ShenZhen YuanYun technology Y7 Bluetooth stereo Headset User Manual Y7 Manual
ShenZhen YuanYun technology Co., Ltd. Bluetooth stereo Headset Y7 Manual
15_Y7 UserMan
Y7 Bluetooth stereo Headset Manual
Get Paired
The first time you power on your headset, it begins the pairing process. You have two ways to
pair the headset:
1. By Bluetooth mode.
1) Press and hold the power button until the green LED flash quickly (3 sets /second) to
indicate pairing mode.
2) Activate Bluetooth on your phone and set it to search for new devices.
3) Select “Y7”.
If necessary, enter Zeros (0000) for PASSCODE or accept the connection.
Once successfully paired, the headset indicator light and stop flashing
Power the headset ON or OFF
Press the Audio/Call button until the green LED indicator light. To power off, press the
Audio/Call button for 3 seconds until the green LED indicator is off 。
Play or Pause audio,
Click the Audio/Call button
Skip to next track
Hold the Volume up (+)
Play previous track
Hold the Volume down (-)
Adjust the volume
Click the Volume up (+) or down (-) to adjust the volume
Answer or end a call
Click the Audio/call button when a calling in
Decline a call
Click the Audio/call button when a calling end
Redial
Double click the Audio/call button to dial the last number called.
Change ear tips
Select the size of ear tip that provide you with the best comfort and fit.
Gently peels the edge of the attached tip away from the earpiece, using care not tear the
tips.
Position the opening of new tips over the nozzle and small slot over the nozzle hook.
Ease the base of the tip down around the base of the earpiece until the tip feel secure.
Safety Information
Warnings
Contains small parts witch may be a choking hazard, not suitable for children under age
4
This product contains magnetic materials
Long-term exposure to loud music may cause hearing damage, it is best to avoid high
volume levels when using headset, especially for extended periods
Cleaning
Your headset may be periodic cleaning:
Ear tips: Remove the tips from the headsets and wipe with a damp cloth and mild soap.
Allowing the tips to thoroughly dry before you put them back on the headsets.
Headset nozzles: Clean exterior only with soft cloth. Never insert any cleaning cloth into
the nozzles.
Attached Components in package
USB Cable
Ear tip: Large (transparent)
Ear tip: Middle (transparent)
Ear tip: Small (transparent)
FCC Statement:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Thisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwo
conditions:
(1)thisdevicemaynotcauseharmfulinterference,and
(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
undesiredoperation.
Changesormodificationstothisunitnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.