Shure orporated AXT200B Wireless Microphone Transmitter User Manual Exhibit D Users Manual per 2 1033 b3

Shure Incorporated Wireless Microphone Transmitter Exhibit D Users Manual per 2 1033 b3

Contents

Exhibit D Users Manual per 2 1033 b3

AXT200 Handheld Frequency Diversity Transmitter©2011 Shure Incorporated27A15018 (Rev. 1) Printed in USA
READ these instructions.1. KEEP these instructions.2. HEED all warnings.3. FOLLOW all instructions.4. DO NOT use this apparatus near water.5. CLEAN ONLY with dry cloth.6. DO NOT block any ventilation openings. Install in accordance with 7. the manufacturer’s instructions. DO NOT install near any heat sources such as radiators, heat 8. registers, stoves, or other apparatus (including ampliers) that produce heat.DO NOT defeat the safety purpose of the polarized or grounding-9. type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.PROTECT the power cord from being walked on or pinched, 10. particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.ONLY USE attachments/accessories specied by the 11. manufacturer.12. UNPLUG this apparatus during lightning storms or when unused 13. for long periods of time.REFER all servicing to qualied service personnel. Servicing is 14. required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.DO NOT expose the apparatus to dripping and splashing. DO 15. NOT put objects lled with liquids, such as vases, on the appara-tus.The MAINS plug or an appliance coupler shall remain readily oper-16. able. The airborne noise of the Apparatus does not exceed 70dB (A).17. Apparatus with CLASS I construction shall be connected to a 18. MAINS socket outlet with a protective earthing connection.To reduce the risk of re or electric shock, do not expose this ap-19. paratus to rain or moisture.Do not attempt to modify this product. Doing so could result in 20. personal injury and/or product failure. IMPORTANT SAFETY INSTRUCTIONSUSE only with a cart, stand, tripod, bracket, or table speci-ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.This symbol indicates that dangerous voltage constituting arisk of electric shock is present within this unit.This symbol indicates that there are important operating andmaintenance instructions in the literature accompanying this unit.WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. WARNING• Battery packs may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat above 212°F (100°C), or incinerate• Follow instructions from manufacturer• Never put batteries in mouth. If swallowed, contact your physician or local poison control center• Do not short circuit; may cause burns or catch fire• Do not charge or use battery packs with other than specified Shure products• Dispose of battery packs properly. Check with local vendor for proper disposal of used battery packsWARNING: No user-serviceable parts inside. Refer all servicing to qualified service personnel.
5Optional AccessoriesHandheld Rechargeable Battery AXT920 or AXT920SLPortable Handheld Charging StationAXT9041-AA Battery Carrier for AXT200 Handheld TransmitterAXT921Talk Switch (may not be available in all regions)AXT651 or AXT651 SLMicrophone Stand Adaptor WA371Shure Microphone Cartridges:SM58 RPW112 BETA 87A RPW120SM86 RPW114 BETA 87C RPW122SM87A RPW116 KSM9 Champagne RPW180VP68 RPW124 KSM9 Black RPW184BETA 58A RPW118AXT200 Axient Handheld Transmitter The AXT200 Handheld Frequency Diversity Transmitter is a rechargeable, remotely controllable handheld transmitter with Frequency Diversity for seamless, uninterrupted audio in even the most challenging RF environments. In addition to Frequency Diversity, the AXT200 delivers ultra-linear RF performance for more channels on-air and superb audio quality. Its advanced power management supports extended battery life and highly accurate status metering. ShowLink™ Remote Control enables comprehensive real-time remote control of all transmitter parameters, including real-time frequency adjustments. Features Transmitter Overview Included ComponentsHandheld Rechargeable Battery (2) AXT920 or AXT920SLTransmitter Carrying Case 95A15475Zipper Bag 26A14Microphone Stand Adaptor WA371Choice of (1) Shure Microphone Cartridge from the following list:SM58 RPW112 BETA 87C RPW122BETA 58A RPW118 KSM9 Champagne RPW180BETA 87A RPW120 KSM9 Black RPW184• Frequency Diversity enables simultaneous transmission on two independent frequencies to ensure seamless, uninterrupted audio for mission-critical transmitters. Single carrier mode is available if Frequency Diversity is not required.• Ultra-linear RF performance enables more channels on-air • IR Sync function automatically tunes transmitter to the receiver frequency • Comprehensive real-time remote control of all transmitter parameters when a Linked transmitter is within range of a ShowLink Access Point• Shure lithium-ion rechargeable battery delivers up to 9 hours of runtime from a single charge • Advanced control menu to adjust frequency and audio settings from the transmitter • 42 dB of adjustable gain for optimal audio quality• Lockable user interface prevents accidental or inadvertent changes to controls once settings are made ① Microphone Cartridge Interchangeable with a variety of Shure cartridges ② LCD Display View menu screens and settings. Momentarily press power button to activate backlight. ③ Infrared (IR) Port Use for automated transmitter programming. Links transmitter to AXT400 Receiver④ Shure Rechargeable Lithium-ion Battery Delivers up to 9 hours of runtime from a single charge⑤ Locking Ring Secures the battery and protects the control buttons ⑥ Dual-Band Antenna Covers UHF tuning range and 2.4 GHz ShowLink signal⑦ Arrow Buttons Use to scroll through menu screens and to change parameter values ⑧ Set Button Enables parameter editing. After editing is complete, press to save changes and return to the main menu screen ⑨ Power Button Hold for 1 second to turn the transmitter on. To power off, press and hold for 2 seconds until the display reads “Powering Off”. When editing parameters, acts as an exit button to cancel changes and return to a previous parameter or to the main menu screen. 1set245679831
6Remove the battery Unscrew the locking ring Batteries Axient transmitters are powered by a Shure lithium-ion rechargeable battery. Caution: Turn off the transmitter before changing batteries. Note: Refer to your battery charger manual for charging instructions. Battery RuntimeBattery runtime varies according to the transmitter’s operating mode. High power settings or operating in Frequency Diversity mode will reduce battery runtime.Remaining battery runtime is shown on the display in hours and minutes (accurate to within 15 minutes).The times shown in the table represent a battery with a minimum of 5 charge cycles, fully charged, at 100% health. RF Power Mode Runtime10 mW Single Carrier 9:45Frequency Diversity 6:4050 mW Single Carrier 8:00Frequency Diversity 4:4011<Unlinked>F1: 525.725F2: 585.625}|9:254 56621783Main Menu Screen The main menu screen displays the following transmitter parameters: ① Link Status • Linked : Displays Linked receiver channel name • Unlinked : Not Linked to a receiver ② Frequency 1 Tuned frequency 1 of the transmitter ③ Frequency 2 Tuned frequency 2 of the transmitter (Frequency Diversity mode enabled) ④ Battery Charge Indicator 5-segment icon visually indicates battery life ⑤ Remaining Battery Life Displays remaining battery life in hours and minutes ⑥ Showlink Icon Indicates remote control of transmitter possible via ShowLink is possible⑦ Audio Meter Indicates the audio signal level ⑧ Control Lock Icon Displayed when buttons are locked Locking the Buttons Lock the buttons of the transmitter to prevent accidental or unauthorized parameter changes.Press and hold the ▼ and ▲ buttons for 2 seconds to lock. Repeat to unlock. Power-on RF Mute The transmitter can be powered-on in RF Mute mode to prevent transmission of the audio signal. Press and hold the ▼ button during power-on until the RF Muted message is displayed. Linking a Transmitter using IR SyncThe IR Sync function forms a Link and sets the frequency between the transmitter and an AXT400 Receiver.Using an AXT200 for Frequency DiversityOperating an AXT200 in Frequency Diversity mode with an AXT400 receiver enables simultaneous transmission of audio on 2 independent frequencies.1. From the AXT400 Receiver menu: Radio > Options > Diversity2. Use the control wheel to set the mode to On-Handheld.3. Use the IR Sync function to Link the transmitter to the receiver.navigate navigate control monitor powerclippush12 pushenterexitaudioRFaudioRFsyncAXT40 0A 470-698 MHzDual Wireless ReceiverA BOLA BOL1. Align the IR Sync ports of the transmitter and the receiver. The red IR Sync LED on the front panel of the receiver will illuminate to indicate correct alignment.2. Access the IR Sync function in the AXT400 Receiver menu: Tx > Sync3. The receiver display indicates if the IR Sync is successful. Check the transmitter alignment and select Retry if a failure occurs.The transmitter device ID will be shown in the receiver Tx menu and the receiver channel name and frequency will be shown on the transmitter display, indicating a successful IR Sync.
7Group (G) and Channel (Ch)A group is a set of compatible frequencies. A single frequency within a group is a channel.Navigate to the F1 or F2 group and channel menus to make changes.G: Change the groupCh: Change the channelFrequencyNavigate to the F1 menu to edit frequency 1 or to the F2 menu to edit frequency 2.Use the set and arrow keys to change the frequency in 25 kHz increments.F2: ON or OFFON: Frequency Diversity mode OFF: single carrier mode Note: This function is available in the F2: frequency menu and the F2 group and channel menu. GainAdjust the gain to set the input sensitivity level. Gain range is -10 to +32 dB in 1 dB steps.FirmwareDisplays the firmware version installed in the transmitter Device IDThe Device ID identifies the transmitter on a network in WWB software or when Linked to a receiver. • ID length can be up to 8 characters • Use arrow buttons to scroll through characters • Use set button to save and move to the next character AA TypeSets the AA battery type (Alkaline, NiMH, Lithium) to ensure accurate battery metering when using the optional AXT921 Battery Carrier. The AA menu is only displayed when the transmitter is powered by the carrier.ShowLink TestActivates the ShowLink test 5-bar display to measure the remote control range of a ShowLink Access Point. • 5 bars indicate the center of the coverage area • 1 bar indicates the outer boundary of the coverage area • If bars are not displayed, ShowLink control is not available RF PWRFrom the main menu screen, press and hold the set button and the ▼ button to edit the RF power level. Use lower power settings to conserve battery life and to prevent RF overload at the receiver.Note: A password is required in some regions. PCB Serial NumberUse this menu to view the serial number of the printed circuit board (PCB) installed in the unit.1. From the main menu screen, press and hold the ▼ and “set” buttons to enter the RF Power screen.2. Press the▲ button to access the serial number.3. Momentarily press the power button to return to the home menu screen.Troubleshooting No ShowLink AlertThis alert appears when frequency is edited on a linked transmitter that is beyond the range of an active ShowLink access point. Choose OK to unlink the transmitter and complete the frequency change, or Cancel to return to the home screen.Input Overload The Input Overload message indicates an excessive signal level at the transmitter input. To prevent overload, reduce the gain setting. Firmware Updates Firmware is embedded software used to control features and the user interface. Periodically, new versions of firmware are available for download from www.shure.com/wwb to incorporate additional features and enhancements. New versions of the firmware can be downloaded to AXT400 Receiver using the Firmware Update Manager tool available in WWB6 software and installed on the transmitter using the infrared ports on the transmitter and receiver.To access the AXT400 receiver firmware update menu: Tx > IR Presets > FW UpdateParameter Menus To adjust transmitter settings, use the arrow buttons to access and edit the parameter menus.RF MuteDisables or enables the RF carrier signal. TX On: RF signal enabledTX Off: RF signal disabledUnlinkThe Unlink command ends the Linking relationship between a transmitter and a receiver. YES: Ends the Link between a transmitter and a receiver. NO: Preserves the Link between a transmitter and a receiver. Note: When a transmitter is Unlinked, the channel name will revert to Unlinked. Deeply Discharged BatteriesDeep discharge occurs when a battery is discharged to less than 3.0 volts. The battery chargers have a Recovery mode designed to restore charge to a deeply discharged battery. When the charger detects a deeply discharged battery, it automatically enters Recovery mode which supplies reduced current to the battery for up to 30 minutes. If recovery is successful, the charger will exit Recovery mode and charge the battery to capacity. If the battery cannot be recharged, charging stops and the battery must be replaced.
8Specifications- AXT200 Handheld TransmitterRF Carrier Frequency Range470–814 MHzNote: varies by regionWorking Range Under typical conditions: 150 m (500 ft)Line of Sight, outdoors for a single system: 500 m (1600 ft)Note: Actual range depends on RF signal absorption, reflection and interference.Audio Frequency Response40 – 18 kHz (+1, -3 dB)Note: Dependent on microphone typeRF Tuning Step Size25 kHzModulation45 kHz max. deviationFM, Audio Reference Companding with pre- and de-emphasisDynamic Range >113 dB, A-weighted (referenced at 0 dB set-ting on the transmitter)Total Harmonic Distortion45 kHz max. deviation<0.3%, A-weighted, typicalSystem Audio PolarityPositive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.AXT200Gain Adjustment Range-10 to +32 dB (in 1 dB steps)Battery Type Shure AXT920/920SL (Rechargeable Li-Ion)Battery Life up to 9 hours (low power mode, Single Carrier Mode)Dimensions 261 mm x 37 mm (10.3 in. x 2.6 in.) L x Dia.Weight 395 g (13.9 oz.), with batteriesHousing Machined aluminumOperating Temperature Range-18°C (0°F) to 63°C (145°F)Note: Battery characteristics may limit this range.Storage Temperature Range-29°C (-20°F) to 74°C (165°F)Note: Battery characteristics may limit this range.Audio InputConfiguration UnbalancedImpedance >30 kΩMaximum Input Level1 kHz at 1% THDGain Setting: −10 to +11 dB: 5.5 dBu+12 to +32 dB: −6.5 dBuRF OutputConnector SMA (UHF and ShowLink); Shell=Ground, Center=SignalAntenna Type Integrated Dual Band HelicalPower See Frequency Range and Ouput Power tableMode Frequency Diversity: Dual CarrierSingle Carrier: Single CarrierImpedance 50 ΩShowLinkNetwork Type IEEE 802.15.4Frequency Range 2.40 to 2.4835 GHz (16 Channels)RF Output Power 10 dBm (ERP)Tables and DiagramsFrequency Range and Transmitter Output PowerBand Frequency Range ( MHz) Power ( mW)G1 470 to 530 10/50G1E 470 to 530 10/50H4 518 to 578 10/50H4E 518 to 578 10/50J5 578 to 638 10/50J5E 578 to 638 10/50K4E 606 to 666 10/50L3 638 to 698 10/50L3E 638 to 698 10/50L3HK 638 to 698 10M8 666 to 730 10/50P8 710 to 790 10/50P9 710 to 787 10/50Q5 740 to 814 10/50Q5HK 740 to 814 10MA24 779 to 806 10MJBX 806 to 810 10
9CertificationsMeets essential requirements of European R&TTE Directive 99/5/EC, eligible to bear the CE mark:WEEE Directive 2002/95/EC as amended by 2008/34/EC.RoHS Directive 2002/95/EC as amended by 2008/35/EC. Meets requirements of EMC standards EN 300 328, EN 300 422 Parts 1 and 2, and EN 301 489 Parts 1 and 9. Certified under FCC Part 15 and FCC Part 74. Certified in Canada by IC to RSS-123 and RSS-210. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. FCC ID: DD4AXT200. IC: 616A-AXT200. Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representatives. For contact information please visit www.shure.com The CE Declaration of Conformity can be obtained from: www.shure.com/europe/complianceAuthorized European representative:Shure Europe GmbHHeadquarters Europe, Middle East & AfricaDepartment: EMEA ApprovalWannenacker Str. 28D-74078 Heilbronn, GermanyPhone: +49 7131 72 14 0Fax: +49 7131 72 14 14Email: EMEAsupport@shure.deTransmitterAXT100 Bodypackgain = 0dBAXT200 Handheldgain = 0dBUR1 Bodypackgain = 0dBsens = 0dBUR1M Bodypackgain = 0dBsens = 0dBUR2 Handheldgain = 0dBReceiver gain setting = 0dBAXT400 +10dB gain +15dB gain +15dB gain +15dB gain +15dB gainUR4 N/A N/A +18dB gain +18dB gain +18dB gainSystem GainSystem gain from transmitter input to Receiver XLR output (line) when transmitter gain = 0 dBInformation to the userThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Licensing InformationLicensing: A ministerial licence to operate this equipment may be required in certain areas. Consult your national authority for possible requirements.Changes or modification not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.
www.shure.com ©2011 Shure IncorporatedEurope, Middle East, Africa:Shure Europe GmbHWannenäckestr. 28,74078 Heilbronn, GermanyPhone: 49-7131-72140Fax: 49-7131-721414Email: info@shure.deAsia, Pacific:Shure Asia Limited22/F, 625 King’s RoadNorth Point, Island EastHong KongPhone: 852-2893-4290Fax: 852-2893-4055Email: info@shure.com.hkUnited States, Canada, Latin America, Caribbean:Shure Incorporated5800 West Touhy AvenueNiles, IL 60714-4608 USAPhone: 847-600-2000Fax: 847-600-1212 (USA)Fax: 847-600-6446Email: info@shure.com

Navigation menu