ShenZhen Chuangqun Audio B13 NB Wireless Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3107120
Application ID	IX42AtbZWAQ0zWYLr+7RBg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.65kB (95590 bits)
Date Submitted	2016-08-22 00:00:00
Date Available	2016-08-22 00:00:00
Creation Date	2016-07-26 10:34:48
Producing Software	Acrobat Distiller 9.3.3 (Windows)
Document Lastmod	2016-07-26 10:34:48
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	anbotek

New Balance Wireless Speaker Operation Manual
Operation Manual
1. Briefly press “
” for TF/Wireless mode or to choose the next song. Press longer to
turn volume up (function is not available in AUX in mode).
2. Briefly press “
” for TF/Wireless mode or to go back to previous song. Press the
button longer to turn volume down (function is not work in AUX in mode).
3. Briefly press “ ” In TF/Wireless mode to Play/Pause/Answer/ or End call dial in
Wireless mode. While in Wireless mode: Double click this button to redial, or hold for 2
seconds to end calls. In TF/AUX mode: press the same button to play TF cards.
Wireless Pairing
 Press ON/OFF button in Wireless mode, blue LED will flash 6 times, then quickly press
Play/Pause button, then blue and red LED will flash alternately.
 Open your Mobile device to its Bluetooth settings and search for Wireless device “S10
Wireless speaker”, select to connect speaker to your mobile device.
 Enter password or PIN 0000, and press “Yes” or “confirm” (Important notice: If the
connection is successful, blue LED will flash. If the pairing is unsuccessful, the LED Blue
and Red will still flash alternately. You will need to pair again).
Flashing Instruction
 Green LED flash: Speaker is in TF card MP3 mode
 Green LED ON: Speaker is in TF card or AUX in mode
 Blue LED flash: Speaker is in Wireless mode
 Red and blue LED flash alternately: Speaker is in Wireless pairing mode with your Mobile
Device/Tablet
 Red LED ON: Speaker is Charging.
 Red LED OFF: Speaker is full charged.
 Red LED Flash: Speaker is on Low power.
Specifications
 Insert the TF card to play music. With the Built‐in TF smart decoder, you can listen to
MP3 directly from a TF card while in TF card mode.
 In AUX mode, it is easy to listen music from any PC, Mobile, Tablet or DMP3/MP4 device
via AUX IN link
 Wireless Hands‐free. Speaker supports hands free calls for wireless.
Notice
 Product is not intended for use by children.
 Handle device with care.
 Device is not meant for use at extreme temperatures. Product performance will suffer in
extreme heat, cold and humidity.
 Do not throw the product into fire or use near open flame.
 Do not block speaker’ face, doing so will muffle speaker sound.
 Tampering or dissembling the device can result in damage to the speaker.
 Warranty excludes natural oxidation in the form of metal of rust, surface spalling or any
other form of natural oxidation.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : anbotek
Create Date                     : 2016:07:26 10:34:48+08:00
Modify Date                     : 2016:07:26 10:34:48+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Format                          : application/pdf
Title                           : <463A5CB0B8BCFEBDF8D0D0D6D05C3031313630373538304920B4B4C8BA20C0B6D1C0D2F4CFE42042313320D6DCB7EAC7EF2D616D792D4643432D49445CD7CAC1CF4F4BA3BF5C55736572204D616E75616C2E646F6378>
Creator                         : anbotek
Document ID                     : uuid:48e45485-ac89-4ff4-a46c-a55c052c240e
Instance ID                     : uuid:438b1ef4-3774-40cf-a8e2-8b8e52c79a4a
Page Count                      : 3

EXIF Metadata provided by EXIF.tools