ShenZhen YuYuanXin Electronic Technology TYW Wii Neutral Remote Controller User Manual
ShenZhen YuYuanXin Electronic Technology Co., LTD Wii Neutral Remote Controller
User Manual
Manual for Wii Neutral Remote Controller
Name: Wii neutral remote controller
Model No.: TYW-1137
Brief introductionⅠ
This product is a wireless Bluetooth and long distance operated
controller. It uses Bluetooth connection design and is specially used for Wii
game console. It has 9 effective function buttons(POWER、A button、B
button、- button、+ button、HOME button、1 button、2 button、SYNC button)
1 direction control button,4 signal channel indicators. All functions are in
exact accordance with function operations of original remote controller.
The face cover of controller can be changed into transparent or other
colors according to your like and makes it more attractive and fashionable.
ⅡSpecifications
1. Work voltage: DC 3V
2. Work current: Max 65MA
3. Long distance operation:3m(default)
4. Weight:70g
5. Material: ABS
6. Color: white(console)
7. Dimensions: 148*36*31MM
Using instructionsⅢ
First open the power source of Wii console and connect the relevant video
cables, then open the battery cover of remote controller and put two AA
batteries according to polarity mark and then close it. Press SYNC button,
the 4 LED flash quickly, press it again and when it is connected with the
console, the No.1 LED on the remote controller is on, (If the controller is
the first to connect with Wii game console, No.1 LED on the controller is
on; if it is the second to connect with console, NO.2 LED is on), it shows
that the console is connected well, and then you can enter the game
according to game tips.
CautionⅣ
1. Read the manual before using.
2. Do not beat or knock this product heavily.
3. Keep all liquids away from this product.
4. Do not dismantle it for any reason.
Federal Communications Commission (FCC) Statement
This equipment has been tested. And it found to comply with the limits for
a Class B digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates and
uses and radiates radio frequency energy and, if not installed and used in
accordance with the instruction, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio /TV technician for help.
Warning: A shielded-type power cord is required in order to meet FCC
emission limits and also to prevent interference to the nearby radio and
television reception.
It is essential that only the supplied power cord be used.
1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
3. RF exposure warning:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. This
transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.