Sharp HRO00173 Cellular Phone User Manual 12 SH 10D Draft Operation Manual
Sharp Corporation Cellular Phone 12 SH 10D Draft Operation Manual
UserManual.wiki
>
Sharp
>
HRO00173 User Manual
>
operational manual
Contents
1.
operational manual
2.
Manual
3.
Users Manual
operational manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![37Before Using the Handset[Read the user’s guides of FOMA AC Adapter 01/02 (sold separately), FOMA DC Adapter 01/02 (sold separately), AC Adapter 03 (sold separately), DC Adapter 03 (sold separately) and FOMA Charger microUSB Adapter SH01/FOMA charging microUSB adapter T01 (sold separately)] Following operations describe how to charge with AC Adapter 03 or DC Adapter 03.1Open the external connector terminal cover of the handset and insert the microUSB plug of a microUSB cable/DC adapter horizontally into the external connector terminal with the USB mark side turned down:Check the direction (front or rear) of the microUSB plug and insert it horizontally.2Insert the USB plug of the microUSB cable horizontally into the USB connector of an AC adapter with the USB mark side facing you (1):Check the direction (front or rear) of the USB plug of the microUSB cable and insert it horizontally into the AC adapter. When noises interfere on a TV, radio set, etc. during its use, use the wireless charger after distancing it as far away from a TV, radio set, etc. as possible. When charging, keep the wireless charger at least 30 cm away from wireless charging compatible devices other than the handset/battery pack to charge. Otherwise the handset/battery pack to charge may not be detected and thus may not be charged. The quality of calls or reception status of 1Seg etc. may deteriorate while the handset is being charged. Do not move the wireless charger and the handset/battery pack while charging. Do not let the vibrator activated while charging the handset. Note that charging may not be complete or the handset may fall since it moves due to vibrations. If you charge the handset with a commercially available product with b mark, the handset may not receive calls during charging. Charge with accompanying Wireless Charger SH02.Charging with AC adapter/DC adaptermicroUSB plugKeep side with theUSB mark downExternal connector terminalChargingillumination](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-16.png)
![39Before Using the HandsetWhen the handset is turned on, you can charge the handset by connecting the handset to a PC with Micro USB Cable 01 (sold separately). Install the USB driver to the PC in advance. If the USB driver has not been installed on the PC, you cannot charge the battery by connecting the handset to the PC via Fast transfer mode.ƦFor details on installing USB driver, refer to “Manual for USB Driver Installation” in PDF format in the following site.(http://k-tai.sharp.co.jp/support/d/sh-09d/ (in Japanese only) For details on connecting to a PC nP. 1121H (for at least 2 seconds):When you turn the power on for the first time, the initial setting screen is displayed. Each setting item can also be set from menus (nP. 43).:If the initial setting screen for docomo service is displayed, operate by following the instructions on the screen.1H (for at least 1 second)/[Power off]/[OK]The screen is off and the sleep mode is activated when H is pressed or the handset is not in use for a set length of time.Press H in the sleep mode to deactivate the sleep mode.When the power is turned on or the sleep mode is deactivated, the touch panel is locked.Touch [J] to unlock.Operations in touch panel unlock screen To set/disable the manner mode: y (for at least 1 second) To turn on the mobile light: x (for at least 1 second)ƦPress any of the keys or touch [J] to turn it off. To activate the camera: [K]Charging with Micro USB Cable 01Turning power ON/OFFTurning power ONTurning power OFFSleep modeTouch panel lock The mobile light will automatically turn off approximately 30 seconds after it turns on. The status panel is displayed when Screen lock is set to [Slide or Touch].](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-18.png)
![41Before Using the HandsetFlick your finger to the left/right in the home screen etc. to switch pages.1Move your finger like sweeping the touch panelPinch out/Pinch in while displaying an image etc. to zoom in/out.1Put two fingers on the touch panel and slide them with putting a distance between two fingers apart (pinch out)/closer (pinch in)Use the navigation keys displayed at the bottom of the screen to perform the basic operations.1{: Back key Returns to the previous screen.2|: Home key Displays the main page of the home screen.3z: Menu key Displays available functions (menus).4}: Recent Apps key Displays the history of recently used applications.When you touch [z] or touch the screen for a while, functions (menus) available in that screen appear.Example: Home screenFlickPinch out/Pinch inOperation while using functionNavigation keysRetrieving menuSet item list](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-20.png)
![45Before Using the Handsetmopera U is an ISP owned by NTT DOCOMO. If you subscribe to mopera U, you can use Internet with simple setting. mopera U is a paid service that requires subscription. 1In the home screen, [R]/[Settings]/[Network settings]/[Mobile networks]/[Access Point Names]/[mopera U]/[mopera U ୭] (mopera U settings)If you use Wi-Fi function of the handset, you can use mail or Internet by connecting to your home, corporate network or access points of public wireless LAN service. Packet communication is also available while Wi-Fi function is enabled. Wi-Fi connection is prioritized while Wi-Fi connection is set, but the connection will be automatically switched to that of LTE/3G/GPRS network once Wi-Fi connection is terminated. Note that packet communication charges will be incurred in such cases. Refer to the manual of your wireless LAN base unit when using the access point at home etc. Operate access point registration near the access point.1In the home screen, [R]/[Settings]/[Wi-Fi]2Slide [OFF] to the right3Select an access point/[Connect]mopera USetting mopera U mopera U ୭ (mopera U settings) is an access point for mopera U settings. When you use the access point for mopera U settings, packet communication charges are not incurred. Note that you can connect to only the initial setting screen or the change setting screen. For details on mopera U settings, refer to the mopera U website.Wi-Fi settingsThe radio interference with Bluetooth devices Wireless LANs (IEEE 802.11b/g/n) use the same frequency band (2.4 GHz) as Bluetooth devices. Therefore, using the wireless LAN device near a Bluetooth device may cause radio interference, lowering of communication speed, noise or connection failure. In this case, turn off the Bluetooth device or keep the handset and the wireless LAN device at least approximately 10 m away from the Bluetooth device.](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-21.png)
![46 Before Using the Handset:If you select an access point not protected by security, it is automatically connected.:If you select an access point protected by security, enter the password (security key).:WPS compatible access points can be easily registered. Select an item in Setup and register an access point.:To register access points manually: [ADD NETWORK]/enter the network SSID/set security/[Save]:Alternatively, select [AOSS] to connect to an access point. Follow the instructions on the screen and operate after this step.1In the home screen, [R]/[Settings]/[Wi-Fi]/[z]/[Advanced]2Select an itemNetwork notification: Set whether to display a notification icon when an open network is detected.ƦEnable the Wi-Fi function before setting it.Wi-Fi sleep policy: Set when to switch the Wi-Fi function to the sleep mode.MAC address: Confirm the MAC address.IP address: Confirm the IP address.1In the home screen, [R]/[Settings]/[Wi-Fi]2Select the connected access point/[Forget]:Disconnect with the password retained.Tethering function that connects Wi-Fi compatible devices to the Internet by using the handset as a Wi-Fi access point is available. You can connect to up to five Wi-Fi compatible devices simultaneously.1In the home screen, [R]/[Settings]/[Network settings]/[Tethering]2Select an itemWi-Fi tethering: Enable the Wi-Fi tethering.ƦCheck the details of the precautions before use.Configure Wi-Fi hotspot: Set the Wi-Fi tethering settings such as network SSID and security.Help: Display Help information. When you select an access point and connect to it with a wrong password (security key), [Avoided poor Internet connection] or [Connected (Limited)] is displayed. Confirm the password (security key). When [Avoided poor Internet connection] or [Connected (Limited)] is displayed after entering the correct password (security key), you may not have acquired the correct IP address. Connect to the access point again after confirming signal status. The registration process using WPS takes a few minutes. After completion of the registration of the access point, check that the proper connection to the access point is acquired. As for the manual registration of an access point, this function supports WEP, WPA/WPA2 PSK, 802.1xEAP as the security setting.Detailed settingsDisconnectingWi-Fi tethering](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-22.png)
![47Before Using the Handset1In the home screen, [R]/[Email]:Only when an account is not set, the account setting screen appears.2Enter mail address and password/[Next]:Provider information is preset for some mail accounts, and a receiving mail server and a sending mail server are automatically set.:When you use an account whose provider information is not preset, it is necessary to set a receiving mail server and a sending mail server manually. For details on those settings, contact the Internet service provider you use.3Set an account/[Next]4Enter an account name and your name/[Next]1In the home screen, [R]/[Settings]/[Accounts & sync]/[ADD ACCOUNT]2Select the account type3Set up an account1In the home screen, [R]/[Settings]/[Accounts & sync]2Select an account/[z]/[Remove account]/[Remove account]If you forget your Google account password, retrieve it.1In the home screen, [R]/[Browser]2Enter “(http://www.google.com/) ” in the URL entry field/[Go]/[more]/[Sign In]/[Can’t access your account?]/follow the instructions on the screen[Configure Wi-Fi hotspot] At the time of purchase, Network SSID is set to [SH-D_AP] and Security is set to [WPA2 PSK] while Password is set randomly. Change the settings if necessary.Setting up mail account The account which is registered first is automatically given priority to normal use. When registering multiple accounts, you can set an account as prioritized one by enabling [Send email from this account by default.] at the time of the registration. When the account type is Exchange, entering “¥UsernameDomain” in the “Domain¥Username” area is required to set a receiving mail server manually depending on the provider to use. Contact the administrator of the server for details.Setting up Google account etc. When activating the application that requires an account without setting the account, the account setup screen appears. Keep a separate memo of the set account and password.Deleting your accountRetrieving your Google account password](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-23.png)
![68 Call1In the home screen, [R]/[Phone]/[Dial]2Enter a phone number:Always enter the city code, even when it is a local number.:You can set to notify/not to notify the other party of your phone number for each call by adding “186”/“184” to the head of the phone number.1Call Make a call. Also, if there is an outgoing call history, touch to enter the latest outgoing call history when the phone number has not been entered.2Delete Delete an entered number.3Outgoing/Incoming call history4Favorites Display the contacts set to [Favorites] by groups.5Dial Display the dial screen.6Add to phonebook7Koe-no-Takuhaibin For details of Koe-no-Takuhaibin, refer to the DOCOMO website.8Phonebook Display the phonebook.3[0]4[End] to end the call1In the home screen, [R]/[Phone]/[Dial]2Enter a phone number/[z]/[Add wait]3Enter a number to send/[0]4[Yes] during the callCallMaking a callEntering touch-tone signalsEmergency callEmergency calls Phone numberPolice 110Fire and ambulance 119Marine emergency 118](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-24.png)
![69CallWORLD CALL is an international calling service available from DOCOMO handset in Japan.WORLD CALL is registered when FOMA services are registered (excluding users who did not apply for WORLD CALL). You can call to approximately 240 countries and regions worldwide. Calling to a land-line phone and mobile phone overseas is available. For information on available countries and network operators, refer to “Mobile Phone User’s Guide [International Services]” or the DOCOMO International Services website. Commission and monthly usage fees are free. Contact “General Inquiries” on the back of this manual for details on WORLD CALL. To make an international call through a company other than DOCOMO, contact the respective companies for instructions. The caller ID may not be notified or displayed correctly depending on overseas network operators. In this case, making a call with incoming call history is not available. The handset supports “Location notification of emergency call”.When dialing an emergency number such as 110, 119, and 118, the information of your location (location information) is automatically notified to the agency that received the emergency call (e.g. the police station). Depending on your location and the reception status of the signal, the agency that received the emergency call may not be able to confirm the exact location.If you are not sending your caller ID by calling with “184” added or other means, your location information and phone number are not notified. However, if the agency that received the emergency call considers your location information and phone number necessary for important purposes, such as life saving, the agency can retrieve them regardless of your settings.In addition, the area/timing to introduce “Location notification of emergency call” depends on the state of preparation in each agency that receives emergency calls. In Japan, you cannot make a call to the emergency number (110, 119 or 118) when a docomo mini UIM card is not inserted, from the PIN code entry screen, while the PIN code is locked or from the PUK (PIN Unlock Key) entry screen. When calling 110, 119, and 118 from your handset, the police or fire stations may return your call for verification purposes. State that you are calling from a mobile phone, and give your phone number and exact present location.Remain stationary to ensure that the call is not disconnected while you are on the line, and keep the handset turned on to receive calls for approximately 10 minutes afterwards. Depending on the region, calls to the police or fire station of the local area may not be made.International call (WORLD CALL)](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-25.png)
![70 Call1When a call is received, the ring tone sounds and the incoming illumination flashes:If you press x/y during an incoming call, you can stop the ring tone, vibrator or flash of the incoming illumination.2Receive the call:Operate after touching [Activate].1Reject You can reject the incoming call.2Accept You can receive the call.3[End] to end the call1When a call is received, the ring tone sounds and the incoming illumination flashes2[z]/[Quick responses]3Select a response1When a call is received, the ring tone sounds and the incoming illumination flashes2[z]/[On hold]1When a call is received, the ring tone sounds and the incoming illumination flashes2[z]/[Absence Memo]Playing an answering memo1In the home screen, [R]/[Settings]/[Call]2[Call/Ans Memo]/[Answering Memo List]/select an answering memoYou can receive a call with Stereo Headset with Microphone (sample).[Calling Method] When calling to a land-line phone: 010/country code/area code (city code)/the other party’s phone number/[0] When calling to a mobile phone: 010/country code/the other party’s phone number/[0]ƦFor the other parties’ phone numbers and area codes (city codes) that begin with “0”, omit the “0” when entering (except some countries or regions such as Italy).ƦAlternatively, enter “009130-010” as usual or “+” instead of “010”.Receiving a callIncomingilluminationQuick responsesPlacing a call on holdAnswering by answering memoAnswering with Stereo Headset with Microphonecoming illumination.ceive the callperate after touching [Activate].](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-26.png)
![105File ManagementUse infrared communication to send and receive data to and from other handsets which also support infrared communication. Send and receive phonebooks, sp-mode mails, profiles, business cards, memos, schedules, bookmarks, ToruCa, data shot by camera, data in Gallery, data recorded with the voice recorder, etc. The handset infrared communication function complies with IrMC™ 1.1 standard. However, depending on the data, some data may not be sent or received even when the other party’s handset complies with IrMC™ 1.1 standard. To enter docomo application password or passcode and to enter authentication code are required for sending and receiving all data items. The authentication code is a password exclusive to infrared communication. Before starting data communication, the sender and receiver must enter the same user-specified four-digit code. Face the infrared ports of the receiver’s and sender’s handsets with each other and set the distance between them to approximately 20 cm or less as shown. While doing infrared communication, keep the infrared ports facing each other and do not move them. Infrared communication may not function properly in areas of direct sunlight, directly under fluorescent lights or near other equipment using infrared signals. If either of the infrared ports is dirty, infrared communication will become difficult. Take care not to scratch the ports, and wipe off any dirt with a soft cloth. When sending data, you can also operate from each function (menu).1In the home screen, [R]/[Send/receive by infrared]2Select an itemSingle: Receive single data.Multiple: Receive all data.Single: Select data and send.Multiple: Send all data by selecting an application.:Perform the operation for receiving and sending at the same time.:After the operation for receiving, the handset waits to receive data. Infrared communication automatically begins when data is sent from sender’s handset within approximately 30 seconds.Infrared communicationUsing infrared communicationWhen using infrared communicationApprox. 20 cmor lessInfrared port15°15°Sending and receiving by infrared Note that if you select [Delete all before registration] when receiving all data, all data registered to the target function are deleted.](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-27.png)
![107File ManagementExample: Still picture1In the home screen, [R]/[SH tool]/[Recommendation]/[Contents manager]2Touch a still picture for a while/[Share]/[Send by IC]3[Ok]4Place the a mark on that of the other party’s handset1Place the a mark on that of the other party’s handset2[Accept]3Drag the status bar down/select received dataYou can connect the handset to Bluetooth devices wirelessly. Wireless communications with all the Bluetooth devices are not completely guaranteed.Supported versionBluetooth Specification Ver.3.0+EDR*1Supported profiles*2 (Supported services)HSP: Headset Profile*3HFP: Hands Free Profile*4A2DP: Advanced Audio Distribution Profile*5AVRCP: Audio/Video Remote Control Profile*5HID: Human Interface Device Profile*6OPP: Object Push Profile*7SPP: Serial Port Profile*8PBAP: Phone Book Access Profile*9PAN: Personal Area Networking Profile*10HDP: Health Device Profile*11*1 The handset and all Bluetooth function-installed devices have ensured that they conform to the Bluetooth specification according to the rules that the Bluetooth SIG defines, and are all authenticated. However, operating methods might differ or data might not be exchanged even when they are connected wirelessly, depending on the features or specifications of connected devices.*2 Standardizes the communication procedures of Bluetooth device per feature of a device.*3 Connect a commercially available Bluetooth compatible headset to the handset to talk wirelessly.Sending dataReceiving dataBluetooth functionSupported version and supported profiles](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-29.png)
![109File Management To register/connect a Bluetooth device, the Bluetooth passkey may need to be entered. Before starting the registration, decide the 1- to 16-digit number. Enter the same number on the handset and the other party’s Bluetooth device. Set the other party’s Bluetooth device to the registration stand-by status in advance.1In the home screen, [R]/[Settings]/[Bluetooth]2Slide [OFF] to the right3Select a Bluetooth device/[Pair] :Entering the Bluetooth passkey may be necessary depending on the other party’s Bluetooth device. Also, some Bluetooth devices may start connecting after completing registration.:To display/hide the handset’s name on the other party’s Bluetooth device: [SH-D]ƦThe handset name is automatically hidden when the period of time set for Visibility timeout has passed.:To search for Bluetooth devices: [SEARCH FOR DEVICES]:Touch [B] of a paired Bluetooth device to change the name and the connection type of the other party’s Bluetooth device.Wireless connection is available with Bluetooth device put in a bag or pocket. However, lowering of communication speed or noise may result when you are in between the Bluetooth device and the handset. Electromagnetic signals from the Bluetooth device may affect the operation of electronic medical equipment etc. As some cases may result in accident, turn off the handset and other Bluetooth devices in the following place.On trains On airplanes In hospitalsNearby automatic doors or fire alarmsIn places such as gas stations where flammable gas is generatedThe radio interference with Wi-Fi compatible devices The Bluetooth devices use the same frequency band (2.4 GHz) as wireless LANs (IEEE 802.11b/g/n). Therefore, using the Bluetooth device near a wireless LAN device may cause the radio interference, lowering of communication speed, noise or connection failure. In this case, turn off the wireless LAN device or keep the handset and the Bluetooth device at least approximately 10 m away from the wireless LAN.Bluetooth If you fail to connect, connection may become available after re-registration of Bluetooth devices.](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-31.png)
![110 File Management1Registration request/Connection request from Bluetooth device2Drag the status bar down/[Pairing request]/[Pair]:When the confirmation screen about the settings on pairing appears, select [Pair].:Entering the Bluetooth passkey may be necessary depending on the other party’s Bluetooth device.:The confirmation screen for connection may be displayed.1In the Bluetooth screen, [B] of the Bluetooth device to unregister/[Unpair]1In the Bluetooth screen, select the Bluetooth device to disconnect/[OK] Set after enabling Bluetooth function.1In the Bluetooth screen, [z]2Select an itemRename phone: Change the handset’s name.Visibility timeout: Set the time to be displayed on the other party’s Bluetooth device.aptX: Set whether to use aptX®.Handsfree setting: Set whether to always have voices emitted from the connected Bluetooth compatible hands-free device during a voice call.Show received files: Display the history of data received via Bluetooth connection. When the Bluetooth function is enabled, the handset is set to receive a registration request/connection request from other Bluetooth devices. Perform the setting for displaying the handset’s information on the other party’s Bluetooth device in advance to allow the handset to be searched for by other Bluetooth devices. While in connection stand-by, even if a connection request from a Bluetooth device is received, connection may not be made depending on the signal status etc. For details on the operations of the other party’s Bluetooth device, refer to the manuals of the Bluetooth device to be used.When receiving registration request from Bluetooth device or connection request from unregistered Bluetooth deviceDisabling registration of Bluetooth deviceDisabling connection of Bluetooth deviceSetting Bluetooth](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-32.png)
![111File ManagementExample: Still picture1In the home screen, [R]/[SH tool]/[Recommendation]/[Contents manager]2Touch a still picture for a while/[Share]/[Bluetooth]:Set the receiver’s Bluetooth device to receive data.3Select a Bluetooth device to connect to1Send data from the sender’s Bluetooth device2Drag the status bar down/select data to receive/[Accept]3Drag the status bar down/select the received dataTransmit 1Seg audio, music data, sounds from Navigation and ౷ͺίς (Map appli), etc. via FM radio waves and receive and play the data via FM radio, FM tuner mounted on a car, etc. 1In the home screen, [R]/[Settings]/[FM transmitter]2Slide [OFF] to the right3Select an itemFrequency setting: Set the frequency of the FM radio waves.Auto OFF setting: Set when to automatically disable the FM transmitter when 1Seg audio, music, etc. is not played. 4Set the frequency on the receiver5Play music etc.Sending and receiving by BluetoothSending dataReceiving data Note that if you select [Delete all before registration] at receiving all data, all data registered to the target function are deleted. Some data cannot be received all. When available space in the save destination becomes insufficient, the data being received to that point are saved and receiving ends.FM transmitter FM transmitter is not available when the handset is in the following cases. If the handset enters into one of the following cases when the FM transmitter is enabled, the FM transmitter will be disabled automatically.During Airplane modeDuring Bluetooth connectionDuring international roamingWhen the handset has been out of the service area since you turned the power on Receivers may not emit sounds in the following cases even when the FM transmitter is enabled.During chargingDuring USB connectionDuring earphone connectionDuring MHL™ connection](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-33.png)
![112 File Management1Insert the handset side connector of Micro USB Cable 01 (sold separately) horizontally into the external connector terminal on the handset (1)2Insert the PC side connector of Micro USB Cable 01 horizontally into the USB connector on the PC (2):For details on the mode of USB connection nP. 100You can use a microSD Card inserted into the handset as external memory for a PC. Insert a microSD Card and set the mode of USB connection to [Card reader mode] in advance (nP. 100). When using a microSDXC Card, refer to Transferring data (nP. 113). When a message indicating to format the microSDXC Card is displayed, do not format it. Receivers do not emit sounds in the following cases even when the FM transmitter is enabled.During a callDuring an incoming call Adjust the volume on the handset or the receiver when it is emitting sounds via the FM transmitter. Also, when you terminate the FM transmitter function, make sure that the volume of the handset and the receiver are not too loud before the termination.External device connectionConnecting the handset and PC Use a USB cable Micro USB Cable 01. USB cables for PC are not available, since the connector shape is different. Using a USB HUB may prevent the equipment from working normally. Do not remove Micro USB Cable 01 while exchanging data with PC. Data may be damaged. Windows XP, Windows Vista and Windows 7 all of which are Japanese version are available OS of PCs for the connection.microSD reader/writerKeep sidewith thecharactersdownOpen externalconnectorterminal coverMicro USB Cable 01data](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-34.png)
![113File Management1Connect the handset to a PC via Micro USB Cable 01:The USB mass storage screen appears. If the screen does not appear, drag the status bar down and select [USB connected]. 2[Turn on USB storage]:When the confirmation screen is displayed, check the content and select [OK].3Use as a microSD reader/writer4Perform secure hardware removal on the PC after use5[Turn off USB storage]6Disconnect Micro USB Cable 01 from the handsetTransfer data from a PC to the handset memory or a microSD Card. Set the mode of USB connection (nP. 100) to [MTP mode] in advance. When using a PC not compatible with MTP, set the mode to [PTP mode].1Connect the handset to a PC via Micro USB Cable 01:When the MediaJet installation screen is displayed, select [Skip].2Transfer data3Remove Micro USB Cable 01 from the handset after useInstall MediaJet on a PC to transfer music data/videos/still pictures on the handset and the PC. Set the mode of USB connection to [MTP mode] and enable MediaJet install in advance (nP. 100). Also, connect a PC to the Internet in advance.1Connect the handset to a PC via Micro USB Cable 012[Install]:The installation will start on the PC. Follow the instructions on the screen and operate after this step. Set the mode of USB connection (nP. 100) to [MTP mode] in advance. When using a PC not compatible with MTP, set the mode to [PTP mode].1Activate MediaJet on a PC2Connect the handset to the PC via Micro USB Cable 01:When the MediaJet installation screen is displayed, select [Skip].3Use MediaJet While using as a microSD reader/writer, microSD Card cannot be used by other applications. In addition, microSD Card may not be used as a microSD reader/writer while it is used by other applications.Transferring dataUsing MediaJetInstalling MediaJet To install MediaJet from a PC, refer to the following site.(http://mediaJet.nero.com) Transferring data by USB connectionance](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-35.png)
![114 File Management4Perform device removal by MediaJet after use5Disconnect Micro USB Cable 01 from the handset Enable the Wi-Fi function in advance (nP. 45).1Activate MediaJet on a PC2In the home screen, [R]/[Settings]/[MediaJet]/[PC Sync]/[OFF]:PC Sync is switched to ON and connection with the PC is made.3Use MediaJet4Perform device removal by MediaJet after use5In the home screen, [R]/[Settings]/[MediaJet]/[PC Sync]/[ON]:PC Sync is switched to OFF and connection with the PC is canceled.If a PC and the handset are connected to the same Wi-Fi access point, you can connect the handset with the PC via Wi-Fi just by charging the handset. Also, if you make settings on the PC side in advance, you can also transfer music data/videos/still pictures automatically when the handset is connected to the PC. Install MediaJet (nP. 113) and enable the Wi-Fi function in advance (nP. 45).Settings on the handset side1In the home screen, [R]/[Settings]/[MediaJet]/[Preferences]/[PC Sync Settings]/[Allowed Wi-Fi network]2Select an access point to be allowed/[OK]3[Wi-Fi Auto Connect in charging mode]Settings on the PC side1Activate MediaJet on a PC2Connect the handset to the PC via Micro USB Cable 01 or the Wi-Fi function3In the MediaJet screen, select a device/[ΟΨͼΑ୪শͅু൲എͅ൳ܢ] (Automatically sync to my device when connected):To import the data in the handset memory automatically: [ΟΨͼΑ୪শͅΟΨͼΑ̥ͣু൲എͅͼϋεȜΠ] (Automatically import from device when connected)4[൳ܢίΏοϋ] (Sync Options)/select a playlist/an album to synchronize/[OK]Transferring data by Wi-Fi functionAutomatic connection/transference while chargingPreparation for automatic connection while chargingnP. 113) and edvance r use](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-36.png)
![116 File ManagementYou can display the same screen as that of the handset on the TV by connecting the handset to a TV with a wireless connection function.1In the home screen, [R]/[Settings]/[Wireless output]2Slide [OFF] to the right3Select a device to connect to:The setting screen is displayed depending on the device to connect to. For details on the setting content, refer to the manual of a TV you use.Transfer the videos that are recorded on Blu-ray Disc recorder to a microSD Card and play them. You cannot transfer the videos to a microSDXC Card. Connect Blu-ray Disc recorder to the handset via Micro USB Cable 01 (sold separately) to transfer videos. Connect to Blu-ray Disc recorder and set the mode of USB connection (nP. 100) to [Card reader mode]. Connection method is the same as for connecting the handset to PC or other devices (nP. 112). For details on transferring videos, refer to the manuals of the Blu-ray Disc recorder. Refer to the DOCOMO website for compatible models. If you transfer videos, the number of videos which can be saved on the microSD Card decreases. MHL™ cable Two types of microUSB plug shape are available. When connecting an MHL™ cable, insert it securely. Inserting or removing it forcibly may damage the external connector terminal or connector or result in a malfunction. When removing the plug, hold the plug and remove it slowly. Connect the MHL™ cable to the HDMI input terminal of a TV.Wireless output Wireless output is not available depending on the application being activated. Wireless output is terminated during its use depending on the application being activated. Wireless output stops automatically when the battery level becomes insufficient. Wireless output is not available during a call, incoming call or the MHL™ connection. If you receive a call during the wireless output, the wireless output automatically stops. When Energy saving Wi-Fi is set in Energy save, you may not be able to connect the handset to the device to connect to properly. In this case, disable Energy saving Wi-Fi.Cooperating with Blu-ray Disc recorder](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-38.png)
![121ApplicationsOsaifu-Keitai is a function which has built-in IC card and allows you to pay, use as coupons or collect stamps by simply holding the handset over the scanning device at stores.Moreover, you can access sites and web pages by holding the handset over the scanning device, and get the latest coupon, deposit electronic money and check your usage by using communication. In addition, for your secure use, you can lock functions of Osaifu-Keitai when you lost the handset.For details on Osaifu-Keitai, refer to “̮၌ဥ΄ͼΡήΛ· (spκȜΡ༎)” (Mobile Phone User’s Guide [sp-mode]) (in Japanese only).ɦTo use Osaifu-Keitai compatible service, settings are necessary on a website or an application. The handset malfunctions may cause data (including electronic money, points, etc.) saved in the IC card to be lost or changed (Note that as a rule, you will be asked to delete data when leaving your handset for repairs etc., since we cannot keep your handset with such data still remaining in it). For the service such as a reissue, restoration, temporary keeping or transference of the data, contact your provider of Osaifu-Keitai compatible service. Be sure to use the Osaifu-Keitai compatible service including a backup service for important data. DOCOMO shall not be liable for any loss or change of data in the IC card or other damages of Osaifu-Keitai service caused by any reason such as malfunctions and model changes. When the handset is stolen or lost, immediately contact your provider of Osaifu-Keitai compatible service for handling methods.iC transfer service is a service that enables you to move the data saved in the IC card to new Osaifu-Keitai from the old one when changing Osaifu-Keitai such as by changing models or repairing the handset.iC transfer service is available at a docomo Shop near you.For details on iC transfer service, refer to “̮၌ဥ΄ͼΡήΛ· (spκȜΡ༎)” (Mobile Phone User’s Guide [sp-mode]) (in Japanese only). To use Osaifu-Keitai compatible services, download the Osaifu-Keitai compatible application from Osaifu-Keitai compatible sites and make the setting. Some services do not need to download the Osaifu-Keitai compatible application.1In the home screen, [R]/[Osaifu-Keitai]:If the initial setting is not completed, the initial setting screen appears.2Select a serviceOsaifu-Keitai iC transfer serviceUsing Osaifu-Keitai You cannot use Osaifu-Keitai in the following situations. However, you can pay by holding the handset over a scanning device.In Airplane modeWhen you are charging the handset, connecting Micro USB Cable 01 (sold separately) to it or connecting an earphone/microphone to it while the docomo mini UIM card is not inserted/When the handset has never received radio wave](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-39.png)
![122 ApplicationsHold the a mark of the handset over the scanning device to use as electronic money or railway tickets, to retrieve ToruCa, etc. Pay attention to the following points when holding the a mark over the scanning device.Do not contact between the handset and the scanning deviceHold the a mark in parallel with the scanning deviceSlowly hold the a mark over the center of the scanning deviceIf the scanning device does not recognize the built-in IC card, hold the a mark over the scanning device and move the handset aroundDo not attach a metallic substance on the a mark side1Hold the a mark over the scanning device2Confirm that the data is scannedLock the function of Osaifu-Keitai. Perform the same operation to disable the lock.1In the home screen, [R]/[Osaifu-Keitai]2[Lock Settings]/[Next]/enter the passcode/[OK]/[OK]ToruCa is an electronic card that can be imported to the handset. You can retrieve it as store information or a coupon from a scanning device or sites. Retrieved ToruCa is saved in the “ToruCa” application and you can display/search/update it using the application.For details on ToruCa, refer to “̮၌ဥ΄ͼΡήΛ· (spκȜΡ༎)” (Mobile Phone User’s Guide [sp-mode]) (in Japanese only).1In the home screen, [R]/[ToruCa]Holding over scanning device markOsaifu-Keitai lock settingToruCa Packet communication charges may be incurred for retrieving, displaying or updating ToruCa. ToruCa provided for i-mode handsets may not be retrieved/displayed/updated. The following functions may not be used depending on the settings of IP (Information Provider).Retrieving from a scanning deviceUpdatingSharing ToruCaMoving or copying to a microSD CardDisplaying a map1scanning device](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-40.png)
![152 International RoamingInternational roaming (WORLD WING) is a service that enables you to use the same phone number and mail address of the handset as you use in Japan in the service area of DOCOMO affiliated overseas network operators without changing your phone number and mail address. You can use calls and SMS without any changes in settings.Available networkThe handset is rated as class 4. You can use it in the 3G network and GSM/GPRS network service area. In addition, this service is available in countries and regions supporting 3G 850 MHz/GSM 850 MHz. Check the available area. For areas out of Xi area such as overseas, connect to 3G or GSM/GPRS network.Refer to the following before using the handset overseas.“Mobile Phone User’s Guide [International Services]”DOCOMO International Services website* Enable Data roaming to use data communication when roaming (nP. 154).Check followings in Japan before using the handset overseas.Subscription Check the status of a subscription for WORLD WING. For details, contact “General Inquiries” on the back of this manual.Charging battery Use FOMA AC Adapter 01 for Global use (sold separately), FOMA AC Adapter 02 (sold separately) or AC Adapter 03 (sold separately) as an AC adapter for charging while traveling overseas. Accompanying Wireless Charger SH02 cannot be used overseas.International RoamingOutline of international roaming (WORLD WING) For country codes, international call access number, universal number international prefix and information on available countries, regions, and network operators, refer to “Mobile Phone User’s Guide [International Services]” or the DOCOMO International Services website.Available services overseasMain communication service 3G3G850GSM(GPRS)LTECall AAABSMS AAABMail*AAABBrowser*AAAB Some services are not available depending on the network operator or network.Before use overseasCheck before departuree Data roaming to roaming](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-41.png)
![153International RoamingCharge Overseas charges (call charges, packet communication charges) differ from those in Japan. Since some applications automatically perform packet communication, the packet communication charges may be higher. Contact the application provider for the operation of each application.Network service settingsIf you subscribed to network services, network services such as Voice Mail Service, Call Forwarding Service and Caller ID Display Request Service are available from overseas. However, some network services are not available. To use network services overseas, setting Remote operations to “Activate” is required. Remote operations can be set in your country of stay. Some network services that can be set/disabled etc. may not be available depending on overseas network operators.The handset automatically connects to the available network operator when you turn the power on in your country of stay.ConnectionWhen Network operators (nP. 155) is set to [Select automatically], the suitable network is automatically selected.Overseas packet communication is available with a fixed amount of charges as an upper limit per day by connecting to a compatible network operators. To use this service, subscription to flat-rate packet communication services in Japan is required. For details, refer to “Mobile Phone User’s Guide [International Services]” or the DOCOMO International Services website.Viewing the display [U] is displayed during international roaming. 3G/GSM/HSPA is available. Connected network operator can be checked in the status panel. Date & timeIf [Automatic date & time] of Date & time is enabled, the handset receives information on time and time differences from overseas network operator, then time and time differences are corrected. Time and time differences may not be adjusted correctly depending on overseas network operator. In such a case, set time zone manually. The correction timing differs depending on the network operator. For details on Date & time nP. 101Set before departureCheck in your country of stay](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-42.png)
![154 International RoamingInquiries When the handset or the docomo mini UIM card is lost or stolen overseas, promptly contact DOCOMO and conduct a procedure for canceling the use of service from your country of stay. Refer to the back of this manual for inquiries. Note that communication/call charges after the handset or the docomo mini UIM card is lost or stolen are incurred to the subscriber. For land-line phone, etc., “International call access number” of your country of stay or “Universal number international prefix” is required.The handset automatically connects to the DOCOMO network after returning to Japan. If it fails, perform the following settings. Set Network Mode to [LTE/3G/GSM (Auto)] (nP. 154). Set Network operators to [Select automatically] (nP. 155).At the time of purchase, the handset is set to automatically search for and switch to available networks. When you want to manually switch networks, set by performing following operations.1In the home screen, [R]/[Settings]/[Network settings]/[Mobile networks]2Select an itemData enabled: Enable data communication.Data roaming: For details nP. 154Access Point Names: Set an access point.Network Mode: For details nP. 154Network operators: For details nP. 155Set whether to use data communication when roaming.1In the home screen, [R]/[Settings]/[Network settings]/[Mobile networks]/[Data roaming]Set a network to use.1In the home screen, [R]/[Settings]/[Network settings]/[Mobile networks]/[Network Mode]2Select an itemLTE/3G/GSM (Auto): Switch to an available network automatically.LTE/3G: Use 3G network.GSM: Use GSM/GPRS network.Check after homecomingSettings to use overseasData roamingNetwork mode](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-43.png)
![155International RoamingSearch for networks and set a network operator to use.1In the home screen, [R]/[Settings]/[Network settings]/[Mobile networks]/[Network operators]:If the confirmation screen for data communication is displayed, check the content and select [OK].:Search for networks and a list of network operators is displayed.2Select a network operator:To search for network operators again: [Search networks]:To select a network operator automatically: [Select automatically]1In the home screen, [R]/[Phone]/[Dial]2“+” (touch “0” for a while)/enter country code, area code (city code) and the other party’s phone number/[0]:Alternatively, enter a phone number/[z]/[International call]/select a country code to enter a country code.ƦThe first “0” of the area code (city code) will be omitted.:When the area code (city code) begins with “0”, omit the “0” when dialing (Include the “0” when making a call to some countries or regions such as Italy).When you make a call to other countries from your country of stay, you can make an international call with simple operation using International Dial Assist. Set International dial assist in advance. The first “0” of a phone number will be converted to the country code you set in Country code automatically. 1In the home screen, [R]/[Phone]/[Dial]2Enter a phone number/[0]3[Converted number]Network operators If you manually set network operators overseas, set to [Select automatically] after returning to Japan.Making/Receiving a call in your country of stayMaking a call outside your country of stay (including Japan) Even if you notify the caller ID, [Unknown], [Private number], etc. appears depending on the network operator, and the caller ID may not be displayed correctly.Making a call using International Dial Assist](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-44.png)
![156 International Roaming1In the home screen, [R]/[Settings]/[Call]/[Roaming settings]/[International dial assist]2Select an itemAutomatic conversion function: Set whether to make calls using International Dial Assist.Country code: Set country code to use when using International Dial Assist.International prefix: Set international prefix to use when using International Dial Assist.You can make a domestic call in your country of stay in the same way as you do in Japan. Always enter the area code (city code), even when the number is in the same area.When you make a call to a “WORLD WING” subscriber overseas, the call is made as an international call to Japan regardless of your country of stay.1In the home screen, [R]/[Phone]/[Dial]2“+” (touch “0” for a while)/enter country code “81” (Japan), the other party’s mobile phone number excluding the first “0”/[0]You can receive a call overseas in the same way as you do in Japan.When having calls made to your handset from Japan, have your phone number entered just as a domestic call in Japan.When having calls made to your handset from countries other than Japan, have the international call access number and “81” (Japan) added to the beginning of your phone number with the first “0” excluded as an international call to Japan regardless of your country of stay.International call access number of the country of the caller-81-90 (or 80)-XXXX-XXXXSetting of International Dial AssistMaking a call in your country of stayMaking a call to a WORLD WING subscriber overseasReceiving a call When a call is received during international roaming, the call is forwarded from Japan. Call charges to Japan are incurred by the caller and receiving charges by the receiver.Having calls to your handset](https://usermanual.wiki/Sharp/HRO00173.operational-manual/User-Guide-1754278-Page-45.png)
