Sharp HRO00242 Smart Phone User Manual 12 APYHRO00242

Download:
Mirror Download [FCC.gov]
Document ID	3140398
Application ID	15LiOkTf92A6cMmKIKjQGw==
Document Description	12_User Manual_APYHRO00242.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	95.33kB (1191591 bits)
Date Submitted	2016-09-20 00:00:00
Date Available	2017-03-18 00:00:00
Creation Date	2016-09-06 16:52:24
Document Lastmod	2016-09-06 20:11:41
Document Title	12_User Manual_APYHRO00242.pdf

General Inquiries

(Business hours: 9:00 a.m. to 8:00 p.m.)
0120-005-250 (toll free)
※ Service available in: English, Portuguese, Chinese,
Spanish.
※ Unavailable from part of IP phones.
(Business hours: 9:00 a.m. to 8:00 p.m. (open all year
round))
■From DOCOMO mobile phones
(In Japanese only)
Repairs
(Business hours: 24 hours (open all year round))
■From DOCOMO mobile phones
(In Japanese only)
(No prefix) 113 (toll free)
※ Unavailable from land-line phones, etc.
■From land-line phones (In Japanese only)
0120-800-000 (toll free)
※ Unavailable from part of IP phones.
(No prefix) 151 (toll free)
※ Unavailable from land-line phones, etc.
■From land-line phones (In Japanese only)
0120-800-000 (toll free)
※ Unavailable from part of IP phones.
● Please confirm the phone number before you dial.
● For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or check the
docomo Shop etc. near you on the NTT DOCOMO website and contact.
NTT DOCOMO website https://www.nttdocomo.co.jp/english/
SH-02J
Inquiries from overseas (In case of loss, theft, unconnected, etc.)
(Business hours: 24 hours (open all year round))
■From DOCOMO mobile phones
Display “+” on the screen
INSTRUCTION MANUAL
-81-3-6832-6600 (toll free)
(to enter “+”, touch and hold “0”.)
※ You can call using international call access code instead of “+”.
■From land-line phones
International call access code
for the country you stay
-81-3-6832-6600 (charges apply)
※ You are charged a call fee to Japan.
※ For international call access codes, refer to DOCOMO website.
● Please confirm the phone number before you dial.
● If you lose your handset or have it stolen, immediately take the steps necessary for suspending the use of the handset.
● If the handset you purchased is damaged, bring your handset to a repair counter specified by DOCOMO after returning to
Japan.
Don’t forget your mobile phone… or your manners!
When using your mobile phone in a public place, don’t forget to show common courtesy and consideration for others around you.
Sales:
Manufacturer: SHARP Corporation
’16.● (1st Edition)
16● MK*** 1
’16.●
SH-02J_E.book
0 ページ
２０１６年９月２日
金曜日
午後１２時１１分
Introduction
Thank you for purchasing “SH-02J”.
Be sure to read this manual before and during use to ensure proper operation.
Checking operation method
Basic package
Quick Start Guide (Basic package)
(in Japanese only)
This guide describes part names and functions.
Quick Start Guide
(in Japanese only)
User's Manual (App of the handset)
(in Japanese only)
This manual describes detailed guidance and
operations of functions.
In the home screen, [ ]/[Instruction Manual]
SH-02J
(includes warranty)
User's Manual (in PDF format)
This manual describes detailed guidance and
operations of functions.
Download from the DOCOMO website
(https://www.nttdocomo.co.jp/english/support/
trouble/manual/download/sh02j/index.html)
※ The latest information can be downloaded. The URL
and contents are subject to change without prior
notice.
The screens and illustrations in this manual are shown as
examples. The actual screens and illustrations may differ.
The explanations in this manual are based on the case when
the home app is docomo LIVE UX and the setting of kisekae is
[Champagne Gold]. If you change the home app, operation
procedures etc. may be different from the explanations of this
manual.
Note that “SH-02J” is referred to as “handset” in this manual.
This manual refers to microSD Card, microSDHC Card or
microSDXC Card as “microSD Card” or “microSD”.
Reproduction of this manual in part or in whole without prior
permission is prohibited.
The contents of this manual are subject to change without
prior notice.
SH-02J_E_01.fm
[0/13]
~~~
Notes on usage
(in Japanese only)
Optional parts (sold separately) compatible with the handset can
also be checked and purchased on docomo online shop.
(https://www.mydocomo.com/onlineshop/options/index.html)
(in Japanese only)
SH-02J_E.book
4 ページ
２０１６年９月２日
金曜日
午後１２時１１分
Precautions (ALWAYS FOLLOW
THESE DIRECTIONS)
Handling the handset, adapters and docomo
nano UIM card (general)
Before use, read these “Precautions” carefully and use your
handset properly.
These precautions contain information intended to prevent
bodily injury to the user and to surrounding people, as well
as damage to property, and must be observed at all times.
The following symbols indicate the different degrees of
injury or damage that may occur if information provided is
not observed and the handset is used improperly.
Danger
Do not use, store or leave the equipment in
locations subject to high temperatures or
accumulation of heat (near a fire or heating unit, in
a kotatsu or bedding, under direct sunlight, inside a
vehicle on a hot day, etc.).
May cause fires, burns, bodily injury, electric shock, etc.
Danger
This symbol indicates that
“death or serious bodily
injury (*1) may directly and
immediately result from
improper use”.
Warning
This symbol indicates that
“death or serious bodily
injury (*1) may result from
improper use”.
Caution
This symbol indicates that
“minor injury (*2) and/or property
damage (*3) may result from
improper use”.
Do not place the equipment inside cooking
appliances such as microwave ovens and induction
cookers or high pressure vessels such as pressure
cookers, or near them.
May cause fires, burns, bodily injury, electric shock, etc.
Do not sprinkle sand, soil or dirt on the equipment
or put the equipment directly on it. Also, do not
touch the equipment when sand etc. is adhering to
your hand.
May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness/
dustproofness.
>P. 11 “Waterproof/Dustproof”
Do not charge the equipment while it is wet with
liquids such as water (drinking water, sweat,
seawater, pet urine, etc.).
*1 Serious bodily injury: This refers to loss of eyesight, bodily
injury, burns (high- and low-temperature), electric shock,
broken bones, injuries with residual aftereffects from poisoning,
etc., and injuries requiring hospital admission for treatment or
long-term hospital attendance as an outpatient.
*2 Minor injury: This refers to bodily injury, burns (high- and
low-temperature), electric shock, etc. that do not require
hospital admission for treatment or long-term hospital
attendance as an outpatient.
*3 Property damage: This refers to extended damage to buildings,
furniture, livestock, pets, etc.
The following symbols indicate specific directions.
Indicates a
prohibited action.
Indicates not to
handle the device
with wet hands.
Indicates not to
disassemble the
device.
Indicates that
instructions
specified are
compulsory (must
be followed).
Indicates not to use
the device near
water or get it wet.
Indicates that the
power cord must be
unplugged from the
outlet.
“Precautions” is explained in the following six sections.
Handling the handset, adapters and docomo nano UIM card
(general) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handling the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handling adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handling docomo nano UIM card . . . . . . . . . . . . . . . . . . . . .
Handling near electronic medical equipment . . . . . . . . . . . .
Material list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness.
>P. 11 “Waterproof/Dustproof”
Do not attempt to disassemble or modify the
equipment.
May cause fires, burns, bodily injury, electric shock, etc.
Do not get the equipment wet with liquids such as
water (drinking water, sweat, seawater, pet urine,
etc.).
May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness.
>P. 11 “Waterproof/Dustproof”
Do not allow liquids such as water (drinking water,
sweat, seawater, pet urine, etc.) to get inside the
charger terminal or external connection jack.
May cause fires, burns, bodily injury, electric shock, etc.
Refer to the following for details on waterproofness.
>P. 11 “Waterproof/Dustproof”
Use only optional parts specified by NTT DOCOMO.
May cause fires, burns, bodily injury, electric shock, etc.
Warning
Do not subject the equipment to strong force,
impacts or vibration such as letting it fall, stepping
on it or throwing it.
P. 4
P. 5
P. 6
P. 7
P. 7
P. 8
May cause fires, burns, bodily injury, electric shock, etc.
Do not allow conductive materials (such as metal
objects and pencil lead) to come into contact with
the charger terminal or external connection jack or
dust to get inside it.
May cause fires, burns, bodily injury, electric shock, etc.
SH-02J_E_01.fm
[4/13]
Contents/Precautions
SH-02J_E.book
5 ページ
２０１６年９月２日
金曜日
午後１２時１１分
Do not cover or wrap the equipment with bedding
etc. when using or charging.
Handling the handset
May cause fires, burns, etc.
Danger
If charging is not completed after the specified
charging time, stop charging.
May cause fires, burns, bodily injury, etc. because of
overcharging.
Do not throw the handset into a fire or heat it.
May cause fires, burns, bodily injury, etc. because of
catching fire, exploding, overheating or leaking of the
battery.
Be sure to turn off the handset and not to charge
the battery in locations where flammable gas may
be generated such as gas stations and where dust
is generated.
Do not apply excessive force on the handset such
as puncturing it with a nail (sharp object), hitting it
with a hammer (hard object) or stepping on it.
May cause explosions, fires etc. if using the equipment in
location where flammable gas etc. is generated.
To use Osaifu-Keitai in locations such as gas stations, be
sure to turn off the power in advance (If NFC/Osaifu-Keitai
lock is set, disable the lock before turning off the power).
May cause fires, burns, bodily injury, etc. because of
catching fire, exploding, overheating or leaking of the
battery.
If the substance etc. inside the internal battery
comes into contact with your eyes, do not rub your
eyes but immediately rinse your eyes with clean
water. Then seek prompt medical treatment.
If any trouble such as an unusual odor, unusual
noise, smoking, overheating, discoloration or
deformation is found during use, charge or storage,
follow the instructions below.
May result in loss of eyesight etc. because of the substance
etc. inside the internal battery.
Unplug the power plug from the outlet or accessory
socket.
Turn off the handset.
May cause fires, burns, bodily injury, electric shock, etc. if
you do not follow the instructions above.
If the substance etc. inside the display comes into
contact with your eyes or mouth, immediately rinse
the contacted area with clean water. Then seek
prompt medical treatment.
May result in loss of eyesight, sick, etc. because of the
substance etc. inside the display.
Caution
Warning
Do not use a damaged equipment.
May cause fires, burns, bodily injury, etc.
Do not point the illuminated light directly at
someone's eyes. Especially when you use it for
young children, keep sufficient distance from them.
Do not leave the equipment on unstable surfaces,
such as on a wobbly table or sloped surface. Be
very careful while the vibrator is set.
May fall and cause injury etc.
Do not use Mobile light near people's faces. Eyesight may
be temporarily affected leading to accidents etc.
Do not use or store the equipment in locations that
are subject to humidity, dust or high temperatures.
Do not illuminate or emit the mobile light at anyone
driving a car or other vehicles.
May cause fires, burns, electric shock, etc.
Refer to the following for details on waterproofness/
dustproofness.
>P. 11 “Waterproof/Dustproof”
May prevent a driver from driving safely and cause a traffic
accident etc.
If being used by a child, have a guardian teach him/
her the proper handling procedures and do not
have him/her use it improperly.
May cause spasm or loss of consciousness.
Do not watch the screen which is flashing
repeatedly for a long time.
Do not allow water or other liquids (drinking water,
sweat, seawater, pet urine, etc.), metal, flammable
material or other foreign object to enter the docomo
nano UIM card slot or microSD Card slot on the
handset.
Also, do not insert the docomo nano UIM card or
microSD Card in the wrong place or wrong side.
May cause bodily injury etc.
Do not place the equipment where the young
children can reach it.
A young child may swallow the equipment, or suffer bodily
injury, electric shock, etc.
May cause fires, burns, bodily injury, electric shock, etc.
Be careful when using the handset continuously for
a long time or charging because it may become
warm. Also, be careful not to touch it
unintentionally for a long time when you fall asleep
etc.
Do not expose the camera lens to direct sunlight
etc. for an extended period.
May cause fires, burns, bodily injury etc. because of the
light-collecting mechanism of the lens.
The handset or adapter may become warm when using an
app, a call, data communication, watching video, etc. for a
long time or charging.
Directly touching a warmed part for a long time may cause
redness, itching, rashes, low-temperature burns, etc. on
your skin depending on your constitution or health condition.
Turn off the handset or set it to Airplane mode
before going aboard an airplane.
Since using the handset on airplanes is restricted, follow the
instructions given by the respective airlines.
May interfere with the operation of electronic devices
installed on the airplane.
If you commit a prohibited act while using the handset on an
airplane, you may be punished by law.
SH-02J_E_01.fm
[5/13]
Contents/Precautions
SH-02J_E.book
6 ページ
２０１６年９月２日
金曜日
午後１２時１１分
Follow the instructions given by the respective
medical facility regarding the use of the handset in
a hospital.
If the display is broken and the internal substance
etc. then leaks, do not get it on your skin (face,
hands, etc.), clothes, etc.
Turn off the handset in areas where the use of mobile
phones is prohibited.
May interfere with the operation of electronic devices and
electronic medical equipment.
May result in damage to your eyes or skin etc.
If the internal substance etc. comes into contact with your
eyes, mouth, skin or clothes, immediately rinse the
contacted area with clean water.
Also, if it comes into contact with your eyes or mouth, seek
medical treatment immediately after rinsing the contacted
area.
Keep the handset away from the ears during a call
in which hands-free is set, while the ringtone is
ringing loudly, during stand-by, etc.
When you attach the earphone/microphone etc. to
the handset to play games, video/music, etc., do
not make the volume too loud.
Do not dispose of the handset in ordinary garbage.
May cause fires, burns, bodily injury, etc. because of
catching fire. Also, may damage to the environment. Take
the unnecessary handset to a sales outlet such as a
docomo Shop or follow the instructions by a local institution
that handles used handsets.
Excessively high volume or using the handset continuously
for a long time may damage your hearing etc.
Also, it may prevent you from hearing ambient sounds and
cause an accident.
If the substance etc. inside the internal battery
leaks, do not get the liquid on your skin (face,
hands, etc.).
If you have a weak heart, take extra precautions
when setting functions such as the vibrator and
ringtone volume for incoming calls.
May result in damage to your eyes or skin etc.
If the internal substance etc. comes into contact with your
eyes, mouth, skin or clothes, immediately rinse the
contacted area with clean water.
Also, if it comes into contact with your eyes or mouth, seek
medical treatment immediately after rinsing the contacted
area.
May have harmful effects on your heart.
If you are using electronic medical equipment etc.,
contact the respective manufacturer or dealer to
check whether the operation of the equipment is
affected by signals.
May interfere with the operation of electronic medical
equipment etc.
If you use the handset in a vehicle, contact the
vehicle manufacturer or dealer to check whether
the operation of the vehicle is affected by signals.
Turn off the handset near high-precision electronic
devices or devices that use weak electronic
signals.
May interfere with the operation of electronic equipment in
some vehicle models. In this case, stop using the handset.
May interfere with the operation of electronic devices.
If any trouble on your skin is occurs due to using
the handset, immediately stop using it and seek
medical treatment. Use of the handset may cause
itching, rashes, eczema, etc. depending on your
constitution or health condition.
※ Take particular care with the following devices
Hearing aids, implanted cardiac pacemakers, implanted
cardioverter-defibrillators, other electronic medical
equipment, other equipment controlled by electronic signals,
etc. If you use an implanted cardiac pacemaker, implanted
cardioverter-defibrillator or other electronic medical
equipment, contact the respective manufacturer or dealer to
check whether the operation of the equipment is affected by
signals.
Refer to the following for details on materials of each part.
>P. 8 “Material list”
Make sure that there is no metal (a blade of cutter,
staple, etc.) on the handset because the earpiece/
speaker section and back camera section contain
parts that generate magnetic waves.
If the display part or camera lens is damaged, be
careful of broken glass and the exposed inside of
the handset.
May cause bodily injury etc. because of the adhered object.
May cause burns, bodily injury, electric shock, etc. if you
touch the broken or exposed parts.
Look at the display in a well-lit place, keeping a
certain distance.
If the internal battery leaks or emits an unusual
odor, immediately stop using the handset and
move it away from any naked flames or fire.
Eyesight may be weakened etc. if you look at it in a dark
place or closely.
The battery fluid is flammable and could ignite, causing a
fire, explosion, etc.
Handling adapters
Do not allow a pet etc. to bite the handset.
Warning
May cause fires, burns, bodily injury, etc. because of
catching fire, exploding, overheating or leaking of the
internal battery.
Do not use if the cord of the adapter is damaged.
May cause fires, burns, electric shock, etc.
Caution
Never use the adapter in humid locations such as a
bathroom.
Do not swing the handset by its strap etc.
May cause fires, burns, electric shock, etc.
May hit you or others around you, resulting in an accident
such as bodily injury.
The DC adapter should only be used in negative
grounded vehicles. Never use it in positive
grounded vehicles.
For using a motion sensor and geomagnetic
sensor, check the safety around, hold the handset
and do not swing it more than necessary.
May cause fires, burns, electric shock, etc.
May cause an accident such as bodily injury.
SH-02J_E_01.fm
[6/13]
Contents/Precautions
SH-02J_E.book
7 ページ
２０１６年９月２日
金曜日
午後１２時１１分
If the charger terminal is deformed such as bending
it, immediately stop using. Also, do not use the
deformed one by returning it to the original shape.
Do not touch adapters if you hear thunder.
May cause electric shock etc.
May cause fires, burns, bodily injury, electric shock, etc.
because of short circuit of it.
Do not short-circuit the charger terminal when
connected to an outlet or accessory socket. Also,
do not allow any part of your body (hands, fingers,
etc.) to come into contact with the charger terminal.
Unplug the power plug of the adapter from the
outlet or accessory socket when not using.
May cause fires, burns, bodily injury, electric shock, etc. if
you leave the power plug with it plugged into the outlet or
accessory socket .
May cause fires, burns, electric shock, etc.
Do not place heavy objects on the cord of the
adapter or apply excessive force on it such as
pulling it.
If water or other liquids (drinking water, sweat,
seawater, pet urine, etc.) enter the equipment,
immediately remove the power plug from the outlet
or accessory socket.
May cause fires, burns, electric shock, etc.
When plugging/unplugging an AC adapter into/from
the outlet, do not allow metallic straps or other
metallic objects to come into contact with the
prongs of the plug.
May cause fires, burns, electric shock, etc.
Always unplug the power plug from the outlet or
accessory socket before cleaning the equipment.
May cause fires, burns, electric shock, etc.
May cause fires, burns, electric shock, etc. if you do not
unplug it.
Do not connect the voltage converter for overseas
travel (travel converter) to the AC adapter.
May catch fire, or cause overheat, electric shock, etc.
Caution
Do not apply excessive force on the connection
part with the adapter connected to the handset.
May cause fires, burns, bodily injury, electric shock, etc.
Do not touch the adapter for a long time when
connected to an outlet or accessory socket.
Do not handle the cord, charger terminal or power
plug of the adapter with wet hands.
May cause burns etc.
May cause fires, burns, electric shock, etc.
Handling docomo nano UIM card
Always use the specified power supply and voltage.
When using overseas, use the AC adapter that is
available overseas.
Caution
Using the incorrect power supply and voltage may cause
fires, burns, electric shock, etc.
AC adapter: 100V AC (Connect only with a household AC
outlet)
AC adapter available overseas: 100 to 240V AC (Connect
only with a household AC outlet)
DC adapter: 12/24V DC (for negative grounded vehicles
only)
Be careful with the cutting surface not to injure any
part of your body such as fingers when handling
the docomo nano UIM card.
May cause bodily injury etc.
Handling near electronic medical equipment
If you replace the fuse in the DC adapter, always
replace it with a specified fuse.
Warning
May cause fires, burns, electric shock, etc. if you use the
fuse other than specified one. Refer to the respective
manuals for information on specified fuses.
If you have electronic medical equipment such as
an implanted cardiac pacemaker or an implanted
cardioverter-defibrillator, always carry or use your
handset at least 15 cm away from your implant.
Wipe off any dust on the power plug.
May cause fires, burns, electric shock, etc. if you use the
power plug with dust adhering.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
Fully plug the adapter into the outlet or accessory
socket.
Patients receiving medical treatment away from a
medical facility (e.g. home treatment) who are using
electronic medical equipment other than implanted
cardiac pacemakers or implanted
cardioverter-defibrillators should consult the
respective manufacturers etc. for information
regarding the effects of signals on the equipment.
May cause fires, burns, electric shock, etc. if you do not
insert it securely.
Always grasp the adapters when unplugging the
power plug from the outlet or accessory socket. Do
not apply excessive force on it such as pulling the
cord of the adapter.
May cause fires, burns, electric shock, etc. since the cord of
the adapter is damaged by pulling it.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
When plugging/unplugging an adapter into/from
the handset, plug/unplug it straightly toward the
terminal to connect, not applying excessive force
on it such as pulling the cord.
May cause fires, burns, bodily injury, electric shock, etc. if
you do not plug/unplug it correctly.
SH-02J_E_01.fm
[7/13]
Contents/Precautions
SH-02J_E_01.fm
8 ページ
２０１６年９月５日
月曜日
午後２時２分
Handling precautions
If there is any chance that the distance between the
handset and a person closest to you may get
shorter than 15 cm such as when you cannot freely
move around, set the handset not to emit radio
wave in advance (by setting Airplane mode, turning
the power off, etc.).
General notes
SH-02J is waterproof/dustproof, however, do not allow
liquid such as water (drinking water, sweat, seawater, pet
urine, etc.) and foreign object such as dust to get inside the
handset and do not allow them to adhere to optional parts.
Somebody nearby may be equipped with electronic medical
equipment such as an implanted cardiac pacemaker or an
implanted cardioverter-defibrillator. Electromagnetic signals
may have harmful effects on the operation of the electronic
medical equipment.
The adapter and docomo nano UIM card are not waterproof/
dustproof. Do not use in humid or steamy areas such as bathrooms
and avoid exposing to rain and other forms of moisture. If they are
carried close to the skin, perspiration may cause internal components
to corrode and result in malfunction. Note that if a problem is found to
be due to moisture, the handset and parts are not covered by
warranty and in some cases may be irreparable. Even when repairs
are possible, repair charges will be incurred, since the damage is not
covered by warranty.
Follow the instructions given by the respective
medical facilities regarding the use of the handset
on their premises.
May have harmful effects on the operation of the electronic
medical equipment.
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
Material list
･ Forceful rubbing of the display with a dry cloth etc. may scratch its
surface.
･ Water drops, dirt, etc. left on the display may cause stains to form
on its surface.
･ Never use chemicals such as alcohol, thinners, benzene or
detergents, as these agents may erase the printing or cause
discoloration.
Handset
Part
Material/Surface treatment
Display side
Reinforced glass/Antifouling
coating
Back
PC resin + ABS resin/Coating
Power key
Aluminum/Anodizing
Volume up/down key
Aluminum/Anodizing
Fingerprint sensor
Epoxy resin/Hard coating
Camera panel
Acrylic resin/Hard coating
Decoration of camera
Aluminum/Anodizing
Mobile light
PC resin
Earpiece/Speaker mesh
SUS/Coating
External connection jack (Metal
section)
Copper + SUS/Gold plating,
Tin plating
External connection jack (Resin
section)
PA resin
Docomo nano UIM Card and
microSD Card cover
PC resin/Coating
Hinge section of docomo nano
UIM Card and microSD Card
cover
Elastomer resin
Gasket of docomo nano UIM
Card and microSD Card cover
Silicon rubber
docomo nano UIM card slot
SUS
microSD Card slot
SUS/Ni plating
Tray for inserting docomo nano
UIM card
POM resin
IMEI plate
PET resin
Occasionally clean terminals with a dry cotton swab etc.
Dirty terminals may result in poor connections and loss of power or
insufficient battery charge. Keep the terminals clean with a dry cotton
swab etc.
Be careful with the terminals while cleaning them.
Do not place the equipment near an air conditioning vent.
Condensation formed due to rapid changes in temperature may
cause internal corrosion and lead to a malfunction.
Do not apply excessive force on the handset when using it.
Carrying the equipment in a tightly packed bag or sitting on it put in
your pocket may cause damage to the display, internal components,
internal battery, etc. or result in a malfunction.
Keeping an external connector device plugged into the external
connection jack may cause damage or a malfunction.
Do not rub or scratch the display with metal etc.
May scratch it and cause a malfunction or damage.
Read the respective user's guides supplied with supported
optional parts carefully.
Do not drop or otherwise subject the handset to severe
impact.
May cause a malfunction or damage.
Notes about the handset
Do not forcefully press the surface of the touch panel or
operate with a pointed object such as a fingernail, ballpoint
pen or pin.
May damage the touch panel.
Avoid using the handset in extremely high or low
temperatures.
Use the handset within the range of a temperature between 5°C and
35°C and a humidity between 45% and 85%. For details on using it at
a bathroom >P. 11 “What you can do with waterproof/dustproof of
SH-02J”
Using the handset close to land-line phones, TVs, radios,
etc. may have harmful effects on the operation of such
equipment. Move as far away as possible from such items
before use.
Back up to the microSD Card, PC, cloud, etc. or keep a
separate memo noting information stored on the handset.
DOCOMO shall not be liable for any loss of content.
When connecting an external connector device to the
external connection jack, do not put it in obliquely and do
not pull it while it is plugged in.
May cause a malfunction or damage.
SH-02J_E_01.fm
[8/13]
Contents/Precautions
SH-02J_E.book
9 ページ
２０１６年９月２日
金曜日
午後１２時１１分
Do not charge the internal battery in the following locations.
The handset becomes warm during use or charging but this
is not a malfunction.
Do not leave the camera in direct sunlight.
･ Areas with high humidity or dust, or in areas exposed to frequent
vibrations
･ Close to land-line phones, TVs, radios, etc.
May cause discoloration or burn-in of pixels.
Adapters may become warm during charging but this is not
a malfunction.
Do not use the DC adapter to charge the battery when the
car engine is not running.
Use the handset with the docomo nano UIM Card and
microSD Card cover closed.
Liquid such as water (drinking water, sweat, seawater, pet urine, etc.)
or foreign object such as dust may get inside and cause a
malfunction.
May cause the car battery to run down.
Do not give a strong impact on the fingerprint sensor or
scratch the surface.
When using an outlet with a feature to prevent the plug from
being removed accidentally, follow the instructions in the
outlet user's guide.
Do not subject to strong impacts. Also, do not deform the
charger terminals.
May cause not only malfunction of the fingerprint sensor but also
disabling authentication.
Clean the fingerprint sensor with a soft and dry cloth (such
as the type used for eyeglasses).
May cause a malfunction.
When the fingerprint sensor is dirty or gets wet on the surface, it
cannot read the fingerprint and may degrade the authentication
performance or cause an error.
Notes about docomo nano UIM card
While using a microSD Card, do not remove the card or turn
off the handset.
Do not apply unnecessary force when inserting/removing
the docomo nano UIM card.
Customer is responsible for malfunctions arising from
inserting docomo nano UIM card into a different IC card
reader/writer etc.
Always keep IC area clean.
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
Keep a separate memo and note information stored on the
docomo nano UIM card.
May cause data loss or a malfunction.
Never place a magnetic card near the handset.
The stored magnetic data in cash cards, credit cards, telephone
cards, floppy disks, etc. may be erased.
Never place magnetized items near the handset.
Putting highly magnetized items closer may cause an error.
Do not cover the proximity sensor area with a film or
sticker, or dirty it.
Each function for using the proximity sensor may not work normally.
Refer to the following for details on the position of the proximity
sensor.
>P. 14 “Part names and functions”
DOCOMO shall not be liable for any loss of content.
To protect the environment, please take any unneeded
docomo nano UIM cards to a sales outlet such as a docomo
Shop.
Do not damage, touch haphazardly or short-circuit the IC.
The internal battery is a consumable product.
Though the battery life varies with use, change the battery if the
battery life is extremely short even after being fully charged. For
details on replacing the internal battery, contact the number listed in
“Repairs” (in Japanese only) on the last page or a repair counter that
DOCOMO specifies.
May cause data loss or a malfunction.
Do not drop or otherwise subject the docomo nano UIM
card to severe impact.
May cause a malfunction.
Never bend the docomo nano UIM card or place heavy
objects on it.
Charge battery in areas where ambient temperature is
between 5°C and 35°C.
The battery life depends on the usage and deterioration of
the battery.
Depending on usage, the internal battery may swell as it
approaches the end of its usable life.
Note that if a problem is found to be due to swelling of the
internal battery, the handset and parts are not covered by
warranty and in some cases may be irreparable. Even when
repairs are possible, repair charges will be incurred, since
the damage is not covered by warranty.
Avoid the following situations when the handset is stored.
May cause a malfunction.
Do not insert the docomo nano UIM card to the handset with
a label, sticker, etc. attached on the card.
May cause a malfunction.
･ Storage with the internal battery fully charged (immediately after
charging is completed)
･ Storage with no battery level (cannot turn the handset on)
May lower the performance or shorten the usable life of the internal
battery.
Approximately 40% is recommended as the proper battery level for
storage.
The following is the type of the internal battery built into the
handset.
Label
Battery type
Li-ion00
Lithium-ion
The surface of the handset uses the aluminum material.
Note that dent and abrasion are easily remained as
aluminum is a soft material.
Notes about adapters
Charge the battery in areas where the ambient temperature
is between 5°C and 35°C.
SH-02J_E_01.fm
[9/13]
Contents/Precautions
SH-02J_E.book
10 ページ
２０１６年９月２日
金曜日
午後１２時１１分
Radio frequencies
In the home screen, [ ]/[Settings]/[About phone]/
[Authentication] to confirm the radio frequencies the
WLAN-installed devices use. The followings are the
descriptions:
Notes on using Bluetooth function
The handset supports the security function that meets the
Bluetooth specification for security during communication
using Bluetooth functions. However, the security may not
be sufficient depending on the configuration etc. Take care
of the security while making communication using
Bluetooth function.
Even if any leak of data or information occurs while making
communication using Bluetooth function, DOCOMO shall
not be liable for any loss of content.
Radio frequencies
In the home screen, [ ]/[Settings]/[About phone]/
[Authentication] to confirm the radio frequencies the
Bluetooth function of the handset uses. The followings are
the descriptions:
①
②
③
④
①
③
④
⑤
2.4: This radio equipment uses the 2,400 MHz band.
DS: The modulation system is the DS-SS system.
OF: The modulation system is the OFDM system.
4: The estimated coverage distance is 40 m or less.
: All radio frequencies between 2,400 MHz
and 2,483.5 MHz are used and the frequencies for mobile
object identifiers can be avoided.
Available channels for the handset's wireless LAN are between 1
and 13. Note that other channel access points cannot be
connected.
Available channels may vary depending on the country.
For use in an aircraft, contact the airline beforehand.
①
②
③
④
⑤
⑤
⑥
①
②
③
④
⑤
⑥
②
Cautions on using 2.4 GHz devices
WLAN-installed devices operate at radio frequencies
assigned to the in-house radio stations for a mobile object
identifier (radio stations requiring a license) used in
production lines of a factory, specific low power radio
stations (radio stations requiring no license), and amateur
radio stations (radio stations requiring a license) in addition
to industrial, scientific and medical devices or home electric
appliances such as microwave ovens.
1. Before using this device, make sure that the in-house
radio stations for a mobile object identifier, specific low
power radio stations and amateur radio stations are not
operating nearby.
2. If the device causes harmful radio interference to the
in-house radio stations for a mobile object identifier,
immediately change the radio frequency or stop use, and
contact the number listed in “General Inquiries” on the last
page for crosstalk avoidance, etc. (e.g. partition setup).
3. If the device causes radio interference to specific low
power radio stations for a mobile object identifier or
amateur radio stations, contact the number listed in
“General Inquiries” on the last page for further details.
2.4: This radio equipment uses the 2,400 MHz band.
FH: The modulation system is the FH-SS system.
1: The estimated coverage distance is 10 m or less.
XX: Another modulation system is used.
4: The estimated coverage distance is 40 m or less.
: All radio frequencies between 2,400 MHz
and 2,483.5 MHz are used and the frequencies for mobile
object identifiers cannot be avoided.
Cautions on using Bluetooth devices
Bluetooth operates at radio frequencies assigned to the
in-house radio stations for a mobile object identifier that
have to be licensed and are used in production lines of a
factory, specific unlicensed low power radio stations, and
amateur radio stations (hereafter, referred to as “another
radio station”) in addition to industrial, scientific and
medical devices or home electric appliances such as
microwave ovens.
1. Before using the handset, make sure that “another radio
station” is not operating nearby.
2. If radio interference between the handset and “another
radio station” occurs, avoid interference by moving
immediately to another place or “turning off the power”.
3. Contact the number listed in “General Inquiries” on the
last page for further details.
Voluntary control for radio wave interference
This product satisfies technical requirements based on
VCCI Rules for Voluntary Control Measures and its satisfied
mark is displayed on the electronic nameplate of the
product.
Notes about wireless LAN (WLAN)
Wireless LAN (WLAN) uses radio waves to communicate
information. Therefore, it has an advantage of freely
connecting to the LAN within the service area. On the other
hand, if security setting is not set, it is possible for a
malicious third party to intercept the communication
contents or hack. It is recommended to set security setting
at your own risk and judgement.
Wireless LAN
Do not use wireless LAN near magnetic devices such as
electric appliances or AV/OA devices or in radio waves.
You can see the electronic nameplate by operating the product as
follows.
In the home screen, [ ]/[Settings]/[About phone]/
[Authentication]
･ Magnetism or radio waves may increase noises or disable
communications (especially when using a microwave oven).
･ When used near TV, radio, etc., reception interference may
occur or channels on the TV screen may be disturbed.
･ If there are multiple wireless LAN access points nearby and
the same channel is used, search may not work correctly.
10
SH-02J_E_01.fm
[10/13]
Contents/Precautions
SH-02J_E.book
11 ページ
２０１６年９月２日
金曜日
午後１２時１１分
You can rinse dirt off from the handset. Wash the handset with
low-pressure water flow (6 liters/min or lower and tap water at
room temperature (between 5°C and 35°C)), holding it
approximately 10 cm below faucet or shower head. Wash by
using only your hands, not a brush or sponge, with the docomo
nano UIM Card and microSD Card cover held in position. Drain
the handset before use (>P. 12 “Draining water when the
handset gets wet”).
You can use the handset at a poolside. Do not throw water in a
swimming pool on the handset or soak the handset in the water
of a swimming pool.
You can use the handset in a bathroom.
FeliCa and NFC reader/writer
The FeliCa, NFC reader/writer and P2P function of the
handset use weak radio waves whose handling does not
require a license of radio station.
The frequency in use is the 13.56 MHz band. When another
reader/writer or P2P function is being used nearby, keep
enough distance from it. Make sure that there is no radio
station using the same frequency band in the nearby area.
For use in an aircraft, contact the airline beforehand. Use of
the function may be restricted in some countries.
Check conditions such as regulations of the country/region
to use the function.
･ Never charge the battery in a bathroom.
･ Never soak the handset in a bathtub, hot spring water or water
containing soap, detergent or bath powder. May cause a
malfunction. If water other than tap water adheres to the handset or
you fall the handset into the bathtub, immediately rinse off in
specific procedure, and drain water and dry naturally.
･ Use the handset within 2 hours in a bathroom where the range of a
temperature is between 5°C and 45°C and a humidity is between
45% and 99%. Be sure to drain water and dry naturally after using.
All function's continuous operations are not completely guaranteed.
･ Make sure not to splash hot water on the handset.
･ The rapid changes of temperature may cause condensation. Wait
until the handset reaches room temperature before you bring it from
a cold place into a warm place such as a bathroom. Also, do not
splash cold water on the warmed handset in a bathroom. May allow
water to get inside it or cause a malfunction.
･ If condensation occurs inside the camera lens and display, leave
the handset at room temperature for a while until the condensation
is removed.
･ The signal does not reach and a call or data communication may
not be available depending on the structure and conditions of the
bathroom.
･ Do not use the handset with an earphone/microphone or an
external connector device connected in a bathroom.
Caution
Never use the handset that is modified. Using a modified
device violates the Radio Law and/or the
Telecommunications Business Law.
The handset follows the regulations regarding the certification of
conformity with technical regulations for specific radio stations etc.
based on the Radio Law and authentication of conformity with
technical regulations for devices etc. based on the
Telecommunications Business Law, and the “Technical Conformity
Mark
” can be displayed on the electronic nameplate of the
handset as a proof. You can see it by operating as follows.
In the home screen, [ ]/[Settings]/[About phone]/
[Authentication]
If the screws of the handset are removed and a modification is given
to the inside, the certification of conformity with technical regulations
etc. will become invalid. Never use the handset without the valid
certification etc. Doing so violates the Radio Law and/or the
Telecommunications Business Law.
Be careful when using the handset while driving a motor
vehicle.
Using the handset in hand while driving is regarded as a punishable
act.
However, the punishment has no application in some cases such as
when rescuing sick and injured people or maintaining public safety.
The FeliCa reader and NFC reader/writer function of the
handset conform to the domestic radio wave standards.
When you use it overseas, check conditions such as
regulations of the country/region in advance.
Never change the basic software improperly.
Things to keep in mind
To maintain waterproof/dustproof performance, check the
followings.
Securely close the docomo nano UIM Card and microSD Card
cover. Be careful not to apply excessive force on the rubber
gasket when opening and closing.
Make sure that the docomo nano UIM Card and microSD Card
cover is completely closed without floating.
To maintain waterproof/dustproof performance, the handset has
the docomo nano UIM Card and microSD Card cover that allows
you to close securely. Note that opening it forcibly may cause
injuries to your nails, fingers, etc.
For details on how to open/close the docomo nano UIM Card and
microSD Card cover >P. 15 “Inserting docomo nano UIM card”
This may be regarded as a conversion of software and repairs may be
refused.
Waterproof/Dustproof
SH-02J is waterproof to IPX5*1 and IPX8*2 standards, and
dustproof to IP6X*3 standard if the docomo nano UIM Card and
microSD Card cover is securely closed.
*1 IPX5 means that phone keeps functioning after being subjected
to a jet flow (12.5 liters/min) discharged from a nozzle (inner
diameter: 6.3 mm), from all directions (approximately 3 m from
the handset) for 3 minutes or more.
*2 IPX8 means that SH-02J phone keeps functioning after it is
slowly submerged to depth of 1.5 m in static tap water at room
temperature, left there for approximately 30 minutes and then
taken out.
*3 IP6X means the level of dust protection. Phone has the ability
to prevent dust from entering inside after it is left in the device
containing dust (diameter: 75 μm or smaller) for 8 hours,
agitated and then taken out.
To maintain waterproof/dustproof performance, replacement of
parts is recommended every 2 years regardless of whether the
handset appears normal or abnormal. DOCOMO replaces the
parts as a chargeable service. Bring the handset to a repair
counter that DOCOMO specifies.
Precautions
When your hands are wet or water/foreign object adheres to the
handset, do not open/close the docomo nano UIM Card and
microSD Card cover.
Close the docomo nano UIM Card and microSD Card cover
securely. Even a fine obstacle (one hair, one grain of sand, tiny
fiber, etc.) put between contact surfaces may allow liquids or dust
to get inside.
What you can do with waterproof/dustproof
of SH-02J
You can call without using an umbrella in the rain (for rainfall of
approximately 20 mm per hour).
11
SH-02J_E_01.fm
[11/13]
Contents/Precautions
SH-02J_E.book
14 ページ
２０１６年９月２日
金曜日
午後１２時１１分
6 Proximity sensor/Brightness sensor*1
The proximity sensor detects the distance to the face and
prevents inadvertent operation of touch panel during a call.
The brightness sensor detects the brightness of the
surrounding area and adjusts the brightness of the backlight.
7 Display/Touch panel*2
For details on operation of the touch panel
>P. 18 “Operation of touch panel”
8 Incoming/Charging lamp
For details on incoming/charging lamp >P. 25 “Incoming/
Charging lamp”
9 1/2: Volume up/down key
Adjusts the volume in each function.
a 0: Power key
Use to turn the power on/off, etc.
Use to turn the display on/off.
For details on operation of the power key >P. 17 “Turning
power on/off”
b Fingerprint sensor
Use to unlock the touch panel etc. by fingerprint
authentication.
For details on using fingerprint sensor >P. 73 “Fingerprint
authentication”
c Strap hole
d Back camera
For details on using camera >P. 54 “SHCamera”
e Earphone/Microphone terminal
f Mobile light
g # mark
IC card is contained (It cannot be removed).
For details on using # mark >P. 49 “Osaifu-Keitai”,
P. 82 “NFC communication”
h External connection jack
For details on connection to an external device
>P. 17 “Charging with AC adapter/DC adapter”, P. 83 “PC
connection”, P. 84 “USB host function”
i Mouthpiece/Microphone
Use it during call, when recording videos, talking to EMOPA,
etc.
j LTE/FOMA antenna*3
k GPS antenna*3
l Wi-Fi/Bluetooth antenna*3
Before Using the Handset
Part names and functions
*1 Do not cover the sensor area with your hand or paste a sticker
etc. on the sensor area. The sensor may not work properly.
*2 If the handset is equipped with a commercially available
corresponding flip cover, you can turn the display on/off by
opening/closing the flip cover. If you close the equipped flip
cover obliquely, the display may not be turned off.
*3 The antenna of back is built into the main body. Covering the
antenna area with your hand may influence the quality.
The back cover cannot be removed. Removing it forcibly may
cause damage or malfunction.
Earpiece/Speaker
The earpiece is also a speaker. When you convert to a
hands-free talking, end a call, etc. the sound volume is turned
up to the set volume gradually so that the loud sound from the
speaker would not be sounded near your ear.
When you use [Answer] function of Suguden, they detect that
your ear is closing to the speaker from which the ringtone is
ringing and the ringtone volume is changed to proper volume.
However, the loud volume may be sounded about your ear
such as when not detecting that your ear is closing, so set the
ringtone volume properly and use.
1 Docomo nano UIM Card and microSD Card cover
2 docomo nano UIM card slot
The tray for inserting the docomo nano UIM card is stowed.
For details on docomo nano UIM card >P. 15 “docomo
nano UIM card”
3 microSD Card slot
For details on microSD Card >P. 78 “microSD Card
(external storage)”
4 Front camera
For details on using camera >P. 54 “SHCamera”
5 Earpiece/Speaker
The other party's voice on the phone, ringtone, music, etc. can
be heard from here.
Mobile light
The mobile light may be automatically turned off if you use the
handset for a long time or the handset becomes warm after the
mobile light is turned on. Also, you may not be able to use the
mobile light if the handset is warm.
14
SH-02J_E_02.fm
[14/29]
Before Using the Handset
SH-02J_E.book
17 ページ
２０１６年９月２日
金曜日
午後１２時１１分
When using a DC adapter
Charging with AC adapter/DC adapter
The DC adapter should only be used in negative grounded
vehicles (12 and 24V DC).
[Read the user's guides of AC Adapter 05 (sold
separately) and DC Adapter 04 (sold separately)]
Do not use with the car engine shut off. May drain the car
battery.
Following operations describe how to charge with AC Adapter 05
or DC Adapter 04.
The DC adapter fuse is a consumable product. For
replacement, purchase a new fuse at a nearest auto parts
retailer etc.
1 Insert the microUSB plug of the AC adapter/DC
adapter horizontally into the external
connection jack on the handset with the side
marked with “B” turned up
Refer to the user's guide of DC Adapter 04 for details.
Charging with Micro USB Cable 01
: Check the direction (front or rear) of the microUSB plug and
insert it horizontally.
You can charge the handset by connecting the handset to a PC
with Micro USB Cable 01 (sold separately).
For details on connecting to a PC >P. 83 “PC connection”
Charging lamp
Keep side marked
with “B” up
Turning power on/off
■ Turning power on
1 0 (for at least 2 seconds)
External connection jack
: When you turn the power on for the first time, make the initial
settings (>P. 23 “Initial settings”).
microUSB plug
■ Turning power off/Reboot/Emergency mode
1 0 (for at least 1 second)
2 Select an item
2 When you erect the AC adapter power plug and
insert it into an outlet or insert the DC adapter
power plug into a car accessory socket , the
charging lamp illuminates and charging starts
Power plug
100V AC
outlet
 Power off: Turn off the handset.
 Reboot: Reboot the handset.
 Emergency mode: For details >P. 19 “Emergency mode”
■ Turning display on/off
The display is turned off when 0 is pressed or the handset is not
in use for a set length of time.
Press 0 while the display is turned off to turn it on.
Power plug
■ Touch panel lock
When the power or the display is turned on, the touch panel is
locked.
Touch [ ] to unlock.
Accessory
socket
AC adapter
DC adapter
3 When charging is complete, the charging lamp
turns off
4 Remove the AC adapter power plug from the
outlet, or remove the DC adapter power plug
from the car accessory socket
5 Remove the microUSB plug of the AC adapter/
DC adapter horizontally from the external
connection jack
Operations in touch panel lock screen
To set/disable the manner mode: 2 (for at least 2 seconds)
To activate SHCamera: [
To activate しゃべってコンシェル (Shabette-Concier): [ ]
To activate Clock: Touch the clock
To display the detailed information on notifications: Drag the
clock down
To display the status panel: Drag the status bar down
The notifications are displayed in the lock screen of the touch
panel. You can make settings for displaying of notifications in
[When device is locked] (>P. 65 “Sound & notification”).
Note that inserting or removing the equipment forcibly may
cause damage to the external connection jack and the
microUSB plug or result in a malfunction.
17
SH-02J_E_02.fm
[17/29]
Before Using the Handset
SH-02J_E.book
18 ページ
２０１６年９月２日
金曜日
午後１２時１１分
■ Flick
If you set [エモパー設定] (EMOPA settings) to ON, various
information delivered by EMOPA is displayed under the clock.
Depending on the information, you can check the related
information or details by touching it twice.
Also, when [エモパーメモ] (EMOPA memo) is ON, you can use
EMOPA memo in the lock screen of the touch panel.
･ When [エモパー設定] (EMOPA settings) is set to ON, Clock is
not activated even if you touch the clock.
･ For details on EMOPA >P. 68 “EMOPA”
Move your finger like sweeping the touch panel in the home screen
etc. to switch pages.
■ Pinch out/Pinch in
You may be able to zoom the screen in/out etc. by putting two
fingers on the touch panel and moving them with putting a distance
between two fingers apart (pinch out)/closer (pinch in) depending
on the function and screen in use.
Basic operation
The followings describe basic operations of the handset such
as operations of the touch panel and navigation keys, and
operations for shooting screenshot.
Operation of touch panel
The followings describe the operations to use the display
(touch panel).
Operations may differ depending on the function and screen in
use.
Operation while using function
■ Navigation keys
Use the navigation keys displayed at the bottom of the screen to
perform the basic operations.
Cautions when using the touch panel
The touch panel is designed to be lightly touched with your
finger. Do not forcefully press with your finger or a pointed
object (fingernail, ballpoint pen, pin, etc.).
In the following cases, the touch panel may not work even if
you touch it. May cause a malfunction.
Operation with a gloved finger
Operation with the tip of a fingernail
Operation with foreign object placed on the operation pad
Operation on the touch panel on which a protective sheet,
sticker, etc. is put
Operation while the touch panel is wet
Operation with fingers wet with sweat, water, etc.
Operation under water
1 A/@: Back key/Close key
Return to the previous screen.
Close the keyboard.
2 B: Home key
Display the home screen.
3 C: Recent Apps key
Display Recent Apps (>P. 28 “Recent Apps”).
■ Using user-aid function
Operations may be interrupted if you touch an area other than a
confirmation screen or the status bar while the confirmation
screen etc. is displayed.
You can quickly activate an app supporting the user-aid function.
1 Touch and hold [B]
: To set an activating app: In the home screen, [ ]/
[Settings]/[Apps]/[ ]/[Default Apps]/[Assist & voice
input]/[Assist app]/select an app
■ Touch
Touch a key or an item displayed on the screen and then release
your finger from it to select or set it.
■ Retrieving menu
When you touch [ ]/[ ]/[ ] etc., slide the left edge of the
screen to the right or touch and hold the screen, functions (menus)
available in that screen appear.
Example: App list screen
■ Touch and hold
When you keep your finger on the touch panel, a menu may appear
depending on the function and screen in use.
■ Slide (Swipe)/Drag
Move your finger while keeping it on the touch panel to scroll the
screen or move an icon, a widget, etc. to the desired position.
In addition, when you touch a menu or an item by mistake, move
your finger away from it to cancel the selection.
Menu
■ Switching the settings
When a check box etc. is displayed beside the setting item, you can
set it enabled/disabled or ON/OFF by touching it.
18
SH-02J_E_02.fm
[18/29]
Before Using the Handset
SH-02J_E.book
24 ページ
２０１６年９月２日
金曜日
午後１２時１１分
3 Select an item
Wi-Fi settings
 Network notification: Set whether to display a notification
icon when an open network is detected.
･ Set it after setting [Wi-Fi] to On.
 Wi-Fi sleep policy: Set whether to disconnect Wi-Fi when the
display is turned off.
 Avoid poor connections: Set whether to use the Wi-Fi
function only when stable Internet connections are available.
 Install certificates: Install certificates.
 Wi-Fi Direct: Make settings for Wi-Fi Direct.
 Passpoint: Set whether to automatically connect to the
available Passpoint compatible access points when [Wi-Fi] is
set to On.
 MAC address: Confirm the MAC address.
 IP address: Confirm the IP address.
If you use Wi-Fi function of the handset, you can use mail or
Internet by connecting to access points of your home,
corporate network or public wireless LAN service.
Radio interference with Bluetooth devices
Wireless LANs (IEEE 802.11b/g/n) use the same frequency
band (2.4 GHz) as Bluetooth devices. Therefore, using the
wireless LAN device near a Bluetooth device may cause radio
interference, lowering of communication speed, noise or
connection failure. In this case, turn off the Bluetooth device or
keep the handset and the wireless LAN device at least
approximately 10 m away from the Bluetooth device.
Packet communication is also available while [Wi-Fi] is set to On.
Wi-Fi connection is prioritized while Wi-Fi connection is set, but
the connection is automatically switched to that of LTE/3G/GPRS
network once Wi-Fi connection is terminated. Note that packet
communication charges may be incurred in this case.
Refer to the manual of your wireless LAN base unit when using
the access point at home etc.
Operate access point registration near the access point.
If you use the docomo service by using Wi-Fi function, set
d ACCOUNT in advance. In the home screen, [ ]/[Settings]/
[docomo service/cloud]/[dアカウント設定] (Set d ACCOUNT)
to set it.
1 In the home screen, [
2 Set to On
3 Select an access point
■ Disconnecting
1 In the home screen, [ ]/[Settings]/[Wi-Fi]
2 Select the connected access point/
[DISCONNECT]
: Disconnect with the password retained. The access point
may be automatically connected again such as when the
display is turned on.
Tethering
You can use the tethering function that connects Wi-Fi
compatible devices, or PCs etc. connected via Micro USB
Cable 01 (sold separately) or Bluetooth communication to the
Internet by using the handset as an access point.
You can connect up to $$ devices in total at the same time: $$
PC connected via Micro USB Cable 01, $$ Wi-Fi compatible
devices and $$ Bluetooth devices.
The handset supports dial-up connections via DUN profile.
Before using Bluetooth tethering, register the other party's
Bluetooth device in advance (>P. 81 “Using Bluetooth
function”).
As for the settings on the Bluetooth device, refer to its manual.
]/[Settings]/[Wi-Fi]
: If you select an access point protected by security, enter the
password (security key) and select [CONNECT].
: To register access points manually: [ ]/[Add network]/
enter the network name/set security/[SAVE]
: WPS compatible access points can be easily registered. In
the home screen, [ ]/[Settings]/[Wi-Fi]/[ ]/[Easy
Settings]/[WPS Push Button]/[WPS Pin Entry] to register an
access point.
1 In the home screen, [
When you select an access point and connect to it with a wrong
password (security key), [IP Configuration Failure], [WiFi
Connection Failure] or [Authentication problem] is displayed.
Confirm the password (security key). When [IP Configuration
Failure] is displayed after entering the correct password
(security key), you may not have acquired the correct IP
address. Connect to the access point again after confirming
signal status.
2 Select an item
 USB tethering: Set whether to use the USB tethering.
 Wi-Fi tethering: Set whether to use the Wi-Fi tethering.
 Set up Wi-Fi hotspot: Make settings for Wi-Fi tethering such
as network name and security.
 Wi-Fi tethering Easy Connection: Set whether to use the
tethering by connecting to WPS compatible access points.
 Bluetooth tethering: Set whether to use the Bluetooth
tethering.
The registration process using WPS takes a few minutes. After
completion of the registration of the access point, check that the
proper connection to the access point is acquired.
As for the manual registration of an access point, this function
supports WEP, WPA/WPA2 PSK and 802.1xEAP as the
security setting.
[USB tethering]
The tethering function is available when OS of PCs is Windows
Vista, Windows 7, Windows 8.1, Windows 10 or Linux.
If you connect to an access point which is not connected to the
Internet, [ ] is displayed and the communication may be
made by mobile networks, not Wi-Fi connection.
To make Wi-Fi communication by using such an access point,
enable [Using this AP without internet connection] of Advanced
options before connecting to the access point.
A microSD Card inserted in the handset cannot be mounted on
a PC during USB tethering.
For details on USB tethering, refer to the following website.
(http://www.android.com/tether#usb)
[Wi-Fi tethering]
While the handset is functioning as an access point, it cannot
access the Internet via Wi-Fi connection.
■ Detailed settings
1 In the home screen, [
2 [ ]/[Advanced]
]/[Settings]/[Wi-Fi]
Make settings for Wi-Fi access points in [Set up Wi-Fi hotspot].
For details on Wi-Fi tethering, refer to the following website.
(http://www.android.com/tether#wifi)
24
SH-02J_E_02.fm
[24/29]
]/[Settings]/[More]/
[Tethering]
Before Using the Handset
SH-02J_E.book
35 ページ
２０１６年９月２日
金曜日
午後１２時１１分
Entering touch-tone signals
Call
When using services in which you are required to enter
numbers additionally during a call, such as inquiry about the
balance in your bank account or ticket reservation, enter
pause (,)/wait (;) after entering a phone number to make a call
with an additional number added to the main phone number.
You can use the phone and phonebook, and make settings for
call, voice/answering memo, operations available when calls
are received, etc.
Making a call
1 In the home screen, [
2 Enter a phone number
■ Adding 2 seconds pause
]/[Dial]
After making a call to a main phone number, the handset
automatically pauses for 2 seconds and an additional number is
sent.
: Always enter the city code, even when it is a local number.
: You can set to notify/not to notify the other party of your
phone number for each call by adding “186”/“184” to the
head of the phone number.
: Add the number registered in advance to the head of the
phone number: Enter a phone number/[ ]/[Select
prefix]/select the registered name of the number
･ You can add the number registered in [Prefix settings]
(>P. 38 “Call settings/Other”).
1 In the home screen, [ ]/[Dial]
2 Enter a phone number/[ ]/[Add 2-sec
pause]
3 Enter a number to send/[
■ Adding wait
After making a call to a main phone number, the handset
automatically waits and then a screen asking whether to send an
additional number is displayed. Touch [YES] to send an additional
number.
1 In the home screen, [ ]/[Dial]
2 Enter a phone number/[ ]/[Add wait]
3 Enter a number to send/[ ]
4 [YES] during the call
Video call
1 Call
Make a call. Also, if there are outgoing call history items,
touch it to enter the latest one when the phone number
has not been entered.
2 Favorites
Display the contacts set as favorites.
3 Delete
Delete an entered number.
Touch and hold it to delete all the entered numbers.
4 Register
5 Dial
Display the dial screen.
6 Outgoing/Incoming call history
7 Phonebook
Display the phonebook.
3[
By using video call, you and the other party can talk on the
handset while seeing each other's image. Also, you can switch
between voice call and video call while talking on the handset.
Call charges and packet communication charges are incurred
when making a video call. In addition, packet communication
charges are incurred also when receiving a video call.
Quality of image may differ depending on the usage
environment because suitable communication levels are
applied according to the usage condition.
If you cannot switch to a video call during a voice call,
[Switching to video call failed] is displayed and the voice call
continues.
Be careful not to cover the speaker section during a video call.
The other party's voice may not be heard well.
: To make a video call: [
]/[Video call]
While using video call in the background, your image is not sent
to the other party.
4 [END CALL] to end the call
As for image displayed during a video call, since processes for
displaying image may differ depending on the model to use,
ranges of your image displayed on the handset may differ from
those displayed on the other party's device.
If you talk on the handset with your hair put between the earpiece
and your ear, the proximity sensor may not work properly. The
screen may be kept turned on and the call may be interrupted
when the screen is touched accidentally.
VoLTE
VoLTE enables you to use call and video call with high quality.
When you use VoLTE, the handset and the other party's device
need to satisfy the following conditions.
They are VoLTE compatible models
They are inside the VoLTE available area
Preferred network type is set to [4G/3G/GSM(Auto)]
(>P. 86 “Preferred network type”)
Call mode setting is set to ON (>P. 00 “Cellular networks”)
35
SH-02J_E_04.fm
[35/42]
Call
SH-02J_E.book
36 ページ
２０１６年９月２日
金曜日
午後１２時１１分
Answering a call
Emergency call
Emergency calls
※ If you use Suguden, you can answer a call just by putting the
handset on your ear when a call is received (>P. 39 “Suguden
setting”).
Phone number
Police
110
Fire and ambulance
119
Marine emergency
118
1 When a call is received, the ringtone sounds
and the incoming lamp flashes
The handset supports “Emergency call location notification”.
When you make a call to an emergency number such as 110,
119 and 118, the information of your location (location
information) is automatically notified to the agency that has
received the emergency call (e.g. the police station). Depending
on your location and the reception status of the signal, the
agency that has received the emergency call may not be able to
confirm the exact location.
If you are not sending your caller ID by calling with “184” added
or other means, your location information and phone number
are not notified. However, if the agency that has received the
emergency call considers the exact location information
measured via GPS and phone number necessary for important
purposes, such as life saving, the agency may retrieve them
regardless of your settings.
In addition, the area/timing to introduce “Emergency call
location notification” depends on the state of preparation in
each agency that receives emergency calls.
Incoming lamp
2 Answer the call
: Operate after touching [
Incoming voice call screen
In Japan, you cannot make a call to the emergency number
(110, 119 or 118) when a docomo nano UIM card is not
inserted, while the PIN code is locked, from the PUK (PIN
Unlock Key) entry screen.
Incoming video call screen
1 Reject
Reject the incoming call.
2 Reject call with SMS
Reject the incoming call and send a selected SMS
message to the other party.
3 Accept
Answer the call.
4 Accept voice
Answer the call using voice call.
5 Accept video
Answer the call using video call.
When calling 110, 119 and 118 from your handset, the police or
fire stations may return your call for verification purposes. State
that you are calling from a mobile phone, and give your phone
number and exact present location.
Remain stationary to ensure that the call is not disconnected
while you are on the line, and keep the handset turned on to
receive calls for approximately 10 minutes afterwards.
Depending on the region, calls to the police or fire station of the
local area may not be made.
3 [END CALL] to end the call
When you make a call to the emergency number (110, 119 or
118) while Reject call setting is set, items of Reject call setting
are set to [OFF].
■ Answering a call while display is turned on
When a call is received while a screen other than lock screen of the
touch panel is displayed, the incoming notification is displayed. You
can answer the call by using the notification.
Emergency call may not be available in some networks.
You cannot make a video call to the emergency number (110,
119 or 118).
1 When a call is received, the incoming
International call (WORLD CALL)
notification is displayed at the top of the screen
2 [ACCEPT]
WORLD CALL is an international calling service available from
DOCOMO devices in Japan.
The caller ID may not be notified or displayed correctly
depending on overseas network operators. In this case, making
a call with incoming call history is not available.
: Touch the incoming notification to display incoming voice
call/video call screen.
■ Answering a video call without sending your own
image
[Calling Method]
When calling to a land-line phone: 010/country code/area
code (city code)/the other party's phone number/[ ]
When calling to a mobile phone: 010/country code/the other
party's mobile phone number/[ ]
･ As for the other parties' mobile phone numbers and area codes
(city codes) that begin with “0”, omit the first “0” when entering
(except some countries or regions such as Italy).
･ Alternatively, enter “009130-010” as usual or “+” instead of
“010”.
1 When a video call is received, the ringtone
sounds and the incoming lamp flashes
2 In the incoming video call screen, [
]/
[Camera OFF response]
36
SH-02J_E_04.fm
[36/42]
].
Call
SH-02J_E.book
42 ページ
２０１６年９月２日
金曜日
午後１２時１１分
2 Use groups
■ Sharing My profile
You can send your phone number to another device or save it in
cloud computing.
1 In the home screen, select “ドコモクラウド”
(docomo cloud) folder/[docomo
phonebook]/[My profile]
2 [ ]/[Share]
3 Select a sharing tool
: Follow the instructions on the screen and operate after this
step.
1 Account
2 Group icon
3 Group name
4 Add group
Add a group.
5 Groups
6 Number of contacts registered in the group
7 Sort
■ Editing My profile
1 In the home screen, select “ドコモクラウド”
(docomo cloud) folder/[docomo
phonebook]/[My profile]
2 [Edit]
3 Set each item/[Save]
You cannot sort groups other than ones created with a docomo
account.
Backing up/Restoring phonebook
■ Grouping/Ungrouping contacts
You can back up/restore the phonebook by using docomo
backup.
For details on backing up/restoring phonebook by using docomo
backup >P. 64 “Backing up to/Restoring from a microSD Card”
1 In the home screen, select “ドコモクラウド”
(docomo cloud) folder/[docomo
phonebook]/[Group]
2 Select a group
3 [Delete member]/[Add member]
4 Select names/[OK]/[OK]
The group function is available on contacts created with a
docomo account, Google account, etc.
My profile
You can display your phone number registered on the docomo
nano UIM card. You can also register your name, mail
addresses, etc.
1 In the home screen, select “ドコモクラウド”
(docomo cloud) folder/[docomo
phonebook]/[My profile]
2 Check/Use the profile
1 Image
2 Registered content
3 Edit
42
SH-02J_E_04.fm
[42/42]
Call
SH-02J_E.book
43 ページ
２０１６年９月２日
金曜日
午後１２時１１分
1 Image
Displayed if an image of the other party is registered in
the phonebook. Touch to display the registered content of
the phonebook. If the person is not registered in the
phonebook, you can register the person in the phonebook
after touching it.
2 Destination/Sender
3 Number of threads included unread messages
4 Newly compose message
5 Message search
6 Number of messages in thread
7 Date and time of the message exchange
Mail/Web Browser
You can send and receive messages using docomo mail, SMS,
Gmail, etc., and display websites using Chrome.
docomo mail
You can send and receive mails using mail address of
DOCOMO (@docomo.ne.jp). Data can be easily transferred
when you have changed models or restored when you have
lost the handset since sent and received mails are saved on
the docomo mail server. Also, you can send, receive and view
mails using the same mail address from multiple devices such
as a tablet, PC browser, etc. if you use d ACCOUNT.
For details on docomo mail, refer to the DOCOMO website.
(https://www.nttdocomo.co.jp/service/docomo_mail/)(in Japanese
only)
1 In the home screen, [
3 Check the message
: Follow the instructions on the screen and operate after this
step.
SMS
You can send and receive text messages with mobile phone
numbers serving as destinations.
※For details on the number of characters which can be sent and
received etc., refer to “Short Message Service (SMS)” on the
DOCOMO website.
(https://www.nttdocomo.co.jp/service/sms/)(in Japanese only)
You can also exchange messages with those who use network of
overseas network operators. Refer to the DOCOMO website for
information on countries where this service is available and
available overseas network operators.
1 In the home screen, [ ]/[Messaging]
2[ ]
3 Enter the destination and message/[
1 Destination/Sender
2 Phone call
3 Message
4 Date and time of the message exchange
Replying message
1 In the home screen, [
2 Select a thread
3 Enter the message/[
Forwarding message
In the home screen, [ ]/[Settings]/[Apps]/[ ]/[Default
Apps]/[SMS app]/[Hangouts] to switch Default SMS app to
Hangouts.
1 In the home screen, [ ]/[Messaging]
2 Select a thread
3 Touch and hold a message/[Forward]
4 Enter the destination and message/[
If destinations are devices owned by those who use network of
overseas network operators, enter “+”, the country code and the
recipient's mobile phone number. If the phone number begins
with “0”, omit the first “0”. Alternatively, enter “010”, the country
code and the phone number.
1 In the home screen, [ ]/[Messaging]
2 Select a thread
3 Touch and hold a message/[Delete]/
SMS cannot be sent when “186” or “184” is added.
Displaying message
[DELETE]
]/[Messaging]
Deleting thread
: Messages are grouped into threads according to their
destinations/senders and displayed.
1 In the home screen, [
: To delete all threads: [
]/[Messaging]
]/[Delete all threads]/[DELETE]
2 Touch and hold a thread/[
43
SH-02J_E_05.fm
[43/48]
Deleting message
Half-width katakana and special symbols in SMS messages
may not appear correctly for recipient.
1 In the home screen, [
2 Select a thread
]/[Messaging]
]/[DELETE]
Mail/Web Browser
SH-02J_E.book
44 ページ
２０１６年９月２日
金曜日
午後１２時１１分
Depending on the signal status etc., characters may not appear
correctly on the screen of the other party's device.
Setting Messaging
1 In the home screen, [
2 [ ]/[Settings]
3 Select an item
]/[Messaging]
Attaching file
Files of up to approximately 5 MB can be attached. There are
no limits to the number of files to be attached.
Depending on the receiving side device, files may not be
received or correctly displayed/played. Also, the quality of
videos may deteriorate or videos may be converted to
continuous still pictures.
SMS Enabled: Set an app to send and receive SMSs with.
Delete old messages: When the number of saved messages
reaches its limit, messages are automatically deleted from
the oldest one.
Text message limit: Set the number of messages to be saved
by thread.
Delivery reports: Notify you that sent messages have been
received every time a message is received.
Manage SIM card messages: Manage messages saved on
the docomo nano UIM card.
Notifications: Notify you that messages have been received
on the status bar.
Sound: Set the ringtone to be rung when a message is
received.
Vibrate: Set whether to activate the vibrator when a message
is received.
Displaying mail
The screen may appear different depending on the account to
use.
1 In the home screen, [
2 Select a mail
]/[Email]
[Delivery reports]
When you send a message to mobile phones of other carriers,
the notification for confirming that it has been received may not
be sent to you.
Email
1 Box name/Folder name being displayed
Touch [ ] to switch or set folders/accounts.
2 Mails
The characters of sender or subject are displayed in thin
characters when a mail is read.
Touch images to checkmark the mails and you can set
them to be deleted/unread/read etc. collectively.
3 Mail search
4 Star icon
Use it as a mark indicating that the mail is special or
supposed to be dealt with later.
You can check starred mails in the Starred folder.
5 Newly compose mail
You can send and receive mails by setting up a mail account
provided by a service provider.
Set up an account in advance (>P. 25 “Setting up mail
account”).
1 In the home screen, [
2[ ]
3 Compose a mail
]/[Email]
3 Check the mail
1 Account
If you set up multiple accounts, you can switch accounts.
2 Destination
When you enter part of a mail address or a name
registered in the phonebook, destination candidates are
displayed.
3 Subject
4 Message
5 Add destinations
Touch it to add Cc or Bcc.
6 File attachment
4[
1 Subject
2 Sender/Destination
Displayed if an image of the other party is registered in
the phonebook. Touch to display the registered content of
the phonebook. If the person is not registered in the
phonebook, you can register the person in the phonebook
after touching it.
3 Date and time of reception
Touch to display/hide the details of sender, destination or
date and time of reception.
4 Message
5 Attached file
Some receiving side models may not be able to receive the
subject completely.
Mails sent from a Gmail account are treated as ones from a PC.
When receiving side models set PC-mail rejection, mails cannot
be sent.
Mails that could not be sent for any reason will be saved in
Unsent folder as unsent mails.
44
SH-02J_E_05.fm
[44/48]
Mail/Web Browser
SH-02J_E.book
45 ページ
２０１６年９月２日
金曜日
午後１２時１１分
6 Star icon
Use it as a mark indicating that the mail is special or
supposed to be dealt with later.
You can check starred mails in the Starred folder.
7 Menu of each mail
Touch to reply to all, forward or print by mail.
8 Reply
9 Delete
a Unread
Gmail
You can use a mail service provided by Google or Email
provided by general service providers.
If you have not set up a Google account or Email account, follow
the instructions on the screen and set.
1 In the home screen, select “Google” folder/
[Gmail]
2[ ]
3 Compose a mail
Replying/Forwarding mail
1 In the home screen, [
2 Select a mail
3[ ]
]/[Email]
: To reply to all: [ ] of each mail/[Reply all]
: To forward: [ ] of each mail/[Forward]
4 Compose a mail
1 Account
If you set up multiple accounts, you can switch accounts.
2 Destination
Permit the use of phonebook by touching [Allow contacts
suggestions] to display destination candidates when you
enter part of a mail address or a name registered in the
phonebook.
3 Subject
4 Message
5 Add destinations
Touch to add Cc or Bcc.
6 File attachment
1 Reply type
Touch to switch Reply/Reply all/Forward.
2 Destination
3 Message
4 Quote text
Touch to display/hide the mail of the sender.
You cannot operate it when forwarding mails.
5 Mail of sender
6 Subject
7 Respond inline
Enter the mail of the sender in the message.
5[
4[
Displaying mail
1 In the home screen, select “Google” folder/
[Gmail]
2 Select a thread
: In Gmail, mails are grouped into threads by reply and
displayed. If new mails are replied ones of an existing mail,
they are grouped into the same thread. A new thread is
created for newly composed mails or mails whose subjects
have been changed.
Deleting mail
1 In the home screen, [
]/[Email]
: To delete selected mails: Touch the images of mails/
[ ]/[OK]
2 Select a mail
3 [ ]/[OK]
Setting Email
1 In the home screen, [
2 [ ]/[Settings]
3 Select an item
]/[Email]
1 Box name/Label name being displayed
Touch [ ] to switch or set displaying types/accounts.
2 Threads
The characters of sender or subject are displayed in thin
characters when all mails in thread are read.
Touch images to checkmark the threads and you can set
them to be archived/deleted/unread/read etc. collectively.
3 Mail search
4 Number of mails in thread
General settings: Make settings for the whole Email.
Add account: Add account.
Privacy policy: Check the privacy policy.
: Select an account to make settings for the details on the
account such as Signature and Email notifications.
45
SH-02J_E_05.fm
[45/48]
Mail/Web Browser
SH-02J_E.book
81 ページ
２０１６年９月２日
金曜日
午後１２時１１分
■ Setting Bluetooth
Using Bluetooth function
Set after setting [Bluetooth] to On.
To register/connect a Bluetooth device, the Bluetooth passkey
may need to be entered. Before starting the registration, decide
one- to sixteen-digit number. Enter the same number on the
handset and the other party's Bluetooth device.
Set the other party's Bluetooth device to the registration stand-by
status in advance.
1 In the home screen, [
1 In the Bluetooth screen, [
2 Select an item
 Refresh: Search for the Bluetooth device.
 Rename this device: Change the handset's name.
 Qualcomm® aptX™: Set whether to use Qualcomm aptX
audio.
 Show received files: Display the history of data received via
Bluetooth connection.
]/[Settings]/
[Bluetooth]
2 Set to On
3 Select a Bluetooth device/[PAIR]
[Qualcomm® aptX™]
When you enable [aptX], sounds may not be output depending
on the Bluetooth device. In this case, disable [aptX].
: The confirmation screen for connection may be displayed.
: Entering the Bluetooth passkey may be necessary
depending on the other party's Bluetooth device. Also, some
Bluetooth devices may start connection after completing
registration.
: To search for Bluetooth devices: [ ]/[Refresh]
: Touch [ ] of a paired Bluetooth device to set name and
intended purpose of the other party's Bluetooth device.
Sending and receiving by Bluetooth
■ Sending data
Example: Still picture
1 In the home screen, [
]/[Contents
Manager]/[Photo]
You can connect up to seven Bluetooth devices at the same
time. Bluetooth devices may not work properly or the number of
Bluetooth devices which can be connected at the same time
may differ depending on the profile.
2 Touch and hold a still picture/[Share]/
[Bluetooth]
: Set the receiver's Bluetooth device to the reception stand-by
status.
If you fail to connect a Bluetooth device, connection may
become available after re-registering it.
3 Select a Bluetooth device to connect to
When [Bluetooth] is set to On, the handset is set to receive
registration requests/connection requests from other Bluetooth
devices. Make the setting for displaying the handset's
information on other Bluetooth devices in advance to allow the
handset to be searched for by other Bluetooth devices.
■ Receiving data
1 Data is sent from the sender's Bluetooth device
2 Drag the status bar down/select the incoming
While in connection stand-by, even if a connection request from
a Bluetooth device is received, connection may not be made
depending on the signal status etc.
notification/[ACCEPT]
3 Drag the status bar down/select the received
data
For details on the operations of the other party's Bluetooth
device, refer to the manuals of the Bluetooth device to be used.
Receiving all data may not be available depending on the data
type.
■ When receiving registration request from Bluetooth
device or connection request from unregistered
Bluetooth device
When available space in the save destination becomes
insufficient while receiving data, the data being received to that
point are saved and receiving ends.
1 Registration request/Connection request from
Bluetooth device
2 Drag the status bar down/[Pairing request]/
[PAIR]
: When the confirmation screen about the settings on pairing
appears, select [PAIR].
: Entering the Bluetooth passkey may be necessary
depending on the other party's Bluetooth device.
: The confirmation screen for connection may be displayed.
■ Unregistering Bluetooth device
1 In the Bluetooth screen, [
] of the Bluetooth
device to unregister/[FORGET]
■ Disconnecting Bluetooth device
1 In the Bluetooth screen, select the Bluetooth
device to disconnect/[OK]
81
SH-02J_E_09.fm
[81/82]
Data Communication
SH-02J_E_12.fm
96 ページ
２０１６年９月６日
火曜日
Specific Absorption Rate (SAR) of
Mobile Phones
European RF Exposure Information
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines were
developed by the independent scientific organization ICNIRP and
include safety margins designed to assure the protection of all
persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is
2 W/kg and the highest SAR value for this device when tested at
the ear is 0.549 W/kg* and when worn on the body is 1.300 W/kg*.
For body-worn operation, this mobile device has been tested and
meets the RF exposure guidelines when used with an accessory
containing no metal and positioning the handset a minimum of
5 mm from the body. Use of other accessories may not ensure
compliance with RF exposure guidelines.
As SAR is measured utilizing the devices highest transmitting
power the actual SAR of this device while operating is typically
below that indicated above. This is due to automatic changes to the
power level of the device to ensure it only uses the minimum level
required to reach the network.
This model SH-02J mobile phone complies with Japanese
technical regulations and international guidelines regarding
exposure to radio waves.
This mobile phone was designed in observance of Japanese
technical regulations regarding exposure to radio waves (*1) and
limits to exposure to radio waves recommended by a set of
equivalent international guidelines. This set of international
guidelines was set out by the International Commission on
Non-Ionizing Radiation Protection (ICNIRP), which is in
collaboration with the World Health Organization (WHO), and the
permissible limits include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health
condition.
The technical regulations and international guidelines set out limits
for radio waves as the Specific Absorption Rate, or SAR, which is
the value of absorbed energy in any 10 grams of tissue over a
6-minute period. The SAR limit for mobile phones is 2.0 W/kg. The
highest SAR value for this mobile phone when tested for use near
the head is 0.504 W/kg (*2) and when worn on the body is
0.511 W/kg (*3). There may be slight differences between the SAR
levels for each product, but they all satisfy the limit.
The actual SAR of this mobile phone while operating can be well
below that indicated above. This is due to automatic changes to the
power level of the device to ensure it only uses the minimum
required to reach the network. Therefore in general, the closer you
are to a base station, the lower the power output of the device.
This mobile phone can be used in positions other than against your
head. Please keep the mobile phone farther than 1.5 cm away from
your body by using such as a carrying case or a wearable
accessory without including any metals. This mobile phone satisfies
the technical regulations and international guidelines.
The World Health Organization has stated that “a large number of
studies have been performed over the last two decades to assess
whether mobile phones pose a potential health risk. To date, no
adverse health effects have been established as being caused by
mobile phone use.”
Please refer to the WHO website if you would like more detailed
information.
(http://www.who.int/docstore/peh-emf/publications/facts_press/
fact_english.htm)
Please refer to the websites listed below if you would like more
detailed information regarding SAR.
* The tests are carried out in accordance with international
guidelines for testing.
Declaration of Conformity
Hereby, SHARP CORPORATION declares that the radio equipment type
SH-02J is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
(http://www.sharp.co.jp/k-tai/)(in Japanese only)
Manufacturer’s Address:
Sharp Corporation, IoT Communication BU
2-13-1 Iida Hachihonmatsu
Higashihiroshima-City
Hiroshima,
739-0192
Japan
Description of accessories
Ministry of Internal Affairs and Communications Website:
(http://www.tele.soumu.go.jp/e/sys/ele/index.htm)
Association of Radio Industries and Businesses Website:
(http://www.arib-emf.org/01denpa/denpa02-02.html)(in Japanese
only)
NTT DOCOMO, INC. Website:
(https://www.nttdocomo.co.jp/english/product/sar/)
SHARP Corporation Website:
(http://k-tai.sharp.co.jp/support/sar/)(in Japanese only)
*1 Technical regulations are defined by the Ministerial Ordinance
Related to Radio Law (Article 14-2 of Radio Equipment
Regulations).
*2 Including other radio systems that can be simultaneously used
with LTE/FOMA.
*3 Including other radio systems that can be simultaneously used
with LTE/FOMA.
Headset, Handsfree
Micro USB cable
Φ3.5 audio jack, Bluetoorh.
For charging, peripherals, etc.
microSD Card
microSD/microSDHC/microSDXC
nano UIM card
DOCOMO SIM card/non-DOCOMO SIM cards
non-DOCOMO SIM cards can be used after
SIM-unlocking the handset.
Frequency range of supported bands in EU
96
SH-02J_E_12.fm
[96/99]
午後４時３６分
GSM 900
Tx 880.2 to 914.8 MHz
Rx 925.2 to 959.8 MHz
DCS 1800
Tx 1710.2 to 1784.8 MHz
Rx 1805.2 to 1879.8 MHz
WCDMA FDD I
Tx 1922.4 to 1977.6 MHz
Rx 2112.4 to 2167.6 MHz
LTE Band 1
Tx 1922.5 to 1977.5 MHz
Rx 2112.5 to 2167.5 MHz
LTE Band 3
Tx 1710.7 to 1784.3 MHz
Rx 1805.7 to 1879.3 MHz
Bluetooth
Tx 2402 to 2480 MHz
Rx 2402 to 2480 MHz
WLAN 2.4 GHz
Tx/Rx 2412 to 2472 MHz (Bandwidth: 20 MHz only)
NFC
Tx/Rx 13.56 MHz
GPS
Rx L1 (1575.42 MHz)
Appendix/Index
SH-02J_E_12.fm
97 ページ
２０１６年９月６日
火曜日
The tests are performed in positions and locations (e.g., at the ear
and worn on the body) as required by the FCC for each model. The
highest SAR value for this model handset when tested for use at
the ear is 0.76 W/kg and when worn on the body, as described in
this user guide, is 0.82 W/kg.
For body worn operation, this phone has been tested and meets the
FCC RF exposure guidelines. Please use an accessory designated
for this product or an accessory which contains no metal and which
positions the handset a minimum of 1.5 cm from the body.
The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be
avoided.
The FCC has granted an Equipment Authorization for this model
handset with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model handset is on file with the FCC and can be found under the
Display Grant section of (http://transition.fcc.gov/oet/ea/fccid/)after
searching on FCC ID APYHRO00242.
Additional information on Specific Absorption Rates (SAR) can be
found on the FCC website at (http://www.fcc.gov/encyclopedia/
radio-frequency-safety).
Maximum transmit power
GSM 900
+33 dBm (Power Class4)
DCS 1800
+30 dBm (Power Class1)
WCDMA FDD I
+24 dBm (Power Class3)
LTE Band 1
+23 dBm (Power Class3)
LTE Band 3
+23 dBm (Power Class3)
Bluetooth
+4.3 dBm (Power Class1)
WLAN 2.4 GHz
+11.0 dBm
NFC
-10 dBμA/m at 10 m
午後４時２分
Volume level caution
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
Earphone Signal Level
The maximum output voltage for the music player function,
measured in accordance with EN 50332-2, is 121.0 mV.
FCC Notice
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment.
FCC ID Location
The device is electronically labeled and the FCC ID can be
displayed via the About phone & the Authentication under the
Settings menu.
Information to User
This equipment has been tested and found to comply with the limits
of a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation; if this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient/relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for
help.
FCC RF Exposure Information
Your handset is a radio transmitter and receiver.
It is designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6 W/kg.
97
SH-02J_E_12.fm
[97/99]
Appendix/Index
SH-02J_E.book
98 ページ
２０１６年９月２日
金曜日
午後１２時１１分
FeliCa is a contactless IC card technology developed by Sony
Corporation. FeliCa is a registered trademark of Sony
Corporation.
The Bluetooth word mark and logos are owned by the Bluetooth
SIG, INC. and any use of such marks by NTT DOCOMO, INC. is
under license. Other trademarks and trade names are those of
their respective owners.
Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
Wi-Fi Direct™, Miracast™, Wi-Fi Protected Setup™ and Wi-Fi
Protected Setup logo are trademarks of Wi-Fi Alliance®.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
Facebook and Facebook logo are trademarks or registered
trademarks of Facebook, Inc.
Instagram is a trademark of Instagram, LLC in the United States
and elsewhere.
Twitter and Twitter logo are trademarks or registered trademarks
of Twitter, Inc.
This product includes software developed by the OpenSSL
Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)
This product includes cryptographic software written by Eric
Young (eay@cryptsoft.com)
iWnn of OMRON SOFTWARE Co., Ltd. is used for conversion
methods for Japanese language, and for phrase prediction
methods for English.
iWnn © OMRON SOFTWARE Co., Ltd. 2008-2016 All Rights
Reserved.
iWnn IME © OMRON SOFTWARE Co., Ltd. 2009-2016 All
Rights Reserved.
Qualcomm aptX is a product of Qualcomm Technologies
International, Ltd.
Qualcomm is a trademark of Qualcomm Incorporated, registered
in the United States and other countries, used with permission.
aptX is a trademark of Qualcomm Technologies International,
Ltd., registered in the United States and other countries, used
with permission.
VoiceText of HOYA Service Corporation is used for speech
synthesis. VoiceText is a registered trademark of Voiceware
co.,ltd.
Google, Google logo, Android, Google Play, Google Play logo,
Gmail, Gmail logo, Google Calendar™, Google Calendar logo,
Google Maps™, Google Maps logo, Google Chrome™, Google
Chrome logo, Google Voice Search™, Google Voice Search
logo, YouTube, YouTube logo, Google Drive, Google Drive logo,
Google Now, Google Photos™ and Hangouts are trademarks of
Google Inc.
“AQUOS”, “EVER”, “Feel Home”, “VeilView”, “Bright Keep”,
“NightCatch/ナイトキャッチ”, “フレーミングアドバイザー/
FramingAdviser”, “エモパー/emopa”, “エモパーメモ”, “エモパー
ヘルスケア”, “エモパーク/emopark”, “エスショイン/S-Shoin”, “ク
リップナウ/Clip Now” “リラックスビュー/Relax View” and
“AQUOS” logo are trademarks or registered trademarks of Sharp
Corporation.
All other company names and product names are trademarks or
registered trademarks of the respective companies.
Export Administration
Regulations
The Japan Export Administration Regulations (“Foreign
Exchange and Foreign Trade Act” and its related laws) may be
applied to this product and its accessories under certain
conditions. The Export Administration Regulations may also
be applied. To export or reexport the handset and its
accessories, conduct all legally required procedures at your
own risk and expense. For details on the procedures, contact
the Ministry of Economy, Trade and Industry or the US
Department of Commerce.
Intellectual Property Right
Copyrights and rights of portrait
Data with third party copyrights such as text, images, music and
software that is downloaded via Internet websites, acquired by
TV, video, etc. or shot by the handset cannot be duplicated,
altered or publicly transmitted without rightful party's consent.
Only duplicating, quoting, etc. for personal use are permitted
under the Copyright Act.
Even if for personal use, filming and recording may be prohibited
for stage performances, shows, exhibitions, etc.
Also, shooting another's image or posting another's image on
Internet websites without his/her consent may constitute a
violation of one's right to his/her image.
Registered trademarks and trademarks
“FOMA”, “dメニュー”, “dmenu”, “dmarket”, “おサイフケータイ”,
“ToruCa”, “mopera U”, “i-appli”, “i-mode”, “iD”, “WORLD WING”,
“WORLD CALL”, “ｉコンシェル”, “sp-mode”, “Xi”, “eトリセツ”,
“しゃべってコンシェル”, “フォトコレクション”, “LIVE UX”, the
“ToruCa” logo, the “iD” logo, the “i-concier” logo, the
“Osaifu-Keitai” logo, the “Area Mail” logo, the “docomo Anshin
Scan” logo, the “Media Player” logo, the “docomo voicemail”
logo, the “docomo phonebook” logo, the “dmenu” logo, the
“Anshin Enkaku Support” logo, the “Shabette-Concier” logo, the
“IC Tag/Barcode Reader” logo, the “docomo backup” logo, the
“My magazine” logo, the “d book MyShelf” logo, the “データ保管
BOX” logo, the “Hanashite Hon'yaku” logo, the “dmarket” logo,
the “フォトコレクション” logo and the “d ACCOUNT” logo are
trademarks or registered trademarks of NTT DOCOMO, INC.
“Catch Phone (Call waiting service)” is a registered trademark of
Nippon Telegraph and Telephone Corporation.
Microsoft®, Windows®, Windows Media® and Windows Vista®
are trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Oracle and Java are registered trademarks of Oracle and/or its
affiliates.
Other names may be trademarks of their respective owners.
QR code is a registered trademark of Denso Wave Inc.
microSD Logo, microSDHC Logo and microSDXC Logo are
trademarks of SD-3C, LLC.
The handset features LCFONT, developed by Sharp
Corporation, to make the LCD easier to view and read. LCフォン
ト/LCFONT and
are registered trademarks of Sharp
Corporation.
™
OBEX is a trademark of Infrared Data Association®.
# is a registered trademark of FeliCa Networks, Inc.
98
SH-02J_E_12.fm
[98/99]
Appendix/Index
SH-02J_E.book
106 ページ
２０１６年９月２日
金曜日
Using mobile phone with your manners!
Please be considerate of those around you when using the handset.
Turn off your handset in the following places
 When in an area where use is prohibited
When you are on an airplane or in a hospital, follow the instructions given by
the respective airlines or medical facilities. Turn off the handset in areas
where the use of mobile phones is prohibited.
Set Public Mode in the following places
 While driving
Using the handset in hand while driving is regarded as a punishable act.
However, some cases such as when rescuing sick and injured people or
maintaining public safety are exempted.
 When in public places such as theaters, movie theaters or
museums
Using the handset in public places where you should be quiet results in
disturbing others.
Be aware of the place to use a mobile phone and the
volume of your voice and ringtone
 Be aware of the volume of your voice when using the handset in
quiet places such as restaurant and hotel lobby.
 Use in places where you do not block a passage in the town.
Be considerate of the privacy of the individuals around
you
 Please be considerate of the privacy of individuals around you
when taking and sending photos using camera-equipped device.
Do not use your smartphone while walking
 Using your smartphone while walking on a platform of a train
station, street, etc. may narrow your vision and cause a collision.
 Use your smartphone in a safe place after you stop walking.
These functions ensure manners in public
The handset has convenient functions such as setting not to
answer a call and setting to mute sound of the handset.
Manner mode (>P. 27 “Manner mode”)
Mutes sound of the handset.
※ However, the manner mode cannot mute camera shutter sound.
Public Mode (Phone OFF) (>P. 38 “Network service”)
When a call is received, a message stating that you are in a place that does
not allow the use of mobile phone is played and the call is automatically
disconnected.
Phone vibration (>P. 65 “Sound & notification”)
Notifies you of incoming call with vibration.
Answering memo (>P. 38 “Voice/Answering memo”)
Records callers' messages when you cannot answer the call.
※ Additionally, optional services such as Voice Mail Service
(>P. 38 “Network service”) and Call Forwarding Service
(>P. 38 “Network service”) are available.
We collect your unnecessary mobile phones and
other devices irrespective of carrier. Bring them to a
docomo Shop near you.
※ Intended devices: Mobile phone, PHS, battery
pack, charger and desktop holder (irrespective of
carrier)
SH-02J_E_14.fm
[106/106]
~~~
午後１２時１１分
Carrying out various procedures, checking
subscription, etc. online
From the handset dメニュー (dmenu)/My docomo (お客様サ
ポート) (My docomo (support))/ドコモオンライン手続き
(docomo online procedure) (in Japanese only)
From a PC My docomo (https://www.nttdocomo.co.jp/mydocomo/)
/select an item on “ドコモオンライン手続き” (docomo online
procedure) (in Japanese only)
※ You may not be able to access some website services due to system
maintenance, the content of your subscription, etc.
※ “Network security code” or “ID/Password” is required to use “ドコモオ
ンライン手続き” (docomo online procedure).

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2016:09:06 16:52:24+09:00
Modify Date                     : 2016:09:06 20:11:41+09:00
Has XFA                         : No
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2016:09:06 20:11:41+09:00
Format                          : application/pdf
Document ID                     : uuid:c6117207-32f6-4ad7-90fd-11559dcc8c7a
Instance ID                     : uuid:71d9da66-6ea4-4ff6-be03-923ea6f5ab5c
Page Mode                       : UseNone
Page Count                      : 25

EXIF Metadata provided by EXIF.tools