Shin Heung Precision BT-DG BLUETOOTH DONGLE User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2012935
Application ID	JiwK+vDN3OSkmRdWythWrg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	103.7kB (1296221 bits)
Date Submitted	2013-07-10 00:00:00
Date Available	2013-07-10 00:00:00
Creation Date	2013-07-02 16:23:13
Producing Software	doPDF Ver 7.3 Build 387 (Windows 7 Home Premium Edition (SP 1) - Version: 6.1.7601 (x64))
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual

ELLIXBLUE
USER MANUAL
(VER1.00 ’ 2013.05.23)
.‘°.°°>‘.°’.‘“P.°°.N."
Features
Specifications
Default Settings (Factory Settings)
Parts
LED Status
Product Component
Device Configuration
How to install
FCC compliance Information
SHM4S
SAM4S BLU ETOOTH ADAPTER
ELLIXBLUE USER MANUAL SHM4S
1 . Features
, Using Class 1(100m) Bluetooth Module. transmit power has been enhanced in the
data communication.
- The Devices are pairing in the factory stage. It can be used without any additional
settings. (In the case of Master/Slave Set purchase)
— Easy Installation, easy maintenance, handy settings with setting utility programs
— For R872320 Communication, the Bluetooth Dongles support two type connectors
(DSUBQ FEMALE/MALE)
— Interface card type is also available. It can be installed in the ELLIX printer.
— If the host device has no R8432 port. USB communication can be used. It uses
Virtual COM profile.
- Bluetooth communication status can be easily identified by the status LEDs of the
top side.
2. Specifications
Item Specification
(i) BT—DG E (DSUBQ FEMALE)
(2) BTeDGJ/I (Dsuag MALE)
(é) BT—iE (INTERFACE CARD)
V2.0-i-EDR certification
Model Name
Bluetooth Version
Frequency 2.400 to 2.4835 (3H;
Tx. power Up to I8dBm(CL/\SSI)
Rx. sensitivity 788 dBm typical
Coverage Up to I00 Motors(Oan space)
Dongle typo ' Chip antenna (Gain' Max I.5dBi)
Antenna
Interface card type 2 Cable antenna (Gain: Max 2.0dBi)
DCSV 80m/\
' USB ' USB BUS POWER
Power Supply
' RSe232C' DSUBQ Ping
' DC 5V Adaptor
Profile SPP (Serial Port Profile)
RS-232C
Interface Support
USE Vii (Virtual Corn Profile)
Flow Control RTS / CTS
Baud Rate i.2/2.4/4.8/9.6/i9.2/38/1/576/115.2 Kbps
Page 2
SAMAS BLUETOOTH ADAPTER
ELLIXBLUE USER MANUAL SfiM4S
3. Default Settings (Factory Settings)
7 Baud rate: 115200bps
7 Parity: None
— Flow control: Enable
— Stop bits: One
4. Parts
1) Dongle type
2) Interface card type
[um lN» 3.: i
(i) DSUBQ Female or Male connector
— it connected to the serial port of Host or
Slave Device.
Used for data communication or configuration.
(2) Status LED
- Power/ Link status/Data transceive status
displayed.
® Mini USB Port
— While connecting to PC/POS, It operates
of virtual com port It is used to change
the settings. Also it can be used for power
supply.
(1) Status LED
— Power/Link Status/ Data transceive status
displayed
(2) Mini USB Port
- While connecting to PC/POS, It operates
of virtual com port. It is used to change
the settings
® Antenna connector
— Cable Antenna can be mounted
@ l/F Connector
Page 3
SAMAS BLUETOOTH ADAPTER
ELLIXBLUE USER MANUAL SfiM4S
5. LED Status
Status Description
All LED blink three times Device boot OK
Data LED on Transmitting / RecoiVing data
Link LED off No pairing established
Link LED fast (0.1 sec) blinking Pairing (siavo or master modo)
Discoverabie and waiting for aconnection
Link LED fast (0.3 sec) blinking
(siavc modc)
Link LED slow (0.9 sec) blinking inquiring (master modc)
Link LED ven/ slow (1.2 sec)
Connecting (master modo)
blinking
Link LED steadily on Connection estabiisned
6. Product Component
1) Software
— ELLIXBLUE Configuration Tool (Include Virtual com port driver)
2) Bluetooth Device
Item Specification Specification
Master Side - ELLlX PRINTER
(ex : Pos, PC, ECR. (efl'aiDeRfiigER) INTERFACE
various terminal device) ' CARDTYPE
Page 4
SAMAS BLUETOOTH ADAPTER
ELLIXBLUE USER MANUAL SfiM4S
3) Optional peripherals
Item Specification
Connected to mini USB port,
used for Device settings.
Data Communication/power supply
Gender Connector
For 25pm serial port
7. Device Configuration
1) ELLIXBLUE Configuration Tool
Efi: I "mm" m“ at (1) Make the Bluetooth device a connection
WWW Wm- "mm to PC/POS on which ELLIXBLUE
@Local DevlceSettings m Configuration Tool is installed.
w m mm A. gamma. A . .
new... .m... m. i7 m (2/ Run ELLIXBLUE Configuration Tool.
“M 3 “m" 3' m Select Serial port settings, and click
11:53:" T21” PORT OPEN button.
r.- mm... r ku
mummim deVice information will be displayed.
(3) If port successfully opens. existing
nm- Mann
(In port open fail case. change the
serial port settings and retry)
um me
n. m.
mm mm“
(4) After settings are modified, click Save
Settings Button to apply changes
>:< For the more details about ELLiXBLUE Configuration Tool. refer to the annex
manuai_ (include Virtual Com Driver installation)
>:< When Purchased as a Master/Slave Biuetooth Set, there's no need to additional
pairing setup. (those are already paired.)
Page 5
SAMAS BLUETOOTH ADAPTER
ELLIXBLUE USER MANUAL SfiM4S
2) HyperTerminal
"""‘"““‘““"""‘"'“"' BE)‘ (1) Make a Bluetooth device connect to
ill: in an.» (2th mm m
” PC/POS on which HyperTerminal is
installed.
1NONE FLO“ CONTROL
2—6F 2F 22 SET BLUETOOTH ADDRESS CONNECT T0
CHO CHARACTER A _
gE'SyEgXE'gES'FF” """F \2; Run HyperTerminal and open port
AUD 'Eéi‘mimu With serial setting value 01 Bluetooth.
:gu'm coNN'Ec'r'ING 7‘ _ H H
ESULT con: (3; Press Enter Key after typing AT ,
EMS? Fousnmw 0F 18232 mm and it will show "0K" in the case oi
cHE ii...
Normal connection.
(On the other case, retry after change
serial settings appropriately.)
Qt) Change the Bluetooth deVice settings
by using AT COMMAND.
( l
>Z< Please refer to AT—COMMAND SET MA UAL about AT Command
8. How to install
1) Installing on the SLAVE device (such as a printer)
STEP1.
Make the DSUBQ male type Bluetooth device(BT—DG_M) a connection to Serial port
of Printer.
It the printer have a DSUBZS pin serial interface. use DSUB9(F) to DSUB25(M) Gender.
STEP2.
When the printer is turn on, make sure whether the power supplies on the Bluetooth.
if the printer does not supply power to the Bluetooth, go to step 3.
(In the case of the latest version of ELLIX PRINTER, the power from serial port can
be turned on and pit by using shunt.)
STEP3.
it there is no power supply from serial port, make the power adapter (+5V) a connection
to the Mini USB port. It will supply the power to the Bluetooth.
(For ELLIX30/40. after latest F/W upgrade. it the printers USB port and Bluetooth's
mini USB port are connected with cable, the printer supplies power to the Bluetooth
device.
Page 6
SAMAS BLUETOOTH ADAPTER
ELLIXBLUE USER MANUAL SfiM4S
2) Installing on the HOST device (such as PC/POS/ECR)
STEP1.
Make the DSUBQ female type Bluetooth device(BT—DG_M) a connection to Serial port
of the HOST. if there is no serial port on HOST, connect by USB , then It operates of
virtual com port.
STEP2.
If there is no power supply from serial port, make the power adapter (+5V) a connection
to the Mini USB port.
9. FCC compliance Information
This device complies With Part 15 of the FCC Rules and Industry Canada License-exempt
RSS standard(s).
Operation is subiect to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation of the device
CAUTION 2 Any Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
Mobile Device RF Exposure Statement
RF Exposure 7 This device is only authorized for use in a mobile application. At least
20 cm of separation distance between the transmitting antenna device and the user's
body must be maintained at all times.
Information to the user
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions. may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorienf or relocate the receiving antenna.
7 Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Page 7
SAMAS BLUETOOTH ADAPTER

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 7
Page Layout                     : OneColumn
Page Mode                       : UseNone
Producer                        : doPDF Ver 7.3 Build 387 (Windows 7 Home Premium Edition (SP 1) - Version: 6.1.7601 (x64))
Create Date                     : 2013:07:02 16:23:13+09:00

EXIF Metadata provided by EXIF.tools