ShenZhen Aoni Electronic Industry HEADSET001 Bluetooth Headset User Manual Manual
ShenZhen Aoni Electronic Industry Co., Ltd. Bluetooth Headset Manual
Manual
Bluetooth Headphone Manual
Thank you for purchasing the stereo Headphone with Bluetooth Wireless technology; we encourage you to read this quick
installation guide thoroughly to get the most of this innovative wireless headphone.
1. Package content:
Headphone; USB cable charger; User manual.
2. Button function:
1. Volume up
2. Next Track
3. Volume down
4. Previous track
5. Play/Pause
6. Power on/off
3. LED Status indicator
·Blue LED flashes very fast indicates the device is powered on and/or connected
·Solid red LED indicates the battery is charging. When the battery has reached full capacity, the solid red LED will go off.
4. Charge your headphone
·Use the supplied USB cable to charge the battery directly from your PC.
·Make sure that your headphone is fully charged before using it for the first time.
·The headphone battery has to be initially charged for at least for 4 hours. Thereafter, the battery will take from 3 to 4 hours
to recharge.
5. Advanced operation
Note: Before installing this product, please make sure your laptop has the built-in Bluetooth feature available. If your laptop
is not bluetooth-enabled, you must purchase a bluetooth dongle, preferably version 2.1 or above.
a. Pairing the headphones with your laptop
2. Activate the bluetooth program in your laptop to begin setup.
3. The “Search new device” screen will be displayed.
4. Place both devices not more than one meter away from each other.
5. Press the power button on the headphone to turn it on. The blue LED will start blinking per second. This indicates that the
headphone has entered pairing mode.
5. You will find the product name “ANS 872” occurs on your laptop, press “pairing”.
6. If the pairing is successful, the blue LED will stay lit.
b. Pairing the headphone with your phone
1. Make sure the headphone is off.
2. Set your bluetooth phone to “discover” the wireless headphone.
3. Place both devices not more than one meter away from each other.
4. Press the power button on the headphone to turn it on. The blue LED will start blinking per second. Press Play/pause
button for about 2 seconds, you will hear “ready to pair”, this indicates that the headphone has entered pairing mode.
5. You will find the product name “ANS 872” occurs on your phone, press “pairing”.
6. If the pairing is successful, the blue LED will stay lit.
Please note: If your laptop/phone device is under version 2.1, please enter the passkey =”0000”(4 zero).
6. Answering and ending a call using your mobile phone
·When there is an incoming call, the headphone will ring.
· Briefly press the power button to answer an incoming call. Music playback pauses temporarily.
·To end a call simply tap the power button once again. As soon as you hang up, music playback resumes automatically.
7. Specifications:
Mic. Spec.:
Microphone Unit: ￠6*5mm
Directivity: omnidirectional
S.P.L: -53±3dB
Impedance: ≤2.2KΩ
Frequency response:20Hz-10,000Hz
Operating Voltage: 4.5
Speaker Spec.:
Speaker diameter:￠40mm
Impedance:32Ω
S.P.L: 114±3dB S.P.L at 1KHZ
Rated power: 20mW
Aggregate capability: 40mW
Frequency response: 20Hz-20,000Hz
Power:
Battery type: Built-in 360mAh Lithium-polymer rechargeable battery
Charging connector type: Micro USB 5V/1A
Run time: Up to 10 hours of talking or music playback time
Standby time: 90 hours
Charging time: 3-4 hours
8. Attention:
1. If you cannot power on the headphone, please check your power and charge it.
2. Please remember to power off the headphone when you are not using it.
3. If you haven’t used the headphone for a long time, pls. charge it before using.
4. Do NOT disassemble, repair or modify the headphone by yourself.
5. Do NOT store the device in a place with high humidity or dust
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.