Shinpoong Electronics ZS2400 ZIGBEE SHOULDER SPEAKER MICROPHONE User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2025313
Application ID	wDb/PBaPDAYd0RQTcjv17A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.39kB (454851 bits)
Date Submitted	2013-07-25 00:00:00
Date Available	2013-07-25 00:00:00
Creation Date	2013-07-19 17:01:30
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2013-07-19 17:02:26
Document Title	Microsoft PowerPoint - ZS2400 User Manual(영문번역본)_130708 [호환 모드]
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Kim SoonHo

ZS2400 User Manual
( ZigBee Speaker Mic )
SHINPOONG Electronics inc.
Contents
Product overview
In the package
Part description
How to use ZS2400
Mode Selection
Power
on/off
/ ff
Mode & CH Change
Normal & Intercom Change
Volume control
Low Battery
Charging
Specification
Appendix
Declaration of confirmation
WARRANTY
Product Overview
Thank you for choosing SEECODE ZigBee Speaker Mic. This device connect Your two-way radio to ZigBee
Speaker Mic without wire and let you more Comfortable to use.
You can put heavy two-way radio in car or office and just use ZigBee Speaker Mic. Instead. This device
removes inconvenience and danger especially for police
police, sailor
sailor, Workers in plant,
plant construction site & etc.
etc
In the package
ZS2400
Part description
Charging Adaptor(5V/300mA)
User,s Manual
How to use ZS2400
Mode Selection
This device is available with 2 types of mode
- Normal Mode : This device control transmitting/receiving remotely by connecting ZigBee module in two-way
radio. This device is available with two-way radio supporting ZigBee and uses 8 channels
from 11 to 18.
- Intercom Mode: Once you set up a channel between ZigBee Shoulder Mic, you can transmit and receive
messages each other at short range without two-way radio. Multiple users(256 people) can
transmit/receive messages at short range at the same time. The device uses 8 channels from
19 to 26.
Power ON
IIn Power
Off state, when
h you press MULTI button
over a second,
d the
h power turns on with
ihB
Booting
i tone and
informs Mode and Channel with voice.
- Normal Mode : It informs Channel information with voice.
- Intercom Mode : It informs Intercom Mode and Channel information with voice.
Power OFF
In Power On state, when you press MULTI button over a second, the device turn off with Booting tone.
How to change Normal/Intercom Mode
Normal Mode
1) In Power Off state, when you press Volume Up with MULTI button, RED and BLUE LED come on with
‘INTERCOM’ sound and the device goes to change mode of Normal channel.
2) In this state, you can change channels from 1 to 8 by pressing Volume Up/Down button.
3) After setting up a channel, when you press PTT button, it will be completed.
4) When pressing MULTI button, the device turn on and you will hear set channel information after ‘INTERCOM’
sound.
Intercom Mode
1) In Power Off state, when you press Volume Up with MULTI button, RED and BLUE LED come on with
goes to change
g mode of Intercom channel.
‘INTERCOM’ sound and the device g
2) In this state, you can change channels from 1 to 8 by pressing Volume Up/Down button.
3) After setting up a channel, when you press PTT button, it will be completed.
4) When pressing MULTI button, the device turn on and you will hear set channel information after
‘INTERCOM’ sound.
How to Change Normal/Intercom Mode
While using the device you can change to Normal/Intercom mode
mode. You should press Volume Up button over a
second for changing from present mode to other.
If you are using normal mode now, it will change intercom mode and inform ‘INTERCOM’ and channel
information by voice. But if you are using Intercom mode now, you will hear only Channel information when it
goes to Normal mode.
Volume Control
There are 5 levels of volume. You can control by pressing Volume Up/Down button. When you control volume
in standby state, you hear beeps. But in receiving state, in order to prevent cutting off receiving voice, you can
control the volume without hearing beeps prevent cutting off receiving voice.
Low-Battery State
In Low-Batter State, it beeps at interval of 5 seconds and turns off automatically after 5 minutes with booting
sound. The device will not turn on again unless you recharge it.
Charging
This device can be charged in On/Off state in any circumstances.
ZigBee speaker Mic has a built-in battery and needs to be fully charged before using. You can charge with
Charging Adapter. Charging time is less than 3 hours and BLUE/RED LEDs blink every 3 seconds. All
LEDs turn off when charging is completed.
When you charge in ‘On’ state, RED LED will turn off and BLUE LED blinks every 5 seconds. When it
charge
g in ‘OFF’ state, all LEDs turn off.
Specification
Declaration of confirmation
WARRANTY
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is con-nected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation
IMPORTANT NOTE:
IMPORTANT Safety Instruction:
1)
2)
3)
4)
5)
6)
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this equipment near water.
Do not using near any heat sources such as radiators, heat resisters, stove, or other
equipment that produce heat.
Information to user.
The users manual or instruction manual for an intentional or unintentional radiator shall
caution the user that changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment. In
cases where the manual is provided only in a form other than paper, such as on a
computer disk or over the Internet, the information required by this section may be
included in the manual in that alternative form, provided the user can reasonably be
expected to have the capability to access information in that form.
Shinpoong Electronics Inc.
A1107, Gwangmyeong TechnoPark, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, KOREA
TEL : +82-70-8855-8300 / FAX : +82-2-2083-2272 / E-mail : jaebongoh@hanmail.net
CONTACT INFORMATION
Manufacturer Address : A1107, Gwangmyeong TechnoPark, 60, Haan-ro, Gwangmyeong-si,
Gyeonggi-do, KOREA
To locate in-country Shinpoong Electronics Inc., distributors of the ZigBee Shoulder Speaker Microphone
please refer to the Shinpoong Electronics Inc. Website http://www.seecode.com
These distributor(s) represent local contacts for this product.
CORPORATE HEADQUARTERS:
Shinpoong Electronics Inc.
A1107, Gwangmyeong TechnoPark, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, KOREA
Tel: +82-70-8855-8300
Fax: +82-2-2083-2272
E-mail: jaebongoh@hanmail.net
Web: http:// www.seecode.com
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is Subject to the following two condition: (1) this device may not cause interference
,and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
EUROPEAN UNION “DECLARATION OF CONFORMITY”
DECLARATION OF CONFORMITY
Shinpoong Electronics Inc.
A1107, Gwangmyeong TechnoPark, 60, Haan-ro, Gwangmyeong-si, Gyeonggi-do, KOREA
declare under our sole responsibility that the product(s)
ZigBee Shoulder Speaker Microphone – ZS2400
to which this declaration relate(s) is in conformance with the following standards:
EN 301 489-1 V1.9.2:2011
EN 301 489-17 V2.2.1 :2012
EN60950-1:2006
EN 300 328 V1.7.1:2006
following the provisions of the 1999/5/EC Directives.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Kim SoonHo
Create Date                     : 2013:07:19 17:01:30+09:00
Modify Date                     : 2013:07:19 17:02:26+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Kim SoonHo
Title                           : Microsoft PowerPoint - ZS2400 User Manual(영문번역본)_130708 [호환 모드]
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:07:19 17:02:26+09:00
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:4d81b08b-5957-4b1e-aba6-7cc4b465b072
Instance ID                     : uuid:fb3ced98-1aa4-416c-ac5b-e8fdec24719d
Page Count                      : 10

EXIF Metadata provided by EXIF.tools