Shuaixian Electronic Equipment SX-990 Bluetooth Earphones User Manual SX 990 41

Shenzhen Shuaixian Electronic Equipment Co., Ltd. Bluetooth Earphones SX 990 41

user manual

Please choose a proper volume when hearing the headset. It is also important to control the hearing time for your ears health. Pairing time exceeds 3 minutes, SX-990 will automatically shut down ;If the headset are back to the effective distance in 3 minutes, it will automatically reconnect with the last connected device. When there is an incoming call, the headset will prompt: Incoming call" with vibration. Phone number"134........."will be broadcasted. Click MFB to answer or just operate on your mobile phone.Press the MFB button to hang up calls, or directly hang up on your mobile phone, it will prompt" Call ended".When there is an incoming call, headset will broadcast the phone number with vibration. Double click the MFB to reject or just reject it on your mobile phone, it will prompt" Call rejected ".Battery lowWhen the headset is connected with smart phone, if the distance between device and headset is out of 10 m, headset will prompt "Device disconnected"If comes back to the working distance within 3 min, headset will reconnect automatically with your mobile phone. If not comes back around working distance in 10 min, headset will power off, Please switch the button to OFF and then to ON to wake up the headset to back to work.Mobile phone lost indicator with headsetDouble click the volume" –" when calling to have call transferred between phone and headset.Unlock the mobile phone and double click the volume " - " to launch the voice dial, it will prompt" Voice Dial" , and then just speak the people's name who you want to call, This function only works if your mobile phone support it.SX-990SX-990SX-990If the environment is potentially dangerous, please stop using the headsetBefore charge this headset with charging cable, please check whether the charge cable is original.1. Switch the button to:"ON", the headset will turn on with vibration and prompt "Power On" the red and blue indicator light are flashing alternately which means the headset is entering into pairing mode and prompt" Ready to pair".2. Switch to "ON", it will prompt " Ready to pair " after 5 Seconds ,the red and blue lights flash alternately when headset is ready for paring .4. Click SX-990, Bluetooth headset gets connected with your device automatically, and prompt" Pairing completed" and also will prompt" Device connected" when successfully connected with SX-990. Some may require pass code which is 0000.chargebetterSX-990SX-990SX-990Bluetooth EarphonesBluetooth Earphones SX-9Bluetooth EarphonesBluetooth Earphones90Bluetooth EarphonesSX-990Bluetooth EarphonesFCC ID:UHBSX-990Bluetooth Earphones
NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu