Sharper Image 206078

User Manual: Sharper Image Portable Ice Maker @ Sharper Image

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadSharper Image  206078
Open PDF In BrowserView PDF
PORTABLE ICE MAKER
Item No. 206078

Owner’s Manual

Thank you for purchasing the Sharper Image Portable Ice Maker.
Please read this guide carefully and keep it for future reference.

FEATURES
1. Rubber stopper
2. Water tank
3. Compressor
4. Plug and power cord
5. Front lid
6. View window
7. Back front cover
8. Control Panel
9. Water tray
10. Evaporator
11. Ice shovel
12. Ice basket

SPECIFICATIONS
Daily ice output:

Approx. 22 lbs. in 24 hours

Ice storage capacity:

1.3 lbs.

Compressor:

High efficiency CFC free R134a

Water reservoir capacity: 1.8 Qts.
Dimensions:

14” L x 9.5” W x 13” H

Voltage:

AC 220-240V/50Hz

Power cord:

60” length with 3-prong safety plug

-1-

IMPORTANT: BEFORE USING YOUR PORTABLE ICE MAKER FOR THE FIRST TIME
1. Do not turn this device upside down, as this may damage the compressor.
2. Place device on a flat level surface. Allow 6” of space on the top, back and sides for
proper ventilation.
3. Let the device sit for at least 2 hours, with the front lid open.

CONTROL PANEL OPERATION
ON/OFF: Turns unit ON or OFF.
ICE FULL: This light will come on with a
“BEEP-BEEP” noise when the ice has reached
the maximum capacity of the storage cabinet.
Remove ice with the scoop and press ON/OFF
to resume ice making.
ICE: This light will turn solid green when the ice
is being made.
ADD WATER: This light will come on with a long “BEEP” noise when the reservoir is empty. If you wish
to make more ice, turn the device off, add water and turn it back on.

OPERATING INSTRUCTIONS
1. Open the lid and fill the reservoir with water. Use clean, potable water only. (NOTE: Make sure the
water level in the water reservoir is not over the ice collecting tray.)
2. Plug the device into an AC outlet.
3. Press the ON/OFF button to turn the unit on. The ice maker begins to work and the the ICE button
will light up constant green.
4. The first batch of ice will be ready in approximately 10 minutes. (NOTE: For the first three cycles,
the ice may be small and irregular in size. This is normal. Due to fast freezing, ice cubes may
appear “Cloudy.” This is air trapped in the water and will not affect quality or taste of ice.)
IMPORTANT: If there is water in the reservoir but no ice is being made, there may be air in the line.
Remove the rubber stopper to let a few drops of water out. The rubber stopper is accessible from
inside the reservoir.
5. When the ice tray is full, you will hear a “BEEP-BEEP” noise, and the ICE FULL light will illuminate.
Please remove some ice with the scoop. Press ON/OFF to resume making ice. Do not allow the ice
tray to overfill.
6. Although this unit makes ice, it is NOT a freezer. Ice that is left in this device will melt and then be
re-frozen. You must remove the ice as it is made, and store it in a freezer or cooler.

-2-

OPERATING INSTRUCTIONS (CONT.)
(NOTE: If the compressor stops for any reason such as water shortage, too much ice, power failure,
etc. do not start the system right away. Wait 3 minutes, and then re-start the ice maker.)
CAUTION: It is normal for the compressor and condenser surface to become warm or hot. Please
exercise caution, and make sure there is proper ventilation (at least 6” around the top, back and
sides).
CAUTION: This device is not a toy. Keep out of reach of children at all times.

CARE AND MAINTENANCE
• Wipe the inside and allow to air dry thoroughly after every use.
• Do not allow water to stagnate inside the device.
• Clean the interior with a diluted solution of water and vinegar.
• Do not immerse in water.
• Do not spray ice maker with chemicals.
• Rinse thoroughly before starting. Remove the rubber stopper and allow excess water to drain
out the bottom.

TROUBLESHOOTING
PROBLEM
“ADD WATER” light is on.

POSSIBLE CAUSE
1. Water level too low.
2. There is air in the line.

SUGGESTED SOLUTIONS
1. Press the ON/OFF button, fill reservoir
with water. Wait 3 minutes and press
the ON/OFF button to restart. When the
water has reached the fill line, the ice
maker will restart automatically.
2. Remove the rubber stopper and let
several drops water runs out.

The ice cubes are too large / ice cubes
are sticking together.

Ice from previous cycles is left in the
water tray.

Turn the unit OFF and allow ice in the
system to melt.

The “ICE FULL” and “ADD WATER” lights
are on simultaneously.

Water tray is blocked by an ice cube.

Clear the ice cube from under the ice
shovel.
Remove the plug from the AC outlet and
plug it back in.
Press the “ON/OFF” button. The machine will restart within two minutes.

-3-

WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. If you require any assistance with your Portable Ice Maker,
please call 1 (877) 210-3449.

The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.

-4-



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42
Create Date                     : 2017:06:01 12:59:36-04:00
Metadata Date                   : 2017:06:01 12:59:37-04:00
Modify Date                     : 2017:06:01 12:59:37-04:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:304e432d-aeac-ac4f-ad0c-e566eab6adf5
Original Document ID            : xmp.did:e0828687-b35e-4211-94ad-c7c3f53a9d45
Document ID                     : xmp.id:0b7bd072-0275-441c-9f66-929f0688e958
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:6754dab6-e5bf-4265-b011-ade99128b919
Derived From Document ID        : xmp.did:7142262f-6ba5-4cb0-9ab2-b9b6b3a32b8f
Derived From Original Document ID: xmp.did:e0828687-b35e-4211-94ad-c7c3f53a9d45
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:06:01 12:59:36-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 4
Creator                         : Adobe InDesign CC 2017 (Macintosh)
EXIF Metadata provided by EXIF.tools

Navigation menu