Shockfish OI7P1 Wireless PDA User Manual RegulatoryInformation
Shockfish SA Wireless PDA RegulatoryInformation
Contents
- 1. Basic Manual
- 2. Regulatory Information
Regulatory Information
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1003259 |
| Application ID | vLBtLzaK9ppDhgoUES+n+Q== |
| Document Description | Regulatory Information |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 7.99kB (99906 bits) |
| Date Submitted | 2008-09-19 00:00:00 |
| Date Available | 2008-11-20 00:00:00 |
| Creation Date | 2008-09-11 18:39:40 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2008-09-11 18:39:40 |
| Document Title | Microsoft Word - RegulatoryInformation.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | rmeier |
Product Regulatory Information FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A and Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Important Any changes or modifications not expressly approved in writing by the manufacturer may void the user’s authority to operate the equipment. Exposure to radio frequency energy (SAR) In order to comply with FCC RF exposure safety guidelines, this device and its antenna must not be collocated or operating in conjunction with any other antenna or transmitter. The user of this device should ensure that the operation of this device is in compliance with these provisions. FCC RF Safety Statement This equipment complies with FCC RF exposure safety guidelines for mobile devices. Users MUST keep at least 20 cm separation between the device and the user’s body when operating the device (excluding extremities: hands, wrists) Do NOT use the device in a manner such that it is in direct contact with the body (i.e. on the lap or in a breast pocket). Such use will likely exceed FCC RF safety exposure limits. See www.fcc.gov/oet/rfsafety/ for more information on RF exposure safety. Antenna Care/Unauthorized Modifications Use only the supplied integral antenna. Unauthorized antenna modifications or attachments could damage the unit and may violate FCC regulations. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Responsible Party: Shockfish SA PSE-C parc scientifique 1015 Lausanne EPFL www.shockfish.com Canadian Wireless Regulatory Notice This Class B digital apparatus meets all the requirements of the Canadian interference Causing Equipment Regulations. Operation is subject to the following two conditions: a) this device may not cause any interference, and b) this device must accept any interference, including interference that may cause undesired operation of the device. To prevent radio interference to the licensed service, this device is intended to be operated indoors, and away from windows to prevent maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. CE Declaration of Conformity Hereby, Shockfish SA declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. France In order to comply with power restrictions in the 2.4 GHz band in France, Spotme can only be used indoors. Battery Warning Do not mutilate, puncture, or dispose of batteries in fire. The batteries can burst or explode, releasing hazardous chemicals. Discard used batteries according to the manufacturer’s instructions and in accordance with your local regulations. Intrinsic Safety Warning Warning – Explosion Hazard • Substitution of components may impair suitability for Class I, Division 2; • When in hazardous location, turn off power before replacing or wiring modules, and, • Do not disconnect equipment unless power has been switched off or the area is known to be nonhazardous. Wireless Notices—Usage Cautions In some situations, the user of the wireless device may be restricted. Such restrictions may apply aboard an airplane, in hospitals, near explosive environment, in hazardous locations etc. If you are not certain of the policy that applies to the use of this device, please ask for authorization prior to operating the device.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2008:09:11 18:39:40+02:00 Modify Date : 2008:09:11 18:39:40+02:00 Page Count : 3 Creation Date : 2008:09:11 16:39:40Z Mod Date : 2008:09:11 16:39:40Z Producer : Acrobat Distiller 5.0 (Windows) Author : rmeier Metadata Date : 2008:09:11 16:39:40Z Creator : rmeier Title : Microsoft Word - RegulatoryInformation.docEXIF Metadata provided by EXIF.tools