Sharp XL MP15H XLMP15H User Manual To The 5609d53b 3b3f 4129 B42a 6e21ceb33bc5

User Manual: Sharp XL-MP15H to the manual

Open the PDF directly: View PDF PDF.
Page Count: 20

04/1/28 XL-MP15H_AUS_Front
OPERATION MANUAL
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully.
It will guide you in operating your SHARP product.
XL-MP15H Micro Component System consisting of XL-MP15H (main unit) and CP-MP15H (speaker system).
MODEL
XL-MP15H
MICRO COMPONENT SYSTEM
XL-MP15H AUS 01-16.fm
1
2009June11
Special notes
WARNINGS
●
When the ON/STAND-BY button is set at STAND-BY position,
mains voltage is still present inside the unit. When the
ON/STAND-BY button is set at STAND-BY position, the unit may
be brought into operation by the timer mode or remote control.
●
This unit contains no user serviceable parts. Never remove
covers unless qualified to do so. This unit contains dangerous
voltages, always remove mains plug from the socket before any
service operation and when not in use for a long period.
●
To prevent fire or shock hazard, do not expose this appliance to
dripping or splashing. No objects filled with liquids, such as
vases, shall be placed on the apparatus.
●
Do not turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from earphones and
headphones can cause hearing loss.
Note for users in Australia:
Copyright may exist in material you wish to record. Copying or
broadcasting such material without permission of the relevant
licensees or owners of the copyright is prohibited by law. SHARP is
not in a position to authorise the copying or broadcasting of
copyright materials and nothing in this OPERATION MANUAL
should be implied as giving that authority.
For other countries:
Audio-visual material may consist of copyrighted works which must
not be recorded without the authority of the owner of the copyright.
Please refer to the relevant laws in your country.
CAUTION
●
This product is classified as a CLASS 1 LASER product.
●
This product contains a low power laser device. To ensure
continued safety, do not remove any cover or attempt to gain
access to the inside of the product. Refer all servicing to qualified
personnel.
Special Note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast
systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating streaming applications (via Internet, intranets and/or
other networks), other revenue-generating content distribution systems (pay-audio or audio-on-demand applications and the like) or on revenue-
generating physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent
license for such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Accessories
Please confirm that only the following accessories are included.
Page
General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . 2 - 3
Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc . . . . . . . . . . . . 7 - 8
Advanced CD or MP3/WMA disc playback . . . . . . . 9 - 10
MP3/WMA folder mode (only for MP3/WMA files) . . . . 11
Page
Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Advanced Features
Timer and sleep operation . . . . . . . . . . . . . . . . . 13 - 14
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . 14
References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . 15
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Remote control x 1 “AAA” size battery (UM-4, R03,
HP-16 or similar) x 2
Antislip speaker cushion sheet
x 8
AM loop aerial x 1
CONTENTS
8
7
6
5
4
3
2
1
XL-MP15H AUS 01-16.fm
2
2009June11
Precautions
●
Please ensure that the equipment is positioned in a well-
ventilated area and ensure that there is at least 10 cm (4") of free
space along the sides, top and back of the equipment.
●
Do not place anything on top of the unit.
●
Do not expose the unit to moisture, to temperatures higher than
60˚C (140˚F) or to extremely low temperatures.
●
If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
●
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
●
Attention should be drawn to the environmental aspects of
battery disposal.
●
This unit should only be used within the range of 5˚C - 35˚C
(41˚F - 95˚F).
●
The apparatus is designed for use in moderate climates.
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible for
any damage resulting from use of this unit with a voltage other than
that which is specified.
The sound level at a given volume setting depends on speaker
efficiency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on. Listen to music at moderate levels. Excessive sound
pressure from earphones and headphones can cause hearing loss.
Controls and indicators
Reference page
1. Disc Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2. ON/STAND-BY Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. Function Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Stand-by Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5. Disc Track Down or Fast Reverse, Tuner Preset Down,
Time Down Button . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 12, 13
6. Disc Track Up or Fast Forward, Tuner Preset Up,
Time Up Button. . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 12, 13
7. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
8. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
9. Tuning Up/Folder Up Button . . . . . . . . . . . . . . . . . . . . 10, 12
10. Tuning Down/Folder Down Button . . . . . . . . . . . . . . . 10, 12
11. Stop Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 10
12. Play/Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 11
13. Audio In Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
14. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
■
General
●
Use the unit on a firm, level
surface free from vibration.
●
Keep the unit away from direct
sunlight, strong magnetic fields,
excessive dust, humidity and
electronic/electrical equipment
(home computers, facsimiles,
etc.) which generate electrical
noise.
●
In case of an electrical storm,
unplug the unit for safety.
●
Hold the AC power plug by the head
when removing it from the wall socket,
as pulling the lead can damage internal
wires.
●
The AC power plug is used as a
disconnect device and shall always
remain readily operable.
MICRO COMPONENT SYSTEM
XL-MP15
PHONES
ON/ STAND-BY
REMOTE
SENSOR
PRESET
FUNCTION TUNING/FOLDER
AUDIO IN
10 cm (4") 10 cm (4")
10 cm (4")
10 cm
(4")
MICRO COMPONENT SYSTEM
XL-MP15
PRESET
TUNING/FOLDER
TUNING/FOLDER
MICRO COMPONENT SYSTEM
XL-MP15
PRESET
TUNING/FOLDER
TUNING/FOLDER
●
Do not remove the outer
cover, as this may result in
electric shock. Refer internal
service to your local SHARP
service facility.
●
The ventilation should not be
impeded by covering the
ventilation openings with items,
such as newspapers,
tablecloths, curtains, etc.
■
Volume control
MICRO COMPONENT SYSTEM
XL-MP15
PRESET
TUNING/FOLDER
TUNING/FOLDER
MICRO COMPONENT SYSTEM
MICRO COMPONENT SYSTEM
XL-MP15
XL-MP15
PHONES
PHONES
ON/ STAND-BY
ON/ STAND-BY
REMOTE
REMOTE
SENSOR
SENSOR
PRESET
PRESET
AUDIO
AUDIO
IN
IN
2
5
3
4
6
713
11
10
9
8
14
12
1
■
Front panel
XL-MP15H AUS 01-16.fm
3
2009June11
Controls and indicators (continued)
Reference page
1. AM Mode Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2. FM Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . 12
4. Timer Play Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 12
6. Tuner Receiving Frequency Indicators . . . . . . . . . . . . . . 12
Reference page
1. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2. FM Aerial Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. AM Loop Aerial Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 5
2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. CD Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 10
4. CD Play/Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 11
5. Disc Track Down or Fast Reverse, Tuner Preset Down,
Time Down Button . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 12, 13
6. Disc Track Up or Fast Forward, Tuner Preset Up,
Time Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8, 12, 13
7. Tuning Down/Folder Down Button . . . . . . . . . . . . . . . 10, 12
8. Tuning Up/Folder Up Button . . . . . . . . . . . . . . . . . . . . 10, 12
9. Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
10. Sleep Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
11. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 7, 13, 14
12. Audio In Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
13. Tuner [Band] Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
14. Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
15. Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
16. Memory/Display Button. . . . . . . . . . . . . . . . . . . . . 10, 11, 12
17. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 6
18. Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
19. Extra Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
20. Equaliser Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6
1 2 3 4 5
1
2
4
3
10
11
15
16
17
18
19
20
12
13
14
2
5
7
8
6
9
3
4
1
■
Display
■
Rear panel
■
Speaker system
1. Full Range
2. Bass Reflex Duct
3. Speaker Wire
■
Remote control
3
2
1
8
7
6
5
4
3
2
1
XL-MP15H AUS 01-16.fm
4
2009June11
System connections
Attached FM aerial:
Position the FM aerial wire in the direction where the strongest
signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM loop aerial socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
Make sure to unplug the AC power lead before making any connections.
Right speaker
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
Left speaker
AM loop aerial
■Aerial connection (see page 4)
■Speaker connection
(see page 5) ■AC power connection (see page 5)
FM aerial
■
Aerial connection
< Assembling > < Attaching to the wall >
Wall Screws
(not supplied)
XL-MP15H AUS 01-16.fm
5
2009June11
System connections (continued)
Connect the black wire to the minus (–) terminal, and the red wire to
the plus (+) terminal.
Caution:
You can install the speakers either vertically or horizontally. Affix the
cushions (supplied) to the bottom of the speakers to prevent them
from sliding or falling due to vibration.
A sheet of speaker cushions (8 pcs) is supplied with this product.
Use 4 cushions per speaker.
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
Remote control
Precautions for battery use:
●
Replace all old batteries with new ones at the same time.
●
Do not mix old and new batteries.
●
Remove the batteries if the unit is not to be used for long period
of time. This will prevent potential damage due to battery
leakage.
Caution:
●
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
●
Installing the batteries incorrectly may cause the unit to
malfunction.
●
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
Battery removal:
Open the battery cover and pull up the battery to take out.
Notes concerning use:
●
Replace the batteries if the operating distance is reduced or if
the operation becomes erratic. Purchase 2 “AAA” size batteries
(UM-4, R03, HP-16 or similar).
●
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
●
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
●
Keep the remote control away from moisture, heat, shock, and
vibrations.
Check the remote control after checking all the connections (see
pages 4 - 5).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy the music.
■
Speaker connection
●
Use speakers with an impedance of 4 ohms or more, as lower
impedance speakers can damage the unit.
●
Do not mistake the right and the left
channels. The right speaker is the one on
the right side when you face the unit.
●
Do not let the bare speaker wires touch
each other.
●
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
●
Do not stand or sit on the speakers. You
may be injured.
■
Using antislip speaker cushions
■
AC power connection
Red Black
Incorrect
(Vertical position) (Horizontal position)
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
■
Battery installation
1
Open the battery cover.
2
Insert the supplied batteries according to the direction indicated
in the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
3
Close the cover.
■
Test of the remote control
STAND-BY
ON
MICRO COMPONENT SYSTEM
XL-MP15
PHONES
ON/ STAND-BY
REMOTE
SENSOR
AUDIO
IN
PRESET
0.2 m - 6 m
(8" - 20')
Remote sensor
8
7
6
5
4
3
2
1
XL-MP15H AUS 01-16.fm
6
2009June11
General control
In the stop mode of CD operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
●
If you turn off and on the main unit with volume set to 16 or
higher, the volume will start at 16.
●
If you turn the unit off then on again with the volume level set to
less than 15, it will turn on again in the level set.
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOL (+ or –) button to increase or decrease the volume.
When the X-BASS button is pressed, the unit will enter the extra
bass mode which emphasises the bass frequencies and “X-BASS
ON” will appear.
To cancel the extra bass mode, press the X-BASS button until
“X-BASS OFF” appear.
When the FUNCTION button on main unit is pressed, the current
function will change to different mode. Press the FUNCTION button
repeatedly to select desired function.
Note:
The backup function will protect the memorised function mode
(except clock) for a few hours should there be a power failure or the
AC power lead becomes disconnected.
The volume is muted temporarily when pressing the MUTE button
on the remote control. Press again to restore the volume.
When the EQUALIZER button on the remote control is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER button repeatedly until the desired
sound mode appears.
■
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
At
STAND-BY mode, red indicator will light up.
■
Auto power off function
■
Volume auto set-in
■
Volume control
MICRO COMPONENT SYSTEM
MICRO COMPONENT SYSTEM
XL-MP15
XL-MP15
PHONES
PHONES
ON/ STAND-BY
ON/ STAND-BY
REMOTE
REMOTE
SENSOR
SENSOR
AUDIO IN
AUDIO IN
PRESET
PRESET
ON/ STAND-BY
ON/ STAND-BY
FUNCTION
FUNCTION
VOL
VOL
STAND-BY
STAND-BY
ON
ON
X-BASS
X-BASS
MUTE
MUTE
EQUALIZER
EQUALIZER
30 MAXMIN .....
■
Extra bass control (X-BASS)
■
Function (on main unit only)
■
Muting
■
Equaliser
CD TUNER
AUDIO IN
ROCK
FLAT
CLASSIC
POPS
JAZZ
XL-MP15H AUS 01-16.fm
7
2009June11
Setting the clock
In this example, the clock is set for the 24-hour (00:00) display.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will appear for
about 5 seconds.
To readjust the clock after a power failure or unplugging the
unit or after unit is reset:
Perform “Setting the clock” from beginning.
Note:
To reset the clock if the power fails or is unplugged, the unit must be
in the STAND-BY mode.
Listening to a CD or MP3/WMA disc
This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot record on
them. Some audio CD-R and CD-RW discs may not be playable due
to the state of the disc or the device that was used for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands for
MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
●
This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
●
During VBR file playback, time counter in the display may differ
from its actual playback time.
●
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for
Windows Media Player.
●
Bitrate which is supported by WMA is 64 ~ 160 kbps.
1
In STAND-BY condition.
2
Press the CLOCK/TIMER button for more than 2 seconds.
3
Within 10 seconds, press the PRESET ( or ) button to set
hour.
4
Press the CLOCK/TIMER button again.
5
Within 10 seconds, press the PRESET ( or ) button to set
minute.
6
Press the CLOCK/TIMER button again.
TIMER
TIMER
CLOCK
CLOCK
STAND-BY
STAND-BY
ON
ON
PRESET
PRESET
MICRO COMPONENT SYSTEM
MICRO COMPONENT SYSTEM
XL-MP15
XL-MP15
PHONES
PHONES
ON/ STAND-BY
ON/ STAND-BY
REMOTE
REMOTE
SENSOR
SENSOR
ON/ STAND-BY
ON/ STAND-BY
AUDIO IN
AUDIO IN
PRESET
PRESET
PRESET
PRESET
8
7
6
5
4
3
2
1
XL-MP15H AUS 01-16.fm
8
2009June11
Listening to a CD or MP3/WMA disc (continued)
To interrupt playback:
●
Press the / (CD / ) button during playback. The playing
time will blink to indicate pause condition.
●
Press the / (CD / ) button again to resume playback.
To listen to the track being played again:
During playback, press the
button.
To move to the beginning of the next track:
During playback, press the
button.
To skip a number of tracks at one time:
Press the
or button repeatedly until the desired
track number is shown.
To start playback a desired track:
Press the
or button whilst in the stop mode to
select the track number and then press the / (CD / ) button.
To fast forward audibly:
During playback, press and hold down the button. Release
the button to resume playback.
To fast reverse audibly:
During playback, press and hold down the
button. Release
the button to resume playback.
To stop playback:
Press the (CD ) button.
Caution:
●
Do not play discs of special shapes (heart, octagon, etc.). It may
cause malfunctions.
●
If a disc is damaged, dirty, or loaded upside down, “NO DISC”
will appear on the display.
●Keep foreign objects out of the disc compartment.
●Subjecting the unit to shock or vibration may cause mistracking.
●When the unit is not being used, be sure to close the disc
compartment. If it is left open, the lens may be covered with dust
and the unit may not operate properly.
●If TV or radio interference occurs during disc operation, move
the unit away from the source of the interference.
Notes for CD or MP3/WMA disc:
●Rewritable multi-session discs with unfinished writing, can still
be played.
●When a disc (CD, WMA or MP3) is input, “TOC READ” will be
displayed for several seconds depending on the number of files
in the disc. If this indication is displayed for an indefinite period
of time due to unspecified file being played or external noise etc.,
switch off the main AC power supply and then switch it on again.
1Press the ON/STAND-BY button to turn the power on.
2Open the disc compartment.
3Place the disc on the spindle, label side up.
8 cm (3") disc may be played without an adaptor.
4Close the disc compartment.
●Due to the structure of its disc information, it takes longer
(approximately 20 to 90 seconds) to read a CD-R/RW disc
recorded in the MP3 or WMA format than a normal CD.
5Press the / (CD / ) button to start playback from track 1.
When the last track on the disc has finished playing, the unit will
stop automatically.
FUNCTION
FUNCTION
MICRO COMPONENT SYSTEM
MICRO COMPONENT SYSTEM
XL-MP15
XL-MP15
PHONES
PHONES
ON/ STAND-BY
ON/ STAND-BY
REMOTE
REMOTE
SENSOR
SENSOR
ON/ STAND-BY
ON/ STAND-BY
STAND-BY
STAND-BY
CD
CD
ON
ON
AUDIO IN
AUDIO IN
PRESET
PRESET
MICRO COMPONENT SYSTEM
MICROCOMPONENT SYSTEM
XL-MP15
XL-MP15
ON/STAND BY
ON/STANDBY
REMOTE
SENSOR
12 cm (5") 8 cm (3")
or
Total number
of tracks on
the disc
Total playing
time of the
disc
Total number
of folders on
the disc
Total number
of files (track)
on the disc
■Various disc functions
Function Main unit Remote control Operation
Play Press in the
stop mode.
Stop Press in the
playback
mode.
Pause Press in the
playback
mode. Press
the /
(CD / )
button to
resume
playback from
the paused
point.
Track up/
Track
down
Press in the
playback or
stop mode.
If you press the
button in the
stop mode,
press the /
(CD / )
button to start
the desired
track.
Fast
forward/
Fast
reverse
Press and hold
down in the
playback
mode.
Release the
button to
resume
playback.
PRESET
PRESET
PRESET
PRESET
PRESET
PRESET
PRESET
PRESET
XL-MP15H AUS 01-16.fm
9
2009June11
Advanced CD or MP3/WMA disc playback
By using the Direct Search buttons, the desired tracks on the current
disc can be played.
●The Direct Search buttons allow you to select up to number 9.
●When selecting number 10 or higher, use the “+10” button.
Whilst in the stop mode:
Press the Direct Search buttons to select desired track and the
selected track will be played back.
Whilst playing the disc:
The desired track can be selected by simply pressing the Direct
Search buttons and the selected track will be played back.
Notes:
●A track number higher than the number of tracks on the disc
cannot be selected.
●During random play, direct search is not possible.
●For CD-R/RW discs recorded in the MP3 or WMA format, you
can select the track number but cannot select the folder by
pressing the Direct Search buttons.
To stop playback:
Press the (CD ) button.
Repeat play can play single track, folder tracks or all tracks
sequence continuously.
First time press the REPEAT button, the display will show current
repeat mode. Within 3 seconds, press REPEAT button again to
change the repeat mode in the following order:
Caution:
After performing repeat, be sure to press the (CD ) button.
Otherwise, it will play continuously.
The tracks on the disc can be played in random order automatically.
To cancel random playback, press the RANDOM button again.
Notes:
●If you press the or button during random play,
you can move to the track selected next by the random
operation.
●In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
●During random play, repeat function is not possible.
●In random playback it will contine until "stop" is pressed
.
Notes:
●This unit only supports “MPEG-1 Audio Layer-3” format.
(Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2 Audio Layer-3”, “MPEG-2.5 Audio Layer-3” and MP1,
MP2 format are not supported.
●Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.
●Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
●For MP3/WMA files, please put “.MP3” “.WMA” extension. Files
cannot be played back if there is no MP3/WMA extension.
●Playlists are not supported on this unit.
●This unit only supports MP3 ID3-Tag version 1.x.
●The display playback time may not be displayed correctly when
playing back a variable bitrate file.
●WMA meta tag also supports title, artist and album name which
are recorded in WMA files.
●Copyright protected WMA files cannot be played back.
■Direct track search (REMOTE CONTROL
ONLY)
Use the Direct Search buttons on
the remote control to select the
desired track whilst playing or in
the stop mode.
Selected track number
A. For example, to choose 13
1Press the “+10” button once.
2Press the “1” button.
3Press the “3” button.
B. For example, to choose 130
1Press the “+10” button twice.
2Press the “1” button.
3Press the “3” button.
4Press the “0” button.
■Repeat play (REMOTE CONTROL ONLY)
In case of an audio CD mode:
12
34
56
78
90
12
34
56
78
90
10
REPEAT
RANDOM
Repeat the current playing track.
Repeat the current playing disc.
The normal playback.
“NORMAL”
“RPT ONE”
“RPT ALL”
In case of a MP3/WMA disc mode:
■Random play (REMOTE CONTROL ONLY)
To random play all tracks:
Press the RANDOM button on the remote control. Main unit will
show “RANDOM” after playback a track.
Repeat the current playing track.
Repeat the current playing folder.
Repeat the current playing disc.
The normal playback.
“NORMAL”
“RPT ONE”
“RPT FLD”
“RPT ALL”
8
7
6
5
4
3
2
1
XL-MP15H AUS 01-16.fm
10
2009June11
Advanced CD or MP3/WMA disc playback (continued)
To cancel the programmed play mode:
During programmed stop mode, press the (CD ) button. The
display will show “CLEAR” and all the programmed contents will be
cleared.
Notes:
●If the disc lid is opened, the programmed sequence will be
cancelled.
●The programme will automatically cancelled if you press the
ON/STAND-BY button to enter the stand-by mode or change the
function from CD to another.
●During the programme operation, press the RANDOM button will
automatically cancelled the programme.
To cancel the programmed play mode:
During programmed stop mode, press the (CD ) button. The
display will show “CLEAR” and all the programmed contents will be
cleared.
Notes:
●If the disc lid is opened, the programmed sequence will be
cancelled.
●The programme will automatically cancelled if you press the
ON/STAND-BY button to enter the stand-by mode or change the
function from CD to another.
●During the programme operation, press the RANDOM button will
automatically cancelled the programme.
■Programmed play
1Whilst in the stop mode, press the MEMORY/DISP button to
enter the programming save mode.
2Press the or button to select the desired
tracks.
3Press the MEMORY/DISP button to save the track number.
4Repeat steps 2 – 3 for other tracks. Up to 32 tracks can be
programmed.
5Press the / (CD / ) button to start playback.
AUDIO IN
AUDIO IN
PRESET
PRESET
■Programmed play (Folder mode)
1Whilst in the stop mode, press the MEMORY/DISP button to
enter the programming save mode.
“MEM” icon light up to indicate programming save mode.
2Press the TUNING/FOLDER ( or ) button on the remote
control to select the desired folder.
Then press the or button on the remote
control to select the desired tracks.
3Press the MEMORY/DISP button to save the folder and track
number.
4Repeat steps 2 – 3 for other folder/tracks. Up to 32 tracks can
be programmed.
5Press the / (CD / ) button to start playback.
“MEM” icon will blink to indicate programmed playback.
AUDIO IN
AUDIO IN
PRESET
PRESET
XL-MP15H AUS 01-16.fm
11
2009June11
MP3/WMA folder mode (only for MP3/WMA files)
To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can download
MP3/WMA (Windows Media Audio) music files. Follow the
instructions from the website on how to download from the music
files.
You can then play back these downloaded music files by burning
them to a CD-R/RW disc.
●Your downloaded song/files are for personal use only. Any other
usage of the song without owner’s permission, is against the law.
If MP3/WMA files are recorded in several folders, a folder number
will be set to each folder automatically.
These folders can be selected by the TUNING/FOLDER ( or )
button on the remote control. If there is no supported file formats
inside the selected folder, the folder is skipped and the next folder
will be selected.
Example: How to set folder number if MP3/WMA format files are
recorded as below figure.
* The folder and file order information which is recorded on the disc
depends on the writing software. There maybe possibilities that this
unit will playback the files not according to our expected playback
order.
All the files inside the selected folder will be played back.
In case Folder D is selected, file 4, 5 and 6 will be played back. File
7 and 8 in Folder E will not be played back.
To playback CD-R/RW.
Note:
If “NO DISC” is displayed, it means “Copyright protected WMA file”
or “Not supported playback file” is selected.
■About folder playback order
1ROOT folder is set as folder 1.
2As for folders inside ROOT folder (Folder A and Folder B), the
folder which is recorded earlier on the disc will be set as folder 2.
3As for folder inside Folder A (Folder C and Folder D), the folder
which is recorded earlier on the disc will be set as folder 3.
4Because there is no folder in Folder C, Folder D will be set as
folder 4.
5Folder E that is inside Folder D will be set as folder 5.
6Folder B inside ROOT folder will be set as folder 6.
ROOT
(FOLDER 1)
FOLDER A
(FOLDER 2)
FOLDER B
(FOLDER 6)
FILE 7
FILE 8
FILE 1
FILE 2
FILE 3
FILE 4
FILE 5
FILE 6
FOLDER E
(FOLDER 5)
FOLDER C
(FOLDER 3)
FOLDER D
(FOLDER 4)
FILE 9
FILE 10
■Procedure to playback MP3/WMA disc
1Press the CD button, and load a MP3/WMA disc.
●After disc is loaded, the disc info will be displayed.
●In case in folder mode, proceed to step 2.
●In case track is selected, proceed to step 3.
2Press the TUNING/FOLDER ( or ) button to select desired
playback folder.
●It will playback in the 1st track of the selected folder when
/ (
CD
/ ) is pressed.
3Select desired track to be played back by pressing the
or button.
4
Press the
/ (CD / )
button and playback will start.
●Press the MEMORY/DISP button to display Title, Artist and
Album name if it is recorded on the disc.
●To cancel the display of Title, Artist and Album name, press
the MEMORY/DISP button until track number appear.
●Title, Artist and Album name will scroll through the display as
follows.
MP3 ID3-Tag only support version 1.x.
Total number
of tracks
Total number
of folders
Track number
Title
Artist
Album
8
7
6
5
4
3
2
1
XL-MP15H AUS 01-16.fm
12
2009June11
Listening to the radio
Note:
This product can receive FM stereo/FM monaural and AM monaural
broadcasts. AM stereo broadcasts will not be played in stereo.
Notes:
●When radio interference occurs, auto scan tuning may stop
automatically at that point.
●Auto scan tuning will skip weak signal stations.
●To stop the auto tuning, press the TUNING/FOLDER
( or ) button again.
To receive FM stereo transmission:
Press the TUNER (BAND) button to select stereo mode and “ST”
indicator will be displayed.
●If the FM reception is weak, press the TUNER (BAND) button to
extinguish the “ST” indicator. The reception changes to
monaural, and the sound becomes clearer.
You can store 40 FM and AM stations in memory and recall them at
the push of a button (PRESET
( or )).
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead become
disconnected.
The stations saved in memory can be scanned automatically.
(Preset memory scan).
■Tuning
1Press the ON/STAND-BY button to turn the power on.
2Press the TUNER button on the remote control or FUNCTION
button repeatedly on the main unit to select tuner function.
3Press the TUNING/FOLDER ( or ) button to tune into the
desired station.
Manual tuning:
Press the TUNING/FOLDER ( or ) button as many times as
required to tune in the desired station.
Auto tuning:
When the TUNING/FOLDER ( or ) button is pressed for
more than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
MICRO COMPONENT SYSTEM
MICRO COMPONENT SYSTEM
XL-MP15
XL-MP15
PHONES
PHONES
ON/ STAND-BY
ON/ STAND-BY
REMOTE
REMOTE
SENSOR
SENSOR
ON/ STAND-BY
ON/ STAND-BY
FUNCTION
FUNCTION
AUDIO IN
AUDIO IN
PRESET
PRESET
TUNING FOLDER
TUNING FOLDER
DISP
DISP
MEMORY
MEMORY
BAND
BAND
TUNER
TUNER
FM stereo mode indicator
■Memorising a station
1Perform steps 1 - 3 in “Tuning” on page 12.
2Press the MEMORY/DISP button to enter the preset tuning
saving mode.
3Within 5 seconds, press the PRESET
( or ) button to select
the channel to be preset.
4Press the MEMORY/DISP button.
In this example, “103.25 MHz” FM station is preset on FM
channel 9.
5Repeat steps above to add more preset stations.
●When presetting a new station, the previous preset station
is cleared.
■To recall a memorised station
Press the PRESET
( or ) button for less than 0.5 seconds to
select the desired station.
■To scan the preset stations
1Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2Press the PRESET ( or ) button again when the desired
station is located.
PRESET
PRESET
XL-MP15H AUS 01-16.fm
13
2009June11
Timer and sleep operation
Before setting timer:
Checking the timer setting:
Cancelling the timer setting:
Press the SLEEP button for 2 seconds. The “ ” indicator disappear
and the display show “TMR-OFF”.
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, press the SLEEP button for 2 seconds.
The “ ” indicator light up and the display show “TMR-ON”.
Notes:
●After selecting the playback source, when press the
CLOCK/TIMER button to confirm, “SOURCE” will appear and
blink for 2 seconds, then change to last function.
●When the preset time is reached, playback will start at current
setting if no selected playback source is made.
●The volume cannot be preset during timer setting.
■Timer playback
1Check that the clock is set to the correct time (refer to page 7).
If it is not set, you cannot use the timer function.
2For timer playback, load the disc to be played back.
1Press the ON/STAND-BY button to turn the power on.
2Press the CLOCK/TIMER button for about 2 seconds.
3Within 10 seconds, press the CLOCK/TIMER button.
4Press the PRESET ( or ) button to set hour then press the
CLOCK/TIMER button.
5Press the PRESET ( or ) button to set minute and then
press the CLOCK/TIMER button.
6Switch input with the PRESET ( or ) button to select
“TMR-OFF” and then press the CLOCK/TIMER button.
7Press the PRESET ( or ) button to set hour and then press
the CLOCK/TIMER button.
8Press the PRESET ( or ) button to set minute and then
press the CLOCK/TIMER button.
9To select the timer playback source, switch input with PRESET
( or ) button to select “SOURCE”.
AUDIO IN
AUDIO IN
PRESET
PRESET
10 To select CD, press the / (CD / ) button and then press
the CLOCK/TIMER button.
11 To select TUNER, press the TUNER (BAND) button and then
press the CLOCK/TIMER button.
12 Select a station by pressing the PRESET ( or ) button and
then press the CLOCK/TIMER button to set the station selected.
OR
13 To select a preset channel number, press the PRESET ( or
) button and then press the CLOCK/TIMER button.
14 The “ ” indicator lights up and the unit is ready for timer
playback.
15 Press the ON/STAND-BY button to enter the power stand-by
mode. Press the CLOCK/TIMER button to confirm the timer
setting.
16 When the preset time is reached, playback will start. “ ”
indicator will blink to show timer playback.
17 When the timer end time is reached, the system will enter
the power stand-by mode automatically.
1Press the CLOCK/TIMER button repeatedly to view as follow:
OR
8
7
6
5
4
3
2
1
XL-MP15H AUS 01-16.fm
14
2009June11
Timer and sleep operation (continued)
The radio, compact disc and audio in mode can all be turned off
automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
Enhancing your system
The connection lead is not included. Purchase a commercially
available lead as shown below.
Note:
To prevent noise interference, place the unit away from the
television.
●Do not turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from earphones and
headphones can cause hearing loss.
●Before plugging in or unplugging the headphones, reduce the
volume.
●Be sure your headphones have a 3.5 mm (1/8") diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
●Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
■Sleep operation
1Play back the desired sound source.
2Press the SLEEP button repeatedly to select the time.
(Maximum: 90 minutes - Minimum: 10 minutes)
3The unit will enter the power stand-by mode automatically after
the preset time has elapsed.
1Press the SLEEP button once.
●The remaining sleep time is displayed for about 10 seconds.
●You can change the remaining sleep time whilst it is
displayed by pressing the SLEEP button (step 2).
1Press the SLEEP button repeatedly to select “SLEEP 00”.
■To use timer and sleep operation together
1Set the sleep time (see “Sleep Operation”).
2Whilst the sleep timer is set, set the timer playback (steps 2 - 14,
page 13).
Timer playback start time
Sleep operation will
automatically stop
Timer playback settingSleep timer setting End time
Desired time90 minutes
■Listening to the playback sounds of
portable audio player, etc.
1Use a connection lead to connect the portable audio player etc.
to the AUDIO IN socket.
2Press the ON/STAND-BY button to turn the power on.
3Press the AUDIO IN button.
4Play the connected equipment.
If volume level of the connected device is too high, sound
distortion may occur. Should this happen, lower the volume of
the connected device.
If volume level is too low, increase the volume of the connected
device.
■Headphones
MICRO COMPONENT SYSTEM
MICRO COMPONENT SYSTEM
XL-MP15
XL-MP15
PHONES
PHONES
ON/ STAND-BY
ON/ STAND-BY
REMOTE
REMOTE
SENSOR
SENSOR
AUDIO IN
AUDIO IN
PRESET
PRESET
PHONES
PHONES
AUDIO IN
AUDIO IN
Portable audio player, etc.
Audio cable
(not supplied)
XL-MP15H AUS 01-16.fm
15
2009June11
Troubleshooting chart
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc in the unit until normal playback is
possible (about 1 hour). Wipe off any condensation on the
transmitter with a soft cloth before operating the unit.
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1Set the unit to the stand-by mode and turn the power on again.
2If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
1Press the ON/STAND-BY button to enter the power stand-by
mode.
2Press and hold TUNING/FOLDER and press ON/STAND-BY
button on main unit. “RESET” appear.
Caution:
This operation will erase all data stored in memory including clock,
timer setting, tuner preset and CD programme.
Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the unit
with discs left inside can damage the unit.
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD
collection and player.
●Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
●Keep your discs away from direct sunlight, heat, and excessive
moisture.
●Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
■General
Symptom Possible cause
●The clock is not set to
the correct time.
●Did a power failure occur?
Reset the clock. (Refer page 7)
●When a button is
pressed, the unit does
not respond.
●Set the unit to the power stand-
by mode and then turn it back
on.
●If the unit still malfunctions,
reset it. (Refer page 15)
●No sound is heard. ●Is the volume level set to
“MIN”?
●Are the headphones
connected?
●Are the speaker wires
disconnected?
■CD player
Symptom Possible cause
●Playback does not start.
●Playback stops in the
middle or is not
performed properly.
●Is the disc placed upside
down?
●Does the disc satisfy the
standards?
●Is the disc distorted or
scratched?
●Playback sounds are
skipped, or stopped in
the middle of a track.
●Is the unit located near
excessive vibrations?
●Is the disc very dirty?
●Has condensation formed
inside the unit?
■Remote control
Symptom Possible cause
●The remote control does
not operate.
●Is the AC power lead of the unit
plugged in?
●Are the batteries polarity
correct?
●Are the batteries dead?
●Is the distance or angle
incorrect?
●Does the remote control sensor
receive strong light?
■Tuner
Symptom Possible cause
●The radio makes
unusual noises
continuously.
●Is the unit placed near the TV or
computer?
●Is the FM aerial or AM loop
aerial placed properly? Move
the aerial away from the AC
power lead if it is located
nearby.
■Condensation
■If problem occurs
■Factory reset, clearing all memory
■Before transporting the unit
■Care of compact discs
YES
Correct
NO
8
7
6
5
4
3
2
1
XL-MP15H AUS 01-16.fm
16
2009June11
Maintenance
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
●Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
●Do not apply oil to the inside of the unit. It may cause
malfunctions.
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
■Cleaning the cabinet
■Cleaning the CD pickup lens
Do not touch the laser
pickup lens. If finger prints
or dust accumulate on the
pickup, clean it gently with
a dry cotton swab.
MICRO COMPONENT SYSTEM
MICRO COMPONENT SYSTEM
XL-MP15
XL-MP15
PHONES
ON/STAND BY
ON/STAND BY
REMOTE
REMOTE
SENSOR
SENSOR
AUDIO IN
PRESET
■General
Power source AC 220 - 240 V ~ 50/60 Hz
Power consumption Power on: 15 W
Power stand-by: 0.6 W(*)
Dimensions Width: 200 mm (7-7/8")
Height: 137 mm (5-3/8")
Depth: 210 mm (8-1/4")
Weight 1.5 kg (3.3 lbs.)
(*) This power consumption value is obtained when the main unit
is in stand-by mode.
■Amplifier
Output power MPO: 12 W (6 W + 6 W) (10% T.H.D.)
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
RMS: 8 W (4 W + 4 W) (1% T.H.D.)
Output terminals Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Input terminals Audio In (audio signal):
250 mV/47 k ohms
■CD player
Type 1 disc top loading
Signal readout Non-contact, 3-beam semiconductor
laser pickup
D/A converter Multi bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
■Tuner
Frequency range FM: 87.5 - 108 MHz
AM: 522 - 1620 KHz
Other Maximum station can be stored is 40
preset.
■Speaker
Type 1-way type speaker system
10 cm (4") Full Range
Maximum input
power
10 W
Rated input power 5 W
Impedance 4 ohms
Dimensions Width: 135 mm (5-5/16")
Height: 160 mm (6-14/64")
Depth: 165 mm (6-1/2")
Weight 0.87 kg (1.92 lbs.)/each
04/1/28 XL-MP15H_MEmo
MEMO
04/1/28 XL-MP15H AUS Back
92L410CM813021
09F R AS 1
SHARP CORPORATION OF
AUSTRALIA PTY. LIMITED
ABN 40 003 039 405
1 Huntingwood Drive
Huntingwood NSW 2148
SHARP CORPORATION OF
NEW ZEALAND LIMITED
59 Hugo Johnston Drive
Penrose, Auckland
SPform014 (JUNE 2004)
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand
For your reference, please enter the particulars of your purchase below and retain,
with your purchase documentation.
Model No.
Serial No.
Date of Purchase
Retailer
Consumer Electronic Products
Congratulations on Your Purchase!
WARRANTY
IMPORTANT
DO NOT RETURN THIS DOCUMENT TO SHARP
This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months
from the date of original purchase.
If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.
These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
The owner is responsible for any transportation and insurance costs if the product has to be returned for repair.
This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not
attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury
caused by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage,
vermin infestation, software, or any alterations made to the product which are not authorised by Sharp.
Please retain your sales documentation, as this should be produced to validate a warranty claim.
This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and
remedies under any relevant legislation in the country of sale.
04/1/28 XL-MP15H AUS Back
FOR LOCATION ENQUIRIES WITHIN
AUSTRALIA
REGARDING YOUR LOCAL
SHARP APPROVED SERVICE CENTRE
VISIT OUR WEBSITE AT
www.sharp.net.au
OR CALL SHARP CUSTOMER CARE
1300 135 022
SHARP CORPORATION OF AUSTRALIA PTY LTD
(LOCAL CALL COSTS APPLY WITHIN AUSTRALIA)
FOR LOCATION ENQUIRIES WITHIN
NEW ZEALAND
REGARDING YOUR LOCAL
SHARP CORPORATION OF NEW ZEALAND LIMITED
VISIT OUR WEBSITE AT
SHARP CUSTOMER SERVICES
TELEPHONE: 09 573 0111
FACSIMILE: 09 573 0113
SHARP APPROVED SERVICE CENTRE
www.sharp.net.nz
CONTACT YOUR SELLING DEALER/RETAILER
OR CALL
SPform019(JUNE 2004)

Navigation menu