contents/PrecautionsThis wireless device uses 2.4 GHz band. The modulation system is the FH-SS system and a coverage distance is 10 m or less. All radio frequencies are used and the frequencies for mobile object identifiers shall not be avoided. The FeliCa reader/writer function in the FOMA terminal uses weak electric waves in the handling of which does not require a license of radio station. The frequency in use is the 13.56 MHz band. When another reader/writer is being used nearby, keep enough distance from it. Make sure that there is no radio station using the same frequency band in the nearby area. Never use the FOMA terminal that is modified. Using a modified device violates the Radio Law. The FOMA terminal has acquired the certification of conformity with technical regulations for the specified radio station based on the Radio Law, and the “Technical Conformity Mark ” is printed on the model nameplate of the FOMA terminal as a proof. If the screws of FOMA terminal are removed and a modification is given to the inside, the certification of conformity with technical regulations will become invalid. Never use the FOMA terminal without the valid certification. Doing so violates the Radio Law. Be careful when using the FOMA terminal while driving a motor vehicle. While driving, using a mobile phone in hand is regarded as a punishable act. If there is no choice but to receive a call, use hands-free and tell the caller that you will “call back” and then pull over to a safe place to make a call. Use the Bluetooth function only in Japan. The Bluetooth function in the FOMA terminal conforms to the domestic radio wave standards and is authorized. Using the function overseas may result in punishment. Use the FeliCa reader/writer function only in Japan. The FeliCa reader/writer function in the FOMA terminal conforms to the domestic radio wave standards. Using the function overseas may result in punishment. Cautions on using Bluetooth devices Bluetooth operates at radio frequencies assigned to the in-house radio stations for a mobile object identifier that have to be licensed and is used in production lines of a factory, specific unlicensed low power radio stations, and amateur radio stations (hereafter, referred to “another radio station”) in addition to industrial, scientific, medical devices, or home electric appliances such as microwave ovens.1. Before using this product, make sure that “another radio station” is not operating nearby.2. If radio interference between this product and “another radio station” occurs, avoid interference by moving immediately to another place or “turning off the power”.3. Contact the number listed in “General Inquiries” on the back of this manual for further details.FeliCa reader/writerCautiondv67_E.book 21 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-14.png)
![e02_dv67_7e.fm[23/50]23Before Using the HandsetComponent names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24Viewing display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Optical TOUCH CRUISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Setting and selecting menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Displaying Support Book. . . . . . . . . . . . . . . . . . . . . . . . .<Support Book>39Using FOMA card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <FOMA card>39Attaching/Removing battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Checking battery level. . . . . . . . . . . . . . . . . . . . . . . . . . . .<Battery level>47Turning power ON/OFF . . . . . . . . . . . . . . . . . . . . . . . <Power ON/OFF>48Changing screen display to English . . . . . . . . . . . . . .<Select language>48Making initial setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<Initial setting>48Setting date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . <Date settings>49Notifying the other party of your phone number . . . . . . <Notify caller ID>50Checking your own phone number . . . . . . . . . . . . . . . . . <Own number>50dv67_E.book 23 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-15.png)
![24e02_dv67_7e.fm[24/50]Before Using the Handset Key illustrations are examples and may look different from actual keys.Component names and functionsfegdc315v2n498tm76hokqpwajbkilrsuUsing earphoneConnect an earphone compatible with external connector terminal (sold separately). When using an earphone which does not support external connector terminal, connect with a plug adapter (sold separately).ConnectorFlat-plug earphone terminal Flat-plug connector of flat-plug earphone/microphone with switch (sold separately)Connection example for flat-plug earphone/microphone with switch (sold separately)dv67_E.book 24 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-16.png)
![e02_dv67_7e.fm[25/50]25Continued on next pageBefore Using the Handset1Earpiece Listen to the other party’s voice. Listen to Record message/Voice memo.2Sub camera Use to shoot still pictures of yourself. Use to send images of yourself during a Videophone call.3Main display (nP. 28)4, (;): Optical TOUCH CRUISER (nP. 34) Slide the finger to perform the same operations as those for w of Multi-guide key.5i (,): i-mode/Operation guidance key Press to use i-mode (nP. 160). Press to execute the functions of the operation guidance (nP. 27).6m: Mail/Operation guidance key Press to use mail functions (nP. 126). Press to execute the functions of the operation guidance (nP. 27). 7s: Start/Hands-free/Eco key Press to make or receive a voice call. Press to use hands-free (nP. 53). Press to set the Eco mode (Power saver) (nP. 97).81 to 9, 0, *, #: Dial/Text input keys Press to enter phone numbers or texts.9$: Multi/Quick search/VeilView key Press to use Multi Assistant (nP. 372). Press to use Quick search (nP. 382). Press to enable/disable the VeilView (nP. 106).aMouthpiece/Microphone Sends out your own voice.bBrightness sensor (nP. 98) The sensor detects the brightness of the surrounding area and automatically adjusts the display brightness and turns on/off the keypad backlight. Do not cover the sensor area with your hand or a sticker. May interfere with the sensor.cwt: Multi-guide key Move the cursor to select an item and execute or set (nP. 27).dC: Camera/TV/Operation guidance key Press to activate the camera/1Seg (nP. 206, P. 229). Press to execute the functions of the operation guidance (nP. 27).ea: Phonebook/Operation guidance key Press to use the phonebook (nP. 83). Press to execute the functions of the operation guidance (nP. 27).fc (J): i-Channel/Clear key Press to display the channel list (nP. 191). Press to return to the previous screen. Press to delete texts or phone numbers.gH: Power/End key Press for 2+ seconds to turn the power on/off (nP. 48). Use to end the function being activated and return to stand-by display.hy: MAP/GPS key Press to activate GPS compatible i-appli (nP. 303). Press to check your present location. (nP. 301).iSub display (nP. 28)jmicroSD Card slot (nP. 338)kFOMA antenna The FOMA antenna is built in. To speak in better conditions, do not cover the antenna area by hand.l1Seg antenna (nP.000) A 1Seg antenna is built in. To receive in better conditions, do not cover the antenna area by hand.mCalled/Charging/Data transfer LED Flashes while receiving a call, etc. (nP. 103). Illuminates while charging (nP. 43). Illuminates/Flashes while connecting the FOMA terminal with PC (nP.000).nExternal connector terminal This is a terminal used while charging, connecting the earphone, etc. Connect to an external device such as AC adapter/DC adapter or FOMA USB Cable with Charge Function 02 (sold separately) (nP. 45, P.000).oCharger terminal (nP. 46) This is a terminal for charging with the desktop holder.p&: Side key Press with the FOMA terminal closed to display the clock on the sub display. Press for 1+ seconds with the FOMA terminal closed to turn on/off Picture Light.qSpeakers Emits ring tones, music, etc. Emits the other party’s voice during hands-free operation.dv67_E.book 25 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-17.png)
![26e02_dv67_7e.fm[26/50]Before Using the HandsetrStrap ringsMain camera Use to shoot still pictures or moving pictures (nP. 200). Use to send a camera image shot during a Videophone call to the other party (nP. 52).tPicture Light Illuminates/Flashes while activating the camera (nP. 200). Illuminates/Flashes during shooting (nP. 206, P. 209).uInfrared port Use for the Ir communication (nP. 354). Use for the Ir remote control (nP. 358).vb mark The IC card is included (The IC card cannot be removed). Use Osaifu-Keitai holding the b mark up to the scanning device (nP. 289). Use to send and receive data via the iC communication (nP. 358).wBack cover (nP. 42) A radio frequency-preventing sticker is attached on the back of the back cover. Do not peel off this sticker.■Key operations for stand-by displayOperate each key in the stand-by display to perform the following action.Key Operations Operations when pressing for 1+ secondsiTo display iMenu (nP. 160)To display the i-appli software list screen (nP. 263)mTo display Mail menu (nP. 126)To display the compose message screen (nP. 126)CTo activate camera (nP. 206)To activate 1Seg (nP. 229)aTo display phonebook (nP. 83)To display the phonebook entry screen (nP. 79)tTo display start menu (nP. 36)To display the Lock selection screen (nP. 115)rTo display the Redials list screen (nP. 56)To display Sent messages history (nP. 146)qTo display the Received calls list screen (nP. 56)To display Received messages history (nP. 146)oTo display the i-Widget screen (nP. 285)To display the earpiece volume adjustment screen (nP. 89)pTo display Shortcut menu (nP. 382)sTo display the phone number entry screen (nP. 53)To set the Eco mode (Power saver) (nP. 97)H– To turn off the power* (nP. 48)cTo display channel list (nP. 191)1To enter 1To execute assigned functions (nP. 382)2To enter 23To enter 34To enter 4To activate the Quick Stand-by Display Setting mode (nP. 94)5To enter 5To set font size collectively (nP. 105)6To enter 6To turn on/off the Bluetooth power (nP. 396)7To enter 7To display the Voice memos/Recorded messages screen (nP. 71, P. 385)8To enter 8To start to use 2in1 (nP. 420)To switch 2in1 mode (nP. 421)9To enter 9To reset Kisekae Tool settings (nP. 101)To reset Font style setting (nP. 105)0To enter 0To enter +*To enter bTo enable/disable the Public mode (Drive mode) (nP. 67)#To enter #To enable/disable the Manner mode (nP. 93)Key Operations Operations when pressing for 1+ secondsdv67_E.book 26 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-18.png)
![27e02_dv67_7e.fm[27/50]Before Using the Handset* Press for 2+ seconds.To use the FOMA terminal, open it (normal position) or use it in the Cycloid position. When the FOMA terminal is switched to the Cycloid position for the first time while the stand-by display is displayed, the screen rotation setting screen automatically appears. Set the function to be activated when the FOMA terminal is switched to the Cycloid position while the stand-by display is displayed in the normal position (nP. 96). When carrying, keeping the FOMA terminal closed as shown in the diagram for step 1 is recommended.■Cycloid positionUse to select or execute the menus that appear in the operation guidance. The following shows the keys assigned to select or execute the menu items that appear in the guidance.■Normal position■Cycloid position$To activate Quick search (nP. 382)To enable/disable VeilView (nP. 106)yTo activate GPS compatible i-appli (nP. 303)To check your present location (nP. 301)Opening the FOMA terminal1Open carefully with both hands.2Open the display until easily viewable position.Key Operations Operations when pressing for 1+ seconds 3Rotate the display 90° to the right.4 When rotating the FOMA terminal display, do not rotate in the opposite direction or further than 90°. When talking in the Cycloid position, use the earphone/microphone (sold separately) or use hands-free. When talking with the earpiece, switch to the normal position.Multi-guide key and Operation guidance keyituCavmaCwm i tdv67_E.book 27 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-19.png)
![28e02_dv67_7e.fm[28/50]Before Using the Handset■Operation guidance menuIn the operation guidance, menus appear according to the function being used and situation.The following table describes examples of the main operation guidance menus that appear. Icons are shown in the order of main display and sub display.Main displaySub displayThe following shows a screen when Sub Clock display (nP. 97) is set to [Stdby clock(L)].OK Sets the selected itemSubmenu Displays the SubmenuAgree Checks selected image, music, etc.Back Returns to the previous screenPlay/Stop Plays/Stops i-motion, music, etc.Full Displays selected images, etc. in full screenShow all Displays sorted files, etc. as a list1/1 or ZoomeDisplays selected images, etc. in actual/reduced sizeMail Displays the compose message screenSend Sends a mailCancel Cancels the operation such as receiving a mailSelAll/ClrAll Selects/Disables all selectable items(Up to 50 items can be selected/disabled depending on the function)Page ▲/Page ▼Scrolls the display by pageClose Closes the Submenu, etc.Viewing display12345 7pmlkjihgnt<b cq or f e dszy vw6 a8 9xu1s tu hi 82 b 2k lc<2>z 2dv67_E.book 28 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-20.png)
![e02_dv67_7e.fm[29/50]29Continued on next pageBefore Using the Handset1Signal status When [A] appears, the handset is outside the service area or in a place with no signal. Signal icon can be changed (nP. 102).2Battery level (nP. 47) Flashes during charging. This icon can be changed (nP. 47, P. 102).3i-mode/Full Browser (nP. 160, P. 163)4SSL/TLS (nP. 160, P. 163, P. 162) When this icon appears while Multi Assistant is used, function such as i-mode, Full Browser, i-appli or Software update is being used with Multi Assistant.5i-appli (nP. 263)*i-appli is set as the stand-by display, but cannot be used. Does not appear in the i-Widget screen.6GPS (nP. 301, P. 304)7Ir communication/Bluetooth communication/External device8i-mode mail/SMS/Area Mail received (nP. 134)* Appears when Area mail is received.9Message R/F received (nP. 152)]/aIndication of the signal strength]no pStrong Weak"/bIndicates battery level7 = I J AA B N OIndicates i-mode/Full Browser statusoSSL/TLS compatible sites are viewedSSL/TLS compatible Internet web pages are viewedSSL/TLS pages are viewedGi-appli is being activatedi-appli stand-by is being activatedNi-appli stand-by is set*Ii-appliDX is being activatedi-appliDX stand-by is being activatedQi-appliDX stand-by is set*A (blue)Location request menu is set to [Loc. provision:ON]/[Reject No. unset]Location request menu is set to [Permission sched.] and Location provision is permittedA (gray) Location request menu is set to [Permission sched.] and Location provision is rejectedBGPS positioningJData is communicated with another device using the Ir communication function (nP. 354)Data is sent using the Ir remote control (nP. 358)#Data is communicated with another device using the Bluetooth function (nP. 399)NConnected to commercially available Bluetooth compatible keyboard (nP. 397)t (green) Connected to an external device and transmitting packetst (red) Connected to an external device and sending/receiving packet datauConnected to an external device and transmitting 64K dataUhHv[/x*Indicates the status of the i-mode mail/SMS/Area Mail receptionIndicates the status of the memory to store received mailABJIndicates the reception status of the Message R/FIndicates the status of the memory to store Message R/Fdv67_E.book 29 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-21.png)
![30e02_dv67_7e.fm[30/50]Before Using the HandsetaStorage status of i-mode center (nP. 134, P. 152) May not appear even if messages are held at the i-mode center.bmicroSD Card (nP. 338)cClock display (nP. 49) Small clock icon can be changed (nP. 102).d1Seg being recorded (nP. 236)eRecord message (nP. 69) When there are messages, [D] to [P] appears, indicating the total number of both types of messages. When there are three Record messages (voice calls) and two Record messages (Videophone), [k] appears.fSilent (nP. 89)gVibrator (nP. 91)hManner mode (nP. 93)iPublic mode (Drive mode) (nP. 67)ji-appli call (nP. 279)kIC card lock (nP. 290)lRestriction (nP. 110, P. 116)mHands-free (nP. 53, P. 396)nAlarm (nP. 237, P. 374, P. 378)* Appears only when an Alarm is set for that day.WGIXSTKL Indicates the storage status of the mail and Message R/F^ (gray)/mmicroSD Card is inserted^ (pink)/lmicroSD Card is being useda/rAppears when microSD Card is not recognizeda1Seg is being recorded]Record message is set[The phone ring volume [Silent] is setbVibration mode is setZ/fManner mode is set_/dPublic mode (Drive mode) is setaNew i-appli callH/cIC card is lockedR/iSecret mode is setSSecret data is being editedTKeypad dial lockU/eAll lock is setV/eFunction lock is setW/eKeypad dial lock and Function lock are setK (red)/eSecret mode, Function lock and Keypad dial lock are setK (blue)/eSide key lock, Secret mode, Function lock and Keypad dial lock are setX/eSide key lock is set; (red) Hands-free in progress; (green) USB hands-free in progresslMute in progress (only when in the Cycloid position)MBluetooth hands-free in progress\Alarm is setSchedule alarm is set*Reception reserve alarm is set*Recording reserve alarm is set*Wakeup TV is set*dv67_E.book 30 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-22.png)
![e02_dv67_7e.fm[31/50]31Continued on next pageBefore Using the HandsetoMusic&Video Channel program reservation (nP. 247)pi-mode mail send reservation (nP. 134)qEarphone/microphone connection (nP. 390)rUSB mode (nP.000)sFOMA card errortSelf mode (nP. 112)uBluetooth (nP. 390) Illuminates during stand-by for Bluetooth registration, flashes at approximately 1-second intervals during stand-by for Bluetooth connection, and flashes at approximately 0.5-second intervals during Bluetooth connection. Does not appear while displaying 4.vVeilView (nP. 106) Does not appear while displaying d or w.w3G/GSMxStatus of Comics setting (nP. 365) Does not appear while displaying m or z.yToruCa (nP. 292) Does not appear while displaying m, x or z.zReceiving information (nP. 193) Does not appear while displaying m.<Multitask (nP. 372)Indicates functions that are running. While two or more functions are running, the Multitask icon also appears on the sub display.0Appears 12 hours before Music&Video Channel program distribution=Mail with send reservation;Mail failed to be automatically sentsWhile Auto answer setting is set to [ON] with an earphone/microphone (sold separately) connectedxDesktop holder and accompanying USB cable or FOMA USB Cable with Charge Function 02 (sold separately) is connected in the Communication modeR/jAppears when FOMA card is malfunctioning or not insertedB/hAppears when a card other than the FOMA card is insertedg/gSelf mode is setL (blue)/yStand-by for Bluetooth registrationStand-by for Bluetooth connectionConnected to BluetoothL (gray)/yDuring power saver mode for Bluetooth (Appears when data is not transmitted from the FOMA terminal for a set length of time)PVeilView is setS3G network (Packet transmission is available)Q3G network (Packet transmission is available/Call is not available)R3G network (Packet transmission is not available)VGSM/GPRS network (Packet transmission is available)UGSM/GPRS network (Packet transmission is available/Call is not available)TGSM/GPRS network (Packet transmission is not available)IFrame display is setHPage display is setQUnread ToruCaC/zNew informationdv67_E.book 31 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-23.png)
![32e02_dv67_7e.fm[32/50]Before Using the Handset>Operation in progress Does not appear while displaying <.■Flash display in sub displayFlash movies are viewed in the sub display when Sub Clock display is set to [Graphic stdby clock] or calls and messages are received.gFour or more applications are running3Shoot moving picture4Character reader (OCR)*Videophone 5Bar code readerhVoice call ]Card readertPhonebook ,Information reader#Modem transmission (appears during data transmission))ShotdecovVoice recorderiSoftware update wScheduleCMap/GPS yText memo, Stand-by memo(Bluetooth function zCalculatorjReceive via Ir/iC/USB/Bluetooth communication6Manga&BookReader=Quick searchli-appli >ToruCami-mode, i-Channel, Full Browser, Internet movie player{Alarm8Timer/i-concier }microSDXReceive information 9General settingspMail, SMS, Message R/F, Check new messages 0Voice memo/Record messageqMail/Decome-Anime/SMS being composed7Document Viewerf1Seg|Received calls ^Reception reserve/Recording reserve alarm sounds;Received messages history"Own number *Data Security Service!Redial uData box:Sent messages history sMUSIC2Shoot still picture \Presentation assistwA screen other than stand-by appears in the main display microSD Card is referred to as [microSD] or [SD] on the FOMA terminal (nP. 338). Some of the screen shots in this manual have been modified or abbreviated. The display for the FOMA terminal is manufactured using high-precision technology, but it may occasionally contain dots that fail to light or that remain permanently lit. This is not a malfunction. The display time of sub display follows the light duration setting. The icon of sub display cannot be changed.Stand-by([Graphic stdby clock]) Receiving mailReceivingdv67_E.book 32 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-24.png)
![33e02_dv67_7e.fm[33/50]Before Using the HandsetDisplay stock icons in stand-by when a call is missed or new mail is received. In stand-by, select stock icons to check notice details.Stock icon type*1 When the 2in1 mode is set to [Dual mode], the number of [A mode] and [B mode] appears each.*2 The displayed message differs depending on the menu screen or position.1In stand-by, a stock icon appears/t.:When both the stock icon and the popup message appear, switch the selection between the stock icon and the popup message with u.:Place the pointer over the stock icon in the stand-by display with Optical TOUCH CRUISER to display the message. Press t to check details.2Select the stock icon/t.:After the details are checked, the stock icon and message disappear.Checking notices with stock iconIcon Message PageBxx missed call*1 P. 69FRecorded messages Fxx message/Axx message P. 71Exx voice mail*1 P. 412Cxx mail message P. 135, P. 157Lxx New Message R P. 152Qxx New Message F P. 152Bxx New record movie (Large memory of the FOMA terminal handset) P.000Fxx New record movie (microSD) P.000Dxx new ToruCa P. 2925New auto send result P. 1346Update complete P. 499Check update P. 499Update required P. 497Check for update P. 497DUSB mode setting P.000MessageNumber of entriesStock icontDownload successful (Music&Video Channel) P. 247gDownload failed (Music&Video Channel) P. 2474Charge limit exceeded P. 387@Send loc - No resp P. 306Send loc - Resp P. 306Send loc - Failed P. 306aNew i-appli call P. 279GCustom menu/Basic menu/Menu*2 P. 37 Stock icons do not appear while the i-motion set as stand-by is played or the i-appli stand-by is being activated.Icon Message Pagedv67_E.book 33 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-25.png)
![34e02_dv67_7e.fm[34/50]Before Using the HandsetIn the i-Widget screen, multiple i-Widget can be activated simultaneously and viewed as a list. For details on operation of i-Widget nP. 284Display popup messages in the stand-by display when information is received. Activate i-concier with the popup messages to check information details.1In stand-by, a popup message appears/t.:Alternatively, select the popup messages in the stand-by display with Optical TOUCH CRUISER and press t to activate i-concier.2Select the popup message/t.:The popup message disappears after activating i-concier.Use the Optical TOUCH CRUISER to perform the same operations as those for w of Multi-guide key (e.g. moving the cursor or scrolling the screen) (Some operations may differ). Move the pointer or cursor just as covering the whole operating range of the Optical TOUCH CRUISER with finger. The pointer or cursor moves in conjunction with sliding of the finger.Displaying and operating i-WidgetActivating i-concier with popup message1Area where Widget appli is pasted2Setting status icons for Widget appli For details on the setting status icons nP. 2633Operation guidance Available menus appear.i-Widget screen312“ひつじのしつじくん®”©NTT DOCOMO Calendar or Stand-by memo does not appear while a popup message appears.Optical TOUCH CRUISER Depending on the screen, the Optical TOUCH CRUISER may not be available.Operating range of Optical TOUCH CRUISERdv67_E.book 34 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-26.png)
![35e02_dv67_7e.fm[35/50]Before Using the Handset■Moving pointerIn the stand-by display, in the Custom menu screen, etc., move the pointer ([L], [K], etc.) up/down, left/right or diagonally to select an item. In some Custom menus, the pointer shape varies or the pointer is not supported. Select icons displayed in the stand-by display and press t to perform the following action.Stock icon: To check information detailsi-Channel ticker: To display the channel listStand-by memo: To display the Stand-by memo input screenPopup message: To activate i-concierStand-by clock (when Clock display is set to [ON(Large)]): To activate Schedule The pointer moving speed varies depending on the finger sliding speed.■Moving cursorIn the Basic menu or Submenu screen, move the cursor up/down and left/right in the same way as w of Multi-guide key. When there are multiple pages, move the cursor to switch the pages.1In the Custom menu, select [Settings]/[General settings]/[TOUCH CRUISER set]/[Usage settings].2Select the setting/t.1In the Custom menu, select [Settings]/[General settings]/[TOUCH CRUISER set]/[Pointer speed]/[Scroll speed].2Select the speed/t.Set, change or save functions from the menu screens. Menus are classified by function (nP. 446).e.g.) Custom menu screene.g.) Basic menu screenCautions when using the Optical TOUCH CRUISER Do not operate the Optical TOUCH CRUISER using a pointed metallic object such as a pen tip. May cause scratches or a failure of the sensor. Note that putting a sticker, etc. to the operating range may cause a malfunction.Setting whether to use Optical TOUCH CRUISER <Usage settings>Setting pointer speed/scroll speed <Pointer speed/Scroll speed>Setting and selecting menuThe explanations in this manual are based on how to retrieve a function from the Custom menu.dv67_E.book 35 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-27.png)
![36e02_dv67_7e.fm[36/50]Before Using the HandsetSet the start menu that displayed when t is pressed while displaying the stand-by in the normal position.1In stand-by, press t/[Settings]/[Disp/LED/Power saver]/[Menu priority].2Select the start menu/t/[Yes].Switch the start menu temporarily. When the stand-by display reappears, the start menu returns to the one set in Menu priority.Horizontal display menu that allows to select menus in the Cycloid position is available.Setting start menu <Menu priority>Start menu CharacteristicsCustom menu The preset Kisekae Tool (nP. 99) can be selected and set. Each Kisekae Tool consists of different functions and designs. Kisekae Tools can be downloaded from sites and used.Preset Kisekae Tools$$ $$シンプル (Simple) ダイレクトメニュー※Preset Kisekae Tools differ depending on the FOMA terminal handset color.Basic menu Select the icon displayed on the menu to retrieve the function. Also, input the function number, which is assigned to setting menu, to quickly retrieve the function to be used.Switching set start menu temporarily To display the Horizontal display menu, press t while displaying the stand-by in the Cycloid position. To return to the set start menu, set to the normal position while displaying the Horizontal display menu.Stand-by displayaBasic menuCustom menutHorizontal display menuSet to the Cycloid positiondv67_E.book 36 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-28.png)
![e02_dv67_7e.fm[37/50]37Continued on next pageBefore Using the Handset■Submenu operations for the Custom menu screen[Assign function] nP. 100[Rst func asgnment] nP. 100[Reset menu screen] nP. 101[Reset menu history] nP. 100[Menu priority] nP. 36[Operation guide]/select an item/t■Submenu operations for the Basic menu screen[Icon settings]/[Icon image] nP. 102/[Dsp icon name] nP. 102[Set background] nP. 102[Reset menu screen] nP. 102[Menu priority] nP. 36[Operation guide]/select an item/t For details on operating shortcut menu nP. 382 For details on the available functions nP. 446 Use w and the Optical TOUCH CRUISER in all menus. Press the dial key corresponding to the menu item number (U, V, W, etc.) to select a function. However, in the Custom menu/Horizontal display menu, a function may not be selected by using the menu item numbers. The method for selecting functions may differ depending on the Kisekae Tool set for the Custom menu. Press c to re-select a function, and the previous screen reappears. Press H to return to stand-by.■Retrieving from the Basic menuRetrieving a function from each menuWhen a stock icon (nP. 33) appears in stand-by, select [G] to show the each menu.The way of activating camera (shooting still pictures) with Multi guide key or Optical TOUCH CRUISER is explained as an example below. For , (;), use the Optical TOUCH CRUISER to select an item. The following shows the screen operated with the Optical TOUCH CRUISER.,(;)t,(;)tCustom menu When [Camera] appearsWhen the camera (shooting still pictures) is activatedor wt or ut■Retrieving from the Custom menu,(;)tBasic menu When [Camera func]appearsWhen the camera (shooting still pictures) is activated,(;)tor wt or utdv67_E.book 37 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-29.png)
![38e02_dv67_7e.fm[38/50]Before Using the Handset In the Basic menu, input the function number, which is assigned to setting menu, to quickly retrieve the function to be used (nP. 446). Refer to the menu list for details on [シンプル(Simple)] (nP. 467).Select the Pict area in the stand-by display with Optical TOUCH CRUISER and press t to display the Quick Settings. Select each key to activate the corresponding function. Press c to return to the stand-by display. For details on the available functions nP. 466 When the Custom menu screen is changed by Kisekae Tool, the operation may differ from the description in this manual. In this case, switch the menu screen to the Basic menu (nP. 36) or perform the Reset menu screen (nP. 101).■Retrieving from the Horizontal display menuHorizontal display menu When [Camera] appearsWhen the camera (shooting still pictures) is activated,(;)torwt,(;)torwtRetrieving a function from the Simple menuRetrieving a function from Quick Settings,(;)tor wt,(;)tor wtSimple menu When [Camera func] appearsWhen the camera (shooting still pictures) is activatedStand-by display Quick SettingsPict area , (;)tdv67_E.book 38 ページ ２００９年４月２２日 水曜日 午後５時３３分](https://usermanual.wiki/Sharp/HRO00101.Users-Manual-1/User-Guide-1111261-Page-30.png)