ShenZhen RuiMaiDe S002 2-in-1 Wireless Charger User Manual S002

ShenZhen RuiMaiDe(RMD) Technology Co., LTD 2-in-1 Wireless Charger S002

User Manual

Thank you for purchasing the 2-in-1 Wireless Charger. Please read the manual carefully before using the product.Product Outline InstructionsPlace both your phone and Apple Watch on the wireless charger. Make sure they are well located in the charging area of the wireless charger. 1. USB Cable Connection 2. Charging 3. LED Indicator 3.1. Qi Wireless ChargerWhen the phone is charging, the LED Indicator on Qi wireless charger will light up to show charging status:User Maunal 2-in-1 Wireless Charger Connect Type-C USB cable to the main body and plug it into the power adapter. 1) Standby Mode - light is on with green colorLED IndicatorPower Bank Switch (click once - ON, click twice - OFF)Apple Watch Charging Stand Qi Wireless Charging DockAnti-slip PadsType-C Charging Port 2) Charging Mode - light will flash for 5 times and turn off3) Fully Charged - iOS: without LED light; Android OS: light is on with green color?10 0% C ha rg edAndroid OS10 0% C ha rg ed iOSProduct Contents1 x 2-in-1 Wireless Charger 1 x Apple Watch Charger 1 x Power Adapter 1 x USB Cable 1 x User Manual Applicable Devices1. Qi Wireless Charger Compatible Devices:1.1 10W Fast Charging Mode for: Samsung S9 / S9 Plus / Note 8 / S8 / S8 Plus / S7 / S7 Edge / S6 Edge Plus / Note 51.2 7.5W Fast Charging Mode for: iPhone X / 8 / 8 Plus1.3 5W Mode for All Qi-enabled Phones: a: Samsung S6 / S6 Edge b: Nokia Lumia 920 / 1020 / 928 / 1520 / 820 / 822 / 930 / 950 c: Moto Droid Maxx / Droid Mini / Droid Turbo d: Google Nexus 4 / 5 / 6 / 7 e: LG Optimus Vu2 / G2 / G3 / LG G6 / LG V30 f: Nexus 4 / Nexus 5 / Nexus 6 / LTE 2 / D1Product SpecificationsQi: 1 LED shows the charging statusApple Watch Power Bank: 3 LEDs indicate 30%, 60%, 100% of the powerModel S002Material ABS+PC, SiliconeWireless charging for Apple Watch 5WOutput Interface Type-COutput 1 Wireless charging for mobiles 5W / 7.5W / 10WOutput 2Input QC 3.0 18WCable Length 1mCapacity 850mAhPlug Standard US (JP/CN), EU, UK LED IndicatorDimension Qi Wireless Charger: 170 x 84 x 13.8mmApple Watch Charger: 39.5 x 39.5 x 41mm not work normally. 2. Please do not place any metal or magnetic object between your phone and charger, otherwise the charger will not work. 3. Equip your device with a Qi receiver if it is not Qi-enabled out of the box. 4. Only after the Apple Watch is fully charged can the power bank begin to charge. 2. Apple Watch Charger Compatible Devices: Apple Watch Series 1 / 2 / 3 / 4 / 1st generation in 38mm, 40mm, 42mm and 44mm. Attention: 1. Please make sure that the power adapter used meets the requirement. If the power is insufficient, the product may 4. Apple Watch Power BankThe Apple Watch charger can be detached and used alone as a power bank. Three LED indicators on the Apple Watch Charger indicate 30%, 60%, 100% of the battery respectively. 100%60%30%3.2. Apple Watch Charger4) Foreign Object or Error Warning - light is on with red color Note: It refers to the battery of Apple Watch Power Bank, but not the Apple Watch Charger. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interfe-rence that may cause undesired operation.FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjun-ction with any other antenna or transmitter.FCC Caution:

Navigation menu