Sheenway Asia 45604A Z-wave Outdoor Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	949465
Application ID	UtpFk4fKHNFkKXVGfvWwKQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.26kB (78195 bits)
Date Submitted	2008-05-31 00:00:00
Date Available	2008-06-03 00:00:00
Creation Date	2007-04-04 19:15:16
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-04-04 19:15:16
Document Title	Microsoft Word - ZRP110_45604_ Outdoor Module Instructions.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	HP_Owner

45604 Instructions, Revision a.4
4/4/2007 7:15:06 PM
45604
Z-Wave, RF Controlled, 600W, 120 VAC, Outdoor Module
Thank you for your purchase of a GE SmartHome™ Z-Wave® control device. Z-Wave technology is designed to
automate lighting/home control and provide easy remote operation of all your Z-wave enabled devices. The GE ZWave product family includes a variety of devices to enable and control lighting in your home. It is up to you whether
you want to control one room or your entire house and whether you want to do it all now or start with one room and
add more over time.
This module is one component of a Z-Wave® control system and is designed to work with all other Z-Wave enabled
devices in a home control network. It will also act as a wireless repeater to insure that commands intended for another
device in the network are received, thereby extending the range of the wireless controller. Z-Wave devices of other
types and brands can be added to the system and will also act as range extenders if they support this function of
repeating the signal received to other nodes in the system.
The device plugged into the Z-Wave controlled outlet on this module must not exceed 600 watts (Incandescent); 15
Amps, 1800W (Resistive); or ½ HP (Motor).
There are no user serviceable parts in this unit.
Key Features
•
•
•
One Z-wave remote controlled AC outlet
o Remote ON/OFF control via the Z-Wave controller
o Manual ON/OFF control with the pushbutton
Weather and impact resistant housing; Suitable for use outdoors in damp or wet conditions
Integrated outlet cover keeps dirt & debris out when the module is not in use
Basic Operation
Manual Control
The Pushbutton on the 45604 Appliance Module allows the user to:
1. Manually turn the connected equipment ON or OFF by pressing the button.
• This is a toggle switch; if the device is OFF, pressing the button turns the device ON and vice versa.
2. Include or exclude the module from the Z-Wave home control network.
• Refer to the instructions for your primary controller to access the network setup function and include or
exclude devices.
• When prompted by your primary controller, tap the button.
• The primary controller should indicate that the action was successful. If the controller indicates the action
was unsuccessful, please repeat the procedure.
• Once the module is part of the network, the same basic procedure is used to add the module to groups or
scenes. Refer to the primary controller’s instructions for details.
Page 1 of 3
45604 Instructions, Revision a.4
4/4/2007 7:15:06 PM
Please Note: After a power failure, the 45604 module defaults to OFF.
ADVANCED OPERATION
The following Advanced Operation parameters require that you have an advanced controller like the GE model 45601
LCD remote. Advanced remotes from other manufacturers may also be able to change these settings; however, basic
remotes do not have this capability.
All On/All Off
Depending upon your primary controller, the 45604 outdoor module can be set to respond to ALL ON and ALL OFF
commands in up to four different ways. Some controllers may not be able to change the response from its default
setting. Please refer to your controller’s instructions for information on whether or not it supports the configuration
function and if so, how to change this setting.
The four possible responses are:
• It will respond to ALL ON and the ALL OFF command (default).
• It will not respond to ALL ON or ALL OFF commands.
• It will respond to the ALL OFF command but will not respond to the ALL ON command.
• It will respond to the ALL ON command but will not respond to the ALL OFF command.
Restoring Factory Defaults
All network settings and configuration parameters can all be restored to their factory default settings by using your
master controller to reset the device. Please note: The GE Model #45601 controller is designed to do this. Use
the controller’s “Setup / Reset Unit” menu to restore defaults. Not all controllers are capable of this; your
controller must be designed to perform this function.
Software Fuse
This Outdoor Module is designed to protect itself against loads that exceed its maximum power rating. An overload is
automatically sensed by the module and all power to the load is shut OFF immediately.
Troubleshooting: Verify that the load does not exceed the module’s maximum rating if the module doesn’t seem to
work properly. Normal operation should be restored when the load is reduced to the proper rating.
Over-Current Protection
Additional over-current protection is provided by an internal fuse which is not user serviceable. Check your home’s
circuit breakers before concluding that the product must be replaced.
Interoperability with Z-Wave™ Devices
A Z-Wave™ network can integrate devices of various classes, and these devices can be made by different
manufacturers. Although every Z-Wave certified product is designed to work with all other Z-Wave certified products,
your controller must include the appropriate device classifications in order to control non-lighting Z-wave devices. As
an example, the GE 45600 basic remote is designed only for controlling Z-Wave devices using the lighting control
classification. The GE 45601 deluxe remote with LCD readout can control other Z-Wave certified devices like
thermostats as well as lighting.
WARRANTY
JASCO Products warrants this product to be free from manufacturing defects for a period of two years from the original
date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not
extend to consequential or incidental damage to other products that may be used with this product. This warranty is in
lieu of all other warranties, expressed or implied. Some states do not allow limitations on how long an implied warranty
lasts or permit the exclusion or limitation of incidental or consequential damage, so the above limitations may not apply
to you. This warranty gives you specific rights, and you may also have other rights which vary from state to state. If
the unit should prove defective within the warranty period, return prepaid with dated proof of purchase to:
Page 2 of 3
45604 Instructions, Revision a.4
4/4/2007 7:15:06 PM
JASCO Products Company
10 E. Memorial Rd.
Oklahoma City, OK 73114
CERTIFICATIONS
UL Listed – Add Details
FCC Information
The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph:
The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment uses, generates and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful interference to radio communication. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Operation is subject to the following two conditions:
• This device may not cause interference and
• This device must accept any interference, including interference that may cause undesired operation of the
device.
Important Note: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the
device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure
requirements and void user’s authority to operate the device.
SPECIFICATIONS
Power 120VAC, 60Hz
Signal (Frequency) 908.42 MHz
Maximum Load for the Z-Wave controlled outlet: 600W Incandescent, ½ HP Motor or 1800W (15A) Resistive
Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module.
Operating Temperature Range: 14 to 140° F (-10 to 60° C)
For outdoor use in dry, damp or wet locations
Z-Wave is a registered US trademark of Zensys A/S
SmartHome is a trademark of JASCO Products
Page 3 of 3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2007:04:04 19:15:16+08:00
Create Date                     : 2007:04:04 19:15:16+08:00
Format                          : application/pdf
Title                           : Microsoft Word - ZRP110_45604_ Outdoor Module Instructions.doc
Creator                         : HP_Owner
Document ID                     : uuid:b2124aa0-0050-42aa-a749-88d92d04f3e0
Instance ID                     : uuid:1d46cf19-960f-421e-ad8d-04478b82fd32
Page Count                      : 3
Author                          : HP_Owner

EXIF Metadata provided by EXIF.tools