Sharp NAR0057 Tri-Band Mobile Cellular Phone User Manual 040518 tm150fcc e link

Download:
Mirror Download [FCC.gov]
Document ID	430475
Application ID	kbXJVCb6Gt9ilpMHcVR66g==
Document Description	Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.32kB (79029 bits)
Date Submitted	2004-06-10 00:00:00
Date Available	2004-06-09 00:00:00
Creation Date	2004-05-19 10:49:17
Producing Software	Acrobat Distiller 3.0.2J (Power Macintosh 版)
Document Lastmod	0000-00-00 00:00:00
Document Title	040518_tm150fcc_e_link.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	suzukikenji

Basic Handset Operations
This section describes basic phone call functions.
Confirm that the handset is on.
Making a Call
Confirm the number and press D.
Start talking when the connection is established.
If you enter a wrong number
Press A [Clear] to delete one digit. Press A [Clear] and
hold for approximately 2 seconds to delete all digits and
return to standby mode.
Ending a Call
Press F to end the call.
The estimated total time for the call appears.
The handset rings and the Indicator LED flashes
for an incoming call.
Press D, B or C [Answer].
The call is connected and “
” appears.
When the Any Key Answer Function
is Activated
To answer a call, press any key except F or A. For
information on “Any Key Answer,” refer to “Setting Any
Key Answer” on page 15-126.
When the hands free EARphone &
MIC is connected
To answer a call, press and hold the button of the hands
free EARphone & MIC for approximately 2 seconds.
Basic Handset Operations
When entering a number, start with the area code.
Answering a Call
Basic Handset Operations
Flip open the handset and enter a phone number
with the keypad.
When the Hands free EARphone & MIC is
connected to the handset and the “Any Key
Answer” function is set to “On” you can, answer
calls by pressing the V or W key.
When the handset is connected to Hands free
car kit, and “Automatic answer” is set to “On”, the
handset automatically connects the call after the
specified time and you can talk to the caller. For
information on “Automatic answer”, refer to
“Setting the Automatic Answer” on page 15-127.
If your subscription includes the Calling Line
Identification (CLI) service, the caller’s number
appears on the screen. If the caller’s name and
number are stored in the “Contacts list,” the caller’s
name and phone number appear on the screen.
If the number is a restricted number, “withheld”
appears.
When receiving a call from a person whose picture
is registered in the “Contacts list,” the receiving
display and the picture appear alternately. For
more information on the “Contacts list” refer to
“Using the Contacts List” on page 9-48.
Rejecting an Incoming Call
Flipping close the handset also ends a call.
You can reject a call you do not wish to answer.
Press F while the handset is ringing.
You can also reject an incoming call by flipping
closed the handset.
6-27
6-28
Redialling
The handset keeps a record of the phone numbers of the
10 most recent calls dialled, missed, or received. You can
retrieve these phone numbers to make calls.
Press D while the handset is in standby mode.
Press c or d to highlight a category between
“Dialled numbers,” “Received calls,” and “New
calls.”
Press a or b to highlight the number you wish
to call.
Press D to redial the call.
Setting Automatic Redialling
This function makes the handset redial automatically
when the first redial attempt is unsuccessful. For
information on “Auto redial,” refer to “Activating Auto
Redial” on page 15-130.
Useful Functions
The second party is put on hold and you can talk to
the third party.
Speed Dialling
To dial a number using the speed dial, press and
hold for approximately 2 seconds any of the digit
keys. (H to O and Q. G cannot be used as
the speed dial because it is already assigned to
the “Voice mail.”)
The phone number stored in the “Speed dial list” is
dialled.
Call Waiting
This service enables you to talk to a third party while you
are in the middle of another call. After activating this
service, a beep tone notifies you of the second call.
To activate this service, refer to “Activating the Call
Waiting Service” on page 15-128.
During a call, press C [Options].
The “Options” menu appears.
During a call, press C [Options].
Press a or b to highlight “Swap calls” and
press B.
Press a or b to highlight “Text message” and
press B.
Press a or b to highlight one of following
options.
Press C [Options].
The “Options” menu appears.
The “Options” menu appears.
You can switch between the two calls.
Accessing the Text message Menu
During a Call
The “Options” screen appears.
Press C [Options].
Press a or b to highlight “Release call” and
press B.
You are ending the current call to return to the held
call.
The call waiting service may not be available
on all networks. Contact your service provider
for more information.
If you do not wish to answer the second call,
press A [Reject], or press C [Options] and
press a or b to highlight “Busy” or “Reject,”
then press B in step 2. If “Reject” is selected,
the call log of the second call is saved as a
missed call.
Basic Handset Operations
Basic Handset Operations
Up to 9 phone numbers from the “Contacts list” memory
(Handset and SIM) can be assigned to speed dials. You
can call the numbers using the digit keys. For information
on the “Speed dial list,” refer to “Setting the Speed Dial
List” on page 9-60.
Press a or b to highlight “Hold & Answer” and
press B.
When selecting “Create Message”:
allows you to make a Text message.
When selecting “Inbox,” “Sent,” or “Drafts”:
allows you to access these folders. For more
information on Text message, refer to “Using the
Message Service” on page 11-65.
With one active call and one held call, press C
[Options].
The “Options” menu appears.
6-29
You can talk with all the people on the line.
Press a or b to highlight “Multiparty” and press
B.
6-30
Press F to end the conference call.
The conference call ends.
To add new participants to the conference call
During the call, press C [Options] and select
“Dial.”
Enter the phone number you wish to include in
the conference call.
Press D.
After the call is connected, continue from the step 1
of “Conference Call.”
If you wish to include other participants in the
conference call, perform the same process again.
Conference Call
This service enables you to call more than 2 people at the
same time. You can talk with 5 participants at most with
this service. To make a conference call, you must have
one active call and one held call.
Press a or b to highlight “Conference all” and
press B to initiate the conference call.
To put all the participants on hold
During the call, press C [Options] and select in
the following order : “Multiparty”
“Conference
all.”
Press a or b to highlight “Conference Hold all”
and press B.
2
To reject adding more participants
To end the call with all participants
During the call, press C [Options] and select in
the following order : “Multiparty” “Conference
all.”
During the call, press C [Options] and select in
the following order : “Multiparty”
“Conference
all.”
Press a or b to highlight “Reject” to reject or
“Busy” to send the busy tone and press B.
Press a or b to highlight “Release all” and
press B.
During the call, press C [Options] and select in
the following order : “Multiparty” “Conference
all.”
Press a or b to highlight “Exclude” and press
B.
To disconnect from the conference call but still
allow the other participants to continue
talking together
During the call, press C [Options] and select in
the following order : “Multiparty” “Conference
all.”
Press a or b to highlight “Transfer” and press
B.
During a conference call, press a or b to
highlight the person that you wish to disconnect
from the conference call.
Press C [Options].
The “Options” menu appears.
Press a or b to highlight “Release call” and
press B.
To have a conversation with participants
privately
Basic Handset Operations
To end the call with a conference call
participant
The “Options” menu appears.
Basic Handset Operations
To put the current call on hold and continue
having a conference call with the remaining
participants
Press C [Options].
Press a or b to highlight “Multiparty” and press
B.
Press a or b to highlight “Private” and press
B.
When you have finished the private
conversation, continue from step 1 of
“Conference Call (page 6-30).”
The conference call service may not be available
on all networks. Contact your service provider for
more information.
When you wish to have a conversation with one of the
participants privately, you can select a person from the
conference list and put others on hold.
During a conference call, press a or b to
highlight the person that you wish to disconnect
from the conference call.
6-31
6-32

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 3
Create Date                     : 2004:05:19 10:49:17
Producer                        : Acrobat Distiller 3.0.2J (Power Macintosh 版)
Author                          : suzukikenji
Creator                         : PScript5.dll Version 5.2
Title                           : 040518_tm150fcc_e_link.pdf

EXIF Metadata provided by EXIF.tools