Sharper Image Si868 Users Manual SI868_ IM_120x120

SI868 Fl_Gd_Fn_r_P_BC0B9F58C7E5F0DED5ADD76A411A5BFF

SI868 to the manual 37cc2c3a-c737-4e44-956e-ebd88647b483

: Sharper-Image Sharper-Image-Si868-Users-Manual-388404 sharper-image-si868-users-manual-388404 sharper-image pdf

Open the PDF directly: View PDF .
Page Count: 7

Deluxe Spire™

Feel-Good Fan®

with Remote

Temperature Sensor and

Negative-Ion Feature™

SI868 Instructions

Read and save these instructions.

SI868_ IM_120x120.indd 1 3/31/05 10:55:22 AM

Dear Sharper Image Customer,

Thank you for your purchase of a Sharper Image product. We

appreciate your business very much.

This item was created by Sharper Image Design, our company’s own

product development group. Please accept my personal assurance of

your complete satisfaction with this product’s quality and performance.

We offer generous return privileges and excellent warranties on all

our products.

For more than 25 years, The Sharper Image has shared the fun of

discovering innovative products that make life better and more enjoy-

able. We’ve been in business a long time because we are an exciting place

to shop and — just as importantly — we strive to deliver great customer

service that exceeds your expectations.

Enjoy your purchase!

Respectfully,

Richard Thalheimer

Founder, Chairman and Chief Executive Officer

•This appliance operates at 120V AC and 60 Hz only.

• Plug is polarized with one blade wider than the other. The plug

is only designed to fit in a polarized outlet. Do not attempt to

defeat this safety feature.

• To prevent risk of fire, electric shock or injury, do not use near

or in a window.

•Unplug from outlet when not in use and before servicing.

•Use only as described in this user manual.

• Do not use if cord or plug appears to be damaged. If the appliance

is not working properly, or has been dropped, damaged, left

outdoors or dropped into water, return it to a service center or

to the original place of purchase.

• Do not pull, lift, or carry by the power cord. Do not use the

cord as a handle, close a door on the cord or pull the cord

around or against sharp edges or corners.

•Keep the cord away from heated surfaces.

WARNING: To reduce the risk of fire, electric shock,

or injury when using any electrical appliance, basic

precautions should always be followed, including:

READ AND SAVE THESE INSTRUCTIONS

Call 1-800-344-4444 for 24-7 ordering and customer service,

or go to , our complete online store.

SI868_ IM_120x120.indd 2-3 3/31/05 10:55:23 AM

General Instructions

Remote Control

Runs on 2 AA batteries

Diagram of Parts

Control Panel

LED Display

Rear Grill Release

Pillar

Base

Front Grill Release

Rear Grill Release Front Grill

WARNING: To reduce the risk of fire, electric shock,

or injury when using any electrical appliance, basic

precautions should always be followed, including:

IMPORTANT: If the fan does not operate, check that the front

and rear grills are locked into place. To prevent injury, power is

disconnected when the grills are unlocked or removed.

• Damaged power cord must only be replaced by qualified

service personnel. There are no user-serviceable parts inside

the unit. Any attempt to open the unit will void the warranty

and could lead to serious damage to the unit and/or personal

injury to the operator.

•Before unplugging unit from outlet, turn off all controls.

• Do not unplug by pulling the cord. Grasp the plug itself, not the

cord, when unplugging from an outlet.

• Fan should be placed on a flat surface when in use. Use only

when fan is vertical.

• Keep all openings free of dust, lint or anything that may

reduce airflow.

• Do not operate the unit in areas where flammable or combus-

tible products or vapors may be present.

•Do not place fan in a damp place or where humidity is very

high (such as in a bathroom).

•For indoor use only.

READ AND SAVE THESE INSTRUCTIONS

SI868_ IM_120x120.indd 4-5 3/31/05 10:55:24 AM

Guide the power cord between the

two pillar sections. Make sure the

smaller ends are facing the fan, then

snap the pillar sections together.

Align the pegs of one half of the base

with the holes in the other. Assemble

the base by sliding the halves together.

Guide the power cord through the

hole in the base.

Align the pegs on the base with the

hole at the bottom of the pillar and

attach the base to the pillar with the

large nut.

Attach the pillar and base assembly to

the fan and lock them in position by

sliding the four latching locks inward.

Run the cord through the groove at

the bottom of the base.

The Fan has five parts. Two tall pieces comprise the pillar and two

larger pieces are the base. The fan itself is the fifth part.

Assembly

Large Base Nut

Locks base to pillars.

Notch Key

Align by matching key

on pillar to notch/

groove on fan.

POWER

Toggles the unit ON and OFF.

IONS

Toggles the negative ionizer circuit ON/OFF.

SPEED

Adjusts the fan speed.

ROTATE

Switches between moving and stationary.

TIMER

Sets fan to operate for a period of time. Press

repeatedly to program the length of time the

unit should run. LED lights will indicate .5h, 1h,

2h and 4h. Example: The fan will shut off in

3.5 hrs. if .5h, 1h and 2h are simultaneously lit.

The buttons on the wireless remote and the control panel are

identical (except for the temperature feature) and correspond to

the same commands. Corresponding LEDs on the front panel

Illuminate to indicate settings.

Basic Operation

SI868_ IM_120x120.indd 6-7 3/31/05 10:55:26 AM

Operation

Note: If you change settings on the fan control panel, it does

not update or change your remote display.

For example, if you turn the fan off at the control panel, the

remote will still indicate that the fan is on. In this situation, you

would need to press POWER on the remote twice to turn the

fan back on.

MODE

Select from three wind

simulation patterns:

Constant - No fluctuation in

wind intensity.

Natural - Changes in air flow

to simulate natural breezes.

Sleep - Gentle and subtle

shifts in air flow.

Mode Button

Fresh Air and Negative Ions

One of the distinct differences between “fresh” outdoor air and

“stale” indoor air is the balance of negative ions vs. positive ions.

Outdoor air has high concentrations negative ions — specifically,

oxygen molecules with an extra electron attached — and relatively

few positive ions (oxygen with an electron stripped away).

High concentrations of negative ions are found in the most

invigorating outdoor places — evergreen forests, around waterfalls,

on beaches with crashing surf or anywhere after thunderstorms,

when the air seems almost crisp and spicy with freshness!

At the other extreme, positive ions are found in high concentrations

inside closed, air-conditioned and heated buildings, and outdoors

in cities during rush hours (pollution depletes negative ions).

Many believe that this balance of negative ions versus positive

ions may someday be controlled indoors — just as we currently

regulate indoor air’s humidity and temperature. In this way, we

would hope to restore our homes and work environments to

something more like those refreshing outdoor places.

Sharper Image Design’s Feel-Good Fan® — with its negative-ion

feature — is a step in that direction.

SI868_ IM_120x120.indd 8-9 3/31/05 10:55:29 AM

Temperature Control

Use the remote control to set a desirable temperature point for the

fan. Although there is a temperature readout on the remote itself,

the measurement that controls the fan is taken at the fan. This

way, if the remote is left in direct sunlight, next to a window and

getting a false reading, it will not affect the operation of the fan.

The fan stops and starts automatically according to the room

temperature as measured at the fan.

To activate the fan and display, press

POWER.

To activate automatic monitoring,

press AUTO.

To display the set temperature and

raise or lower it, press the TEMP +

or – button.

Once the set temperature is reached,

the fan will switch off.

To cancel and resume full-time

operation, press AUTO.

TEMP Settings

Unplug the unit before cleaning and allow it to dry before

returning the plug to the power outlet.

The exterior of the unit and the remote control can be cleaned

using a soft cloth or sponge, and a mild solution of dishwashing

detergent.

The front and rear grills can be

taken off the main housing for

easy removal of any dust col-

lected on the grills or interior

of the fan.

Press the two release buttons

on the side of the rear grill to

unlock it from the housing.

A release latch for the front grill

is hidden at the bottom. Pull the

latch forward to unlock the grill.

Use a vacuum to remove visible

dust from the grills and interior.

Rear Grill Release

Front Grill

Release Latch

Hidden below

grill edge.

Cleaning Instructions

SI868_ IM_120x120.indd 10-11 3/31/05 10:55:34 AM

What Is Covered

This warranty covers any defects in materials or workmanship, with the exceptions stated below.

How Long Coverage Lasts

This warranty runs for one year from the date of original purchase.

What Is Not Covered

This warranty does not cover damage caused by misuse or use other than as intended and described

in the product instruction manual, or loss or damage to batteries or removable parts.

What The Sharper Image Will Do

The Sharper Image will repair any defects in materials or workmanship. In the event repair is not

possible, The Sharper Image will either replace this product with one of similar features and price,

or refund the full purchase price of the product, whichever you prefer.

How to Obtain Service

Return the product and receipt, along with a brief explanation of the problem, to:

T.S.I. - Returns Department

2901-A West 60th Street

Little Rock, AR 72209

If you have questions please feel free to contact our customer service representatives at 1-800-344-5555

or by email at care@web.sharperimage.com.

This warranty gives you specific legal rights, and you may have other legal rights that vary from state to state.

© 2005 Sharper Image Corporation

Sharper Image Corporation

650 Davis St., San Francisco, CA 94111

(415) 445-6000

Shop online:

Due to continuing improvements, actual product may differ slightly from the product described herein.

V2 03/05

One-Year Warranty

SI868_ IM_120x120.indd 12 3/31/05 10:55:38 AM