Shure orporated AD651FOB Talk Switch User Manual AD651FOB

Shure Incorporated Talk Switch AD651FOB

AD651FOB_User Manual

Download: Shure orporated AD651FOB Talk Switch User Manual AD651FOB
Mirror Download [FCC.gov]Shure orporated AD651FOB Talk Switch User Manual AD651FOB
Document ID3985734
Application IDtjkv1uTPwJtdi0L06T6P2Q==
Document DescriptionAD651FOB_User Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize80.84kB (1010447 bits)
Date Submitted2018-08-31 00:00:00
Date Available2018-09-03 00:00:00
Creation Date2018-08-29 18:43:26
Producing SoftwareMicrosoft: Print To PDF
Document Lastmod2018-08-29 18:43:26
Document TitleAD651FOB_User Manual
Document Author: MRT

AD651 FOB Talk Switch
Adding a talk switch to Axient Digital ADX series transmitters adds remote pushrbutton routing options tor the audio outputs or Axient Digital Am receive
ers To activate audic routing. press and hold the talk switch button
Battery Installation
install the battery to power the talk switch
t. Open the oattery cover.
2.
insert the battery with the polarity as shown.
3 Replace the battery cover
Assigning a Talk Switch to a Transmitter
Choosing Receiver Audio Output Routing
Talk switch routing is ccntigured in the channel menu or the receiver.
The oohhguration options let you sWitoh the roilowmg receiver outputs by
pressing the button.
- XLR
- TRS
- AESS
. Dante
t. From the channel menu ot the receiver select:
Advanced > Talk Switch/Output Routing.
2. Use the control wheel to select output routing options:
- Normal: Output will toiiow the Onion selections when the button is released
- Pressed Outpu| WIII tollow the On/ou selections when the outton is pressed
3. Select Exit to save and return to the Channel menu
Talk Switch/Output Routing
XLR
TRS AESH" Dante
NORMAL: Off On On On
DRESSED: On off On On
* HESS swlta't IS on. AESS 1&2 and 3am are muted
Note: in the example shown. The XLFl output iiiiili turn otl when the switch is
pressed and the TRS output will turn on.
To enable remote controli the talk switch needs to be assigned using the TalKSw parameter at the transmitter menu.
1. Navlgate to the Utllltles menu ol‘ the transmltter and select Talk SW
2 Select 0 to add a talk switch.
3.
Press the talk sWitch outton twice to assign the taih switch. The display Will show the talk switch model name to coniirrn assignment.
Press the talk switch button to confirm control The talk swltch Icon and battery status will appear with each push of the button
Talk Switch
5. Select X to exit.
Tip: To unassign a talk switch, highlight the Switch name in the transmitter Tathw menu and select V
El]
Press 0 to conlirrn
Routing the Audio Output with the Talk Switch
When the talk switch is pressedl the receiver audio is routed lathe selectecl output Reieasing the switch returns the routing tn the normal signal paths.
Tip' The Colol oi‘ the channei icon on the recelver dispiay invens when the taik swltCh is pressed
< > View I 515 cm
IChanneI1o" ''il 02 “.5351,”
2 Channel2 0" 6Q!5.925uuz
Specifications
Dimensions (H x w x L) 15 x 25 x114 mm10,71 x 110 x 4.50 in.)
Weight (without battery) 37 9 (1,3 02,)
Housing Materiai ABS Plastic
Switch Material ABS Plastic
Operating Temperature 48°C (0°F) to 50°C (122°F)'
Stcrage Temperature 29°C (-20°F) to 74°C (165°F)‘
RF Output Zlgbee
Battery Type (not inciuded) AAA (1.5 V)
‘Battery characteristics may limit this range.
Certifications
Meets essential requirements oi the loilowing European Directives:
~ EMC Directive 2004/108/EC
- Baflevy Directive 2006/66/EC
Piease ioliow you! regionai recycling scheme ior battery disposal
SH" “ united states, Canada, Latin Europe, Middle East. Alvica: Asia, Pac
Amencz, Caribbean: 5M5 Empe GmbH shure Asia Limited
5““ '“‘°"’°’3‘e“ Jakobrflleflenbachelrsll i2. 22W, [’25 “was he“
L e c e N DA av
5300 West Tauhy Avcmlc Nallh Paint, Isiand East
as: Fe R MAN c E" NileLILGWiAAGUBuSA 75““ EWWE’“ Ema” Hang Kong
Phone 84776002000 Phone +4977262792490 F‘hunp 3527259374290
Fax MrsaaeizizlusAl Fax +437726273249ii4 Fax. SEQ-2893405:
Fax 34760076446 Emali inio©shuie de Emaii inin@shule.com hit
Email infm’rbxhule (uni PT. GOSNEM SWARA INDONESIA
Kampiens Harm Mangga Du: Eiok L Na 35 Jakaru Puszt
i 16 GSI31 00501 0211
fl
FCC STATEMENT FOR USERS
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
SECTION 15.21
The user’s manual or instruction manual for an intentional or unintentional radiator
shall caution the user that changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment. In cases where the manual is provided only in a form other than paper,
such as on a computer disk or over the Internet, the information required by this
section may be included in the manual in that alternative form, provided the user
can reasonably be expected to have the capability to access information in that
form.
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT, SECTION
15.105(b)
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications, However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Industry Canada (IC)
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the
followmg two conditions:
(1)This device may not cause harmful interference. and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Cet appareil est conforme aux RSSs exempts de licence d'lndustrie Canada. Le
fonctionnement est soumis aux deux conditions suivantes:
(1) Get appareil ne doit pas causer d'intei'ferences nuisibles et
(2) cet appareil doit accepter toute interference recue, y compris les interferences pouvant
causer un fonctionnement inde’sirable.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Warning                         : Info object (56 0 obj) not found at 1008966
EXIF Metadata provided by EXIF.tools
FCC ID Filing: DD4AD651FOB

Navigation menu