Sharp Xe A101 Quick Guide Start
Xea101-Quick-Guide xea101-quick-guide
2015-03-09
: Sharp Sharp-Xe-A101-Quick-Guide-644159 sharp-xe-a101-quick-guide-644159 sharp pdf
Open the PDF directly: View PDF .
Page Count: 1
Download | |
Open PDF In Browser | View PDF |
XE-A101 Quick Start Guide English The following describes how to get your cash register ready to operate. Follow these steps when you use the cash register for the first time. 1 Initializing the Cash Register To ensure the cash register operates properly, initialize it using the following procedure: 1. Set the mode switch to the REG position with the power cable unplugged. OFF REG VOID 2 Installing Batteries Install batteries for back-up of sales data and programmed contents. 3 Installing a Paper Roll 1. Push the paper roll release lever and install the paper roll so that the paper unrolls from the bottom. 4 5 Basic Programming Set the mode switch to the Z/PGM postition. OFF REG 1. Push the printer cover forward and detach it. VOID Now, you are ready! Before Starting Entries Set the mode switch to the REG postition. X/F Z/PGM VOID OFF REG X/F Z/PGM Setting the Time Enter the time in 4 digits (“hhmm” format) using the 24 hour X/F Z/PGM 2. Insert the plug of the power cable into the AC outlet. #/ SBTL 2. Open the battery cover next to the paper roll cradle. 2. Insert the paper straight into the paper inlet, and press the f key. The inserted end comes out at the printing area. IMPORTANT This operation must be performed without batteries loaded. system. Press the key once to program the next item or twice to exit the programming mode. Example: #/ #/ SBTL 3. Now the cash register has been initialized. The register display will show “0.00” with “l” . Date(March 15, 2002) 3. (For journal printing) Insert the top end of the paper into the slit in the take-up spool shaft and wind the paper two or three turns. Then place the take-up spool on the bearing. View from rear 1 instruction manual (English) 1 instruction manual (Spanish) 1 Quick Start Guide 1 ink roller (pre-installed) 1 take-up spool CLK# #/ SBTL format. Press the key once to program the next item or twice to exit the programmig mode. #/ #/ Example: SBTL SBTL The buzzer will sound three times. 2 drawer lock keys 1 Clerk code Enter the date in 6 digits using the month-day-year 3. Insert three new “AA” batteries. (Batteries are not supplied with the cash register.) 1 paper roll CLK# Time(2:30 p.m.) Setting the Date View from rear The following are supplied with your cash register. SBTL Enter a clerk code (1-4) and press . (Once the clerk code entered, re-entry of the clerk code is not needed until the clerk is changed.) 4. When the batteries are properly installed, l” on the display will disappear. “l Close the battery cover. IMPORTANT Improper use of batteries may damage the cash register. Please take the following precautions. ➝ @/TM ➝ Tax number (1-4)* ➝ ➝Q➝ #/ SBTL @/TM ➝R (For receipt printing, step 3 should be omitted.) Price and dept. 7 #/ SBTL 3 Price and dept. Example: and press @/TM @/TM Tax rate(7.0000%) Initial settings Departments 1-4: Taxable 1 Departments 5-8: Non-taxable Amount tendered X Reports (reading) Set the mode switch to the X/F position . Z Reports (reading and resetling) Min. taxable amount($0.11) NOTE Your cash register is pre-programmed so that you can use it with minimum set-up. To change the settings, see the instruction manual. Please read the instruction manual for other battery handling precautions. Clerk code Reading and Resetting Tax 1 4. Attach the printer cover. 5 1 where R: Tax rate (0.0000% to 99.9999%)x10000 (Enter the rate in 6 digits. Leading zeros may be omitted.) Q: Minimum taxable amount (0.01 to 99.99)x100 (Smallest amount for which tax must be collected. ) *Up to 4 types of tax are programmable. #/ SBTL •Be sure that the positive (+) and negative (-) poles of each battery are oriented properly. •Never mix batteries of different types. •Never mix old batteries and new ones. For further information, please read the instruction manual. Specify a tax rate (%) for calculation of tax on each taxable subtotal using the following sequence: ➝ (When the Customer Pays by Cash) CLK# Setting Tax Rates (%) 9 Registration Example In the Z/PGM mode, press .(In this case, grand total resetting is not performed.) Flash Reports (displayed but not printed) In the X/F mode: Press dept. key for dept. sales reports Press for sales total reports #/ SBTL Press CH for cash-in-drawer reports Printed in Korea/Impreso en Corea O(TCADH2395BHZZ)1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res Create Date : 2001:11:05 13:42:10Z Modify Date : 2002:07:23 15:08:52-04:00 Subject : Quick Start Guide for the Small Business Cash Register XE-A101 Keywords : guide, reference guide, guide, instructions, quick start guide, quick start, help Page Count : 1 Creation Date : 2001:11:05 13:42:10Z Producer : Acrobat Distiller 4.05 for Macintosh Mod Date : 2002:07:23 15:08:52-04:00 Author : Sharp Electronics Metadata Date : 2002:07:23 15:08:52-04:00 Description : Quick Start Guide for the Small Business Cash Register XE-A101 Creator : Sharp Electronics Title : XE-A101 Quick Start GuideEXIF Metadata provided by EXIF.tools