Sharper Image 206169
User Manual: Sharper Image Noise Cancelling Bluetooth Headphones @ Sharper Image
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
NOISE CANCELLING BLUETOOTH HEADPHONES Item No. 206169 Owner’s Guide Thank you for choosing the Sharper Image Noise Cancelling Bluetooth Headphones. Please take a moment to read this guide and store it for future reference. FEATURES • • • • • • • Bluetooth 4.1 Noise cancelling technology Pairs easily with all iPhones, iPads, Samsung Galaxies and other Android devices Over 20 hours play time Built-in microphone for hands-free phone calls Includes airline adapter for wired use Includes travel pouch HOW TO CHARGE THE HEADPHONE BATTERY 1. Open the rubber plug on the USB port. 2. Connect the USB port of your headphones with the USB port of your computer, USB charger or etc. Use a suitable USB charging cable for this (type A plug to a type micro B plug). The LED will pulse in white during the charging process. The brightness of the LED indicates the charge status. The brighter the LED, the higher the charge status. Once the battery is fully charged, the LED will illuminate continuously in white. 3. Take the USB charging cable out of the USB port of the headphones and put the rubber plug back in place. The LED will go out. -1- HOW TO CHARGE THE HEADPHONE BATTERY (CONT’D) NOTE: LED will flash in white and a signal tone will sound during low battery level in Bluetooth mode. Before using the headphones, you must fully charge the battery and connect the headset to your Bluetooth device. Charge time is 2.5 hours. BLUETOOTH PAIRING Bluetooth mode only works if no cable has been connected. As soon as you connect the headphones to a USB charger to charge or operate the headphones via a connector cord, Bluetooth mode will automatically be deactivated. You can connect compatible devices such as most smartphones with your headphones via Bluetooth. The audio output of your smartphone is then emitted via Bluetooth. 1. Set the sliding switch to position B or C. The headphones will then be in pairing mode. The LED will blink blue. 2. If the LED doesn’t blink blue, hold the MFB button down for 2 seconds. Pairing mode will now be reactivated and the LED will blink blue. 3. Turn on the Bluetooth function on your device (e.g. smartphone). 4. Your smartphone will search for Bluetooth devices, and “SI Audio” should appear in the detected devices list. 5. Select “SI Audio” from the list. If your device requires the entry of a PIN code, enter the PIN code “0000” set by factory default. A signal tone will sound if the headphones and your Bluetooth device are connected. 6. To terminate the Bluetooth® connection, switch off the Bluetooth function on your device. HOW TO RECONNECT HEADPHONES If your headphones have been previously connected with your smartphone, enabling the Bluetooth function on your smartphone is all you have to do to connect the two devices. HOW TO RESET HEADPHONES To reset the Bluetooth pairing settings, move the sliding switch to position B or C. Hold down the MFB and Vol - simultaneously for approximately 4 seconds. The LED will blink twice in blue and the Bluetooth pairing settings will have been reset. -2- HEADPHONES CONTROL WHILE CONNECTED WITH SMARTPHONES Headphones function Control List Accept incoming call Press MFB once Reject incoming call Press and hold the MFB for 2 seconds End the current call Press MFB once Mute the current call Press both Vol + & Vol - once Hold the current call and accept incoming call Press the MFB once during the incoming call Voice dialing Redial last number Press and hold the MFB for 2 seconds when smart phone is standby Press both Vol + & Vol - for 3 seconds Adjust volume up Press Vol + button Adjust volume down Press Vol - button Play or pause music Press the MFB Once Go to the next track Press & hold the Vol + button for 2 seconds Go to the previous track Press & hold the Vol - button for 2 seconds ACTIVE NOISE CANCELLATION FUNCTION CONTROL Moving the sliding switch on your headphones activates the following functions: • • • Position A: Bluetooth and ANC are disabled. Position B: Bluetooth is enabled (LED is illuminated in blue). Position C: Bluetooth and ANC are enabled (LED briefly blinks blue twice). NOTE: If you connected the headphones via a cable, you can activate the ANC function by moving the sliding switch to position C. SPECIFICATIONS Dimensions: Ear-cup housing dimensions Slider arm dimensions Headband dimensions Headphone weight Speaker type 180*165*80mm 54*74*50mm 58*73*15mm 156*102*21mm around 254.3g Φ40mm, 32 Ω Neodymium Driver -3- SPECIFICATIONS Rated input Power Max. input Power Max. power Frequency response Sensitivity L/R Channel imbalance ANC performance Bluetooth specification Bluetooth solution Bluetooth interface Charger input voltage Battery Play time Time to fully charge 20 mW 30 mW 200 mW 20Hz to 20kHz 88± 3dB (IEC-318 coupler at 1kHz1Mw, ANC ON) / 85± 3dB (IEC-318 coupler at 1kHz1Mw, ANC OFF) ≤3dB at 1KHZ >-18dB V4.1 with Apt-X codec CSR8645 HSP, HFP, A2DP, AVRCP 5V Li-ion Polymer, 610mAh, 3.7V ≥20hrs(While BT & ANC are working at middle volume) 2.5hrs WARRANTY/CUSTOMER SERVICE Sharper Image branded items purchased from SharperImage.com include a 1-year limited replacement warranty. For Customer Service, please call 1 (877) 210-3449. If you have any questions not covered in this Product Manual, please call Sharper Image Customer Service at 1 (877) 210-3449. -4-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c138 79.159824, 2016/09/14-01:09:01 Create Date : 2017:08:25 16:40:22-04:00 Metadata Date : 2017:08:25 16:40:23-04:00 Modify Date : 2017:08:25 16:40:23-04:00 Creator Tool : Adobe InDesign CC 2017 (Macintosh) Instance ID : uuid:27915d10-3e7d-da44-a2d4-47a376da8b50 Original Document ID : xmp.did:e0828687-b35e-4211-94ad-c7c3f53a9d45 Document ID : xmp.id:ec26f350-07f6-4414-8ab9-7d0681f446ef Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:5f0f4e26-02a2-4681-98d1-a305dbe6f672 Derived From Document ID : xmp.did:8a068cc5-426b-4475-b803-171211b9469c Derived From Original Document ID: xmp.did:e0828687-b35e-4211-94ad-c7c3f53a9d45 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Macintosh) History Changed : / History When : 2017:08:25 16:40:22-04:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 4 Creator : Adobe InDesign CC 2017 (Macintosh)EXIF Metadata provided by EXIF.tools