ShenZhen Longtour Photology FL41 LED Floor Lamp User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4200102
Application ID	MIWTeH6aefp6cv+sCNRFxA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	253.81kB (3172651 bits)
Date Submitted	2019-03-13 00:00:00
Date Available	2019-03-13 00:00:00
Creation Date	2019-01-21 12:10:10
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2019-03-13 11:23:28
Document Title	Microsoft Word - user manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

©pTECKIN
User Manual
LED Floor Lamp
Infroduction
Thank you for choosing TECKIN FL41 Dimmable LED Floor Lamp. Please read the user
manual carefully and keep it for future reference. If you need further assistance,
please confact TECKIN customer support by email at
support.cu@leckin.co | support.us@leckin.co
Package Contents
==
User Manual
1 x TECKIN FL41 Dimmable LED Floor Lamp
1 x User Manual
Specifications
Model FL41
Rated Power 20W
Input Voltage 100—240V AC S0Hz/60Hz
Adapter Output DC24V, 1A
Type of Light LFD
CeT 3000K
CRI >80Ra
Lumen 2000LM
Material lron+ PC
finish Matt Black
Dimension of light
D250"H1750mm
Safety class
Claass I
Light source life
50000H
02
Product Overview
1. Light Guide Panel
2. Hexible Neck
3. Lamp Pole
4. CCI Confrol And Brightness Bution
5. Lamp Bose
6. Adapter
03
Before Assembly
. Inspect lamp before beginning assembly. Wire connections have been made at
the factory and the lamp is ready for assembly.
Remove all packing materials from the lamp.
. lo prevent bad connections, avoid pulling wiring connections when removing
won
contents from package or during installation.
Lay out all the parts on a flat surface.
The floor lamp consisls of seven parts: 1 x Lamp Head, 5 x Pole, 1 x Lamp Base, 1 x
9 &
Hlectric Wire with Adapter (Refer to Ilustration).
Assembly Insfruction
1. Place the lamp base on flat surlace, then serew each iwo parls clockwise in order.
Note:
1) Please lake care not to pinch or damage the wires.
2) For betfer installation, please tighten the botfom pole and lamp base fitly.
3) Make sure each section of tubes are tightened.
2.Plua adapter into outlet and now the lamp is ready for use.
Adjustment
For best performance, please adjust the lamp position to direclly above your area of
reading/ working.
Note:
1. Please hold the lamp pole when adjusting the angle of the floor lamp.
2. Do nol excessively adjust the angle of lamp head to avoid failure.
Operation Instfruction
1. Product Features / Functions
1) The product is embedded in an smart confrol module that can be connected to
a WIFI nelwork and conlralled by Amazon Echo, Google Home, Tmail El third—party
software.
2) The product can be controlled by mobile APP.
3) The butlon body keeps a one—louch switch, and stepless dimming with the brighiness
of 5%—100%. It also has the memory function. When the light is fumed on again, it will
return to the brighlness when the light was turned off last time. It does nol need
to dim repeatedly.
4) The lamp will ight when it is powered on {100% brighiness}, and mulliple switches
can be funed on/oll by the main swilch.
5) The lampshade has PMMA high—fransmittance, and the lumen can reach to 1500LM.
6) LED uses Epistar chip, and it has a stable light color. The lamp lite can reach 30,000
hours. No blue light hazard.
7) The surface of the lamp body is dull polished and the metal texture is enhanced.
05
1.Manual operation steps
A.Button switch operation
The floor Iamp has one touch—sensitive button: Brightness Control Button.
Brightness Control Button
Touch the brighiness confrol butlon and then lamp will cycle through three options in
the following orders:
Tap Onee: Light lums on with low brightnass.
Tap and hold: Keep geifing brighter light.
Tap Once Again: light furns off.
——
5\ Ba
06
B. Rotatable angle of the Light Guide Panel
Only furn the lighting table manually, and the lighting table can be rotated 20 degrees
up and down. The Iwo extreme posifions are parallel to the lamp hole and perpendicular
to the lamp hole respectively.
coS—
07
2.Smart Confrol Operation Steps
1) Download TuyaSmart App
Please scan the QR code below to download the TuyaSmart App.
You can also download the TuyaSmart App by App Store or searching "Tuya$mart" in
Android Application.
2) Create a TuyaSmart Account and Sign in.
Open TuyaSmart App, then create a TuyaSmart Account and Sign in in this page.
secser 1911 oo‘ mam

Phone Number / Email
I agree to User Aareement and Privacy terms
3) Add familes. You need to fillin Home Name, and choose Family Location. then
choose a room that are equipped with smarl devices.
1992 @ + # o5x m +
Cancel Add families Done
Home Name
Family Location
Which rooms are equipped with smart devices?
Living Room
Master Room
Second Bedroom
Dining Room
Kitchen
Study Room
Add other rooms
Later, room settings can be modified at any time
09
4) Choose "All devices"
secser 20.4 @ + 0 o7% m
Cancel Select Device Type H
ZigBee device Bluetooth Device All Devices
Frequently Add
Wall switch(ZigBee)
4 . Well Socket(ZigBee)
TaH Sensor
ZigBee Gateway
PIR
Smart Connect Sensor
iR Control
AC Mate
5) Choose "Lighting devices".
sesser 20:6
< Back All Devices
. Electrical outlet
. Wall switch
' Lighting devices
(BBB — Air congitioner
a Washing machine
OB _ weter heater
. Air purifier
. Water purifier
- Oil heater
6) After entering this page, fist the lamp is powered off more than 10 seconds, then
e lamp wil be powered on—off—on—off—on—off—on three times.
(Note: Powering on and off mean you need to plug and unplug the lamp, instead of
touch the switch in the lamp. )
Al this lime, the lamp will enter the flash mode. Finally click the "Contirm light blinks
rapidly" in this page.
Power on the ight and contirm
thatlight blinks rapialy
Howto make teht biris raoity
m light binks rapidly
12
7) Enter WIFI password and click the "Confirm‘. (Note: Only 2.4GHz WeFi are supported
Enter Wi—Fi Password
Wi—Fi: 3608 MWiFi—... Change Network
Contirm
8) Then mobile App matches with the lamp. (Ihe connection time depends on the
network speed, usually 10—30 seconds)
Connecting Now
Make sure your phone and device
are as close to your router as possible
9) Affer adding the device successfully, you can rename the fixture according to your
personal preference. Affer saving, click the "Done".
sesser 2nan
4# co% us
Succeeded.
! floor light Z
10) Click the lamp you want to control and enter the operation page to control the
lamp.
am
floor light
How To Connect Your Devices To Amazon Alexa, Google
Assistant, IFTTT, Etc.
1. Open your Tuya Smart APP, find your "profile", and click "seftings" and "Integration".
Back senu
© Tap to set your name Case engs
Sound
Post Nottiton ©
Home Management
Message Center
Scan QR Code
About
mo
Clear Cache >
Fredback
Setings
ft ®
2. Then choose the one you want to connect. There are auiding steps respectively
as below.
Integration
O amazon alexa
Find More
ovas
©  Google Assistant
Find More
ovas
E IFTTT
Use Alexa
O amazon alexa
How to conmect your deviceto Amazon Alesa
Stop 1 : Add Device
Taking Alexa As a Example
Step 1: Set up Alexa
(Note: The following seiting steps may be simple. If you want to know more details
about selting steps, you can read the Amazon Alexa instruction.)
1. Use Alexa App to set up your Amazon Alexa. (If you had an Amazon account, just
sign in. If you don‘t, you need to create an Amazon accounl.)
ick "Alexa devices", choose Echo Dot and begin Echo dot setup.
Lea s
Choose a device to set up
s 8y proceeding,you agres to the terms found here.
BJ se
3 Echo bot
(eae
Routines Echo Dot Kids Edition
ocms
Contacts
{ _ Eho pios
Meerseta ho Echo Connect
cmcerserur
i, and walt for your iPhone to connect to Echo dot.
3. Find the Echo Dot W
Connect your iPhone to Echo Dot
#@—@—_—=—)
.- Connected to Echo Dot
Go to your WLF1 settings on thi iPhone and select
t network of the format Amazon 300 1t may take
up to a minute to dsplay. Wart unt Echo ot says
you are connected, then return to thiscreen
bovn see ts onavse uont rncr
cance. serup Euts
20
4. After connecting to the Echo Dot, select your Wi—Fi network.
(Note: The Wi—Fi nelwork mus! be consisient with the Echo Dot‘s Wi—Fi, and you need
to choose 2.4HGz WeHFL.}
After completing the selup, you can use "Alexa" to wake up your device.
Select your Wi—Fi network
Previously Saved to Amazon ®
No Wi—Fi networks have been saved.
Other Networks
360% AWiFi—SK T
Honor 9 Ti
THY &
aaaa T
2)
apeman Branding
RESCAN
CANCEL SETUP
Step 2 : Add Skill
1. In the menu bar, go to "Skill" and search for "Tuya Smart" .
Tuyo Smarl
n smare
uy amartinice
uy smarts
RBo
Pss
Emm
Eul
nc dool
Help & Feedback
2. Enable Skil, and type in your login from app account to finith the account linking.
Toya Smart
Tuya Smart
Rated: Guidance Suogested
stt k as
enaoue
Accoun Aecount Inkdng requied
G «—>— ,
i sarng Shounin: English (US)
Prssrs
FaetPraree susues asout m sw
ifyou have any problem when you use ths sil you can
contact us with emal: feedback@smartife me
Amazon Aesa and the uym mart home products work
together o help you contrl home appliance niceand cany.
You ca simply as Alex to urn on,tam off o cim the
tghe
Theresno need to go t th sutchto adiut you home
3. You need to click "Authorize" to complete the link.
Amazon Alexa
it ipmsco
Done & skils—store.amazon.com x
amazon alexa tuyd
\_J
Tuya Smart has been successfully O
linked.
What to do next Alexa by Amazon wl be ablo to
> Close this window to discover smart—home
riecaie your puslc profie
eviees you can control with Alexa
Gent you dnices over interet
o ean mt pernosinat y tee
Step 3 : Control Device
1. Affer 20 seconds, devices wil be discovered and Alex will tell you " I find a device".
Then you can control your devices using voice through Amazon Alexa product.
Coiss [o]
lss ESG
Ee
The following voice commands are supporied:
Alexa, turn on the bedroom light.
Alexa, set bedroom light to 0—100%.
Alexa, brighten bedroom light.
(Note: You need to choose 2.4HGz Wi—Fi in the whole process.)
Cautions
* Do not put the lamp close to TV or other radio devices to avoid noise.
* Do not repair, disassemble, or madify under any circumslances.
* Do not place near any heat source or in direct sunlight.
* Do not place on uneven, unsecure floor.
* Do not use appliance when the electrical cord is frayed or damaged.
* Do not fouch elechical appliance with wel hands or when liquids are present.
* Please keep the lamp dry and clean.
* Unplug the adapler when the lamp is not used.
* Power off before cleaning.
* Clean the Iamp only with soft diy cloth.
* Never overload elecirical circuils as it may cause electrical shock or fre.
Warranty
We warrant TECKIN products for 38 MONTHS from date of the original purchase. If the
product fails due to any manufacturing defect, please contact TECKIN support by
emailing to supportev@leckin.co | support.us@teckin.co with your purchase order
number and details of the problem.
We only provide aftersales support for products purchased from TECKIN or TECKIN
authorized distibutors. If you have purchased the product from a seller other than
TECKIN, please confact your seller for warranty cover.
Warning:
This devie complies with Part 15 of the FCC Rules. Operation is subject tothe following two
conditions: (1) this device may not cause harmful inerference, and (2) this deviee must aceep!
any interference received, including interference that may eause undesired operation:
changes or modifications not expressly approved by the party responsible for compliance
could void the user‘s authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the imits for a
Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are
designed to provide reasonable protection against harmful iterference in a
residential installation. This equipment generates, uses and can radiate rdio
frequency energy and, if not installed and used in accordance with the
instrictions, may cause harmfil inerference to radio communications. However,
there is no guarantee that iterference wl not occur in a particular insallation
1f this equipment does cause harmful nterference to radio or television reception,
which can be determincd by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
mensures
—— Reorient or elocate the receiving antenna.
—— Increase the separation between the equipment and receiver
—— Connect the equipment nto an outlet on a circuit different
from that to which the receiver is connected.
—— Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and ts antenna(s) must not be co—located or operation in conjunction with
any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC‘s RF Exposure guidelines, This equipment should be
installed and operated with minimum distance of =»© m the radiator your body. This deviee
and its antennas) must not be co—located or operation in conjunction with ... any other
antenna or transmitter

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Administrator
Create Date                     : 2019:01:21 12:10:10+08:00
Modify Date                     : 2019:03:13 11:23:28+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2019:03:13 11:23:28+08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - user manual
Creator                         : Administrator
Document ID                     : uuid:24db52d3-ba87-4b7e-9fe4-9a80b9a7bba6
Instance ID                     : uuid:ab3ddf2b-1a43-4f5f-978e-622e4ec52236
Page Count                      : 28

EXIF Metadata provided by EXIF.tools