Sharp HRO00207 Cellular Phone User Manual manual
Sharp Corporation Cellular Phone manual
UserManual.wiki
>
Sharp
>
HRO00207 User Manual
>
Operation Manual
Contents
1.
Operation Manual
2.
Manual
3.
Bluetooth_Compliance
Operation Manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![IntroductionThank you for purchasing “SH-04F”.Be sure to read this manual before and during use to ensure proper operation. For optional parts (sold separately) compatible with the handset, refer to the DOCOMO website.(https://www.nttdocomo.co.jp/product/option/) (in Japanese only)Checking operation methodQuick Start Guide (Basic package)(in Japanese only)This guide describes operations of basic functions.User’s Manual (App of the handset)(in Japanese only)This manual describes detailed guidance and operations of functions.In the home screen, [R]/[Instruction Manual]To display help: [z]/[ུͺίς͈ঀ̞̥̹] (How to use this app)User’s Manual (in PDF format)This manual describes detailed guidance and operations of functions.Download from the DOCOMO website(http://www.nttdocomo.co.jp/english/support/trouble/manual/download/index.html) ɦThe URL and contents are subject to change without prior notice. The screens and illustrations in this manual are shown as examples. The actual screens and illustrations may differ. The explanations in this manual are based on the case when the home app is docomo LIVE UX. If you change the home app, operation procedures etc. may be different from the explanations of this manual. Note that “SH-04F” is referred to as “handset” in this manual. This manual refers to microSD Card, microSDHC Card or microSDXC Card as “microSD Card” or “microSD”. Reproduction of this manual in part or in whole without prior permission is prohibited. The contents of this manual are subject to change without prior notice.Basic packageSH-04F (includes warranty)Quick Start Guide (in Japanese only)Notes on usage(in Japanese only)](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-2.png)
![9Contents/Precautions Do not apply unnecessary force when inserting/removing the docomo mini UIM card. Customer is responsible for malfunctions arising from inserting docomo mini UIM card into a different IC card reader/writer etc. Always keep IC area clean. Clean only with a soft and dry cloth (such as the type used for eyeglasses). Keep a separate memo and note information stored on the docomo mini UIM card.DOCOMO shall not be liable for any loss of content. To protect the environment, please take any unneeded docomo mini UIM cards to a sales outlet such as a docomo Shop. Do not damage, touch haphazardly or short-circuit the IC.May cause data loss or a malfunction. Do not drop or otherwise subject the docomo mini UIM card to severe impact.May cause a malfunction. Never bend the docomo mini UIM card or place heavy objects on it.May cause a malfunction. Do not insert the docomo mini UIM card to the handset with a label or sticker attached on the card.May cause a malfunction. The handset supports the security function that meets the Bluetooth specification for security during communication using Bluetooth functions. However, the security may not be sufficient depending on the configuration etc. Take care of the security while making communication using Bluetooth function. Even if any leak of data or information occurs while making communication using Bluetooth function, DOCOMO shall not be liable for any loss of content. Radio frequenciesIn the home screen, [R]/[Settings]/[Device info]/[Authentication] to confirm the radio frequencies the Bluetooth function of the handset uses. The followings are the descriptions:ӱ2.4: This radio equipment uses the 2400 MHz band.ӲFH: The modulation system is the FH-SS system.ӳ1: The estimated coverage distance is 10 m or less.ӴXX: Another modulation system is used.ӵ4: The estimated coverage distance is 40 m or less.Ӷ: All radio frequencies between 2400 MHz and 2483.5 MHz are used and the frequencies for mobile object identifiers cannot be avoided. Cautions on using Bluetooth devicesBluetooth operates at radio frequencies assigned to the in-house radio stations for a mobile object identifier that have to be licensed and is used in production lines of a factory, specific unlicensed low power radio stations, and amateur radio stations (hereafter, referred to as “another radio station”) in addition to industrial, scientific and medical devices or home electric appliances such as microwave ovens.1. Before using the handset, make sure that “another radio station” is not operating nearby.2. If radio interference between the handset and “another radio station” occurs, avoid interference by moving immediately to another place or “turning off the power”.3. Contact the number listed in “General Inquiries” on the last page for further details. Wireless LAN (WLAN) uses radio waves to communicate information. Therefore, it has an advantage of freely connecting to the LAN within the service area. On the other hand, if security setting is not set, it is possible for a malicious third party to intercept the communication contents or hack. It is recommended to set security setting at your own risk and judgement. Wireless LANDo not use wireless LAN near magnetic devices such as electric appliances or AV/OA devices or in radio waves.ƦMagnetism or radio waves may increase noises or disable communications (especially when using a microwave oven).ƦWhen used near TV, radio, etc., reception interference may occur or channels on the TV screen may be disturbed.ƦIf there are multiple wireless LAN access points nearby and the same channel is used, search may not work correctly. Radio frequenciesIn the home screen, [R]/[Settings]/[Device info]/[Authentication] to confirm the radio frequencies the WLAN-installed devices use. The followings are the descriptions:ӱ2.4: This radio equipment uses the 2400 MHz band.ӲDS: The modulation system is the DS-SS system.ӳOF: The modulation system is the OFDM system.Ӵ4: The estimated coverage distance is 40 m or less.ӵ: All radio frequencies between 2400 MHz and 2483.5 MHz are used and the frequencies for mobile object identifiers can be avoided.Available channels for the handset’s wireless LAN are between 1 and 13. Note that other channel access points cannot be connected.Available channels may vary depending on the country.For use in an aircraft, contact the airline beforehand. Cautions on using 2.4 GHz devicesWLAN-installed devices operate at radio frequencies assigned to the in-house radio stations for a mobile object identifier (radio stations requiring a license) used in production lines of a factory, specific unlicensed low power radio stations (radio stations requiring no license), and amateur radio stations (radio stations requiring a license) in addition to industrial, scientific and medical devices or home electric appliances such as microwave ovens.1. Before using this device, make sure that the in-house radio stations for a mobile object identifier, specific unlicensed low power radio stations and amateur radio stations are not operating nearby.2. If the device causes harmful radio interference to the in-house radio stations for a mobile object identifier, immediately change the radio frequency or stop use, and contact the number listed in “General Inquiries” on the last page for crosstalk avoidance, etc. (e.g. partition setup)3. If the device causes radio interference to specific unlicensed low power radio stations for a mobile object identifier or amateur radio stations, contact the number listed in “General Inquiries” on the last page for further details.Notes about docomo mini UIM cardNotes on using Bluetooth functionӱġ Ӳġ ӳġ Ӵġ ӵġӶġNotes about wireless LAN (WLAN)ӱġ Ӳġ ӳġ Ӵġӵġ](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-8.png)
![10 Contents/Precautions Cautions on using 5 GHz devicesIn the 5 GHz frequency band, three bands of 5.2 GHz/5.3 GHz/5.6 GHz band (W52/W53/W56) are available.ƦW52 (5.2 GHz band/36, 40, 44, 48 ch)ƦW53 (5.3 GHz band/52, 56, 60, 64 ch)ƦW56 (5.6 GHz band/100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch)Using 5.2 GHz/5.3 GHz band wireless LAN (W52/W53) outdoors is prohibited by the Radio Law. The FeliCa and NFC reader/writer, P2P function of the handset uses weak radio waves whose handling does not require a license of radio station. The frequency in use is the 13.56 MHz band. When another reader/writer, P2P function is being used nearby, keep enough distance from it. Make sure that there is no radio station using the same frequency band in the nearby area. For use in an aircraft, contact the airline beforehand. Use of FeliCa and NFC reader/writer, P2P function may be restricted in some countries.Check conditions such as regulations of the country/region to use the function. Never use the handset that is modified. Using a modified device violates the Radio Law and/or the Telecommunications Business Law.The handset follows the regulations regarding the certification of conformity with technical regulations for the specified radio station based on the Radio Law and authentication of conformity with technical regulations for the handset based on the Telecommunications Business Law, and the “Technical Conformity Mark ” can be displayed on the electronic nameplate of the handset as a proof. You can see it by operating as follows.In the home screen, [R]/[Settings]/[Device info]/[Authentication]If the screws of the handset are removed and a modification is given to the inside, the certification of conformity with technical regulations etc. will become invalid. Never use the handset without the valid certification etc. Doing so violates the Radio Law and/or the Telecommunications Business Law. Be careful when using the handset while driving a motor vehicle.Using a mobile phone in hand while driving is regarded as a punishable act.However, the punishment has no application in some cases such as when rescuing sick and injured people or maintaining public safety. Use the FeliCa reader/writer function only in Japan.The FeliCa reader/writer function of the handset conforms to the domestic radio wave standards. Using the function overseas may result in punishment. Never change the basic software improperly.This may be regarded as a conversion of software and repairs may be refused.SH-04F is waterproof to IPX5*1 and IPX7*2 standards if the docomo mini UIM card/microSD Card slot cover is securely closed.*1 IPX5 means that phone keeps functioning after being subjected to a jet flow (approximately 12.5 liters/min) discharged from a nozzle (inner diameter: 6.3 mm), from all directions (approximately 3 m from the handset) for 3 minutes or more.*2 IPX7 means that SH-04F phone keeps functioning after it is slowly submerged to depth of 1 m in static tap water at room temperature, left there for approximately 30 minutes and then taken out. You can call without using an umbrella in the rain (for rainfall of approximately 20 mm per hour). You can rinse off dirt from the handset. Wash the handset with low-pressure water flow (6 liters/min or lower and tap water at room temperature (between 5°C and 35°C)), holding it approximately 10 cm below faucet or shower head. Wash by using only your hands, not a brush or sponge, with the docomo mini UIM card/microSD Card slot cover held in position. Drain the handset before use (nP. 11 “Draining water when the handset gets wet”). You can use the handset at a poolside. Do not throw water in a swimming pool on the handset or soak the handset in the water of a swimming pool.To maintain waterproof performance, check the followings. Securely close the docomo mini UIM card/microSD Card slot cover. Be careful not to apply excessive force on the rubber gasket when opening and closing. Make sure that the docomo mini UIM card/microSD Card slot cover is completely closed without floating. To maintain waterproof performance, the handset has the docomo mini UIM card/microSD Card slot cover that allows you to close securely. May cause injuries to your nails or fingers if you try to open it forcibly. For details on how to open/close the docomo mini UIM card/microSD Card slot cover nP. 13 “Inserting docomo mini UIM card” When your hands or the handset is wet, do not open/close the docomo mini UIM card/microSD Card slot cover. Close the docomo mini UIM card/microSD Card slot cover securely. Even a fine obstacle (one hair, one grain of sand, tiny fiber, etc.) put between contact surfaces may allow water to get inside. If the handset gets wet with water or other liquids with the docomo mini UIM card/microSD Card slot cover opened, the liquid may get inside causing electric shocks or malfunction. Stop using the handset, turn off the power and contact a repair counter that DOCOMO specifies. The rubber gasket of the contact surface between the main body and docomo mini UIM card/microSD Card slot cover plays an important role in maintaining waterproof performance. Do not remove or scratch it. Also, prevent dust from adhering to it.If the rubber gasket is damaged or deformed, replace it at a repair counter that DOCOMO specifies. Do not insert a pointed object through the docomo mini UIM card/microSD Card slot cover gaps. It may cause damage to the rubber gasket and allow water to get inside. Do not use the handset underwater (including key operations). May cause malfunction. Do not apply water flow stronger than allowed (over 6 liters/min). May cause malfunction though SH-04F provides waterproof performance of IPX5.FeliCa and NFC reader/writerCautionWaterproofWhat you can do with waterproof of SH-04FThings to keep in mind To maintain waterproof performance, replacement of parts is recommended every 2 years regardless of whether the handset appears normal or abnormal. DOCOMO replaces the parts as a chargeable service. Bring the handset to a repair counter that DOCOMO specifies.Precautions](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-9.png)
![15 Before Using the HandsetɡEstimated battery life when fully charged For details on the battery life nP. 92 “Main specifications”ɡInternal battery usable life Internal battery is a consumable product. Battery life per charge is gradually reduced every time the battery is charged. When battery life per charge is reduced to about half of the default time, this means that the internal battery is approaching the end of its usable life. In this case, it is recommended to replace the battery as soon as possible. For details on replacing the internal battery, contact the number listed in “Repairs” (in Japanese only) on the last page or a repair counter that DOCOMO specifies. If you watch TV etc. while charging for a long time, the usable life of the internal battery may become shorter than estimated.ɡAC adapter and DC adapter Refer to user’s guide of AC Adapter 03/04 (sold separately) or DC Adapter 03/04 (sold separately). AC Adapter 03/04 covers from 100 to 240V AC. The shape of the plug for the AC adapter is for 100V AC (for domestic use). To use the AC adapter of 100 to 240V AC overseas, a conversion plug adapter applicable to your country of stay is required. Do not use a voltage converter for overseas travel to charge the battery.[Read the user’s guides of AC Adapter 03/04 (sold separately) and DC Adapter 03/04 (sold separately)] Following operations describe how to charge with AC Adapter 04 or DC Adapter 04.1Insert the microUSB plug of the AC adapter/DC adapter horizontally into the external connector terminal on the handset with the side marked with “B” turned down:Check the direction (front or rear) of the microUSB plug and insert it horizontally.2When you erect the AC adapter power plug and insert it into an outlet or insert the DC adapter power plug into a car cigarette lighter socket, the charging lamp illuminates and charging starts3When charging is complete, the charging lamp turns off4Remove the AC adapter power plug from the outlet, or remove the DC adapter power plug from the car cigarette lighter socket5Remove the microUSB plug of the AC adapter/DC adapter horizontally from the external connector terminalContinuous talk timeFOMA/3GApprox. $$ minGSMApprox. $$ minContinuous stand-by time FOMA/3GAt rest: Approx. $$ hr (Preferred network type: LTE/3G/GSM (Auto))GSMAt rest: Approx. $$ hr (Preferred network type: LTE/3G/GSM (Auto))LTEAt rest: Approx. $$ hr (Preferred network type: LTE/3G/GSM (Auto))Mobacas watching time Approx. $$ minTV watching time Full-Seg: Approx. $$ min1Seg: Approx. $$ minCharging with AC adapter/DC adapter Using unnecessary force when inserting or removing the equipment may cause damage to the external connector terminal and the microUSB plug or result in a malfunction.When using a DC adapter The DC adapter should only be used in negative grounded vehicles (12 and 24V DC).Charging lampmicroUSB plugKeep side marked with “B” downExternal connector terminal100V ACoutletCigarettelighter socketAC adapter DC adapterPower plugPower plug](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-11.png)
![16 Before Using the HandsetYou can charge the handset by connecting the handset to a PC with Micro USB Cable 01 (sold separately). For details on connecting to a PC nP. 80 “Connecting the handset and PC”ɡTurning power on1H (for at least 2 seconds):When you turn the power on for the first time, make the initial settings (nP. 22 “Initial setting”).ɡTurning power off1H (for at least 1 second)/[Power off completely]/[OK]ɡTurning power off forciblyYou can forcibly turn the power off if the screen does not respond or the power cannot be turned off.1H (for at least 8 seconds):Release your finger after the vibrator is activated to turn the power off.ɡSleep modeYou can quickly activate the handset when turning the power on again by setting the sleep mode.1H (for at least 1 second)/[To sleep]/[OK]ɡTurning display on/offThe display is turned off when H is pressed or the handset is not in use for a set length of time.Press H while the display is turned off to turn it on.ɡTouch panel lockWhen the power or the display is turned on, the touch panel is locked.Touch [J] to unlock.Operations in touch panel lock screen To set/disable the manner mode: y (for at least 1 second) To turn on/off the mobile light: x (for at least 1 second) To activate Camera/SH Camera: [K]/select an app/select an activation method To activate ̱͓̽̀͝ϋΏͿσ (Shabette-Concier)/Google: [W]/select an app/select an activation method To add a widget: Slide the left edge of the screen to the right/[+]/select a widgetƦTo move a widget: Slide the left edge of the screen to the right/touch and hold a widget/drag it to the destinationƦTo delete a widget: Slide the left edge of the screen to the right/touch and hold a widget/drag it to [Remove]The followings describe the operations to use the display (touch panel). Operations may differ depending on the function and screen in use. Do not use with the car engine shut off. May drain the car battery. The DC adapter fuse is a consumable product. For replacement, purchase a new fuse at a nearest auto parts retailer etc. Refer to the user’s guide of DC Adapter 03/04 for details.Charging with Micro USB Cable 01Turning power on/off Precautions about inserting and removing a microSD Card are displayed every time the handset power is turned on. Do not set the sleep mode but turn the power off when an airplane you are aboard is about to take off/land, the battery level is low, etc. Even if you set the sleep mode, the handset may not be quickly activated depending on its status such as when it has not been used for a long time. The status panel can be displayed when Screen lock is set to [Slide or Touch].Adding widgets Enable [Enable widgets] in advance (nP. 68 “Lock & security”). Unlock the touch panel after you touch [+] when Screen lock is set to an item other than [Slide or Touch].Basic operationOperation of touch panelCautions when using the touch panel The touch panel is designed to be lightly touched with your finger. Do not forcefully press with your finger or a pointed object (fingernail, ballpoint pen, pin, etc.). In the following cases, the touch panel may not work even if you touch it. May cause a malfunction.Operation with a gloved fingerOperation with the tip of a fingernailOperation with foreign objects placed on the operation padOperation on the touch panel on which a protective sheet or a sticker is putOperation while the touch panel is wetOperation with fingers wet with sweat or water Operations may be interrupted if you touch an area other than a confirmation screen or the status bar while the confirmation screen etc. is displayed.Widget](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-12.png)
![17 Before Using the HandsetɡTouchTouch a key or an item displayed on the screen and then release your finger from it to select or set it.ɡTouch and holdWhen you keep your finger on the touch panel, a menu may appear depending on the function and screen in use.ɡSlide/DragMove your finger while keeping it on the touch panel to scroll the screen or move an icon, widget, etc. to the desired position.In addition, when you touch a menu or item by mistake, move your finger away from it to cancel the selection.ɡFlickMove your finger like sweeping the touch panel in the home screen etc. to switch pages.ɡPinch out/Pinch inYou may be able to zoom the screen in/out etc. by putting two fingers on the touch panel and moving them with putting a distance between two fingers apart (pinch out)/closer (pinch in) depending on the function and screen in use.ɡNavigation keysUse the navigation keys displayed at the bottom of the screen to perform the basic operations.1{/v: Back key/Close key Return to the previous screen. Close the keyboard.2|: Home key Display the home screen.3z: Menu key Display available functions (menus).4}: Recent Apps key Display Quick Launcher or Recent Apps (nP. 27 “Quick Launcher”, P. 28 “Recent Apps”).ɡUsing user-aid functionYou can quickly activate apps supporting the user-aid function.1Slide any of the navigation keys up/slide it to [q]:If you have set the activation method of an app to [Always], the app is activated.2Select an app/select an activation methodɡOne hand operation modeYou can reduce the screen to operate the handset with one hand.1Slide any of the navigation keys up/slide it to [r]/[p]:Repeat the same operation as that done when reducing the screen to return it to the original size.ɡRetrieving menuWhen you touch [z] or touch and hold the screen, functions (menus) available in that screen appear.Example: Home screenOperation while using function You may not be able to reduce the screen depending on the screen being displayed.Set item list](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-13.png)
![23 Before Using the HandsetReset an access point to default setting.1In the home screen, [R]/[Settings]/[More...]/[Mobile networks]/[Access Point Names]/[z]/[Reset to default]sp-mode is an ISP owned by NTT DOCOMO for smartphones. In addition to the Internet connection, mail service with the same address you use on i-mode (@docomo.ne.jp) or other services are available. sp-mode is a paid service that requires subscription. For details on sp-mode, refer to the DOCOMO website.If you use Wi-Fi function of the handset, you can use mail or Internet by connecting to access points of your home, corporate network or public wireless LAN service. Packet communication is also available while Wi-Fi is set to [ON]. Wi-Fi connection is prioritized while Wi-Fi connection is set, but the connection is automatically switched to that of LTE/3G/GPRS network once Wi-Fi connection is terminated. Note that packet communication charges may be incurred in this case. Refer to the manual of your wireless LAN base unit when using the access point at home etc. Operate access point registration near the access point. If you use the docomo service/docomo cloud by using Wi-Fi function, set a docomo ID in advance. In the home screen, [R]/[Settings]/[docomo service/cloud]/[docomo ID୭] (Set docomo ID) to set it.1In the home screen, [R]/[Settings]/[Wi-Fi]2Slide [OFF] to the right3Select an access point:If you select an access point protected by security, enter the password (security key) and select [Connect].:To register access points manually: [ADD NETWORK]/enter the network SSID/set security/[Save]:WPS compatible access points can be easily registered. In the home screen, [R]/[Settings]/[Wi-Fi]/[EASY SETTINGS]/[WPS Push Button]/[WPS Pin Entry] to register an access point.:Alternatively, in the home screen, [R]/[Settings]/[Wi-Fi]/[EASY SETTINGS]/[AOSS] to connect to an access point. Follow the instructions on the screen and operate after this step.ɡDetailed settings1In the home screen, [R]/[Settings]/[Wi-Fi]/[z]/[Advanced]2Select an itemNetwork notification: Set whether to display a notification icon when an open network is detected.ƦSet it after setting Wi-Fi to [ON].Wi-Fi sleep policy: Set when to switch the Wi-Fi function to the sleep mode.Scanning always available: Set whether to scan networks by the location information service and other apps even when Wi-Fi is set to [OFF].Avoid poor connections: Set whether to use the Wi-Fi function only when stable Internet connections are available.Wi-Fi frequency band: Set the frequency band to use.Install certificates: Install certificates.MAC address: Confirm the MAC address.IP address: Confirm the IP address.ɡDisconnecting1In the home screen, [R]/[Settings]/[Wi-Fi]2Select the connected access point/[Forget]:Disconnect with the password retained.You can use the tethering function that connects a PC connected via Micro USB Cable 01 (sold separately), Wi-Fi compatible devices or a Bluetooth device to the Internet by using the handset as an access point. You can connect up to 12 devices in total at the same time: a PC connected via Micro USB Cable 01, ten Wi-Fi compatible devices and a Bluetooth device.1In the home screen, [R]/[Settings]/[More...]/[Tethering]2Select an itemUSB tethering: Set whether to use the USB tethering.ƦCheck the details of the precautions before use.Wi-Fi tethering: Set whether to use the Wi-Fi tethering.ƦCheck the details of the precautions before use.Set up Wi-Fi hotspot: Make settings for Wi-Fi tethering such as network SSID and security. If the settings of MCC and MNC are changed and the added access point disappears from the screen, reset the settings or set the access point manually.Resetting an access point When sp-mode is not subscribed or if you fail to make automatic setting of an access point due to signal status such as outside the service area, you are required to set the access point again manually.sp-modeWi-Fi settingsRadio interference with Bluetooth devices Wireless LANs (IEEE 802.11b/g/n) use the same frequency band (2.4 GHz) as Bluetooth devices. Therefore, using the wireless LAN device near a Bluetooth device may cause radio interference, lowering of communication speed, noise or connection failure. In this case, turn off the Bluetooth device or keep the handset and the wireless LAN device at least approximately 10 m away from the Bluetooth device. When you select an access point and connect to it with a wrong password (security key), [Avoided poor Internet connection], [Authentication problem] or [Connected (Limited)] is displayed. Confirm the password (security key). When [Avoided poor Internet connection] or [Connected (Limited)] is displayed after entering the correct password (security key), you may not have acquired the correct IP address. Connect to the access point again after confirming signal status. The registration process using WPS takes a few minutes. After completion of the registration of the access point, check that the proper connection to the access point is acquired. As for the manual registration of an access point, this function supports WEP, WPA/WPA2 PSK and 802.1xEAP as the security setting.Tethering](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-14.png)
![33 Call1In the home screen, []]/[Dial]2Enter a phone number:Always enter the city code, even when it is a local number.:You can set to notify/not to notify the other party of your phone number for each call by adding “186”/“184” to the head of the phone number.1Call Make a call. Also, if there are outgoing call history items, touch to enter the latest one when the phone number has not been entered.2Menu Display available functions (menus).3Favorites Display the contacts set as favorites.4Delete Delete an entered number. Touch and hold it to delete all the entered numbers.5Register6Dial Display the dial screen.7Outgoing/Incoming call history8Phonebook Display the phonebook.3[0]4[End call] to end the callWhen using services in which you are required to enter numbers additionally during a call, such as inquiry about the balance in your bank account or ticket reservation, enter pause (,)/wait (;) after entering a phone number to make a call with an additional number added to the main phone number.ɡAdding 2 seconds pauseAfter making a call to a main phone number, the handset automatically pauses for 2 seconds and an additional number is sent.1In the home screen, []]/[Dial]2Enter a phone number/[z]/[Add 2-sec pause]3Enter a number to send/[0]ɡAdding waitAfter making a call to a main phone number, the handset automatically waits and then a screen asking whether to send an additional number is displayed. Touch [Yes] to send an additional number.1In the home screen, []]/[Dial]2Enter a phone number/[z]/[Add wait]3Enter a number to send/[0]4[Yes] during the callWORLD CALL is an international calling service available from DOCOMO devices in Japan. Contact the number listed in “General Inquiries” on the last page for details on WORLD CALL. To make an international call through a company other than DOCOMO, contact the respective companies for instructions. The caller ID may not be notified or displayed correctly depending on overseas network operators. In this case, making a call with incoming call history is not available.CallMaking a call If you talk on the handset with your hair put between the earpiece and your ear, the proximity sensor may not work properly. The screen may be kept turned on and the call may be interrupted when the screen is touched accidentally.Entering touch-tone signalsEmergency callEmergency calls Phone numberPolice 110Fire and ambulance 119Marine emergency 118 The handset supports “Emergency call location notification”.When you make a call to an emergency number such as 110, 119 and 118, the information of your location (location information) is automatically notified to the agency that has received the emergency call (e.g. the police station). Depending on your location and the reception status of the signal, the agency that has received the emergency call may not be able to confirm the exact location.If you are not sending your caller ID by calling with “184” added or other means, your location information and phone number are not notified. However, if the agency that has received the emergency call considers your location information and phone number necessary for important purposes, such as life saving, the agency may retrieve them regardless of your settings.In addition, the area/timing to introduce “Emergency call location notification” depends on the state of preparation in each agency that receives emergency calls. In Japan, you cannot make a call to the emergency number (110, 119 or 118) when a docomo mini UIM card is not inserted, while the PIN code is locked, from the PUK (PIN Unlock Key) entry screen or from the password entry screen for decrypting the storage. When calling 110, 119 and 118 from your handset, the police or fire stations may return your call for verification purposes. State that you are calling from a mobile phone, and give your phone number and exact present location.Remain stationary to ensure that the call is not disconnected while you are on the line, and keep the handset turned on to receive calls for approximately 10 minutes afterwards. Depending on the region, calls to the police or fire station of the local area may not be made. When you make a call to the emergency number (110, 119 or 118) while Reject call setting is set, items of Reject call setting are set to [OFF].International call (WORLD CALL)](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-15.png)
![34 Call1When a call is received, the ringtone sounds and the incoming lamp flashes2Receive the call:Operate after touching [3].1Reject call with SMS You can reject the incoming call and send a selected SMS message to the other party.2Reject You can reject the incoming call.3Accept You can answer the call.3[End call] to end the callɡPlacing a call on hold1When a call is received, the ringtone sounds and the incoming lamp flashes2[z]/[On hold]ɡAnswering by answering memo1When a call is received, the ringtone sounds and the incoming lamp flashes2[z]/[Absence Memo]Playing an answering memo1In the home screen, []]/[z]/[Call settings]2[Call/Ans Memo]/[Answering Memo List]/select an answering memoYou can carry out operations such as using a hands-free call and adjusting the in-call volume according to the usage condition during a call.1End End a call.2Dialpad You can enter touch-tone signals.3Mute Enable or disable mute setting on a current call.4Speaker You can talk with hands-free. When a Bluetooth device is connected, you can switch sound emitting parts.5Hold Hold/Unhold a current call.ɡAdjusting the in-call volume1x/y during a call2[+]/[-]:Alternatively, press x/y to adjust the volume.3[Close]ɡUsing Noise suppressionWhen Noise suppression is set to [ON], you can measure ambient noises using the out-microphone and communicate by making your voices sound clear during a call.1x/y during a call2[OFF]/[ON] of Noise suppression3[Close]ɡUsing Slow TalkWhen Slow talk is set to [ON], the speed of the other party’s voice is slowed down during a call and you can hear the voice well.1x/y during a call2[OFF]/[ON] of Slow talk3[Close][Calling Method] When calling to a land-line phone: 010/country code/area code (city code)/the other party’s phone number/[0] When calling to a mobile phone: 010/country code/the other party’s mobile phone number/[0]ƦAs for the other parties’ mobile phone numbers and area codes (city codes) that begin with “0”, omit the first “0” when entering (except some countries or regions such as Italy).ƦAlternatively, enter “009130-010” as usual or “+” instead of “010”.Receiving a callIncoming lampOperation during a call Note the followings to use hands-free.ƦSpeak approximately 20 to 40 cm away from the mouthpiece. When the surroundings are noisy, the sound may break up and the call may not be satisfactory.ƦWhen calling outdoors, in a location where surroundings are noisy and where the sound echoes loudly, use an earphone/microphone.ƦIf the sound breaks up during a hands-free call, lower the in-call volume. Noise suppression processes voices to make conversations sound clear. Sound quality may vary depending on the surrounding noises and the tone of the voice. When using Noise suppression, make sure not to cover the hole of the out-microphone and move the mouthpiece as close to your mouth as possible for speaking.](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-16.png)
![38 Call1In the home screen, [R]/[docomo phonebook]/[Groups]2Use groups1Account2Group icon3Group name4Add group Add a group.5Group6Number of contacts registered in the group7SortɡGrouping/Ungrouping contacts1In the home screen, [R]/[docomo phonebook]/[Groups]2Select a group/[Delete member]/[Add member]3Select names/[OK]/[OK]You can display your phone number registered on the docomo mini UIM card. You can also register your name, mail addresses, etc.1In the home screen, [R]/[docomo phonebook]/[My profile]2Check/Use the profile1Image2Registered contents3Notice Make settings for Friends notice. Displayed only when you are using cloud computing.4EditɡEditing My profile1In the home screen, [R]/[docomo phonebook]/[My profile]/[Edit]2Set each item/[Save]You can back up/restore the phonebook by using docomo backup. For details on docomo backup (Backing up to/Restoring from a microSD Card) nP. 62 “Backing up to/Restoring from a microSD Card”Using groups You cannot sort groups other than ones created with a docomo account. The group function is available on contacts created with a docomo/Google account.My profileBacking up/Restoring phonebook](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-17.png)
![39 Mail/BrowserYou can send and receive mails using mail address of DOCOMO (@docomo.ne.jp). Pictograms and Deco-mail are available. Automatic reception is also supported. Also, mails can be easily transferred when you have lost the handset or changed models since sent and received mails are saved on the mail server of DOCOMO. Moreover, you can use the mailing function on any devices such as PCs and tablets if you use a docomo ID. For details on docomo mail, refer to the DOCOMO website.1In the home screen, [^]:Follow the instructions on the screen and operate after this step.You can send and receive text messages that include up to 670 full-width characters (up to 1530 characters for half-width alphanumeric only) with mobile phone numbers serving as destinations. You can also exchange messages with users of overseas network operators. Refer to “Mobile Phone User’s Guide [International Services]” or the DOCOMO International Services website for information on countries where this service is available and available overseas network operators.1In the home screen, [R]/[Messaging]2[0]/enter the destination and message/[@]1In the home screen, [R]/[Messaging]2Select a thread:Messages are grouped into a thread by destination/sender and displayed.1Image It is displayed if an image of the other party is registered in the phonebook. Touch to select and use an app supporting the registered contents of the phonebook. If the sender is not registered in the phonebook, you can register the person in the phonebook after touching it.2Number of unread messages3Destination/Sender4Number of messages in thread5Date and time of the message exchange3Check the message1Destination/Sender2Phone call3Menu Display available functions (menus).4Date and time of the message exchange5Message1In the home screen, [R]/[Messaging]2Select a thread3Enter the message/[@]1In the home screen, [R]/[Messaging]2Select a thread3Touch and hold a message/[Forward]/enter the destination and message/[@]1In the home screen, [R]/[Messaging]2Select a thread3Touch and hold a message/[Delete]/[Delete]1In the home screen, [R]/[Messaging]:To delete all threads: [z]/[Delete all threads]/[Delete]2Touch and hold a thread/[1]/[Delete]1In the home screen, [R]/[Messaging]2[z]/[Settings]3Select an itemSMS Enabled: Set an app to send and receive SMSs with.Delete old messages: When the number of saved messages reaches its limit, messages are automatically deleted from the oldest one.Text message limit: Set the number of messages to be saved by thread.Delivery reports: Notify you that sent messages have been received every time a message is received.Manage SIM card messages: Manage messages saved on the docomo mini UIM card.Mail/Browserdocomo mailSMS You can switch apps to send and receive SMSs with to Hangouts (nP. 68 “More”). If destinations are devices of overseas network operators, enter “+”, the country code and the recipient’s mobile phone number. If the phone number begins with “0”, omit the first “0”. Alternatively, enter “010”, the country code and the phone number. Half-width katakana and special symbols in SMS messages may not appear correctly for recipient. SMS cannot be sent when “186” or “184” is added.Displaying messageReplying messageForwarding messageDeleting messageDeleting threadSetting Messaging](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-18.png)
![40 Mail/BrowserNotifications: Notify you that messages have been received in the status bar.Sound: Set the ringtone to be rung when a message is received.Vibrate: Set the vibrator to be activated when a message is received.You can send and receive mails by setting up a mail account provided by a service provider. Set up an account in advance (nP. 24 “Setting up mail account”).1In the home screen, [R]/[Email]2[(]3Compose a mail:To attach an image or a video: [z]/[Attach file]/select a file1Destination When you enter part of a mail address or a name registered in the phonebook, destination candidates are displayed.2Subject3Message4Menu Display available functions (menus).5Account If you set multiple accounts, you can switch accounts.4[@] The screen may appear different depending on the account to use.1In the home screen, [R]/[Email]2Select a mail1Folder name/Account name being displayed Touch to switch folders and accounts.2Mails The background color of a read mail turns gray. Touch images to checkmark the mails and you can set them to be deleted/unread/read etc. collectively.3Star icon Use it as a mark indicating that the mail is special or supposed to be dealt with later. You can check starred mails in the Starred folder.4Newly compose mail5Menu Display available functions (menus).3Check the mail1Subject2Sender/Date and time of reception Touch the image to display available apps supporting the registered contents of the phonebook. If the sender is not registered in the phonebook, you can register the person in the phonebook after touching the image.3Destination Touch to display the details.4Message5Attached file6Star icon Use it as a mark indicating that the mail is special or supposed to be dealt with later. You can check starred mails in the Starred folder.7Reply all/Forward8Reply9DeleteaUnreadbMenu Display available functions (menus).[Delivery reports] When you send a message to mobile phones of other carriers, the notification for confirming that it has been received may not be sent to you.Email Some receiving side models may not be able to receive the subject completely. Mails sent from a Gmail account are treated as ones from a PC. When receiving side models set PC-mail rejection, mails cannot be sent. Mails that could not be sent for any reason will be saved in the Outbox as unsent mails. Depending on the signal status etc., texts may not appear correctly on the screen of the other party’s device.Attaching file A mail can include 5 MB worth of file attachments together with the message. There are no limits to the number of files to be attached. Depending on the receiving side device, files may not be received or correctly displayed/played. Also, the quality of videos may deteriorate or videos may be converted to continuous still pictures.Displaying mail](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-19.png)
![41 Mail/Browser1In the home screen, [R]/[Email]2Select a mail3[)]:To reply to all: [*] of the sender/[Reply all]:To forward: [*] of the sender/[Forward]4Compose a mail1Reply type Touch to switch Reply/Reply all/Forward.2Destination3Message4Quote text Touch to display/hide messages of the sender. You cannot operate it when forwarding mails.5Mail of sender6Menus Display available functions (menus).7Subject8Respond inline Enter the mail of the sender in the message.5[@]1In the home screen, [R]/[Email]:To delete selected mails: Touch the images of mails/[+]2Select a mail3[+]1In the home screen, [R]/[Email]/[z]/[Settings]2Select an itemGeneral settings: Make settings for the whole Email.:Select an account to make settings for the details on each account such as Signature and Email notifications.:Touch [ADD ACCOUNT] to add an account.Gmail is a mail service provided by Google. Set up a Google account in advance (nP. 24 “Setting up Google account etc.”). 1In the home screen, select “Google” folder/[Gmail]2[(]3Compose a mail:To attach a file: [z]/[Attach file]/select a file1Destination When you enter part of a mail address or a name registered in the phonebook, destination candidates are displayed.2Subject3Message4Menu Display available functions (menus).5Account If you set multiple accounts, you can switch accounts.4[@]1In the home screen, select “Google” folder/[Gmail]2Select a thread:In Gmail, mails are grouped into threads by reply and displayed. If new mails are replied ones of an existing mail, they are grouped into the same thread. A new thread is created for newly composed mails or mails whose subjects have been changed.1Label name/Account name being displayed Touch to switch displaying types and accounts.2Threads The background color of a thread turns gray when all mails in it are read. Touch images to checkmark the threads and you can set them to be archived/deleted/unread/read etc. collectively.3Number of mails in thread4Star icon Use it as a mark indicating that the mail is special or supposed to be dealt with later. You can check starred mails in the Starred folder.5Newly compose mail6Mail search7Menu Display available functions (menus).Replying/Forwarding mailDeleting mailSetting EmailGmailDisplaying mail](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-20.png)
![78 Data Communication To register/connect a Bluetooth device, the Bluetooth passkey may need to be entered. Before starting the registration, decide one- to sixteen-digit number. Enter the same number on the handset and the other party’s Bluetooth device. Set the other party’s Bluetooth device to the registration stand-by status in advance.1In the home screen, [R]/[Settings]/[Bluetooth]2Slide [OFF] to the right3Select a Bluetooth device/[Pair] :The confirmation screen for connection may be displayed.:Entering the Bluetooth passkey may be necessary depending on the other party’s Bluetooth device. Also, some Bluetooth devices may start connecting after completing registration.:To display/hide the handset’s information on other Bluetooth devices: [SL050]ƦThe handset’s information is automatically hidden when the period of time set for Visibility timeout has passed.:To search for Bluetooth devices: [SEARCH FOR DEVICES]:Touch [B] of a paired Bluetooth device to change the name and the connection type of the other party’s Bluetooth device.ɡWhen receiving registration request from Bluetooth device or connection request from unregistered Bluetooth device1Registration request/Connection request from Bluetooth device2Drag the status bar down/[Pairing request]/[Pair]:When the confirmation screen about the settings on pairing appears, select [Pair].:Entering the Bluetooth passkey may be necessary depending on the other party’s Bluetooth device.:The confirmation screen for connection may be displayed.ɡUnregistering Bluetooth device1In the Bluetooth screen, [B] of the Bluetooth device to unregister/[Unpair]ɡDisconnecting Bluetooth device1In the Bluetooth screen, select the Bluetooth device to disconnect/[OK]ɡSetting Bluetooth Set after setting the Bluetooth function to [ON].1In the Bluetooth screen, [z]2Select an itemRename phone: Change the handset’s name.Visibility timeout: Set how long the handset’s information will be displayed on the other party’s Bluetooth device.aptX: Set whether to use aptX®.Handsfree setting: Set whether to always have voices emitted from the connected Bluetooth compatible hands-free device during a voice call.BT Smart setting: Enable/Disable the BT Smart settings.Show received files: Display the history of data received via Bluetooth connection.Precautions about handling Bluetooth devicesNote the followings when using Bluetooth devices. Note the followings to make good connection.Keep the distance between the handset and another Bluetooth device within approximately 10 m with no obstructions in sight. The distance within which you can make connection may be shorter when there are obstructions between them or depending on the conditions of the surroundings (such as walls or furniture) and the structure of a building. Especially when there is a wall or floor of reinforced concrete between them, they may be unable to connect with each other. Note the above mentioned distance is not guaranteed.Move the handset and another Bluetooth device as far away as possible from home electric appliances, AV devices, OA devices, etc. before connection. Bluetooth devices are liable to be adversely affected by a microwave oven, so move them as far away as possible from the microwave oven while using them. Otherwise, normal connection cannot be performed when other electric devices are powered on or Bluetooth devices may cause noises or reception failure on a TV or radio set.Move the Bluetooth device to a place where connection is possible when there is a broadcast station or radio near the Bluetooth device and the handset cannot be connected to the device. Strong radio waves may prevent connection between Bluetooth devices.Wireless connection is available with Bluetooth devices put in a bag or pocket. However, lowering of communication speed or noise may result when you are in between the Bluetooth device and the handset. Electromagnetic signals from Bluetooth devices may affect the operation of electronic medical equipment etc. As some cases may result in accident, turn off the handset and other Bluetooth devices in the following place.On trains On airplanes In hospitalsNear automatic doors or fire alarmsIn places such as gas stations where flammable gas is generatedRadio interference with Wi-Fi compatible devices The Bluetooth devices use the same frequency band (2.4 GHz) as wireless LANs (IEEE 802.11b/g/n). Therefore, using a Bluetooth device near a wireless LAN device may cause the radio interference, lowering of communication speed, noise or connection failure. In this case, turn off the wireless LAN device or keep the handset and the Bluetooth device at least approximately 10 m away from the wireless LAN.Using Bluetooth function You can connect up to seven Bluetooth devices at the same time. Bluetooth devices may not work properly or the number of Bluetooth devices which can be connected at the same time may differ depending on the profile. If you fail to connect, connection may become available after re-registration of Bluetooth devices. When the Bluetooth function is set to [ON], the handset is set to receive registration requests/connection requests from other Bluetooth devices. Make the setting for displaying the handset’s information on other Bluetooth devices in advance to allow the handset to be searched for by other Bluetooth devices. While in connection stand-by, even if a connection request from a Bluetooth device is received, connection may not be made depending on the signal status etc. For details on the operations of the other party’s Bluetooth device, refer to the manuals of the Bluetooth device to be used.](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-21.png)
![79 Data CommunicationɡSending dataExample: Still picture1In the home screen, [R]/[Contents Manager]/[Photo]2Touch and hold a still picture/[Share]/[Bluetooth]:Set the receiver’s Bluetooth device to the reception stand-by status.3Select a Bluetooth device to connect toɡReceiving data1Data is sent from the sender’s Bluetooth device2Drag the status bar down/select the incoming notification/[Accept]3Drag the status bar down/select the received dataYou can make a Bluetooth Smart device respond to the handset operations or notify you of incoming calls or new mails by operating the handset if you connect the handset to the Bluetooth Smart device.ɡNotifying this deviceIf you have connected the handset to a Bluetooth Smart device, you can make the Bluetooth Smart device ring or vibrate by operating the handset.1In the Bluetooth screen, [B] of a connected Bluetooth Smart device/[Notify this device]2Select a notification methodɡAdvanced settingsYou can make settings for operations available when the handset is connected to a Bluetooth Smart device.1In the Bluetooth screen, [B] of a connected Bluetooth Smart device/[Advanced settings]2Select an itemIncoming call notification: Set whether to notify you through the Bluetooth Smart device when receiving a call.Mail reception notification: Set whether to notify you through the Bluetooth Smart device when receiving a mail.Alarm notification: Set whether to notify you through the Bluetooth Smart device when an alarm rings.Schedule notification: Set whether to notify you of schedule notifications from the calendar through the Bluetooth Smart device.Time change notification: Set whether to synchronize clocks between the Bluetooth Smart device and the handset.Link loss notification: Set how to notify you when the Bluetooth connection is temporarily disabled.NFC stands for Near Field Communication and is a near field wireless communication system which conforms to the international standards set by ISO (International Organization for Standardization). You can use the contactless IC card function, reader/writer function (R/W), Peer to Peer function (P2P), etc. on the handset.You can send and receive data to and from devices which support Reader/Writer, P2P function. Enable [Reader/Writer, P2P] and set Android beam to [ON] in advance (nP. 46 “NFC/Osaifu-Keitai settings”). Android beam is not available when NFC/Osaifu-Keitai lock is set. Android beam may not be available depending on the app. Communication with all devices which support Reader/Writer, P2P function is not completely guaranteed. The precautions about using Android beam are the same as those about iC communication (nP. 76 “When using iC communication”). Other precautions are the same as those for when you hold the handset over the other device (nP. 46 “Precautions about holding over the other device”).ɡSending dataExample: Phonebook1In the home screen, [R]/[docomo phonebook]/[Contacts]/select a name2Place the a mark over that of the other party’s device:[Touch to beam] appears.:If “License Agreement” is displayed, check the content, follow the instructions on the screen and operate.3Touch the screenɡReceiving data1Place the a mark over that of the other party’s device[aptX] When you enable [aptX], sounds may not be emitted depending on the Bluetooth device. In this case, disable [aptX].Sending and receiving by Bluetooth Note that if you select [Delete and register] when receiving all data, all data registered to the target function are deleted. Receiving all data may not be available depending on the data type. When available space in the save destination becomes insufficient while receiving data, the data being received to that point are saved and receiving ends.Bluetooth Smart device connection This is available only on Bluetooth Smart devices supporting FMP (Find Me Profile).NFC communicationAndroid beam](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-22.png)
![97 Appendix/Index The abbreviations of operating systems (Japanese versions) below are used in this manual.Windows 8.1 stands for Microsoft® Windows® 8.1, Microsoft® Windows® 8.1 Pro and Microsoft® Windows® 8.1 Enterprise.Windows 8 stands for Microsoft® Windows® 8, Microsoft® Windows® 8 Pro and Microsoft® Windows® 8 Enterprise.Windows 7 stands for Microsoft® Windows® 7 (Starter, Home Basic, Home Premium, Professional, Enterprise and Ultimate).Windows Vista stands for Windows Vista® (Home Basic, Home Premium, Business, Enterprise and Ultimate). The Bluetooth word mark and logos are owned by the Bluetooth SIG, INC. and any use of such marks by NTT DOCOMO, INC. is under license. Other trademarks and trade names are those of their respective owners. Google, Google logo, Android, Android logo, Google Play, Google Play logo, Google+, Google+ logo, Gmail, Gmail logo, Calendar logo, Google Maps™, Google Maps logo, Google Talk™, Google Talk logo, Google Chrome™, Google Chrome logo, Google Voice Search™ logo, Picasa™, Picasa logo, YouTube and YouTube logo are trademarks of Google Inc. This product includes software based on GNU General Public License (GPL), GNU Lesser General Public License (LGPL) and other licenses.For details on licenses of related software, in the home screen, [R]/[Settings]/[Device info]/[Legal information]/[Open source licenses]. Source codes of software based on GPL, LGPL and Mozilla Public License (MPL) can be referred to on the following website for free. For details, refer to the following website.https://sh-dev.sharp.co.jp/android/modules/oss/) (in Japanese only) The handset can unlock the SIM lock. Unlock the SIM lock to use non-DOCOMO SIM cards. SIM lock can be unlocked at a docomo Shop. Commission is incurred separately for unlocking SIM lock. When using non-DOCOMO SIM card, it cannot be used in LTE. Also, some services and functions may be unavailable. DOCOMO shall not guarantee any operation of the handset. For details on unlocking SIM lock, refer to the DOCOMO website.Open source softwareUnlocking SIM lock](https://usermanual.wiki/Sharp/HRO00207.Operation-Manual/User-Guide-2231479-Page-25.png)
