ShenZhen Esky Trade ESKYSZ01 Radio Control Transmitter User Manual 1 of 2

User Manual 1 of 2

FCC Manual Regulatory Requirement :Part 95C – 72-76MHz Radio

This product may be used for model airplane or surface (boat, car, robot) use, if on the

correct frequency. It is not intended for use in any application other than the control of

model for hobby and recreational purposes.

FCC warning statement:

FCC regulation against to change the

crystal within the transmitter to a different channel. All such transmitter crystal changes

must be performed by a certified radio technician. Failure to properly tune a system to

its new channel may result in decreased range and may also result in interference to

other types of frequency user on adjacent channels. Doing so also voids the usage

authorization. Manufacturer is not responsible for unauthorized modification,

adjustment and replacement of parts on this product .

Exportation precautions:

a. When this product is exported from the country of manufacture, its use is to be

approved by the laws governing the country of destination which govern devices that

emit radio frequencies. If this product is then re-exported to other countries, it may

be subject to restrictions on such export. Prior approval of the appropriate

government authorities may be required. If you are purchased this product from an

exporter outside your country, and not the authorized distributor in your country,

please contact the seller immediately to determine if such export regulations have

been met.

b. Use of this product with other than models may be restricted by Export and Trade

Control Regulations, and an application for export approval must be submitted. In the

US, use of 72MHz (aircraft only), 75MHz (ground models only) and 27MHz (both)

frequency bands are strictly regulated by the FCC. This equipment must not be

utilized to operate equipment other that radio controlled models. Similarly, other

frequencies (except 50MHz, for HAM operators)