Sharp HRO00165 Cellular Phone User Manual operationa manuatl

Sharp Corporation Cellular Phone operationa manuatl

operationa manuatl

’11.●

ɜġIf you lose your handset or have it stolen, immediately take the steps necessary for suspending the use of the handset.

ɜġIf the handset you purchased is damaged, bring your handset to a repair counter specified by DOCOMO after returning to

Japan.

To prevent damage to the environment,

bring used battery packs to a docomo

service counter, a docomo agent or a

recycle center.

Sales:

Manufacturer: SHARP Corporation

Don’t forget your mobile phone… or your manners!

When using your mobile phone in a public place, don’t forget to show common courtesy and consideration for

others around you.

Universal number

international prefix

International call access code

for the country you stay

-81-3-6718-1414

(toll free)

-8005931-8600*

From land-line phones

From DOCOMO mobile phones

Failures encountered overseas

* You might be charged a domestic call fee according to the call rate for the

country you stay.

For international call access codes for major countries and universal number

international prefix, refer to DOCOMO International Services website.

You are charged a call fee to Japan when calling from a land-line phone, etc.

ɦ If you use SH-01D, you should dial the number +81-3-6832-6600

(to enter “+”, touch “0” for a while).

* You might be charged a domestic call fee according to the call rate for the

country you stay.

For international call access codes for major countries and universal number

international prefix, refer to DOCOMO International Services website.

You are charged a call fee to Japan when calling from a land-line phone, etc.

ɦ If you use SH-01D, you should dial the number +81-3-6718-1414

(to enter “+”, touch “0” for a while).

-8000120-0151*

Universal number

international prefix

-81-3-6832-6600

(toll free)

International call access code

for the country you stay

Loss or theft of handset or payment of

cumulative cost overseas

From DOCOMO mobile phones

From land-line phones

(available 24 hours a day)(available 24 hours a day)

Unavailable from land-line phones, etc.

ɡFrom DOCOMO mobile phones

(In Japanese only)

Unavailable from land-line phones, etc.

(No prefix) 151 (toll free)

From DOCOMO mobile phones

(In Japanese only)

Repairs

(Business hours: 24 hours (open all year round))(Business hours: 9:00 a.m. to 8:00 p.m.)

ɦ Unavailable from part of IP phones.

0120-800-000

(toll free)

ɡFrom land-line phones

(In Japanese only)

0120-005-250 (toll free)

ɦ Service available in: English, Portuguese, Chinese, Spanish, Korean.

(Business hours: 9:00 a.m. to 8:00 p.m. (open all year round))

ɦ Unavailable from part of IP phones. (No prefix) 113 (toll free)

General Inquiries

ɜ Please confirm the phone number before you dial.

For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo Shop etc. near you on

the NTT DOCOMO website.

NTT DOCOMO websiteȁhttp://www.nttdocomo.co.jp/english/

ɦ Unavailable from part of IP phones.

ɡFrom land-line phones

(In Japanese only)

0120-800-000

(toll free)

INSTRUCTION MANUAL

SH-01D

’11.11 (1st Edition)

11L SM188

’11.11

㸭㸭

6Contents/Precautions

Before use, read these “Precautions” carefully

and use your handset properly.

Keep this manual in a safe place for future

reference.

These precautions contain information intended

to prevent bodily injury to the user and to

surrounding people, as well as damage to

property, and must be observed at all times.

The following symbols indicate the different

degrees of injury or damage that may occur if

information provided is not observed and the

handset is used improperly.

The following symbols indicate specific

directions.

Precautions (ALWAYS

FOLLOW THESE

DIRECTIONS)

Danger

This symbol

indicates that “death

or serious bodily

injury may directly

and immediately

result from improper

use”.

Warning

This symbol

indicates that “death

or serious bodily

injury may result

from improper use”.

Caution

This symbol

indicates that “minor

injury and/or

property damage

may result from

improper use”.

Indicates a prohibited action.

Indicates not to disassemble the

device.

Indicates not to handle the device

with wet hands.

Indicates not to use the device

near water or get it wet.

Indicates that instructions

specified are compulsory (must

be followed).

Indicates that the power cord must

be unplugged from the outlet.

Contents/Precautions

“Precautions” is explained in the following

seven sections.

Handling the handset, battery pack, adapters

(including charger micro USB adapter), desktop

holder and docomo mini UIM card 

(general) . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 7

Handling the handset . . . . . . . . . . . . . . . . . . P. 8

Handling battery pack . . . . . . . . . . . . . . . . . P. 11

Handling adapters (including charger micro USB

adapter) and desktop holder . . . . . . . . . . . . P. 12

Handling docomo mini UIM card. . . . . . . . . P. 13

Handling near electronic medical equipment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 13

Viewing 3D images . . . . . . . . . . . . . . . . . . . P. 14

Do not use, store or leave the

equipment in locations subject to

high temperatures, such as near a

fire, in direct sunlight or inside a

vehicle on a hot day.

May cause fires, burns or bodily injury.

Do not place the equipment inside

cooking appliances such as

microwave ovens or pressure

cookers.

May cause fires, burns, bodily injury or electric shock.

Do not attempt to disassemble or

modify the equipment.

May cause fires, burns, bodily injury or electric shock.

Do not get the equipment wet with

water, drinking water, pet urine, etc.

May cause fires, burns, bodily injury or electric shock.

Refer to the following for details on waterproofness.

n“Waterproof/Dust-proof” on P. 21

Use only the battery packs and

adapters (including charger micro

USB adapter) specified by NTT

DOCOMO for use with the handset.

May cause fires, burns, bodily injury or electric shock.

Do not subject the equipment to

strong force or impacts or throw it.

May cause fires, burns, bodily injury or electric shock.

Do not allow conductive materials

(such as metal objects and pencil

lead) to come into contact with the

charger terminal, external connector

terminal or earphone/microphone

terminal. In addition, do not insert

such objects.

May cause fires, burns, bodily injury or electric shock.

Do not cover or wrap the equipment

with bedding, etc. when using or

charging.

May cause fires or burns.

Handling the handset, battery

pack, adapters (including

charger micro USB adapter),

desktop holder and docomo

mini UIM card (general)

Danger

Warning

8Contents/Precautions

Be sure to turn off the handset and

not to charge the battery in locations

such as gas stations where

flammable gas is generated.

May cause a gas explosion or fire.

To use Osaifu-Keitai in locations such as gas stations,

be sure to turn off the power in advance (If the

Osaifu-Keitai lock setting is activated, disable the lock

before turning off the power).

If you notice anything unusual, such

as an unusual odor, overheating,

discoloration or deformation during

use, charging or storage, immediately

follow the instructions below.

Unplug the power cord from the

outlet or cigarette lighter socket.

Turn off the handset.

Remove the battery pack from the

handset.

May cause fires, burns, bodily injury or electric shock.

Do not leave the equipment on

unstable surfaces, such as on a

wobbly table or sloped surface.

May fall and cause injury.

Do not store the equipment in

locations that are subject to

humidity, dust or high temperatures.

May cause fires, burns or electric shock.

If being used by a child, have a

guardian teach him/her the proper

handling procedures. In addition,

check that the child is using the

equipment as directed.

May result in bodily injury.

Keep the equipment out of the reach

of young children.

A young child may swallow the equipment or suffer

other bodily injury.

Be very careful when using the

handset connected to adapters

(including charger micro USB

adapter) repeatedly or for long

periods of time.

The handset, battery pack or adapters (including

charger micro USB adapter) may become warm if 1Seg

etc. is used for a long time while charging.

Touching high temperature areas for a prolonged

period of time may cause skin irritations, itchiness or

low-temperature burns in some people.

Do not aim the infrared port towards

the eyes.

May cause eye injury.

Do not aim the infrared port towards

home electric appliances with an

infrared device during infrared

communication.

May interfere with the operation of infrared devices and

cause an accident.

Caution

Handling the handset

Warning

Contents/Precautions

Do not point the illuminated light

directly at someone’s eyes.

Especially when you shoot still

pictures or moving pictures of young

children, keep 1 m or more distance

from them.

Do not use Mobile light near people’s faces. Eyesight

may be temporarily affected leading to accidents.

Precautions:

The

mobile

light source used for this product may emit

the light over the safety level for eyes when operations

such as undirected adjustments are intentionally made.

Therefore, do not disassemble the handset.

CAUTION:

Use of controls, adjustments or performance of

procedure other than those specified herein may result

in hazardous radiation exposure. As the emission level

from Mobile light LED used in this product is harmful to

the eyes, do not attempt to disassemble the cabinet.

Servicing is limited to qualified servicing station only.

Do not allow water or other liquids,

metal, flammable material or other

foreign objects to enter the docomo

mini UIM card or microSD Card slot

on the handset.

May cause fires, burns, bodily injury or electric shock.

Do not shine the light at anyone

driving a car or other vehicles.

May prevent a driver from driving safely and cause a

traffic accident.

Turn off the handset in areas where

the use of mobile phones is

prohibited, such as in aircraft or

hospitals.

May interfere with the operation of electronic devices

and electronic medical equipment.

Follow the instructions given by the respective medical

facilities regarding the use of mobile phones on their

premises.

Actions such as using a mobile phone aboard aircraft

are prohibited and punishable by law.

However, follow the instructions on use of the handset

given by the airline if the handset can be used aboard

aircraft by setting the handset such as setting it not to

emit radio wave.

Keep the handset away from the ears

during a call in which hands-free is set

or while the ring tone is ringing.

When you attach the earphone/

microphone, etc. to the handset to

play games, music, etc., do not make

the volume too loud.

Excessive high volume may damage your hearing.

Also, it may prevent you from hearing ambient sounds

and cause an accident.

Earphone Signal Level

The maximum output voltage for the music player

function, measured in accordance with EN 50332-2, is

30.0 mV.

If you have a weak heart, take extra

precautions when setting functions

such as the vibrator and ring tone

volume for incoming calls.

May have harmful effects on your heart.

EN60825-1:1994 A1:2002 & A2:2001

CLASS1

LED Product

Mobile light

10 Contents/Precautions

If you are using electronic medical

equipment, contact the respective

manufacturer or dealer to check

whether the operation of the

equipment is affected by signals.

May interfere with the operation of electronic medical

equipment, etc.

Turn off the handset near

high-precision electronic devices or

devices that use weak electronic

signals.

May interfere with the operation of electronic devices.

Take particular care with the following devices

Hearing aids, implanted cardiac pacemakers, implanted

cardioverter-defibrillators or other electronic medical

equipment. Fire alarms, automatic doors, and other

equipment controlled by electronic signals. If you use

an implanted cardiac pacemaker, implanted

cardioverter-defibrillator or other electronic medical

equipment, contact the respective manufacturer or

dealer to check whether the operation of the equipment

is affected by signals.

If the display part or camera lens is

damaged, be careful of broken glass

and the exposed inside of the

handset.

The surface of the display is covered by a protective

film while the surface of the camera lens is covered by a

plastic panel so as to minimize the possibility of glass

scattering. However, touching the broken or exposed

parts may cause injury.

Do not swing the handset by its

antenna, strap, etc.

May hit you or others around you, resulting in bodily

injury.

Do not use a damaged handset.

May cause fires, burns, bodily injury or electric shock.

For using a motion sensor and

geomagnetic sensor, check the

safety around, hold the handset and

do not swing them more than

necessary.

May cause injury etc.

If the display is broken and the liquid

crystal then leaks, do not get the

liquid on your skin (face, hands,

etc.).

May result in loss of eyesight and harm to your skin.

If the liquid comes into contact with your eyes or mouth,

immediately rinse your eyes or mouth with clean water

and see a doctor.

If the liquid comes into contact with your skin or clothes,

immediately wipe it off with alcohol, and wash with

water and soap.

The surface of the display is covered

with a protective film for ensuring

the security against any damages

caused by the handset being

dropped or receiving a strong

impact etc. Do not remove the film

forcibly or damage it.

Using the equipment with the film removed may

damage the display and cause bodily injury.

If you use the handset in a vehicle,

contact the vehicle manufacturer or

dealer to check whether the

operation of the vehicle is affected

by signals.

May interfere with the operation of electronic equipment

in some vehicle models. In such cases, stop using the

handset.

Caution

Contents/Precautions

Use of the handset may cause skin

irritations such as itchiness, rashes

or eczema in some people. If this

occurs, immediately stop using the

handset and seek medical treatment.

For details on materials of each part n“Material list”

on P. 15

Look at the display in a well-lit place,

keeping a certain distance from the

screen.

Otherwise, eyesight may be weakened.

Check the type of battery using the information

printed on the battery pack label.

Do not touch terminals with metallic

objects such as wires. In addition,

do not carry or store the battery

pack with metallic necklaces, etc.

The battery pack may catch fire, explode, overheat or

leak.

Check that the battery pack is facing

the correct direction before you

attach it to the handset. If you are

having difficulty fitting the battery

pack to the handset, do not use

excessive pressure to force the

battery into place.

The battery pack may catch fire, explode, overheat or

leak.

Do not throw the battery pack into a

fire.

The battery pack may catch fire, explode, overheat or

leak.

Do not puncture, hit with a hammer

or step on the battery pack.

The battery pack may catch fire, explode, overheat or

leak.

If the battery fluid, etc. comes into

contact with your eyes, do not rub

your eyes but immediately rinse

your eyes with clean water. Then

seek prompt medical treatment.

May result in loss of eyesight.

If any trouble such as a deformation

or scratches caused by dropping the

battery pack is found, never use it.

The battery pack may catch fire, explode, overheat or

leak.

If the battery pack leaks or emits an

unusual odor, immediately stop

using it and move it away from any

naked flames or fire.

The battery fluid is flammable and could ignite, causing

a fire or explosion.

Do not allow a pet to bite the battery

pack.

The battery pack may catch fire, explode, overheat or

leak.

Handling battery pack

Label Battery type

Li-ion00 Lithium-ion

Danger

Warning

12 Contents/Precautions

Do not dispose of used battery

packs in ordinary garbage.

May cause fires or damage to the environment. Place

tape over the terminals to insulate unnecessary battery

packs, and take them to a docomo Shop, retailer or

institution that handles used batteries in your area.

Do not use or charge a wet battery

pack.

The battery pack may catch fire, explode, overheat or

leak.

If the battery fluid, etc. leaks, do not

get the liquid on your skin (face,

hands, etc.).

May result in loss of eyesight and harm to your skin.

If the liquid comes into contact with your eyes, mouth,

skin or clothes, immediately rinse them with clean

water.

If the liquid, etc. comes into contact with your eyes or

mouth, see a doctor immediately after rinsing your eyes

or mouth.

Do not use if the cord of the adapter

(including charger micro USB

adapter) is damaged.

May cause fires, burns or electric shock.

Never use the AC adapter or the

desktop holder in humid locations

such as a bathroom.

May cause fires, burns or electric shock.

The DC adapter should only be used

in negative grounded vehicles.

Never use it in positive grounded

vehicles.

May cause fires, burns or electric shock.

Do not touch adapters (including

charger micro USB adapter) if you

hear thunder.

May cause electric shock.

Take care not to short-circuit the

charger terminal when connected to

an outlet or cigarette lighter socket.

Also, take care not to allow any part

of your body (hands, fingers, etc.) to

come into contact with the charger

terminal.

May cause fires, burns or electric shock.

Do not place heavy objects on the

cord of the adapter (including

charger micro USB adapter).

May cause fires, burns or electric shock.

When plugging/unplugging the AC

adapter into/from the outlet, do not

allow metallic straps or other

metallic objects to come into contact

with the prongs of the plug.

May cause fires, burns or electric shock.

Do not handle the cord of the

adapters (including charger micro

USB adapter), the desktop holder or

the outlet with wet hands.

May cause fires, burns or electric shock.

Caution

Handling adapters (including

charger micro USB adapter)

and desktop holder

Warning

Contents/Precautions

Always use the specified power

supply and voltage.

When using overseas, use the AC

adapter that is available overseas.

Using the incorrect voltage may cause fire, burns or

electric shock.

AC adapter: 100V AC

DC adapter: 12/24V DC (for negative grounded

vehicles only)

AC adapter available overseas: 100 to 240V AC

(Connect only with a household AC outlet)

If the fuse in the DC adapter blows,

always replace it with a fuse of the

specified type.

May cause fires, burns or electric shock. Refer to the

respective manuals for information on the correct fuse

specifications.

Wipe off any dust on the power plug.

May cause fires, burns or electric shock.

Fully plug the AC adapter into the

outlet.

May cause fires, burns or electric shock.

Always grasp the adapters when

unplugging the power plug from the

outlet or cigarette lighter socket. Do

not forcibly pull by the cord of the

adapter (including charger micro USB

adapter).

May cause fires, burns or electric shock.

Unplug the power plug from the

outlet or cigarette lighter socket

when not using for a long time.

May cause fires, burns or electric shock.

Should water or other liquids enter

the equipment, remove the power

plug from the outlet or cigarette

lighter socket immediately.

May cause fires, burns or electric shock.

Always unplug the power plug from

the outlet or cigarette lighter socket

before cleaning the equipment.

May cause fires, burns or electric shock.

Be careful with the cutting surface

when detaching the docomo mini

UIM card.

May cause bodily injury.

The precautions detailed here conform to the

guidelines drawn up by the Electromagnetic

Compatibility Conference Japan, regarding the

protection of electronic medical equipment

from signals emitted by mobile phones.

Handling docomo mini UIM card

Caution

Handling near electronic

medical equipment

Contents/Precautions

Do not insert the docomo mini UIM card to

the handset with a label or sticker attached

on the card.

May cause a malfunction.

The handset supports the security function

that meets the Bluetooth specification for

security during communication using

Bluetooth functions. However, the security

may not be sufficient depending on the

configuration. Take care of the security while

making communication using Bluetooth

function.

Even if any leak of data or information

occurs while making communication using

Bluetooth function, DOCOMO shall not be

liable for any loss of content.

The handset can use headset, hands-free,

audio, keyboard, object push, serial port and

phone book access. Also, audio/video

remote-control may be available depending

on the audio (only with compatible Bluetooth

devices).

Radio frequencies

The radio frequencies the Bluetooth function

of the handset uses are as follows.

2.4: This radio equipment uses the 2.4 GHz band.

ӲFH: The modulation system is the FH-SS system.

ӳ1: The estimated coverage distance is 10 m or

less.

: All radio frequencies between 2400

MHz and 2483.5 MHz are used and the frequencies

for mobile object identifiers shall not be avoided.

Wireless LAN (WLAN) uses radio waves to

communicate information. Therefore, it has

an advantage of freely connecting to the LAN

within the service area. On the other hand, if

security setting is not set, it is possible for a

malicious third party to intercept the

communication contents or hack. It is

recommended to set security setting at your

own risk and judgement.

Notes on using Bluetooth

function

ӱġ Ӳġ ӳġ

Ӵġ

Cautions on using Bluetooth devices

Bluetooth operates at radio frequencies

assigned to the in-house radio stations for

a mobile object identifier that have to be

licensed and is used in production lines of

a factory, specific unlicensed low power

radio stations, and amateur radio stations

(hereafter, referred to “another radio

station”) in addition to industrial, scientific,

medical devices or home electric

appliances such as microwave ovens.

1. Before using the handset, make sure that

“another radio station” is not operating

nearby.

2. If radio interference between the handset

and “another radio station” occurs,

avoid interference by moving

immediately to another place or “turning

off the power”.

3. Contact the number listed in “General

Inquiries” on the back of this manual for

further details.

Notes about wireless LAN

(WLAN)

20 Contents/Precautions

Wireless LAN

Do not use wireless LAN near magnetic devices

such as electric appliances or AV/OA devices or in

radio waves.

ƦMagnetism or radio waves may increase noises or

disable communications (especially when using a

microwave oven).

ƦWhen used near TV, radio, etc., reception

interference may occur or channels on the TV

screen may be disturbed.

ƦIf there are multiple wireless LAN access points

nearby and the same channel is used, search may

not work correctly.

Radio frequencies

The radio frequencies the WLAN-installed

devices use are indicated on the battery

storage section of the main body of the

handset. The following are the descriptions:

ӱ2.4: This radio equipment uses the 2400 MHz

band.

ӲDS: The modulation system is the DS-SS

system.

ӳOF: The modulation system is the OFDM system.

Ӵ4: The estimated coverage distance is 40 m or

less.

ӵ: All radio frequencies

between 2400 MHz and 2483.5 MHz are used

and the frequencies for mobile object identifiers

shall not be avoided.

Available channels for the handset’s wireless LAN

are between 1 to 13. Note that other channel access

points cannot be connected.

Available channels vary depending on the country.

For use in an aircraft, contact the airline beforehand.

There are restrictions on the use of wireless LAN in

some countries or regions such as France. If you

intend to use wireless LAN overseas, check the local

laws and regulations beforehand.

Cautions on using 2.4 GHz devices

WLAN-installed devices operate at radio

frequencies assigned to the in-house radio

stations for a mobile object identifier (radio

stations requiring a license) used in

production lines of a factory, specific

unlicensed low power radio stations (radio

stations requiring no license), and amateur

radio stations (radio stations requiring a

license) in addition to industrial, scientific,

medical devices or home electric

appliances such as microwave ovens.

1. Before using this device, make sure that

the in-house radio stations for a mobile

object identifier, specific unlicensed low

power radio stations and amateur radio

stations are not operating nearby.

2. If the device causes harmful radio

interference to the in-house radio

stations for a mobile object identifier,

immediately change the radio frequency

or stop use, and contact the number

listed in “General Inquiries” on the back

of this manual for crosstalk avoidance,

etc. (e.g. partition setup).

3. If the device causes radio interference to

specific unlicensed low power radio

stations for a mobile object identifier or

amateur radio stations, contact the

number listed in “General Inquiries” on

the back of this manual for further

details.

Contents/Precautions

The FeliCa reader/writer function in the

handset uses weak electric waves in the

handling of which does not require a license

of radio station.

The frequency in use is the 13.56 MHz band.

When another reader/writer is being used

nearby, keep enough distance from it. Make

sure that there is no radio station using the

same frequency band in the nearby area.

Never use the handset that is modified.

Using a modified device violates the Radio

Law.

The handset has acquired the certification of

conformity with technical regulations for the

specified radio station based on the Radio Law, and

the “Technical Conformity Mark ” is printed on

the model nameplate of the handset as a proof. If

the screws of handset are removed and a

modification is given to the inside, the certification of

conformity with technical regulations will become

invalid. Never use the handset without the valid

certification. Doing so violates the Radio Law.

Be careful when using the handset while

driving a motor vehicle.

Using a mobile phone in hand while driving is

regarded as a punishable act.

However, the punishment has no application in

some cases such as when rescuing sick and injured

people or maintaining public safety.

Use the FeliCa reader/writer function only in

Japan.

The FeliCa reader/writer function in the handset

conforms to the domestic radio wave standards.

Using the function overseas may result in

punishment.

Never change the basic software improperly.

This may be regarded as a conversion of software

and repairs may be refused.

Be careful not to connect the handset to PC

using the microUSB cable for PC (sample) in

areas where the use of mobile phones is

prohibited.

Power may turn on automatically.

There are individual differences in how

people perceive 3D images.

Keep the display parallel to your eyes when

watching 3D images.

SH-01D is waterproof to IPX5*1 and IPX7*2

standards, and dust-proof to IP5X*3 standards if

the external connector terminal cover is

securely closed as well as the back cover is

attached.

*1 IPX5 means that phone keeps functioning after

being subjected to a jet flow (approximately

12.5 liters/min) discharged from a nozzle (inner

diameter: 6.3 mm), from all directions

(approximately 3 m from the handset) for 3

minutes or more.

*2 IPX7 means that SH-01D phone keeps

functioning after it is slowly submerged to depth

of 1 m in static tap water at room temperature,

left there for approximately 30 minutes and

then taken out.

*3 IP5X means the level of dust protection. Phone

keeps functioning in safety after it is left in the

device containing dust (diameter: 75 Ђm or

smaller) for 8 hours, agitated and then taken

out.

FeliCa reader/writer

Caution

Viewing 3D images

Waterproof/Dust-proof

Contents/Precautions

1Securely hold the surrounding

section of camera, put fingers on

the center of the back cover and

hook the tip of a finger under the

concave portion of the back cover

to remove

1Confirm the direction of the back

cover, adjust it to the direction of

the handset and press the

surrounding section (shaded

section) of the back cover securely

to attach

:Make sure there is no space between the

back cover and the handset.

Removing back cover

Attaching back cover

Concave portion

Securely close the back cover. If not closed

securely, the back cover may come off and the

battery pack may fall out due to vibration. May

damage the waterproof/dust-proof performance

and allow water to seep or dust to get in.

The back cover may be damaged if it is inserted

or removed forcibly. Be careful not to apply

excessive force on it.

To maintain waterproof/dust-proof

performance, replacement of parts is required

every 2 years regardless of whether the

handset appears normal or abnormal.

DOCOMO replaces the parts as a chargeable

service. Bring the handset to a repair center

that DOCOMO specifies.

Before Using the Handset

Back up the data saved on a microSD Card and

store in another place. DOCOMO shall not be

liable for any loss or change of the saved data.

Before inserting or removing (including after

unmounting) the microSD Card, turn off the

power, position the back facing upwards and

remove the battery pack. Hold the handset

securely with your both hands. Data may be

damaged or operation may not work properly.

1Remove the back cover (nP. 23)

2Insert the microSD Card slowly with

the metal terminal side turned down

:Do not force the microSD Card in at an angle

or with the wrong side down. 

The microSD Card slot may be damaged.

:Insert the microSD Card slowly with your

fingers until a click is heard.

3Attach the back cover (nP. 23)

1Remove the back cover (nP. 23)

2Gently push the microSD Card

towards inside (1)

:Push the microSD Card until it clicks. It will

eject towards you. Pulling it forcibly may

damage the handset or the microSD Card.

3Remove the microSD Card (2)

:Remove the microSD Card by slowly pulling

it straight out.

4Attach the back cover (nP. 23)

Use the Battery Pack SH31 exclusive to the

handset.

For attaching or removing the battery pack, turn

off the power, position the back facing upwards,

and hold the handset securely with your both

hands.

1Remove the back cover (nP. 23)

Inserting microSD Card

Removing microSD Card

Battery pack

Attaching battery pack

32 Before Using the Handset

2Attach the battery pack

:With the recycle mark side turned up, place

the connector terminal of the handset to that

of the battery pack and attach the battery

pack.

3Attach the back cover (nP. 23)

1Remove the back cover (nP. 23)

2Remove the battery pack

:The battery pack has a tab that makes it

easy to remove. Hook a finger on the tab to

prevent excessive force on it and remove the

battery pack upward.

3Attach the back cover (nP. 23)

The battery pack is not fully charged at the time

of purchase. Be sure to charge the battery

before use.

It is recommended that the accompanying

desktop holder be used for charging to prevent

water from seeping or dust from getting in

caused by forgetting to close the external

connector terminal cover (nP. 34).

The accompanying FOMA charger micro USB

adapter SH01/FOMA charging micro USB

adapter T01 (sold separately) is required to

charge with the AC adapter (sold separately) or

DC adapter (sold separately).

Do not charge for a long time with the power left

on. If the handset is left on after charging is

complete, the battery pack charge decreases.

In that case, the AC or DC adapter charges the

battery again. However, depending on the time

when the handset is disconnected from the AC or

DC adapter, the battery charge level may be low

or the battery may only be usable for a short

time.

If the handset is left for a long time even after the

charging is completed, the battery level may

decrease.

When the battery is empty and the handset is

being charged, charging lamp may not illuminate

immediately. However, charging is in progress.

If the battery empty alert is displayed and the

power cannot be turned on, charge the battery

for a while.

Removing battery pack

Using unnecessary force when attaching or

removing the battery pack may damage the

connector terminal for the battery pack (charger

terminal) on the handset.

With recycle

mark side up

Connector terminal

Tab

Charging

Cautions while charging

Before Using the Handset

While charging, the handset may not turn on

even when charging lamp is illuminated in red.

Charge longer and try turning power on again.

Frequently recharging the battery when its power

is still remaining enough may shorten the life of

the battery pack. It is recommended to use the

battery to a certain level before recharging.

The following figures are estimated times for

charging an empty battery pack with the handset

turned off.

Charging lamp illuminates in red while charging,

and it turns off when charging is completed.

Check that the battery pack has been properly

attached when charging lamp flashes red. The

lamp also flashes red when the battery pack has

reached the end of its service life.

The battery pack can also be charged with the

handset turned on (While charging, the battery

icon appears with [w] superimposed).

When the battery becomes warm, charging may

automatically stop even if the battery has not

been fully charged. Charging resumes after the

temperature lowers to an appropriate

temperature.

For details on time of use nP. 165

Battery pack is a consumable product. Service

time per charge is gradually reduced every time

the battery is charged.

When service time per charge is reduced to

about half of the default time, this means that the

battery pack is approaching the end of its service

life. In such a case, it is recommended to replace

the battery pack as soon as possible. Depending

on usage, the battery pack may swell as it

approaches the end of its service life, but this will

not cause problems.

If watching 1Seg, etc. is available while charging

for a long time, the service life of the battery pack

may become shorter than estimated.

To prevent damage to the environment, bring

used battery packs to a docomo service counter,

a docomo agent or a recycle center.

Estimated charge time and lamp display

FOMA AC Adapter 01/02 Approx. 240 min

FOMA DC Adapter 01/02 Approx. 240 min

Estimated time of use when fully charged

Continuous talk

time

FOMA/3G

Approx. 290 min

GSM

Approx. 450 min

Continuous

stand-by time

FOMA/3G

At rest: Approx. 420 hr

(Network Mode: 3G/

GSM(Auto))

GSM

At rest: Approx. 260 hr

(Network Mode: 3G/

GSM(Auto))

1Seg watching

time

Approx. 190 min

Battery pack service life

34 Before Using the Handset

Refer to user’s guide of FOMA AC Adapter 01/02

(sold separately), FOMA AC Adapter 01 for

Global use (sold separately) or FOMA DC

Adapter 01/02 (sold separately).

FOMA AC Adapter 01 covers only 100V AC.

FOMA AC Adapter 02/FOMA AC Adapter 01 for

Global use covers from 100 to 240V AC.

The shape of the plug for the AC adapter is for

100V AC (for domestic use). To use the AC

adapter of 100 to 240V AC overseas, a

conversion plug adapter that is compatible with

the voltage of your country of stay is required. Do

not use a voltage converter for overseas travel to

charge the battery.

1Turn the arrow side of the AC

adapter connector up and insert it

into the connector terminal of the

desktop holder (1)

:Keep the connector parallel with the desktop

holder and securely push all the way in until it

clicks.

2Insert the AC adapter power plug

into an outlet (2)

3When placing the handset in the

desktop holder, charging lamp

illuminates and charging starts

:Place the handset in the direction of the

arrow and make sure that a click is heard

(3).

4Charging is complete when

charging lamp turns off

:Hold the desktop holder and lift the handset.

AC adapter and DC adapter

Charging with desktop holder

Pull the AC adapter out of the outlet if it is not

used for a long time.

When charging lamp does not illuminate, check

that the handset is placed securely in the

desktop holder.

When placing the handset in the desktop

holder, be careful not to catch a strap, etc.

Charging lamp

Connector

(with the arrow side up)

100V AC

outlet

FOMA AC

Adapter 01/02

Before Using the Handset

[Read the user’s guides of FOMA AC

Adapter 01/02 (sold separately) and FOMA

DC Adapter 01/02 (sold separately)]

1Insert the AC or DC adapter

connector horizontally into the

external connector terminal of the

FOMA charger micro USB adapter

SH01/FOMA charging micro USB

adapter T01 (1)

:Check the direction (front or rear) of the

connector, keep it parallel with the FOMA

charger micro USB adapter SH01/FOMA

charging micro USB adapter T01 and

securely push all the way in until it clicks.

2Open the external connector

terminal cover of the handset and

insert the microUSB plug of the

FOMA charger micro USB adapter

SH01/FOMA charging micro USB

adapter T01 horizontally into the

external connector terminal (2)

:Check the direction (front or rear) of the

microUSB plug and insert it horizontally.

:The following illustration is an example to

insert the FOMA charger micro USB adapter

SH01.

3When inserting the AC adapter

power plug into an outlet or

inserting the DC adapter power

plug into a car cigarette lighter

socket, charging lamp illuminates

and charging starts

Charging with AC adapter/DC

adapter

Connector

(with the arrow

side up)

microUSB plug

(with the character

side up)

External

connector terminal

(with the character

side down)

External connector terminal

Charging lamp

100V AC

outlet

For AC adapter

Cigarette

lighter socket

For DC adapter

36 Before Using the Handset

4When charging lamp turns off,

charging is complete

:When charging is complete, remove the

microUSB plug horizontally from the handset

(1).

:When removing the connector from the

FOMA charger micro USB adapter SH01/

FOMA charging micro USB adapter T01,

always hold the release buttons on both

sides (2) and unplug it horizontally (3). When the handset is turned on, you can charge

the handset by connecting the handset to a PC

with the microUSB cable for PC (sample).

Install the USB driver to the PC in advance.

ƦFor details on installing USB driver, refer to

“Manual for USB Driver Installation” in PDF

format in the following site.

(http://k-tai.sharp.co.jp/support/d/sh-01d/

download/usb/index.html) (in Japanese only)

For details on connecting to a PC nP. 110

1H (for at least 2 seconds)

:When you turn the power on for the first time,

the initial setting screen is displayed. Each

setting item can also be set from menus

(nP. 40).

:If the initial setting screen for docomo service

is displayed, operate by following the

instructions on the screen.

1H (for at least 1 second)/[Power

off]/[OK]

Do not forcibly insert or remove. May cause

damage to the external connector terminal, the

microUSB plug and the connector.

Pull the adapter out of the outlet or cigarette

lighter socket if it will not be used for a long

time.

Do not forcibly pull the external connector

terminal cover. May damage the cover.

Do not place objects near the handset when

charging. May damage the handset.

When using a DC adapter

The DC adapter should only be used in

negative grounded vehicles (12 and 24V DC).

Do not use with the car engine shut off. May

drain the car battery.

Release buttons

The DC adapter fuse (2A) is a consumable. For

replacement, purchase a new fuse at a local

vehicle supply shop.

Refer to the user’s guide of FOMA DC Adapter

01/02 for details.

Charging with microUSB cable

for PC

Turning power ON/OFF

Turning power ON

Turning power OFF

Before Using the Handset

The screen is off and the sleep mode is activated

when H is pressed or the handset is not in use for a

set length of time.

Press H in the sleep mode to deactivate the sleep

mode.

When the power is turned on or the sleep mode is

deactivated, the touch panel is locked.

Drag [J] to [K] to unlock.

Key operation in touch panel unlock screen

To set/disable the manner mode: y (for at least

1 second)

To turn on the mobile light: x (for at least 1

second)

ƦPress any of the keys or touch [J] to turn it off.

To turn off power: H (for at least 2 seconds)

You can operate by touching the touch panel

(display) directly with your finger.

Operations differ depending on the function and

screen in use.

Touch a key or an item displayed on the screen to

select or set it.

1Put your finger on the touch panel

and put it off

Sleep mode

Touch panel lock

If there is an unchecked missed call etc., an icon is

displayed on the unlock screen. If you slide the icon

upward before unlocking the touch panel, the

corresponding screen is displayed.

The mobile light will automatically turn off

approximately 30 seconds after it turns on.

Basic operation

Operation of touch panel

Cautions when using the touch panel

The touch panel is designed to be lightly

touched with your finger. Do not forcefully

press with your finger or press with a pointed

object (fingernail, ballpoint pen, pin, etc.).

In the following cases, the touch panel may

not work even if you touch it. May cause a

malfunction.

Operation with a gloved finger

Operation with a fingernail

Operation with foreign objects placed on

the operation pad

Operation on the touch panel on which a

protective sheet or a sticker is put

Operation while the touch panel is wet

Operation with fingers wet with sweat or

water

Touch

38 Before Using the Handset

When you touch the screen for a while, a menu

may appear depending on the function and screen

in use.

1Keep your finger on the touch panel

Slide your finger up/down while a menu is

displayed etc. to scroll the screen or slide (drag) an

icon, widget, etc. to move it to the desired position

while keeping touching it.

In addition, when you touch a menu or item by

mistake, slide your finger away from the menu or

item to cancel the selection.

1Keep your finger on the touch panel

and slide it

Flick your finger to the left/right in the home screen

etc. to switch pages.

1Move your finger like sweeping the

touch panel

Pinch out/Pinch in while displaying an image etc. to

zoom in/out.

1Put two fingers on the touch panel

and slide them with putting a

distance between two fingers apart

(pinch out)/closer (pinch in)

When a check box is displayed beside the setting

item, you can set it enabled/disabled or [ON]/[OFF]

by touching it.

Example: Wireless and network screen,

Alarm screen

[0]: Enabled, [1]: Disabled

Touch for a while

Slide/Drag

Flick

Pinch out/Pinch in

Operation while using function

Switching the settings

42 Before Using the Handset

If you use Wi-Fi function of the handset, you

can use mail or internet by connecting to your

home, corporate network or access points of

public wireless LAN service.

Packet communication is also available while

Wi-Fi function is enabled. Wi-Fi connection is

prioritized while Wi-Fi connection is set, but the

connection will be automatically switched to that

of 3G/GPRS network once Wi-Fi connection is

terminated. Note that packet communication

charges will be incurred in such cases.

Refer to the manual of your wireless LAN base

unit when using the access point at home.

Operate access point registration near the

access point.

Enable Wi-Fi before setting.

1In the home screen, [R]/

[Settings]/[Wireless &

networks]/[Wi-Fi settings]

2Select an item

Wi-Fi: Enable Wi-Fi function.

Network notification: You get notified by the

notification icon when open Wi-Fi network is

detected.

Wi-Fi sleep policy: Set the timing to switch

Wi-Fi sleep.

Easy Wi-Fi registration: Register

WPS-compatible access point.

Auto login settings: You can set the handset

to log in DOCOMO Public Wireless LAN

Service automatically when you come within

its service area.

Add Wi-Fi network: Register access points

which are not compatible with WPS

manually.

:Available access points are displayed as

items in “Wi-Fi networks”. To connect, select

an access point to be used/[Connect].

ƦIf you select an access point protected by

security, enter the password (security key).

Wi-Fi settings

The radio interference with Bluetooth

devices

Wireless LANs (IEEE 802.11b/g/n) use the

same frequency band (2.4 GHz) as Bluetooth

devices. Therefore, using the wireless LAN

device near a Bluetooth device may cause

radio interference, lowering of communication

speed, noise or connection failure. In this

case, turn off the Bluetooth device or keep the

handset and the wireless LAN device at least

approximately 10 m away from the Bluetooth

device.

[Easy Wi-Fi registration]

The registration process takes a few minutes.

After completion of the registration of the

access point, check that the proper connection

to the access point is acquired.

[Auto login settings]

Separate subscription is required to use

DOCOMO Public Wireless LAN Service.

In some service areas, automatic login function

may be unavailable.

If you set Auto-login to [ON], the handset logs in

automatically when coming within the service

area. Note that high charges may be incurred if

your subscription is Mzone daily plan and you set

Auto-login to [ON].

Before Using the Handset

1In the home screen, [R]/

[Settings]/[Wireless &

networks]/[Wi-Fi settings]/

z/[Advanced]

2Select an item

Use static IP: Specify a static IP address and

set whether to connect to Wi-Fi network.

IP address: Set the IP address.

Gateway: Set the gateway.

Netmask: Set the network mask.

DNS 1: Set the DNS 1.

DNS 2: Set the DNS 2.

1In the home screen, [R]/

[Settings]/[Wireless &

networks]/[Wi-Fi settings]

2Select the connected access

point/[Forget]

:Disconnect with the password retained.

Tethering function that connects Wi-Fi

compatible devices to the Internet by using the

handset as a Wi-Fi access point is available.

You can connect to up to five Wi-Fi compatible

devices simultaneously.

This function is available inside the FOMA

service area. However, this function may be

interrupted depending on the conditions on

communications or on network congestion.

This function is not available when docomo mini

UIM card is not inserted or in cases in which the

FOMA service is canceled or stopped.

1In the home screen, [R]/

[Settings]/[Wireless &

networks]/[Portable hotspot]

2Select an item

Portable Wi-Fi hotspot: Enable the Wi-Fi

tethering.

ƦCheck the details of the precautions before

use.

Portable Wi-Fi hotspot settings: Set the Wi-Fi

tethering settings such as network SSID and

security.

Ʀ[Configure Wi-Fi hotspot]/set each item/

[Save] to set Wi-Fi hotspot. Set security

setting if necessary. The security setting

supports WPA2 PSK.

Help: Display Help information.

This function may become unavailable

according to change of the log-in page contents

of DOCOMO Public Wireless LAN Service. In

this case, log in via the browser.

[Add Wi-Fi network]

This function supports WEP, WPA/WPA2 PSK,

802.1xEAP as the security setting.

Detailed settings

You can confirm the MAC address and the IP

address of the handset in Advanced.

Disconnecting

When you terminated the connection with Wi-Fi

function disabled, enable Wi-Fi function to

connect automatically if the previously

connected access point is available.

Wi-Fi tethering

44 Before Using the Handset

1In the home screen, [R]/[Email]

:Only when an account is not set, the account

setting screen appears.

2Enter mail address and password/

[Next]

:Provider information is preset for some mail

accounts, and a receiving mail server and a

sending mail server are automatically set.

When you use an account whose provider

information is not preset, it is necessary to set

a receiving mail server and a sending mail

server manually. For details on those settings,

contact the Internet service provider you use.

3Enter an account name and your

name/[Done]

1In the home screen, [R]/

[Settings]/[Accounts & sync]/

[Add account]

2Select the account type

3Set up an account

1In the home screen, [R]/

[Settings]/[Accounts & sync]

2Select an account/[Remove

account]/[Remove account]

If you forget your Google account password,

retrieve it.

1In the home screen, [R]/

[Browser]

2Enter “(http://www.google.com/) ” in

the URL entry field/[I]/[more]/

[Sign In]/[Can’t access your

account?]/follow the instructions

on the screen

Setting up mail account

The account which is registered first is

automatically given priority to normal use. To

change the priority, enable [Default account] on

the setting screen for the account on which you

want to place priority.

When the account type is Exchange, entering

“¥UsernameDomain” in the “Domain¥Username”

area is required to set a receiving mail server

manually depending on the provider to use.

Contact the administrator of the server for details.

Setting up Google account, etc.

When activating the application that requires an

account without setting the account, the

account setup screen appears.

Keep a separate memo of the set account and

password.

Deleting your account

Retrieving your Google account

password

Call/Network Services

1In the home screen, [R]/

[Phone]/[Dial]

2Enter a phone number

:Always dial the area code, even when it is a

local number.

:You can set to notify/not to notify the other

party of your phone number for each call by

adding “186”/“184” to the head of the phone

number.

1Call

Make a call. Also, if there is an outgoing

history, touch to enter the latest outgoing

history when the phone number has not

been entered.

2Delete

Delete an entered number.

3Outgoing/Incoming history

4Favorites

Display the phonebook set to [Favorites]

by groups.

5Dial

Display the dial screen.

6Phonebook

7Add to phonebook

8Koe-no-Takuhaibin

For details of Koe-no-Takuhaibin, refer to

P. 76 “Koe-no-Takuhaibin” and the

DOCOMO website.

9SMS

3[0]

4[End] to end the call

1In the home screen, [R]/

[Phone]/[Dial]

2Enter a phone number/[

] (for at

least 1 second)

3Enter a number to send/[0]

Call/Network Services

Making a call

Entering a push-button phone

signal

64 Call/Network Services

WORLD CALL is an international calling service

available from DOCOMO handset in Japan.

WORLD CALL is registered when FOMA

services are registered (excluding users who

did not apply for WORLD CALL).

You can call to about 240 countries and regions

worldwide. Calling to a fixed-phone and mobile

phone overseas is available.

For information on available countries and

telecommunications carriers, refer to “Mobile

Phone User’s Guide [International Services]” or

the DOCOMO International Services website.

WORLD CALL charges are billed with the

monthly FOMA service charges.

Commission and monthly usage fees are free.

Contact “General Inquiries” on the back of this

manual for details on WORLD CALL.

To make an international call through a company

other than DOCOMO, contact the representative

companies for instructions.

Emergency call

Emergency calls Phone number

Emergency call to police 110

Emergency call to fire

station/medical assistance 119

Emergency call at sea 118

The handset supports “Location notification of

emergency call”.

When dialing an emergency number such as

110, 119, and 118, the information of your

location (location information) is automatically

notified to the agency that received the

emergency call (e.g. the police station).

Depending on your location and the reception

status of the signal, the agency that received

the emergency call may not be able to confirm

the exact location.

If you are not sending your caller ID by calling

with “184” added or other means, your location

information and phone number are not notified.

However, if the agency that received the

emergency call considers your location

information and phone number necessary for

important purposes, such as life saving, the

agency can retrieve them regardless of your

settings.

In addition, the area/timing to introduce

“Location notification of emergency call”

depends on the state of preparation in each

agency that receives emergency calls.

In Japan, you cannot call to the emergency

number (110, 119 or 118) from the PIN code

entry screen and PUK (PIN Unlock Key) entry

screen, with a docomo mini UIM card locked.

When calling 110, 119, and 118 from your

handset, the police or fire stations may return

your call for verification purposes. State that

you are calling from a mobile phone, and give

your phone number and exact location.

Remain stationary to ensure that you are not

disconnected while making an emergency call,

and keep handset turned on to receive calls for

approximately 10 minutes afterwards.

Depending on the region, calls to the police or

fire station may not be connected.

International call (WORLD

CALL)

Call/Network Services

The caller ID may not be notified or displayed

correctly depending on some overseas

telecommunications carriers. In this case,

making a call with incoming call history is not

available.

1When a call is received, the ring

tone sounds and the incoming lamp

flashes

:If you press x/y during an incoming call, you

can stop incoming ring tone or vibrator.

2Receive a call

:When [Activate] is displayed, operate after

touching [Activate].

1Accept

You can receive a call.

2Reject

You can reject an incoming call.

3[End] to end the call

1When a call is received, the ring

tone sounds and the incoming lamp

flashes

2z/[Absence Memo]

1When a call is received, the ring

tone sounds and the incoming lamp

flashes

2z/[On hold]

[Calling Method]

When calling to a fixed-line phone: 010/

country code/area code (city code)/the other

party’s phone number/[0]

When calling to a mobile phone: 010/country

code/the other party’s phone number/[0]

ƦFor the other parties’ phone numbers and area

codes (city codes) that begin with “0”, omit the

“0” when entering (except some countries or

regions such as Italy).

ƦAlternatively, enter “009130-010” as usual or “+”

instead of “010”.

Receiving a call

Incoming lamp

Answering by answering memo

Placing a call on hold

104 File Management

Use infrared communication to send and

receive data to and from other handsets which

also support infrared communication.

Send and receive phonebook entries, sp-mode

mails, profiles, memos, schedules, bookmarks,

ToruCa, data shot by camera, etc.

The handset infrared communication function

complies with IrMC™ 1.1 standard. However,

depending on the data, some data may not be

sent or received even when the other party’s

handset complies with IrMC™ 1.1 standard.

The handset Ir send and receive functions

comply with IrSimple™ standard.

Infrared communication is not available in

Offline(airplane) mode.

To enter docomo application password or Lock

No. and to enter authentication code are required

for sending and receiving all data items. The

authentication code is a password exclusively for

infrared communication. Before starting data

communication, the sender and receiver must

enter the same user-specified four-digit code.

Face the Infrared ports of the receiver’s and sender’s

handset each other and set the distance between

them to approximately 20 cm or less as shown.

While doing infrared communication, keep the Infrared

ports facing each other and do not move them.

Infrared communication may not function properly in

areas of direct sunlight, directly under fluorescent

lights or near other equipment using infrared signals.

If either of the Infrared ports is dirty, infrared

communication will become difficult. Take care not to

scratch the ports, and wipe off any dirt with a soft cloth.

Insert a microSD Card in advance. However,

sending and receiving just single data may not

require the microSD Card.

When sending data, you can also operate from

each function (menu).

1In the home screen, [R]/[Send

and Receive by Infrared]

2Select an item

Receive: Receive single data.

Receive all: Receive all data.

Send: Select data and send.

Send all: Send all data by selecting an

application.

Send image and video settings: Set the

format of when sending images or videos.

:Perform the operation for receiving and

sending at the same time.

:After the operation for receiving, the handset

waits to receive data. Infrared

communication automatically begins when

data is sent from sender’s handset within

approximately 30 seconds.

Infrared communication

Using infrared communication

When using infrared communication

Approx. 20 cm

or less

Infrared port

15°

Sending and receiving by Infrared

105

File Management

You can send and receive data with other

handsets equipped with iC communication

function.

Make initial setting of Osaifu-Keitai in advance.

(nP. 136).

In the following cases, you cannot perform iC

communication.

During Offline(airplane) mode

During Osaifu-Keitai lock

In the following cases, data may not be sent via

iC communication.

During a call During charging

During earphone/microphone connection

During USB connection

Sp-mode mails, memos, schedules and ToruCa

cannot be sent by iC communication. For details

on other data that can be sent and received,

refer to “Infrared communication” (nP. 104).

Use while placing the a mark of receiver’s

handset on that of sender’s handset as shown.

Do not move the handset until sending and

receiving of data is completed.

There may be some cases in which data are

poorly sent and received or the screen is off by

positioning the handset near depending on the

other party’s handset. In that case, put a distance

between the a marks apart/closer or slide them

up/down or to the left/right.

To enter authentication code is required for sending

and receiving all data items. The authentication code

is a password exclusively for iC communication.

Before starting data communication, the sender and

receiver must enter the same user-specified

four-digit code. In addition, to enter Lock No. may be

required for sending all data items.

Note that if you select [Delete all before

registration] when receiving all data, all data

registered to the target function are deleted.

Receiving all data is not available depending on

the data type.

When you send 3D images, select [Contents

Manager] in the screen to select an application.

When available memory space in the save

destination becomes insufficient, the data being

received to that point are saved and receiving

ends.

IrSS™ communication performs

communication without confirming the response

of the receiver side, since it uses a simplex

communication. For this reason, the sender

side completes the communication normally

even if the receiver side does not.

iC communication

Using iC communication

When using iC communication

Sending and receiving by iC

mark

106 File Management

Insert a microSD Card in advance. However,

sending and receiving just single data may not

require the microSD Card.

Example: Still picture

1In the home screen, [R]/

[Contents Manager]

2Touch a still picture for a while/

[Share]/[Send by IC]

3Place the a mark on that of the

other party’s handset

4[Ok]

1Place the a mark on that of the

other party’s handset

2[Accept]

3Touch the status bar/select

received data

You can connect the handset to Bluetooth

devices wirelessly.

Wireless communications with all the Bluetooth

devices are not completely guaranteed.

Bluetooth function is not available in

Offline(airplane) mode.



Supported version

Bluetooth Specification Ver.3.0+EDR*1



Supported profiles*2 (Supported services)

HSP: Headset Profile*3

HFP: Hands Free Profile*4

A2DP: Advanced Audio Distribution Profile*5

AVRCP: Audio/Video Remote Control Profile*5

HID: Human Interface Device Profile*6

OPP: Object Push Profile*7

SPP: Serial Port Profile*8

PBAP: Phone Book Access Profile*9

*1 The handset and all Bluetooth function-installed

devices have ensured that they conform to the

Bluetooth specification according to the rules

that the Bluetooth SIG defines, and are all

authenticated. However, operating methods

might differ or data might not be exchanged

even when they are connected wirelessly,

depending on the features or specifications of

connecting devices.

*2 Standardizes the communication procedures of

Bluetooth device per feature of a device.

*3 Connect commercially available Bluetooth

compatible Headset to the handset to talk

wirelessly.

*4 Connect a commercially available Bluetooth

compatible hands-free device such as a car

navigation system to the handset to talk during

hands-free operation using the car navigation

system.

*5 Connect Wireless Earphone Set 02 (sold

separately) or commercially available Bluetooth

compatible audio device to the handset to play

music, sound of 1Seg, etc. wirelessly. Also,

remote control operation may be available from

Bluetooth devices. However, compatible

devices are limited depending on the data type.

Sending data

Receiving data

Bluetooth function

Supported version and supported

profiles

107

File Management

*6 Connect commercially available Bluetooth

compatible keyboard to Bluetooth devices to

enable you to enter characters with a keyboard.

*7 Connect a Bluetooth device to the handset with

the File transfer service to send and receive

data between them.

*8 Set the virtual connection with a serial cable

and interconnect between devices.

Transfer phonebook data in the handset to a

Bluetooth device. Data is not displayed correctly

on the other party’s device depending on the

contents of the transferred phonebook data.

Refer to the manual for the Bluetooth device as

well.

When connecting the Wireless Earphone Set

02, connect it from the handset.

You cannot listen to sounds regardless of data

type with Bluetooth devices which are not

compatible with SCMS-T.

Precautions for handling the Bluetooth

device

Note the following when using the Bluetooth device.

Note the following to make good connection.

Keep the distance between the handset

and another Bluetooth device within

approximately 10 m with no obstructions in

sight. The distance that can make

connection may be shorter when there are

obstructions between them or depending

on the conditions of the surroundings (such

as walls or furniture) and the structure of a

building. Especially when there is a wall or

floor of reinforced concrete between them,

they may be unable to connect with each

other. Note the above mentioned distance

is not guaranteed.

Move the handset and another Bluetooth

device as far away as possible from home

electric appliances, AV devices, OA

devices, etc. before connection. The

Bluetooth device is liable to be adversely

affected by a microwave oven, so move it

as far away as possible from the microwave

oven while using it. Otherwise, normal

connection cannot be performed when

electric devices are powered on or

Bluetooth devices may cause noises or

reception failure on a TV or radio set (TV

images may degrade for specific channels

of UHF or satellite broadcasting).

Move the Bluetooth device to a place that

connection is possible when there is a

broadcast station or radio near the

Bluetooth device, and the handset cannot

be connected to the device. Strong radio

waves may prevent connection between

Bluetooth devices.

Wireless connection is available with

Bluetooth device put in a bag or pocket.

However, lowering of communication speed

or noise may result when you are in

between the Bluetooth device and the

handset.

Electromagnetic signals from the Bluetooth

device may affect the operation of electronic

medical equipment. As some cases may

result in accident, turn off the handset and

other Bluetooth devices in the following place.

On trains On airplanes In hospitals

Nearby automatic doors or fire alarms

In places such as gas stations where

flammable gas is generated

108 File Management

Set after enabling Bluetooth function.

To register/connect a Bluetooth device, the

Bluetooth passkey may need to be entered.

Before starting the registration, decide the 1- to

16-digit number. Enter the same number on the

handset and the other party’s Bluetooth device.

1In the home screen, [R]/

[Settings]/[Wireless &

networks]/[Bluetooth settings]

2Select an item

Bluetooth: Enable Bluetooth function.

Device name: Change the handset’s name.

Discoverable: Set whether to receive a

search request from other Bluetooth devices.

Discoverable timeout: Set the time that can

receive a search request.

ƦEnable Discoverable in advance.

aptX: Set whether to use aptX™.

Detailed Bluetooth Settings: Set Bluetooth

function.

Scan for devices: Search for the Bluetooth

devices around the handset and register

them in it. Depending on Bluetooth device, it

may start connecting after completing

registration.

ƦSet the other party’s Bluetooth device to the

registration stand-by status in advance.

:Touch a paired Bluetooth device for a

while/[Options…] to change the connection

type.

The radio interference with Wi-Fi

compatible devices

The Bluetooth devices use the same

frequency band (2.4 GHz) as wireless LANs

(IEEE 802.11b/g/n). Therefore, using the

Bluetooth device near a wireless LAN device

may cause the radio interference, lowering of

communication speed, noise or connection

fail. In this case, turn off the wireless LAN

device or keep the handset and the Bluetooth

device at least approximately 10 m away from

the wireless LAN.

Bluetooth settings

If you fail to connect, connection may become

available after re-registration of Bluetooth

devices.

[Bluetooth]

When the Bluetooth function is enabled, the

handset is set to receive a registration request/

connection request from other Bluetooth

devices. Enable Discoverable in advance to

allow the handset to be searched for by other

Bluetooth devices.

While in connection stand-by, even if a

connection request from a Bluetooth device is

received, connection may not be made

depending on the signal strength etc.

[Discoverable]

Setting is disabled automatically when the

period of time set for Discoverable timeout

passed after enabling.

[Scan for devices]

For details on the operations of the other party’s

Bluetooth device, refer to the manuals of the

Bluetooth device to be used.

109

File Management

1Registration request/Connection

request from Bluetooth device

2[Pair]

:Entering the Bluetooth passkey may be

necessary depending on the other party’s

Bluetooth device.

:The request confirmation screen of Bluetooth

connection may be displayed.

1In the Bluetooth setting screen,

touch the Bluetooth device to

disable the registration for a

while/[Unpair]/[Disconnect &

unpair]

1In the Bluetooth setting screen,

select the Bluetooth device to

disable the connection/[OK]

Insert a microSD Card in advance. However,

sending just single data may not require the

microSD Card.

Example: Still picture

1In the home screen, [R]/

[Contents Manager]

2Touch a still picture for a while/

[Share]/[Bluetooth]

:Set the receiving Bluetooth device to receive

data.

3Select a Bluetooth device to

connect to

1Send data from the sender’s

Bluetooth device

2Touch the status bar/select data

to receive/[Accept]

3Touch the status bar/select data

to receive

When receiving registration request

from Bluetooth device or connection

request from unregistered Bluetooth

device

Disabling registration of Bluetooth

device

Disabling connection of Bluetooth

device

Sending and receiving by

Bluetooth

Sending data

Receiving data

Note that if you select [Delete all before

registration] at receiving all data, all data

registered to the target function are deleted.

Some data cannot be received all.

When available memory space in the save

destination becomes insufficient, the data being

received to that point are saved and receiving

ends.

110 File Management

1Insert the handset side connector

of the microUSB cable for PC

(sample) horizontally into the

external connector terminal on the

handset (1)

2Insert the PC side connector of the

microUSB cable for PC horizontally

into the USB connector on the PC

(2)

:For details on setting USB connection mode

nP. 82

Insert a microSD Card in advance.

1Connect the handset to a PC via the

microUSB cable for PC

2Touch the status bar/[USB

connected]

3[Turn on USB storage.]/[OK]

4Use as a microSD reader/writer

5Perform secure hardware removal

after use

6[Turn off USB storage.]

7Disconnect the microUSB cable for

PC from the handset

Transfer music data, videos, and still pictures

from a PC to a microSD Card.

Playing copyrighted data is only possible with the

handset used for transfer from a PC. Some data

may not be played due to copyright.

External connector device

Connecting the handset and

Use a USB cable “microUSB cable for PC”.

USB cables for PC are not available, since the

connector shape is different.

The use of a USB HUB may not work correctly.

Do not remove the microUSB cable for PC while

exchanging data with PC. Data may be damaged.

Keep side

with the

characters

microUSB cable for PC

Open external

connector

terminal cover

Windows XP, Windows Vista and Windows 7 all

of which are Japanese version are available OS

for the connection.

microSD reader/writer

While using as a microSD reader/writer,

Offline(airplane) mode is enabled.

While using as a microSD reader/writer,

microSD Card cannot be used by other

applications. In addition, microSD Card may not

be used as a microSD reader/writer while it is

used by other applications.

Transferring data

136 Applications

Osaifu-Keitai is a function which has built-in IC

card and allows you to pay, use as coupons or

collect stamps by simply holding the handset

over the scanning device at stores.

Moreover, you can access sites and web pages

by holding the handset over the scanning

device, and get the latest coupon, deposit

electronic money and check your usage by

using communication. In addition, for your

secure use, you can lock functions of

Osaifu-Keitai when you lost the handset.

For details on Osaifu-Keitai, refer to “

̮၌ဥ΄ͼ

ΡήΛ·

(sp

κȜΡ༎

)” (Mobile Phone User’s

Guide [sp-mode]) (in Japanese only).

ɦTo use Osaifu-Keitai compatible service, settings

are necessary on a website or an application.

The handset malfunctions may cause data

(including electronic money, points, etc.) saved

in the IC card to be lost or changed (Note that as

a rule, you will be asked to delete data when

leaving your handset for repairs, etc., since we

cannot keep your handset with such data still

remaining in it). For the service such as a

reissue, restoration, temporary keeping or

transfer of the data, contact your provider of

Osaifu-Keitai compatible service. Be sure to use

the Osaifu-Keitai compatible service including a

backup service for important data.

DOCOMO shall not be liable for any loss or

change of data in the IC card or other damages

of Osaifu-Keitai service caused by any reason

such as malfunctions and upgrading.

When the handset is stolen or lost, immediately

contact your provider of Osaifu-Keitai compatible

service for handling methods.

iC transfer service is a service that enables you

to move the data saved in the IC card to new

Osaifu-Keitai from the old one when changing

Osaifu-Keitai such as by changing models or

repairing the handset.

iC transfer service is available at a docomo

Shop near you.

For details on iC transfer service, refer to “

̮၌

ဥ΄ͼΡήΛ·

(sp

κȜΡ༎

)” (Mobile Phone

User’s Guide [sp-mode]) (in Japanese only).

To use Osaifu-Keitai compatible services,

download the Osaifu-Keitai compatible

application from Osaifu-Keitai compatible sites

and make the setting. Some services do not

need to download the Osaifu-Keitai compatible

application.

1In the home screen, [R]/

[Osaifu-Keitai]

:If the initial setting is not completed, the initial

setting screen appears.

2Select a service

Osaifu-Keitai iC transfer service

Using Osaifu-Keitai

You cannot use Osaifu-Keitai in the following

situations. However, you can pay by holding the

handset over a scanning device.

In Offline(airplane) mode

When you are charging the handset,

connecting a microUSB cable for PC

(sample) to it or connecting an earphone/

microphone to it while the docomo mini UIM

card is not inserted/When the handset has

never received radio wave

137

Applications

Hold the a mark of the handset over the

scanning device to use as electronic money or

railway tickets, to retrieve ToruCa, etc.

Pay attention to the following points when

holding the a mark over the scanning device.

Do not contact between the handset and the

scanning device

Hold the a mark directly above the scanning

device

Slowly hold the a mark over the center of the

scanning device

If the scanning device does not recognize the

built-in IC card, hold the a mark over the

scanning device and move the handset

around

Do not attach a metallic substance on the a

mark side

1Hold the a mark over the

scanning device

2Confirm that the data is scanned

Lock the function of Osaifu-Keitai.

Perform the same operation to disable the lock.

1In the service list screen, z/

[Osaifu-Keitai Lock Setting]/[Next]

2Enter the Lock No./[OK]/[OK]

ToruCa is an electronic card that can be

imported to the handset. You can retrieve it as

store information or a coupon from a scanning

device or sites. Retrieved ToruCa is saved in

the “ToruCa” application and you can display/

search/update it using the application.

For details on ToruCa, refer to “

̮၌ဥ΄ͼΡ

ήΛ·

(sp

κȜΡ༎

)” (Mobile Phone User’s

Guide [sp-mode]) (in Japanese only).

1In the home screen, [R]/[ToruCa]

Holding over scanning device

mark

Osaifu-Keitai lock setting

ToruCa

Packet communication charges may be

incurred for retrieving, displaying or updating

ToruCa.

ToruCa provided for i-mode terminals may not

be retrieved/displayed/updated.

The following functions may not be used

depending on the settings of IP (Information

Provider).

Retrieving from a scanning device

Updating

Sharing ToruCa

Moving or copying to a microSD Card

Displaying a map

145

International Roaming

Check followings in Japan before using the handset

overseas.

Subscription

Check the status of a subscription for WORLD

WING. For details, contact “General Inquiries” on

the back of this manual.

Charging battery

Use FOMA AC Adapter 01 for Global use (sold

separately) or FOMA AC Adapter 02 (sold

separately) as an AC adapter for charging while

traveling overseas.

Charge

Overseas charges (call charges, packet

communication charges) differ from those in

Japan.

Since some applications automatically perform

packet communication, the packet

communication charges may be higher. Contact

the application provider for the operation of each

application.

Network service settings

If you subscribed to network services, network

services such as Voice Mail Service and Call

Forwarding Service are available from overseas.

However, some network services are not available.

To use network services overseas, setting

Remote operations to “Activate” is required.

Remote operations can be set in your country of

stay.

Some network services that can be set/disabled

etc. may not be available depending on overseas

telecommunications carriers.

The handset automatically connects to the

available telecommunications carrier when you turn

the power on in your country of stay.

Connection

When telecommunications carriers (nP. 147) is

set to [Select automatically], the suitable network is

automatically selected.

Overseas packet communication charges are

available with a fixed amount of charges as an

upper limit per day by connecting to a compatible

operator for telecommunications carriers manually.

To use this service, subscription to flat-rate packet

communication services is required. For details,

refer to “Mobile Phone User’s Guide [International

Services]” or the DOCOMO International Services

website.

Viewing the display

The type of network in use appears in the status

bar.

ƦWhile international roaming, [R] appears on

the upper left of the signal icon.

Connected operator can be checked in the status

panel.

Before use overseas

Check before departure

Set before departure

Check in your country of stay

3/0: During 3G communication/3G available

S/P: During GSM communication/GSM

available

146 International Roaming

Date & time

If [Automatic] of Date & time is enabled, the

handset receives information with time and time

differences from overseas telecommunications

carrier, then time and time differences are

corrected.

Time and time differences may not be adjusted

correctly depending on overseas

telecommunications carrier. In such a case, set

time zone manually.

The correction timing differs depending on the

telecommunications carrier.

For details on Date & time nP. 89

Inquiries

When the handset or the docomo mini UIM card

is lost or stolen overseas, promptly contact

DOCOMO and conduct a procedure for

canceling the use of service from your country of

stay. Refer to the back of this manual for

inquiries. Note that communication/calling

charges after the handset or the docomo mini

UIM card is lost or stolen are incurred to the

subscriber.

For land-line phone, etc., “International call

access number” of your country of stay or

“Universal number international prefix” is

required.

The handset automatically connects to the

DOCOMO network after homecoming. If it fails,

perform the following setting.

Set Network Mode to [3G/GSM(Auto)]

(nP. 147).

Set telecommunications carriers to [Select

automatically] (nP. 147).

At the time of purchase, the handset is set to

automatically search for and switch to available

networks. When you want to manually switch

networks, set by performing following

operations.

1In the home screen, [R]/

[Settings]/[Wireless &

networks]/[Mobile networks]

2Select an item

Data enabled: Enable data communication.

Data roaming: For details on Data roaming

nP. 146

Network Mode: For details on Network Mode

nP. 147

Access Point Names: Set an access point.

Network operators: For details on Network

operators nP. 147

Set whether to use data communication when

roaming.

1In the home screen, [R]/

[Settings]/[Wireless &

networks]/[Mobile networks]/

[Data roaming]

Check after homecoming

Settings to use overseas

Data roaming

147

International Roaming

Set a network to use.

1In the home screen, [R]/

[Settings]/[Wireless &

networks]/[Mobile networks]/

[Network Mode]

2Select an item

3G/GSM(Auto): Switch to an available

network automatically.

3G: Use 3G network.

GSM: Use GSM/GPRS network.

Search for networks and set a network operator

to use.

1In the home screen, [R]/

[Settings]/[Wireless &

networks]/[Mobile networks]/

[Network operators]

:Search for networks and a list of network

operators is displayed.

2Select a network operator

:To search for network operators again:

[Search networks]

:To select a network operator automatically:

[Select automatically]

1In the home screen, [R]/

[Phone]/[Dial]

2“+” (touch “0” for a while)/enter

country code, area code (city code)

and the other party’s phone

number/[0]

:Alternatively, enter a phone number/

z/[International call]/select a country

code to enter a country code.

ƦThe first “0” of the area code (city code) will

be omitted.

:When the area code (city code) begins with

“0”, omit the “0” when dialing (Include the “0”

when making a call to some countries or

regions such as Italy).

Network mode

Network operators

When networks are not searched, disable [Data

enabled] (nP. 146).

If you manually set network operators

overseas, set to [Select automatically] after

returning to Japan.

Making/Receiving a call

in your country of stay

Making a call outside your

country of stay (including Japan)

Even if you notify the caller ID, [Unknown] or [ID

Unsent] appears depending on the

telecommunications carrier, and the caller ID

may not be displayed correctly.

148 International Roaming

When you make a call to other countries from

your country of stay, you can make an

international call with simple operation using

International dial assist.

Set International dial assist in advance.

The first “0” of a phone number will be converted

to the country code you set in Country code

automatically.

1In the home screen, [R]/

[Phone]/[Dial]

2Enter a phone number/[0]

3[Converted number]

1In the home screen, [R]/

[Settings]/[Call settings]/

[Overseas setting]/[International

dial assist]

2Select an item

Automatic conversion function: Set whether

to make calls using International dial assist.

Country code: Set country code to use when

using International dial assist.

International prefix: Set international prefix to

use when using International dial assist.

You can make a domestic call in your country of

stay in the same way as you do in Japan.

Always dial the area code (city code), even when

the number is in the same area.

When you make a call to a “WORLD WING”

subscriber overseas, the call is made as an

international call to Japan regardless of your

country of stay.

1In the home screen, [R]/

[Phone]/[Dial]

2“+” (touch “0” for a while)/enter

country code “81” (Japan), the

other party’s mobile phone number

excluding the first “0”/[0]

You can receive a call overseas in the same way

as you do in Japan.

When having calls made to your handset from

Japan, have your phone number dialed just as a

domestic call in Japan.

When having calls made to your handset from

countries other than Japan, have the international

call access number and “81” (Japan) added to the

beginning of your phone number with the first “0”

excluded as an international call to Japan

regardless of your country of stay.

International call access number of the country of

the caller-81-90 (or 80)-XXXX-XXXX

Making a call using

International dial assist

Setting of International dial assist

Making a call in your country of

stay

Making a call to a WORLD

WING subscriber overseas

Receiving a call

When a call is received during international

roaming, the call is forwarded from Japan. Call

charges to Japan are incurred by the caller and

receiving charges by the receiver.

Having calls to your handset

168 Appendix/Index

This model SH-01D mobile phone complies with

Japanese technical regulations and

international guidelines regarding exposure to

radio waves.

This mobile phone was designed in observance of

Japanese technical regulations regarding exposure

to radio waves (*1) and limits to exposure to radio

waves recommended by a set of equivalent

international guidelines. This set of international

guidelines was set out by the International

Commission on Non-Ionizing Radiation Protection

(ICNIRP), which is in collaboration with the World

Health Organization (WHO), and the permissible

limits include a substantial safety margin designed

to assure the safety of all persons, regardless of

age and health condition.

The technical regulations and international

guidelines set out limits for radio waves as the

Specific Absorption Rate, or SAR, which is the

value of absorbed energy in any 10 grams of tissue

over a 6-minute period. The SAR limit for mobile

phones is 2.0 W/kŨ. The highest SAR value for this

mobile phone when tested for use at the ear is

0.553 W/kŨ. There may be slight differences

between the SAR levels for each product, but they

all satisfy the limit.

The actual SAR of this mobile phone while

operating can be well below that indicated above.

This is due to automatic changes to the power level

of the device to ensure it only uses the minimum

required to reach the network. Therefore in general,

the closer you are to a base station, the lower the

power output of the device.

This mobile phone can be used in positions other

than against your ear. This mobile phone satisfies

the international guidelines when used with a

carrying case or a wearable accessory approved by

NTT DOCOMO, INC. (*2). In case you are not

using the approved accessory, please use a

product that does not contain any metals, and one

that positions the mobile phone at least 1.5 cm

away from your body.

The World Health Organization has stated that “a

large number of studies have been performed over

the last two decades to assess whether mobile

phones pose a potential health risk. To date, no

adverse health effects have been established as

being caused by mobile phone use.”

Please refer to the WHO website if you would like

more detailed information.

(http://www.who.int/docstore/peh-emf/publications/

facts_press/fact_english.htm)

Please refer to the websites listed below if you

would like more detailed information regarding

SAR.

Specific Absorption Rate

(SAR) of Mobile Phone

Ministry of Internal Affairs and Communications

Website:

(http://www.tele.soumu.go.jp/e/sys/ele/index.htm)

Association of Radio Industries and Businesses

Website:

(http://www.arib-emf.org/index02.html) (in Japanese

only)

NTT DOCOMO, INC. Website:

(http://www.nttdocomo.co.jp/english/product/sar/)

SHARP Corporation Website:

(http://www.sharp.co.jp/products/menu/phone/

cellular/sar/index.html) (in Japanese only)

169

Appendix/Index

*1 Technical regulations are defined by the

Ministerial Ordinance Related to Radio Law

(Article 14-2 of Radio Equipment Regulations).

*2 Regarding the method of measuring SAR when

using mobile phones in positions other than

against the ear, international standards

(IEC62209-2) were set in March of 2010. On

the other hand, technical regulation is currently

being deliberated on by national council (As of

November, 2011).

European RF Exposure Information

Your mobile device is a radio transmitter and

receiver. It is designed not to exceed the limits for

exposure to radio waves recommended by

international guidelines. These guidelines were

developed by the independent scientific

organization ICNIRP and include safety margins

designed to assure the protection of all persons,

regardless of age and health.

The guidelines use a unit of measurement known

as the Specific Absorption Rate, or SAR. The SAR

limit for mobile devices is 2 W/kŨ and the highest

SAR value for this device when tested at the ear

was 0.542 W/kŨ*.

As SAR is measured utilizing the devices highest

transmitting power the actual SAR of this device

while operating is typically below that indicated

above. This is due to automatic changes to the

power level of the device to ensure it only uses the

minimum level required to reach the network.

The World Health Organization has stated that

present scientific information does not indicate the

need for any special precautions for the use of

mobile devices. They note that if you want to

reduce your exposure then you can do so by

limiting the length of calls or using a hands-free

device to keep the mobile phone away from the

head.

* The tests are carried out in accordance with

international guidelines for testing.

Declaration of Conformity

In some countries/regions, such as France, there are

restrictions on the use of Wi-Fi. If you intend to use Wi-Fi

on the handset abroad, check the local laws and

regulations beforehand.

Hereby, Sharp Telecommunications of Europe Ltd,

declares that this SH-01D is in compliance with the

essential requirements and other relevant provisions

of Directive 1999/5/EC.

A copy of the original declaration of conformity can be

found at the following Internet address:

(http://www.sharp.co.jp/k-tai/) (in Japanese only)

FCC Notice

This device complies with part 15 of the FCC

Rules.

Operation is subject to the following two

conditions:

(1) This device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation.

170 Appendix/Index

Changes or modifications not expressly

approved by the manufacturer responsible for

compliance could void the user’s authority to

operate the equipment.

Information to User

This equipment has been tested and found to

comply with the limits of a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses and

can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference

will not occur in a particular installation; if this

equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is

encouraged to try to correct the interference by one

or more of the following measures:

1. Reorient/relocate the receiving antenna.

2. Increase the separation between the equipment

and receiver.

3. Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

4. Consult the dealer or an experienced radio/TV

technician for help.

FCC RF Exposure Information

Your handset is a radio transmitter and receiver.

It is designed and manufactured not to exceed the

emission limits for exposure to radio frequency (RF)

energy set by the Federal Communications

Commission of the U.S. Government.

The guidelines are based on standards that were

developed by independent scientific organizations

through periodic and thorough evaluation of

scientific studies. The standards include a

substantial safety margin designed to assure the

safety of all persons, regardless of age and health.

The exposure standard for wireless handsets

employs a unit of measurement known as the

Specific Absorption Rate, or SAR. The SAR limit

set by the FCC is 1.6 W/kŨ.

The tests are performed in positions and locations

(e.g., at the ear and worn on the body) as required

by the FCC for each model. The highest SAR value

for this model handset when tested for use at the

ear is 0.616 W/kŨ and when worn on the body, as

described in this user guide, is 0.720 W/kŨ.

Body-worn Operation; This device was tested for

typical body-worn operations with the back of the

handset kept 1.0 cm from the body. To maintain

compliance with FCC RF exposure requirements,

use accessories that maintain a 1.0 cm separation

distance between the user’s body and the back of

the handset. The use of beltclips, holsters and

similar accessories should not contain metallic

components in its assembly.

171

Appendix/Index

The Japan Export Administration Regulations

(“Foreign Exchange and International Trade

Law” and its related laws) will be applied to this

product and its accessories under certain

conditions. The Export Administration

Regulations are also applied. To export or

reexport the handset and its accessories,

conduct all legally required procedures at your

own risk and expense. For details on the

procedures, contact the Ministry of Economy,

Trade and Industry or the US Department of

Commerce.

Data with third party copyrights such as text,

images, music and software that is downloaded

via Internet web pages, acquired by TV, video,

etc. or shot by the handset cannot be duplicated,

altered or publicly transmitted without rightful

party’s consent. Only duplicating, quoting, etc.

for personal use is permitted under copyright

laws.

Even if for personal use, filming and recording

may be prohibited for demonstrations,

performances and exhibitions.

Also, shooting another’s image or posting

another’s image on Internet web pages without

their consent may constitute a violation of one’s

right to their image.

“FOMA”, “ToruCa”, “mopera”, “mopera U”,

“Deco-mail”, “i-appli”, “i-mode”, “iD”, “WORLD

WING”, “WORLD CALL”, “sp-mode”, the “iD”

logo are trademarks or registered trademarks of

NTT DOCOMO, INC.

“Catch Phone (Call waiting service)” is a

registered trademark of Nippon Telegraph and

Telephone Corporation.

“Multitask” is a registered trademark of NEC

Corporation.

The use of accessories that do not satisfy these

requirements may not comply with FCC RF

exposure requirements, and should be avoided.

The FCC has granted an Equipment Authorization

for this model handset with all reported SAR levels

evaluated as in compliance with the FCC RF

emission guidelines. SAR information on this model

handset is on file with the FCC and can be found

under the Display Grant section of (http://

www.fcc.gov/oet/ea/fccid/) after searching on FCC

ID APYHRO00159.

Additional information on Specific Absorption Rates

(SAR) can be found on the Cellular

Telecommunications & Internet Association (CTIA)

Website at (http://www.ctia.org/) .

Export Administration

Regulations

Intellectual Property Right

Copyrights and rights of

portrait

Registered trademarks and

trademarks

175

Appendix/Index

The abbreviations of operating systems

(Japanese versions) below are used in this

manual.

Windows 7 stands for Microsoft® Windows® 7

(Starter, Home Basic, Home Premium,

Professional, Enterprise and Ultimate).

Windows Vista stands for Windows Vista®

(Home Basic, Home Premium, Business,

Enterprise and Ultimate).

Windows XP indicates the Microsoft®

Windows® XP Professional operating system

or Microsoft® Windows® XP Home Edition

operating system.

The Bluetooth word mark and logos are owned

by the Bluetooth SIG, INC. and any use of such

marks by NTT DOCOMO, INC. is under license.

Other trademarks and trade names are those of

their respective owners.

Google, Google logo, Android, Android Market,

Gmail, Google Maps, Google Talk, Google Maps

Navigation, Google Latitude, Google Places,

Google Voice Search, YouTube, and YouTube

logo are trademarks or registered trademarks of

Google Inc.

Mercury 3D is a generic name of 3D conversion

technology of Mercury System Co.,Ltd. The

authorization by Mercury System Co.,Ltd.

(Mercury@Mercury3d.co.jp) is required to

convert still image received from other media

(except still pictures taken by the handset) to

1920 × 1080 pixels or bigger 3D image for

commercial use.

Eco Backlight Control uses Assertive Display

technology by Apical Limited.

This product contains Audio Enhancement

technology by AM3D.

Sharp HRO00165 Cellular Phone User Manual operationa manuatl

Sharp Corporation Cellular Phone operationa manuatl

Contents

operationa manuatl

Navigation menu

Namespaces

Views

Navigation