Sheenway Asia ZB4101 Wireless relay User Manual 45853 Word Draft

Download:
Mirror Download [FCC.gov]
Document ID	2089825
Application ID	wuKmzqNvuXtKOaQidny0Ig==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	181.4kB (2267467 bits)
Date Submitted	2013-10-17 00:00:00
Date Available	2013-10-17 00:00:00
Creation Date	2013-08-16 16:05:15
Producing Software	Acrobat Distiller 10.0.0 (Windows)
Document Lastmod	2013-10-08 10:21:01
Document Title	Microsoft Word - 45853 Word Draft
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ekiner

45853
(ZB4101))
ZB4101 (45853)
ZigBee
e®, Plug-In On/Offf Switch
Lamp and
a Small Applian
nce Modu
ule
Home Auttomation Stan
ndard Version
n 1.2 Complia
ant
Introdu
uction
Thank you
u for your purrchase of a Ja
asco ZigBee®
® control devi ce. ZigBee te
echnology is d
designed to
automate lighting/home
e control and provide easy
y remote operration of all yo
our ZigBee en
nabled device
es.
The Jasco
o ZigBee prod
duct family inc
cludes a varie
ety of devicess to control lig
ghting in your home. It is up to
you wheth
her you want to control one
e room or you
ur entire housse and whethe
er you want to
o do it all now
w or
start with one room and
d add more over
time.
ce plugged into the ZigBee controlled
d outlet on th
his module m
must not exc
ceed 600 wattts
The devic
(Incandes
scent); 1800W
W (15A) Resistive or ½3 HP
H Motor. To
otal load capa
acity for both
h outlets is
1800W (15A) Resistiv
ve.
e the risk of electric shock, this product has a ground
ding type plug
g that has a th
hird (groundin
ng)
To reduce
pin. This plug
will only fit into a grou
unding type po
ower outlet. Iff the plug doe
es not fit into tthe outlet, con
ntact
a qualified
d electrician to
o install the proper
outlet. Do not chang
ge the plug in any way.
There are
e no user serv
viceable parts
s in this unit.
! Warn
ning !
RISK OF FIRE
RISK OF ELECTRICA
AL SHOCK
RISK OF BURNS
WARNING
Controllin
ng Appliance
es:
Exercise extreme
caution when usin
ng ZigBee devices to contrrol appliancess. Operation o
of the ZigBee
device ma
ay be in a diffferent room th
han the contro
olled appliancce, also an un
nintentional acctivation mayy
occur if th
he wrong butto
on on the rem
mote is presse
ed. ZigBee de
evices may au
utomatically b
be powered o
on due
to timed event
program
mming. Depen
nding upon the appliance, these unatten
nded or unintentional
operations
s could possibly result in a hazardous.
1. Do Not include ZigBee devices in
n Groups or Scenes
if theyy control appliances.
2. Do Not use ZigBee devices
to control electric heaters or an
ny other applia
ances which may present a
hazardous
s condition du
ue to unattend
ded or uninte
entional or auttomatic powe
er on control.
Over-Currrent Protection
Over-current protection is provided by an internal fuse which is not user serviceable. Check your home’s
circuit breakers before concluding that the product must be replaced.
Key Features







One ZigBee controlled AC outlet
o Remote ON/OFF control via the ZigBee controller
o Manual ON/OFF control with the front panel push button
One Always-ON pass-through AC outlet
Over the Air updates – Once joined to your ZigBee network, the device can transparently receive
updates through your ZigBee gateway
LED Status Indicator – Indicates device scanning during pairing process
Space efficient design
o Does not block the lower outlet when plugged in to the upper outlet of a duplex wall
receptacle. (This assumes that the duplex receptacle is mounted with the ground pin
down.)
o Plugs and cords for connected devices route to the side allowing close placement of
furniture
Grounded 3-wire power connection for safety
Energy Monitoring – The device can report wattage (W) and kilowatt hours (kWh). Energy usage
is monitored through the ZigBee Controller Interface
Basic Operation
The connected light can be turned ON in two ways:
1. Manually with the push button on the module
2. Remotely with a ZigBee Controller
Manual Control
The Front Panel Push button on the Appliance Module allows the user to:
Manually turn the connected equipment ON or OFF by pressing the button. This is a toggle switch; if the
device is OFF, pressing the button once turns the device ON and vice versa.
Remote Control
ZigBee devices can be controlled remotely with a ZigBee Controller or over long distances with a PC or
mobile phone through a gateway connected to your wireless router. To control the device remotely it must
be paired to the ZigBee network.
ZigBee Network Pairing
Pair the Device to the ZigBee Network
1. Plug in appliance to be controlled into the ZigBee controlled outlet on the module
2. Auto-Scan: LED Status Indicator Blinks as the device scans for a compatible network controller to
pair with (IMG Required – Indicates LED blinking while plugged into outlet)
3. Timeout: Auto-Scan mode will eventually time out after the LED Status light stops blinking. The
front panel push-button on the module must be pressed to initiate manual pairing following
timeout.
4. From your controller, choose to add lighting device and enter Locating/Pairing mode as instructed
by the controller
5. After the device is located and paired to the approved ZigBee network, the LED status will stop
blinking and will appear in your controller’s menu.
The module is now paired to the ZigBee network and can be controlled remotely.
Remove from ZigBee Network (Reset Device)
From the ZigBee Controller
From your controller or hub interface, choose to remove or delete the lighting device as instructed. The
device will be removed from the ZigBee network following indication from your controller. All configuration
parameters will be reset after the device is removed from the network.
Manual
To manually remove the device from the ZigBee network:
1.
2.
3.
4.
5.
Unplug the module from the outlet.
Hold down the button.
Plug the module back into the outlet.
Release button within 4 seconds to start the join process for the iControl network.
If user wants to stay with the current network, release button after 4 seconds and before 10
seconds.
WARRANTY
JASCO Products warrants this product to be free from manufacturing defects for a period of two years
from the original date of consumer purchase. This warranty is limited to the repair or replacement of this
product only and does not extend to consequential or incidental damage to other products that may be
used with this product. This warranty is in lieu of all other warranties, expressed or implied. Some states
do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of
incidental or consequential damage, so the above limitations may not apply to you. This warranty gives
you specific rights, and you may also have other rights which vary from state to state. Please contact
Customer Service at 800-654-8483 (option 4) between 7:30AM – 5:00PM CST or via our website
(www.jascoproducts.com) if the unit should prove defective within the warranty period.
FCC
U2ZZB4101
U2ZB4101
The Federal Communication Commission Radio Frequency Interference Statement includes the following
paragraph:
The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment uses, generates, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction, may cause harmful interference
to radio communication. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:




Reorient or relocate the receiving antenna
Increase the separation between the equipmentand receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
Consult the dealer or an experienced radio/TV technician for help
Operation is subject to the following two conditions:
 This device may not cause interference
 This device must accept any interference, including interference that may cause undesired
operation of the device.
Important Note: To comply with the FCC RF exposure compliance requirements, no change to the
antenna or the device is permitted. Any change to the antenna or the device could result in the device
exceeding the RF exposure requirements and void user’s authority to operate the device.
Compliance
and Regulations
The
antenna(s)with
usedIC
forRules
this transmitter
must be installed to provide a separation distance of at least 20 cm from
IC:persons
6924A-ZB4101
all
and must not be collocated or operating in conjunction with any other antenna or transmitter within a
Jasco
Products
Company
host
device,
except
in accordance with FCC multi-transmitter product procedures.
Model: ZB4101(45853)
45853 / ZB4101
CAN device
ICES-3(B)
NMB-3(B)
This
can/ be
expected to comply with Part 15 of the FCC Rules provided it is assembled in
exact accordance with the instructions provided with this kit. Operation is subject to the following
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference
received including interference that may cause undesired operation.
SPECIFICATIONS

Power 120VAC, 60Hz

Complies with FCC and Industry Canada regulations
Compliance
IC Rules
and
Regulations

Signal with
(Frequency)
2.4 Ghz
IEEE
802.15.4
IC: 6924A-ZB4101

Maximum load for the ZigBee controlled outlet: 600W Incandescent, 1/3
½ HPHPMotor
Motororor1800W
1800WResistive
Resistive
Jasco
 Products
MaximumCompany
load for both outlets 15 Amps, 1800W Resistive
Model:
 ZB4101
Operating
Temperature
Range: 32‐104° F (0‐40° C)
For indoor(45853)
use only.
CAN ICES-3(B)
NMB-3(B)
Complies
FCC
For
indoor/with
use
only.and Industry Canada regulations
This
complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
JASCOdevice
Products
following
two conditions:
(1) this device may not cause interference, and (2) this device must accept any
10 E. Memorial
Rd
interference,
including
interference
that may cause undesired operation of the device.
Oklahoma City, OK 73114
www.jascoproducts.com
SPECIFICATIONS
- Power 120VAC, 60Hz
ZigBee® is a registered US trademark of the ZigBee Alliance
- Signal
(Frequency)
2.4 Ghz and
IEEEspecifications
802.15.4 listed in this document are preliminary and subject to change
The
images,
product information
Maximum load for the ZigBee controlled outlet: 600W Incandescent, ½ HP Motor or 1800W Resistive
Maximum load for both outlets 15 Amps, 1800W Resistive
For indoor use only.
Complies with FCC and Industry Canada regulations
JASCO Products
10 E. Memorial Rd
Oklahoma City, OK 73114
www.jascoproducts.com
ZigBee® is a registered US trademark of the ZigBee Alliance
The images, product information and specifications listed in this document are preliminary and subject to change

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 10.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2013:10:08 10:21:01+08:00
Create Date                     : 2013:08:16 16:05:15-05:00
Metadata Date                   : 2013:10:08 10:21:01+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 45853 Word Draft
Creator                         : ekiner
Document ID                     : uuid:16322a1f-1a09-4e0c-b209-5d8046b69a53
Instance ID                     : uuid:9872aa6c-40b9-400b-aefc-fc84149a49d6
Has XFA                         : No
Page Count                      : 4
Author                          : ekiner

EXIF Metadata provided by EXIF.tools