Sharper Image 206083 Lighted Drone User Manual
Sharper Image Lighted Drone
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3669998 |
| Application ID | TQVcGV41juYbxwZvqLEBsg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 62.61kB (782626 bits) |
| Date Submitted | 2017-12-11 00:00:00 |
| Date Available | 2017-12-11 00:00:00 |
| Creation Date | 2017-08-11 08:29:45 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2017-11-22 15:19:04 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 2017 (Macintosh) |
LIGHTED DRONE Owner’s Manual Thank you for purchasing the Sharper Image Lighted Drone. Please read these instructions prior to using this device for the first time. In addition, please store this guide for future reference. FEATURES • • • • • Indoor/outdoor use Built-in gyroscope for smoother flights LED directional lights 164-ft. flight range Dimensions: 142mm L x 142mm W x 37.5mm H • Weight: 63g • Powered by a rechargeable 3.7V 500mA lithium battery (included) • Transmitter requires 4 AAA batteries (included) • 360° rolls and stunt flips • Headless mode (easier for beginners) • Auto hover • 2 speed modes (Hi/Low) • Charge time 90 minutes • Flight time 5 minutes TRANSMITTER DESCRIPTION A. Power indicator LED B. Speed button C. Headless mode on/off D. Throttle lever E. Start/landing F. Power on/off G. Stunt flip button H. Front/back trimming I. Left/right trimming J. Directional lever K. Button not used for this model -1- CHARGING THE DRONE BATTERY 1. Turn power off on the drone (switch on bottom of aircraft). 2. Open the battery compartment and carefully remove battery. 3. Disconnect the battery from the battery cable. 4. Connect the other end of the charging cable to a computer USB port. 5. Plug the USB charging cable into the battery. 6. An LED on the charging cable will off, indicating that the battery is being charged. 7. When the battery is fully charged (about 1.5 hours), the LED will turn on. 8. Disconnect the battery from the charging cable when it is fully charged. Do not overcharge. INSERT BATTERIES IN TRANSMITTER 1. Open the battery compartment on the transmitter. 2. Insert 4 AAA batteries (included), being careful to follow the polarity diagrams inside the compartment (“+” or “-”). 3. Close the compartment. NOTE: We recommend alkaline batteries. Always use fresh batteries. For best results, do not mix old and new batteries. PAIRING THE DRONE WITH THE TRANSMITTER 1. 2. 3. 4. Turn the drone power on. Place the drone on a flat, level surface, with the tail end (green LEDs) pointed toward you. Press the power button on the transmitter. You will hear a beep. Push the throttle level (left stick) to the highest position, then pull it straight down to the lowest position. You will hear one beep for each throttle movement. 5. When the drone LEDs stop flashing and remain on, you have successfully paired the drone with the transmitter. NOTE: It is possible to fly two or more of these drones together, however they must be paired one at a time. LIFTOFF AND LANDING 1. To lift off, press the “START/LANDING” button to start the aircraft. At this time, the motors of the aircraft will be running slowly. Push the throttle lever upward to increase power and take off. -2- LIFTOFF AND LANDING (CONT.) EMERGENCY STOP: If you need to stop immediately, pull the throttle lever down and to the left. At the same time, pull the directional lever down and to the right. The aircraft will stop quickly. HEADLESS MODE Headless mode makes this drone easier for beginners to fly, because there is no specified “front end” or “rear end.” In Headless Mode, when you bank left, the drone banks left. When you bank right, the drone banks right, regardless of what direction the the colors are facing. To turn on Headless Mode: 1. Start with the drone on a flat, level surface, with the green LEDs facing you. 2. Press the Headless Mode On/Off button. 3. You will hear continuous beeps. This means you are in Headless Mode. Now you may liftoff as described earlier. 4. To exit Headless Mode, press the Headless Mode On/Off button once more. You will hear one beep, and the drone will return to normal flight mode. CONTROLLING THE DRONE -3- ROLLING AND TUMBLING STUNT FLIPS TRIMMING AND CALIBRATING THE DRONE AUTO HOVER MODE When you reach your desired altitude, release the throttle lever to maintain the altitude in auto hover mode. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, -4- FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposurere quirement. The device can be used in portable exposure condition without RF striction. WARRANTY/CUSTOMER SERVICE Sharper Image branded items purchased from SharperImage.com include a 60-day limited replacement warranty. For Customer Service, please call 1(877) 210-3449.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2017:08:11 08:29:45-04:00 Creator : Adobe InDesign CC 2017 (Macintosh) Modify Date : 2017:11:22 15:19:04+08:00 Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2017:11:22 15:19:04+08:00 Creator Tool : Adobe InDesign CC 2017 (Macintosh) Thumbnail Width : 200 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 16095 bytes, use -b option to extract) Instance ID : uuid:c12da754-5d27-4eb8-93d6-b930c99cac37 Original Document ID : xmp.did:e0828687-b35e-4211-94ad-c7c3f53a9d45 Document ID : xmp.id:9f6e0d14-cd9c-488e-8e9e-64e891af1c0e Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:c5a8134d-fbd5-480b-8be1-e5167efd2d93 Derived From Document ID : xmp.did:aa373fea-4a85-4c82-9ce9-de7e501a0cb0 Derived From Original Document ID: xmp.did:e0828687-b35e-4211-94ad-c7c3f53a9d45 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Macintosh) History Changed : / History When : 2017:08:11 08:29:45-04:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 215.900000 Max Page Size H : 279.400000 Max Page Size Unit : Millimeters Font Name : Geogrotesque-LightItalic, Geogrotesque-Regular, Geogrotesque-Medium Font Family : Geogrotesque, Geogrotesque, Geogrotesque Font Face : Light Italic, Regular, Medium Font Type : Open Type, Open Type, Open Type Font Version : Version 2.001, Version 2.001, Version 2.001 Font Composite : False, False, False Font File Name : Geog-LgIt.otf, Geogtq-Rg.otf, Geogtq-Md.otf Plate Names : Black Swatch Group Name : 默认色板组 Swatch Group Type : 0 Page Count : 5 For : Administrator, Title : 206083-Lighted Drone_0726.pdf Bounding Box : 0 0 612 792 Container Version : 11 Creator Version : 16 Image Height : 792 Image Width : 612 Image Size : 612x792 Megapixels : 0.485EXIF Metadata provided by EXIF.tools