ShenZhen SHIDU Digital Technolgy SDU50001 Handheld microphone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3721728
Application ID	39rnCP6n1Lk4gy+QYOrY6g==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.71kB (358818 bits)
Date Submitted	2018-01-20 00:00:00
Date Available	2018-01-20 00:00:00
Creation Date	2017-12-13 11:16:43
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2017-12-13 11:16:43
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

SD-S92 User Manual
SHIDU S92 UHF Wireless Portable PA System with Hand-held MIC and waist
2. Mode key: Short press “M” key can switch the mode between U disk, TF
hanging wireless microphone. S92 is a highly integrated system with many
card mode, AUX mode and Bluetooth mode.
features. It is a public address system that amplifies your voice with HD
3. Play/pause: In TF card reading mode or Bluetooth mode, short press “
sound quality. You can use the enclosed UHF wireless microphone to talk into
to pause, and short press again to play.
it. It is easy to pair the transmitter and receiver and you can select different
4. UHF mode key: In “power on” status, short press “UHF” to open the UHF
frequencies to use when you are using more than one system. You can use a
wireless amplification mode, and short press again to close this mode; long
wired microphone to talk into it. It is a Music Player and also a Bluetooth
press this key means pair the UHF frequency point manually.
speaker. You can play music from a TF card or USB flash disk.
5. Next/ fast forward key: In TF card reading mode or Bluetooth mode, short
Please read the instructions carefully before using it.
press “
”
” means next song; in TF card reading mode, long press means fast
forward.
(Note: in Bluetooth mode, long press “
Main features:
” not support fast forward.)
6. Previous/ fast backward key: In TF card reading mode or Bluetooth mode,
1. SHIDU patented appearance;
short press “
2. Stylish, ergonomic and comfortable design;
means fast backward.
3. UHF high frequency wireless PA technology, transmission distance up to 35m;
(Note; in Bluetooth mode, long press “
4. Double-emission and double-receiving function, which can pair and use
7. Volume +: Short press “+” means increase volume one by one while long
hand-held and waist-hanging UHF wireless MIC at the same time;
” means Previous song; in TF card reading mode, long press
” not support fast backward.)
press means increase the volume in a fast way.
5. 3.5 inch Hi Fi double magnetic big-size trumpet, maximum peak up to 25W;
6. Adopt SHIDU original sound amplification electroacoustic system, which can
amplify the sound in a real & stable way;
7. With Bluetooth 4.0 icloud control, which support playing audio files in mobile,
8. Volume -: Short press “-” means decrease volume one by one while long
press means decrease the volume in a fast way.
9. Battery capacity display: In the “power on” status, short press volume “+”
or “-” can display the current battery level.
tablet PC.
8. Built-in 2pcs * 3.7V/2000mAh Lithium battery;
10. Power and UHF paring indicator.
9. Super MP3 decoding technology and support TF card & USB;
11. Ø3.5mm Microphone Jack: Note: This voice amplifier support wired
10. Equipped with SHIDU original microphone --- Hi-Fi acoustic amplification;
microphone; you can insert the wired microphone in the standard package
11. Support synchronous Karaoke.
and realize to amplify the voice.
12. Ø3.5mm Aux In
Specification:
13. DC 9V charging slot.
14. TF card: support various audio formats: MP3, WMA, WAV, APE & FLAC.
Output power:
25W
Frequency response:
90Hz-18KHz
Output Impedance:
4Ω
Work temperature:
-10℃-45℃
16. Straps hooks.
Music-play time
4-6 hours
Amplify time
6-8 hours
17. Battery cover.
3-5 hours
Charge the amplifier
(50% volume):
Charging voltage:
15. U disk: support various audio formats: MP3, WMA, WAV, APE & FLAC.
(50% volume):
DC 9V, 1A+
Charging time:
The first frame of battery icon “
” is keeping flash during using means it’s
low battery and need to be charged. Please use DC 9V power charger, the
other end connects with the power supply AC 110~220V. The battery icon
will flash from first frame to fourth frame when charging, and the four frames
of battery icon light on means fully charged.
Note: We suggest fully recharge the amplifier before you using it at the first
time.
Wireless Bluetooth icloud Amplification:
Please pair with your Bluetooth device as follows:
Step 1: Turn on the speaker get into Bluetooth mode or switch to Bluetooth
mode. (It is Bluetooth mode by default once power on.)
Step 2: Turn on your Bluetooth device, scan and search for “SD-S92”, click
“SD-S92” and successfully connected with a voice prompt: “Bluetooth
connected”.
Structure Instruction:
1. Power switch: Long press “
” to turn on, then the red light will on all the
time; in “power on” status, long press “
” to turn off, then the red light will
Pairing & usage of U5 hand-held UHF wireless microphone(Below
short for “Hand-held MIC”):
go out.
SHENZHEN SHIDU DIGITAL TECHNOLOGY CO.,LTD
Tel:+86-755-21635866
Fax:+86-755-29105099
Email:info@10shidu.com
Website:www.10shidu.com
SD-S92 User Manual
A. Insert the wired microphone into the “MIC” input port of waist hanging
UHF wireless transmitter;
B. Switch the wheeled power switch to “ON”, and the battery level indicator
will light on, which means you have turned on the waist hanging UHF
wireless transmitter;
C. Switch the wheeled power switch to “OFF”, and the battery level indicator
will go out, which means you have turned off the waist hanging UHF wireless
transmitter.
2. UHF frequency pairing:
A. Turn on the UHF wireless voice amplifier, then long press “UHF” key and
the red indicator light will flash, which means the device has enter into the
1. Turn on/off:
A. Long press “
UHF wireless pairing status;
” to turn on, and the blue indicator light will on all the time;
B. In “power on” status, long press “
” to turn off, and the blue indicator
light will go out.
B. Long press the “Pair” key of waist hanging UHF wireless transmitter, and
enter into UHF wireless paring status, then the red power indicator will on
all the time, which means paired successfully and you can try to speak;
C. In the status of UHF wireless amplification, short press “UHF” key of
2. UHF frequency pairing:
voice amplifier, you can pause UHF wireless amplification mode.
A. Turn on the UHF wireless voice amplifier, then long press “UHF” key and
D. In the status of UHF wireless amplification, long press the “Pair” key of
the red indicator light flashes, which means the device has enter into the
waist hanging UHF wireless transmitter and you can exit the UHF wireless
UHF wireless pairing status;
amplification mode.
B. Turn on the Hand-held MIC, then short press the “
” three times quickly
and enter into UHF wireless pairing status, then the red indicator light of
3. Adjust volume of waist hanging UHF wireless transmitter:
voice amplifier will stop flashing and on all the time, which means pairing
In the status of UHF wireless amplification, you can adjust the volume of
successfully. And you can begin to speak;
amplification through the wheeled volume switch of waist hanging UHF
C. Paired successfully, then short press “UHF” key of voice amplifier, you
wireless transmitter.
can pause UHF wireless amplification mode. Short press again, you can turn
(Note: You can also adjust the volume of amplification by operating the “+” &
on the UHF wireless amplification mode.
“-” of multimedia UHF wireless voice amplifier.)
3. Charge the Hand-held MIC :
4. Charge the waist hanging UHF wireless transmitter:
The Hand-held MIC is low battery with red indicator flashing please charge it
A. Battery capacity indication: “Full” blue lights means 100%; “Half” yellow
timely.
lights means 50%; “Low” red lights means low battery and please charge it
Please switch-off the speaker before charging. The red indicator light will
timely;
flash during charging and will on all the time after fully charged. Please
B. How to charge the transmitter: Turn off the waist hanging UHF wireless
recharge it with 5V 500mA ~1.5A adapter and the charging time is normally 2
transmitter, and connect the DC 5V charger with the transmitter, then
~3 hours.
connect with the 100~240V socket; the battery capacity indication “Half” and
“Low” will flash one by one when charging; and the three lights “Full”, “Half”
Pairing & usage of U2 waist hanging UHF wireless microphone:
and “Low” will on all the time after charged.
Note: We suggest fully recharge the waist hanging UHF wireless microphone
before you using it at the first time.
SHIDU Guarantee:
100% SHIDU Guaranteed Product Satisfaction.
We promise 1 year warranty.
If you have any questions, please feel free to contact us, we will try
our best to provide you the best service.
www.10shidu.com Email:info@10shidu.com
1. Turn on/off:
SHENZHEN SHIDU DIGITAL TECHNOLOGY CO.,LTD
Tel:+86-755-21635866
Fax:+86-755-29105099
Email:info@10shidu.com
Website:www.10shidu.com
SD-S92 User Manual
Federal
Communications
Commission
(FCC)
or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the
Statement
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including
interference
that
may
cause
undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and
receiver.
●Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
●Consult the dealer or an experienced radio/TV
technician for help.
Warning: Changes or modifications made to this device
not expressly approved by ShenZhen SHIDU Digital
Technolgy Co.,Ltd may void the FCC authorization to
operate this device.
Note: The manufacturer is not responsible for any radio
SHENZHEN SHIDU DIGITAL TECHNOLOGY CO.,LTD
Tel:+86-755-21635866
Fax:+86-755-29105099
Email:info@10shidu.com
Website:www.10shidu.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2017:12:13 11:16:43+08:00
Modify Date                     : 2017:12:13 11:16:43+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : <5C5C57616E672D70635CB9B2CFEDD7CAC1CF5C32303137C4EAB0B8BCFE5C3130D4C25CCEDED4ADCABCD7CAC1CF5C43544C313731303039333033322D574620C9EEDBDACAD0CAAEB6C8CAFDC2EBBFC6BCBCD3D0CFDEB9ABCBBE202856503334353029C0A9D2F4C6F7204643432049445CD4ADCABCD7CAC1C
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:a0860a71-8a7a-4137-8325-aacfbddb2be5
Instance ID                     : uuid:65c52810-4253-4ff3-920a-11fa604444f2
Page Count                      : 3

EXIF Metadata provided by EXIF.tools